2 Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
3 Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
4 Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
5 Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
7 Based on the original rt2800pci.c and rt2800usb.c.
8 Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
9 Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
10 Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
11 Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
12 Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
13 Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
14 <http://rt2x00.serialmonkey.com>
16 This program is free software; you can redistribute it and/or modify
17 it under the terms of the GNU General Public License as published by
18 the Free Software Foundation; either version 2 of the License, or
19 (at your option) any later version.
21 This program is distributed in the hope that it will be useful,
22 but WITHOUT ANY WARRANTY; without even the implied warranty of
23 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 GNU General Public License for more details.
26 You should have received a copy of the GNU General Public License
27 along with this program; if not, see <http://www.gnu.org/licenses/>.
32 Abstract: rt2800 generic device routines.
35 #include <linux/crc-ccitt.h>
36 #include <linux/kernel.h>
37 #include <linux/module.h>
38 #include <linux/slab.h>
41 #include "rt2800lib.h"
46 * All access to the CSR registers will go through the methods
47 * rt2800_register_read and rt2800_register_write.
48 * BBP and RF register require indirect register access,
49 * and use the CSR registers BBPCSR and RFCSR to achieve this.
50 * These indirect registers work with busy bits,
51 * and we will try maximal REGISTER_BUSY_COUNT times to access
52 * the register while taking a REGISTER_BUSY_DELAY us delay
53 * between each attampt. When the busy bit is still set at that time,
54 * the access attempt is considered to have failed,
55 * and we will print an error.
56 * The _lock versions must be used if you already hold the csr_mutex
58 #define WAIT_FOR_BBP(__dev, __reg) \
59 rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
60 #define WAIT_FOR_RFCSR(__dev, __reg) \
61 rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
62 #define WAIT_FOR_RF(__dev, __reg) \
63 rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
64 #define WAIT_FOR_MCU(__dev, __reg) \
65 rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
66 H2M_MAILBOX_CSR_OWNER, (__reg))
68 static inline bool rt2800_is_305x_soc(struct rt2x00_dev
*rt2x00dev
)
70 /* check for rt2872 on SoC */
71 if (!rt2x00_is_soc(rt2x00dev
) ||
72 !rt2x00_rt(rt2x00dev
, RT2872
))
75 /* we know for sure that these rf chipsets are used on rt305x boards */
76 if (rt2x00_rf(rt2x00dev
, RF3020
) ||
77 rt2x00_rf(rt2x00dev
, RF3021
) ||
78 rt2x00_rf(rt2x00dev
, RF3022
))
81 rt2x00_warn(rt2x00dev
, "Unknown RF chipset on rt305x\n");
85 static void rt2800_bbp_write(struct rt2x00_dev
*rt2x00dev
,
86 const unsigned int word
, const u8 value
)
90 mutex_lock(&rt2x00dev
->csr_mutex
);
93 * Wait until the BBP becomes available, afterwards we
94 * can safely write the new data into the register.
96 if (WAIT_FOR_BBP(rt2x00dev
, ®
)) {
98 rt2x00_set_field32(®
, BBP_CSR_CFG_VALUE
, value
);
99 rt2x00_set_field32(®
, BBP_CSR_CFG_REGNUM
, word
);
100 rt2x00_set_field32(®
, BBP_CSR_CFG_BUSY
, 1);
101 rt2x00_set_field32(®
, BBP_CSR_CFG_READ_CONTROL
, 0);
102 rt2x00_set_field32(®
, BBP_CSR_CFG_BBP_RW_MODE
, 1);
104 rt2800_register_write_lock(rt2x00dev
, BBP_CSR_CFG
, reg
);
107 mutex_unlock(&rt2x00dev
->csr_mutex
);
110 static void rt2800_bbp_read(struct rt2x00_dev
*rt2x00dev
,
111 const unsigned int word
, u8
*value
)
115 mutex_lock(&rt2x00dev
->csr_mutex
);
118 * Wait until the BBP becomes available, afterwards we
119 * can safely write the read request into the register.
120 * After the data has been written, we wait until hardware
121 * returns the correct value, if at any time the register
122 * doesn't become available in time, reg will be 0xffffffff
123 * which means we return 0xff to the caller.
125 if (WAIT_FOR_BBP(rt2x00dev
, ®
)) {
127 rt2x00_set_field32(®
, BBP_CSR_CFG_REGNUM
, word
);
128 rt2x00_set_field32(®
, BBP_CSR_CFG_BUSY
, 1);
129 rt2x00_set_field32(®
, BBP_CSR_CFG_READ_CONTROL
, 1);
130 rt2x00_set_field32(®
, BBP_CSR_CFG_BBP_RW_MODE
, 1);
132 rt2800_register_write_lock(rt2x00dev
, BBP_CSR_CFG
, reg
);
134 WAIT_FOR_BBP(rt2x00dev
, ®
);
137 *value
= rt2x00_get_field32(reg
, BBP_CSR_CFG_VALUE
);
139 mutex_unlock(&rt2x00dev
->csr_mutex
);
142 static void rt2800_rfcsr_write(struct rt2x00_dev
*rt2x00dev
,
143 const unsigned int word
, const u8 value
)
147 mutex_lock(&rt2x00dev
->csr_mutex
);
150 * Wait until the RFCSR becomes available, afterwards we
151 * can safely write the new data into the register.
153 if (WAIT_FOR_RFCSR(rt2x00dev
, ®
)) {
155 rt2x00_set_field32(®
, RF_CSR_CFG_DATA
, value
);
156 rt2x00_set_field32(®
, RF_CSR_CFG_REGNUM
, word
);
157 rt2x00_set_field32(®
, RF_CSR_CFG_WRITE
, 1);
158 rt2x00_set_field32(®
, RF_CSR_CFG_BUSY
, 1);
160 rt2800_register_write_lock(rt2x00dev
, RF_CSR_CFG
, reg
);
163 mutex_unlock(&rt2x00dev
->csr_mutex
);
166 static void rt2800_rfcsr_read(struct rt2x00_dev
*rt2x00dev
,
167 const unsigned int word
, u8
*value
)
171 mutex_lock(&rt2x00dev
->csr_mutex
);
174 * Wait until the RFCSR becomes available, afterwards we
175 * can safely write the read request into the register.
176 * After the data has been written, we wait until hardware
177 * returns the correct value, if at any time the register
178 * doesn't become available in time, reg will be 0xffffffff
179 * which means we return 0xff to the caller.
181 if (WAIT_FOR_RFCSR(rt2x00dev
, ®
)) {
183 rt2x00_set_field32(®
, RF_CSR_CFG_REGNUM
, word
);
184 rt2x00_set_field32(®
, RF_CSR_CFG_WRITE
, 0);
185 rt2x00_set_field32(®
, RF_CSR_CFG_BUSY
, 1);
187 rt2800_register_write_lock(rt2x00dev
, RF_CSR_CFG
, reg
);
189 WAIT_FOR_RFCSR(rt2x00dev
, ®
);
192 *value
= rt2x00_get_field32(reg
, RF_CSR_CFG_DATA
);
194 mutex_unlock(&rt2x00dev
->csr_mutex
);
197 static void rt2800_rf_write(struct rt2x00_dev
*rt2x00dev
,
198 const unsigned int word
, const u32 value
)
202 mutex_lock(&rt2x00dev
->csr_mutex
);
205 * Wait until the RF becomes available, afterwards we
206 * can safely write the new data into the register.
208 if (WAIT_FOR_RF(rt2x00dev
, ®
)) {
210 rt2x00_set_field32(®
, RF_CSR_CFG0_REG_VALUE_BW
, value
);
211 rt2x00_set_field32(®
, RF_CSR_CFG0_STANDBYMODE
, 0);
212 rt2x00_set_field32(®
, RF_CSR_CFG0_SEL
, 0);
213 rt2x00_set_field32(®
, RF_CSR_CFG0_BUSY
, 1);
215 rt2800_register_write_lock(rt2x00dev
, RF_CSR_CFG0
, reg
);
216 rt2x00_rf_write(rt2x00dev
, word
, value
);
219 mutex_unlock(&rt2x00dev
->csr_mutex
);
222 static const unsigned int rt2800_eeprom_map
[EEPROM_WORD_COUNT
] = {
223 [EEPROM_CHIP_ID
] = 0x0000,
224 [EEPROM_VERSION
] = 0x0001,
225 [EEPROM_MAC_ADDR_0
] = 0x0002,
226 [EEPROM_MAC_ADDR_1
] = 0x0003,
227 [EEPROM_MAC_ADDR_2
] = 0x0004,
228 [EEPROM_NIC_CONF0
] = 0x001a,
229 [EEPROM_NIC_CONF1
] = 0x001b,
230 [EEPROM_FREQ
] = 0x001d,
231 [EEPROM_LED_AG_CONF
] = 0x001e,
232 [EEPROM_LED_ACT_CONF
] = 0x001f,
233 [EEPROM_LED_POLARITY
] = 0x0020,
234 [EEPROM_NIC_CONF2
] = 0x0021,
235 [EEPROM_LNA
] = 0x0022,
236 [EEPROM_RSSI_BG
] = 0x0023,
237 [EEPROM_RSSI_BG2
] = 0x0024,
238 [EEPROM_TXMIXER_GAIN_BG
] = 0x0024, /* overlaps with RSSI_BG2 */
239 [EEPROM_RSSI_A
] = 0x0025,
240 [EEPROM_RSSI_A2
] = 0x0026,
241 [EEPROM_TXMIXER_GAIN_A
] = 0x0026, /* overlaps with RSSI_A2 */
242 [EEPROM_EIRP_MAX_TX_POWER
] = 0x0027,
243 [EEPROM_TXPOWER_DELTA
] = 0x0028,
244 [EEPROM_TXPOWER_BG1
] = 0x0029,
245 [EEPROM_TXPOWER_BG2
] = 0x0030,
246 [EEPROM_TSSI_BOUND_BG1
] = 0x0037,
247 [EEPROM_TSSI_BOUND_BG2
] = 0x0038,
248 [EEPROM_TSSI_BOUND_BG3
] = 0x0039,
249 [EEPROM_TSSI_BOUND_BG4
] = 0x003a,
250 [EEPROM_TSSI_BOUND_BG5
] = 0x003b,
251 [EEPROM_TXPOWER_A1
] = 0x003c,
252 [EEPROM_TXPOWER_A2
] = 0x0053,
253 [EEPROM_TSSI_BOUND_A1
] = 0x006a,
254 [EEPROM_TSSI_BOUND_A2
] = 0x006b,
255 [EEPROM_TSSI_BOUND_A3
] = 0x006c,
256 [EEPROM_TSSI_BOUND_A4
] = 0x006d,
257 [EEPROM_TSSI_BOUND_A5
] = 0x006e,
258 [EEPROM_TXPOWER_BYRATE
] = 0x006f,
259 [EEPROM_BBP_START
] = 0x0078,
262 static const unsigned int rt2800_eeprom_map_ext
[EEPROM_WORD_COUNT
] = {
263 [EEPROM_CHIP_ID
] = 0x0000,
264 [EEPROM_VERSION
] = 0x0001,
265 [EEPROM_MAC_ADDR_0
] = 0x0002,
266 [EEPROM_MAC_ADDR_1
] = 0x0003,
267 [EEPROM_MAC_ADDR_2
] = 0x0004,
268 [EEPROM_NIC_CONF0
] = 0x001a,
269 [EEPROM_NIC_CONF1
] = 0x001b,
270 [EEPROM_NIC_CONF2
] = 0x001c,
271 [EEPROM_EIRP_MAX_TX_POWER
] = 0x0020,
272 [EEPROM_FREQ
] = 0x0022,
273 [EEPROM_LED_AG_CONF
] = 0x0023,
274 [EEPROM_LED_ACT_CONF
] = 0x0024,
275 [EEPROM_LED_POLARITY
] = 0x0025,
276 [EEPROM_LNA
] = 0x0026,
277 [EEPROM_EXT_LNA2
] = 0x0027,
278 [EEPROM_RSSI_BG
] = 0x0028,
279 [EEPROM_RSSI_BG2
] = 0x0029,
280 [EEPROM_RSSI_A
] = 0x002a,
281 [EEPROM_RSSI_A2
] = 0x002b,
282 [EEPROM_TXPOWER_BG1
] = 0x0030,
283 [EEPROM_TXPOWER_BG2
] = 0x0037,
284 [EEPROM_EXT_TXPOWER_BG3
] = 0x003e,
285 [EEPROM_TSSI_BOUND_BG1
] = 0x0045,
286 [EEPROM_TSSI_BOUND_BG2
] = 0x0046,
287 [EEPROM_TSSI_BOUND_BG3
] = 0x0047,
288 [EEPROM_TSSI_BOUND_BG4
] = 0x0048,
289 [EEPROM_TSSI_BOUND_BG5
] = 0x0049,
290 [EEPROM_TXPOWER_A1
] = 0x004b,
291 [EEPROM_TXPOWER_A2
] = 0x0065,
292 [EEPROM_EXT_TXPOWER_A3
] = 0x007f,
293 [EEPROM_TSSI_BOUND_A1
] = 0x009a,
294 [EEPROM_TSSI_BOUND_A2
] = 0x009b,
295 [EEPROM_TSSI_BOUND_A3
] = 0x009c,
296 [EEPROM_TSSI_BOUND_A4
] = 0x009d,
297 [EEPROM_TSSI_BOUND_A5
] = 0x009e,
298 [EEPROM_TXPOWER_BYRATE
] = 0x00a0,
301 static unsigned int rt2800_eeprom_word_index(struct rt2x00_dev
*rt2x00dev
,
302 const enum rt2800_eeprom_word word
)
304 const unsigned int *map
;
307 if (WARN_ONCE(word
>= EEPROM_WORD_COUNT
,
308 "%s: invalid EEPROM word %d\n",
309 wiphy_name(rt2x00dev
->hw
->wiphy
), word
))
312 if (rt2x00_rt(rt2x00dev
, RT3593
))
313 map
= rt2800_eeprom_map_ext
;
315 map
= rt2800_eeprom_map
;
319 /* Index 0 is valid only for EEPROM_CHIP_ID.
320 * Otherwise it means that the offset of the
321 * given word is not initialized in the map,
322 * or that the field is not usable on the
325 WARN_ONCE(word
!= EEPROM_CHIP_ID
&& index
== 0,
326 "%s: invalid access of EEPROM word %d\n",
327 wiphy_name(rt2x00dev
->hw
->wiphy
), word
);
332 static void *rt2800_eeprom_addr(struct rt2x00_dev
*rt2x00dev
,
333 const enum rt2800_eeprom_word word
)
337 index
= rt2800_eeprom_word_index(rt2x00dev
, word
);
338 return rt2x00_eeprom_addr(rt2x00dev
, index
);
341 static void rt2800_eeprom_read(struct rt2x00_dev
*rt2x00dev
,
342 const enum rt2800_eeprom_word word
, u16
*data
)
346 index
= rt2800_eeprom_word_index(rt2x00dev
, word
);
347 rt2x00_eeprom_read(rt2x00dev
, index
, data
);
350 static void rt2800_eeprom_write(struct rt2x00_dev
*rt2x00dev
,
351 const enum rt2800_eeprom_word word
, u16 data
)
355 index
= rt2800_eeprom_word_index(rt2x00dev
, word
);
356 rt2x00_eeprom_write(rt2x00dev
, index
, data
);
359 static void rt2800_eeprom_read_from_array(struct rt2x00_dev
*rt2x00dev
,
360 const enum rt2800_eeprom_word array
,
366 index
= rt2800_eeprom_word_index(rt2x00dev
, array
);
367 rt2x00_eeprom_read(rt2x00dev
, index
+ offset
, data
);
370 static int rt2800_enable_wlan_rt3290(struct rt2x00_dev
*rt2x00dev
)
375 rt2800_register_read(rt2x00dev
, WLAN_FUN_CTRL
, ®
);
376 if (rt2x00_get_field32(reg
, WLAN_EN
))
379 rt2x00_set_field32(®
, WLAN_GPIO_OUT_OE_BIT_ALL
, 0xff);
380 rt2x00_set_field32(®
, FRC_WL_ANT_SET
, 1);
381 rt2x00_set_field32(®
, WLAN_CLK_EN
, 0);
382 rt2x00_set_field32(®
, WLAN_EN
, 1);
383 rt2800_register_write(rt2x00dev
, WLAN_FUN_CTRL
, reg
);
385 udelay(REGISTER_BUSY_DELAY
);
390 * Check PLL_LD & XTAL_RDY.
392 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
393 rt2800_register_read(rt2x00dev
, CMB_CTRL
, ®
);
394 if (rt2x00_get_field32(reg
, PLL_LD
) &&
395 rt2x00_get_field32(reg
, XTAL_RDY
))
397 udelay(REGISTER_BUSY_DELAY
);
400 if (i
>= REGISTER_BUSY_COUNT
) {
405 rt2800_register_write(rt2x00dev
, 0x58, 0x018);
406 udelay(REGISTER_BUSY_DELAY
);
407 rt2800_register_write(rt2x00dev
, 0x58, 0x418);
408 udelay(REGISTER_BUSY_DELAY
);
409 rt2800_register_write(rt2x00dev
, 0x58, 0x618);
410 udelay(REGISTER_BUSY_DELAY
);
416 rt2800_register_read(rt2x00dev
, WLAN_FUN_CTRL
, ®
);
417 rt2x00_set_field32(®
, PCIE_APP0_CLK_REQ
, 0);
418 rt2x00_set_field32(®
, WLAN_CLK_EN
, 1);
419 rt2x00_set_field32(®
, WLAN_RESET
, 1);
420 rt2800_register_write(rt2x00dev
, WLAN_FUN_CTRL
, reg
);
422 rt2x00_set_field32(®
, WLAN_RESET
, 0);
423 rt2800_register_write(rt2x00dev
, WLAN_FUN_CTRL
, reg
);
425 rt2800_register_write(rt2x00dev
, INT_SOURCE_CSR
, 0x7fffffff);
426 } while (count
!= 0);
431 void rt2800_mcu_request(struct rt2x00_dev
*rt2x00dev
,
432 const u8 command
, const u8 token
,
433 const u8 arg0
, const u8 arg1
)
438 * SOC devices don't support MCU requests.
440 if (rt2x00_is_soc(rt2x00dev
))
443 mutex_lock(&rt2x00dev
->csr_mutex
);
446 * Wait until the MCU becomes available, afterwards we
447 * can safely write the new data into the register.
449 if (WAIT_FOR_MCU(rt2x00dev
, ®
)) {
450 rt2x00_set_field32(®
, H2M_MAILBOX_CSR_OWNER
, 1);
451 rt2x00_set_field32(®
, H2M_MAILBOX_CSR_CMD_TOKEN
, token
);
452 rt2x00_set_field32(®
, H2M_MAILBOX_CSR_ARG0
, arg0
);
453 rt2x00_set_field32(®
, H2M_MAILBOX_CSR_ARG1
, arg1
);
454 rt2800_register_write_lock(rt2x00dev
, H2M_MAILBOX_CSR
, reg
);
457 rt2x00_set_field32(®
, HOST_CMD_CSR_HOST_COMMAND
, command
);
458 rt2800_register_write_lock(rt2x00dev
, HOST_CMD_CSR
, reg
);
461 mutex_unlock(&rt2x00dev
->csr_mutex
);
463 EXPORT_SYMBOL_GPL(rt2800_mcu_request
);
465 int rt2800_wait_csr_ready(struct rt2x00_dev
*rt2x00dev
)
470 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
471 rt2800_register_read(rt2x00dev
, MAC_CSR0
, ®
);
472 if (reg
&& reg
!= ~0)
477 rt2x00_err(rt2x00dev
, "Unstable hardware\n");
480 EXPORT_SYMBOL_GPL(rt2800_wait_csr_ready
);
482 int rt2800_wait_wpdma_ready(struct rt2x00_dev
*rt2x00dev
)
488 * Some devices are really slow to respond here. Wait a whole second
491 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
492 rt2800_register_read(rt2x00dev
, WPDMA_GLO_CFG
, ®
);
493 if (!rt2x00_get_field32(reg
, WPDMA_GLO_CFG_TX_DMA_BUSY
) &&
494 !rt2x00_get_field32(reg
, WPDMA_GLO_CFG_RX_DMA_BUSY
))
500 rt2x00_err(rt2x00dev
, "WPDMA TX/RX busy [0x%08x]\n", reg
);
503 EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready
);
505 void rt2800_disable_wpdma(struct rt2x00_dev
*rt2x00dev
)
509 rt2800_register_read(rt2x00dev
, WPDMA_GLO_CFG
, ®
);
510 rt2x00_set_field32(®
, WPDMA_GLO_CFG_ENABLE_TX_DMA
, 0);
511 rt2x00_set_field32(®
, WPDMA_GLO_CFG_TX_DMA_BUSY
, 0);
512 rt2x00_set_field32(®
, WPDMA_GLO_CFG_ENABLE_RX_DMA
, 0);
513 rt2x00_set_field32(®
, WPDMA_GLO_CFG_RX_DMA_BUSY
, 0);
514 rt2x00_set_field32(®
, WPDMA_GLO_CFG_TX_WRITEBACK_DONE
, 1);
515 rt2800_register_write(rt2x00dev
, WPDMA_GLO_CFG
, reg
);
517 EXPORT_SYMBOL_GPL(rt2800_disable_wpdma
);
519 void rt2800_get_txwi_rxwi_size(struct rt2x00_dev
*rt2x00dev
,
520 unsigned short *txwi_size
,
521 unsigned short *rxwi_size
)
523 switch (rt2x00dev
->chip
.rt
) {
525 *txwi_size
= TXWI_DESC_SIZE_4WORDS
;
526 *rxwi_size
= RXWI_DESC_SIZE_5WORDS
;
530 *txwi_size
= TXWI_DESC_SIZE_5WORDS
;
531 *rxwi_size
= RXWI_DESC_SIZE_6WORDS
;
535 *txwi_size
= TXWI_DESC_SIZE_4WORDS
;
536 *rxwi_size
= RXWI_DESC_SIZE_4WORDS
;
540 EXPORT_SYMBOL_GPL(rt2800_get_txwi_rxwi_size
);
542 static bool rt2800_check_firmware_crc(const u8
*data
, const size_t len
)
548 * The last 2 bytes in the firmware array are the crc checksum itself,
549 * this means that we should never pass those 2 bytes to the crc
552 fw_crc
= (data
[len
- 2] << 8 | data
[len
- 1]);
555 * Use the crc ccitt algorithm.
556 * This will return the same value as the legacy driver which
557 * used bit ordering reversion on the both the firmware bytes
558 * before input input as well as on the final output.
559 * Obviously using crc ccitt directly is much more efficient.
561 crc
= crc_ccitt(~0, data
, len
- 2);
564 * There is a small difference between the crc-itu-t + bitrev and
565 * the crc-ccitt crc calculation. In the latter method the 2 bytes
566 * will be swapped, use swab16 to convert the crc to the correct
571 return fw_crc
== crc
;
574 int rt2800_check_firmware(struct rt2x00_dev
*rt2x00dev
,
575 const u8
*data
, const size_t len
)
582 * PCI(e) & SOC devices require firmware with a length
583 * of 8kb. USB devices require firmware files with a length
584 * of 4kb. Certain USB chipsets however require different firmware,
585 * which Ralink only provides attached to the original firmware
586 * file. Thus for USB devices, firmware files have a length
587 * which is a multiple of 4kb. The firmware for rt3290 chip also
588 * have a length which is a multiple of 4kb.
590 if (rt2x00_is_usb(rt2x00dev
) || rt2x00_rt(rt2x00dev
, RT3290
))
597 * Validate the firmware length
599 if (len
!= fw_len
&& (!multiple
|| (len
% fw_len
) != 0))
600 return FW_BAD_LENGTH
;
603 * Check if the chipset requires one of the upper parts
606 if (rt2x00_is_usb(rt2x00dev
) &&
607 !rt2x00_rt(rt2x00dev
, RT2860
) &&
608 !rt2x00_rt(rt2x00dev
, RT2872
) &&
609 !rt2x00_rt(rt2x00dev
, RT3070
) &&
610 ((len
/ fw_len
) == 1))
611 return FW_BAD_VERSION
;
614 * 8kb firmware files must be checked as if it were
615 * 2 separate firmware files.
617 while (offset
< len
) {
618 if (!rt2800_check_firmware_crc(data
+ offset
, fw_len
))
626 EXPORT_SYMBOL_GPL(rt2800_check_firmware
);
628 int rt2800_load_firmware(struct rt2x00_dev
*rt2x00dev
,
629 const u8
*data
, const size_t len
)
635 if (rt2x00_rt(rt2x00dev
, RT3290
)) {
636 retval
= rt2800_enable_wlan_rt3290(rt2x00dev
);
642 * If driver doesn't wake up firmware here,
643 * rt2800_load_firmware will hang forever when interface is up again.
645 rt2800_register_write(rt2x00dev
, AUTOWAKEUP_CFG
, 0x00000000);
648 * Wait for stable hardware.
650 if (rt2800_wait_csr_ready(rt2x00dev
))
653 if (rt2x00_is_pci(rt2x00dev
)) {
654 if (rt2x00_rt(rt2x00dev
, RT3290
) ||
655 rt2x00_rt(rt2x00dev
, RT3572
) ||
656 rt2x00_rt(rt2x00dev
, RT5390
) ||
657 rt2x00_rt(rt2x00dev
, RT5392
)) {
658 rt2800_register_read(rt2x00dev
, AUX_CTRL
, ®
);
659 rt2x00_set_field32(®
, AUX_CTRL_FORCE_PCIE_CLK
, 1);
660 rt2x00_set_field32(®
, AUX_CTRL_WAKE_PCIE_EN
, 1);
661 rt2800_register_write(rt2x00dev
, AUX_CTRL
, reg
);
663 rt2800_register_write(rt2x00dev
, PWR_PIN_CFG
, 0x00000002);
666 rt2800_disable_wpdma(rt2x00dev
);
669 * Write firmware to the device.
671 rt2800_drv_write_firmware(rt2x00dev
, data
, len
);
674 * Wait for device to stabilize.
676 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
677 rt2800_register_read(rt2x00dev
, PBF_SYS_CTRL
, ®
);
678 if (rt2x00_get_field32(reg
, PBF_SYS_CTRL_READY
))
683 if (i
== REGISTER_BUSY_COUNT
) {
684 rt2x00_err(rt2x00dev
, "PBF system register not ready\n");
689 * Disable DMA, will be reenabled later when enabling
692 rt2800_disable_wpdma(rt2x00dev
);
695 * Initialize firmware.
697 rt2800_register_write(rt2x00dev
, H2M_BBP_AGENT
, 0);
698 rt2800_register_write(rt2x00dev
, H2M_MAILBOX_CSR
, 0);
699 if (rt2x00_is_usb(rt2x00dev
)) {
700 rt2800_register_write(rt2x00dev
, H2M_INT_SRC
, 0);
701 rt2800_mcu_request(rt2x00dev
, MCU_BOOT_SIGNAL
, 0, 0, 0);
707 EXPORT_SYMBOL_GPL(rt2800_load_firmware
);
709 void rt2800_write_tx_data(struct queue_entry
*entry
,
710 struct txentry_desc
*txdesc
)
712 __le32
*txwi
= rt2800_drv_get_txwi(entry
);
717 * Initialize TX Info descriptor
719 rt2x00_desc_read(txwi
, 0, &word
);
720 rt2x00_set_field32(&word
, TXWI_W0_FRAG
,
721 test_bit(ENTRY_TXD_MORE_FRAG
, &txdesc
->flags
));
722 rt2x00_set_field32(&word
, TXWI_W0_MIMO_PS
,
723 test_bit(ENTRY_TXD_HT_MIMO_PS
, &txdesc
->flags
));
724 rt2x00_set_field32(&word
, TXWI_W0_CF_ACK
, 0);
725 rt2x00_set_field32(&word
, TXWI_W0_TS
,
726 test_bit(ENTRY_TXD_REQ_TIMESTAMP
, &txdesc
->flags
));
727 rt2x00_set_field32(&word
, TXWI_W0_AMPDU
,
728 test_bit(ENTRY_TXD_HT_AMPDU
, &txdesc
->flags
));
729 rt2x00_set_field32(&word
, TXWI_W0_MPDU_DENSITY
,
730 txdesc
->u
.ht
.mpdu_density
);
731 rt2x00_set_field32(&word
, TXWI_W0_TX_OP
, txdesc
->u
.ht
.txop
);
732 rt2x00_set_field32(&word
, TXWI_W0_MCS
, txdesc
->u
.ht
.mcs
);
733 rt2x00_set_field32(&word
, TXWI_W0_BW
,
734 test_bit(ENTRY_TXD_HT_BW_40
, &txdesc
->flags
));
735 rt2x00_set_field32(&word
, TXWI_W0_SHORT_GI
,
736 test_bit(ENTRY_TXD_HT_SHORT_GI
, &txdesc
->flags
));
737 rt2x00_set_field32(&word
, TXWI_W0_STBC
, txdesc
->u
.ht
.stbc
);
738 rt2x00_set_field32(&word
, TXWI_W0_PHYMODE
, txdesc
->rate_mode
);
739 rt2x00_desc_write(txwi
, 0, word
);
741 rt2x00_desc_read(txwi
, 1, &word
);
742 rt2x00_set_field32(&word
, TXWI_W1_ACK
,
743 test_bit(ENTRY_TXD_ACK
, &txdesc
->flags
));
744 rt2x00_set_field32(&word
, TXWI_W1_NSEQ
,
745 test_bit(ENTRY_TXD_GENERATE_SEQ
, &txdesc
->flags
));
746 rt2x00_set_field32(&word
, TXWI_W1_BW_WIN_SIZE
, txdesc
->u
.ht
.ba_size
);
747 rt2x00_set_field32(&word
, TXWI_W1_WIRELESS_CLI_ID
,
748 test_bit(ENTRY_TXD_ENCRYPT
, &txdesc
->flags
) ?
749 txdesc
->key_idx
: txdesc
->u
.ht
.wcid
);
750 rt2x00_set_field32(&word
, TXWI_W1_MPDU_TOTAL_BYTE_COUNT
,
752 rt2x00_set_field32(&word
, TXWI_W1_PACKETID_QUEUE
, entry
->queue
->qid
);
753 rt2x00_set_field32(&word
, TXWI_W1_PACKETID_ENTRY
, (entry
->entry_idx
% 3) + 1);
754 rt2x00_desc_write(txwi
, 1, word
);
757 * Always write 0 to IV/EIV fields (word 2 and 3), hardware will insert
758 * the IV from the IVEIV register when TXD_W3_WIV is set to 0.
759 * When TXD_W3_WIV is set to 1 it will use the IV data
760 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
761 * crypto entry in the registers should be used to encrypt the frame.
763 * Nulify all remaining words as well, we don't know how to program them.
765 for (i
= 2; i
< entry
->queue
->winfo_size
/ sizeof(__le32
); i
++)
766 _rt2x00_desc_write(txwi
, i
, 0);
768 EXPORT_SYMBOL_GPL(rt2800_write_tx_data
);
770 static int rt2800_agc_to_rssi(struct rt2x00_dev
*rt2x00dev
, u32 rxwi_w2
)
772 s8 rssi0
= rt2x00_get_field32(rxwi_w2
, RXWI_W2_RSSI0
);
773 s8 rssi1
= rt2x00_get_field32(rxwi_w2
, RXWI_W2_RSSI1
);
774 s8 rssi2
= rt2x00_get_field32(rxwi_w2
, RXWI_W2_RSSI2
);
780 if (rt2x00dev
->curr_band
== IEEE80211_BAND_2GHZ
) {
781 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_BG
, &eeprom
);
782 offset0
= rt2x00_get_field16(eeprom
, EEPROM_RSSI_BG_OFFSET0
);
783 offset1
= rt2x00_get_field16(eeprom
, EEPROM_RSSI_BG_OFFSET1
);
784 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_BG2
, &eeprom
);
785 offset2
= rt2x00_get_field16(eeprom
, EEPROM_RSSI_BG2_OFFSET2
);
787 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_A
, &eeprom
);
788 offset0
= rt2x00_get_field16(eeprom
, EEPROM_RSSI_A_OFFSET0
);
789 offset1
= rt2x00_get_field16(eeprom
, EEPROM_RSSI_A_OFFSET1
);
790 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_A2
, &eeprom
);
791 offset2
= rt2x00_get_field16(eeprom
, EEPROM_RSSI_A2_OFFSET2
);
795 * Convert the value from the descriptor into the RSSI value
796 * If the value in the descriptor is 0, it is considered invalid
797 * and the default (extremely low) rssi value is assumed
799 rssi0
= (rssi0
) ? (-12 - offset0
- rt2x00dev
->lna_gain
- rssi0
) : -128;
800 rssi1
= (rssi1
) ? (-12 - offset1
- rt2x00dev
->lna_gain
- rssi1
) : -128;
801 rssi2
= (rssi2
) ? (-12 - offset2
- rt2x00dev
->lna_gain
- rssi2
) : -128;
804 * mac80211 only accepts a single RSSI value. Calculating the
805 * average doesn't deliver a fair answer either since -60:-60 would
806 * be considered equally good as -50:-70 while the second is the one
807 * which gives less energy...
809 rssi0
= max(rssi0
, rssi1
);
810 return (int)max(rssi0
, rssi2
);
813 void rt2800_process_rxwi(struct queue_entry
*entry
,
814 struct rxdone_entry_desc
*rxdesc
)
816 __le32
*rxwi
= (__le32
*) entry
->skb
->data
;
819 rt2x00_desc_read(rxwi
, 0, &word
);
821 rxdesc
->cipher
= rt2x00_get_field32(word
, RXWI_W0_UDF
);
822 rxdesc
->size
= rt2x00_get_field32(word
, RXWI_W0_MPDU_TOTAL_BYTE_COUNT
);
824 rt2x00_desc_read(rxwi
, 1, &word
);
826 if (rt2x00_get_field32(word
, RXWI_W1_SHORT_GI
))
827 rxdesc
->flags
|= RX_FLAG_SHORT_GI
;
829 if (rt2x00_get_field32(word
, RXWI_W1_BW
))
830 rxdesc
->flags
|= RX_FLAG_40MHZ
;
833 * Detect RX rate, always use MCS as signal type.
835 rxdesc
->dev_flags
|= RXDONE_SIGNAL_MCS
;
836 rxdesc
->signal
= rt2x00_get_field32(word
, RXWI_W1_MCS
);
837 rxdesc
->rate_mode
= rt2x00_get_field32(word
, RXWI_W1_PHYMODE
);
840 * Mask of 0x8 bit to remove the short preamble flag.
842 if (rxdesc
->rate_mode
== RATE_MODE_CCK
)
843 rxdesc
->signal
&= ~0x8;
845 rt2x00_desc_read(rxwi
, 2, &word
);
848 * Convert descriptor AGC value to RSSI value.
850 rxdesc
->rssi
= rt2800_agc_to_rssi(entry
->queue
->rt2x00dev
, word
);
852 * Remove RXWI descriptor from start of the buffer.
854 skb_pull(entry
->skb
, entry
->queue
->winfo_size
);
856 EXPORT_SYMBOL_GPL(rt2800_process_rxwi
);
858 void rt2800_txdone_entry(struct queue_entry
*entry
, u32 status
, __le32
*txwi
)
860 struct rt2x00_dev
*rt2x00dev
= entry
->queue
->rt2x00dev
;
861 struct skb_frame_desc
*skbdesc
= get_skb_frame_desc(entry
->skb
);
862 struct txdone_entry_desc txdesc
;
868 * Obtain the status about this packet.
871 rt2x00_desc_read(txwi
, 0, &word
);
873 mcs
= rt2x00_get_field32(word
, TXWI_W0_MCS
);
874 ampdu
= rt2x00_get_field32(word
, TXWI_W0_AMPDU
);
876 real_mcs
= rt2x00_get_field32(status
, TX_STA_FIFO_MCS
);
877 aggr
= rt2x00_get_field32(status
, TX_STA_FIFO_TX_AGGRE
);
880 * If a frame was meant to be sent as a single non-aggregated MPDU
881 * but ended up in an aggregate the used tx rate doesn't correlate
882 * with the one specified in the TXWI as the whole aggregate is sent
883 * with the same rate.
885 * For example: two frames are sent to rt2x00, the first one sets
886 * AMPDU=1 and requests MCS7 whereas the second frame sets AMDPU=0
887 * and requests MCS15. If the hw aggregates both frames into one
888 * AMDPU the tx status for both frames will contain MCS7 although
889 * the frame was sent successfully.
891 * Hence, replace the requested rate with the real tx rate to not
892 * confuse the rate control algortihm by providing clearly wrong
895 if (unlikely(aggr
== 1 && ampdu
== 0 && real_mcs
!= mcs
)) {
896 skbdesc
->tx_rate_idx
= real_mcs
;
900 if (aggr
== 1 || ampdu
== 1)
901 __set_bit(TXDONE_AMPDU
, &txdesc
.flags
);
904 * Ralink has a retry mechanism using a global fallback
905 * table. We setup this fallback table to try the immediate
906 * lower rate for all rates. In the TX_STA_FIFO, the MCS field
907 * always contains the MCS used for the last transmission, be
908 * it successful or not.
910 if (rt2x00_get_field32(status
, TX_STA_FIFO_TX_SUCCESS
)) {
912 * Transmission succeeded. The number of retries is
915 __set_bit(TXDONE_SUCCESS
, &txdesc
.flags
);
916 txdesc
.retry
= ((mcs
> real_mcs
) ? mcs
- real_mcs
: 0);
919 * Transmission failed. The number of retries is
920 * always 7 in this case (for a total number of 8
923 __set_bit(TXDONE_FAILURE
, &txdesc
.flags
);
924 txdesc
.retry
= rt2x00dev
->long_retry
;
928 * the frame was retried at least once
929 * -> hw used fallback rates
932 __set_bit(TXDONE_FALLBACK
, &txdesc
.flags
);
934 rt2x00lib_txdone(entry
, &txdesc
);
936 EXPORT_SYMBOL_GPL(rt2800_txdone_entry
);
938 static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev
*rt2x00dev
,
941 return HW_BEACON_BASE(index
);
944 static inline u8
rt2800_get_beacon_offset(struct rt2x00_dev
*rt2x00dev
,
947 return BEACON_BASE_TO_OFFSET(rt2800_hw_beacon_base(rt2x00dev
, index
));
950 void rt2800_write_beacon(struct queue_entry
*entry
, struct txentry_desc
*txdesc
)
952 struct rt2x00_dev
*rt2x00dev
= entry
->queue
->rt2x00dev
;
953 struct skb_frame_desc
*skbdesc
= get_skb_frame_desc(entry
->skb
);
954 unsigned int beacon_base
;
955 unsigned int padding_len
;
957 const int txwi_desc_size
= entry
->queue
->winfo_size
;
960 * Disable beaconing while we are reloading the beacon data,
961 * otherwise we might be sending out invalid data.
963 rt2800_register_read(rt2x00dev
, BCN_TIME_CFG
, ®
);
965 rt2x00_set_field32(®
, BCN_TIME_CFG_BEACON_GEN
, 0);
966 rt2800_register_write(rt2x00dev
, BCN_TIME_CFG
, reg
);
969 * Add space for the TXWI in front of the skb.
971 memset(skb_push(entry
->skb
, txwi_desc_size
), 0, txwi_desc_size
);
974 * Register descriptor details in skb frame descriptor.
976 skbdesc
->flags
|= SKBDESC_DESC_IN_SKB
;
977 skbdesc
->desc
= entry
->skb
->data
;
978 skbdesc
->desc_len
= txwi_desc_size
;
981 * Add the TXWI for the beacon to the skb.
983 rt2800_write_tx_data(entry
, txdesc
);
986 * Dump beacon to userspace through debugfs.
988 rt2x00debug_dump_frame(rt2x00dev
, DUMP_FRAME_BEACON
, entry
->skb
);
991 * Write entire beacon with TXWI and padding to register.
993 padding_len
= roundup(entry
->skb
->len
, 4) - entry
->skb
->len
;
994 if (padding_len
&& skb_pad(entry
->skb
, padding_len
)) {
995 rt2x00_err(rt2x00dev
, "Failure padding beacon, aborting\n");
996 /* skb freed by skb_pad() on failure */
998 rt2800_register_write(rt2x00dev
, BCN_TIME_CFG
, orig_reg
);
1002 beacon_base
= rt2800_hw_beacon_base(rt2x00dev
, entry
->entry_idx
);
1004 rt2800_register_multiwrite(rt2x00dev
, beacon_base
, entry
->skb
->data
,
1005 entry
->skb
->len
+ padding_len
);
1008 * Enable beaconing again.
1010 rt2x00_set_field32(®
, BCN_TIME_CFG_BEACON_GEN
, 1);
1011 rt2800_register_write(rt2x00dev
, BCN_TIME_CFG
, reg
);
1014 * Clean up beacon skb.
1016 dev_kfree_skb_any(entry
->skb
);
1019 EXPORT_SYMBOL_GPL(rt2800_write_beacon
);
1021 static inline void rt2800_clear_beacon_register(struct rt2x00_dev
*rt2x00dev
,
1025 const int txwi_desc_size
= rt2x00dev
->bcn
->winfo_size
;
1026 unsigned int beacon_base
;
1028 beacon_base
= rt2800_hw_beacon_base(rt2x00dev
, index
);
1031 * For the Beacon base registers we only need to clear
1032 * the whole TXWI which (when set to 0) will invalidate
1033 * the entire beacon.
1035 for (i
= 0; i
< txwi_desc_size
; i
+= sizeof(__le32
))
1036 rt2800_register_write(rt2x00dev
, beacon_base
+ i
, 0);
1039 void rt2800_clear_beacon(struct queue_entry
*entry
)
1041 struct rt2x00_dev
*rt2x00dev
= entry
->queue
->rt2x00dev
;
1045 * Disable beaconing while we are reloading the beacon data,
1046 * otherwise we might be sending out invalid data.
1048 rt2800_register_read(rt2x00dev
, BCN_TIME_CFG
, ®
);
1049 rt2x00_set_field32(®
, BCN_TIME_CFG_BEACON_GEN
, 0);
1050 rt2800_register_write(rt2x00dev
, BCN_TIME_CFG
, reg
);
1055 rt2800_clear_beacon_register(rt2x00dev
, entry
->entry_idx
);
1058 * Enabled beaconing again.
1060 rt2x00_set_field32(®
, BCN_TIME_CFG_BEACON_GEN
, 1);
1061 rt2800_register_write(rt2x00dev
, BCN_TIME_CFG
, reg
);
1063 EXPORT_SYMBOL_GPL(rt2800_clear_beacon
);
1065 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1066 const struct rt2x00debug rt2800_rt2x00debug
= {
1067 .owner
= THIS_MODULE
,
1069 .read
= rt2800_register_read
,
1070 .write
= rt2800_register_write
,
1071 .flags
= RT2X00DEBUGFS_OFFSET
,
1072 .word_base
= CSR_REG_BASE
,
1073 .word_size
= sizeof(u32
),
1074 .word_count
= CSR_REG_SIZE
/ sizeof(u32
),
1077 /* NOTE: The local EEPROM access functions can't
1078 * be used here, use the generic versions instead.
1080 .read
= rt2x00_eeprom_read
,
1081 .write
= rt2x00_eeprom_write
,
1082 .word_base
= EEPROM_BASE
,
1083 .word_size
= sizeof(u16
),
1084 .word_count
= EEPROM_SIZE
/ sizeof(u16
),
1087 .read
= rt2800_bbp_read
,
1088 .write
= rt2800_bbp_write
,
1089 .word_base
= BBP_BASE
,
1090 .word_size
= sizeof(u8
),
1091 .word_count
= BBP_SIZE
/ sizeof(u8
),
1094 .read
= rt2x00_rf_read
,
1095 .write
= rt2800_rf_write
,
1096 .word_base
= RF_BASE
,
1097 .word_size
= sizeof(u32
),
1098 .word_count
= RF_SIZE
/ sizeof(u32
),
1101 .read
= rt2800_rfcsr_read
,
1102 .write
= rt2800_rfcsr_write
,
1103 .word_base
= RFCSR_BASE
,
1104 .word_size
= sizeof(u8
),
1105 .word_count
= RFCSR_SIZE
/ sizeof(u8
),
1108 EXPORT_SYMBOL_GPL(rt2800_rt2x00debug
);
1109 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1111 int rt2800_rfkill_poll(struct rt2x00_dev
*rt2x00dev
)
1115 if (rt2x00_rt(rt2x00dev
, RT3290
)) {
1116 rt2800_register_read(rt2x00dev
, WLAN_FUN_CTRL
, ®
);
1117 return rt2x00_get_field32(reg
, WLAN_GPIO_IN_BIT0
);
1119 rt2800_register_read(rt2x00dev
, GPIO_CTRL
, ®
);
1120 return rt2x00_get_field32(reg
, GPIO_CTRL_VAL2
);
1123 EXPORT_SYMBOL_GPL(rt2800_rfkill_poll
);
1125 #ifdef CONFIG_RT2X00_LIB_LEDS
1126 static void rt2800_brightness_set(struct led_classdev
*led_cdev
,
1127 enum led_brightness brightness
)
1129 struct rt2x00_led
*led
=
1130 container_of(led_cdev
, struct rt2x00_led
, led_dev
);
1131 unsigned int enabled
= brightness
!= LED_OFF
;
1132 unsigned int bg_mode
=
1133 (enabled
&& led
->rt2x00dev
->curr_band
== IEEE80211_BAND_2GHZ
);
1134 unsigned int polarity
=
1135 rt2x00_get_field16(led
->rt2x00dev
->led_mcu_reg
,
1136 EEPROM_FREQ_LED_POLARITY
);
1137 unsigned int ledmode
=
1138 rt2x00_get_field16(led
->rt2x00dev
->led_mcu_reg
,
1139 EEPROM_FREQ_LED_MODE
);
1142 /* Check for SoC (SOC devices don't support MCU requests) */
1143 if (rt2x00_is_soc(led
->rt2x00dev
)) {
1144 rt2800_register_read(led
->rt2x00dev
, LED_CFG
, ®
);
1146 /* Set LED Polarity */
1147 rt2x00_set_field32(®
, LED_CFG_LED_POLAR
, polarity
);
1150 if (led
->type
== LED_TYPE_RADIO
) {
1151 rt2x00_set_field32(®
, LED_CFG_G_LED_MODE
,
1153 } else if (led
->type
== LED_TYPE_ASSOC
) {
1154 rt2x00_set_field32(®
, LED_CFG_Y_LED_MODE
,
1156 } else if (led
->type
== LED_TYPE_QUALITY
) {
1157 rt2x00_set_field32(®
, LED_CFG_R_LED_MODE
,
1161 rt2800_register_write(led
->rt2x00dev
, LED_CFG
, reg
);
1164 if (led
->type
== LED_TYPE_RADIO
) {
1165 rt2800_mcu_request(led
->rt2x00dev
, MCU_LED
, 0xff, ledmode
,
1166 enabled
? 0x20 : 0);
1167 } else if (led
->type
== LED_TYPE_ASSOC
) {
1168 rt2800_mcu_request(led
->rt2x00dev
, MCU_LED
, 0xff, ledmode
,
1169 enabled
? (bg_mode
? 0x60 : 0xa0) : 0x20);
1170 } else if (led
->type
== LED_TYPE_QUALITY
) {
1172 * The brightness is divided into 6 levels (0 - 5),
1173 * The specs tell us the following levels:
1174 * 0, 1 ,3, 7, 15, 31
1175 * to determine the level in a simple way we can simply
1176 * work with bitshifting:
1179 rt2800_mcu_request(led
->rt2x00dev
, MCU_LED_STRENGTH
, 0xff,
1180 (1 << brightness
/ (LED_FULL
/ 6)) - 1,
1186 static void rt2800_init_led(struct rt2x00_dev
*rt2x00dev
,
1187 struct rt2x00_led
*led
, enum led_type type
)
1189 led
->rt2x00dev
= rt2x00dev
;
1191 led
->led_dev
.brightness_set
= rt2800_brightness_set
;
1192 led
->flags
= LED_INITIALIZED
;
1194 #endif /* CONFIG_RT2X00_LIB_LEDS */
1197 * Configuration handlers.
1199 static void rt2800_config_wcid(struct rt2x00_dev
*rt2x00dev
,
1203 struct mac_wcid_entry wcid_entry
;
1206 offset
= MAC_WCID_ENTRY(wcid
);
1208 memset(&wcid_entry
, 0xff, sizeof(wcid_entry
));
1210 memcpy(wcid_entry
.mac
, address
, ETH_ALEN
);
1212 rt2800_register_multiwrite(rt2x00dev
, offset
,
1213 &wcid_entry
, sizeof(wcid_entry
));
1216 static void rt2800_delete_wcid_attr(struct rt2x00_dev
*rt2x00dev
, int wcid
)
1219 offset
= MAC_WCID_ATTR_ENTRY(wcid
);
1220 rt2800_register_write(rt2x00dev
, offset
, 0);
1223 static void rt2800_config_wcid_attr_bssidx(struct rt2x00_dev
*rt2x00dev
,
1224 int wcid
, u32 bssidx
)
1226 u32 offset
= MAC_WCID_ATTR_ENTRY(wcid
);
1230 * The BSS Idx numbers is split in a main value of 3 bits,
1231 * and a extended field for adding one additional bit to the value.
1233 rt2800_register_read(rt2x00dev
, offset
, ®
);
1234 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_BSS_IDX
, (bssidx
& 0x7));
1235 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT
,
1236 (bssidx
& 0x8) >> 3);
1237 rt2800_register_write(rt2x00dev
, offset
, reg
);
1240 static void rt2800_config_wcid_attr_cipher(struct rt2x00_dev
*rt2x00dev
,
1241 struct rt2x00lib_crypto
*crypto
,
1242 struct ieee80211_key_conf
*key
)
1244 struct mac_iveiv_entry iveiv_entry
;
1248 offset
= MAC_WCID_ATTR_ENTRY(key
->hw_key_idx
);
1250 if (crypto
->cmd
== SET_KEY
) {
1251 rt2800_register_read(rt2x00dev
, offset
, ®
);
1252 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_KEYTAB
,
1253 !!(key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
));
1255 * Both the cipher as the BSS Idx numbers are split in a main
1256 * value of 3 bits, and a extended field for adding one additional
1259 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_CIPHER
,
1260 (crypto
->cipher
& 0x7));
1261 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_CIPHER_EXT
,
1262 (crypto
->cipher
& 0x8) >> 3);
1263 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_RX_WIUDF
, crypto
->cipher
);
1264 rt2800_register_write(rt2x00dev
, offset
, reg
);
1266 /* Delete the cipher without touching the bssidx */
1267 rt2800_register_read(rt2x00dev
, offset
, ®
);
1268 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_KEYTAB
, 0);
1269 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_CIPHER
, 0);
1270 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_CIPHER_EXT
, 0);
1271 rt2x00_set_field32(®
, MAC_WCID_ATTRIBUTE_RX_WIUDF
, 0);
1272 rt2800_register_write(rt2x00dev
, offset
, reg
);
1275 offset
= MAC_IVEIV_ENTRY(key
->hw_key_idx
);
1277 memset(&iveiv_entry
, 0, sizeof(iveiv_entry
));
1278 if ((crypto
->cipher
== CIPHER_TKIP
) ||
1279 (crypto
->cipher
== CIPHER_TKIP_NO_MIC
) ||
1280 (crypto
->cipher
== CIPHER_AES
))
1281 iveiv_entry
.iv
[3] |= 0x20;
1282 iveiv_entry
.iv
[3] |= key
->keyidx
<< 6;
1283 rt2800_register_multiwrite(rt2x00dev
, offset
,
1284 &iveiv_entry
, sizeof(iveiv_entry
));
1287 int rt2800_config_shared_key(struct rt2x00_dev
*rt2x00dev
,
1288 struct rt2x00lib_crypto
*crypto
,
1289 struct ieee80211_key_conf
*key
)
1291 struct hw_key_entry key_entry
;
1292 struct rt2x00_field32 field
;
1296 if (crypto
->cmd
== SET_KEY
) {
1297 key
->hw_key_idx
= (4 * crypto
->bssidx
) + key
->keyidx
;
1299 memcpy(key_entry
.key
, crypto
->key
,
1300 sizeof(key_entry
.key
));
1301 memcpy(key_entry
.tx_mic
, crypto
->tx_mic
,
1302 sizeof(key_entry
.tx_mic
));
1303 memcpy(key_entry
.rx_mic
, crypto
->rx_mic
,
1304 sizeof(key_entry
.rx_mic
));
1306 offset
= SHARED_KEY_ENTRY(key
->hw_key_idx
);
1307 rt2800_register_multiwrite(rt2x00dev
, offset
,
1308 &key_entry
, sizeof(key_entry
));
1312 * The cipher types are stored over multiple registers
1313 * starting with SHARED_KEY_MODE_BASE each word will have
1314 * 32 bits and contains the cipher types for 2 bssidx each.
1315 * Using the correct defines correctly will cause overhead,
1316 * so just calculate the correct offset.
1318 field
.bit_offset
= 4 * (key
->hw_key_idx
% 8);
1319 field
.bit_mask
= 0x7 << field
.bit_offset
;
1321 offset
= SHARED_KEY_MODE_ENTRY(key
->hw_key_idx
/ 8);
1323 rt2800_register_read(rt2x00dev
, offset
, ®
);
1324 rt2x00_set_field32(®
, field
,
1325 (crypto
->cmd
== SET_KEY
) * crypto
->cipher
);
1326 rt2800_register_write(rt2x00dev
, offset
, reg
);
1329 * Update WCID information
1331 rt2800_config_wcid(rt2x00dev
, crypto
->address
, key
->hw_key_idx
);
1332 rt2800_config_wcid_attr_bssidx(rt2x00dev
, key
->hw_key_idx
,
1334 rt2800_config_wcid_attr_cipher(rt2x00dev
, crypto
, key
);
1338 EXPORT_SYMBOL_GPL(rt2800_config_shared_key
);
1340 static inline int rt2800_find_wcid(struct rt2x00_dev
*rt2x00dev
)
1342 struct mac_wcid_entry wcid_entry
;
1347 * Search for the first free WCID entry and return the corresponding
1350 * Make sure the WCID starts _after_ the last possible shared key
1353 * Since parts of the pairwise key table might be shared with
1354 * the beacon frame buffers 6 & 7 we should only write into the
1355 * first 222 entries.
1357 for (idx
= 33; idx
<= 222; idx
++) {
1358 offset
= MAC_WCID_ENTRY(idx
);
1359 rt2800_register_multiread(rt2x00dev
, offset
, &wcid_entry
,
1360 sizeof(wcid_entry
));
1361 if (is_broadcast_ether_addr(wcid_entry
.mac
))
1366 * Use -1 to indicate that we don't have any more space in the WCID
1372 int rt2800_config_pairwise_key(struct rt2x00_dev
*rt2x00dev
,
1373 struct rt2x00lib_crypto
*crypto
,
1374 struct ieee80211_key_conf
*key
)
1376 struct hw_key_entry key_entry
;
1379 if (crypto
->cmd
== SET_KEY
) {
1381 * Allow key configuration only for STAs that are
1384 if (crypto
->wcid
< 0)
1386 key
->hw_key_idx
= crypto
->wcid
;
1388 memcpy(key_entry
.key
, crypto
->key
,
1389 sizeof(key_entry
.key
));
1390 memcpy(key_entry
.tx_mic
, crypto
->tx_mic
,
1391 sizeof(key_entry
.tx_mic
));
1392 memcpy(key_entry
.rx_mic
, crypto
->rx_mic
,
1393 sizeof(key_entry
.rx_mic
));
1395 offset
= PAIRWISE_KEY_ENTRY(key
->hw_key_idx
);
1396 rt2800_register_multiwrite(rt2x00dev
, offset
,
1397 &key_entry
, sizeof(key_entry
));
1401 * Update WCID information
1403 rt2800_config_wcid_attr_cipher(rt2x00dev
, crypto
, key
);
1407 EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key
);
1409 int rt2800_sta_add(struct rt2x00_dev
*rt2x00dev
, struct ieee80211_vif
*vif
,
1410 struct ieee80211_sta
*sta
)
1413 struct rt2x00_sta
*sta_priv
= sta_to_rt2x00_sta(sta
);
1416 * Find next free WCID.
1418 wcid
= rt2800_find_wcid(rt2x00dev
);
1421 * Store selected wcid even if it is invalid so that we can
1422 * later decide if the STA is uploaded into the hw.
1424 sta_priv
->wcid
= wcid
;
1427 * No space left in the device, however, we can still communicate
1428 * with the STA -> No error.
1434 * Clean up WCID attributes and write STA address to the device.
1436 rt2800_delete_wcid_attr(rt2x00dev
, wcid
);
1437 rt2800_config_wcid(rt2x00dev
, sta
->addr
, wcid
);
1438 rt2800_config_wcid_attr_bssidx(rt2x00dev
, wcid
,
1439 rt2x00lib_get_bssidx(rt2x00dev
, vif
));
1442 EXPORT_SYMBOL_GPL(rt2800_sta_add
);
1444 int rt2800_sta_remove(struct rt2x00_dev
*rt2x00dev
, int wcid
)
1447 * Remove WCID entry, no need to clean the attributes as they will
1448 * get renewed when the WCID is reused.
1450 rt2800_config_wcid(rt2x00dev
, NULL
, wcid
);
1454 EXPORT_SYMBOL_GPL(rt2800_sta_remove
);
1456 void rt2800_config_filter(struct rt2x00_dev
*rt2x00dev
,
1457 const unsigned int filter_flags
)
1462 * Start configuration steps.
1463 * Note that the version error will always be dropped
1464 * and broadcast frames will always be accepted since
1465 * there is no filter for it at this time.
1467 rt2800_register_read(rt2x00dev
, RX_FILTER_CFG
, ®
);
1468 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_CRC_ERROR
,
1469 !(filter_flags
& FIF_FCSFAIL
));
1470 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_PHY_ERROR
,
1471 !(filter_flags
& FIF_PLCPFAIL
));
1472 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_NOT_TO_ME
,
1473 !(filter_flags
& FIF_PROMISC_IN_BSS
));
1474 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_NOT_MY_BSSD
, 0);
1475 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_VER_ERROR
, 1);
1476 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_MULTICAST
,
1477 !(filter_flags
& FIF_ALLMULTI
));
1478 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_BROADCAST
, 0);
1479 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_DUPLICATE
, 1);
1480 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_CF_END_ACK
,
1481 !(filter_flags
& FIF_CONTROL
));
1482 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_CF_END
,
1483 !(filter_flags
& FIF_CONTROL
));
1484 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_ACK
,
1485 !(filter_flags
& FIF_CONTROL
));
1486 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_CTS
,
1487 !(filter_flags
& FIF_CONTROL
));
1488 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_RTS
,
1489 !(filter_flags
& FIF_CONTROL
));
1490 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_PSPOLL
,
1491 !(filter_flags
& FIF_PSPOLL
));
1492 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_BA
, 0);
1493 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_BAR
,
1494 !(filter_flags
& FIF_CONTROL
));
1495 rt2x00_set_field32(®
, RX_FILTER_CFG_DROP_CNTL
,
1496 !(filter_flags
& FIF_CONTROL
));
1497 rt2800_register_write(rt2x00dev
, RX_FILTER_CFG
, reg
);
1499 EXPORT_SYMBOL_GPL(rt2800_config_filter
);
1501 void rt2800_config_intf(struct rt2x00_dev
*rt2x00dev
, struct rt2x00_intf
*intf
,
1502 struct rt2x00intf_conf
*conf
, const unsigned int flags
)
1505 bool update_bssid
= false;
1507 if (flags
& CONFIG_UPDATE_TYPE
) {
1509 * Enable synchronisation.
1511 rt2800_register_read(rt2x00dev
, BCN_TIME_CFG
, ®
);
1512 rt2x00_set_field32(®
, BCN_TIME_CFG_TSF_SYNC
, conf
->sync
);
1513 rt2800_register_write(rt2x00dev
, BCN_TIME_CFG
, reg
);
1515 if (conf
->sync
== TSF_SYNC_AP_NONE
) {
1517 * Tune beacon queue transmit parameters for AP mode
1519 rt2800_register_read(rt2x00dev
, TBTT_SYNC_CFG
, ®
);
1520 rt2x00_set_field32(®
, TBTT_SYNC_CFG_BCN_CWMIN
, 0);
1521 rt2x00_set_field32(®
, TBTT_SYNC_CFG_BCN_AIFSN
, 1);
1522 rt2x00_set_field32(®
, TBTT_SYNC_CFG_BCN_EXP_WIN
, 32);
1523 rt2x00_set_field32(®
, TBTT_SYNC_CFG_TBTT_ADJUST
, 0);
1524 rt2800_register_write(rt2x00dev
, TBTT_SYNC_CFG
, reg
);
1526 rt2800_register_read(rt2x00dev
, TBTT_SYNC_CFG
, ®
);
1527 rt2x00_set_field32(®
, TBTT_SYNC_CFG_BCN_CWMIN
, 4);
1528 rt2x00_set_field32(®
, TBTT_SYNC_CFG_BCN_AIFSN
, 2);
1529 rt2x00_set_field32(®
, TBTT_SYNC_CFG_BCN_EXP_WIN
, 32);
1530 rt2x00_set_field32(®
, TBTT_SYNC_CFG_TBTT_ADJUST
, 16);
1531 rt2800_register_write(rt2x00dev
, TBTT_SYNC_CFG
, reg
);
1535 if (flags
& CONFIG_UPDATE_MAC
) {
1536 if (flags
& CONFIG_UPDATE_TYPE
&&
1537 conf
->sync
== TSF_SYNC_AP_NONE
) {
1539 * The BSSID register has to be set to our own mac
1540 * address in AP mode.
1542 memcpy(conf
->bssid
, conf
->mac
, sizeof(conf
->mac
));
1543 update_bssid
= true;
1546 if (!is_zero_ether_addr((const u8
*)conf
->mac
)) {
1547 reg
= le32_to_cpu(conf
->mac
[1]);
1548 rt2x00_set_field32(®
, MAC_ADDR_DW1_UNICAST_TO_ME_MASK
, 0xff);
1549 conf
->mac
[1] = cpu_to_le32(reg
);
1552 rt2800_register_multiwrite(rt2x00dev
, MAC_ADDR_DW0
,
1553 conf
->mac
, sizeof(conf
->mac
));
1556 if ((flags
& CONFIG_UPDATE_BSSID
) || update_bssid
) {
1557 if (!is_zero_ether_addr((const u8
*)conf
->bssid
)) {
1558 reg
= le32_to_cpu(conf
->bssid
[1]);
1559 rt2x00_set_field32(®
, MAC_BSSID_DW1_BSS_ID_MASK
, 3);
1560 rt2x00_set_field32(®
, MAC_BSSID_DW1_BSS_BCN_NUM
, 7);
1561 conf
->bssid
[1] = cpu_to_le32(reg
);
1564 rt2800_register_multiwrite(rt2x00dev
, MAC_BSSID_DW0
,
1565 conf
->bssid
, sizeof(conf
->bssid
));
1568 EXPORT_SYMBOL_GPL(rt2800_config_intf
);
1570 static void rt2800_config_ht_opmode(struct rt2x00_dev
*rt2x00dev
,
1571 struct rt2x00lib_erp
*erp
)
1573 bool any_sta_nongf
= !!(erp
->ht_opmode
&
1574 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT
);
1575 u8 protection
= erp
->ht_opmode
& IEEE80211_HT_OP_MODE_PROTECTION
;
1576 u8 mm20_mode
, mm40_mode
, gf20_mode
, gf40_mode
;
1577 u16 mm20_rate
, mm40_rate
, gf20_rate
, gf40_rate
;
1580 /* default protection rate for HT20: OFDM 24M */
1581 mm20_rate
= gf20_rate
= 0x4004;
1583 /* default protection rate for HT40: duplicate OFDM 24M */
1584 mm40_rate
= gf40_rate
= 0x4084;
1586 switch (protection
) {
1587 case IEEE80211_HT_OP_MODE_PROTECTION_NONE
:
1589 * All STAs in this BSS are HT20/40 but there might be
1590 * STAs not supporting greenfield mode.
1591 * => Disable protection for HT transmissions.
1593 mm20_mode
= mm40_mode
= gf20_mode
= gf40_mode
= 0;
1596 case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ
:
1598 * All STAs in this BSS are HT20 or HT20/40 but there
1599 * might be STAs not supporting greenfield mode.
1600 * => Protect all HT40 transmissions.
1602 mm20_mode
= gf20_mode
= 0;
1603 mm40_mode
= gf40_mode
= 2;
1606 case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER
:
1608 * Nonmember protection:
1609 * According to 802.11n we _should_ protect all
1610 * HT transmissions (but we don't have to).
1612 * But if cts_protection is enabled we _shall_ protect
1613 * all HT transmissions using a CCK rate.
1615 * And if any station is non GF we _shall_ protect
1618 * We decide to protect everything
1619 * -> fall through to mixed mode.
1621 case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED
:
1623 * Legacy STAs are present
1624 * => Protect all HT transmissions.
1626 mm20_mode
= mm40_mode
= gf20_mode
= gf40_mode
= 2;
1629 * If erp protection is needed we have to protect HT
1630 * transmissions with CCK 11M long preamble.
1632 if (erp
->cts_protection
) {
1633 /* don't duplicate RTS/CTS in CCK mode */
1634 mm20_rate
= mm40_rate
= 0x0003;
1635 gf20_rate
= gf40_rate
= 0x0003;
1640 /* check for STAs not supporting greenfield mode */
1642 gf20_mode
= gf40_mode
= 2;
1644 /* Update HT protection config */
1645 rt2800_register_read(rt2x00dev
, MM20_PROT_CFG
, ®
);
1646 rt2x00_set_field32(®
, MM20_PROT_CFG_PROTECT_RATE
, mm20_rate
);
1647 rt2x00_set_field32(®
, MM20_PROT_CFG_PROTECT_CTRL
, mm20_mode
);
1648 rt2800_register_write(rt2x00dev
, MM20_PROT_CFG
, reg
);
1650 rt2800_register_read(rt2x00dev
, MM40_PROT_CFG
, ®
);
1651 rt2x00_set_field32(®
, MM40_PROT_CFG_PROTECT_RATE
, mm40_rate
);
1652 rt2x00_set_field32(®
, MM40_PROT_CFG_PROTECT_CTRL
, mm40_mode
);
1653 rt2800_register_write(rt2x00dev
, MM40_PROT_CFG
, reg
);
1655 rt2800_register_read(rt2x00dev
, GF20_PROT_CFG
, ®
);
1656 rt2x00_set_field32(®
, GF20_PROT_CFG_PROTECT_RATE
, gf20_rate
);
1657 rt2x00_set_field32(®
, GF20_PROT_CFG_PROTECT_CTRL
, gf20_mode
);
1658 rt2800_register_write(rt2x00dev
, GF20_PROT_CFG
, reg
);
1660 rt2800_register_read(rt2x00dev
, GF40_PROT_CFG
, ®
);
1661 rt2x00_set_field32(®
, GF40_PROT_CFG_PROTECT_RATE
, gf40_rate
);
1662 rt2x00_set_field32(®
, GF40_PROT_CFG_PROTECT_CTRL
, gf40_mode
);
1663 rt2800_register_write(rt2x00dev
, GF40_PROT_CFG
, reg
);
1666 void rt2800_config_erp(struct rt2x00_dev
*rt2x00dev
, struct rt2x00lib_erp
*erp
,
1671 if (changed
& BSS_CHANGED_ERP_PREAMBLE
) {
1672 rt2800_register_read(rt2x00dev
, AUTO_RSP_CFG
, ®
);
1673 rt2x00_set_field32(®
, AUTO_RSP_CFG_BAC_ACK_POLICY
,
1674 !!erp
->short_preamble
);
1675 rt2x00_set_field32(®
, AUTO_RSP_CFG_AR_PREAMBLE
,
1676 !!erp
->short_preamble
);
1677 rt2800_register_write(rt2x00dev
, AUTO_RSP_CFG
, reg
);
1680 if (changed
& BSS_CHANGED_ERP_CTS_PROT
) {
1681 rt2800_register_read(rt2x00dev
, OFDM_PROT_CFG
, ®
);
1682 rt2x00_set_field32(®
, OFDM_PROT_CFG_PROTECT_CTRL
,
1683 erp
->cts_protection
? 2 : 0);
1684 rt2800_register_write(rt2x00dev
, OFDM_PROT_CFG
, reg
);
1687 if (changed
& BSS_CHANGED_BASIC_RATES
) {
1688 rt2800_register_write(rt2x00dev
, LEGACY_BASIC_RATE
,
1690 rt2800_register_write(rt2x00dev
, HT_BASIC_RATE
, 0x00008003);
1693 if (changed
& BSS_CHANGED_ERP_SLOT
) {
1694 rt2800_register_read(rt2x00dev
, BKOFF_SLOT_CFG
, ®
);
1695 rt2x00_set_field32(®
, BKOFF_SLOT_CFG_SLOT_TIME
,
1697 rt2800_register_write(rt2x00dev
, BKOFF_SLOT_CFG
, reg
);
1699 rt2800_register_read(rt2x00dev
, XIFS_TIME_CFG
, ®
);
1700 rt2x00_set_field32(®
, XIFS_TIME_CFG_EIFS
, erp
->eifs
);
1701 rt2800_register_write(rt2x00dev
, XIFS_TIME_CFG
, reg
);
1704 if (changed
& BSS_CHANGED_BEACON_INT
) {
1705 rt2800_register_read(rt2x00dev
, BCN_TIME_CFG
, ®
);
1706 rt2x00_set_field32(®
, BCN_TIME_CFG_BEACON_INTERVAL
,
1707 erp
->beacon_int
* 16);
1708 rt2800_register_write(rt2x00dev
, BCN_TIME_CFG
, reg
);
1711 if (changed
& BSS_CHANGED_HT
)
1712 rt2800_config_ht_opmode(rt2x00dev
, erp
);
1714 EXPORT_SYMBOL_GPL(rt2800_config_erp
);
1716 static void rt2800_config_3572bt_ant(struct rt2x00_dev
*rt2x00dev
)
1720 u8 led_ctrl
, led_g_mode
, led_r_mode
;
1722 rt2800_register_read(rt2x00dev
, GPIO_SWITCH
, ®
);
1723 if (rt2x00dev
->curr_band
== IEEE80211_BAND_5GHZ
) {
1724 rt2x00_set_field32(®
, GPIO_SWITCH_0
, 1);
1725 rt2x00_set_field32(®
, GPIO_SWITCH_1
, 1);
1727 rt2x00_set_field32(®
, GPIO_SWITCH_0
, 0);
1728 rt2x00_set_field32(®
, GPIO_SWITCH_1
, 0);
1730 rt2800_register_write(rt2x00dev
, GPIO_SWITCH
, reg
);
1732 rt2800_register_read(rt2x00dev
, LED_CFG
, ®
);
1733 led_g_mode
= rt2x00_get_field32(reg
, LED_CFG_LED_POLAR
) ? 3 : 0;
1734 led_r_mode
= rt2x00_get_field32(reg
, LED_CFG_LED_POLAR
) ? 0 : 3;
1735 if (led_g_mode
!= rt2x00_get_field32(reg
, LED_CFG_G_LED_MODE
) ||
1736 led_r_mode
!= rt2x00_get_field32(reg
, LED_CFG_R_LED_MODE
)) {
1737 rt2800_eeprom_read(rt2x00dev
, EEPROM_FREQ
, &eeprom
);
1738 led_ctrl
= rt2x00_get_field16(eeprom
, EEPROM_FREQ_LED_MODE
);
1739 if (led_ctrl
== 0 || led_ctrl
> 0x40) {
1740 rt2x00_set_field32(®
, LED_CFG_G_LED_MODE
, led_g_mode
);
1741 rt2x00_set_field32(®
, LED_CFG_R_LED_MODE
, led_r_mode
);
1742 rt2800_register_write(rt2x00dev
, LED_CFG
, reg
);
1744 rt2800_mcu_request(rt2x00dev
, MCU_BAND_SELECT
, 0xff,
1745 (led_g_mode
<< 2) | led_r_mode
, 1);
1750 static void rt2800_set_ant_diversity(struct rt2x00_dev
*rt2x00dev
,
1754 u8 eesk_pin
= (ant
== ANTENNA_A
) ? 1 : 0;
1755 u8 gpio_bit3
= (ant
== ANTENNA_A
) ? 0 : 1;
1757 if (rt2x00_is_pci(rt2x00dev
)) {
1758 rt2800_register_read(rt2x00dev
, E2PROM_CSR
, ®
);
1759 rt2x00_set_field32(®
, E2PROM_CSR_DATA_CLOCK
, eesk_pin
);
1760 rt2800_register_write(rt2x00dev
, E2PROM_CSR
, reg
);
1761 } else if (rt2x00_is_usb(rt2x00dev
))
1762 rt2800_mcu_request(rt2x00dev
, MCU_ANT_SELECT
, 0xff,
1765 rt2800_register_read(rt2x00dev
, GPIO_CTRL
, ®
);
1766 rt2x00_set_field32(®
, GPIO_CTRL_DIR3
, 0);
1767 rt2x00_set_field32(®
, GPIO_CTRL_VAL3
, gpio_bit3
);
1768 rt2800_register_write(rt2x00dev
, GPIO_CTRL
, reg
);
1771 void rt2800_config_ant(struct rt2x00_dev
*rt2x00dev
, struct antenna_setup
*ant
)
1777 rt2800_bbp_read(rt2x00dev
, 1, &r1
);
1778 rt2800_bbp_read(rt2x00dev
, 3, &r3
);
1780 if (rt2x00_rt(rt2x00dev
, RT3572
) &&
1781 rt2x00_has_cap_bt_coexist(rt2x00dev
))
1782 rt2800_config_3572bt_ant(rt2x00dev
);
1785 * Configure the TX antenna.
1787 switch (ant
->tx_chain_num
) {
1789 rt2x00_set_field8(&r1
, BBP1_TX_ANTENNA
, 0);
1792 if (rt2x00_rt(rt2x00dev
, RT3572
) &&
1793 rt2x00_has_cap_bt_coexist(rt2x00dev
))
1794 rt2x00_set_field8(&r1
, BBP1_TX_ANTENNA
, 1);
1796 rt2x00_set_field8(&r1
, BBP1_TX_ANTENNA
, 2);
1799 rt2x00_set_field8(&r1
, BBP1_TX_ANTENNA
, 2);
1804 * Configure the RX antenna.
1806 switch (ant
->rx_chain_num
) {
1808 if (rt2x00_rt(rt2x00dev
, RT3070
) ||
1809 rt2x00_rt(rt2x00dev
, RT3090
) ||
1810 rt2x00_rt(rt2x00dev
, RT3352
) ||
1811 rt2x00_rt(rt2x00dev
, RT3390
)) {
1812 rt2800_eeprom_read(rt2x00dev
,
1813 EEPROM_NIC_CONF1
, &eeprom
);
1814 if (rt2x00_get_field16(eeprom
,
1815 EEPROM_NIC_CONF1_ANT_DIVERSITY
))
1816 rt2800_set_ant_diversity(rt2x00dev
,
1817 rt2x00dev
->default_ant
.rx
);
1819 rt2x00_set_field8(&r3
, BBP3_RX_ANTENNA
, 0);
1822 if (rt2x00_rt(rt2x00dev
, RT3572
) &&
1823 rt2x00_has_cap_bt_coexist(rt2x00dev
)) {
1824 rt2x00_set_field8(&r3
, BBP3_RX_ADC
, 1);
1825 rt2x00_set_field8(&r3
, BBP3_RX_ANTENNA
,
1826 rt2x00dev
->curr_band
== IEEE80211_BAND_5GHZ
);
1827 rt2800_set_ant_diversity(rt2x00dev
, ANTENNA_B
);
1829 rt2x00_set_field8(&r3
, BBP3_RX_ANTENNA
, 1);
1833 rt2x00_set_field8(&r3
, BBP3_RX_ANTENNA
, 2);
1837 rt2800_bbp_write(rt2x00dev
, 3, r3
);
1838 rt2800_bbp_write(rt2x00dev
, 1, r1
);
1840 if (rt2x00_rt(rt2x00dev
, RT3593
)) {
1841 if (ant
->rx_chain_num
== 1)
1842 rt2800_bbp_write(rt2x00dev
, 86, 0x00);
1844 rt2800_bbp_write(rt2x00dev
, 86, 0x46);
1847 EXPORT_SYMBOL_GPL(rt2800_config_ant
);
1849 static void rt2800_config_lna_gain(struct rt2x00_dev
*rt2x00dev
,
1850 struct rt2x00lib_conf
*libconf
)
1855 if (libconf
->rf
.channel
<= 14) {
1856 rt2800_eeprom_read(rt2x00dev
, EEPROM_LNA
, &eeprom
);
1857 lna_gain
= rt2x00_get_field16(eeprom
, EEPROM_LNA_BG
);
1858 } else if (libconf
->rf
.channel
<= 64) {
1859 rt2800_eeprom_read(rt2x00dev
, EEPROM_LNA
, &eeprom
);
1860 lna_gain
= rt2x00_get_field16(eeprom
, EEPROM_LNA_A0
);
1861 } else if (libconf
->rf
.channel
<= 128) {
1862 if (rt2x00_rt(rt2x00dev
, RT3593
)) {
1863 rt2800_eeprom_read(rt2x00dev
, EEPROM_EXT_LNA2
, &eeprom
);
1864 lna_gain
= rt2x00_get_field16(eeprom
,
1865 EEPROM_EXT_LNA2_A1
);
1867 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_BG2
, &eeprom
);
1868 lna_gain
= rt2x00_get_field16(eeprom
,
1869 EEPROM_RSSI_BG2_LNA_A1
);
1872 if (rt2x00_rt(rt2x00dev
, RT3593
)) {
1873 rt2800_eeprom_read(rt2x00dev
, EEPROM_EXT_LNA2
, &eeprom
);
1874 lna_gain
= rt2x00_get_field16(eeprom
,
1875 EEPROM_EXT_LNA2_A2
);
1877 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_A2
, &eeprom
);
1878 lna_gain
= rt2x00_get_field16(eeprom
,
1879 EEPROM_RSSI_A2_LNA_A2
);
1883 rt2x00dev
->lna_gain
= lna_gain
;
1886 #define FREQ_OFFSET_BOUND 0x5f
1888 static void rt2800_adjust_freq_offset(struct rt2x00_dev
*rt2x00dev
)
1890 u8 freq_offset
, prev_freq_offset
;
1891 u8 rfcsr
, prev_rfcsr
;
1893 freq_offset
= rt2x00_get_field8(rt2x00dev
->freq_offset
, RFCSR17_CODE
);
1894 freq_offset
= min_t(u8
, freq_offset
, FREQ_OFFSET_BOUND
);
1896 rt2800_rfcsr_read(rt2x00dev
, 17, &rfcsr
);
1899 rt2x00_set_field8(&rfcsr
, RFCSR17_CODE
, freq_offset
);
1900 if (rfcsr
== prev_rfcsr
)
1903 if (rt2x00_is_usb(rt2x00dev
)) {
1904 rt2800_mcu_request(rt2x00dev
, MCU_FREQ_OFFSET
, 0xff,
1905 freq_offset
, prev_rfcsr
);
1909 prev_freq_offset
= rt2x00_get_field8(prev_rfcsr
, RFCSR17_CODE
);
1910 while (prev_freq_offset
!= freq_offset
) {
1911 if (prev_freq_offset
< freq_offset
)
1916 rt2x00_set_field8(&rfcsr
, RFCSR17_CODE
, prev_freq_offset
);
1917 rt2800_rfcsr_write(rt2x00dev
, 17, rfcsr
);
1919 usleep_range(1000, 1500);
1923 static void rt2800_config_channel_rf2xxx(struct rt2x00_dev
*rt2x00dev
,
1924 struct ieee80211_conf
*conf
,
1925 struct rf_channel
*rf
,
1926 struct channel_info
*info
)
1928 rt2x00_set_field32(&rf
->rf4
, RF4_FREQ_OFFSET
, rt2x00dev
->freq_offset
);
1930 if (rt2x00dev
->default_ant
.tx_chain_num
== 1)
1931 rt2x00_set_field32(&rf
->rf2
, RF2_ANTENNA_TX1
, 1);
1933 if (rt2x00dev
->default_ant
.rx_chain_num
== 1) {
1934 rt2x00_set_field32(&rf
->rf2
, RF2_ANTENNA_RX1
, 1);
1935 rt2x00_set_field32(&rf
->rf2
, RF2_ANTENNA_RX2
, 1);
1936 } else if (rt2x00dev
->default_ant
.rx_chain_num
== 2)
1937 rt2x00_set_field32(&rf
->rf2
, RF2_ANTENNA_RX2
, 1);
1939 if (rf
->channel
> 14) {
1941 * When TX power is below 0, we should increase it by 7 to
1942 * make it a positive value (Minimum value is -7).
1943 * However this means that values between 0 and 7 have
1944 * double meaning, and we should set a 7DBm boost flag.
1946 rt2x00_set_field32(&rf
->rf3
, RF3_TXPOWER_A_7DBM_BOOST
,
1947 (info
->default_power1
>= 0));
1949 if (info
->default_power1
< 0)
1950 info
->default_power1
+= 7;
1952 rt2x00_set_field32(&rf
->rf3
, RF3_TXPOWER_A
, info
->default_power1
);
1954 rt2x00_set_field32(&rf
->rf4
, RF4_TXPOWER_A_7DBM_BOOST
,
1955 (info
->default_power2
>= 0));
1957 if (info
->default_power2
< 0)
1958 info
->default_power2
+= 7;
1960 rt2x00_set_field32(&rf
->rf4
, RF4_TXPOWER_A
, info
->default_power2
);
1962 rt2x00_set_field32(&rf
->rf3
, RF3_TXPOWER_G
, info
->default_power1
);
1963 rt2x00_set_field32(&rf
->rf4
, RF4_TXPOWER_G
, info
->default_power2
);
1966 rt2x00_set_field32(&rf
->rf4
, RF4_HT40
, conf_is_ht40(conf
));
1968 rt2800_rf_write(rt2x00dev
, 1, rf
->rf1
);
1969 rt2800_rf_write(rt2x00dev
, 2, rf
->rf2
);
1970 rt2800_rf_write(rt2x00dev
, 3, rf
->rf3
& ~0x00000004);
1971 rt2800_rf_write(rt2x00dev
, 4, rf
->rf4
);
1975 rt2800_rf_write(rt2x00dev
, 1, rf
->rf1
);
1976 rt2800_rf_write(rt2x00dev
, 2, rf
->rf2
);
1977 rt2800_rf_write(rt2x00dev
, 3, rf
->rf3
| 0x00000004);
1978 rt2800_rf_write(rt2x00dev
, 4, rf
->rf4
);
1982 rt2800_rf_write(rt2x00dev
, 1, rf
->rf1
);
1983 rt2800_rf_write(rt2x00dev
, 2, rf
->rf2
);
1984 rt2800_rf_write(rt2x00dev
, 3, rf
->rf3
& ~0x00000004);
1985 rt2800_rf_write(rt2x00dev
, 4, rf
->rf4
);
1988 static void rt2800_config_channel_rf3xxx(struct rt2x00_dev
*rt2x00dev
,
1989 struct ieee80211_conf
*conf
,
1990 struct rf_channel
*rf
,
1991 struct channel_info
*info
)
1993 struct rt2800_drv_data
*drv_data
= rt2x00dev
->drv_data
;
1994 u8 rfcsr
, calib_tx
, calib_rx
;
1996 rt2800_rfcsr_write(rt2x00dev
, 2, rf
->rf1
);
1998 rt2800_rfcsr_read(rt2x00dev
, 3, &rfcsr
);
1999 rt2x00_set_field8(&rfcsr
, RFCSR3_K
, rf
->rf3
);
2000 rt2800_rfcsr_write(rt2x00dev
, 3, rfcsr
);
2002 rt2800_rfcsr_read(rt2x00dev
, 6, &rfcsr
);
2003 rt2x00_set_field8(&rfcsr
, RFCSR6_R1
, rf
->rf2
);
2004 rt2800_rfcsr_write(rt2x00dev
, 6, rfcsr
);
2006 rt2800_rfcsr_read(rt2x00dev
, 12, &rfcsr
);
2007 rt2x00_set_field8(&rfcsr
, RFCSR12_TX_POWER
, info
->default_power1
);
2008 rt2800_rfcsr_write(rt2x00dev
, 12, rfcsr
);
2010 rt2800_rfcsr_read(rt2x00dev
, 13, &rfcsr
);
2011 rt2x00_set_field8(&rfcsr
, RFCSR13_TX_POWER
, info
->default_power2
);
2012 rt2800_rfcsr_write(rt2x00dev
, 13, rfcsr
);
2014 rt2800_rfcsr_read(rt2x00dev
, 1, &rfcsr
);
2015 rt2x00_set_field8(&rfcsr
, RFCSR1_RX0_PD
, 0);
2016 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
,
2017 rt2x00dev
->default_ant
.rx_chain_num
<= 1);
2018 rt2x00_set_field8(&rfcsr
, RFCSR1_RX2_PD
,
2019 rt2x00dev
->default_ant
.rx_chain_num
<= 2);
2020 rt2x00_set_field8(&rfcsr
, RFCSR1_TX0_PD
, 0);
2021 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
,
2022 rt2x00dev
->default_ant
.tx_chain_num
<= 1);
2023 rt2x00_set_field8(&rfcsr
, RFCSR1_TX2_PD
,
2024 rt2x00dev
->default_ant
.tx_chain_num
<= 2);
2025 rt2800_rfcsr_write(rt2x00dev
, 1, rfcsr
);
2027 rt2800_rfcsr_read(rt2x00dev
, 23, &rfcsr
);
2028 rt2x00_set_field8(&rfcsr
, RFCSR23_FREQ_OFFSET
, rt2x00dev
->freq_offset
);
2029 rt2800_rfcsr_write(rt2x00dev
, 23, rfcsr
);
2031 if (rt2x00_rt(rt2x00dev
, RT3390
)) {
2032 calib_tx
= conf_is_ht40(conf
) ? 0x68 : 0x4f;
2033 calib_rx
= conf_is_ht40(conf
) ? 0x6f : 0x4f;
2035 if (conf_is_ht40(conf
)) {
2036 calib_tx
= drv_data
->calibration_bw40
;
2037 calib_rx
= drv_data
->calibration_bw40
;
2039 calib_tx
= drv_data
->calibration_bw20
;
2040 calib_rx
= drv_data
->calibration_bw20
;
2044 rt2800_rfcsr_read(rt2x00dev
, 24, &rfcsr
);
2045 rt2x00_set_field8(&rfcsr
, RFCSR24_TX_CALIB
, calib_tx
);
2046 rt2800_rfcsr_write(rt2x00dev
, 24, rfcsr
);
2048 rt2800_rfcsr_read(rt2x00dev
, 31, &rfcsr
);
2049 rt2x00_set_field8(&rfcsr
, RFCSR31_RX_CALIB
, calib_rx
);
2050 rt2800_rfcsr_write(rt2x00dev
, 31, rfcsr
);
2052 rt2800_rfcsr_read(rt2x00dev
, 7, &rfcsr
);
2053 rt2x00_set_field8(&rfcsr
, RFCSR7_RF_TUNING
, 1);
2054 rt2800_rfcsr_write(rt2x00dev
, 7, rfcsr
);
2056 rt2800_rfcsr_read(rt2x00dev
, 30, &rfcsr
);
2057 rt2x00_set_field8(&rfcsr
, RFCSR30_RF_CALIBRATION
, 1);
2058 rt2800_rfcsr_write(rt2x00dev
, 30, rfcsr
);
2060 rt2x00_set_field8(&rfcsr
, RFCSR30_RF_CALIBRATION
, 0);
2061 rt2800_rfcsr_write(rt2x00dev
, 30, rfcsr
);
2064 static void rt2800_config_channel_rf3052(struct rt2x00_dev
*rt2x00dev
,
2065 struct ieee80211_conf
*conf
,
2066 struct rf_channel
*rf
,
2067 struct channel_info
*info
)
2069 struct rt2800_drv_data
*drv_data
= rt2x00dev
->drv_data
;
2073 if (rf
->channel
<= 14) {
2074 rt2800_bbp_write(rt2x00dev
, 25, drv_data
->bbp25
);
2075 rt2800_bbp_write(rt2x00dev
, 26, drv_data
->bbp26
);
2077 rt2800_bbp_write(rt2x00dev
, 25, 0x09);
2078 rt2800_bbp_write(rt2x00dev
, 26, 0xff);
2081 rt2800_rfcsr_write(rt2x00dev
, 2, rf
->rf1
);
2082 rt2800_rfcsr_write(rt2x00dev
, 3, rf
->rf3
);
2084 rt2800_rfcsr_read(rt2x00dev
, 6, &rfcsr
);
2085 rt2x00_set_field8(&rfcsr
, RFCSR6_R1
, rf
->rf2
);
2086 if (rf
->channel
<= 14)
2087 rt2x00_set_field8(&rfcsr
, RFCSR6_TXDIV
, 2);
2089 rt2x00_set_field8(&rfcsr
, RFCSR6_TXDIV
, 1);
2090 rt2800_rfcsr_write(rt2x00dev
, 6, rfcsr
);
2092 rt2800_rfcsr_read(rt2x00dev
, 5, &rfcsr
);
2093 if (rf
->channel
<= 14)
2094 rt2x00_set_field8(&rfcsr
, RFCSR5_R1
, 1);
2096 rt2x00_set_field8(&rfcsr
, RFCSR5_R1
, 2);
2097 rt2800_rfcsr_write(rt2x00dev
, 5, rfcsr
);
2099 rt2800_rfcsr_read(rt2x00dev
, 12, &rfcsr
);
2100 if (rf
->channel
<= 14) {
2101 rt2x00_set_field8(&rfcsr
, RFCSR12_DR0
, 3);
2102 rt2x00_set_field8(&rfcsr
, RFCSR12_TX_POWER
,
2103 info
->default_power1
);
2105 rt2x00_set_field8(&rfcsr
, RFCSR12_DR0
, 7);
2106 rt2x00_set_field8(&rfcsr
, RFCSR12_TX_POWER
,
2107 (info
->default_power1
& 0x3) |
2108 ((info
->default_power1
& 0xC) << 1));
2110 rt2800_rfcsr_write(rt2x00dev
, 12, rfcsr
);
2112 rt2800_rfcsr_read(rt2x00dev
, 13, &rfcsr
);
2113 if (rf
->channel
<= 14) {
2114 rt2x00_set_field8(&rfcsr
, RFCSR13_DR0
, 3);
2115 rt2x00_set_field8(&rfcsr
, RFCSR13_TX_POWER
,
2116 info
->default_power2
);
2118 rt2x00_set_field8(&rfcsr
, RFCSR13_DR0
, 7);
2119 rt2x00_set_field8(&rfcsr
, RFCSR13_TX_POWER
,
2120 (info
->default_power2
& 0x3) |
2121 ((info
->default_power2
& 0xC) << 1));
2123 rt2800_rfcsr_write(rt2x00dev
, 13, rfcsr
);
2125 rt2800_rfcsr_read(rt2x00dev
, 1, &rfcsr
);
2126 rt2x00_set_field8(&rfcsr
, RFCSR1_RX0_PD
, 0);
2127 rt2x00_set_field8(&rfcsr
, RFCSR1_TX0_PD
, 0);
2128 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
, 0);
2129 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
, 0);
2130 rt2x00_set_field8(&rfcsr
, RFCSR1_RX2_PD
, 0);
2131 rt2x00_set_field8(&rfcsr
, RFCSR1_TX2_PD
, 0);
2132 if (rt2x00_has_cap_bt_coexist(rt2x00dev
)) {
2133 if (rf
->channel
<= 14) {
2134 rt2x00_set_field8(&rfcsr
, RFCSR1_RX0_PD
, 1);
2135 rt2x00_set_field8(&rfcsr
, RFCSR1_TX0_PD
, 1);
2137 rt2x00_set_field8(&rfcsr
, RFCSR1_RX2_PD
, 1);
2138 rt2x00_set_field8(&rfcsr
, RFCSR1_TX2_PD
, 1);
2140 switch (rt2x00dev
->default_ant
.tx_chain_num
) {
2142 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
, 1);
2144 rt2x00_set_field8(&rfcsr
, RFCSR1_TX2_PD
, 1);
2148 switch (rt2x00dev
->default_ant
.rx_chain_num
) {
2150 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
, 1);
2152 rt2x00_set_field8(&rfcsr
, RFCSR1_RX2_PD
, 1);
2156 rt2800_rfcsr_write(rt2x00dev
, 1, rfcsr
);
2158 rt2800_rfcsr_read(rt2x00dev
, 23, &rfcsr
);
2159 rt2x00_set_field8(&rfcsr
, RFCSR23_FREQ_OFFSET
, rt2x00dev
->freq_offset
);
2160 rt2800_rfcsr_write(rt2x00dev
, 23, rfcsr
);
2162 if (conf_is_ht40(conf
)) {
2163 rt2800_rfcsr_write(rt2x00dev
, 24, drv_data
->calibration_bw40
);
2164 rt2800_rfcsr_write(rt2x00dev
, 31, drv_data
->calibration_bw40
);
2166 rt2800_rfcsr_write(rt2x00dev
, 24, drv_data
->calibration_bw20
);
2167 rt2800_rfcsr_write(rt2x00dev
, 31, drv_data
->calibration_bw20
);
2170 if (rf
->channel
<= 14) {
2171 rt2800_rfcsr_write(rt2x00dev
, 7, 0xd8);
2172 rt2800_rfcsr_write(rt2x00dev
, 9, 0xc3);
2173 rt2800_rfcsr_write(rt2x00dev
, 10, 0xf1);
2174 rt2800_rfcsr_write(rt2x00dev
, 11, 0xb9);
2175 rt2800_rfcsr_write(rt2x00dev
, 15, 0x53);
2177 rt2x00_set_field8(&rfcsr
, RFCSR16_TXMIXER_GAIN
,
2178 drv_data
->txmixer_gain_24g
);
2179 rt2800_rfcsr_write(rt2x00dev
, 16, rfcsr
);
2180 rt2800_rfcsr_write(rt2x00dev
, 17, 0x23);
2181 rt2800_rfcsr_write(rt2x00dev
, 19, 0x93);
2182 rt2800_rfcsr_write(rt2x00dev
, 20, 0xb3);
2183 rt2800_rfcsr_write(rt2x00dev
, 25, 0x15);
2184 rt2800_rfcsr_write(rt2x00dev
, 26, 0x85);
2185 rt2800_rfcsr_write(rt2x00dev
, 27, 0x00);
2186 rt2800_rfcsr_write(rt2x00dev
, 29, 0x9b);
2188 rt2800_rfcsr_read(rt2x00dev
, 7, &rfcsr
);
2189 rt2x00_set_field8(&rfcsr
, RFCSR7_BIT2
, 1);
2190 rt2x00_set_field8(&rfcsr
, RFCSR7_BIT3
, 0);
2191 rt2x00_set_field8(&rfcsr
, RFCSR7_BIT4
, 1);
2192 rt2x00_set_field8(&rfcsr
, RFCSR7_BITS67
, 0);
2193 rt2800_rfcsr_write(rt2x00dev
, 7, rfcsr
);
2194 rt2800_rfcsr_write(rt2x00dev
, 9, 0xc0);
2195 rt2800_rfcsr_write(rt2x00dev
, 10, 0xf1);
2196 rt2800_rfcsr_write(rt2x00dev
, 11, 0x00);
2197 rt2800_rfcsr_write(rt2x00dev
, 15, 0x43);
2199 rt2x00_set_field8(&rfcsr
, RFCSR16_TXMIXER_GAIN
,
2200 drv_data
->txmixer_gain_5g
);
2201 rt2800_rfcsr_write(rt2x00dev
, 16, rfcsr
);
2202 rt2800_rfcsr_write(rt2x00dev
, 17, 0x23);
2203 if (rf
->channel
<= 64) {
2204 rt2800_rfcsr_write(rt2x00dev
, 19, 0xb7);
2205 rt2800_rfcsr_write(rt2x00dev
, 20, 0xf6);
2206 rt2800_rfcsr_write(rt2x00dev
, 25, 0x3d);
2207 } else if (rf
->channel
<= 128) {
2208 rt2800_rfcsr_write(rt2x00dev
, 19, 0x74);
2209 rt2800_rfcsr_write(rt2x00dev
, 20, 0xf4);
2210 rt2800_rfcsr_write(rt2x00dev
, 25, 0x01);
2212 rt2800_rfcsr_write(rt2x00dev
, 19, 0x72);
2213 rt2800_rfcsr_write(rt2x00dev
, 20, 0xf3);
2214 rt2800_rfcsr_write(rt2x00dev
, 25, 0x01);
2216 rt2800_rfcsr_write(rt2x00dev
, 26, 0x87);
2217 rt2800_rfcsr_write(rt2x00dev
, 27, 0x01);
2218 rt2800_rfcsr_write(rt2x00dev
, 29, 0x9f);
2221 rt2800_register_read(rt2x00dev
, GPIO_CTRL
, ®
);
2222 rt2x00_set_field32(®
, GPIO_CTRL_DIR7
, 0);
2223 if (rf
->channel
<= 14)
2224 rt2x00_set_field32(®
, GPIO_CTRL_VAL7
, 1);
2226 rt2x00_set_field32(®
, GPIO_CTRL_VAL7
, 0);
2227 rt2800_register_write(rt2x00dev
, GPIO_CTRL
, reg
);
2229 rt2800_rfcsr_read(rt2x00dev
, 7, &rfcsr
);
2230 rt2x00_set_field8(&rfcsr
, RFCSR7_RF_TUNING
, 1);
2231 rt2800_rfcsr_write(rt2x00dev
, 7, rfcsr
);
2234 static void rt2800_config_channel_rf3053(struct rt2x00_dev
*rt2x00dev
,
2235 struct ieee80211_conf
*conf
,
2236 struct rf_channel
*rf
,
2237 struct channel_info
*info
)
2239 struct rt2800_drv_data
*drv_data
= rt2x00dev
->drv_data
;
2244 const bool txbf_enabled
= false; /* TODO */
2246 /* TODO: use TX{0,1,2}FinePowerControl values from EEPROM */
2247 rt2800_bbp_read(rt2x00dev
, 109, &bbp
);
2248 rt2x00_set_field8(&bbp
, BBP109_TX0_POWER
, 0);
2249 rt2x00_set_field8(&bbp
, BBP109_TX1_POWER
, 0);
2250 rt2800_bbp_write(rt2x00dev
, 109, bbp
);
2252 rt2800_bbp_read(rt2x00dev
, 110, &bbp
);
2253 rt2x00_set_field8(&bbp
, BBP110_TX2_POWER
, 0);
2254 rt2800_bbp_write(rt2x00dev
, 110, bbp
);
2256 if (rf
->channel
<= 14) {
2257 /* Restore BBP 25 & 26 for 2.4 GHz */
2258 rt2800_bbp_write(rt2x00dev
, 25, drv_data
->bbp25
);
2259 rt2800_bbp_write(rt2x00dev
, 26, drv_data
->bbp26
);
2261 /* Hard code BBP 25 & 26 for 5GHz */
2263 /* Enable IQ Phase correction */
2264 rt2800_bbp_write(rt2x00dev
, 25, 0x09);
2265 /* Setup IQ Phase correction value */
2266 rt2800_bbp_write(rt2x00dev
, 26, 0xff);
2269 rt2800_rfcsr_write(rt2x00dev
, 8, rf
->rf1
);
2270 rt2800_rfcsr_write(rt2x00dev
, 9, rf
->rf3
& 0xf);
2272 rt2800_rfcsr_read(rt2x00dev
, 11, &rfcsr
);
2273 rt2x00_set_field8(&rfcsr
, RFCSR11_R
, (rf
->rf2
& 0x3));
2274 rt2800_rfcsr_write(rt2x00dev
, 11, rfcsr
);
2276 rt2800_rfcsr_read(rt2x00dev
, 11, &rfcsr
);
2277 rt2x00_set_field8(&rfcsr
, RFCSR11_PLL_IDOH
, 1);
2278 if (rf
->channel
<= 14)
2279 rt2x00_set_field8(&rfcsr
, RFCSR11_PLL_MOD
, 1);
2281 rt2x00_set_field8(&rfcsr
, RFCSR11_PLL_MOD
, 2);
2282 rt2800_rfcsr_write(rt2x00dev
, 11, rfcsr
);
2284 rt2800_rfcsr_read(rt2x00dev
, 53, &rfcsr
);
2285 if (rf
->channel
<= 14) {
2287 rt2x00_set_field8(&rfcsr
, RFCSR53_TX_POWER
,
2288 info
->default_power1
& 0x1f);
2290 if (rt2x00_is_usb(rt2x00dev
))
2293 rt2x00_set_field8(&rfcsr
, RFCSR53_TX_POWER
,
2294 ((info
->default_power1
& 0x18) << 1) |
2295 (info
->default_power1
& 7));
2297 rt2800_rfcsr_write(rt2x00dev
, 53, rfcsr
);
2299 rt2800_rfcsr_read(rt2x00dev
, 55, &rfcsr
);
2300 if (rf
->channel
<= 14) {
2302 rt2x00_set_field8(&rfcsr
, RFCSR55_TX_POWER
,
2303 info
->default_power2
& 0x1f);
2305 if (rt2x00_is_usb(rt2x00dev
))
2308 rt2x00_set_field8(&rfcsr
, RFCSR55_TX_POWER
,
2309 ((info
->default_power2
& 0x18) << 1) |
2310 (info
->default_power2
& 7));
2312 rt2800_rfcsr_write(rt2x00dev
, 55, rfcsr
);
2314 rt2800_rfcsr_read(rt2x00dev
, 54, &rfcsr
);
2315 if (rf
->channel
<= 14) {
2317 rt2x00_set_field8(&rfcsr
, RFCSR54_TX_POWER
,
2318 info
->default_power3
& 0x1f);
2320 if (rt2x00_is_usb(rt2x00dev
))
2323 rt2x00_set_field8(&rfcsr
, RFCSR54_TX_POWER
,
2324 ((info
->default_power3
& 0x18) << 1) |
2325 (info
->default_power3
& 7));
2327 rt2800_rfcsr_write(rt2x00dev
, 54, rfcsr
);
2329 rt2800_rfcsr_read(rt2x00dev
, 1, &rfcsr
);
2330 rt2x00_set_field8(&rfcsr
, RFCSR1_RX0_PD
, 0);
2331 rt2x00_set_field8(&rfcsr
, RFCSR1_TX0_PD
, 0);
2332 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
, 0);
2333 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
, 0);
2334 rt2x00_set_field8(&rfcsr
, RFCSR1_RX2_PD
, 0);
2335 rt2x00_set_field8(&rfcsr
, RFCSR1_TX2_PD
, 0);
2336 rt2x00_set_field8(&rfcsr
, RFCSR1_RF_BLOCK_EN
, 1);
2337 rt2x00_set_field8(&rfcsr
, RFCSR1_PLL_PD
, 1);
2339 switch (rt2x00dev
->default_ant
.tx_chain_num
) {
2341 rt2x00_set_field8(&rfcsr
, RFCSR1_TX2_PD
, 1);
2344 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
, 1);
2347 rt2x00_set_field8(&rfcsr
, RFCSR1_TX0_PD
, 1);
2351 switch (rt2x00dev
->default_ant
.rx_chain_num
) {
2353 rt2x00_set_field8(&rfcsr
, RFCSR1_RX2_PD
, 1);
2356 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
, 1);
2359 rt2x00_set_field8(&rfcsr
, RFCSR1_RX0_PD
, 1);
2362 rt2800_rfcsr_write(rt2x00dev
, 1, rfcsr
);
2364 rt2800_adjust_freq_offset(rt2x00dev
);
2366 if (conf_is_ht40(conf
)) {
2367 txrx_agc_fc
= rt2x00_get_field8(drv_data
->calibration_bw40
,
2369 txrx_h20m
= rt2x00_get_field8(drv_data
->calibration_bw40
,
2372 txrx_agc_fc
= rt2x00_get_field8(drv_data
->calibration_bw20
,
2374 txrx_h20m
= rt2x00_get_field8(drv_data
->calibration_bw20
,
2378 /* NOTE: the reference driver does not writes the new value
2381 rt2800_rfcsr_read(rt2x00dev
, 32, &rfcsr
);
2382 rt2x00_set_field8(&rfcsr
, RFCSR32_TX_AGC_FC
, txrx_agc_fc
);
2384 if (rf
->channel
<= 14)
2388 rt2800_rfcsr_write(rt2x00dev
, 31, rfcsr
);
2390 rt2800_rfcsr_read(rt2x00dev
, 30, &rfcsr
);
2391 rt2x00_set_field8(&rfcsr
, RFCSR30_TX_H20M
, txrx_h20m
);
2392 rt2x00_set_field8(&rfcsr
, RFCSR30_RX_H20M
, txrx_h20m
);
2393 rt2800_rfcsr_write(rt2x00dev
, 30, rfcsr
);
2395 /* Band selection */
2396 rt2800_rfcsr_read(rt2x00dev
, 36, &rfcsr
);
2397 if (rf
->channel
<= 14)
2398 rt2x00_set_field8(&rfcsr
, RFCSR36_RF_BS
, 1);
2400 rt2x00_set_field8(&rfcsr
, RFCSR36_RF_BS
, 0);
2401 rt2800_rfcsr_write(rt2x00dev
, 36, rfcsr
);
2403 rt2800_rfcsr_read(rt2x00dev
, 34, &rfcsr
);
2404 if (rf
->channel
<= 14)
2408 rt2800_rfcsr_write(rt2x00dev
, 34, rfcsr
);
2410 rt2800_rfcsr_read(rt2x00dev
, 12, &rfcsr
);
2411 if (rf
->channel
<= 14)
2415 rt2800_rfcsr_write(rt2x00dev
, 12, rfcsr
);
2417 rt2800_rfcsr_read(rt2x00dev
, 6, &rfcsr
);
2418 if (rf
->channel
>= 1 && rf
->channel
<= 14)
2419 rt2x00_set_field8(&rfcsr
, RFCSR6_VCO_IC
, 1);
2420 else if (rf
->channel
>= 36 && rf
->channel
<= 64)
2421 rt2x00_set_field8(&rfcsr
, RFCSR6_VCO_IC
, 2);
2422 else if (rf
->channel
>= 100 && rf
->channel
<= 128)
2423 rt2x00_set_field8(&rfcsr
, RFCSR6_VCO_IC
, 2);
2425 rt2x00_set_field8(&rfcsr
, RFCSR6_VCO_IC
, 1);
2426 rt2800_rfcsr_write(rt2x00dev
, 6, rfcsr
);
2428 rt2800_rfcsr_read(rt2x00dev
, 30, &rfcsr
);
2429 rt2x00_set_field8(&rfcsr
, RFCSR30_RX_VCM
, 2);
2430 rt2800_rfcsr_write(rt2x00dev
, 30, rfcsr
);
2432 rt2800_rfcsr_write(rt2x00dev
, 46, 0x60);
2434 if (rf
->channel
<= 14) {
2435 rt2800_rfcsr_write(rt2x00dev
, 10, 0xd3);
2436 rt2800_rfcsr_write(rt2x00dev
, 13, 0x12);
2438 rt2800_rfcsr_write(rt2x00dev
, 10, 0xd8);
2439 rt2800_rfcsr_write(rt2x00dev
, 13, 0x23);
2442 rt2800_rfcsr_read(rt2x00dev
, 51, &rfcsr
);
2443 rt2x00_set_field8(&rfcsr
, RFCSR51_BITS01
, 1);
2444 rt2800_rfcsr_write(rt2x00dev
, 51, rfcsr
);
2446 rt2800_rfcsr_read(rt2x00dev
, 51, &rfcsr
);
2447 if (rf
->channel
<= 14) {
2448 rt2x00_set_field8(&rfcsr
, RFCSR51_BITS24
, 5);
2449 rt2x00_set_field8(&rfcsr
, RFCSR51_BITS57
, 3);
2451 rt2x00_set_field8(&rfcsr
, RFCSR51_BITS24
, 4);
2452 rt2x00_set_field8(&rfcsr
, RFCSR51_BITS57
, 2);
2454 rt2800_rfcsr_write(rt2x00dev
, 51, rfcsr
);
2456 rt2800_rfcsr_read(rt2x00dev
, 49, &rfcsr
);
2457 if (rf
->channel
<= 14)
2458 rt2x00_set_field8(&rfcsr
, RFCSR49_TX_LO1_IC
, 3);
2460 rt2x00_set_field8(&rfcsr
, RFCSR49_TX_LO1_IC
, 2);
2463 rt2x00_set_field8(&rfcsr
, RFCSR49_TX_DIV
, 1);
2465 rt2800_rfcsr_write(rt2x00dev
, 49, rfcsr
);
2467 rt2800_rfcsr_read(rt2x00dev
, 50, &rfcsr
);
2468 rt2x00_set_field8(&rfcsr
, RFCSR50_TX_LO1_EN
, 0);
2469 rt2800_rfcsr_write(rt2x00dev
, 50, rfcsr
);
2471 rt2800_rfcsr_read(rt2x00dev
, 57, &rfcsr
);
2472 if (rf
->channel
<= 14)
2473 rt2x00_set_field8(&rfcsr
, RFCSR57_DRV_CC
, 0x1b);
2475 rt2x00_set_field8(&rfcsr
, RFCSR57_DRV_CC
, 0x0f);
2476 rt2800_rfcsr_write(rt2x00dev
, 57, rfcsr
);
2478 if (rf
->channel
<= 14) {
2479 rt2800_rfcsr_write(rt2x00dev
, 44, 0x93);
2480 rt2800_rfcsr_write(rt2x00dev
, 52, 0x45);
2482 rt2800_rfcsr_write(rt2x00dev
, 44, 0x9b);
2483 rt2800_rfcsr_write(rt2x00dev
, 52, 0x05);
2486 /* Initiate VCO calibration */
2487 rt2800_rfcsr_read(rt2x00dev
, 3, &rfcsr
);
2488 if (rf
->channel
<= 14) {
2489 rt2x00_set_field8(&rfcsr
, RFCSR3_VCOCAL_EN
, 1);
2491 rt2x00_set_field8(&rfcsr
, RFCSR3_BIT1
, 1);
2492 rt2x00_set_field8(&rfcsr
, RFCSR3_BIT2
, 1);
2493 rt2x00_set_field8(&rfcsr
, RFCSR3_BIT3
, 1);
2494 rt2x00_set_field8(&rfcsr
, RFCSR3_BIT4
, 1);
2495 rt2x00_set_field8(&rfcsr
, RFCSR3_BIT5
, 1);
2496 rt2x00_set_field8(&rfcsr
, RFCSR3_VCOCAL_EN
, 1);
2498 rt2800_rfcsr_write(rt2x00dev
, 3, rfcsr
);
2500 if (rf
->channel
>= 1 && rf
->channel
<= 14) {
2503 rt2x00_set_field8(&rfcsr
, RFCSR39_RX_DIV
, 1);
2504 rt2800_rfcsr_write(rt2x00dev
, 39, rfcsr
);
2506 rt2800_rfcsr_write(rt2x00dev
, 45, 0xbb);
2507 } else if (rf
->channel
>= 36 && rf
->channel
<= 64) {
2510 rt2x00_set_field8(&rfcsr
, RFCSR39_RX_DIV
, 1);
2511 rt2800_rfcsr_write(rt2x00dev
, 39, 0x36);
2513 rt2800_rfcsr_write(rt2x00dev
, 45, 0xeb);
2514 } else if (rf
->channel
>= 100 && rf
->channel
<= 128) {
2517 rt2x00_set_field8(&rfcsr
, RFCSR39_RX_DIV
, 1);
2518 rt2800_rfcsr_write(rt2x00dev
, 39, rfcsr
);
2520 rt2800_rfcsr_write(rt2x00dev
, 45, 0xb3);
2524 rt2x00_set_field8(&rfcsr
, RFCSR39_RX_DIV
, 1);
2525 rt2800_rfcsr_write(rt2x00dev
, 39, rfcsr
);
2527 rt2800_rfcsr_write(rt2x00dev
, 45, 0x9b);
2531 #define POWER_BOUND 0x27
2532 #define POWER_BOUND_5G 0x2b
2534 static void rt2800_config_channel_rf3290(struct rt2x00_dev
*rt2x00dev
,
2535 struct ieee80211_conf
*conf
,
2536 struct rf_channel
*rf
,
2537 struct channel_info
*info
)
2541 rt2800_rfcsr_write(rt2x00dev
, 8, rf
->rf1
);
2542 rt2800_rfcsr_write(rt2x00dev
, 9, rf
->rf3
);
2543 rt2800_rfcsr_read(rt2x00dev
, 11, &rfcsr
);
2544 rt2x00_set_field8(&rfcsr
, RFCSR11_R
, rf
->rf2
);
2545 rt2800_rfcsr_write(rt2x00dev
, 11, rfcsr
);
2547 rt2800_rfcsr_read(rt2x00dev
, 49, &rfcsr
);
2548 if (info
->default_power1
> POWER_BOUND
)
2549 rt2x00_set_field8(&rfcsr
, RFCSR49_TX
, POWER_BOUND
);
2551 rt2x00_set_field8(&rfcsr
, RFCSR49_TX
, info
->default_power1
);
2552 rt2800_rfcsr_write(rt2x00dev
, 49, rfcsr
);
2554 rt2800_adjust_freq_offset(rt2x00dev
);
2556 if (rf
->channel
<= 14) {
2557 if (rf
->channel
== 6)
2558 rt2800_bbp_write(rt2x00dev
, 68, 0x0c);
2560 rt2800_bbp_write(rt2x00dev
, 68, 0x0b);
2562 if (rf
->channel
>= 1 && rf
->channel
<= 6)
2563 rt2800_bbp_write(rt2x00dev
, 59, 0x0f);
2564 else if (rf
->channel
>= 7 && rf
->channel
<= 11)
2565 rt2800_bbp_write(rt2x00dev
, 59, 0x0e);
2566 else if (rf
->channel
>= 12 && rf
->channel
<= 14)
2567 rt2800_bbp_write(rt2x00dev
, 59, 0x0d);
2571 static void rt2800_config_channel_rf3322(struct rt2x00_dev
*rt2x00dev
,
2572 struct ieee80211_conf
*conf
,
2573 struct rf_channel
*rf
,
2574 struct channel_info
*info
)
2578 rt2800_rfcsr_write(rt2x00dev
, 8, rf
->rf1
);
2579 rt2800_rfcsr_write(rt2x00dev
, 9, rf
->rf3
);
2581 rt2800_rfcsr_write(rt2x00dev
, 11, 0x42);
2582 rt2800_rfcsr_write(rt2x00dev
, 12, 0x1c);
2583 rt2800_rfcsr_write(rt2x00dev
, 13, 0x00);
2585 if (info
->default_power1
> POWER_BOUND
)
2586 rt2800_rfcsr_write(rt2x00dev
, 47, POWER_BOUND
);
2588 rt2800_rfcsr_write(rt2x00dev
, 47, info
->default_power1
);
2590 if (info
->default_power2
> POWER_BOUND
)
2591 rt2800_rfcsr_write(rt2x00dev
, 48, POWER_BOUND
);
2593 rt2800_rfcsr_write(rt2x00dev
, 48, info
->default_power2
);
2595 rt2800_adjust_freq_offset(rt2x00dev
);
2597 rt2800_rfcsr_read(rt2x00dev
, 1, &rfcsr
);
2598 rt2x00_set_field8(&rfcsr
, RFCSR1_RX0_PD
, 1);
2599 rt2x00_set_field8(&rfcsr
, RFCSR1_TX0_PD
, 1);
2601 if ( rt2x00dev
->default_ant
.tx_chain_num
== 2 )
2602 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
, 1);
2604 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
, 0);
2606 if ( rt2x00dev
->default_ant
.rx_chain_num
== 2 )
2607 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
, 1);
2609 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
, 0);
2611 rt2x00_set_field8(&rfcsr
, RFCSR1_RX2_PD
, 0);
2612 rt2x00_set_field8(&rfcsr
, RFCSR1_TX2_PD
, 0);
2614 rt2800_rfcsr_write(rt2x00dev
, 1, rfcsr
);
2616 rt2800_rfcsr_write(rt2x00dev
, 31, 80);
2619 static void rt2800_config_channel_rf53xx(struct rt2x00_dev
*rt2x00dev
,
2620 struct ieee80211_conf
*conf
,
2621 struct rf_channel
*rf
,
2622 struct channel_info
*info
)
2626 rt2800_rfcsr_write(rt2x00dev
, 8, rf
->rf1
);
2627 rt2800_rfcsr_write(rt2x00dev
, 9, rf
->rf3
);
2628 rt2800_rfcsr_read(rt2x00dev
, 11, &rfcsr
);
2629 rt2x00_set_field8(&rfcsr
, RFCSR11_R
, rf
->rf2
);
2630 rt2800_rfcsr_write(rt2x00dev
, 11, rfcsr
);
2632 rt2800_rfcsr_read(rt2x00dev
, 49, &rfcsr
);
2633 if (info
->default_power1
> POWER_BOUND
)
2634 rt2x00_set_field8(&rfcsr
, RFCSR49_TX
, POWER_BOUND
);
2636 rt2x00_set_field8(&rfcsr
, RFCSR49_TX
, info
->default_power1
);
2637 rt2800_rfcsr_write(rt2x00dev
, 49, rfcsr
);
2639 if (rt2x00_rt(rt2x00dev
, RT5392
)) {
2640 rt2800_rfcsr_read(rt2x00dev
, 50, &rfcsr
);
2641 if (info
->default_power2
> POWER_BOUND
)
2642 rt2x00_set_field8(&rfcsr
, RFCSR50_TX
, POWER_BOUND
);
2644 rt2x00_set_field8(&rfcsr
, RFCSR50_TX
,
2645 info
->default_power2
);
2646 rt2800_rfcsr_write(rt2x00dev
, 50, rfcsr
);
2649 rt2800_rfcsr_read(rt2x00dev
, 1, &rfcsr
);
2650 if (rt2x00_rt(rt2x00dev
, RT5392
)) {
2651 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
, 1);
2652 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
, 1);
2654 rt2x00_set_field8(&rfcsr
, RFCSR1_RF_BLOCK_EN
, 1);
2655 rt2x00_set_field8(&rfcsr
, RFCSR1_PLL_PD
, 1);
2656 rt2x00_set_field8(&rfcsr
, RFCSR1_RX0_PD
, 1);
2657 rt2x00_set_field8(&rfcsr
, RFCSR1_TX0_PD
, 1);
2658 rt2800_rfcsr_write(rt2x00dev
, 1, rfcsr
);
2660 rt2800_adjust_freq_offset(rt2x00dev
);
2662 if (rf
->channel
<= 14) {
2663 int idx
= rf
->channel
-1;
2665 if (rt2x00_has_cap_bt_coexist(rt2x00dev
)) {
2666 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390F
)) {
2667 /* r55/r59 value array of channel 1~14 */
2668 static const char r55_bt_rev
[] = {0x83, 0x83,
2669 0x83, 0x73, 0x73, 0x63, 0x53, 0x53,
2670 0x53, 0x43, 0x43, 0x43, 0x43, 0x43};
2671 static const char r59_bt_rev
[] = {0x0e, 0x0e,
2672 0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09,
2673 0x07, 0x07, 0x07, 0x07, 0x07, 0x07};
2675 rt2800_rfcsr_write(rt2x00dev
, 55,
2677 rt2800_rfcsr_write(rt2x00dev
, 59,
2680 static const char r59_bt
[] = {0x8b, 0x8b, 0x8b,
2681 0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89,
2682 0x88, 0x88, 0x86, 0x85, 0x84};
2684 rt2800_rfcsr_write(rt2x00dev
, 59, r59_bt
[idx
]);
2687 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390F
)) {
2688 static const char r55_nonbt_rev
[] = {0x23, 0x23,
2689 0x23, 0x23, 0x13, 0x13, 0x03, 0x03,
2690 0x03, 0x03, 0x03, 0x03, 0x03, 0x03};
2691 static const char r59_nonbt_rev
[] = {0x07, 0x07,
2692 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
2693 0x07, 0x07, 0x06, 0x05, 0x04, 0x04};
2695 rt2800_rfcsr_write(rt2x00dev
, 55,
2696 r55_nonbt_rev
[idx
]);
2697 rt2800_rfcsr_write(rt2x00dev
, 59,
2698 r59_nonbt_rev
[idx
]);
2699 } else if (rt2x00_rt(rt2x00dev
, RT5390
) ||
2700 rt2x00_rt(rt2x00dev
, RT5392
)) {
2701 static const char r59_non_bt
[] = {0x8f, 0x8f,
2702 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
2703 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
2705 rt2800_rfcsr_write(rt2x00dev
, 59,
2712 static void rt2800_config_channel_rf55xx(struct rt2x00_dev
*rt2x00dev
,
2713 struct ieee80211_conf
*conf
,
2714 struct rf_channel
*rf
,
2715 struct channel_info
*info
)
2722 const bool is_11b
= false;
2723 const bool is_type_ep
= false;
2725 rt2800_register_read(rt2x00dev
, LDO_CFG0
, ®
);
2726 rt2x00_set_field32(®
, LDO_CFG0_LDO_CORE_VLEVEL
,
2727 (rf
->channel
> 14 || conf_is_ht40(conf
)) ? 5 : 0);
2728 rt2800_register_write(rt2x00dev
, LDO_CFG0
, reg
);
2730 /* Order of values on rf_channel entry: N, K, mod, R */
2731 rt2800_rfcsr_write(rt2x00dev
, 8, rf
->rf1
& 0xff);
2733 rt2800_rfcsr_read(rt2x00dev
, 9, &rfcsr
);
2734 rt2x00_set_field8(&rfcsr
, RFCSR9_K
, rf
->rf2
& 0xf);
2735 rt2x00_set_field8(&rfcsr
, RFCSR9_N
, (rf
->rf1
& 0x100) >> 8);
2736 rt2x00_set_field8(&rfcsr
, RFCSR9_MOD
, ((rf
->rf3
- 8) & 0x4) >> 2);
2737 rt2800_rfcsr_write(rt2x00dev
, 9, rfcsr
);
2739 rt2800_rfcsr_read(rt2x00dev
, 11, &rfcsr
);
2740 rt2x00_set_field8(&rfcsr
, RFCSR11_R
, rf
->rf4
- 1);
2741 rt2x00_set_field8(&rfcsr
, RFCSR11_MOD
, (rf
->rf3
- 8) & 0x3);
2742 rt2800_rfcsr_write(rt2x00dev
, 11, rfcsr
);
2744 if (rf
->channel
<= 14) {
2745 rt2800_rfcsr_write(rt2x00dev
, 10, 0x90);
2746 /* FIXME: RF11 owerwrite ? */
2747 rt2800_rfcsr_write(rt2x00dev
, 11, 0x4A);
2748 rt2800_rfcsr_write(rt2x00dev
, 12, 0x52);
2749 rt2800_rfcsr_write(rt2x00dev
, 13, 0x42);
2750 rt2800_rfcsr_write(rt2x00dev
, 22, 0x40);
2751 rt2800_rfcsr_write(rt2x00dev
, 24, 0x4A);
2752 rt2800_rfcsr_write(rt2x00dev
, 25, 0x80);
2753 rt2800_rfcsr_write(rt2x00dev
, 27, 0x42);
2754 rt2800_rfcsr_write(rt2x00dev
, 36, 0x80);
2755 rt2800_rfcsr_write(rt2x00dev
, 37, 0x08);
2756 rt2800_rfcsr_write(rt2x00dev
, 38, 0x89);
2757 rt2800_rfcsr_write(rt2x00dev
, 39, 0x1B);
2758 rt2800_rfcsr_write(rt2x00dev
, 40, 0x0D);
2759 rt2800_rfcsr_write(rt2x00dev
, 41, 0x9B);
2760 rt2800_rfcsr_write(rt2x00dev
, 42, 0xD5);
2761 rt2800_rfcsr_write(rt2x00dev
, 43, 0x72);
2762 rt2800_rfcsr_write(rt2x00dev
, 44, 0x0E);
2763 rt2800_rfcsr_write(rt2x00dev
, 45, 0xA2);
2764 rt2800_rfcsr_write(rt2x00dev
, 46, 0x6B);
2765 rt2800_rfcsr_write(rt2x00dev
, 48, 0x10);
2766 rt2800_rfcsr_write(rt2x00dev
, 51, 0x3E);
2767 rt2800_rfcsr_write(rt2x00dev
, 52, 0x48);
2768 rt2800_rfcsr_write(rt2x00dev
, 54, 0x38);
2769 rt2800_rfcsr_write(rt2x00dev
, 56, 0xA1);
2770 rt2800_rfcsr_write(rt2x00dev
, 57, 0x00);
2771 rt2800_rfcsr_write(rt2x00dev
, 58, 0x39);
2772 rt2800_rfcsr_write(rt2x00dev
, 60, 0x45);
2773 rt2800_rfcsr_write(rt2x00dev
, 61, 0x91);
2774 rt2800_rfcsr_write(rt2x00dev
, 62, 0x39);
2776 /* TODO RF27 <- tssi */
2778 rfcsr
= rf
->channel
<= 10 ? 0x07 : 0x06;
2779 rt2800_rfcsr_write(rt2x00dev
, 23, rfcsr
);
2780 rt2800_rfcsr_write(rt2x00dev
, 59, rfcsr
);
2784 rt2800_rfcsr_write(rt2x00dev
, 31, 0xF8);
2785 rt2800_rfcsr_write(rt2x00dev
, 32, 0xC0);
2787 rt2800_rfcsr_write(rt2x00dev
, 55, 0x06);
2789 rt2800_rfcsr_write(rt2x00dev
, 55, 0x47);
2793 rt2800_rfcsr_write(rt2x00dev
, 55, 0x03);
2795 rt2800_rfcsr_write(rt2x00dev
, 55, 0x43);
2798 power_bound
= POWER_BOUND
;
2801 rt2800_rfcsr_write(rt2x00dev
, 10, 0x97);
2802 /* FIMXE: RF11 overwrite */
2803 rt2800_rfcsr_write(rt2x00dev
, 11, 0x40);
2804 rt2800_rfcsr_write(rt2x00dev
, 25, 0xBF);
2805 rt2800_rfcsr_write(rt2x00dev
, 27, 0x42);
2806 rt2800_rfcsr_write(rt2x00dev
, 36, 0x00);
2807 rt2800_rfcsr_write(rt2x00dev
, 37, 0x04);
2808 rt2800_rfcsr_write(rt2x00dev
, 38, 0x85);
2809 rt2800_rfcsr_write(rt2x00dev
, 40, 0x42);
2810 rt2800_rfcsr_write(rt2x00dev
, 41, 0xBB);
2811 rt2800_rfcsr_write(rt2x00dev
, 42, 0xD7);
2812 rt2800_rfcsr_write(rt2x00dev
, 45, 0x41);
2813 rt2800_rfcsr_write(rt2x00dev
, 48, 0x00);
2814 rt2800_rfcsr_write(rt2x00dev
, 57, 0x77);
2815 rt2800_rfcsr_write(rt2x00dev
, 60, 0x05);
2816 rt2800_rfcsr_write(rt2x00dev
, 61, 0x01);
2818 /* TODO RF27 <- tssi */
2820 if (rf
->channel
>= 36 && rf
->channel
<= 64) {
2822 rt2800_rfcsr_write(rt2x00dev
, 12, 0x2E);
2823 rt2800_rfcsr_write(rt2x00dev
, 13, 0x22);
2824 rt2800_rfcsr_write(rt2x00dev
, 22, 0x60);
2825 rt2800_rfcsr_write(rt2x00dev
, 23, 0x7F);
2826 if (rf
->channel
<= 50)
2827 rt2800_rfcsr_write(rt2x00dev
, 24, 0x09);
2828 else if (rf
->channel
>= 52)
2829 rt2800_rfcsr_write(rt2x00dev
, 24, 0x07);
2830 rt2800_rfcsr_write(rt2x00dev
, 39, 0x1C);
2831 rt2800_rfcsr_write(rt2x00dev
, 43, 0x5B);
2832 rt2800_rfcsr_write(rt2x00dev
, 44, 0X40);
2833 rt2800_rfcsr_write(rt2x00dev
, 46, 0X00);
2834 rt2800_rfcsr_write(rt2x00dev
, 51, 0xFE);
2835 rt2800_rfcsr_write(rt2x00dev
, 52, 0x0C);
2836 rt2800_rfcsr_write(rt2x00dev
, 54, 0xF8);
2837 if (rf
->channel
<= 50) {
2838 rt2800_rfcsr_write(rt2x00dev
, 55, 0x06),
2839 rt2800_rfcsr_write(rt2x00dev
, 56, 0xD3);
2840 } else if (rf
->channel
>= 52) {
2841 rt2800_rfcsr_write(rt2x00dev
, 55, 0x04);
2842 rt2800_rfcsr_write(rt2x00dev
, 56, 0xBB);
2845 rt2800_rfcsr_write(rt2x00dev
, 58, 0x15);
2846 rt2800_rfcsr_write(rt2x00dev
, 59, 0x7F);
2847 rt2800_rfcsr_write(rt2x00dev
, 62, 0x15);
2849 } else if (rf
->channel
>= 100 && rf
->channel
<= 165) {
2851 rt2800_rfcsr_write(rt2x00dev
, 12, 0x0E);
2852 rt2800_rfcsr_write(rt2x00dev
, 13, 0x42);
2853 rt2800_rfcsr_write(rt2x00dev
, 22, 0x40);
2854 if (rf
->channel
<= 153) {
2855 rt2800_rfcsr_write(rt2x00dev
, 23, 0x3C);
2856 rt2800_rfcsr_write(rt2x00dev
, 24, 0x06);
2857 } else if (rf
->channel
>= 155) {
2858 rt2800_rfcsr_write(rt2x00dev
, 23, 0x38);
2859 rt2800_rfcsr_write(rt2x00dev
, 24, 0x05);
2861 if (rf
->channel
<= 138) {
2862 rt2800_rfcsr_write(rt2x00dev
, 39, 0x1A);
2863 rt2800_rfcsr_write(rt2x00dev
, 43, 0x3B);
2864 rt2800_rfcsr_write(rt2x00dev
, 44, 0x20);
2865 rt2800_rfcsr_write(rt2x00dev
, 46, 0x18);
2866 } else if (rf
->channel
>= 140) {
2867 rt2800_rfcsr_write(rt2x00dev
, 39, 0x18);
2868 rt2800_rfcsr_write(rt2x00dev
, 43, 0x1B);
2869 rt2800_rfcsr_write(rt2x00dev
, 44, 0x10);
2870 rt2800_rfcsr_write(rt2x00dev
, 46, 0X08);
2872 if (rf
->channel
<= 124)
2873 rt2800_rfcsr_write(rt2x00dev
, 51, 0xFC);
2874 else if (rf
->channel
>= 126)
2875 rt2800_rfcsr_write(rt2x00dev
, 51, 0xEC);
2876 if (rf
->channel
<= 138)
2877 rt2800_rfcsr_write(rt2x00dev
, 52, 0x06);
2878 else if (rf
->channel
>= 140)
2879 rt2800_rfcsr_write(rt2x00dev
, 52, 0x06);
2880 rt2800_rfcsr_write(rt2x00dev
, 54, 0xEB);
2881 if (rf
->channel
<= 138)
2882 rt2800_rfcsr_write(rt2x00dev
, 55, 0x01);
2883 else if (rf
->channel
>= 140)
2884 rt2800_rfcsr_write(rt2x00dev
, 55, 0x00);
2885 if (rf
->channel
<= 128)
2886 rt2800_rfcsr_write(rt2x00dev
, 56, 0xBB);
2887 else if (rf
->channel
>= 130)
2888 rt2800_rfcsr_write(rt2x00dev
, 56, 0xAB);
2889 if (rf
->channel
<= 116)
2890 rt2800_rfcsr_write(rt2x00dev
, 58, 0x1D);
2891 else if (rf
->channel
>= 118)
2892 rt2800_rfcsr_write(rt2x00dev
, 58, 0x15);
2893 if (rf
->channel
<= 138)
2894 rt2800_rfcsr_write(rt2x00dev
, 59, 0x3F);
2895 else if (rf
->channel
>= 140)
2896 rt2800_rfcsr_write(rt2x00dev
, 59, 0x7C);
2897 if (rf
->channel
<= 116)
2898 rt2800_rfcsr_write(rt2x00dev
, 62, 0x1D);
2899 else if (rf
->channel
>= 118)
2900 rt2800_rfcsr_write(rt2x00dev
, 62, 0x15);
2903 power_bound
= POWER_BOUND_5G
;
2907 rt2800_rfcsr_read(rt2x00dev
, 49, &rfcsr
);
2908 if (info
->default_power1
> power_bound
)
2909 rt2x00_set_field8(&rfcsr
, RFCSR49_TX
, power_bound
);
2911 rt2x00_set_field8(&rfcsr
, RFCSR49_TX
, info
->default_power1
);
2913 rt2x00_set_field8(&rfcsr
, RFCSR49_EP
, ep_reg
);
2914 rt2800_rfcsr_write(rt2x00dev
, 49, rfcsr
);
2916 rt2800_rfcsr_read(rt2x00dev
, 50, &rfcsr
);
2917 if (info
->default_power2
> power_bound
)
2918 rt2x00_set_field8(&rfcsr
, RFCSR50_TX
, power_bound
);
2920 rt2x00_set_field8(&rfcsr
, RFCSR50_TX
, info
->default_power2
);
2922 rt2x00_set_field8(&rfcsr
, RFCSR50_EP
, ep_reg
);
2923 rt2800_rfcsr_write(rt2x00dev
, 50, rfcsr
);
2925 rt2800_rfcsr_read(rt2x00dev
, 1, &rfcsr
);
2926 rt2x00_set_field8(&rfcsr
, RFCSR1_RF_BLOCK_EN
, 1);
2927 rt2x00_set_field8(&rfcsr
, RFCSR1_PLL_PD
, 1);
2929 rt2x00_set_field8(&rfcsr
, RFCSR1_TX0_PD
,
2930 rt2x00dev
->default_ant
.tx_chain_num
>= 1);
2931 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
,
2932 rt2x00dev
->default_ant
.tx_chain_num
== 2);
2933 rt2x00_set_field8(&rfcsr
, RFCSR1_TX2_PD
, 0);
2935 rt2x00_set_field8(&rfcsr
, RFCSR1_RX0_PD
,
2936 rt2x00dev
->default_ant
.rx_chain_num
>= 1);
2937 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
,
2938 rt2x00dev
->default_ant
.rx_chain_num
== 2);
2939 rt2x00_set_field8(&rfcsr
, RFCSR1_RX2_PD
, 0);
2941 rt2800_rfcsr_write(rt2x00dev
, 1, rfcsr
);
2942 rt2800_rfcsr_write(rt2x00dev
, 6, 0xe4);
2944 if (conf_is_ht40(conf
))
2945 rt2800_rfcsr_write(rt2x00dev
, 30, 0x16);
2947 rt2800_rfcsr_write(rt2x00dev
, 30, 0x10);
2950 rt2800_rfcsr_write(rt2x00dev
, 31, 0x80);
2951 rt2800_rfcsr_write(rt2x00dev
, 32, 0x80);
2954 /* TODO proper frequency adjustment */
2955 rt2800_adjust_freq_offset(rt2x00dev
);
2957 /* TODO merge with others */
2958 rt2800_rfcsr_read(rt2x00dev
, 3, &rfcsr
);
2959 rt2x00_set_field8(&rfcsr
, RFCSR3_VCOCAL_EN
, 1);
2960 rt2800_rfcsr_write(rt2x00dev
, 3, rfcsr
);
2963 rt2800_bbp_write(rt2x00dev
, 62, 0x37 - rt2x00dev
->lna_gain
);
2964 rt2800_bbp_write(rt2x00dev
, 63, 0x37 - rt2x00dev
->lna_gain
);
2965 rt2800_bbp_write(rt2x00dev
, 64, 0x37 - rt2x00dev
->lna_gain
);
2967 rt2800_bbp_write(rt2x00dev
, 79, (rf
->channel
<= 14) ? 0x1C : 0x18);
2968 rt2800_bbp_write(rt2x00dev
, 80, (rf
->channel
<= 14) ? 0x0E : 0x08);
2969 rt2800_bbp_write(rt2x00dev
, 81, (rf
->channel
<= 14) ? 0x3A : 0x38);
2970 rt2800_bbp_write(rt2x00dev
, 82, (rf
->channel
<= 14) ? 0x62 : 0x92);
2972 /* GLRT band configuration */
2973 rt2800_bbp_write(rt2x00dev
, 195, 128);
2974 rt2800_bbp_write(rt2x00dev
, 196, (rf
->channel
<= 14) ? 0xE0 : 0xF0);
2975 rt2800_bbp_write(rt2x00dev
, 195, 129);
2976 rt2800_bbp_write(rt2x00dev
, 196, (rf
->channel
<= 14) ? 0x1F : 0x1E);
2977 rt2800_bbp_write(rt2x00dev
, 195, 130);
2978 rt2800_bbp_write(rt2x00dev
, 196, (rf
->channel
<= 14) ? 0x38 : 0x28);
2979 rt2800_bbp_write(rt2x00dev
, 195, 131);
2980 rt2800_bbp_write(rt2x00dev
, 196, (rf
->channel
<= 14) ? 0x32 : 0x20);
2981 rt2800_bbp_write(rt2x00dev
, 195, 133);
2982 rt2800_bbp_write(rt2x00dev
, 196, (rf
->channel
<= 14) ? 0x28 : 0x7F);
2983 rt2800_bbp_write(rt2x00dev
, 195, 124);
2984 rt2800_bbp_write(rt2x00dev
, 196, (rf
->channel
<= 14) ? 0x19 : 0x7F);
2987 static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev
*rt2x00dev
,
2988 const unsigned int word
,
2993 for (chain
= 0; chain
< rt2x00dev
->default_ant
.rx_chain_num
; chain
++) {
2994 rt2800_bbp_read(rt2x00dev
, 27, ®
);
2995 rt2x00_set_field8(®
, BBP27_RX_CHAIN_SEL
, chain
);
2996 rt2800_bbp_write(rt2x00dev
, 27, reg
);
2998 rt2800_bbp_write(rt2x00dev
, word
, value
);
3002 static void rt2800_iq_calibrate(struct rt2x00_dev
*rt2x00dev
, int channel
)
3007 rt2800_bbp_write(rt2x00dev
, 158, 0x2c);
3009 cal
= rt2x00_eeprom_byte(rt2x00dev
, EEPROM_IQ_GAIN_CAL_TX0_2G
);
3010 else if (channel
>= 36 && channel
<= 64)
3011 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3012 EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G
);
3013 else if (channel
>= 100 && channel
<= 138)
3014 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3015 EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G
);
3016 else if (channel
>= 140 && channel
<= 165)
3017 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3018 EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G
);
3021 rt2800_bbp_write(rt2x00dev
, 159, cal
);
3024 rt2800_bbp_write(rt2x00dev
, 158, 0x2d);
3026 cal
= rt2x00_eeprom_byte(rt2x00dev
, EEPROM_IQ_PHASE_CAL_TX0_2G
);
3027 else if (channel
>= 36 && channel
<= 64)
3028 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3029 EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G
);
3030 else if (channel
>= 100 && channel
<= 138)
3031 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3032 EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G
);
3033 else if (channel
>= 140 && channel
<= 165)
3034 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3035 EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G
);
3038 rt2800_bbp_write(rt2x00dev
, 159, cal
);
3041 rt2800_bbp_write(rt2x00dev
, 158, 0x4a);
3043 cal
= rt2x00_eeprom_byte(rt2x00dev
, EEPROM_IQ_GAIN_CAL_TX1_2G
);
3044 else if (channel
>= 36 && channel
<= 64)
3045 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3046 EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G
);
3047 else if (channel
>= 100 && channel
<= 138)
3048 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3049 EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G
);
3050 else if (channel
>= 140 && channel
<= 165)
3051 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3052 EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G
);
3055 rt2800_bbp_write(rt2x00dev
, 159, cal
);
3058 rt2800_bbp_write(rt2x00dev
, 158, 0x4b);
3060 cal
= rt2x00_eeprom_byte(rt2x00dev
, EEPROM_IQ_PHASE_CAL_TX1_2G
);
3061 else if (channel
>= 36 && channel
<= 64)
3062 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3063 EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G
);
3064 else if (channel
>= 100 && channel
<= 138)
3065 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3066 EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G
);
3067 else if (channel
>= 140 && channel
<= 165)
3068 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3069 EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G
);
3072 rt2800_bbp_write(rt2x00dev
, 159, cal
);
3074 /* FIXME: possible RX0, RX1 callibration ? */
3076 /* RF IQ compensation control */
3077 rt2800_bbp_write(rt2x00dev
, 158, 0x04);
3078 cal
= rt2x00_eeprom_byte(rt2x00dev
, EEPROM_RF_IQ_COMPENSATION_CONTROL
);
3079 rt2800_bbp_write(rt2x00dev
, 159, cal
!= 0xff ? cal
: 0);
3081 /* RF IQ imbalance compensation control */
3082 rt2800_bbp_write(rt2x00dev
, 158, 0x03);
3083 cal
= rt2x00_eeprom_byte(rt2x00dev
,
3084 EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL
);
3085 rt2800_bbp_write(rt2x00dev
, 159, cal
!= 0xff ? cal
: 0);
3088 static char rt2800_txpower_to_dev(struct rt2x00_dev
*rt2x00dev
,
3089 unsigned int channel
,
3092 if (rt2x00_rt(rt2x00dev
, RT3593
))
3093 txpower
= rt2x00_get_field8(txpower
, EEPROM_TXPOWER_ALC
);
3096 return clamp_t(char, txpower
, MIN_G_TXPOWER
, MAX_G_TXPOWER
);
3098 if (rt2x00_rt(rt2x00dev
, RT3593
))
3099 return clamp_t(char, txpower
, MIN_A_TXPOWER_3593
,
3100 MAX_A_TXPOWER_3593
);
3102 return clamp_t(char, txpower
, MIN_A_TXPOWER
, MAX_A_TXPOWER
);
3105 static void rt2800_config_channel(struct rt2x00_dev
*rt2x00dev
,
3106 struct ieee80211_conf
*conf
,
3107 struct rf_channel
*rf
,
3108 struct channel_info
*info
)
3111 unsigned int tx_pin
;
3114 info
->default_power1
= rt2800_txpower_to_dev(rt2x00dev
, rf
->channel
,
3115 info
->default_power1
);
3116 info
->default_power2
= rt2800_txpower_to_dev(rt2x00dev
, rf
->channel
,
3117 info
->default_power2
);
3118 if (rt2x00dev
->default_ant
.tx_chain_num
> 2)
3119 info
->default_power3
=
3120 rt2800_txpower_to_dev(rt2x00dev
, rf
->channel
,
3121 info
->default_power3
);
3123 switch (rt2x00dev
->chip
.rf
) {
3129 rt2800_config_channel_rf3xxx(rt2x00dev
, conf
, rf
, info
);
3132 rt2800_config_channel_rf3052(rt2x00dev
, conf
, rf
, info
);
3135 rt2800_config_channel_rf3053(rt2x00dev
, conf
, rf
, info
);
3138 rt2800_config_channel_rf3290(rt2x00dev
, conf
, rf
, info
);
3141 rt2800_config_channel_rf3322(rt2x00dev
, conf
, rf
, info
);
3149 rt2800_config_channel_rf53xx(rt2x00dev
, conf
, rf
, info
);
3152 rt2800_config_channel_rf55xx(rt2x00dev
, conf
, rf
, info
);
3155 rt2800_config_channel_rf2xxx(rt2x00dev
, conf
, rf
, info
);
3158 if (rt2x00_rf(rt2x00dev
, RF3070
) ||
3159 rt2x00_rf(rt2x00dev
, RF3290
) ||
3160 rt2x00_rf(rt2x00dev
, RF3322
) ||
3161 rt2x00_rf(rt2x00dev
, RF5360
) ||
3162 rt2x00_rf(rt2x00dev
, RF5370
) ||
3163 rt2x00_rf(rt2x00dev
, RF5372
) ||
3164 rt2x00_rf(rt2x00dev
, RF5390
) ||
3165 rt2x00_rf(rt2x00dev
, RF5392
)) {
3166 rt2800_rfcsr_read(rt2x00dev
, 30, &rfcsr
);
3167 rt2x00_set_field8(&rfcsr
, RFCSR30_TX_H20M
, 0);
3168 rt2x00_set_field8(&rfcsr
, RFCSR30_RX_H20M
, 0);
3169 rt2800_rfcsr_write(rt2x00dev
, 30, rfcsr
);
3171 rt2800_rfcsr_read(rt2x00dev
, 3, &rfcsr
);
3172 rt2x00_set_field8(&rfcsr
, RFCSR3_VCOCAL_EN
, 1);
3173 rt2800_rfcsr_write(rt2x00dev
, 3, rfcsr
);
3177 * Change BBP settings
3179 if (rt2x00_rt(rt2x00dev
, RT3352
)) {
3180 rt2800_bbp_write(rt2x00dev
, 27, 0x0);
3181 rt2800_bbp_write(rt2x00dev
, 66, 0x26 + rt2x00dev
->lna_gain
);
3182 rt2800_bbp_write(rt2x00dev
, 27, 0x20);
3183 rt2800_bbp_write(rt2x00dev
, 66, 0x26 + rt2x00dev
->lna_gain
);
3184 } else if (rt2x00_rt(rt2x00dev
, RT3593
)) {
3185 if (rf
->channel
> 14) {
3186 /* Disable CCK Packet detection on 5GHz */
3187 rt2800_bbp_write(rt2x00dev
, 70, 0x00);
3189 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
3192 if (conf_is_ht40(conf
))
3193 rt2800_bbp_write(rt2x00dev
, 105, 0x04);
3195 rt2800_bbp_write(rt2x00dev
, 105, 0x34);
3197 rt2800_bbp_write(rt2x00dev
, 62, 0x37 - rt2x00dev
->lna_gain
);
3198 rt2800_bbp_write(rt2x00dev
, 63, 0x37 - rt2x00dev
->lna_gain
);
3199 rt2800_bbp_write(rt2x00dev
, 64, 0x37 - rt2x00dev
->lna_gain
);
3200 rt2800_bbp_write(rt2x00dev
, 77, 0x98);
3202 rt2800_bbp_write(rt2x00dev
, 62, 0x37 - rt2x00dev
->lna_gain
);
3203 rt2800_bbp_write(rt2x00dev
, 63, 0x37 - rt2x00dev
->lna_gain
);
3204 rt2800_bbp_write(rt2x00dev
, 64, 0x37 - rt2x00dev
->lna_gain
);
3205 rt2800_bbp_write(rt2x00dev
, 86, 0);
3208 if (rf
->channel
<= 14) {
3209 if (!rt2x00_rt(rt2x00dev
, RT5390
) &&
3210 !rt2x00_rt(rt2x00dev
, RT5392
)) {
3211 if (rt2x00_has_cap_external_lna_bg(rt2x00dev
)) {
3212 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
3213 rt2800_bbp_write(rt2x00dev
, 75, 0x46);
3215 if (rt2x00_rt(rt2x00dev
, RT3593
))
3216 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
3218 rt2800_bbp_write(rt2x00dev
, 82, 0x84);
3219 rt2800_bbp_write(rt2x00dev
, 75, 0x50);
3221 if (rt2x00_rt(rt2x00dev
, RT3593
))
3222 rt2800_bbp_write(rt2x00dev
, 83, 0x8a);
3226 if (rt2x00_rt(rt2x00dev
, RT3572
))
3227 rt2800_bbp_write(rt2x00dev
, 82, 0x94);
3228 else if (rt2x00_rt(rt2x00dev
, RT3593
))
3229 rt2800_bbp_write(rt2x00dev
, 82, 0x82);
3231 rt2800_bbp_write(rt2x00dev
, 82, 0xf2);
3233 if (rt2x00_rt(rt2x00dev
, RT3593
))
3234 rt2800_bbp_write(rt2x00dev
, 83, 0x9a);
3236 if (rt2x00_has_cap_external_lna_a(rt2x00dev
))
3237 rt2800_bbp_write(rt2x00dev
, 75, 0x46);
3239 rt2800_bbp_write(rt2x00dev
, 75, 0x50);
3242 rt2800_register_read(rt2x00dev
, TX_BAND_CFG
, ®
);
3243 rt2x00_set_field32(®
, TX_BAND_CFG_HT40_MINUS
, conf_is_ht40_minus(conf
));
3244 rt2x00_set_field32(®
, TX_BAND_CFG_A
, rf
->channel
> 14);
3245 rt2x00_set_field32(®
, TX_BAND_CFG_BG
, rf
->channel
<= 14);
3246 rt2800_register_write(rt2x00dev
, TX_BAND_CFG
, reg
);
3248 if (rt2x00_rt(rt2x00dev
, RT3572
))
3249 rt2800_rfcsr_write(rt2x00dev
, 8, 0);
3253 switch (rt2x00dev
->default_ant
.tx_chain_num
) {
3255 /* Turn on tertiary PAs */
3256 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_A2_EN
,
3258 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_G2_EN
,
3262 /* Turn on secondary PAs */
3263 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_A1_EN
,
3265 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_G1_EN
,
3269 /* Turn on primary PAs */
3270 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_A0_EN
,
3272 if (rt2x00_has_cap_bt_coexist(rt2x00dev
))
3273 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_G0_EN
, 1);
3275 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_G0_EN
,
3280 switch (rt2x00dev
->default_ant
.rx_chain_num
) {
3282 /* Turn on tertiary LNAs */
3283 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_LNA_PE_A2_EN
, 1);
3284 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_LNA_PE_G2_EN
, 1);
3287 /* Turn on secondary LNAs */
3288 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_LNA_PE_A1_EN
, 1);
3289 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_LNA_PE_G1_EN
, 1);
3292 /* Turn on primary LNAs */
3293 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_LNA_PE_A0_EN
, 1);
3294 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_LNA_PE_G0_EN
, 1);
3298 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_RFTR_EN
, 1);
3299 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_TRSW_EN
, 1);
3301 rt2800_register_write(rt2x00dev
, TX_PIN_CFG
, tx_pin
);
3303 if (rt2x00_rt(rt2x00dev
, RT3572
)) {
3304 rt2800_rfcsr_write(rt2x00dev
, 8, 0x80);
3307 if (rf
->channel
<= 14)
3308 reg
= 0x1c + (2 * rt2x00dev
->lna_gain
);
3310 reg
= 0x22 + ((rt2x00dev
->lna_gain
* 5) / 3);
3312 rt2800_bbp_write_with_rx_chain(rt2x00dev
, 66, reg
);
3315 if (rt2x00_rt(rt2x00dev
, RT3593
)) {
3316 rt2800_register_read(rt2x00dev
, GPIO_CTRL
, ®
);
3318 /* Band selection */
3319 if (rt2x00_is_usb(rt2x00dev
) ||
3320 rt2x00_is_pcie(rt2x00dev
)) {
3321 /* GPIO #8 controls all paths */
3322 rt2x00_set_field32(®
, GPIO_CTRL_DIR8
, 0);
3323 if (rf
->channel
<= 14)
3324 rt2x00_set_field32(®
, GPIO_CTRL_VAL8
, 1);
3326 rt2x00_set_field32(®
, GPIO_CTRL_VAL8
, 0);
3329 /* LNA PE control. */
3330 if (rt2x00_is_usb(rt2x00dev
)) {
3331 /* GPIO #4 controls PE0 and PE1,
3332 * GPIO #7 controls PE2
3334 rt2x00_set_field32(®
, GPIO_CTRL_DIR4
, 0);
3335 rt2x00_set_field32(®
, GPIO_CTRL_DIR7
, 0);
3337 rt2x00_set_field32(®
, GPIO_CTRL_VAL4
, 1);
3338 rt2x00_set_field32(®
, GPIO_CTRL_VAL7
, 1);
3339 } else if (rt2x00_is_pcie(rt2x00dev
)) {
3340 /* GPIO #4 controls PE0, PE1 and PE2 */
3341 rt2x00_set_field32(®
, GPIO_CTRL_DIR4
, 0);
3342 rt2x00_set_field32(®
, GPIO_CTRL_VAL4
, 1);
3345 rt2800_register_write(rt2x00dev
, GPIO_CTRL
, reg
);
3348 if (rf
->channel
<= 14)
3349 reg
= 0x1c + 2 * rt2x00dev
->lna_gain
;
3351 reg
= 0x22 + ((rt2x00dev
->lna_gain
* 5) / 3);
3353 rt2800_bbp_write_with_rx_chain(rt2x00dev
, 66, reg
);
3355 usleep_range(1000, 1500);
3358 if (rt2x00_rt(rt2x00dev
, RT5592
)) {
3359 rt2800_bbp_write(rt2x00dev
, 195, 141);
3360 rt2800_bbp_write(rt2x00dev
, 196, conf_is_ht40(conf
) ? 0x10 : 0x1a);
3363 reg
= (rf
->channel
<= 14 ? 0x1c : 0x24) + 2 * rt2x00dev
->lna_gain
;
3364 rt2800_bbp_write_with_rx_chain(rt2x00dev
, 66, reg
);
3366 rt2800_iq_calibrate(rt2x00dev
, rf
->channel
);
3369 rt2800_bbp_read(rt2x00dev
, 4, &bbp
);
3370 rt2x00_set_field8(&bbp
, BBP4_BANDWIDTH
, 2 * conf_is_ht40(conf
));
3371 rt2800_bbp_write(rt2x00dev
, 4, bbp
);
3373 rt2800_bbp_read(rt2x00dev
, 3, &bbp
);
3374 rt2x00_set_field8(&bbp
, BBP3_HT40_MINUS
, conf_is_ht40_minus(conf
));
3375 rt2800_bbp_write(rt2x00dev
, 3, bbp
);
3377 if (rt2x00_rt_rev(rt2x00dev
, RT2860
, REV_RT2860C
)) {
3378 if (conf_is_ht40(conf
)) {
3379 rt2800_bbp_write(rt2x00dev
, 69, 0x1a);
3380 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
3381 rt2800_bbp_write(rt2x00dev
, 73, 0x16);
3383 rt2800_bbp_write(rt2x00dev
, 69, 0x16);
3384 rt2800_bbp_write(rt2x00dev
, 70, 0x08);
3385 rt2800_bbp_write(rt2x00dev
, 73, 0x11);
3392 * Clear channel statistic counters
3394 rt2800_register_read(rt2x00dev
, CH_IDLE_STA
, ®
);
3395 rt2800_register_read(rt2x00dev
, CH_BUSY_STA
, ®
);
3396 rt2800_register_read(rt2x00dev
, CH_BUSY_STA_SEC
, ®
);
3401 if (rt2x00_rt(rt2x00dev
, RT3352
)) {
3402 rt2800_bbp_read(rt2x00dev
, 49, &bbp
);
3403 rt2x00_set_field8(&bbp
, BBP49_UPDATE_FLAG
, 0);
3404 rt2800_bbp_write(rt2x00dev
, 49, bbp
);
3408 static int rt2800_get_gain_calibration_delta(struct rt2x00_dev
*rt2x00dev
)
3417 * First check if temperature compensation is supported.
3419 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF1
, &eeprom
);
3420 if (!rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC
))
3424 * Read TSSI boundaries for temperature compensation from
3427 * Array idx 0 1 2 3 4 5 6 7 8
3428 * Matching Delta value -4 -3 -2 -1 0 +1 +2 +3 +4
3429 * Example TSSI bounds 0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00
3431 if (rt2x00dev
->curr_band
== IEEE80211_BAND_2GHZ
) {
3432 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_BG1
, &eeprom
);
3433 tssi_bounds
[0] = rt2x00_get_field16(eeprom
,
3434 EEPROM_TSSI_BOUND_BG1_MINUS4
);
3435 tssi_bounds
[1] = rt2x00_get_field16(eeprom
,
3436 EEPROM_TSSI_BOUND_BG1_MINUS3
);
3438 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_BG2
, &eeprom
);
3439 tssi_bounds
[2] = rt2x00_get_field16(eeprom
,
3440 EEPROM_TSSI_BOUND_BG2_MINUS2
);
3441 tssi_bounds
[3] = rt2x00_get_field16(eeprom
,
3442 EEPROM_TSSI_BOUND_BG2_MINUS1
);
3444 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_BG3
, &eeprom
);
3445 tssi_bounds
[4] = rt2x00_get_field16(eeprom
,
3446 EEPROM_TSSI_BOUND_BG3_REF
);
3447 tssi_bounds
[5] = rt2x00_get_field16(eeprom
,
3448 EEPROM_TSSI_BOUND_BG3_PLUS1
);
3450 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_BG4
, &eeprom
);
3451 tssi_bounds
[6] = rt2x00_get_field16(eeprom
,
3452 EEPROM_TSSI_BOUND_BG4_PLUS2
);
3453 tssi_bounds
[7] = rt2x00_get_field16(eeprom
,
3454 EEPROM_TSSI_BOUND_BG4_PLUS3
);
3456 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_BG5
, &eeprom
);
3457 tssi_bounds
[8] = rt2x00_get_field16(eeprom
,
3458 EEPROM_TSSI_BOUND_BG5_PLUS4
);
3460 step
= rt2x00_get_field16(eeprom
,
3461 EEPROM_TSSI_BOUND_BG5_AGC_STEP
);
3463 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_A1
, &eeprom
);
3464 tssi_bounds
[0] = rt2x00_get_field16(eeprom
,
3465 EEPROM_TSSI_BOUND_A1_MINUS4
);
3466 tssi_bounds
[1] = rt2x00_get_field16(eeprom
,
3467 EEPROM_TSSI_BOUND_A1_MINUS3
);
3469 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_A2
, &eeprom
);
3470 tssi_bounds
[2] = rt2x00_get_field16(eeprom
,
3471 EEPROM_TSSI_BOUND_A2_MINUS2
);
3472 tssi_bounds
[3] = rt2x00_get_field16(eeprom
,
3473 EEPROM_TSSI_BOUND_A2_MINUS1
);
3475 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_A3
, &eeprom
);
3476 tssi_bounds
[4] = rt2x00_get_field16(eeprom
,
3477 EEPROM_TSSI_BOUND_A3_REF
);
3478 tssi_bounds
[5] = rt2x00_get_field16(eeprom
,
3479 EEPROM_TSSI_BOUND_A3_PLUS1
);
3481 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_A4
, &eeprom
);
3482 tssi_bounds
[6] = rt2x00_get_field16(eeprom
,
3483 EEPROM_TSSI_BOUND_A4_PLUS2
);
3484 tssi_bounds
[7] = rt2x00_get_field16(eeprom
,
3485 EEPROM_TSSI_BOUND_A4_PLUS3
);
3487 rt2800_eeprom_read(rt2x00dev
, EEPROM_TSSI_BOUND_A5
, &eeprom
);
3488 tssi_bounds
[8] = rt2x00_get_field16(eeprom
,
3489 EEPROM_TSSI_BOUND_A5_PLUS4
);
3491 step
= rt2x00_get_field16(eeprom
,
3492 EEPROM_TSSI_BOUND_A5_AGC_STEP
);
3496 * Check if temperature compensation is supported.
3498 if (tssi_bounds
[4] == 0xff || step
== 0xff)
3502 * Read current TSSI (BBP 49).
3504 rt2800_bbp_read(rt2x00dev
, 49, ¤t_tssi
);
3507 * Compare TSSI value (BBP49) with the compensation boundaries
3508 * from the EEPROM and increase or decrease tx power.
3510 for (i
= 0; i
<= 3; i
++) {
3511 if (current_tssi
> tssi_bounds
[i
])
3516 for (i
= 8; i
>= 5; i
--) {
3517 if (current_tssi
< tssi_bounds
[i
])
3522 return (i
- 4) * step
;
3525 static int rt2800_get_txpower_bw_comp(struct rt2x00_dev
*rt2x00dev
,
3526 enum ieee80211_band band
)
3533 rt2800_eeprom_read(rt2x00dev
, EEPROM_TXPOWER_DELTA
, &eeprom
);
3536 * HT40 compensation not required.
3538 if (eeprom
== 0xffff ||
3539 !test_bit(CONFIG_CHANNEL_HT40
, &rt2x00dev
->flags
))
3542 if (band
== IEEE80211_BAND_2GHZ
) {
3543 comp_en
= rt2x00_get_field16(eeprom
,
3544 EEPROM_TXPOWER_DELTA_ENABLE_2G
);
3546 comp_type
= rt2x00_get_field16(eeprom
,
3547 EEPROM_TXPOWER_DELTA_TYPE_2G
);
3548 comp_value
= rt2x00_get_field16(eeprom
,
3549 EEPROM_TXPOWER_DELTA_VALUE_2G
);
3551 comp_value
= -comp_value
;
3554 comp_en
= rt2x00_get_field16(eeprom
,
3555 EEPROM_TXPOWER_DELTA_ENABLE_5G
);
3557 comp_type
= rt2x00_get_field16(eeprom
,
3558 EEPROM_TXPOWER_DELTA_TYPE_5G
);
3559 comp_value
= rt2x00_get_field16(eeprom
,
3560 EEPROM_TXPOWER_DELTA_VALUE_5G
);
3562 comp_value
= -comp_value
;
3569 static int rt2800_get_txpower_reg_delta(struct rt2x00_dev
*rt2x00dev
,
3570 int power_level
, int max_power
)
3574 if (rt2x00_has_cap_power_limit(rt2x00dev
))
3578 * XXX: We don't know the maximum transmit power of our hardware since
3579 * the EEPROM doesn't expose it. We only know that we are calibrated
3582 * Hence, we assume the regulatory limit that cfg80211 calulated for
3583 * the current channel is our maximum and if we are requested to lower
3584 * the value we just reduce our tx power accordingly.
3586 delta
= power_level
- max_power
;
3587 return min(delta
, 0);
3590 static u8
rt2800_compensate_txpower(struct rt2x00_dev
*rt2x00dev
, int is_rate_b
,
3591 enum ieee80211_band band
, int power_level
,
3592 u8 txpower
, int delta
)
3597 u8 eirp_txpower_criterion
;
3600 if (rt2x00_rt(rt2x00dev
, RT3593
))
3601 return min_t(u8
, txpower
, 0xc);
3603 if (rt2x00_has_cap_power_limit(rt2x00dev
)) {
3605 * Check if eirp txpower exceed txpower_limit.
3606 * We use OFDM 6M as criterion and its eirp txpower
3607 * is stored at EEPROM_EIRP_MAX_TX_POWER.
3608 * .11b data rate need add additional 4dbm
3609 * when calculating eirp txpower.
3611 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
3613 criterion
= rt2x00_get_field16(eeprom
,
3614 EEPROM_TXPOWER_BYRATE_RATE0
);
3616 rt2800_eeprom_read(rt2x00dev
, EEPROM_EIRP_MAX_TX_POWER
,
3619 if (band
== IEEE80211_BAND_2GHZ
)
3620 eirp_txpower_criterion
= rt2x00_get_field16(eeprom
,
3621 EEPROM_EIRP_MAX_TX_POWER_2GHZ
);
3623 eirp_txpower_criterion
= rt2x00_get_field16(eeprom
,
3624 EEPROM_EIRP_MAX_TX_POWER_5GHZ
);
3626 eirp_txpower
= eirp_txpower_criterion
+ (txpower
- criterion
) +
3627 (is_rate_b
? 4 : 0) + delta
;
3629 reg_limit
= (eirp_txpower
> power_level
) ?
3630 (eirp_txpower
- power_level
) : 0;
3634 txpower
= max(0, txpower
+ delta
- reg_limit
);
3635 return min_t(u8
, txpower
, 0xc);
3650 TX_PWR_CFG_0_EXT_IDX
,
3651 TX_PWR_CFG_1_EXT_IDX
,
3652 TX_PWR_CFG_2_EXT_IDX
,
3653 TX_PWR_CFG_3_EXT_IDX
,
3654 TX_PWR_CFG_4_EXT_IDX
,
3655 TX_PWR_CFG_IDX_COUNT
,
3658 static void rt2800_config_txpower_rt3593(struct rt2x00_dev
*rt2x00dev
,
3659 struct ieee80211_channel
*chan
,
3664 u32 regs
[TX_PWR_CFG_IDX_COUNT
];
3665 unsigned int offset
;
3666 enum ieee80211_band band
= chan
->band
;
3670 memset(regs
, '\0', sizeof(regs
));
3672 /* TODO: adapt TX power reduction from the rt28xx code */
3674 /* calculate temperature compensation delta */
3675 delta
= rt2800_get_gain_calibration_delta(rt2x00dev
);
3677 if (band
== IEEE80211_BAND_5GHZ
)
3682 if (test_bit(CONFIG_CHANNEL_HT40
, &rt2x00dev
->flags
))
3685 /* read the next four txpower values */
3686 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
3690 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE0
);
3691 txpower
= rt2800_compensate_txpower(rt2x00dev
, 1, band
, power_level
,
3693 rt2x00_set_field32(®s
[TX_PWR_CFG_0_IDX
],
3694 TX_PWR_CFG_0_CCK1_CH0
, txpower
);
3695 rt2x00_set_field32(®s
[TX_PWR_CFG_0_IDX
],
3696 TX_PWR_CFG_0_CCK1_CH1
, txpower
);
3697 rt2x00_set_field32(®s
[TX_PWR_CFG_0_EXT_IDX
],
3698 TX_PWR_CFG_0_EXT_CCK1_CH2
, txpower
);
3700 /* CCK 5.5MBS,11MBS */
3701 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE1
);
3702 txpower
= rt2800_compensate_txpower(rt2x00dev
, 1, band
, power_level
,
3704 rt2x00_set_field32(®s
[TX_PWR_CFG_0_IDX
],
3705 TX_PWR_CFG_0_CCK5_CH0
, txpower
);
3706 rt2x00_set_field32(®s
[TX_PWR_CFG_0_IDX
],
3707 TX_PWR_CFG_0_CCK5_CH1
, txpower
);
3708 rt2x00_set_field32(®s
[TX_PWR_CFG_0_EXT_IDX
],
3709 TX_PWR_CFG_0_EXT_CCK5_CH2
, txpower
);
3711 /* OFDM 6MBS,9MBS */
3712 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE2
);
3713 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3715 rt2x00_set_field32(®s
[TX_PWR_CFG_0_IDX
],
3716 TX_PWR_CFG_0_OFDM6_CH0
, txpower
);
3717 rt2x00_set_field32(®s
[TX_PWR_CFG_0_IDX
],
3718 TX_PWR_CFG_0_OFDM6_CH1
, txpower
);
3719 rt2x00_set_field32(®s
[TX_PWR_CFG_0_EXT_IDX
],
3720 TX_PWR_CFG_0_EXT_OFDM6_CH2
, txpower
);
3722 /* OFDM 12MBS,18MBS */
3723 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE3
);
3724 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3726 rt2x00_set_field32(®s
[TX_PWR_CFG_0_IDX
],
3727 TX_PWR_CFG_0_OFDM12_CH0
, txpower
);
3728 rt2x00_set_field32(®s
[TX_PWR_CFG_0_IDX
],
3729 TX_PWR_CFG_0_OFDM12_CH1
, txpower
);
3730 rt2x00_set_field32(®s
[TX_PWR_CFG_0_EXT_IDX
],
3731 TX_PWR_CFG_0_EXT_OFDM12_CH2
, txpower
);
3733 /* read the next four txpower values */
3734 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
3735 offset
+ 1, &eeprom
);
3737 /* OFDM 24MBS,36MBS */
3738 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE0
);
3739 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3741 rt2x00_set_field32(®s
[TX_PWR_CFG_1_IDX
],
3742 TX_PWR_CFG_1_OFDM24_CH0
, txpower
);
3743 rt2x00_set_field32(®s
[TX_PWR_CFG_1_IDX
],
3744 TX_PWR_CFG_1_OFDM24_CH1
, txpower
);
3745 rt2x00_set_field32(®s
[TX_PWR_CFG_1_EXT_IDX
],
3746 TX_PWR_CFG_1_EXT_OFDM24_CH2
, txpower
);
3749 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE1
);
3750 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3752 rt2x00_set_field32(®s
[TX_PWR_CFG_1_IDX
],
3753 TX_PWR_CFG_1_OFDM48_CH0
, txpower
);
3754 rt2x00_set_field32(®s
[TX_PWR_CFG_1_IDX
],
3755 TX_PWR_CFG_1_OFDM48_CH1
, txpower
);
3756 rt2x00_set_field32(®s
[TX_PWR_CFG_1_EXT_IDX
],
3757 TX_PWR_CFG_1_EXT_OFDM48_CH2
, txpower
);
3760 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE2
);
3761 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3763 rt2x00_set_field32(®s
[TX_PWR_CFG_7_IDX
],
3764 TX_PWR_CFG_7_OFDM54_CH0
, txpower
);
3765 rt2x00_set_field32(®s
[TX_PWR_CFG_7_IDX
],
3766 TX_PWR_CFG_7_OFDM54_CH1
, txpower
);
3767 rt2x00_set_field32(®s
[TX_PWR_CFG_7_IDX
],
3768 TX_PWR_CFG_7_OFDM54_CH2
, txpower
);
3770 /* read the next four txpower values */
3771 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
3772 offset
+ 2, &eeprom
);
3775 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE0
);
3776 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3778 rt2x00_set_field32(®s
[TX_PWR_CFG_1_IDX
],
3779 TX_PWR_CFG_1_MCS0_CH0
, txpower
);
3780 rt2x00_set_field32(®s
[TX_PWR_CFG_1_IDX
],
3781 TX_PWR_CFG_1_MCS0_CH1
, txpower
);
3782 rt2x00_set_field32(®s
[TX_PWR_CFG_1_EXT_IDX
],
3783 TX_PWR_CFG_1_EXT_MCS0_CH2
, txpower
);
3786 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE1
);
3787 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3789 rt2x00_set_field32(®s
[TX_PWR_CFG_1_IDX
],
3790 TX_PWR_CFG_1_MCS2_CH0
, txpower
);
3791 rt2x00_set_field32(®s
[TX_PWR_CFG_1_IDX
],
3792 TX_PWR_CFG_1_MCS2_CH1
, txpower
);
3793 rt2x00_set_field32(®s
[TX_PWR_CFG_1_EXT_IDX
],
3794 TX_PWR_CFG_1_EXT_MCS2_CH2
, txpower
);
3797 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE2
);
3798 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3800 rt2x00_set_field32(®s
[TX_PWR_CFG_2_IDX
],
3801 TX_PWR_CFG_2_MCS4_CH0
, txpower
);
3802 rt2x00_set_field32(®s
[TX_PWR_CFG_2_IDX
],
3803 TX_PWR_CFG_2_MCS4_CH1
, txpower
);
3804 rt2x00_set_field32(®s
[TX_PWR_CFG_2_EXT_IDX
],
3805 TX_PWR_CFG_2_EXT_MCS4_CH2
, txpower
);
3808 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE3
);
3809 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3811 rt2x00_set_field32(®s
[TX_PWR_CFG_2_IDX
],
3812 TX_PWR_CFG_2_MCS6_CH0
, txpower
);
3813 rt2x00_set_field32(®s
[TX_PWR_CFG_2_IDX
],
3814 TX_PWR_CFG_2_MCS6_CH1
, txpower
);
3815 rt2x00_set_field32(®s
[TX_PWR_CFG_2_EXT_IDX
],
3816 TX_PWR_CFG_2_EXT_MCS6_CH2
, txpower
);
3818 /* read the next four txpower values */
3819 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
3820 offset
+ 3, &eeprom
);
3823 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE0
);
3824 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3826 rt2x00_set_field32(®s
[TX_PWR_CFG_7_IDX
],
3827 TX_PWR_CFG_7_MCS7_CH0
, txpower
);
3828 rt2x00_set_field32(®s
[TX_PWR_CFG_7_IDX
],
3829 TX_PWR_CFG_7_MCS7_CH1
, txpower
);
3830 rt2x00_set_field32(®s
[TX_PWR_CFG_7_IDX
],
3831 TX_PWR_CFG_7_MCS7_CH2
, txpower
);
3834 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE1
);
3835 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3837 rt2x00_set_field32(®s
[TX_PWR_CFG_2_IDX
],
3838 TX_PWR_CFG_2_MCS8_CH0
, txpower
);
3839 rt2x00_set_field32(®s
[TX_PWR_CFG_2_IDX
],
3840 TX_PWR_CFG_2_MCS8_CH1
, txpower
);
3841 rt2x00_set_field32(®s
[TX_PWR_CFG_2_EXT_IDX
],
3842 TX_PWR_CFG_2_EXT_MCS8_CH2
, txpower
);
3845 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE2
);
3846 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3848 rt2x00_set_field32(®s
[TX_PWR_CFG_2_IDX
],
3849 TX_PWR_CFG_2_MCS10_CH0
, txpower
);
3850 rt2x00_set_field32(®s
[TX_PWR_CFG_2_IDX
],
3851 TX_PWR_CFG_2_MCS10_CH1
, txpower
);
3852 rt2x00_set_field32(®s
[TX_PWR_CFG_2_EXT_IDX
],
3853 TX_PWR_CFG_2_EXT_MCS10_CH2
, txpower
);
3856 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE3
);
3857 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3859 rt2x00_set_field32(®s
[TX_PWR_CFG_3_IDX
],
3860 TX_PWR_CFG_3_MCS12_CH0
, txpower
);
3861 rt2x00_set_field32(®s
[TX_PWR_CFG_3_IDX
],
3862 TX_PWR_CFG_3_MCS12_CH1
, txpower
);
3863 rt2x00_set_field32(®s
[TX_PWR_CFG_3_EXT_IDX
],
3864 TX_PWR_CFG_3_EXT_MCS12_CH2
, txpower
);
3866 /* read the next four txpower values */
3867 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
3868 offset
+ 4, &eeprom
);
3871 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE0
);
3872 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3874 rt2x00_set_field32(®s
[TX_PWR_CFG_3_IDX
],
3875 TX_PWR_CFG_3_MCS14_CH0
, txpower
);
3876 rt2x00_set_field32(®s
[TX_PWR_CFG_3_IDX
],
3877 TX_PWR_CFG_3_MCS14_CH1
, txpower
);
3878 rt2x00_set_field32(®s
[TX_PWR_CFG_3_EXT_IDX
],
3879 TX_PWR_CFG_3_EXT_MCS14_CH2
, txpower
);
3882 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE1
);
3883 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3885 rt2x00_set_field32(®s
[TX_PWR_CFG_8_IDX
],
3886 TX_PWR_CFG_8_MCS15_CH0
, txpower
);
3887 rt2x00_set_field32(®s
[TX_PWR_CFG_8_IDX
],
3888 TX_PWR_CFG_8_MCS15_CH1
, txpower
);
3889 rt2x00_set_field32(®s
[TX_PWR_CFG_8_IDX
],
3890 TX_PWR_CFG_8_MCS15_CH2
, txpower
);
3893 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE2
);
3894 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3896 rt2x00_set_field32(®s
[TX_PWR_CFG_5_IDX
],
3897 TX_PWR_CFG_5_MCS16_CH0
, txpower
);
3898 rt2x00_set_field32(®s
[TX_PWR_CFG_5_IDX
],
3899 TX_PWR_CFG_5_MCS16_CH1
, txpower
);
3900 rt2x00_set_field32(®s
[TX_PWR_CFG_5_IDX
],
3901 TX_PWR_CFG_5_MCS16_CH2
, txpower
);
3904 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE3
);
3905 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3907 rt2x00_set_field32(®s
[TX_PWR_CFG_5_IDX
],
3908 TX_PWR_CFG_5_MCS18_CH0
, txpower
);
3909 rt2x00_set_field32(®s
[TX_PWR_CFG_5_IDX
],
3910 TX_PWR_CFG_5_MCS18_CH1
, txpower
);
3911 rt2x00_set_field32(®s
[TX_PWR_CFG_5_IDX
],
3912 TX_PWR_CFG_5_MCS18_CH2
, txpower
);
3914 /* read the next four txpower values */
3915 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
3916 offset
+ 5, &eeprom
);
3919 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE0
);
3920 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3922 rt2x00_set_field32(®s
[TX_PWR_CFG_6_IDX
],
3923 TX_PWR_CFG_6_MCS20_CH0
, txpower
);
3924 rt2x00_set_field32(®s
[TX_PWR_CFG_6_IDX
],
3925 TX_PWR_CFG_6_MCS20_CH1
, txpower
);
3926 rt2x00_set_field32(®s
[TX_PWR_CFG_6_IDX
],
3927 TX_PWR_CFG_6_MCS20_CH2
, txpower
);
3930 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE1
);
3931 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3933 rt2x00_set_field32(®s
[TX_PWR_CFG_6_IDX
],
3934 TX_PWR_CFG_6_MCS22_CH0
, txpower
);
3935 rt2x00_set_field32(®s
[TX_PWR_CFG_6_IDX
],
3936 TX_PWR_CFG_6_MCS22_CH1
, txpower
);
3937 rt2x00_set_field32(®s
[TX_PWR_CFG_6_IDX
],
3938 TX_PWR_CFG_6_MCS22_CH2
, txpower
);
3941 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE2
);
3942 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3944 rt2x00_set_field32(®s
[TX_PWR_CFG_8_IDX
],
3945 TX_PWR_CFG_8_MCS23_CH0
, txpower
);
3946 rt2x00_set_field32(®s
[TX_PWR_CFG_8_IDX
],
3947 TX_PWR_CFG_8_MCS23_CH1
, txpower
);
3948 rt2x00_set_field32(®s
[TX_PWR_CFG_8_IDX
],
3949 TX_PWR_CFG_8_MCS23_CH2
, txpower
);
3951 /* read the next four txpower values */
3952 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
3953 offset
+ 6, &eeprom
);
3956 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE0
);
3957 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3959 rt2x00_set_field32(®s
[TX_PWR_CFG_3_IDX
],
3960 TX_PWR_CFG_3_STBC0_CH0
, txpower
);
3961 rt2x00_set_field32(®s
[TX_PWR_CFG_3_IDX
],
3962 TX_PWR_CFG_3_STBC0_CH1
, txpower
);
3963 rt2x00_set_field32(®s
[TX_PWR_CFG_3_EXT_IDX
],
3964 TX_PWR_CFG_3_EXT_STBC0_CH2
, txpower
);
3967 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE1
);
3968 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3970 rt2x00_set_field32(®s
[TX_PWR_CFG_3_IDX
],
3971 TX_PWR_CFG_3_STBC2_CH0
, txpower
);
3972 rt2x00_set_field32(®s
[TX_PWR_CFG_3_IDX
],
3973 TX_PWR_CFG_3_STBC2_CH1
, txpower
);
3974 rt2x00_set_field32(®s
[TX_PWR_CFG_3_EXT_IDX
],
3975 TX_PWR_CFG_3_EXT_STBC2_CH2
, txpower
);
3978 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE2
);
3979 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3981 rt2x00_set_field32(®s
[TX_PWR_CFG_4_IDX
], TX_PWR_CFG_RATE0
, txpower
);
3982 rt2x00_set_field32(®s
[TX_PWR_CFG_4_IDX
], TX_PWR_CFG_RATE1
, txpower
);
3983 rt2x00_set_field32(®s
[TX_PWR_CFG_4_EXT_IDX
], TX_PWR_CFG_RATE0
,
3987 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE3
);
3988 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
3990 rt2x00_set_field32(®s
[TX_PWR_CFG_4_IDX
], TX_PWR_CFG_RATE2
, txpower
);
3991 rt2x00_set_field32(®s
[TX_PWR_CFG_4_IDX
], TX_PWR_CFG_RATE3
, txpower
);
3992 rt2x00_set_field32(®s
[TX_PWR_CFG_4_EXT_IDX
], TX_PWR_CFG_RATE2
,
3995 /* read the next four txpower values */
3996 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
3997 offset
+ 7, &eeprom
);
4000 txpower
= rt2x00_get_field16(eeprom
, EEPROM_TXPOWER_BYRATE_RATE0
);
4001 txpower
= rt2800_compensate_txpower(rt2x00dev
, 0, band
, power_level
,
4003 rt2x00_set_field32(®s
[TX_PWR_CFG_9_IDX
],
4004 TX_PWR_CFG_9_STBC7_CH0
, txpower
);
4005 rt2x00_set_field32(®s
[TX_PWR_CFG_9_IDX
],
4006 TX_PWR_CFG_9_STBC7_CH1
, txpower
);
4007 rt2x00_set_field32(®s
[TX_PWR_CFG_9_IDX
],
4008 TX_PWR_CFG_9_STBC7_CH2
, txpower
);
4010 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_0
, regs
[TX_PWR_CFG_0_IDX
]);
4011 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_1
, regs
[TX_PWR_CFG_1_IDX
]);
4012 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_2
, regs
[TX_PWR_CFG_2_IDX
]);
4013 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_3
, regs
[TX_PWR_CFG_3_IDX
]);
4014 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_4
, regs
[TX_PWR_CFG_4_IDX
]);
4015 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_5
, regs
[TX_PWR_CFG_5_IDX
]);
4016 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_6
, regs
[TX_PWR_CFG_6_IDX
]);
4017 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_7
, regs
[TX_PWR_CFG_7_IDX
]);
4018 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_8
, regs
[TX_PWR_CFG_8_IDX
]);
4019 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_9
, regs
[TX_PWR_CFG_9_IDX
]);
4021 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_0_EXT
,
4022 regs
[TX_PWR_CFG_0_EXT_IDX
]);
4023 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_1_EXT
,
4024 regs
[TX_PWR_CFG_1_EXT_IDX
]);
4025 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_2_EXT
,
4026 regs
[TX_PWR_CFG_2_EXT_IDX
]);
4027 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_3_EXT
,
4028 regs
[TX_PWR_CFG_3_EXT_IDX
]);
4029 rt2800_register_write(rt2x00dev
, TX_PWR_CFG_4_EXT
,
4030 regs
[TX_PWR_CFG_4_EXT_IDX
]);
4032 for (i
= 0; i
< TX_PWR_CFG_IDX_COUNT
; i
++)
4033 rt2x00_dbg(rt2x00dev
,
4034 "band:%cGHz, BW:%c0MHz, TX_PWR_CFG_%d%s = %08lx\n",
4035 (band
== IEEE80211_BAND_5GHZ
) ? '5' : '2',
4036 (test_bit(CONFIG_CHANNEL_HT40
, &rt2x00dev
->flags
)) ?
4038 (i
> TX_PWR_CFG_9_IDX
) ?
4039 (i
- TX_PWR_CFG_9_IDX
- 1) : i
,
4040 (i
> TX_PWR_CFG_9_IDX
) ? "_EXT" : "",
4041 (unsigned long) regs
[i
]);
4045 * We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and
4046 * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values,
4047 * 4 bits for each rate (tune from 0 to 15 dBm). BBP_R1 controls transmit power
4048 * for all rates, but allow to set only 4 discrete values: -12, -6, 0 and 6 dBm.
4049 * Reference per rate transmit power values are located in the EEPROM at
4050 * EEPROM_TXPOWER_BYRATE offset. We adjust them and BBP R1 settings according to
4051 * current conditions (i.e. band, bandwidth, temperature, user settings).
4053 static void rt2800_config_txpower_rt28xx(struct rt2x00_dev
*rt2x00dev
,
4054 struct ieee80211_channel
*chan
,
4060 int i
, is_rate_b
, delta
, power_ctrl
;
4061 enum ieee80211_band band
= chan
->band
;
4064 * Calculate HT40 compensation. For 40MHz we need to add or subtract
4065 * value read from EEPROM (different for 2GHz and for 5GHz).
4067 delta
= rt2800_get_txpower_bw_comp(rt2x00dev
, band
);
4070 * Calculate temperature compensation. Depends on measurement of current
4071 * TSSI (Transmitter Signal Strength Indication) we know TX power (due
4072 * to temperature or maybe other factors) is smaller or bigger than
4073 * expected. We adjust it, based on TSSI reference and boundaries values
4074 * provided in EEPROM.
4076 delta
+= rt2800_get_gain_calibration_delta(rt2x00dev
);
4079 * Decrease power according to user settings, on devices with unknown
4080 * maximum tx power. For other devices we take user power_level into
4081 * consideration on rt2800_compensate_txpower().
4083 delta
+= rt2800_get_txpower_reg_delta(rt2x00dev
, power_level
,
4087 * BBP_R1 controls TX power for all rates, it allow to set the following
4088 * gains -12, -6, 0, +6 dBm by setting values 2, 1, 0, 3 respectively.
4090 * TODO: we do not use +6 dBm option to do not increase power beyond
4091 * regulatory limit, however this could be utilized for devices with
4092 * CAPABILITY_POWER_LIMIT.
4094 * TODO: add different temperature compensation code for RT3290 & RT5390
4095 * to allow to use BBP_R1 for those chips.
4097 if (!rt2x00_rt(rt2x00dev
, RT3290
) &&
4098 !rt2x00_rt(rt2x00dev
, RT5390
)) {
4099 rt2800_bbp_read(rt2x00dev
, 1, &r1
);
4103 } else if (delta
<= -6) {
4109 rt2x00_set_field8(&r1
, BBP1_TX_POWER_CTRL
, power_ctrl
);
4110 rt2800_bbp_write(rt2x00dev
, 1, r1
);
4113 offset
= TX_PWR_CFG_0
;
4115 for (i
= 0; i
< EEPROM_TXPOWER_BYRATE_SIZE
; i
+= 2) {
4116 /* just to be safe */
4117 if (offset
> TX_PWR_CFG_4
)
4120 rt2800_register_read(rt2x00dev
, offset
, ®
);
4122 /* read the next four txpower values */
4123 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
4126 is_rate_b
= i
? 0 : 1;
4128 * TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
4129 * TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12,
4130 * TX_PWR_CFG_4: unknown
4132 txpower
= rt2x00_get_field16(eeprom
,
4133 EEPROM_TXPOWER_BYRATE_RATE0
);
4134 txpower
= rt2800_compensate_txpower(rt2x00dev
, is_rate_b
, band
,
4135 power_level
, txpower
, delta
);
4136 rt2x00_set_field32(®
, TX_PWR_CFG_RATE0
, txpower
);
4139 * TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
4140 * TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13,
4141 * TX_PWR_CFG_4: unknown
4143 txpower
= rt2x00_get_field16(eeprom
,
4144 EEPROM_TXPOWER_BYRATE_RATE1
);
4145 txpower
= rt2800_compensate_txpower(rt2x00dev
, is_rate_b
, band
,
4146 power_level
, txpower
, delta
);
4147 rt2x00_set_field32(®
, TX_PWR_CFG_RATE1
, txpower
);
4150 * TX_PWR_CFG_0: 5.5MBS, TX_PWR_CFG_1: 48MBS,
4151 * TX_PWR_CFG_2: MCS6, TX_PWR_CFG_3: MCS14,
4152 * TX_PWR_CFG_4: unknown
4154 txpower
= rt2x00_get_field16(eeprom
,
4155 EEPROM_TXPOWER_BYRATE_RATE2
);
4156 txpower
= rt2800_compensate_txpower(rt2x00dev
, is_rate_b
, band
,
4157 power_level
, txpower
, delta
);
4158 rt2x00_set_field32(®
, TX_PWR_CFG_RATE2
, txpower
);
4161 * TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
4162 * TX_PWR_CFG_2: MCS7, TX_PWR_CFG_3: MCS15,
4163 * TX_PWR_CFG_4: unknown
4165 txpower
= rt2x00_get_field16(eeprom
,
4166 EEPROM_TXPOWER_BYRATE_RATE3
);
4167 txpower
= rt2800_compensate_txpower(rt2x00dev
, is_rate_b
, band
,
4168 power_level
, txpower
, delta
);
4169 rt2x00_set_field32(®
, TX_PWR_CFG_RATE3
, txpower
);
4171 /* read the next four txpower values */
4172 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_TXPOWER_BYRATE
,
4177 * TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
4178 * TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown,
4179 * TX_PWR_CFG_4: unknown
4181 txpower
= rt2x00_get_field16(eeprom
,
4182 EEPROM_TXPOWER_BYRATE_RATE0
);
4183 txpower
= rt2800_compensate_txpower(rt2x00dev
, is_rate_b
, band
,
4184 power_level
, txpower
, delta
);
4185 rt2x00_set_field32(®
, TX_PWR_CFG_RATE4
, txpower
);
4188 * TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
4189 * TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown,
4190 * TX_PWR_CFG_4: unknown
4192 txpower
= rt2x00_get_field16(eeprom
,
4193 EEPROM_TXPOWER_BYRATE_RATE1
);
4194 txpower
= rt2800_compensate_txpower(rt2x00dev
, is_rate_b
, band
,
4195 power_level
, txpower
, delta
);
4196 rt2x00_set_field32(®
, TX_PWR_CFG_RATE5
, txpower
);
4199 * TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
4200 * TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown,
4201 * TX_PWR_CFG_4: unknown
4203 txpower
= rt2x00_get_field16(eeprom
,
4204 EEPROM_TXPOWER_BYRATE_RATE2
);
4205 txpower
= rt2800_compensate_txpower(rt2x00dev
, is_rate_b
, band
,
4206 power_level
, txpower
, delta
);
4207 rt2x00_set_field32(®
, TX_PWR_CFG_RATE6
, txpower
);
4210 * TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
4211 * TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown,
4212 * TX_PWR_CFG_4: unknown
4214 txpower
= rt2x00_get_field16(eeprom
,
4215 EEPROM_TXPOWER_BYRATE_RATE3
);
4216 txpower
= rt2800_compensate_txpower(rt2x00dev
, is_rate_b
, band
,
4217 power_level
, txpower
, delta
);
4218 rt2x00_set_field32(®
, TX_PWR_CFG_RATE7
, txpower
);
4220 rt2800_register_write(rt2x00dev
, offset
, reg
);
4222 /* next TX_PWR_CFG register */
4227 static void rt2800_config_txpower(struct rt2x00_dev
*rt2x00dev
,
4228 struct ieee80211_channel
*chan
,
4231 if (rt2x00_rt(rt2x00dev
, RT3593
))
4232 rt2800_config_txpower_rt3593(rt2x00dev
, chan
, power_level
);
4234 rt2800_config_txpower_rt28xx(rt2x00dev
, chan
, power_level
);
4237 void rt2800_gain_calibration(struct rt2x00_dev
*rt2x00dev
)
4239 rt2800_config_txpower(rt2x00dev
, rt2x00dev
->hw
->conf
.chandef
.chan
,
4240 rt2x00dev
->tx_power
);
4242 EXPORT_SYMBOL_GPL(rt2800_gain_calibration
);
4244 void rt2800_vco_calibration(struct rt2x00_dev
*rt2x00dev
)
4250 * A voltage-controlled oscillator(VCO) is an electronic oscillator
4251 * designed to be controlled in oscillation frequency by a voltage
4252 * input. Maybe the temperature will affect the frequency of
4253 * oscillation to be shifted. The VCO calibration will be called
4254 * periodically to adjust the frequency to be precision.
4257 rt2800_register_read(rt2x00dev
, TX_PIN_CFG
, &tx_pin
);
4258 tx_pin
&= TX_PIN_CFG_PA_PE_DISABLE
;
4259 rt2800_register_write(rt2x00dev
, TX_PIN_CFG
, tx_pin
);
4261 switch (rt2x00dev
->chip
.rf
) {
4268 rt2800_rfcsr_read(rt2x00dev
, 7, &rfcsr
);
4269 rt2x00_set_field8(&rfcsr
, RFCSR7_RF_TUNING
, 1);
4270 rt2800_rfcsr_write(rt2x00dev
, 7, rfcsr
);
4280 rt2800_rfcsr_read(rt2x00dev
, 3, &rfcsr
);
4281 rt2x00_set_field8(&rfcsr
, RFCSR3_VCOCAL_EN
, 1);
4282 rt2800_rfcsr_write(rt2x00dev
, 3, rfcsr
);
4290 rt2800_register_read(rt2x00dev
, TX_PIN_CFG
, &tx_pin
);
4291 if (rt2x00dev
->rf_channel
<= 14) {
4292 switch (rt2x00dev
->default_ant
.tx_chain_num
) {
4294 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_G2_EN
, 1);
4297 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_G1_EN
, 1);
4301 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_G0_EN
, 1);
4305 switch (rt2x00dev
->default_ant
.tx_chain_num
) {
4307 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_A2_EN
, 1);
4310 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_A1_EN
, 1);
4314 rt2x00_set_field32(&tx_pin
, TX_PIN_CFG_PA_PE_A0_EN
, 1);
4318 rt2800_register_write(rt2x00dev
, TX_PIN_CFG
, tx_pin
);
4321 EXPORT_SYMBOL_GPL(rt2800_vco_calibration
);
4323 static void rt2800_config_retry_limit(struct rt2x00_dev
*rt2x00dev
,
4324 struct rt2x00lib_conf
*libconf
)
4328 rt2800_register_read(rt2x00dev
, TX_RTY_CFG
, ®
);
4329 rt2x00_set_field32(®
, TX_RTY_CFG_SHORT_RTY_LIMIT
,
4330 libconf
->conf
->short_frame_max_tx_count
);
4331 rt2x00_set_field32(®
, TX_RTY_CFG_LONG_RTY_LIMIT
,
4332 libconf
->conf
->long_frame_max_tx_count
);
4333 rt2800_register_write(rt2x00dev
, TX_RTY_CFG
, reg
);
4336 static void rt2800_config_ps(struct rt2x00_dev
*rt2x00dev
,
4337 struct rt2x00lib_conf
*libconf
)
4339 enum dev_state state
=
4340 (libconf
->conf
->flags
& IEEE80211_CONF_PS
) ?
4341 STATE_SLEEP
: STATE_AWAKE
;
4344 if (state
== STATE_SLEEP
) {
4345 rt2800_register_write(rt2x00dev
, AUTOWAKEUP_CFG
, 0);
4347 rt2800_register_read(rt2x00dev
, AUTOWAKEUP_CFG
, ®
);
4348 rt2x00_set_field32(®
, AUTOWAKEUP_CFG_AUTO_LEAD_TIME
, 5);
4349 rt2x00_set_field32(®
, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE
,
4350 libconf
->conf
->listen_interval
- 1);
4351 rt2x00_set_field32(®
, AUTOWAKEUP_CFG_AUTOWAKE
, 1);
4352 rt2800_register_write(rt2x00dev
, AUTOWAKEUP_CFG
, reg
);
4354 rt2x00dev
->ops
->lib
->set_device_state(rt2x00dev
, state
);
4356 rt2800_register_read(rt2x00dev
, AUTOWAKEUP_CFG
, ®
);
4357 rt2x00_set_field32(®
, AUTOWAKEUP_CFG_AUTO_LEAD_TIME
, 0);
4358 rt2x00_set_field32(®
, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE
, 0);
4359 rt2x00_set_field32(®
, AUTOWAKEUP_CFG_AUTOWAKE
, 0);
4360 rt2800_register_write(rt2x00dev
, AUTOWAKEUP_CFG
, reg
);
4362 rt2x00dev
->ops
->lib
->set_device_state(rt2x00dev
, state
);
4366 void rt2800_config(struct rt2x00_dev
*rt2x00dev
,
4367 struct rt2x00lib_conf
*libconf
,
4368 const unsigned int flags
)
4370 /* Always recalculate LNA gain before changing configuration */
4371 rt2800_config_lna_gain(rt2x00dev
, libconf
);
4373 if (flags
& IEEE80211_CONF_CHANGE_CHANNEL
) {
4374 rt2800_config_channel(rt2x00dev
, libconf
->conf
,
4375 &libconf
->rf
, &libconf
->channel
);
4376 rt2800_config_txpower(rt2x00dev
, libconf
->conf
->chandef
.chan
,
4377 libconf
->conf
->power_level
);
4379 if (flags
& IEEE80211_CONF_CHANGE_POWER
)
4380 rt2800_config_txpower(rt2x00dev
, libconf
->conf
->chandef
.chan
,
4381 libconf
->conf
->power_level
);
4382 if (flags
& IEEE80211_CONF_CHANGE_RETRY_LIMITS
)
4383 rt2800_config_retry_limit(rt2x00dev
, libconf
);
4384 if (flags
& IEEE80211_CONF_CHANGE_PS
)
4385 rt2800_config_ps(rt2x00dev
, libconf
);
4387 EXPORT_SYMBOL_GPL(rt2800_config
);
4392 void rt2800_link_stats(struct rt2x00_dev
*rt2x00dev
, struct link_qual
*qual
)
4397 * Update FCS error count from register.
4399 rt2800_register_read(rt2x00dev
, RX_STA_CNT0
, ®
);
4400 qual
->rx_failed
= rt2x00_get_field32(reg
, RX_STA_CNT0_CRC_ERR
);
4402 EXPORT_SYMBOL_GPL(rt2800_link_stats
);
4404 static u8
rt2800_get_default_vgc(struct rt2x00_dev
*rt2x00dev
)
4408 if (rt2x00dev
->curr_band
== IEEE80211_BAND_2GHZ
) {
4409 if (rt2x00_rt(rt2x00dev
, RT3070
) ||
4410 rt2x00_rt(rt2x00dev
, RT3071
) ||
4411 rt2x00_rt(rt2x00dev
, RT3090
) ||
4412 rt2x00_rt(rt2x00dev
, RT3290
) ||
4413 rt2x00_rt(rt2x00dev
, RT3390
) ||
4414 rt2x00_rt(rt2x00dev
, RT3572
) ||
4415 rt2x00_rt(rt2x00dev
, RT3593
) ||
4416 rt2x00_rt(rt2x00dev
, RT5390
) ||
4417 rt2x00_rt(rt2x00dev
, RT5392
) ||
4418 rt2x00_rt(rt2x00dev
, RT5592
))
4419 vgc
= 0x1c + (2 * rt2x00dev
->lna_gain
);
4421 vgc
= 0x2e + rt2x00dev
->lna_gain
;
4422 } else { /* 5GHZ band */
4423 if (rt2x00_rt(rt2x00dev
, RT3593
))
4424 vgc
= 0x20 + (rt2x00dev
->lna_gain
* 5) / 3;
4425 else if (rt2x00_rt(rt2x00dev
, RT5592
))
4426 vgc
= 0x24 + (2 * rt2x00dev
->lna_gain
);
4428 if (!test_bit(CONFIG_CHANNEL_HT40
, &rt2x00dev
->flags
))
4429 vgc
= 0x32 + (rt2x00dev
->lna_gain
* 5) / 3;
4431 vgc
= 0x3a + (rt2x00dev
->lna_gain
* 5) / 3;
4438 static inline void rt2800_set_vgc(struct rt2x00_dev
*rt2x00dev
,
4439 struct link_qual
*qual
, u8 vgc_level
)
4441 if (qual
->vgc_level
!= vgc_level
) {
4442 if (rt2x00_rt(rt2x00dev
, RT3572
) ||
4443 rt2x00_rt(rt2x00dev
, RT3593
)) {
4444 rt2800_bbp_write_with_rx_chain(rt2x00dev
, 66,
4446 } else if (rt2x00_rt(rt2x00dev
, RT5592
)) {
4447 rt2800_bbp_write(rt2x00dev
, 83, qual
->rssi
> -65 ? 0x4a : 0x7a);
4448 rt2800_bbp_write_with_rx_chain(rt2x00dev
, 66, vgc_level
);
4450 rt2800_bbp_write(rt2x00dev
, 66, vgc_level
);
4453 qual
->vgc_level
= vgc_level
;
4454 qual
->vgc_level_reg
= vgc_level
;
4458 void rt2800_reset_tuner(struct rt2x00_dev
*rt2x00dev
, struct link_qual
*qual
)
4460 rt2800_set_vgc(rt2x00dev
, qual
, rt2800_get_default_vgc(rt2x00dev
));
4462 EXPORT_SYMBOL_GPL(rt2800_reset_tuner
);
4464 void rt2800_link_tuner(struct rt2x00_dev
*rt2x00dev
, struct link_qual
*qual
,
4469 if (rt2x00_rt_rev(rt2x00dev
, RT2860
, REV_RT2860C
))
4472 /* When RSSI is better than a certain threshold, increase VGC
4473 * with a chip specific value in order to improve the balance
4474 * between sensibility and noise isolation.
4477 vgc
= rt2800_get_default_vgc(rt2x00dev
);
4479 switch (rt2x00dev
->chip
.rt
) {
4482 if (qual
->rssi
> -65) {
4483 if (rt2x00dev
->curr_band
== IEEE80211_BAND_2GHZ
)
4491 if (qual
->rssi
> -65)
4496 if (qual
->rssi
> -80)
4501 rt2800_set_vgc(rt2x00dev
, qual
, vgc
);
4503 EXPORT_SYMBOL_GPL(rt2800_link_tuner
);
4506 * Initialization functions.
4508 static int rt2800_init_registers(struct rt2x00_dev
*rt2x00dev
)
4515 rt2800_disable_wpdma(rt2x00dev
);
4517 ret
= rt2800_drv_init_registers(rt2x00dev
);
4521 rt2800_register_read(rt2x00dev
, BCN_OFFSET0
, ®
);
4522 rt2x00_set_field32(®
, BCN_OFFSET0_BCN0
,
4523 rt2800_get_beacon_offset(rt2x00dev
, 0));
4524 rt2x00_set_field32(®
, BCN_OFFSET0_BCN1
,
4525 rt2800_get_beacon_offset(rt2x00dev
, 1));
4526 rt2x00_set_field32(®
, BCN_OFFSET0_BCN2
,
4527 rt2800_get_beacon_offset(rt2x00dev
, 2));
4528 rt2x00_set_field32(®
, BCN_OFFSET0_BCN3
,
4529 rt2800_get_beacon_offset(rt2x00dev
, 3));
4530 rt2800_register_write(rt2x00dev
, BCN_OFFSET0
, reg
);
4532 rt2800_register_read(rt2x00dev
, BCN_OFFSET1
, ®
);
4533 rt2x00_set_field32(®
, BCN_OFFSET1_BCN4
,
4534 rt2800_get_beacon_offset(rt2x00dev
, 4));
4535 rt2x00_set_field32(®
, BCN_OFFSET1_BCN5
,
4536 rt2800_get_beacon_offset(rt2x00dev
, 5));
4537 rt2x00_set_field32(®
, BCN_OFFSET1_BCN6
,
4538 rt2800_get_beacon_offset(rt2x00dev
, 6));
4539 rt2x00_set_field32(®
, BCN_OFFSET1_BCN7
,
4540 rt2800_get_beacon_offset(rt2x00dev
, 7));
4541 rt2800_register_write(rt2x00dev
, BCN_OFFSET1
, reg
);
4543 rt2800_register_write(rt2x00dev
, LEGACY_BASIC_RATE
, 0x0000013f);
4544 rt2800_register_write(rt2x00dev
, HT_BASIC_RATE
, 0x00008003);
4546 rt2800_register_write(rt2x00dev
, MAC_SYS_CTRL
, 0x00000000);
4548 rt2800_register_read(rt2x00dev
, BCN_TIME_CFG
, ®
);
4549 rt2x00_set_field32(®
, BCN_TIME_CFG_BEACON_INTERVAL
, 1600);
4550 rt2x00_set_field32(®
, BCN_TIME_CFG_TSF_TICKING
, 0);
4551 rt2x00_set_field32(®
, BCN_TIME_CFG_TSF_SYNC
, 0);
4552 rt2x00_set_field32(®
, BCN_TIME_CFG_TBTT_ENABLE
, 0);
4553 rt2x00_set_field32(®
, BCN_TIME_CFG_BEACON_GEN
, 0);
4554 rt2x00_set_field32(®
, BCN_TIME_CFG_TX_TIME_COMPENSATE
, 0);
4555 rt2800_register_write(rt2x00dev
, BCN_TIME_CFG
, reg
);
4557 rt2800_config_filter(rt2x00dev
, FIF_ALLMULTI
);
4559 rt2800_register_read(rt2x00dev
, BKOFF_SLOT_CFG
, ®
);
4560 rt2x00_set_field32(®
, BKOFF_SLOT_CFG_SLOT_TIME
, 9);
4561 rt2x00_set_field32(®
, BKOFF_SLOT_CFG_CC_DELAY_TIME
, 2);
4562 rt2800_register_write(rt2x00dev
, BKOFF_SLOT_CFG
, reg
);
4564 if (rt2x00_rt(rt2x00dev
, RT3290
)) {
4565 rt2800_register_read(rt2x00dev
, WLAN_FUN_CTRL
, ®
);
4566 if (rt2x00_get_field32(reg
, WLAN_EN
) == 1) {
4567 rt2x00_set_field32(®
, PCIE_APP0_CLK_REQ
, 1);
4568 rt2800_register_write(rt2x00dev
, WLAN_FUN_CTRL
, reg
);
4571 rt2800_register_read(rt2x00dev
, CMB_CTRL
, ®
);
4572 if (!(rt2x00_get_field32(reg
, LDO0_EN
) == 1)) {
4573 rt2x00_set_field32(®
, LDO0_EN
, 1);
4574 rt2x00_set_field32(®
, LDO_BGSEL
, 3);
4575 rt2800_register_write(rt2x00dev
, CMB_CTRL
, reg
);
4578 rt2800_register_read(rt2x00dev
, OSC_CTRL
, ®
);
4579 rt2x00_set_field32(®
, OSC_ROSC_EN
, 1);
4580 rt2x00_set_field32(®
, OSC_CAL_REQ
, 1);
4581 rt2x00_set_field32(®
, OSC_REF_CYCLE
, 0x27);
4582 rt2800_register_write(rt2x00dev
, OSC_CTRL
, reg
);
4584 rt2800_register_read(rt2x00dev
, COEX_CFG0
, ®
);
4585 rt2x00_set_field32(®
, COEX_CFG_ANT
, 0x5e);
4586 rt2800_register_write(rt2x00dev
, COEX_CFG0
, reg
);
4588 rt2800_register_read(rt2x00dev
, COEX_CFG2
, ®
);
4589 rt2x00_set_field32(®
, BT_COEX_CFG1
, 0x00);
4590 rt2x00_set_field32(®
, BT_COEX_CFG0
, 0x17);
4591 rt2x00_set_field32(®
, WL_COEX_CFG1
, 0x93);
4592 rt2x00_set_field32(®
, WL_COEX_CFG0
, 0x7f);
4593 rt2800_register_write(rt2x00dev
, COEX_CFG2
, reg
);
4595 rt2800_register_read(rt2x00dev
, PLL_CTRL
, ®
);
4596 rt2x00_set_field32(®
, PLL_CONTROL
, 1);
4597 rt2800_register_write(rt2x00dev
, PLL_CTRL
, reg
);
4600 if (rt2x00_rt(rt2x00dev
, RT3071
) ||
4601 rt2x00_rt(rt2x00dev
, RT3090
) ||
4602 rt2x00_rt(rt2x00dev
, RT3290
) ||
4603 rt2x00_rt(rt2x00dev
, RT3390
)) {
4605 if (rt2x00_rt(rt2x00dev
, RT3290
))
4606 rt2800_register_write(rt2x00dev
, TX_SW_CFG0
,
4609 rt2800_register_write(rt2x00dev
, TX_SW_CFG0
,
4612 rt2800_register_write(rt2x00dev
, TX_SW_CFG1
, 0x00000000);
4613 if (rt2x00_rt_rev_lt(rt2x00dev
, RT3071
, REV_RT3071E
) ||
4614 rt2x00_rt_rev_lt(rt2x00dev
, RT3090
, REV_RT3090E
) ||
4615 rt2x00_rt_rev_lt(rt2x00dev
, RT3390
, REV_RT3390E
)) {
4616 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF1
,
4618 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF1_DAC_TEST
))
4619 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
,
4622 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
,
4625 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
, 0x00000000);
4627 } else if (rt2x00_rt(rt2x00dev
, RT3070
)) {
4628 rt2800_register_write(rt2x00dev
, TX_SW_CFG0
, 0x00000400);
4630 if (rt2x00_rt_rev_lt(rt2x00dev
, RT3070
, REV_RT3070F
)) {
4631 rt2800_register_write(rt2x00dev
, TX_SW_CFG1
, 0x00000000);
4632 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
, 0x0000002c);
4634 rt2800_register_write(rt2x00dev
, TX_SW_CFG1
, 0x00080606);
4635 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
, 0x00000000);
4637 } else if (rt2800_is_305x_soc(rt2x00dev
)) {
4638 rt2800_register_write(rt2x00dev
, TX_SW_CFG0
, 0x00000400);
4639 rt2800_register_write(rt2x00dev
, TX_SW_CFG1
, 0x00000000);
4640 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
, 0x00000030);
4641 } else if (rt2x00_rt(rt2x00dev
, RT3352
)) {
4642 rt2800_register_write(rt2x00dev
, TX_SW_CFG0
, 0x00000402);
4643 rt2800_register_write(rt2x00dev
, TX_SW_CFG1
, 0x00080606);
4644 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
, 0x00000000);
4645 } else if (rt2x00_rt(rt2x00dev
, RT3572
)) {
4646 rt2800_register_write(rt2x00dev
, TX_SW_CFG0
, 0x00000400);
4647 rt2800_register_write(rt2x00dev
, TX_SW_CFG1
, 0x00080606);
4648 } else if (rt2x00_rt(rt2x00dev
, RT3593
)) {
4649 rt2800_register_write(rt2x00dev
, TX_SW_CFG0
, 0x00000402);
4650 rt2800_register_write(rt2x00dev
, TX_SW_CFG1
, 0x00000000);
4651 if (rt2x00_rt_rev_lt(rt2x00dev
, RT3593
, REV_RT3593E
)) {
4652 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF1
,
4654 if (rt2x00_get_field16(eeprom
,
4655 EEPROM_NIC_CONF1_DAC_TEST
))
4656 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
,
4659 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
,
4662 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
,
4665 } else if (rt2x00_rt(rt2x00dev
, RT5390
) ||
4666 rt2x00_rt(rt2x00dev
, RT5392
) ||
4667 rt2x00_rt(rt2x00dev
, RT5592
)) {
4668 rt2800_register_write(rt2x00dev
, TX_SW_CFG0
, 0x00000404);
4669 rt2800_register_write(rt2x00dev
, TX_SW_CFG1
, 0x00080606);
4670 rt2800_register_write(rt2x00dev
, TX_SW_CFG2
, 0x00000000);
4672 rt2800_register_write(rt2x00dev
, TX_SW_CFG0
, 0x00000000);
4673 rt2800_register_write(rt2x00dev
, TX_SW_CFG1
, 0x00080606);
4676 rt2800_register_read(rt2x00dev
, TX_LINK_CFG
, ®
);
4677 rt2x00_set_field32(®
, TX_LINK_CFG_REMOTE_MFB_LIFETIME
, 32);
4678 rt2x00_set_field32(®
, TX_LINK_CFG_MFB_ENABLE
, 0);
4679 rt2x00_set_field32(®
, TX_LINK_CFG_REMOTE_UMFS_ENABLE
, 0);
4680 rt2x00_set_field32(®
, TX_LINK_CFG_TX_MRQ_EN
, 0);
4681 rt2x00_set_field32(®
, TX_LINK_CFG_TX_RDG_EN
, 0);
4682 rt2x00_set_field32(®
, TX_LINK_CFG_TX_CF_ACK_EN
, 1);
4683 rt2x00_set_field32(®
, TX_LINK_CFG_REMOTE_MFB
, 0);
4684 rt2x00_set_field32(®
, TX_LINK_CFG_REMOTE_MFS
, 0);
4685 rt2800_register_write(rt2x00dev
, TX_LINK_CFG
, reg
);
4687 rt2800_register_read(rt2x00dev
, TX_TIMEOUT_CFG
, ®
);
4688 rt2x00_set_field32(®
, TX_TIMEOUT_CFG_MPDU_LIFETIME
, 9);
4689 rt2x00_set_field32(®
, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT
, 32);
4690 rt2x00_set_field32(®
, TX_TIMEOUT_CFG_TX_OP_TIMEOUT
, 10);
4691 rt2800_register_write(rt2x00dev
, TX_TIMEOUT_CFG
, reg
);
4693 rt2800_register_read(rt2x00dev
, MAX_LEN_CFG
, ®
);
4694 rt2x00_set_field32(®
, MAX_LEN_CFG_MAX_MPDU
, AGGREGATION_SIZE
);
4695 if (rt2x00_rt_rev_gte(rt2x00dev
, RT2872
, REV_RT2872E
) ||
4696 rt2x00_rt(rt2x00dev
, RT2883
) ||
4697 rt2x00_rt_rev_lt(rt2x00dev
, RT3070
, REV_RT3070E
))
4698 rt2x00_set_field32(®
, MAX_LEN_CFG_MAX_PSDU
, 2);
4700 rt2x00_set_field32(®
, MAX_LEN_CFG_MAX_PSDU
, 1);
4701 rt2x00_set_field32(®
, MAX_LEN_CFG_MIN_PSDU
, 0);
4702 rt2x00_set_field32(®
, MAX_LEN_CFG_MIN_MPDU
, 0);
4703 rt2800_register_write(rt2x00dev
, MAX_LEN_CFG
, reg
);
4705 rt2800_register_read(rt2x00dev
, LED_CFG
, ®
);
4706 rt2x00_set_field32(®
, LED_CFG_ON_PERIOD
, 70);
4707 rt2x00_set_field32(®
, LED_CFG_OFF_PERIOD
, 30);
4708 rt2x00_set_field32(®
, LED_CFG_SLOW_BLINK_PERIOD
, 3);
4709 rt2x00_set_field32(®
, LED_CFG_R_LED_MODE
, 3);
4710 rt2x00_set_field32(®
, LED_CFG_G_LED_MODE
, 3);
4711 rt2x00_set_field32(®
, LED_CFG_Y_LED_MODE
, 3);
4712 rt2x00_set_field32(®
, LED_CFG_LED_POLAR
, 1);
4713 rt2800_register_write(rt2x00dev
, LED_CFG
, reg
);
4715 rt2800_register_write(rt2x00dev
, PBF_MAX_PCNT
, 0x1f3fbf9f);
4717 rt2800_register_read(rt2x00dev
, TX_RTY_CFG
, ®
);
4718 rt2x00_set_field32(®
, TX_RTY_CFG_SHORT_RTY_LIMIT
, 15);
4719 rt2x00_set_field32(®
, TX_RTY_CFG_LONG_RTY_LIMIT
, 31);
4720 rt2x00_set_field32(®
, TX_RTY_CFG_LONG_RTY_THRE
, 2000);
4721 rt2x00_set_field32(®
, TX_RTY_CFG_NON_AGG_RTY_MODE
, 0);
4722 rt2x00_set_field32(®
, TX_RTY_CFG_AGG_RTY_MODE
, 0);
4723 rt2x00_set_field32(®
, TX_RTY_CFG_TX_AUTO_FB_ENABLE
, 1);
4724 rt2800_register_write(rt2x00dev
, TX_RTY_CFG
, reg
);
4726 rt2800_register_read(rt2x00dev
, AUTO_RSP_CFG
, ®
);
4727 rt2x00_set_field32(®
, AUTO_RSP_CFG_AUTORESPONDER
, 1);
4728 rt2x00_set_field32(®
, AUTO_RSP_CFG_BAC_ACK_POLICY
, 1);
4729 rt2x00_set_field32(®
, AUTO_RSP_CFG_CTS_40_MMODE
, 0);
4730 rt2x00_set_field32(®
, AUTO_RSP_CFG_CTS_40_MREF
, 0);
4731 rt2x00_set_field32(®
, AUTO_RSP_CFG_AR_PREAMBLE
, 1);
4732 rt2x00_set_field32(®
, AUTO_RSP_CFG_DUAL_CTS_EN
, 0);
4733 rt2x00_set_field32(®
, AUTO_RSP_CFG_ACK_CTS_PSM_BIT
, 0);
4734 rt2800_register_write(rt2x00dev
, AUTO_RSP_CFG
, reg
);
4736 rt2800_register_read(rt2x00dev
, CCK_PROT_CFG
, ®
);
4737 rt2x00_set_field32(®
, CCK_PROT_CFG_PROTECT_RATE
, 3);
4738 rt2x00_set_field32(®
, CCK_PROT_CFG_PROTECT_CTRL
, 0);
4739 rt2x00_set_field32(®
, CCK_PROT_CFG_PROTECT_NAV_SHORT
, 1);
4740 rt2x00_set_field32(®
, CCK_PROT_CFG_TX_OP_ALLOW_CCK
, 1);
4741 rt2x00_set_field32(®
, CCK_PROT_CFG_TX_OP_ALLOW_OFDM
, 1);
4742 rt2x00_set_field32(®
, CCK_PROT_CFG_TX_OP_ALLOW_MM20
, 1);
4743 rt2x00_set_field32(®
, CCK_PROT_CFG_TX_OP_ALLOW_MM40
, 0);
4744 rt2x00_set_field32(®
, CCK_PROT_CFG_TX_OP_ALLOW_GF20
, 1);
4745 rt2x00_set_field32(®
, CCK_PROT_CFG_TX_OP_ALLOW_GF40
, 0);
4746 rt2x00_set_field32(®
, CCK_PROT_CFG_RTS_TH_EN
, 1);
4747 rt2800_register_write(rt2x00dev
, CCK_PROT_CFG
, reg
);
4749 rt2800_register_read(rt2x00dev
, OFDM_PROT_CFG
, ®
);
4750 rt2x00_set_field32(®
, OFDM_PROT_CFG_PROTECT_RATE
, 3);
4751 rt2x00_set_field32(®
, OFDM_PROT_CFG_PROTECT_CTRL
, 0);
4752 rt2x00_set_field32(®
, OFDM_PROT_CFG_PROTECT_NAV_SHORT
, 1);
4753 rt2x00_set_field32(®
, OFDM_PROT_CFG_TX_OP_ALLOW_CCK
, 1);
4754 rt2x00_set_field32(®
, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM
, 1);
4755 rt2x00_set_field32(®
, OFDM_PROT_CFG_TX_OP_ALLOW_MM20
, 1);
4756 rt2x00_set_field32(®
, OFDM_PROT_CFG_TX_OP_ALLOW_MM40
, 0);
4757 rt2x00_set_field32(®
, OFDM_PROT_CFG_TX_OP_ALLOW_GF20
, 1);
4758 rt2x00_set_field32(®
, OFDM_PROT_CFG_TX_OP_ALLOW_GF40
, 0);
4759 rt2x00_set_field32(®
, OFDM_PROT_CFG_RTS_TH_EN
, 1);
4760 rt2800_register_write(rt2x00dev
, OFDM_PROT_CFG
, reg
);
4762 rt2800_register_read(rt2x00dev
, MM20_PROT_CFG
, ®
);
4763 rt2x00_set_field32(®
, MM20_PROT_CFG_PROTECT_RATE
, 0x4004);
4764 rt2x00_set_field32(®
, MM20_PROT_CFG_PROTECT_CTRL
, 0);
4765 rt2x00_set_field32(®
, MM20_PROT_CFG_PROTECT_NAV_SHORT
, 1);
4766 rt2x00_set_field32(®
, MM20_PROT_CFG_TX_OP_ALLOW_CCK
, 1);
4767 rt2x00_set_field32(®
, MM20_PROT_CFG_TX_OP_ALLOW_OFDM
, 1);
4768 rt2x00_set_field32(®
, MM20_PROT_CFG_TX_OP_ALLOW_MM20
, 1);
4769 rt2x00_set_field32(®
, MM20_PROT_CFG_TX_OP_ALLOW_MM40
, 0);
4770 rt2x00_set_field32(®
, MM20_PROT_CFG_TX_OP_ALLOW_GF20
, 1);
4771 rt2x00_set_field32(®
, MM20_PROT_CFG_TX_OP_ALLOW_GF40
, 0);
4772 rt2x00_set_field32(®
, MM20_PROT_CFG_RTS_TH_EN
, 0);
4773 rt2800_register_write(rt2x00dev
, MM20_PROT_CFG
, reg
);
4775 rt2800_register_read(rt2x00dev
, MM40_PROT_CFG
, ®
);
4776 rt2x00_set_field32(®
, MM40_PROT_CFG_PROTECT_RATE
, 0x4084);
4777 rt2x00_set_field32(®
, MM40_PROT_CFG_PROTECT_CTRL
, 0);
4778 rt2x00_set_field32(®
, MM40_PROT_CFG_PROTECT_NAV_SHORT
, 1);
4779 rt2x00_set_field32(®
, MM40_PROT_CFG_TX_OP_ALLOW_CCK
, 1);
4780 rt2x00_set_field32(®
, MM40_PROT_CFG_TX_OP_ALLOW_OFDM
, 1);
4781 rt2x00_set_field32(®
, MM40_PROT_CFG_TX_OP_ALLOW_MM20
, 1);
4782 rt2x00_set_field32(®
, MM40_PROT_CFG_TX_OP_ALLOW_MM40
, 1);
4783 rt2x00_set_field32(®
, MM40_PROT_CFG_TX_OP_ALLOW_GF20
, 1);
4784 rt2x00_set_field32(®
, MM40_PROT_CFG_TX_OP_ALLOW_GF40
, 1);
4785 rt2x00_set_field32(®
, MM40_PROT_CFG_RTS_TH_EN
, 0);
4786 rt2800_register_write(rt2x00dev
, MM40_PROT_CFG
, reg
);
4788 rt2800_register_read(rt2x00dev
, GF20_PROT_CFG
, ®
);
4789 rt2x00_set_field32(®
, GF20_PROT_CFG_PROTECT_RATE
, 0x4004);
4790 rt2x00_set_field32(®
, GF20_PROT_CFG_PROTECT_CTRL
, 0);
4791 rt2x00_set_field32(®
, GF20_PROT_CFG_PROTECT_NAV_SHORT
, 1);
4792 rt2x00_set_field32(®
, GF20_PROT_CFG_TX_OP_ALLOW_CCK
, 1);
4793 rt2x00_set_field32(®
, GF20_PROT_CFG_TX_OP_ALLOW_OFDM
, 1);
4794 rt2x00_set_field32(®
, GF20_PROT_CFG_TX_OP_ALLOW_MM20
, 1);
4795 rt2x00_set_field32(®
, GF20_PROT_CFG_TX_OP_ALLOW_MM40
, 0);
4796 rt2x00_set_field32(®
, GF20_PROT_CFG_TX_OP_ALLOW_GF20
, 1);
4797 rt2x00_set_field32(®
, GF20_PROT_CFG_TX_OP_ALLOW_GF40
, 0);
4798 rt2x00_set_field32(®
, GF20_PROT_CFG_RTS_TH_EN
, 0);
4799 rt2800_register_write(rt2x00dev
, GF20_PROT_CFG
, reg
);
4801 rt2800_register_read(rt2x00dev
, GF40_PROT_CFG
, ®
);
4802 rt2x00_set_field32(®
, GF40_PROT_CFG_PROTECT_RATE
, 0x4084);
4803 rt2x00_set_field32(®
, GF40_PROT_CFG_PROTECT_CTRL
, 0);
4804 rt2x00_set_field32(®
, GF40_PROT_CFG_PROTECT_NAV_SHORT
, 1);
4805 rt2x00_set_field32(®
, GF40_PROT_CFG_TX_OP_ALLOW_CCK
, 1);
4806 rt2x00_set_field32(®
, GF40_PROT_CFG_TX_OP_ALLOW_OFDM
, 1);
4807 rt2x00_set_field32(®
, GF40_PROT_CFG_TX_OP_ALLOW_MM20
, 1);
4808 rt2x00_set_field32(®
, GF40_PROT_CFG_TX_OP_ALLOW_MM40
, 1);
4809 rt2x00_set_field32(®
, GF40_PROT_CFG_TX_OP_ALLOW_GF20
, 1);
4810 rt2x00_set_field32(®
, GF40_PROT_CFG_TX_OP_ALLOW_GF40
, 1);
4811 rt2x00_set_field32(®
, GF40_PROT_CFG_RTS_TH_EN
, 0);
4812 rt2800_register_write(rt2x00dev
, GF40_PROT_CFG
, reg
);
4814 if (rt2x00_is_usb(rt2x00dev
)) {
4815 rt2800_register_write(rt2x00dev
, PBF_CFG
, 0xf40006);
4817 rt2800_register_read(rt2x00dev
, WPDMA_GLO_CFG
, ®
);
4818 rt2x00_set_field32(®
, WPDMA_GLO_CFG_ENABLE_TX_DMA
, 0);
4819 rt2x00_set_field32(®
, WPDMA_GLO_CFG_TX_DMA_BUSY
, 0);
4820 rt2x00_set_field32(®
, WPDMA_GLO_CFG_ENABLE_RX_DMA
, 0);
4821 rt2x00_set_field32(®
, WPDMA_GLO_CFG_RX_DMA_BUSY
, 0);
4822 rt2x00_set_field32(®
, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE
, 3);
4823 rt2x00_set_field32(®
, WPDMA_GLO_CFG_TX_WRITEBACK_DONE
, 0);
4824 rt2x00_set_field32(®
, WPDMA_GLO_CFG_BIG_ENDIAN
, 0);
4825 rt2x00_set_field32(®
, WPDMA_GLO_CFG_RX_HDR_SCATTER
, 0);
4826 rt2x00_set_field32(®
, WPDMA_GLO_CFG_HDR_SEG_LEN
, 0);
4827 rt2800_register_write(rt2x00dev
, WPDMA_GLO_CFG
, reg
);
4831 * The legacy driver also sets TXOP_CTRL_CFG_RESERVED_TRUN_EN to 1
4832 * although it is reserved.
4834 rt2800_register_read(rt2x00dev
, TXOP_CTRL_CFG
, ®
);
4835 rt2x00_set_field32(®
, TXOP_CTRL_CFG_TIMEOUT_TRUN_EN
, 1);
4836 rt2x00_set_field32(®
, TXOP_CTRL_CFG_AC_TRUN_EN
, 1);
4837 rt2x00_set_field32(®
, TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN
, 1);
4838 rt2x00_set_field32(®
, TXOP_CTRL_CFG_USER_MODE_TRUN_EN
, 1);
4839 rt2x00_set_field32(®
, TXOP_CTRL_CFG_MIMO_PS_TRUN_EN
, 1);
4840 rt2x00_set_field32(®
, TXOP_CTRL_CFG_RESERVED_TRUN_EN
, 1);
4841 rt2x00_set_field32(®
, TXOP_CTRL_CFG_LSIG_TXOP_EN
, 0);
4842 rt2x00_set_field32(®
, TXOP_CTRL_CFG_EXT_CCA_EN
, 0);
4843 rt2x00_set_field32(®
, TXOP_CTRL_CFG_EXT_CCA_DLY
, 88);
4844 rt2x00_set_field32(®
, TXOP_CTRL_CFG_EXT_CWMIN
, 0);
4845 rt2800_register_write(rt2x00dev
, TXOP_CTRL_CFG
, reg
);
4847 reg
= rt2x00_rt(rt2x00dev
, RT5592
) ? 0x00000082 : 0x00000002;
4848 rt2800_register_write(rt2x00dev
, TXOP_HLDR_ET
, reg
);
4850 rt2800_register_read(rt2x00dev
, TX_RTS_CFG
, ®
);
4851 rt2x00_set_field32(®
, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT
, 32);
4852 rt2x00_set_field32(®
, TX_RTS_CFG_RTS_THRES
,
4853 IEEE80211_MAX_RTS_THRESHOLD
);
4854 rt2x00_set_field32(®
, TX_RTS_CFG_RTS_FBK_EN
, 0);
4855 rt2800_register_write(rt2x00dev
, TX_RTS_CFG
, reg
);
4857 rt2800_register_write(rt2x00dev
, EXP_ACK_TIME
, 0x002400ca);
4860 * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS
4861 * time should be set to 16. However, the original Ralink driver uses
4862 * 16 for both and indeed using a value of 10 for CCK SIFS results in
4863 * connection problems with 11g + CTS protection. Hence, use the same
4864 * defaults as the Ralink driver: 16 for both, CCK and OFDM SIFS.
4866 rt2800_register_read(rt2x00dev
, XIFS_TIME_CFG
, ®
);
4867 rt2x00_set_field32(®
, XIFS_TIME_CFG_CCKM_SIFS_TIME
, 16);
4868 rt2x00_set_field32(®
, XIFS_TIME_CFG_OFDM_SIFS_TIME
, 16);
4869 rt2x00_set_field32(®
, XIFS_TIME_CFG_OFDM_XIFS_TIME
, 4);
4870 rt2x00_set_field32(®
, XIFS_TIME_CFG_EIFS
, 314);
4871 rt2x00_set_field32(®
, XIFS_TIME_CFG_BB_RXEND_ENABLE
, 1);
4872 rt2800_register_write(rt2x00dev
, XIFS_TIME_CFG
, reg
);
4874 rt2800_register_write(rt2x00dev
, PWR_PIN_CFG
, 0x00000003);
4877 * ASIC will keep garbage value after boot, clear encryption keys.
4879 for (i
= 0; i
< 4; i
++)
4880 rt2800_register_write(rt2x00dev
,
4881 SHARED_KEY_MODE_ENTRY(i
), 0);
4883 for (i
= 0; i
< 256; i
++) {
4884 rt2800_config_wcid(rt2x00dev
, NULL
, i
);
4885 rt2800_delete_wcid_attr(rt2x00dev
, i
);
4886 rt2800_register_write(rt2x00dev
, MAC_IVEIV_ENTRY(i
), 0);
4892 for (i
= 0; i
< 8; i
++)
4893 rt2800_clear_beacon_register(rt2x00dev
, i
);
4895 if (rt2x00_is_usb(rt2x00dev
)) {
4896 rt2800_register_read(rt2x00dev
, US_CYC_CNT
, ®
);
4897 rt2x00_set_field32(®
, US_CYC_CNT_CLOCK_CYCLE
, 30);
4898 rt2800_register_write(rt2x00dev
, US_CYC_CNT
, reg
);
4899 } else if (rt2x00_is_pcie(rt2x00dev
)) {
4900 rt2800_register_read(rt2x00dev
, US_CYC_CNT
, ®
);
4901 rt2x00_set_field32(®
, US_CYC_CNT_CLOCK_CYCLE
, 125);
4902 rt2800_register_write(rt2x00dev
, US_CYC_CNT
, reg
);
4905 rt2800_register_read(rt2x00dev
, HT_FBK_CFG0
, ®
);
4906 rt2x00_set_field32(®
, HT_FBK_CFG0_HTMCS0FBK
, 0);
4907 rt2x00_set_field32(®
, HT_FBK_CFG0_HTMCS1FBK
, 0);
4908 rt2x00_set_field32(®
, HT_FBK_CFG0_HTMCS2FBK
, 1);
4909 rt2x00_set_field32(®
, HT_FBK_CFG0_HTMCS3FBK
, 2);
4910 rt2x00_set_field32(®
, HT_FBK_CFG0_HTMCS4FBK
, 3);
4911 rt2x00_set_field32(®
, HT_FBK_CFG0_HTMCS5FBK
, 4);
4912 rt2x00_set_field32(®
, HT_FBK_CFG0_HTMCS6FBK
, 5);
4913 rt2x00_set_field32(®
, HT_FBK_CFG0_HTMCS7FBK
, 6);
4914 rt2800_register_write(rt2x00dev
, HT_FBK_CFG0
, reg
);
4916 rt2800_register_read(rt2x00dev
, HT_FBK_CFG1
, ®
);
4917 rt2x00_set_field32(®
, HT_FBK_CFG1_HTMCS8FBK
, 8);
4918 rt2x00_set_field32(®
, HT_FBK_CFG1_HTMCS9FBK
, 8);
4919 rt2x00_set_field32(®
, HT_FBK_CFG1_HTMCS10FBK
, 9);
4920 rt2x00_set_field32(®
, HT_FBK_CFG1_HTMCS11FBK
, 10);
4921 rt2x00_set_field32(®
, HT_FBK_CFG1_HTMCS12FBK
, 11);
4922 rt2x00_set_field32(®
, HT_FBK_CFG1_HTMCS13FBK
, 12);
4923 rt2x00_set_field32(®
, HT_FBK_CFG1_HTMCS14FBK
, 13);
4924 rt2x00_set_field32(®
, HT_FBK_CFG1_HTMCS15FBK
, 14);
4925 rt2800_register_write(rt2x00dev
, HT_FBK_CFG1
, reg
);
4927 rt2800_register_read(rt2x00dev
, LG_FBK_CFG0
, ®
);
4928 rt2x00_set_field32(®
, LG_FBK_CFG0_OFDMMCS0FBK
, 8);
4929 rt2x00_set_field32(®
, LG_FBK_CFG0_OFDMMCS1FBK
, 8);
4930 rt2x00_set_field32(®
, LG_FBK_CFG0_OFDMMCS2FBK
, 9);
4931 rt2x00_set_field32(®
, LG_FBK_CFG0_OFDMMCS3FBK
, 10);
4932 rt2x00_set_field32(®
, LG_FBK_CFG0_OFDMMCS4FBK
, 11);
4933 rt2x00_set_field32(®
, LG_FBK_CFG0_OFDMMCS5FBK
, 12);
4934 rt2x00_set_field32(®
, LG_FBK_CFG0_OFDMMCS6FBK
, 13);
4935 rt2x00_set_field32(®
, LG_FBK_CFG0_OFDMMCS7FBK
, 14);
4936 rt2800_register_write(rt2x00dev
, LG_FBK_CFG0
, reg
);
4938 rt2800_register_read(rt2x00dev
, LG_FBK_CFG1
, ®
);
4939 rt2x00_set_field32(®
, LG_FBK_CFG0_CCKMCS0FBK
, 0);
4940 rt2x00_set_field32(®
, LG_FBK_CFG0_CCKMCS1FBK
, 0);
4941 rt2x00_set_field32(®
, LG_FBK_CFG0_CCKMCS2FBK
, 1);
4942 rt2x00_set_field32(®
, LG_FBK_CFG0_CCKMCS3FBK
, 2);
4943 rt2800_register_write(rt2x00dev
, LG_FBK_CFG1
, reg
);
4946 * Do not force the BA window size, we use the TXWI to set it
4948 rt2800_register_read(rt2x00dev
, AMPDU_BA_WINSIZE
, ®
);
4949 rt2x00_set_field32(®
, AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE
, 0);
4950 rt2x00_set_field32(®
, AMPDU_BA_WINSIZE_FORCE_WINSIZE
, 0);
4951 rt2800_register_write(rt2x00dev
, AMPDU_BA_WINSIZE
, reg
);
4954 * We must clear the error counters.
4955 * These registers are cleared on read,
4956 * so we may pass a useless variable to store the value.
4958 rt2800_register_read(rt2x00dev
, RX_STA_CNT0
, ®
);
4959 rt2800_register_read(rt2x00dev
, RX_STA_CNT1
, ®
);
4960 rt2800_register_read(rt2x00dev
, RX_STA_CNT2
, ®
);
4961 rt2800_register_read(rt2x00dev
, TX_STA_CNT0
, ®
);
4962 rt2800_register_read(rt2x00dev
, TX_STA_CNT1
, ®
);
4963 rt2800_register_read(rt2x00dev
, TX_STA_CNT2
, ®
);
4966 * Setup leadtime for pre tbtt interrupt to 6ms
4968 rt2800_register_read(rt2x00dev
, INT_TIMER_CFG
, ®
);
4969 rt2x00_set_field32(®
, INT_TIMER_CFG_PRE_TBTT_TIMER
, 6 << 4);
4970 rt2800_register_write(rt2x00dev
, INT_TIMER_CFG
, reg
);
4973 * Set up channel statistics timer
4975 rt2800_register_read(rt2x00dev
, CH_TIME_CFG
, ®
);
4976 rt2x00_set_field32(®
, CH_TIME_CFG_EIFS_BUSY
, 1);
4977 rt2x00_set_field32(®
, CH_TIME_CFG_NAV_BUSY
, 1);
4978 rt2x00_set_field32(®
, CH_TIME_CFG_RX_BUSY
, 1);
4979 rt2x00_set_field32(®
, CH_TIME_CFG_TX_BUSY
, 1);
4980 rt2x00_set_field32(®
, CH_TIME_CFG_TMR_EN
, 1);
4981 rt2800_register_write(rt2x00dev
, CH_TIME_CFG
, reg
);
4986 static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev
*rt2x00dev
)
4991 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
4992 rt2800_register_read(rt2x00dev
, MAC_STATUS_CFG
, ®
);
4993 if (!rt2x00_get_field32(reg
, MAC_STATUS_CFG_BBP_RF_BUSY
))
4996 udelay(REGISTER_BUSY_DELAY
);
4999 rt2x00_err(rt2x00dev
, "BBP/RF register access failed, aborting\n");
5003 static int rt2800_wait_bbp_ready(struct rt2x00_dev
*rt2x00dev
)
5009 * BBP was enabled after firmware was loaded,
5010 * but we need to reactivate it now.
5012 rt2800_register_write(rt2x00dev
, H2M_BBP_AGENT
, 0);
5013 rt2800_register_write(rt2x00dev
, H2M_MAILBOX_CSR
, 0);
5016 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
5017 rt2800_bbp_read(rt2x00dev
, 0, &value
);
5018 if ((value
!= 0xff) && (value
!= 0x00))
5020 udelay(REGISTER_BUSY_DELAY
);
5023 rt2x00_err(rt2x00dev
, "BBP register access failed, aborting\n");
5027 static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev
*rt2x00dev
)
5031 rt2800_bbp_read(rt2x00dev
, 4, &value
);
5032 rt2x00_set_field8(&value
, BBP4_MAC_IF_CTRL
, 1);
5033 rt2800_bbp_write(rt2x00dev
, 4, value
);
5036 static void rt2800_init_freq_calibration(struct rt2x00_dev
*rt2x00dev
)
5038 rt2800_bbp_write(rt2x00dev
, 142, 1);
5039 rt2800_bbp_write(rt2x00dev
, 143, 57);
5042 static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev
*rt2x00dev
)
5044 const u8 glrt_table
[] = {
5045 0xE0, 0x1F, 0X38, 0x32, 0x08, 0x28, 0x19, 0x0A, 0xFF, 0x00, /* 128 ~ 137 */
5046 0x16, 0x10, 0x10, 0x0B, 0x36, 0x2C, 0x26, 0x24, 0x42, 0x36, /* 138 ~ 147 */
5047 0x30, 0x2D, 0x4C, 0x46, 0x3D, 0x40, 0x3E, 0x42, 0x3D, 0x40, /* 148 ~ 157 */
5048 0X3C, 0x34, 0x2C, 0x2F, 0x3C, 0x35, 0x2E, 0x2A, 0x49, 0x41, /* 158 ~ 167 */
5049 0x36, 0x31, 0x30, 0x30, 0x0E, 0x0D, 0x28, 0x21, 0x1C, 0x16, /* 168 ~ 177 */
5050 0x50, 0x4A, 0x43, 0x40, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, /* 178 ~ 187 */
5051 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 188 ~ 197 */
5052 0x00, 0x00, 0x7D, 0x14, 0x32, 0x2C, 0x36, 0x4C, 0x43, 0x2C, /* 198 ~ 207 */
5053 0x2E, 0x36, 0x30, 0x6E, /* 208 ~ 211 */
5057 for (i
= 0; i
< ARRAY_SIZE(glrt_table
); i
++) {
5058 rt2800_bbp_write(rt2x00dev
, 195, 128 + i
);
5059 rt2800_bbp_write(rt2x00dev
, 196, glrt_table
[i
]);
5063 static void rt2800_init_bbp_early(struct rt2x00_dev
*rt2x00dev
)
5065 rt2800_bbp_write(rt2x00dev
, 65, 0x2C);
5066 rt2800_bbp_write(rt2x00dev
, 66, 0x38);
5067 rt2800_bbp_write(rt2x00dev
, 68, 0x0B);
5068 rt2800_bbp_write(rt2x00dev
, 69, 0x12);
5069 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
5070 rt2800_bbp_write(rt2x00dev
, 73, 0x10);
5071 rt2800_bbp_write(rt2x00dev
, 81, 0x37);
5072 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
5073 rt2800_bbp_write(rt2x00dev
, 83, 0x6A);
5074 rt2800_bbp_write(rt2x00dev
, 84, 0x99);
5075 rt2800_bbp_write(rt2x00dev
, 86, 0x00);
5076 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5077 rt2800_bbp_write(rt2x00dev
, 92, 0x00);
5078 rt2800_bbp_write(rt2x00dev
, 103, 0x00);
5079 rt2800_bbp_write(rt2x00dev
, 105, 0x05);
5080 rt2800_bbp_write(rt2x00dev
, 106, 0x35);
5083 static void rt2800_disable_unused_dac_adc(struct rt2x00_dev
*rt2x00dev
)
5088 rt2800_bbp_read(rt2x00dev
, 138, &value
);
5089 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF0
, &eeprom
);
5090 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF0_TXPATH
) == 1)
5092 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF0_RXPATH
) == 1)
5094 rt2800_bbp_write(rt2x00dev
, 138, value
);
5097 static void rt2800_init_bbp_305x_soc(struct rt2x00_dev
*rt2x00dev
)
5099 rt2800_bbp_write(rt2x00dev
, 31, 0x08);
5101 rt2800_bbp_write(rt2x00dev
, 65, 0x2c);
5102 rt2800_bbp_write(rt2x00dev
, 66, 0x38);
5104 rt2800_bbp_write(rt2x00dev
, 69, 0x12);
5105 rt2800_bbp_write(rt2x00dev
, 73, 0x10);
5107 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
5109 rt2800_bbp_write(rt2x00dev
, 78, 0x0e);
5110 rt2800_bbp_write(rt2x00dev
, 80, 0x08);
5112 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
5114 rt2800_bbp_write(rt2x00dev
, 83, 0x6a);
5116 rt2800_bbp_write(rt2x00dev
, 84, 0x99);
5118 rt2800_bbp_write(rt2x00dev
, 86, 0x00);
5120 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5122 rt2800_bbp_write(rt2x00dev
, 92, 0x00);
5124 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
5126 rt2800_bbp_write(rt2x00dev
, 105, 0x01);
5128 rt2800_bbp_write(rt2x00dev
, 106, 0x35);
5131 static void rt2800_init_bbp_28xx(struct rt2x00_dev
*rt2x00dev
)
5133 rt2800_bbp_write(rt2x00dev
, 65, 0x2c);
5134 rt2800_bbp_write(rt2x00dev
, 66, 0x38);
5136 if (rt2x00_rt_rev(rt2x00dev
, RT2860
, REV_RT2860C
)) {
5137 rt2800_bbp_write(rt2x00dev
, 69, 0x16);
5138 rt2800_bbp_write(rt2x00dev
, 73, 0x12);
5140 rt2800_bbp_write(rt2x00dev
, 69, 0x12);
5141 rt2800_bbp_write(rt2x00dev
, 73, 0x10);
5144 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
5146 rt2800_bbp_write(rt2x00dev
, 81, 0x37);
5148 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
5150 rt2800_bbp_write(rt2x00dev
, 83, 0x6a);
5152 if (rt2x00_rt_rev(rt2x00dev
, RT2860
, REV_RT2860D
))
5153 rt2800_bbp_write(rt2x00dev
, 84, 0x19);
5155 rt2800_bbp_write(rt2x00dev
, 84, 0x99);
5157 rt2800_bbp_write(rt2x00dev
, 86, 0x00);
5159 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5161 rt2800_bbp_write(rt2x00dev
, 92, 0x00);
5163 rt2800_bbp_write(rt2x00dev
, 103, 0x00);
5165 rt2800_bbp_write(rt2x00dev
, 105, 0x05);
5167 rt2800_bbp_write(rt2x00dev
, 106, 0x35);
5170 static void rt2800_init_bbp_30xx(struct rt2x00_dev
*rt2x00dev
)
5172 rt2800_bbp_write(rt2x00dev
, 65, 0x2c);
5173 rt2800_bbp_write(rt2x00dev
, 66, 0x38);
5175 rt2800_bbp_write(rt2x00dev
, 69, 0x12);
5176 rt2800_bbp_write(rt2x00dev
, 73, 0x10);
5178 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
5180 rt2800_bbp_write(rt2x00dev
, 79, 0x13);
5181 rt2800_bbp_write(rt2x00dev
, 80, 0x05);
5182 rt2800_bbp_write(rt2x00dev
, 81, 0x33);
5184 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
5186 rt2800_bbp_write(rt2x00dev
, 83, 0x6a);
5188 rt2800_bbp_write(rt2x00dev
, 84, 0x99);
5190 rt2800_bbp_write(rt2x00dev
, 86, 0x00);
5192 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5194 rt2800_bbp_write(rt2x00dev
, 92, 0x00);
5196 if (rt2x00_rt_rev_gte(rt2x00dev
, RT3070
, REV_RT3070F
) ||
5197 rt2x00_rt_rev_gte(rt2x00dev
, RT3071
, REV_RT3071E
) ||
5198 rt2x00_rt_rev_gte(rt2x00dev
, RT3090
, REV_RT3090E
))
5199 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
5201 rt2800_bbp_write(rt2x00dev
, 103, 0x00);
5203 rt2800_bbp_write(rt2x00dev
, 105, 0x05);
5205 rt2800_bbp_write(rt2x00dev
, 106, 0x35);
5207 if (rt2x00_rt(rt2x00dev
, RT3071
) ||
5208 rt2x00_rt(rt2x00dev
, RT3090
))
5209 rt2800_disable_unused_dac_adc(rt2x00dev
);
5212 static void rt2800_init_bbp_3290(struct rt2x00_dev
*rt2x00dev
)
5216 rt2800_bbp4_mac_if_ctrl(rt2x00dev
);
5218 rt2800_bbp_write(rt2x00dev
, 31, 0x08);
5220 rt2800_bbp_write(rt2x00dev
, 65, 0x2c);
5221 rt2800_bbp_write(rt2x00dev
, 66, 0x38);
5223 rt2800_bbp_write(rt2x00dev
, 68, 0x0b);
5225 rt2800_bbp_write(rt2x00dev
, 69, 0x12);
5226 rt2800_bbp_write(rt2x00dev
, 73, 0x13);
5227 rt2800_bbp_write(rt2x00dev
, 75, 0x46);
5228 rt2800_bbp_write(rt2x00dev
, 76, 0x28);
5230 rt2800_bbp_write(rt2x00dev
, 77, 0x58);
5232 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
5234 rt2800_bbp_write(rt2x00dev
, 74, 0x0b);
5235 rt2800_bbp_write(rt2x00dev
, 79, 0x18);
5236 rt2800_bbp_write(rt2x00dev
, 80, 0x09);
5237 rt2800_bbp_write(rt2x00dev
, 81, 0x33);
5239 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
5241 rt2800_bbp_write(rt2x00dev
, 83, 0x7a);
5243 rt2800_bbp_write(rt2x00dev
, 84, 0x9a);
5245 rt2800_bbp_write(rt2x00dev
, 86, 0x38);
5247 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5249 rt2800_bbp_write(rt2x00dev
, 92, 0x02);
5251 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
5253 rt2800_bbp_write(rt2x00dev
, 104, 0x92);
5255 rt2800_bbp_write(rt2x00dev
, 105, 0x1c);
5257 rt2800_bbp_write(rt2x00dev
, 106, 0x03);
5259 rt2800_bbp_write(rt2x00dev
, 128, 0x12);
5261 rt2800_bbp_write(rt2x00dev
, 67, 0x24);
5262 rt2800_bbp_write(rt2x00dev
, 143, 0x04);
5263 rt2800_bbp_write(rt2x00dev
, 142, 0x99);
5264 rt2800_bbp_write(rt2x00dev
, 150, 0x30);
5265 rt2800_bbp_write(rt2x00dev
, 151, 0x2e);
5266 rt2800_bbp_write(rt2x00dev
, 152, 0x20);
5267 rt2800_bbp_write(rt2x00dev
, 153, 0x34);
5268 rt2800_bbp_write(rt2x00dev
, 154, 0x40);
5269 rt2800_bbp_write(rt2x00dev
, 155, 0x3b);
5270 rt2800_bbp_write(rt2x00dev
, 253, 0x04);
5272 rt2800_bbp_read(rt2x00dev
, 47, &value
);
5273 rt2x00_set_field8(&value
, BBP47_TSSI_ADC6
, 1);
5274 rt2800_bbp_write(rt2x00dev
, 47, value
);
5276 /* Use 5-bit ADC for Acquisition and 8-bit ADC for data */
5277 rt2800_bbp_read(rt2x00dev
, 3, &value
);
5278 rt2x00_set_field8(&value
, BBP3_ADC_MODE_SWITCH
, 1);
5279 rt2x00_set_field8(&value
, BBP3_ADC_INIT_MODE
, 1);
5280 rt2800_bbp_write(rt2x00dev
, 3, value
);
5283 static void rt2800_init_bbp_3352(struct rt2x00_dev
*rt2x00dev
)
5285 rt2800_bbp_write(rt2x00dev
, 3, 0x00);
5286 rt2800_bbp_write(rt2x00dev
, 4, 0x50);
5288 rt2800_bbp_write(rt2x00dev
, 31, 0x08);
5290 rt2800_bbp_write(rt2x00dev
, 47, 0x48);
5292 rt2800_bbp_write(rt2x00dev
, 65, 0x2c);
5293 rt2800_bbp_write(rt2x00dev
, 66, 0x38);
5295 rt2800_bbp_write(rt2x00dev
, 68, 0x0b);
5297 rt2800_bbp_write(rt2x00dev
, 69, 0x12);
5298 rt2800_bbp_write(rt2x00dev
, 73, 0x13);
5299 rt2800_bbp_write(rt2x00dev
, 75, 0x46);
5300 rt2800_bbp_write(rt2x00dev
, 76, 0x28);
5302 rt2800_bbp_write(rt2x00dev
, 77, 0x59);
5304 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
5306 rt2800_bbp_write(rt2x00dev
, 78, 0x0e);
5307 rt2800_bbp_write(rt2x00dev
, 80, 0x08);
5308 rt2800_bbp_write(rt2x00dev
, 81, 0x37);
5310 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
5312 rt2800_bbp_write(rt2x00dev
, 83, 0x6a);
5314 rt2800_bbp_write(rt2x00dev
, 84, 0x99);
5316 rt2800_bbp_write(rt2x00dev
, 86, 0x38);
5318 rt2800_bbp_write(rt2x00dev
, 88, 0x90);
5320 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5322 rt2800_bbp_write(rt2x00dev
, 92, 0x02);
5324 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
5326 rt2800_bbp_write(rt2x00dev
, 104, 0x92);
5328 rt2800_bbp_write(rt2x00dev
, 105, 0x34);
5330 rt2800_bbp_write(rt2x00dev
, 106, 0x05);
5332 rt2800_bbp_write(rt2x00dev
, 120, 0x50);
5334 rt2800_bbp_write(rt2x00dev
, 137, 0x0f);
5336 rt2800_bbp_write(rt2x00dev
, 163, 0xbd);
5337 /* Set ITxBF timeout to 0x9c40=1000msec */
5338 rt2800_bbp_write(rt2x00dev
, 179, 0x02);
5339 rt2800_bbp_write(rt2x00dev
, 180, 0x00);
5340 rt2800_bbp_write(rt2x00dev
, 182, 0x40);
5341 rt2800_bbp_write(rt2x00dev
, 180, 0x01);
5342 rt2800_bbp_write(rt2x00dev
, 182, 0x9c);
5343 rt2800_bbp_write(rt2x00dev
, 179, 0x00);
5344 /* Reprogram the inband interface to put right values in RXWI */
5345 rt2800_bbp_write(rt2x00dev
, 142, 0x04);
5346 rt2800_bbp_write(rt2x00dev
, 143, 0x3b);
5347 rt2800_bbp_write(rt2x00dev
, 142, 0x06);
5348 rt2800_bbp_write(rt2x00dev
, 143, 0xa0);
5349 rt2800_bbp_write(rt2x00dev
, 142, 0x07);
5350 rt2800_bbp_write(rt2x00dev
, 143, 0xa1);
5351 rt2800_bbp_write(rt2x00dev
, 142, 0x08);
5352 rt2800_bbp_write(rt2x00dev
, 143, 0xa2);
5354 rt2800_bbp_write(rt2x00dev
, 148, 0xc8);
5357 static void rt2800_init_bbp_3390(struct rt2x00_dev
*rt2x00dev
)
5359 rt2800_bbp_write(rt2x00dev
, 65, 0x2c);
5360 rt2800_bbp_write(rt2x00dev
, 66, 0x38);
5362 rt2800_bbp_write(rt2x00dev
, 69, 0x12);
5363 rt2800_bbp_write(rt2x00dev
, 73, 0x10);
5365 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
5367 rt2800_bbp_write(rt2x00dev
, 79, 0x13);
5368 rt2800_bbp_write(rt2x00dev
, 80, 0x05);
5369 rt2800_bbp_write(rt2x00dev
, 81, 0x33);
5371 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
5373 rt2800_bbp_write(rt2x00dev
, 83, 0x6a);
5375 rt2800_bbp_write(rt2x00dev
, 84, 0x99);
5377 rt2800_bbp_write(rt2x00dev
, 86, 0x00);
5379 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5381 rt2800_bbp_write(rt2x00dev
, 92, 0x00);
5383 if (rt2x00_rt_rev_gte(rt2x00dev
, RT3390
, REV_RT3390E
))
5384 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
5386 rt2800_bbp_write(rt2x00dev
, 103, 0x00);
5388 rt2800_bbp_write(rt2x00dev
, 105, 0x05);
5390 rt2800_bbp_write(rt2x00dev
, 106, 0x35);
5392 rt2800_disable_unused_dac_adc(rt2x00dev
);
5395 static void rt2800_init_bbp_3572(struct rt2x00_dev
*rt2x00dev
)
5397 rt2800_bbp_write(rt2x00dev
, 31, 0x08);
5399 rt2800_bbp_write(rt2x00dev
, 65, 0x2c);
5400 rt2800_bbp_write(rt2x00dev
, 66, 0x38);
5402 rt2800_bbp_write(rt2x00dev
, 69, 0x12);
5403 rt2800_bbp_write(rt2x00dev
, 73, 0x10);
5405 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
5407 rt2800_bbp_write(rt2x00dev
, 79, 0x13);
5408 rt2800_bbp_write(rt2x00dev
, 80, 0x05);
5409 rt2800_bbp_write(rt2x00dev
, 81, 0x33);
5411 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
5413 rt2800_bbp_write(rt2x00dev
, 83, 0x6a);
5415 rt2800_bbp_write(rt2x00dev
, 84, 0x99);
5417 rt2800_bbp_write(rt2x00dev
, 86, 0x00);
5419 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5421 rt2800_bbp_write(rt2x00dev
, 92, 0x00);
5423 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
5425 rt2800_bbp_write(rt2x00dev
, 105, 0x05);
5427 rt2800_bbp_write(rt2x00dev
, 106, 0x35);
5429 rt2800_disable_unused_dac_adc(rt2x00dev
);
5432 static void rt2800_init_bbp_3593(struct rt2x00_dev
*rt2x00dev
)
5434 rt2800_init_bbp_early(rt2x00dev
);
5436 rt2800_bbp_write(rt2x00dev
, 79, 0x13);
5437 rt2800_bbp_write(rt2x00dev
, 80, 0x05);
5438 rt2800_bbp_write(rt2x00dev
, 81, 0x33);
5439 rt2800_bbp_write(rt2x00dev
, 137, 0x0f);
5441 rt2800_bbp_write(rt2x00dev
, 84, 0x19);
5443 /* Enable DC filter */
5444 if (rt2x00_rt_rev_gte(rt2x00dev
, RT3593
, REV_RT3593E
))
5445 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
5448 static void rt2800_init_bbp_53xx(struct rt2x00_dev
*rt2x00dev
)
5454 rt2800_bbp4_mac_if_ctrl(rt2x00dev
);
5456 rt2800_bbp_write(rt2x00dev
, 31, 0x08);
5458 rt2800_bbp_write(rt2x00dev
, 65, 0x2c);
5459 rt2800_bbp_write(rt2x00dev
, 66, 0x38);
5461 rt2800_bbp_write(rt2x00dev
, 68, 0x0b);
5463 rt2800_bbp_write(rt2x00dev
, 69, 0x12);
5464 rt2800_bbp_write(rt2x00dev
, 73, 0x13);
5465 rt2800_bbp_write(rt2x00dev
, 75, 0x46);
5466 rt2800_bbp_write(rt2x00dev
, 76, 0x28);
5468 rt2800_bbp_write(rt2x00dev
, 77, 0x59);
5470 rt2800_bbp_write(rt2x00dev
, 70, 0x0a);
5472 rt2800_bbp_write(rt2x00dev
, 79, 0x13);
5473 rt2800_bbp_write(rt2x00dev
, 80, 0x05);
5474 rt2800_bbp_write(rt2x00dev
, 81, 0x33);
5476 rt2800_bbp_write(rt2x00dev
, 82, 0x62);
5478 rt2800_bbp_write(rt2x00dev
, 83, 0x7a);
5480 rt2800_bbp_write(rt2x00dev
, 84, 0x9a);
5482 rt2800_bbp_write(rt2x00dev
, 86, 0x38);
5484 if (rt2x00_rt(rt2x00dev
, RT5392
))
5485 rt2800_bbp_write(rt2x00dev
, 88, 0x90);
5487 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5489 rt2800_bbp_write(rt2x00dev
, 92, 0x02);
5491 if (rt2x00_rt(rt2x00dev
, RT5392
)) {
5492 rt2800_bbp_write(rt2x00dev
, 95, 0x9a);
5493 rt2800_bbp_write(rt2x00dev
, 98, 0x12);
5496 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
5498 rt2800_bbp_write(rt2x00dev
, 104, 0x92);
5500 rt2800_bbp_write(rt2x00dev
, 105, 0x3c);
5502 if (rt2x00_rt(rt2x00dev
, RT5390
))
5503 rt2800_bbp_write(rt2x00dev
, 106, 0x03);
5504 else if (rt2x00_rt(rt2x00dev
, RT5392
))
5505 rt2800_bbp_write(rt2x00dev
, 106, 0x12);
5509 rt2800_bbp_write(rt2x00dev
, 128, 0x12);
5511 if (rt2x00_rt(rt2x00dev
, RT5392
)) {
5512 rt2800_bbp_write(rt2x00dev
, 134, 0xd0);
5513 rt2800_bbp_write(rt2x00dev
, 135, 0xf6);
5516 rt2800_disable_unused_dac_adc(rt2x00dev
);
5518 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF1
, &eeprom
);
5519 div_mode
= rt2x00_get_field16(eeprom
,
5520 EEPROM_NIC_CONF1_ANT_DIVERSITY
);
5521 ant
= (div_mode
== 3) ? 1 : 0;
5523 /* check if this is a Bluetooth combo card */
5524 if (rt2x00_has_cap_bt_coexist(rt2x00dev
)) {
5527 rt2800_register_read(rt2x00dev
, GPIO_CTRL
, ®
);
5528 rt2x00_set_field32(®
, GPIO_CTRL_DIR3
, 0);
5529 rt2x00_set_field32(®
, GPIO_CTRL_DIR6
, 0);
5530 rt2x00_set_field32(®
, GPIO_CTRL_VAL3
, 0);
5531 rt2x00_set_field32(®
, GPIO_CTRL_VAL6
, 0);
5533 rt2x00_set_field32(®
, GPIO_CTRL_VAL3
, 1);
5535 rt2x00_set_field32(®
, GPIO_CTRL_VAL6
, 1);
5536 rt2800_register_write(rt2x00dev
, GPIO_CTRL
, reg
);
5539 /* This chip has hardware antenna diversity*/
5540 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390R
)) {
5541 rt2800_bbp_write(rt2x00dev
, 150, 0); /* Disable Antenna Software OFDM */
5542 rt2800_bbp_write(rt2x00dev
, 151, 0); /* Disable Antenna Software CCK */
5543 rt2800_bbp_write(rt2x00dev
, 154, 0); /* Clear previously selected antenna */
5546 rt2800_bbp_read(rt2x00dev
, 152, &value
);
5548 rt2x00_set_field8(&value
, BBP152_RX_DEFAULT_ANT
, 1);
5550 rt2x00_set_field8(&value
, BBP152_RX_DEFAULT_ANT
, 0);
5551 rt2800_bbp_write(rt2x00dev
, 152, value
);
5553 rt2800_init_freq_calibration(rt2x00dev
);
5556 static void rt2800_init_bbp_5592(struct rt2x00_dev
*rt2x00dev
)
5562 rt2800_init_bbp_early(rt2x00dev
);
5564 rt2800_bbp_read(rt2x00dev
, 105, &value
);
5565 rt2x00_set_field8(&value
, BBP105_MLD
,
5566 rt2x00dev
->default_ant
.rx_chain_num
== 2);
5567 rt2800_bbp_write(rt2x00dev
, 105, value
);
5569 rt2800_bbp4_mac_if_ctrl(rt2x00dev
);
5571 rt2800_bbp_write(rt2x00dev
, 20, 0x06);
5572 rt2800_bbp_write(rt2x00dev
, 31, 0x08);
5573 rt2800_bbp_write(rt2x00dev
, 65, 0x2C);
5574 rt2800_bbp_write(rt2x00dev
, 68, 0xDD);
5575 rt2800_bbp_write(rt2x00dev
, 69, 0x1A);
5576 rt2800_bbp_write(rt2x00dev
, 70, 0x05);
5577 rt2800_bbp_write(rt2x00dev
, 73, 0x13);
5578 rt2800_bbp_write(rt2x00dev
, 74, 0x0F);
5579 rt2800_bbp_write(rt2x00dev
, 75, 0x4F);
5580 rt2800_bbp_write(rt2x00dev
, 76, 0x28);
5581 rt2800_bbp_write(rt2x00dev
, 77, 0x59);
5582 rt2800_bbp_write(rt2x00dev
, 84, 0x9A);
5583 rt2800_bbp_write(rt2x00dev
, 86, 0x38);
5584 rt2800_bbp_write(rt2x00dev
, 88, 0x90);
5585 rt2800_bbp_write(rt2x00dev
, 91, 0x04);
5586 rt2800_bbp_write(rt2x00dev
, 92, 0x02);
5587 rt2800_bbp_write(rt2x00dev
, 95, 0x9a);
5588 rt2800_bbp_write(rt2x00dev
, 98, 0x12);
5589 rt2800_bbp_write(rt2x00dev
, 103, 0xC0);
5590 rt2800_bbp_write(rt2x00dev
, 104, 0x92);
5591 /* FIXME BBP105 owerwrite */
5592 rt2800_bbp_write(rt2x00dev
, 105, 0x3C);
5593 rt2800_bbp_write(rt2x00dev
, 106, 0x35);
5594 rt2800_bbp_write(rt2x00dev
, 128, 0x12);
5595 rt2800_bbp_write(rt2x00dev
, 134, 0xD0);
5596 rt2800_bbp_write(rt2x00dev
, 135, 0xF6);
5597 rt2800_bbp_write(rt2x00dev
, 137, 0x0F);
5599 /* Initialize GLRT (Generalized Likehood Radio Test) */
5600 rt2800_init_bbp_5592_glrt(rt2x00dev
);
5602 rt2800_bbp4_mac_if_ctrl(rt2x00dev
);
5604 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF1
, &eeprom
);
5605 div_mode
= rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF1_ANT_DIVERSITY
);
5606 ant
= (div_mode
== 3) ? 1 : 0;
5607 rt2800_bbp_read(rt2x00dev
, 152, &value
);
5610 rt2x00_set_field8(&value
, BBP152_RX_DEFAULT_ANT
, 1);
5612 /* Auxiliary antenna */
5613 rt2x00_set_field8(&value
, BBP152_RX_DEFAULT_ANT
, 0);
5615 rt2800_bbp_write(rt2x00dev
, 152, value
);
5617 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5592
, REV_RT5592C
)) {
5618 rt2800_bbp_read(rt2x00dev
, 254, &value
);
5619 rt2x00_set_field8(&value
, BBP254_BIT7
, 1);
5620 rt2800_bbp_write(rt2x00dev
, 254, value
);
5623 rt2800_init_freq_calibration(rt2x00dev
);
5625 rt2800_bbp_write(rt2x00dev
, 84, 0x19);
5626 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5592
, REV_RT5592C
))
5627 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
5630 static void rt2800_init_bbp(struct rt2x00_dev
*rt2x00dev
)
5637 if (rt2800_is_305x_soc(rt2x00dev
))
5638 rt2800_init_bbp_305x_soc(rt2x00dev
);
5640 switch (rt2x00dev
->chip
.rt
) {
5644 rt2800_init_bbp_28xx(rt2x00dev
);
5649 rt2800_init_bbp_30xx(rt2x00dev
);
5652 rt2800_init_bbp_3290(rt2x00dev
);
5655 rt2800_init_bbp_3352(rt2x00dev
);
5658 rt2800_init_bbp_3390(rt2x00dev
);
5661 rt2800_init_bbp_3572(rt2x00dev
);
5664 rt2800_init_bbp_3593(rt2x00dev
);
5668 rt2800_init_bbp_53xx(rt2x00dev
);
5671 rt2800_init_bbp_5592(rt2x00dev
);
5675 for (i
= 0; i
< EEPROM_BBP_SIZE
; i
++) {
5676 rt2800_eeprom_read_from_array(rt2x00dev
, EEPROM_BBP_START
, i
,
5679 if (eeprom
!= 0xffff && eeprom
!= 0x0000) {
5680 reg_id
= rt2x00_get_field16(eeprom
, EEPROM_BBP_REG_ID
);
5681 value
= rt2x00_get_field16(eeprom
, EEPROM_BBP_VALUE
);
5682 rt2800_bbp_write(rt2x00dev
, reg_id
, value
);
5687 static void rt2800_led_open_drain_enable(struct rt2x00_dev
*rt2x00dev
)
5691 rt2800_register_read(rt2x00dev
, OPT_14_CSR
, ®
);
5692 rt2x00_set_field32(®
, OPT_14_CSR_BIT0
, 1);
5693 rt2800_register_write(rt2x00dev
, OPT_14_CSR
, reg
);
5696 static u8
rt2800_init_rx_filter(struct rt2x00_dev
*rt2x00dev
, bool bw40
,
5705 u8 rfcsr24
= (bw40
) ? 0x27 : 0x07;
5707 rt2800_rfcsr_write(rt2x00dev
, 24, rfcsr24
);
5709 rt2800_bbp_read(rt2x00dev
, 4, &bbp
);
5710 rt2x00_set_field8(&bbp
, BBP4_BANDWIDTH
, 2 * bw40
);
5711 rt2800_bbp_write(rt2x00dev
, 4, bbp
);
5713 rt2800_rfcsr_read(rt2x00dev
, 31, &rfcsr
);
5714 rt2x00_set_field8(&rfcsr
, RFCSR31_RX_H20M
, bw40
);
5715 rt2800_rfcsr_write(rt2x00dev
, 31, rfcsr
);
5717 rt2800_rfcsr_read(rt2x00dev
, 22, &rfcsr
);
5718 rt2x00_set_field8(&rfcsr
, RFCSR22_BASEBAND_LOOPBACK
, 1);
5719 rt2800_rfcsr_write(rt2x00dev
, 22, rfcsr
);
5722 * Set power & frequency of passband test tone
5724 rt2800_bbp_write(rt2x00dev
, 24, 0);
5726 for (i
= 0; i
< 100; i
++) {
5727 rt2800_bbp_write(rt2x00dev
, 25, 0x90);
5730 rt2800_bbp_read(rt2x00dev
, 55, &passband
);
5736 * Set power & frequency of stopband test tone
5738 rt2800_bbp_write(rt2x00dev
, 24, 0x06);
5740 for (i
= 0; i
< 100; i
++) {
5741 rt2800_bbp_write(rt2x00dev
, 25, 0x90);
5744 rt2800_bbp_read(rt2x00dev
, 55, &stopband
);
5746 if ((passband
- stopband
) <= filter_target
) {
5748 overtuned
+= ((passband
- stopband
) == filter_target
);
5752 rt2800_rfcsr_write(rt2x00dev
, 24, rfcsr24
);
5755 rfcsr24
-= !!overtuned
;
5757 rt2800_rfcsr_write(rt2x00dev
, 24, rfcsr24
);
5761 static void rt2800_rf_init_calibration(struct rt2x00_dev
*rt2x00dev
,
5762 const unsigned int rf_reg
)
5766 rt2800_rfcsr_read(rt2x00dev
, rf_reg
, &rfcsr
);
5767 rt2x00_set_field8(&rfcsr
, FIELD8(0x80), 1);
5768 rt2800_rfcsr_write(rt2x00dev
, rf_reg
, rfcsr
);
5770 rt2x00_set_field8(&rfcsr
, FIELD8(0x80), 0);
5771 rt2800_rfcsr_write(rt2x00dev
, rf_reg
, rfcsr
);
5774 static void rt2800_rx_filter_calibration(struct rt2x00_dev
*rt2x00dev
)
5776 struct rt2800_drv_data
*drv_data
= rt2x00dev
->drv_data
;
5782 * TODO: sync filter_tgt values with vendor driver
5784 if (rt2x00_rt(rt2x00dev
, RT3070
)) {
5785 filter_tgt_bw20
= 0x16;
5786 filter_tgt_bw40
= 0x19;
5788 filter_tgt_bw20
= 0x13;
5789 filter_tgt_bw40
= 0x15;
5792 drv_data
->calibration_bw20
=
5793 rt2800_init_rx_filter(rt2x00dev
, false, filter_tgt_bw20
);
5794 drv_data
->calibration_bw40
=
5795 rt2800_init_rx_filter(rt2x00dev
, true, filter_tgt_bw40
);
5798 * Save BBP 25 & 26 values for later use in channel switching (for 3052)
5800 rt2800_bbp_read(rt2x00dev
, 25, &drv_data
->bbp25
);
5801 rt2800_bbp_read(rt2x00dev
, 26, &drv_data
->bbp26
);
5804 * Set back to initial state
5806 rt2800_bbp_write(rt2x00dev
, 24, 0);
5808 rt2800_rfcsr_read(rt2x00dev
, 22, &rfcsr
);
5809 rt2x00_set_field8(&rfcsr
, RFCSR22_BASEBAND_LOOPBACK
, 0);
5810 rt2800_rfcsr_write(rt2x00dev
, 22, rfcsr
);
5813 * Set BBP back to BW20
5815 rt2800_bbp_read(rt2x00dev
, 4, &bbp
);
5816 rt2x00_set_field8(&bbp
, BBP4_BANDWIDTH
, 0);
5817 rt2800_bbp_write(rt2x00dev
, 4, bbp
);
5820 static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev
*rt2x00dev
)
5822 struct rt2800_drv_data
*drv_data
= rt2x00dev
->drv_data
;
5823 u8 min_gain
, rfcsr
, bbp
;
5826 rt2800_rfcsr_read(rt2x00dev
, 17, &rfcsr
);
5828 rt2x00_set_field8(&rfcsr
, RFCSR17_TX_LO1_EN
, 0);
5829 if (rt2x00_rt(rt2x00dev
, RT3070
) ||
5830 rt2x00_rt_rev_lt(rt2x00dev
, RT3071
, REV_RT3071E
) ||
5831 rt2x00_rt_rev_lt(rt2x00dev
, RT3090
, REV_RT3090E
) ||
5832 rt2x00_rt_rev_lt(rt2x00dev
, RT3390
, REV_RT3390E
)) {
5833 if (!rt2x00_has_cap_external_lna_bg(rt2x00dev
))
5834 rt2x00_set_field8(&rfcsr
, RFCSR17_R
, 1);
5837 min_gain
= rt2x00_rt(rt2x00dev
, RT3070
) ? 1 : 2;
5838 if (drv_data
->txmixer_gain_24g
>= min_gain
) {
5839 rt2x00_set_field8(&rfcsr
, RFCSR17_TXMIXER_GAIN
,
5840 drv_data
->txmixer_gain_24g
);
5843 rt2800_rfcsr_write(rt2x00dev
, 17, rfcsr
);
5845 if (rt2x00_rt(rt2x00dev
, RT3090
)) {
5846 /* Turn off unused DAC1 and ADC1 to reduce power consumption */
5847 rt2800_bbp_read(rt2x00dev
, 138, &bbp
);
5848 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF0
, &eeprom
);
5849 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF0_RXPATH
) == 1)
5850 rt2x00_set_field8(&bbp
, BBP138_RX_ADC1
, 0);
5851 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF0_TXPATH
) == 1)
5852 rt2x00_set_field8(&bbp
, BBP138_TX_DAC1
, 1);
5853 rt2800_bbp_write(rt2x00dev
, 138, bbp
);
5856 if (rt2x00_rt(rt2x00dev
, RT3070
)) {
5857 rt2800_rfcsr_read(rt2x00dev
, 27, &rfcsr
);
5858 if (rt2x00_rt_rev_lt(rt2x00dev
, RT3070
, REV_RT3070F
))
5859 rt2x00_set_field8(&rfcsr
, RFCSR27_R1
, 3);
5861 rt2x00_set_field8(&rfcsr
, RFCSR27_R1
, 0);
5862 rt2x00_set_field8(&rfcsr
, RFCSR27_R2
, 0);
5863 rt2x00_set_field8(&rfcsr
, RFCSR27_R3
, 0);
5864 rt2x00_set_field8(&rfcsr
, RFCSR27_R4
, 0);
5865 rt2800_rfcsr_write(rt2x00dev
, 27, rfcsr
);
5866 } else if (rt2x00_rt(rt2x00dev
, RT3071
) ||
5867 rt2x00_rt(rt2x00dev
, RT3090
) ||
5868 rt2x00_rt(rt2x00dev
, RT3390
)) {
5869 rt2800_rfcsr_read(rt2x00dev
, 1, &rfcsr
);
5870 rt2x00_set_field8(&rfcsr
, RFCSR1_RF_BLOCK_EN
, 1);
5871 rt2x00_set_field8(&rfcsr
, RFCSR1_RX0_PD
, 0);
5872 rt2x00_set_field8(&rfcsr
, RFCSR1_TX0_PD
, 0);
5873 rt2x00_set_field8(&rfcsr
, RFCSR1_RX1_PD
, 1);
5874 rt2x00_set_field8(&rfcsr
, RFCSR1_TX1_PD
, 1);
5875 rt2800_rfcsr_write(rt2x00dev
, 1, rfcsr
);
5877 rt2800_rfcsr_read(rt2x00dev
, 15, &rfcsr
);
5878 rt2x00_set_field8(&rfcsr
, RFCSR15_TX_LO2_EN
, 0);
5879 rt2800_rfcsr_write(rt2x00dev
, 15, rfcsr
);
5881 rt2800_rfcsr_read(rt2x00dev
, 20, &rfcsr
);
5882 rt2x00_set_field8(&rfcsr
, RFCSR20_RX_LO1_EN
, 0);
5883 rt2800_rfcsr_write(rt2x00dev
, 20, rfcsr
);
5885 rt2800_rfcsr_read(rt2x00dev
, 21, &rfcsr
);
5886 rt2x00_set_field8(&rfcsr
, RFCSR21_RX_LO2_EN
, 0);
5887 rt2800_rfcsr_write(rt2x00dev
, 21, rfcsr
);
5891 static void rt2800_normal_mode_setup_3593(struct rt2x00_dev
*rt2x00dev
)
5893 struct rt2800_drv_data
*drv_data
= rt2x00dev
->drv_data
;
5897 rt2800_rfcsr_read(rt2x00dev
, 50, &rfcsr
);
5898 rt2x00_set_field8(&rfcsr
, RFCSR50_TX_LO2_EN
, 0);
5899 rt2800_rfcsr_write(rt2x00dev
, 50, rfcsr
);
5901 rt2800_rfcsr_read(rt2x00dev
, 51, &rfcsr
);
5902 tx_gain
= rt2x00_get_field8(drv_data
->txmixer_gain_24g
,
5903 RFCSR17_TXMIXER_GAIN
);
5904 rt2x00_set_field8(&rfcsr
, RFCSR51_BITS24
, tx_gain
);
5905 rt2800_rfcsr_write(rt2x00dev
, 51, rfcsr
);
5907 rt2800_rfcsr_read(rt2x00dev
, 38, &rfcsr
);
5908 rt2x00_set_field8(&rfcsr
, RFCSR38_RX_LO1_EN
, 0);
5909 rt2800_rfcsr_write(rt2x00dev
, 38, rfcsr
);
5911 rt2800_rfcsr_read(rt2x00dev
, 39, &rfcsr
);
5912 rt2x00_set_field8(&rfcsr
, RFCSR39_RX_LO2_EN
, 0);
5913 rt2800_rfcsr_write(rt2x00dev
, 39, rfcsr
);
5915 rt2800_rfcsr_read(rt2x00dev
, 1, &rfcsr
);
5916 rt2x00_set_field8(&rfcsr
, RFCSR1_RF_BLOCK_EN
, 1);
5917 rt2x00_set_field8(&rfcsr
, RFCSR1_PLL_PD
, 1);
5918 rt2800_rfcsr_write(rt2x00dev
, 1, rfcsr
);
5920 rt2800_rfcsr_read(rt2x00dev
, 30, &rfcsr
);
5921 rt2x00_set_field8(&rfcsr
, RFCSR30_RX_VCM
, 2);
5922 rt2800_rfcsr_write(rt2x00dev
, 30, rfcsr
);
5924 /* TODO: enable stream mode */
5927 static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev
*rt2x00dev
)
5932 /* Turn off unused DAC1 and ADC1 to reduce power consumption */
5933 rt2800_bbp_read(rt2x00dev
, 138, ®
);
5934 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF0
, &eeprom
);
5935 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF0_RXPATH
) == 1)
5936 rt2x00_set_field8(®
, BBP138_RX_ADC1
, 0);
5937 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF0_TXPATH
) == 1)
5938 rt2x00_set_field8(®
, BBP138_TX_DAC1
, 1);
5939 rt2800_bbp_write(rt2x00dev
, 138, reg
);
5941 rt2800_rfcsr_read(rt2x00dev
, 38, ®
);
5942 rt2x00_set_field8(®
, RFCSR38_RX_LO1_EN
, 0);
5943 rt2800_rfcsr_write(rt2x00dev
, 38, reg
);
5945 rt2800_rfcsr_read(rt2x00dev
, 39, ®
);
5946 rt2x00_set_field8(®
, RFCSR39_RX_LO2_EN
, 0);
5947 rt2800_rfcsr_write(rt2x00dev
, 39, reg
);
5949 rt2800_bbp4_mac_if_ctrl(rt2x00dev
);
5951 rt2800_rfcsr_read(rt2x00dev
, 30, ®
);
5952 rt2x00_set_field8(®
, RFCSR30_RX_VCM
, 2);
5953 rt2800_rfcsr_write(rt2x00dev
, 30, reg
);
5956 static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev
*rt2x00dev
)
5958 rt2800_rf_init_calibration(rt2x00dev
, 30);
5960 rt2800_rfcsr_write(rt2x00dev
, 0, 0x50);
5961 rt2800_rfcsr_write(rt2x00dev
, 1, 0x01);
5962 rt2800_rfcsr_write(rt2x00dev
, 2, 0xf7);
5963 rt2800_rfcsr_write(rt2x00dev
, 3, 0x75);
5964 rt2800_rfcsr_write(rt2x00dev
, 4, 0x40);
5965 rt2800_rfcsr_write(rt2x00dev
, 5, 0x03);
5966 rt2800_rfcsr_write(rt2x00dev
, 6, 0x02);
5967 rt2800_rfcsr_write(rt2x00dev
, 7, 0x50);
5968 rt2800_rfcsr_write(rt2x00dev
, 8, 0x39);
5969 rt2800_rfcsr_write(rt2x00dev
, 9, 0x0f);
5970 rt2800_rfcsr_write(rt2x00dev
, 10, 0x60);
5971 rt2800_rfcsr_write(rt2x00dev
, 11, 0x21);
5972 rt2800_rfcsr_write(rt2x00dev
, 12, 0x75);
5973 rt2800_rfcsr_write(rt2x00dev
, 13, 0x75);
5974 rt2800_rfcsr_write(rt2x00dev
, 14, 0x90);
5975 rt2800_rfcsr_write(rt2x00dev
, 15, 0x58);
5976 rt2800_rfcsr_write(rt2x00dev
, 16, 0xb3);
5977 rt2800_rfcsr_write(rt2x00dev
, 17, 0x92);
5978 rt2800_rfcsr_write(rt2x00dev
, 18, 0x2c);
5979 rt2800_rfcsr_write(rt2x00dev
, 19, 0x02);
5980 rt2800_rfcsr_write(rt2x00dev
, 20, 0xba);
5981 rt2800_rfcsr_write(rt2x00dev
, 21, 0xdb);
5982 rt2800_rfcsr_write(rt2x00dev
, 22, 0x00);
5983 rt2800_rfcsr_write(rt2x00dev
, 23, 0x31);
5984 rt2800_rfcsr_write(rt2x00dev
, 24, 0x08);
5985 rt2800_rfcsr_write(rt2x00dev
, 25, 0x01);
5986 rt2800_rfcsr_write(rt2x00dev
, 26, 0x25);
5987 rt2800_rfcsr_write(rt2x00dev
, 27, 0x23);
5988 rt2800_rfcsr_write(rt2x00dev
, 28, 0x13);
5989 rt2800_rfcsr_write(rt2x00dev
, 29, 0x83);
5990 rt2800_rfcsr_write(rt2x00dev
, 30, 0x00);
5991 rt2800_rfcsr_write(rt2x00dev
, 31, 0x00);
5994 static void rt2800_init_rfcsr_30xx(struct rt2x00_dev
*rt2x00dev
)
6000 /* XXX vendor driver do this only for 3070 */
6001 rt2800_rf_init_calibration(rt2x00dev
, 30);
6003 rt2800_rfcsr_write(rt2x00dev
, 4, 0x40);
6004 rt2800_rfcsr_write(rt2x00dev
, 5, 0x03);
6005 rt2800_rfcsr_write(rt2x00dev
, 6, 0x02);
6006 rt2800_rfcsr_write(rt2x00dev
, 7, 0x60);
6007 rt2800_rfcsr_write(rt2x00dev
, 9, 0x0f);
6008 rt2800_rfcsr_write(rt2x00dev
, 10, 0x41);
6009 rt2800_rfcsr_write(rt2x00dev
, 11, 0x21);
6010 rt2800_rfcsr_write(rt2x00dev
, 12, 0x7b);
6011 rt2800_rfcsr_write(rt2x00dev
, 14, 0x90);
6012 rt2800_rfcsr_write(rt2x00dev
, 15, 0x58);
6013 rt2800_rfcsr_write(rt2x00dev
, 16, 0xb3);
6014 rt2800_rfcsr_write(rt2x00dev
, 17, 0x92);
6015 rt2800_rfcsr_write(rt2x00dev
, 18, 0x2c);
6016 rt2800_rfcsr_write(rt2x00dev
, 19, 0x02);
6017 rt2800_rfcsr_write(rt2x00dev
, 20, 0xba);
6018 rt2800_rfcsr_write(rt2x00dev
, 21, 0xdb);
6019 rt2800_rfcsr_write(rt2x00dev
, 24, 0x16);
6020 rt2800_rfcsr_write(rt2x00dev
, 25, 0x03);
6021 rt2800_rfcsr_write(rt2x00dev
, 29, 0x1f);
6023 if (rt2x00_rt_rev_lt(rt2x00dev
, RT3070
, REV_RT3070F
)) {
6024 rt2800_register_read(rt2x00dev
, LDO_CFG0
, ®
);
6025 rt2x00_set_field32(®
, LDO_CFG0_BGSEL
, 1);
6026 rt2x00_set_field32(®
, LDO_CFG0_LDO_CORE_VLEVEL
, 3);
6027 rt2800_register_write(rt2x00dev
, LDO_CFG0
, reg
);
6028 } else if (rt2x00_rt(rt2x00dev
, RT3071
) ||
6029 rt2x00_rt(rt2x00dev
, RT3090
)) {
6030 rt2800_rfcsr_write(rt2x00dev
, 31, 0x14);
6032 rt2800_rfcsr_read(rt2x00dev
, 6, &rfcsr
);
6033 rt2x00_set_field8(&rfcsr
, RFCSR6_R2
, 1);
6034 rt2800_rfcsr_write(rt2x00dev
, 6, rfcsr
);
6036 rt2800_register_read(rt2x00dev
, LDO_CFG0
, ®
);
6037 rt2x00_set_field32(®
, LDO_CFG0_BGSEL
, 1);
6038 if (rt2x00_rt_rev_lt(rt2x00dev
, RT3071
, REV_RT3071E
) ||
6039 rt2x00_rt_rev_lt(rt2x00dev
, RT3090
, REV_RT3090E
)) {
6040 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF1
,
6042 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF1_DAC_TEST
))
6043 rt2x00_set_field32(®
, LDO_CFG0_LDO_CORE_VLEVEL
, 3);
6045 rt2x00_set_field32(®
, LDO_CFG0_LDO_CORE_VLEVEL
, 0);
6047 rt2800_register_write(rt2x00dev
, LDO_CFG0
, reg
);
6049 rt2800_register_read(rt2x00dev
, GPIO_SWITCH
, ®
);
6050 rt2x00_set_field32(®
, GPIO_SWITCH_5
, 0);
6051 rt2800_register_write(rt2x00dev
, GPIO_SWITCH
, reg
);
6054 rt2800_rx_filter_calibration(rt2x00dev
);
6056 if (rt2x00_rt_rev_lt(rt2x00dev
, RT3070
, REV_RT3070F
) ||
6057 rt2x00_rt_rev_lt(rt2x00dev
, RT3071
, REV_RT3071E
) ||
6058 rt2x00_rt_rev_lt(rt2x00dev
, RT3090
, REV_RT3090E
))
6059 rt2800_rfcsr_write(rt2x00dev
, 27, 0x03);
6061 rt2800_led_open_drain_enable(rt2x00dev
);
6062 rt2800_normal_mode_setup_3xxx(rt2x00dev
);
6065 static void rt2800_init_rfcsr_3290(struct rt2x00_dev
*rt2x00dev
)
6069 rt2800_rf_init_calibration(rt2x00dev
, 2);
6071 rt2800_rfcsr_write(rt2x00dev
, 1, 0x0f);
6072 rt2800_rfcsr_write(rt2x00dev
, 2, 0x80);
6073 rt2800_rfcsr_write(rt2x00dev
, 3, 0x08);
6074 rt2800_rfcsr_write(rt2x00dev
, 4, 0x00);
6075 rt2800_rfcsr_write(rt2x00dev
, 6, 0xa0);
6076 rt2800_rfcsr_write(rt2x00dev
, 8, 0xf3);
6077 rt2800_rfcsr_write(rt2x00dev
, 9, 0x02);
6078 rt2800_rfcsr_write(rt2x00dev
, 10, 0x53);
6079 rt2800_rfcsr_write(rt2x00dev
, 11, 0x4a);
6080 rt2800_rfcsr_write(rt2x00dev
, 12, 0x46);
6081 rt2800_rfcsr_write(rt2x00dev
, 13, 0x9f);
6082 rt2800_rfcsr_write(rt2x00dev
, 18, 0x02);
6083 rt2800_rfcsr_write(rt2x00dev
, 22, 0x20);
6084 rt2800_rfcsr_write(rt2x00dev
, 25, 0x83);
6085 rt2800_rfcsr_write(rt2x00dev
, 26, 0x82);
6086 rt2800_rfcsr_write(rt2x00dev
, 27, 0x09);
6087 rt2800_rfcsr_write(rt2x00dev
, 29, 0x10);
6088 rt2800_rfcsr_write(rt2x00dev
, 30, 0x10);
6089 rt2800_rfcsr_write(rt2x00dev
, 31, 0x80);
6090 rt2800_rfcsr_write(rt2x00dev
, 32, 0x80);
6091 rt2800_rfcsr_write(rt2x00dev
, 33, 0x00);
6092 rt2800_rfcsr_write(rt2x00dev
, 34, 0x05);
6093 rt2800_rfcsr_write(rt2x00dev
, 35, 0x12);
6094 rt2800_rfcsr_write(rt2x00dev
, 36, 0x00);
6095 rt2800_rfcsr_write(rt2x00dev
, 38, 0x85);
6096 rt2800_rfcsr_write(rt2x00dev
, 39, 0x1b);
6097 rt2800_rfcsr_write(rt2x00dev
, 40, 0x0b);
6098 rt2800_rfcsr_write(rt2x00dev
, 41, 0xbb);
6099 rt2800_rfcsr_write(rt2x00dev
, 42, 0xd5);
6100 rt2800_rfcsr_write(rt2x00dev
, 43, 0x7b);
6101 rt2800_rfcsr_write(rt2x00dev
, 44, 0x0e);
6102 rt2800_rfcsr_write(rt2x00dev
, 45, 0xa2);
6103 rt2800_rfcsr_write(rt2x00dev
, 46, 0x73);
6104 rt2800_rfcsr_write(rt2x00dev
, 47, 0x00);
6105 rt2800_rfcsr_write(rt2x00dev
, 48, 0x10);
6106 rt2800_rfcsr_write(rt2x00dev
, 49, 0x98);
6107 rt2800_rfcsr_write(rt2x00dev
, 52, 0x38);
6108 rt2800_rfcsr_write(rt2x00dev
, 53, 0x00);
6109 rt2800_rfcsr_write(rt2x00dev
, 54, 0x78);
6110 rt2800_rfcsr_write(rt2x00dev
, 55, 0x43);
6111 rt2800_rfcsr_write(rt2x00dev
, 56, 0x02);
6112 rt2800_rfcsr_write(rt2x00dev
, 57, 0x80);
6113 rt2800_rfcsr_write(rt2x00dev
, 58, 0x7f);
6114 rt2800_rfcsr_write(rt2x00dev
, 59, 0x09);
6115 rt2800_rfcsr_write(rt2x00dev
, 60, 0x45);
6116 rt2800_rfcsr_write(rt2x00dev
, 61, 0xc1);
6118 rt2800_rfcsr_read(rt2x00dev
, 29, &rfcsr
);
6119 rt2x00_set_field8(&rfcsr
, RFCSR29_RSSI_GAIN
, 3);
6120 rt2800_rfcsr_write(rt2x00dev
, 29, rfcsr
);
6122 rt2800_led_open_drain_enable(rt2x00dev
);
6123 rt2800_normal_mode_setup_3xxx(rt2x00dev
);
6126 static void rt2800_init_rfcsr_3352(struct rt2x00_dev
*rt2x00dev
)
6128 rt2800_rf_init_calibration(rt2x00dev
, 30);
6130 rt2800_rfcsr_write(rt2x00dev
, 0, 0xf0);
6131 rt2800_rfcsr_write(rt2x00dev
, 1, 0x23);
6132 rt2800_rfcsr_write(rt2x00dev
, 2, 0x50);
6133 rt2800_rfcsr_write(rt2x00dev
, 3, 0x18);
6134 rt2800_rfcsr_write(rt2x00dev
, 4, 0x00);
6135 rt2800_rfcsr_write(rt2x00dev
, 5, 0x00);
6136 rt2800_rfcsr_write(rt2x00dev
, 6, 0x33);
6137 rt2800_rfcsr_write(rt2x00dev
, 7, 0x00);
6138 rt2800_rfcsr_write(rt2x00dev
, 8, 0xf1);
6139 rt2800_rfcsr_write(rt2x00dev
, 9, 0x02);
6140 rt2800_rfcsr_write(rt2x00dev
, 10, 0xd2);
6141 rt2800_rfcsr_write(rt2x00dev
, 11, 0x42);
6142 rt2800_rfcsr_write(rt2x00dev
, 12, 0x1c);
6143 rt2800_rfcsr_write(rt2x00dev
, 13, 0x00);
6144 rt2800_rfcsr_write(rt2x00dev
, 14, 0x5a);
6145 rt2800_rfcsr_write(rt2x00dev
, 15, 0x00);
6146 rt2800_rfcsr_write(rt2x00dev
, 16, 0x01);
6147 rt2800_rfcsr_write(rt2x00dev
, 18, 0x45);
6148 rt2800_rfcsr_write(rt2x00dev
, 19, 0x02);
6149 rt2800_rfcsr_write(rt2x00dev
, 20, 0x00);
6150 rt2800_rfcsr_write(rt2x00dev
, 21, 0x00);
6151 rt2800_rfcsr_write(rt2x00dev
, 22, 0x00);
6152 rt2800_rfcsr_write(rt2x00dev
, 23, 0x00);
6153 rt2800_rfcsr_write(rt2x00dev
, 24, 0x00);
6154 rt2800_rfcsr_write(rt2x00dev
, 25, 0x80);
6155 rt2800_rfcsr_write(rt2x00dev
, 26, 0x00);
6156 rt2800_rfcsr_write(rt2x00dev
, 27, 0x03);
6157 rt2800_rfcsr_write(rt2x00dev
, 28, 0x03);
6158 rt2800_rfcsr_write(rt2x00dev
, 29, 0x00);
6159 rt2800_rfcsr_write(rt2x00dev
, 30, 0x10);
6160 rt2800_rfcsr_write(rt2x00dev
, 31, 0x80);
6161 rt2800_rfcsr_write(rt2x00dev
, 32, 0x80);
6162 rt2800_rfcsr_write(rt2x00dev
, 33, 0x00);
6163 rt2800_rfcsr_write(rt2x00dev
, 34, 0x01);
6164 rt2800_rfcsr_write(rt2x00dev
, 35, 0x03);
6165 rt2800_rfcsr_write(rt2x00dev
, 36, 0xbd);
6166 rt2800_rfcsr_write(rt2x00dev
, 37, 0x3c);
6167 rt2800_rfcsr_write(rt2x00dev
, 38, 0x5f);
6168 rt2800_rfcsr_write(rt2x00dev
, 39, 0xc5);
6169 rt2800_rfcsr_write(rt2x00dev
, 40, 0x33);
6170 rt2800_rfcsr_write(rt2x00dev
, 41, 0x5b);
6171 rt2800_rfcsr_write(rt2x00dev
, 42, 0x5b);
6172 rt2800_rfcsr_write(rt2x00dev
, 43, 0xdb);
6173 rt2800_rfcsr_write(rt2x00dev
, 44, 0xdb);
6174 rt2800_rfcsr_write(rt2x00dev
, 45, 0xdb);
6175 rt2800_rfcsr_write(rt2x00dev
, 46, 0xdd);
6176 rt2800_rfcsr_write(rt2x00dev
, 47, 0x0d);
6177 rt2800_rfcsr_write(rt2x00dev
, 48, 0x14);
6178 rt2800_rfcsr_write(rt2x00dev
, 49, 0x00);
6179 rt2800_rfcsr_write(rt2x00dev
, 50, 0x2d);
6180 rt2800_rfcsr_write(rt2x00dev
, 51, 0x7f);
6181 rt2800_rfcsr_write(rt2x00dev
, 52, 0x00);
6182 rt2800_rfcsr_write(rt2x00dev
, 53, 0x52);
6183 rt2800_rfcsr_write(rt2x00dev
, 54, 0x1b);
6184 rt2800_rfcsr_write(rt2x00dev
, 55, 0x7f);
6185 rt2800_rfcsr_write(rt2x00dev
, 56, 0x00);
6186 rt2800_rfcsr_write(rt2x00dev
, 57, 0x52);
6187 rt2800_rfcsr_write(rt2x00dev
, 58, 0x1b);
6188 rt2800_rfcsr_write(rt2x00dev
, 59, 0x00);
6189 rt2800_rfcsr_write(rt2x00dev
, 60, 0x00);
6190 rt2800_rfcsr_write(rt2x00dev
, 61, 0x00);
6191 rt2800_rfcsr_write(rt2x00dev
, 62, 0x00);
6192 rt2800_rfcsr_write(rt2x00dev
, 63, 0x00);
6194 rt2800_rx_filter_calibration(rt2x00dev
);
6195 rt2800_led_open_drain_enable(rt2x00dev
);
6196 rt2800_normal_mode_setup_3xxx(rt2x00dev
);
6199 static void rt2800_init_rfcsr_3390(struct rt2x00_dev
*rt2x00dev
)
6203 rt2800_rf_init_calibration(rt2x00dev
, 30);
6205 rt2800_rfcsr_write(rt2x00dev
, 0, 0xa0);
6206 rt2800_rfcsr_write(rt2x00dev
, 1, 0xe1);
6207 rt2800_rfcsr_write(rt2x00dev
, 2, 0xf1);
6208 rt2800_rfcsr_write(rt2x00dev
, 3, 0x62);
6209 rt2800_rfcsr_write(rt2x00dev
, 4, 0x40);
6210 rt2800_rfcsr_write(rt2x00dev
, 5, 0x8b);
6211 rt2800_rfcsr_write(rt2x00dev
, 6, 0x42);
6212 rt2800_rfcsr_write(rt2x00dev
, 7, 0x34);
6213 rt2800_rfcsr_write(rt2x00dev
, 8, 0x00);
6214 rt2800_rfcsr_write(rt2x00dev
, 9, 0xc0);
6215 rt2800_rfcsr_write(rt2x00dev
, 10, 0x61);
6216 rt2800_rfcsr_write(rt2x00dev
, 11, 0x21);
6217 rt2800_rfcsr_write(rt2x00dev
, 12, 0x3b);
6218 rt2800_rfcsr_write(rt2x00dev
, 13, 0xe0);
6219 rt2800_rfcsr_write(rt2x00dev
, 14, 0x90);
6220 rt2800_rfcsr_write(rt2x00dev
, 15, 0x53);
6221 rt2800_rfcsr_write(rt2x00dev
, 16, 0xe0);
6222 rt2800_rfcsr_write(rt2x00dev
, 17, 0x94);
6223 rt2800_rfcsr_write(rt2x00dev
, 18, 0x5c);
6224 rt2800_rfcsr_write(rt2x00dev
, 19, 0x4a);
6225 rt2800_rfcsr_write(rt2x00dev
, 20, 0xb2);
6226 rt2800_rfcsr_write(rt2x00dev
, 21, 0xf6);
6227 rt2800_rfcsr_write(rt2x00dev
, 22, 0x00);
6228 rt2800_rfcsr_write(rt2x00dev
, 23, 0x14);
6229 rt2800_rfcsr_write(rt2x00dev
, 24, 0x08);
6230 rt2800_rfcsr_write(rt2x00dev
, 25, 0x3d);
6231 rt2800_rfcsr_write(rt2x00dev
, 26, 0x85);
6232 rt2800_rfcsr_write(rt2x00dev
, 27, 0x00);
6233 rt2800_rfcsr_write(rt2x00dev
, 28, 0x41);
6234 rt2800_rfcsr_write(rt2x00dev
, 29, 0x8f);
6235 rt2800_rfcsr_write(rt2x00dev
, 30, 0x20);
6236 rt2800_rfcsr_write(rt2x00dev
, 31, 0x0f);
6238 rt2800_register_read(rt2x00dev
, GPIO_SWITCH
, ®
);
6239 rt2x00_set_field32(®
, GPIO_SWITCH_5
, 0);
6240 rt2800_register_write(rt2x00dev
, GPIO_SWITCH
, reg
);
6242 rt2800_rx_filter_calibration(rt2x00dev
);
6244 if (rt2x00_rt_rev_lt(rt2x00dev
, RT3390
, REV_RT3390E
))
6245 rt2800_rfcsr_write(rt2x00dev
, 27, 0x03);
6247 rt2800_led_open_drain_enable(rt2x00dev
);
6248 rt2800_normal_mode_setup_3xxx(rt2x00dev
);
6251 static void rt2800_init_rfcsr_3572(struct rt2x00_dev
*rt2x00dev
)
6256 rt2800_rf_init_calibration(rt2x00dev
, 30);
6258 rt2800_rfcsr_write(rt2x00dev
, 0, 0x70);
6259 rt2800_rfcsr_write(rt2x00dev
, 1, 0x81);
6260 rt2800_rfcsr_write(rt2x00dev
, 2, 0xf1);
6261 rt2800_rfcsr_write(rt2x00dev
, 3, 0x02);
6262 rt2800_rfcsr_write(rt2x00dev
, 4, 0x4c);
6263 rt2800_rfcsr_write(rt2x00dev
, 5, 0x05);
6264 rt2800_rfcsr_write(rt2x00dev
, 6, 0x4a);
6265 rt2800_rfcsr_write(rt2x00dev
, 7, 0xd8);
6266 rt2800_rfcsr_write(rt2x00dev
, 9, 0xc3);
6267 rt2800_rfcsr_write(rt2x00dev
, 10, 0xf1);
6268 rt2800_rfcsr_write(rt2x00dev
, 11, 0xb9);
6269 rt2800_rfcsr_write(rt2x00dev
, 12, 0x70);
6270 rt2800_rfcsr_write(rt2x00dev
, 13, 0x65);
6271 rt2800_rfcsr_write(rt2x00dev
, 14, 0xa0);
6272 rt2800_rfcsr_write(rt2x00dev
, 15, 0x53);
6273 rt2800_rfcsr_write(rt2x00dev
, 16, 0x4c);
6274 rt2800_rfcsr_write(rt2x00dev
, 17, 0x23);
6275 rt2800_rfcsr_write(rt2x00dev
, 18, 0xac);
6276 rt2800_rfcsr_write(rt2x00dev
, 19, 0x93);
6277 rt2800_rfcsr_write(rt2x00dev
, 20, 0xb3);
6278 rt2800_rfcsr_write(rt2x00dev
, 21, 0xd0);
6279 rt2800_rfcsr_write(rt2x00dev
, 22, 0x00);
6280 rt2800_rfcsr_write(rt2x00dev
, 23, 0x3c);
6281 rt2800_rfcsr_write(rt2x00dev
, 24, 0x16);
6282 rt2800_rfcsr_write(rt2x00dev
, 25, 0x15);
6283 rt2800_rfcsr_write(rt2x00dev
, 26, 0x85);
6284 rt2800_rfcsr_write(rt2x00dev
, 27, 0x00);
6285 rt2800_rfcsr_write(rt2x00dev
, 28, 0x00);
6286 rt2800_rfcsr_write(rt2x00dev
, 29, 0x9b);
6287 rt2800_rfcsr_write(rt2x00dev
, 30, 0x09);
6288 rt2800_rfcsr_write(rt2x00dev
, 31, 0x10);
6290 rt2800_rfcsr_read(rt2x00dev
, 6, &rfcsr
);
6291 rt2x00_set_field8(&rfcsr
, RFCSR6_R2
, 1);
6292 rt2800_rfcsr_write(rt2x00dev
, 6, rfcsr
);
6294 rt2800_register_read(rt2x00dev
, LDO_CFG0
, ®
);
6295 rt2x00_set_field32(®
, LDO_CFG0_LDO_CORE_VLEVEL
, 3);
6296 rt2x00_set_field32(®
, LDO_CFG0_BGSEL
, 1);
6297 rt2800_register_write(rt2x00dev
, LDO_CFG0
, reg
);
6299 rt2800_register_read(rt2x00dev
, LDO_CFG0
, ®
);
6300 rt2x00_set_field32(®
, LDO_CFG0_LDO_CORE_VLEVEL
, 0);
6301 rt2x00_set_field32(®
, LDO_CFG0_BGSEL
, 1);
6302 rt2800_register_write(rt2x00dev
, LDO_CFG0
, reg
);
6304 rt2800_rx_filter_calibration(rt2x00dev
);
6305 rt2800_led_open_drain_enable(rt2x00dev
);
6306 rt2800_normal_mode_setup_3xxx(rt2x00dev
);
6309 static void rt3593_post_bbp_init(struct rt2x00_dev
*rt2x00dev
)
6312 bool txbf_enabled
= false; /* FIXME */
6314 rt2800_bbp_read(rt2x00dev
, 105, &bbp
);
6315 if (rt2x00dev
->default_ant
.rx_chain_num
== 1)
6316 rt2x00_set_field8(&bbp
, BBP105_MLD
, 0);
6318 rt2x00_set_field8(&bbp
, BBP105_MLD
, 1);
6319 rt2800_bbp_write(rt2x00dev
, 105, bbp
);
6321 rt2800_bbp4_mac_if_ctrl(rt2x00dev
);
6323 rt2800_bbp_write(rt2x00dev
, 92, 0x02);
6324 rt2800_bbp_write(rt2x00dev
, 82, 0x82);
6325 rt2800_bbp_write(rt2x00dev
, 106, 0x05);
6326 rt2800_bbp_write(rt2x00dev
, 104, 0x92);
6327 rt2800_bbp_write(rt2x00dev
, 88, 0x90);
6328 rt2800_bbp_write(rt2x00dev
, 148, 0xc8);
6329 rt2800_bbp_write(rt2x00dev
, 47, 0x48);
6330 rt2800_bbp_write(rt2x00dev
, 120, 0x50);
6333 rt2800_bbp_write(rt2x00dev
, 163, 0xbd);
6335 rt2800_bbp_write(rt2x00dev
, 163, 0x9d);
6338 rt2800_bbp_write(rt2x00dev
, 142, 6);
6339 rt2800_bbp_write(rt2x00dev
, 143, 160);
6340 rt2800_bbp_write(rt2x00dev
, 142, 7);
6341 rt2800_bbp_write(rt2x00dev
, 143, 161);
6342 rt2800_bbp_write(rt2x00dev
, 142, 8);
6343 rt2800_bbp_write(rt2x00dev
, 143, 162);
6345 /* ADC/DAC control */
6346 rt2800_bbp_write(rt2x00dev
, 31, 0x08);
6348 /* RX AGC energy lower bound in log2 */
6349 rt2800_bbp_write(rt2x00dev
, 68, 0x0b);
6351 /* FIXME: BBP 105 owerwrite? */
6352 rt2800_bbp_write(rt2x00dev
, 105, 0x04);
6356 static void rt2800_init_rfcsr_3593(struct rt2x00_dev
*rt2x00dev
)
6358 struct rt2800_drv_data
*drv_data
= rt2x00dev
->drv_data
;
6362 /* Disable GPIO #4 and #7 function for LAN PE control */
6363 rt2800_register_read(rt2x00dev
, GPIO_SWITCH
, ®
);
6364 rt2x00_set_field32(®
, GPIO_SWITCH_4
, 0);
6365 rt2x00_set_field32(®
, GPIO_SWITCH_7
, 0);
6366 rt2800_register_write(rt2x00dev
, GPIO_SWITCH
, reg
);
6368 /* Initialize default register values */
6369 rt2800_rfcsr_write(rt2x00dev
, 1, 0x03);
6370 rt2800_rfcsr_write(rt2x00dev
, 3, 0x80);
6371 rt2800_rfcsr_write(rt2x00dev
, 5, 0x00);
6372 rt2800_rfcsr_write(rt2x00dev
, 6, 0x40);
6373 rt2800_rfcsr_write(rt2x00dev
, 8, 0xf1);
6374 rt2800_rfcsr_write(rt2x00dev
, 9, 0x02);
6375 rt2800_rfcsr_write(rt2x00dev
, 10, 0xd3);
6376 rt2800_rfcsr_write(rt2x00dev
, 11, 0x40);
6377 rt2800_rfcsr_write(rt2x00dev
, 12, 0x4e);
6378 rt2800_rfcsr_write(rt2x00dev
, 13, 0x12);
6379 rt2800_rfcsr_write(rt2x00dev
, 18, 0x40);
6380 rt2800_rfcsr_write(rt2x00dev
, 22, 0x20);
6381 rt2800_rfcsr_write(rt2x00dev
, 30, 0x10);
6382 rt2800_rfcsr_write(rt2x00dev
, 31, 0x80);
6383 rt2800_rfcsr_write(rt2x00dev
, 32, 0x78);
6384 rt2800_rfcsr_write(rt2x00dev
, 33, 0x3b);
6385 rt2800_rfcsr_write(rt2x00dev
, 34, 0x3c);
6386 rt2800_rfcsr_write(rt2x00dev
, 35, 0xe0);
6387 rt2800_rfcsr_write(rt2x00dev
, 38, 0x86);
6388 rt2800_rfcsr_write(rt2x00dev
, 39, 0x23);
6389 rt2800_rfcsr_write(rt2x00dev
, 44, 0xd3);
6390 rt2800_rfcsr_write(rt2x00dev
, 45, 0xbb);
6391 rt2800_rfcsr_write(rt2x00dev
, 46, 0x60);
6392 rt2800_rfcsr_write(rt2x00dev
, 49, 0x8e);
6393 rt2800_rfcsr_write(rt2x00dev
, 50, 0x86);
6394 rt2800_rfcsr_write(rt2x00dev
, 51, 0x75);
6395 rt2800_rfcsr_write(rt2x00dev
, 52, 0x45);
6396 rt2800_rfcsr_write(rt2x00dev
, 53, 0x18);
6397 rt2800_rfcsr_write(rt2x00dev
, 54, 0x18);
6398 rt2800_rfcsr_write(rt2x00dev
, 55, 0x18);
6399 rt2800_rfcsr_write(rt2x00dev
, 56, 0xdb);
6400 rt2800_rfcsr_write(rt2x00dev
, 57, 0x6e);
6402 /* Initiate calibration */
6403 /* TODO: use rt2800_rf_init_calibration ? */
6404 rt2800_rfcsr_read(rt2x00dev
, 2, &rfcsr
);
6405 rt2x00_set_field8(&rfcsr
, RFCSR2_RESCAL_EN
, 1);
6406 rt2800_rfcsr_write(rt2x00dev
, 2, rfcsr
);
6408 rt2800_adjust_freq_offset(rt2x00dev
);
6410 rt2800_rfcsr_read(rt2x00dev
, 18, &rfcsr
);
6411 rt2x00_set_field8(&rfcsr
, RFCSR18_XO_TUNE_BYPASS
, 1);
6412 rt2800_rfcsr_write(rt2x00dev
, 18, rfcsr
);
6414 rt2800_register_read(rt2x00dev
, LDO_CFG0
, ®
);
6415 rt2x00_set_field32(®
, LDO_CFG0_LDO_CORE_VLEVEL
, 3);
6416 rt2x00_set_field32(®
, LDO_CFG0_BGSEL
, 1);
6417 rt2800_register_write(rt2x00dev
, LDO_CFG0
, reg
);
6418 usleep_range(1000, 1500);
6419 rt2800_register_read(rt2x00dev
, LDO_CFG0
, ®
);
6420 rt2x00_set_field32(®
, LDO_CFG0_LDO_CORE_VLEVEL
, 0);
6421 rt2800_register_write(rt2x00dev
, LDO_CFG0
, reg
);
6423 /* Set initial values for RX filter calibration */
6424 drv_data
->calibration_bw20
= 0x1f;
6425 drv_data
->calibration_bw40
= 0x2f;
6427 /* Save BBP 25 & 26 values for later use in channel switching */
6428 rt2800_bbp_read(rt2x00dev
, 25, &drv_data
->bbp25
);
6429 rt2800_bbp_read(rt2x00dev
, 26, &drv_data
->bbp26
);
6431 rt2800_led_open_drain_enable(rt2x00dev
);
6432 rt2800_normal_mode_setup_3593(rt2x00dev
);
6434 rt3593_post_bbp_init(rt2x00dev
);
6436 /* TODO: enable stream mode support */
6439 static void rt2800_init_rfcsr_5390(struct rt2x00_dev
*rt2x00dev
)
6441 rt2800_rf_init_calibration(rt2x00dev
, 2);
6443 rt2800_rfcsr_write(rt2x00dev
, 1, 0x0f);
6444 rt2800_rfcsr_write(rt2x00dev
, 2, 0x80);
6445 rt2800_rfcsr_write(rt2x00dev
, 3, 0x88);
6446 rt2800_rfcsr_write(rt2x00dev
, 5, 0x10);
6447 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390F
))
6448 rt2800_rfcsr_write(rt2x00dev
, 6, 0xe0);
6450 rt2800_rfcsr_write(rt2x00dev
, 6, 0xa0);
6451 rt2800_rfcsr_write(rt2x00dev
, 7, 0x00);
6452 rt2800_rfcsr_write(rt2x00dev
, 10, 0x53);
6453 rt2800_rfcsr_write(rt2x00dev
, 11, 0x4a);
6454 rt2800_rfcsr_write(rt2x00dev
, 12, 0x46);
6455 rt2800_rfcsr_write(rt2x00dev
, 13, 0x9f);
6456 rt2800_rfcsr_write(rt2x00dev
, 14, 0x00);
6457 rt2800_rfcsr_write(rt2x00dev
, 15, 0x00);
6458 rt2800_rfcsr_write(rt2x00dev
, 16, 0x00);
6459 rt2800_rfcsr_write(rt2x00dev
, 18, 0x03);
6460 rt2800_rfcsr_write(rt2x00dev
, 19, 0x00);
6462 rt2800_rfcsr_write(rt2x00dev
, 20, 0x00);
6463 rt2800_rfcsr_write(rt2x00dev
, 21, 0x00);
6464 rt2800_rfcsr_write(rt2x00dev
, 22, 0x20);
6465 rt2800_rfcsr_write(rt2x00dev
, 23, 0x00);
6466 rt2800_rfcsr_write(rt2x00dev
, 24, 0x00);
6467 if (rt2x00_is_usb(rt2x00dev
) &&
6468 rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390F
))
6469 rt2800_rfcsr_write(rt2x00dev
, 25, 0x80);
6471 rt2800_rfcsr_write(rt2x00dev
, 25, 0xc0);
6472 rt2800_rfcsr_write(rt2x00dev
, 26, 0x00);
6473 rt2800_rfcsr_write(rt2x00dev
, 27, 0x09);
6474 rt2800_rfcsr_write(rt2x00dev
, 28, 0x00);
6475 rt2800_rfcsr_write(rt2x00dev
, 29, 0x10);
6477 rt2800_rfcsr_write(rt2x00dev
, 30, 0x10);
6478 rt2800_rfcsr_write(rt2x00dev
, 31, 0x80);
6479 rt2800_rfcsr_write(rt2x00dev
, 32, 0x80);
6480 rt2800_rfcsr_write(rt2x00dev
, 33, 0x00);
6481 rt2800_rfcsr_write(rt2x00dev
, 34, 0x07);
6482 rt2800_rfcsr_write(rt2x00dev
, 35, 0x12);
6483 rt2800_rfcsr_write(rt2x00dev
, 36, 0x00);
6484 rt2800_rfcsr_write(rt2x00dev
, 37, 0x08);
6485 rt2800_rfcsr_write(rt2x00dev
, 38, 0x85);
6486 rt2800_rfcsr_write(rt2x00dev
, 39, 0x1b);
6488 rt2800_rfcsr_write(rt2x00dev
, 40, 0x0b);
6489 rt2800_rfcsr_write(rt2x00dev
, 41, 0xbb);
6490 rt2800_rfcsr_write(rt2x00dev
, 42, 0xd2);
6491 rt2800_rfcsr_write(rt2x00dev
, 43, 0x9a);
6492 rt2800_rfcsr_write(rt2x00dev
, 44, 0x0e);
6493 rt2800_rfcsr_write(rt2x00dev
, 45, 0xa2);
6494 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390F
))
6495 rt2800_rfcsr_write(rt2x00dev
, 46, 0x73);
6497 rt2800_rfcsr_write(rt2x00dev
, 46, 0x7b);
6498 rt2800_rfcsr_write(rt2x00dev
, 47, 0x00);
6499 rt2800_rfcsr_write(rt2x00dev
, 48, 0x10);
6500 rt2800_rfcsr_write(rt2x00dev
, 49, 0x94);
6502 rt2800_rfcsr_write(rt2x00dev
, 52, 0x38);
6503 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390F
))
6504 rt2800_rfcsr_write(rt2x00dev
, 53, 0x00);
6506 rt2800_rfcsr_write(rt2x00dev
, 53, 0x84);
6507 rt2800_rfcsr_write(rt2x00dev
, 54, 0x78);
6508 rt2800_rfcsr_write(rt2x00dev
, 55, 0x44);
6509 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390F
))
6510 rt2800_rfcsr_write(rt2x00dev
, 56, 0x42);
6512 rt2800_rfcsr_write(rt2x00dev
, 56, 0x22);
6513 rt2800_rfcsr_write(rt2x00dev
, 57, 0x80);
6514 rt2800_rfcsr_write(rt2x00dev
, 58, 0x7f);
6515 rt2800_rfcsr_write(rt2x00dev
, 59, 0x8f);
6517 rt2800_rfcsr_write(rt2x00dev
, 60, 0x45);
6518 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390F
)) {
6519 if (rt2x00_is_usb(rt2x00dev
))
6520 rt2800_rfcsr_write(rt2x00dev
, 61, 0xd1);
6522 rt2800_rfcsr_write(rt2x00dev
, 61, 0xd5);
6524 if (rt2x00_is_usb(rt2x00dev
))
6525 rt2800_rfcsr_write(rt2x00dev
, 61, 0xdd);
6527 rt2800_rfcsr_write(rt2x00dev
, 61, 0xb5);
6529 rt2800_rfcsr_write(rt2x00dev
, 62, 0x00);
6530 rt2800_rfcsr_write(rt2x00dev
, 63, 0x00);
6532 rt2800_normal_mode_setup_5xxx(rt2x00dev
);
6534 rt2800_led_open_drain_enable(rt2x00dev
);
6537 static void rt2800_init_rfcsr_5392(struct rt2x00_dev
*rt2x00dev
)
6539 rt2800_rf_init_calibration(rt2x00dev
, 2);
6541 rt2800_rfcsr_write(rt2x00dev
, 1, 0x17);
6542 rt2800_rfcsr_write(rt2x00dev
, 3, 0x88);
6543 rt2800_rfcsr_write(rt2x00dev
, 5, 0x10);
6544 rt2800_rfcsr_write(rt2x00dev
, 6, 0xe0);
6545 rt2800_rfcsr_write(rt2x00dev
, 7, 0x00);
6546 rt2800_rfcsr_write(rt2x00dev
, 10, 0x53);
6547 rt2800_rfcsr_write(rt2x00dev
, 11, 0x4a);
6548 rt2800_rfcsr_write(rt2x00dev
, 12, 0x46);
6549 rt2800_rfcsr_write(rt2x00dev
, 13, 0x9f);
6550 rt2800_rfcsr_write(rt2x00dev
, 14, 0x00);
6551 rt2800_rfcsr_write(rt2x00dev
, 15, 0x00);
6552 rt2800_rfcsr_write(rt2x00dev
, 16, 0x00);
6553 rt2800_rfcsr_write(rt2x00dev
, 18, 0x03);
6554 rt2800_rfcsr_write(rt2x00dev
, 19, 0x4d);
6555 rt2800_rfcsr_write(rt2x00dev
, 20, 0x00);
6556 rt2800_rfcsr_write(rt2x00dev
, 21, 0x8d);
6557 rt2800_rfcsr_write(rt2x00dev
, 22, 0x20);
6558 rt2800_rfcsr_write(rt2x00dev
, 23, 0x0b);
6559 rt2800_rfcsr_write(rt2x00dev
, 24, 0x44);
6560 rt2800_rfcsr_write(rt2x00dev
, 25, 0x80);
6561 rt2800_rfcsr_write(rt2x00dev
, 26, 0x82);
6562 rt2800_rfcsr_write(rt2x00dev
, 27, 0x09);
6563 rt2800_rfcsr_write(rt2x00dev
, 28, 0x00);
6564 rt2800_rfcsr_write(rt2x00dev
, 29, 0x10);
6565 rt2800_rfcsr_write(rt2x00dev
, 30, 0x10);
6566 rt2800_rfcsr_write(rt2x00dev
, 31, 0x80);
6567 rt2800_rfcsr_write(rt2x00dev
, 32, 0x20);
6568 rt2800_rfcsr_write(rt2x00dev
, 33, 0xC0);
6569 rt2800_rfcsr_write(rt2x00dev
, 34, 0x07);
6570 rt2800_rfcsr_write(rt2x00dev
, 35, 0x12);
6571 rt2800_rfcsr_write(rt2x00dev
, 36, 0x00);
6572 rt2800_rfcsr_write(rt2x00dev
, 37, 0x08);
6573 rt2800_rfcsr_write(rt2x00dev
, 38, 0x89);
6574 rt2800_rfcsr_write(rt2x00dev
, 39, 0x1b);
6575 rt2800_rfcsr_write(rt2x00dev
, 40, 0x0f);
6576 rt2800_rfcsr_write(rt2x00dev
, 41, 0xbb);
6577 rt2800_rfcsr_write(rt2x00dev
, 42, 0xd5);
6578 rt2800_rfcsr_write(rt2x00dev
, 43, 0x9b);
6579 rt2800_rfcsr_write(rt2x00dev
, 44, 0x0e);
6580 rt2800_rfcsr_write(rt2x00dev
, 45, 0xa2);
6581 rt2800_rfcsr_write(rt2x00dev
, 46, 0x73);
6582 rt2800_rfcsr_write(rt2x00dev
, 47, 0x0c);
6583 rt2800_rfcsr_write(rt2x00dev
, 48, 0x10);
6584 rt2800_rfcsr_write(rt2x00dev
, 49, 0x94);
6585 rt2800_rfcsr_write(rt2x00dev
, 50, 0x94);
6586 rt2800_rfcsr_write(rt2x00dev
, 51, 0x3a);
6587 rt2800_rfcsr_write(rt2x00dev
, 52, 0x48);
6588 rt2800_rfcsr_write(rt2x00dev
, 53, 0x44);
6589 rt2800_rfcsr_write(rt2x00dev
, 54, 0x38);
6590 rt2800_rfcsr_write(rt2x00dev
, 55, 0x43);
6591 rt2800_rfcsr_write(rt2x00dev
, 56, 0xa1);
6592 rt2800_rfcsr_write(rt2x00dev
, 57, 0x00);
6593 rt2800_rfcsr_write(rt2x00dev
, 58, 0x39);
6594 rt2800_rfcsr_write(rt2x00dev
, 59, 0x07);
6595 rt2800_rfcsr_write(rt2x00dev
, 60, 0x45);
6596 rt2800_rfcsr_write(rt2x00dev
, 61, 0x91);
6597 rt2800_rfcsr_write(rt2x00dev
, 62, 0x39);
6598 rt2800_rfcsr_write(rt2x00dev
, 63, 0x07);
6600 rt2800_normal_mode_setup_5xxx(rt2x00dev
);
6602 rt2800_led_open_drain_enable(rt2x00dev
);
6605 static void rt2800_init_rfcsr_5592(struct rt2x00_dev
*rt2x00dev
)
6607 rt2800_rf_init_calibration(rt2x00dev
, 30);
6609 rt2800_rfcsr_write(rt2x00dev
, 1, 0x3F);
6610 rt2800_rfcsr_write(rt2x00dev
, 3, 0x08);
6611 rt2800_rfcsr_write(rt2x00dev
, 5, 0x10);
6612 rt2800_rfcsr_write(rt2x00dev
, 6, 0xE4);
6613 rt2800_rfcsr_write(rt2x00dev
, 7, 0x00);
6614 rt2800_rfcsr_write(rt2x00dev
, 14, 0x00);
6615 rt2800_rfcsr_write(rt2x00dev
, 15, 0x00);
6616 rt2800_rfcsr_write(rt2x00dev
, 16, 0x00);
6617 rt2800_rfcsr_write(rt2x00dev
, 18, 0x03);
6618 rt2800_rfcsr_write(rt2x00dev
, 19, 0x4D);
6619 rt2800_rfcsr_write(rt2x00dev
, 20, 0x10);
6620 rt2800_rfcsr_write(rt2x00dev
, 21, 0x8D);
6621 rt2800_rfcsr_write(rt2x00dev
, 26, 0x82);
6622 rt2800_rfcsr_write(rt2x00dev
, 28, 0x00);
6623 rt2800_rfcsr_write(rt2x00dev
, 29, 0x10);
6624 rt2800_rfcsr_write(rt2x00dev
, 33, 0xC0);
6625 rt2800_rfcsr_write(rt2x00dev
, 34, 0x07);
6626 rt2800_rfcsr_write(rt2x00dev
, 35, 0x12);
6627 rt2800_rfcsr_write(rt2x00dev
, 47, 0x0C);
6628 rt2800_rfcsr_write(rt2x00dev
, 53, 0x22);
6629 rt2800_rfcsr_write(rt2x00dev
, 63, 0x07);
6631 rt2800_rfcsr_write(rt2x00dev
, 2, 0x80);
6634 rt2800_adjust_freq_offset(rt2x00dev
);
6636 /* Enable DC filter */
6637 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5592
, REV_RT5592C
))
6638 rt2800_bbp_write(rt2x00dev
, 103, 0xc0);
6640 rt2800_normal_mode_setup_5xxx(rt2x00dev
);
6642 if (rt2x00_rt_rev_lt(rt2x00dev
, RT5592
, REV_RT5592C
))
6643 rt2800_rfcsr_write(rt2x00dev
, 27, 0x03);
6645 rt2800_led_open_drain_enable(rt2x00dev
);
6648 static void rt2800_init_rfcsr(struct rt2x00_dev
*rt2x00dev
)
6650 if (rt2800_is_305x_soc(rt2x00dev
)) {
6651 rt2800_init_rfcsr_305x_soc(rt2x00dev
);
6655 switch (rt2x00dev
->chip
.rt
) {
6659 rt2800_init_rfcsr_30xx(rt2x00dev
);
6662 rt2800_init_rfcsr_3290(rt2x00dev
);
6665 rt2800_init_rfcsr_3352(rt2x00dev
);
6668 rt2800_init_rfcsr_3390(rt2x00dev
);
6671 rt2800_init_rfcsr_3572(rt2x00dev
);
6674 rt2800_init_rfcsr_3593(rt2x00dev
);
6677 rt2800_init_rfcsr_5390(rt2x00dev
);
6680 rt2800_init_rfcsr_5392(rt2x00dev
);
6683 rt2800_init_rfcsr_5592(rt2x00dev
);
6688 int rt2800_enable_radio(struct rt2x00_dev
*rt2x00dev
)
6694 * Initialize MAC registers.
6696 if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev
) ||
6697 rt2800_init_registers(rt2x00dev
)))
6701 * Wait BBP/RF to wake up.
6703 if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev
)))
6707 * Send signal during boot time to initialize firmware.
6709 rt2800_register_write(rt2x00dev
, H2M_BBP_AGENT
, 0);
6710 rt2800_register_write(rt2x00dev
, H2M_MAILBOX_CSR
, 0);
6711 if (rt2x00_is_usb(rt2x00dev
))
6712 rt2800_register_write(rt2x00dev
, H2M_INT_SRC
, 0);
6713 rt2800_mcu_request(rt2x00dev
, MCU_BOOT_SIGNAL
, 0, 0, 0);
6717 * Make sure BBP is up and running.
6719 if (unlikely(rt2800_wait_bbp_ready(rt2x00dev
)))
6723 * Initialize BBP/RF registers.
6725 rt2800_init_bbp(rt2x00dev
);
6726 rt2800_init_rfcsr(rt2x00dev
);
6728 if (rt2x00_is_usb(rt2x00dev
) &&
6729 (rt2x00_rt(rt2x00dev
, RT3070
) ||
6730 rt2x00_rt(rt2x00dev
, RT3071
) ||
6731 rt2x00_rt(rt2x00dev
, RT3572
))) {
6733 rt2800_mcu_request(rt2x00dev
, MCU_CURRENT
, 0, 0, 0);
6740 rt2800_register_read(rt2x00dev
, MAC_SYS_CTRL
, ®
);
6741 rt2x00_set_field32(®
, MAC_SYS_CTRL_ENABLE_TX
, 1);
6742 rt2x00_set_field32(®
, MAC_SYS_CTRL_ENABLE_RX
, 0);
6743 rt2800_register_write(rt2x00dev
, MAC_SYS_CTRL
, reg
);
6747 rt2800_register_read(rt2x00dev
, WPDMA_GLO_CFG
, ®
);
6748 rt2x00_set_field32(®
, WPDMA_GLO_CFG_ENABLE_TX_DMA
, 1);
6749 rt2x00_set_field32(®
, WPDMA_GLO_CFG_ENABLE_RX_DMA
, 1);
6750 rt2x00_set_field32(®
, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE
, 2);
6751 rt2x00_set_field32(®
, WPDMA_GLO_CFG_TX_WRITEBACK_DONE
, 1);
6752 rt2800_register_write(rt2x00dev
, WPDMA_GLO_CFG
, reg
);
6754 rt2800_register_read(rt2x00dev
, MAC_SYS_CTRL
, ®
);
6755 rt2x00_set_field32(®
, MAC_SYS_CTRL_ENABLE_TX
, 1);
6756 rt2x00_set_field32(®
, MAC_SYS_CTRL_ENABLE_RX
, 1);
6757 rt2800_register_write(rt2x00dev
, MAC_SYS_CTRL
, reg
);
6760 * Initialize LED control
6762 rt2800_eeprom_read(rt2x00dev
, EEPROM_LED_AG_CONF
, &word
);
6763 rt2800_mcu_request(rt2x00dev
, MCU_LED_AG_CONF
, 0xff,
6764 word
& 0xff, (word
>> 8) & 0xff);
6766 rt2800_eeprom_read(rt2x00dev
, EEPROM_LED_ACT_CONF
, &word
);
6767 rt2800_mcu_request(rt2x00dev
, MCU_LED_ACT_CONF
, 0xff,
6768 word
& 0xff, (word
>> 8) & 0xff);
6770 rt2800_eeprom_read(rt2x00dev
, EEPROM_LED_POLARITY
, &word
);
6771 rt2800_mcu_request(rt2x00dev
, MCU_LED_LED_POLARITY
, 0xff,
6772 word
& 0xff, (word
>> 8) & 0xff);
6776 EXPORT_SYMBOL_GPL(rt2800_enable_radio
);
6778 void rt2800_disable_radio(struct rt2x00_dev
*rt2x00dev
)
6782 rt2800_disable_wpdma(rt2x00dev
);
6784 /* Wait for DMA, ignore error */
6785 rt2800_wait_wpdma_ready(rt2x00dev
);
6787 rt2800_register_read(rt2x00dev
, MAC_SYS_CTRL
, ®
);
6788 rt2x00_set_field32(®
, MAC_SYS_CTRL_ENABLE_TX
, 0);
6789 rt2x00_set_field32(®
, MAC_SYS_CTRL_ENABLE_RX
, 0);
6790 rt2800_register_write(rt2x00dev
, MAC_SYS_CTRL
, reg
);
6792 EXPORT_SYMBOL_GPL(rt2800_disable_radio
);
6794 int rt2800_efuse_detect(struct rt2x00_dev
*rt2x00dev
)
6799 if (rt2x00_rt(rt2x00dev
, RT3290
))
6800 efuse_ctrl_reg
= EFUSE_CTRL_3290
;
6802 efuse_ctrl_reg
= EFUSE_CTRL
;
6804 rt2800_register_read(rt2x00dev
, efuse_ctrl_reg
, ®
);
6805 return rt2x00_get_field32(reg
, EFUSE_CTRL_PRESENT
);
6807 EXPORT_SYMBOL_GPL(rt2800_efuse_detect
);
6809 static void rt2800_efuse_read(struct rt2x00_dev
*rt2x00dev
, unsigned int i
)
6813 u16 efuse_data0_reg
;
6814 u16 efuse_data1_reg
;
6815 u16 efuse_data2_reg
;
6816 u16 efuse_data3_reg
;
6818 if (rt2x00_rt(rt2x00dev
, RT3290
)) {
6819 efuse_ctrl_reg
= EFUSE_CTRL_3290
;
6820 efuse_data0_reg
= EFUSE_DATA0_3290
;
6821 efuse_data1_reg
= EFUSE_DATA1_3290
;
6822 efuse_data2_reg
= EFUSE_DATA2_3290
;
6823 efuse_data3_reg
= EFUSE_DATA3_3290
;
6825 efuse_ctrl_reg
= EFUSE_CTRL
;
6826 efuse_data0_reg
= EFUSE_DATA0
;
6827 efuse_data1_reg
= EFUSE_DATA1
;
6828 efuse_data2_reg
= EFUSE_DATA2
;
6829 efuse_data3_reg
= EFUSE_DATA3
;
6831 mutex_lock(&rt2x00dev
->csr_mutex
);
6833 rt2800_register_read_lock(rt2x00dev
, efuse_ctrl_reg
, ®
);
6834 rt2x00_set_field32(®
, EFUSE_CTRL_ADDRESS_IN
, i
);
6835 rt2x00_set_field32(®
, EFUSE_CTRL_MODE
, 0);
6836 rt2x00_set_field32(®
, EFUSE_CTRL_KICK
, 1);
6837 rt2800_register_write_lock(rt2x00dev
, efuse_ctrl_reg
, reg
);
6839 /* Wait until the EEPROM has been loaded */
6840 rt2800_regbusy_read(rt2x00dev
, efuse_ctrl_reg
, EFUSE_CTRL_KICK
, ®
);
6841 /* Apparently the data is read from end to start */
6842 rt2800_register_read_lock(rt2x00dev
, efuse_data3_reg
, ®
);
6843 /* The returned value is in CPU order, but eeprom is le */
6844 *(u32
*)&rt2x00dev
->eeprom
[i
] = cpu_to_le32(reg
);
6845 rt2800_register_read_lock(rt2x00dev
, efuse_data2_reg
, ®
);
6846 *(u32
*)&rt2x00dev
->eeprom
[i
+ 2] = cpu_to_le32(reg
);
6847 rt2800_register_read_lock(rt2x00dev
, efuse_data1_reg
, ®
);
6848 *(u32
*)&rt2x00dev
->eeprom
[i
+ 4] = cpu_to_le32(reg
);
6849 rt2800_register_read_lock(rt2x00dev
, efuse_data0_reg
, ®
);
6850 *(u32
*)&rt2x00dev
->eeprom
[i
+ 6] = cpu_to_le32(reg
);
6852 mutex_unlock(&rt2x00dev
->csr_mutex
);
6855 int rt2800_read_eeprom_efuse(struct rt2x00_dev
*rt2x00dev
)
6859 for (i
= 0; i
< EEPROM_SIZE
/ sizeof(u16
); i
+= 8)
6860 rt2800_efuse_read(rt2x00dev
, i
);
6864 EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse
);
6866 static u8
rt2800_get_txmixer_gain_24g(struct rt2x00_dev
*rt2x00dev
)
6870 if (rt2x00_rt(rt2x00dev
, RT3593
))
6873 rt2800_eeprom_read(rt2x00dev
, EEPROM_TXMIXER_GAIN_BG
, &word
);
6874 if ((word
& 0x00ff) != 0x00ff)
6875 return rt2x00_get_field16(word
, EEPROM_TXMIXER_GAIN_BG_VAL
);
6880 static u8
rt2800_get_txmixer_gain_5g(struct rt2x00_dev
*rt2x00dev
)
6884 if (rt2x00_rt(rt2x00dev
, RT3593
))
6887 rt2800_eeprom_read(rt2x00dev
, EEPROM_TXMIXER_GAIN_A
, &word
);
6888 if ((word
& 0x00ff) != 0x00ff)
6889 return rt2x00_get_field16(word
, EEPROM_TXMIXER_GAIN_A_VAL
);
6894 static int rt2800_validate_eeprom(struct rt2x00_dev
*rt2x00dev
)
6896 struct rt2800_drv_data
*drv_data
= rt2x00dev
->drv_data
;
6899 u8 default_lna_gain
;
6905 retval
= rt2800_read_eeprom(rt2x00dev
);
6910 * Start validation of the data that has been read.
6912 mac
= rt2800_eeprom_addr(rt2x00dev
, EEPROM_MAC_ADDR_0
);
6913 if (!is_valid_ether_addr(mac
)) {
6914 eth_random_addr(mac
);
6915 rt2x00_eeprom_dbg(rt2x00dev
, "MAC: %pM\n", mac
);
6918 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF0
, &word
);
6919 if (word
== 0xffff) {
6920 rt2x00_set_field16(&word
, EEPROM_NIC_CONF0_RXPATH
, 2);
6921 rt2x00_set_field16(&word
, EEPROM_NIC_CONF0_TXPATH
, 1);
6922 rt2x00_set_field16(&word
, EEPROM_NIC_CONF0_RF_TYPE
, RF2820
);
6923 rt2800_eeprom_write(rt2x00dev
, EEPROM_NIC_CONF0
, word
);
6924 rt2x00_eeprom_dbg(rt2x00dev
, "Antenna: 0x%04x\n", word
);
6925 } else if (rt2x00_rt(rt2x00dev
, RT2860
) ||
6926 rt2x00_rt(rt2x00dev
, RT2872
)) {
6928 * There is a max of 2 RX streams for RT28x0 series
6930 if (rt2x00_get_field16(word
, EEPROM_NIC_CONF0_RXPATH
) > 2)
6931 rt2x00_set_field16(&word
, EEPROM_NIC_CONF0_RXPATH
, 2);
6932 rt2800_eeprom_write(rt2x00dev
, EEPROM_NIC_CONF0
, word
);
6935 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF1
, &word
);
6936 if (word
== 0xffff) {
6937 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_HW_RADIO
, 0);
6938 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC
, 0);
6939 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G
, 0);
6940 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G
, 0);
6941 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_CARDBUS_ACCEL
, 0);
6942 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_BW40M_SB_2G
, 0);
6943 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_BW40M_SB_5G
, 0);
6944 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_WPS_PBC
, 0);
6945 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_BW40M_2G
, 0);
6946 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_BW40M_5G
, 0);
6947 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_BROADBAND_EXT_LNA
, 0);
6948 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_ANT_DIVERSITY
, 0);
6949 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_INTERNAL_TX_ALC
, 0);
6950 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_BT_COEXIST
, 0);
6951 rt2x00_set_field16(&word
, EEPROM_NIC_CONF1_DAC_TEST
, 0);
6952 rt2800_eeprom_write(rt2x00dev
, EEPROM_NIC_CONF1
, word
);
6953 rt2x00_eeprom_dbg(rt2x00dev
, "NIC: 0x%04x\n", word
);
6956 rt2800_eeprom_read(rt2x00dev
, EEPROM_FREQ
, &word
);
6957 if ((word
& 0x00ff) == 0x00ff) {
6958 rt2x00_set_field16(&word
, EEPROM_FREQ_OFFSET
, 0);
6959 rt2800_eeprom_write(rt2x00dev
, EEPROM_FREQ
, word
);
6960 rt2x00_eeprom_dbg(rt2x00dev
, "Freq: 0x%04x\n", word
);
6962 if ((word
& 0xff00) == 0xff00) {
6963 rt2x00_set_field16(&word
, EEPROM_FREQ_LED_MODE
,
6964 LED_MODE_TXRX_ACTIVITY
);
6965 rt2x00_set_field16(&word
, EEPROM_FREQ_LED_POLARITY
, 0);
6966 rt2800_eeprom_write(rt2x00dev
, EEPROM_FREQ
, word
);
6967 rt2800_eeprom_write(rt2x00dev
, EEPROM_LED_AG_CONF
, 0x5555);
6968 rt2800_eeprom_write(rt2x00dev
, EEPROM_LED_ACT_CONF
, 0x2221);
6969 rt2800_eeprom_write(rt2x00dev
, EEPROM_LED_POLARITY
, 0xa9f8);
6970 rt2x00_eeprom_dbg(rt2x00dev
, "Led Mode: 0x%04x\n", word
);
6974 * During the LNA validation we are going to use
6975 * lna0 as correct value. Note that EEPROM_LNA
6976 * is never validated.
6978 rt2800_eeprom_read(rt2x00dev
, EEPROM_LNA
, &word
);
6979 default_lna_gain
= rt2x00_get_field16(word
, EEPROM_LNA_A0
);
6981 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_BG
, &word
);
6982 if (abs(rt2x00_get_field16(word
, EEPROM_RSSI_BG_OFFSET0
)) > 10)
6983 rt2x00_set_field16(&word
, EEPROM_RSSI_BG_OFFSET0
, 0);
6984 if (abs(rt2x00_get_field16(word
, EEPROM_RSSI_BG_OFFSET1
)) > 10)
6985 rt2x00_set_field16(&word
, EEPROM_RSSI_BG_OFFSET1
, 0);
6986 rt2800_eeprom_write(rt2x00dev
, EEPROM_RSSI_BG
, word
);
6988 drv_data
->txmixer_gain_24g
= rt2800_get_txmixer_gain_24g(rt2x00dev
);
6990 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_BG2
, &word
);
6991 if (abs(rt2x00_get_field16(word
, EEPROM_RSSI_BG2_OFFSET2
)) > 10)
6992 rt2x00_set_field16(&word
, EEPROM_RSSI_BG2_OFFSET2
, 0);
6993 if (!rt2x00_rt(rt2x00dev
, RT3593
)) {
6994 if (rt2x00_get_field16(word
, EEPROM_RSSI_BG2_LNA_A1
) == 0x00 ||
6995 rt2x00_get_field16(word
, EEPROM_RSSI_BG2_LNA_A1
) == 0xff)
6996 rt2x00_set_field16(&word
, EEPROM_RSSI_BG2_LNA_A1
,
6999 rt2800_eeprom_write(rt2x00dev
, EEPROM_RSSI_BG2
, word
);
7001 drv_data
->txmixer_gain_5g
= rt2800_get_txmixer_gain_5g(rt2x00dev
);
7003 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_A
, &word
);
7004 if (abs(rt2x00_get_field16(word
, EEPROM_RSSI_A_OFFSET0
)) > 10)
7005 rt2x00_set_field16(&word
, EEPROM_RSSI_A_OFFSET0
, 0);
7006 if (abs(rt2x00_get_field16(word
, EEPROM_RSSI_A_OFFSET1
)) > 10)
7007 rt2x00_set_field16(&word
, EEPROM_RSSI_A_OFFSET1
, 0);
7008 rt2800_eeprom_write(rt2x00dev
, EEPROM_RSSI_A
, word
);
7010 rt2800_eeprom_read(rt2x00dev
, EEPROM_RSSI_A2
, &word
);
7011 if (abs(rt2x00_get_field16(word
, EEPROM_RSSI_A2_OFFSET2
)) > 10)
7012 rt2x00_set_field16(&word
, EEPROM_RSSI_A2_OFFSET2
, 0);
7013 if (!rt2x00_rt(rt2x00dev
, RT3593
)) {
7014 if (rt2x00_get_field16(word
, EEPROM_RSSI_A2_LNA_A2
) == 0x00 ||
7015 rt2x00_get_field16(word
, EEPROM_RSSI_A2_LNA_A2
) == 0xff)
7016 rt2x00_set_field16(&word
, EEPROM_RSSI_A2_LNA_A2
,
7019 rt2800_eeprom_write(rt2x00dev
, EEPROM_RSSI_A2
, word
);
7021 if (rt2x00_rt(rt2x00dev
, RT3593
)) {
7022 rt2800_eeprom_read(rt2x00dev
, EEPROM_EXT_LNA2
, &word
);
7023 if (rt2x00_get_field16(word
, EEPROM_EXT_LNA2_A1
) == 0x00 ||
7024 rt2x00_get_field16(word
, EEPROM_EXT_LNA2_A1
) == 0xff)
7025 rt2x00_set_field16(&word
, EEPROM_EXT_LNA2_A1
,
7027 if (rt2x00_get_field16(word
, EEPROM_EXT_LNA2_A2
) == 0x00 ||
7028 rt2x00_get_field16(word
, EEPROM_EXT_LNA2_A2
) == 0xff)
7029 rt2x00_set_field16(&word
, EEPROM_EXT_LNA2_A1
,
7031 rt2800_eeprom_write(rt2x00dev
, EEPROM_EXT_LNA2
, word
);
7037 static int rt2800_init_eeprom(struct rt2x00_dev
*rt2x00dev
)
7044 * Read EEPROM word for configuration.
7046 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF0
, &eeprom
);
7049 * Identify RF chipset by EEPROM value
7050 * RT28xx/RT30xx: defined in "EEPROM_NIC_CONF0_RF_TYPE" field
7051 * RT53xx: defined in "EEPROM_CHIP_ID" field
7053 if (rt2x00_rt(rt2x00dev
, RT3290
) ||
7054 rt2x00_rt(rt2x00dev
, RT5390
) ||
7055 rt2x00_rt(rt2x00dev
, RT5392
))
7056 rt2800_eeprom_read(rt2x00dev
, EEPROM_CHIP_ID
, &rf
);
7058 rf
= rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF0_RF_TYPE
);
7083 rt2x00_err(rt2x00dev
, "Invalid RF chipset 0x%04x detected\n",
7088 rt2x00_set_rf(rt2x00dev
, rf
);
7091 * Identify default antenna configuration.
7093 rt2x00dev
->default_ant
.tx_chain_num
=
7094 rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF0_TXPATH
);
7095 rt2x00dev
->default_ant
.rx_chain_num
=
7096 rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF0_RXPATH
);
7098 rt2800_eeprom_read(rt2x00dev
, EEPROM_NIC_CONF1
, &eeprom
);
7100 if (rt2x00_rt(rt2x00dev
, RT3070
) ||
7101 rt2x00_rt(rt2x00dev
, RT3090
) ||
7102 rt2x00_rt(rt2x00dev
, RT3352
) ||
7103 rt2x00_rt(rt2x00dev
, RT3390
)) {
7104 value
= rt2x00_get_field16(eeprom
,
7105 EEPROM_NIC_CONF1_ANT_DIVERSITY
);
7110 rt2x00dev
->default_ant
.tx
= ANTENNA_A
;
7111 rt2x00dev
->default_ant
.rx
= ANTENNA_A
;
7114 rt2x00dev
->default_ant
.tx
= ANTENNA_A
;
7115 rt2x00dev
->default_ant
.rx
= ANTENNA_B
;
7119 rt2x00dev
->default_ant
.tx
= ANTENNA_A
;
7120 rt2x00dev
->default_ant
.rx
= ANTENNA_A
;
7123 if (rt2x00_rt_rev_gte(rt2x00dev
, RT5390
, REV_RT5390R
)) {
7124 rt2x00dev
->default_ant
.tx
= ANTENNA_HW_DIVERSITY
; /* Unused */
7125 rt2x00dev
->default_ant
.rx
= ANTENNA_HW_DIVERSITY
; /* Unused */
7129 * Determine external LNA informations.
7131 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G
))
7132 __set_bit(CAPABILITY_EXTERNAL_LNA_A
, &rt2x00dev
->cap_flags
);
7133 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G
))
7134 __set_bit(CAPABILITY_EXTERNAL_LNA_BG
, &rt2x00dev
->cap_flags
);
7137 * Detect if this device has an hardware controlled radio.
7139 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF1_HW_RADIO
))
7140 __set_bit(CAPABILITY_HW_BUTTON
, &rt2x00dev
->cap_flags
);
7143 * Detect if this device has Bluetooth co-existence.
7145 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_CONF1_BT_COEXIST
))
7146 __set_bit(CAPABILITY_BT_COEXIST
, &rt2x00dev
->cap_flags
);
7149 * Read frequency offset and RF programming sequence.
7151 rt2800_eeprom_read(rt2x00dev
, EEPROM_FREQ
, &eeprom
);
7152 rt2x00dev
->freq_offset
= rt2x00_get_field16(eeprom
, EEPROM_FREQ_OFFSET
);
7155 * Store led settings, for correct led behaviour.
7157 #ifdef CONFIG_RT2X00_LIB_LEDS
7158 rt2800_init_led(rt2x00dev
, &rt2x00dev
->led_radio
, LED_TYPE_RADIO
);
7159 rt2800_init_led(rt2x00dev
, &rt2x00dev
->led_assoc
, LED_TYPE_ASSOC
);
7160 rt2800_init_led(rt2x00dev
, &rt2x00dev
->led_qual
, LED_TYPE_QUALITY
);
7162 rt2x00dev
->led_mcu_reg
= eeprom
;
7163 #endif /* CONFIG_RT2X00_LIB_LEDS */
7166 * Check if support EIRP tx power limit feature.
7168 rt2800_eeprom_read(rt2x00dev
, EEPROM_EIRP_MAX_TX_POWER
, &eeprom
);
7170 if (rt2x00_get_field16(eeprom
, EEPROM_EIRP_MAX_TX_POWER_2GHZ
) <
7171 EIRP_MAX_TX_POWER_LIMIT
)
7172 __set_bit(CAPABILITY_POWER_LIMIT
, &rt2x00dev
->cap_flags
);
7178 * RF value list for rt28xx
7179 * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
7181 static const struct rf_channel rf_vals
[] = {
7182 { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
7183 { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
7184 { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
7185 { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
7186 { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
7187 { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
7188 { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
7189 { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
7190 { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
7191 { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
7192 { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
7193 { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
7194 { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
7195 { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
7197 /* 802.11 UNI / HyperLan 2 */
7198 { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
7199 { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
7200 { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
7201 { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
7202 { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
7203 { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
7204 { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
7205 { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
7206 { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
7207 { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
7208 { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
7209 { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
7211 /* 802.11 HyperLan 2 */
7212 { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
7213 { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
7214 { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
7215 { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
7216 { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
7217 { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
7218 { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
7219 { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
7220 { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
7221 { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
7222 { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
7223 { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
7224 { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
7225 { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
7226 { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
7227 { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
7230 { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
7231 { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
7232 { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
7233 { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
7234 { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
7235 { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
7236 { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
7237 { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
7238 { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
7239 { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
7240 { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
7243 { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
7244 { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
7245 { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
7246 { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
7247 { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
7248 { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
7249 { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
7253 * RF value list for rt3xxx
7254 * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052 & RF3053)
7256 static const struct rf_channel rf_vals_3x
[] = {
7272 /* 802.11 UNI / HyperLan 2 */
7286 /* 802.11 HyperLan 2 */
7318 static const struct rf_channel rf_vals_5592_xtal20
[] = {
7319 /* Channel, N, K, mod, R */
7329 {10, 491, 4, 10, 3},
7330 {11, 492, 4, 10, 3},
7331 {12, 493, 4, 10, 3},
7332 {13, 494, 4, 10, 3},
7333 {14, 496, 8, 10, 3},
7334 {36, 172, 8, 12, 1},
7335 {38, 173, 0, 12, 1},
7336 {40, 173, 4, 12, 1},
7337 {42, 173, 8, 12, 1},
7338 {44, 174, 0, 12, 1},
7339 {46, 174, 4, 12, 1},
7340 {48, 174, 8, 12, 1},
7341 {50, 175, 0, 12, 1},
7342 {52, 175, 4, 12, 1},
7343 {54, 175, 8, 12, 1},
7344 {56, 176, 0, 12, 1},
7345 {58, 176, 4, 12, 1},
7346 {60, 176, 8, 12, 1},
7347 {62, 177, 0, 12, 1},
7348 {64, 177, 4, 12, 1},
7349 {100, 183, 4, 12, 1},
7350 {102, 183, 8, 12, 1},
7351 {104, 184, 0, 12, 1},
7352 {106, 184, 4, 12, 1},
7353 {108, 184, 8, 12, 1},
7354 {110, 185, 0, 12, 1},
7355 {112, 185, 4, 12, 1},
7356 {114, 185, 8, 12, 1},
7357 {116, 186, 0, 12, 1},
7358 {118, 186, 4, 12, 1},
7359 {120, 186, 8, 12, 1},
7360 {122, 187, 0, 12, 1},
7361 {124, 187, 4, 12, 1},
7362 {126, 187, 8, 12, 1},
7363 {128, 188, 0, 12, 1},
7364 {130, 188, 4, 12, 1},
7365 {132, 188, 8, 12, 1},
7366 {134, 189, 0, 12, 1},
7367 {136, 189, 4, 12, 1},
7368 {138, 189, 8, 12, 1},
7369 {140, 190, 0, 12, 1},
7370 {149, 191, 6, 12, 1},
7371 {151, 191, 10, 12, 1},
7372 {153, 192, 2, 12, 1},
7373 {155, 192, 6, 12, 1},
7374 {157, 192, 10, 12, 1},
7375 {159, 193, 2, 12, 1},
7376 {161, 193, 6, 12, 1},
7377 {165, 194, 2, 12, 1},
7378 {184, 164, 0, 12, 1},
7379 {188, 164, 4, 12, 1},
7380 {192, 165, 8, 12, 1},
7381 {196, 166, 0, 12, 1},
7384 static const struct rf_channel rf_vals_5592_xtal40
[] = {
7385 /* Channel, N, K, mod, R */
7395 {10, 245, 7, 10, 3},
7396 {11, 246, 2, 10, 3},
7397 {12, 246, 7, 10, 3},
7398 {13, 247, 2, 10, 3},
7399 {14, 248, 4, 10, 3},
7403 {42, 86, 10, 12, 1},
7409 {54, 87, 10, 12, 1},
7415 {100, 91, 8, 12, 1},
7416 {102, 91, 10, 12, 1},
7417 {104, 92, 0, 12, 1},
7418 {106, 92, 2, 12, 1},
7419 {108, 92, 4, 12, 1},
7420 {110, 92, 6, 12, 1},
7421 {112, 92, 8, 12, 1},
7422 {114, 92, 10, 12, 1},
7423 {116, 93, 0, 12, 1},
7424 {118, 93, 2, 12, 1},
7425 {120, 93, 4, 12, 1},
7426 {122, 93, 6, 12, 1},
7427 {124, 93, 8, 12, 1},
7428 {126, 93, 10, 12, 1},
7429 {128, 94, 0, 12, 1},
7430 {130, 94, 2, 12, 1},
7431 {132, 94, 4, 12, 1},
7432 {134, 94, 6, 12, 1},
7433 {136, 94, 8, 12, 1},
7434 {138, 94, 10, 12, 1},
7435 {140, 95, 0, 12, 1},
7436 {149, 95, 9, 12, 1},
7437 {151, 95, 11, 12, 1},
7438 {153, 96, 1, 12, 1},
7439 {155, 96, 3, 12, 1},
7440 {157, 96, 5, 12, 1},
7441 {159, 96, 7, 12, 1},
7442 {161, 96, 9, 12, 1},
7443 {165, 97, 1, 12, 1},
7444 {184, 82, 0, 12, 1},
7445 {188, 82, 4, 12, 1},
7446 {192, 82, 8, 12, 1},
7447 {196, 83, 0, 12, 1},
7450 static int rt2800_probe_hw_mode(struct rt2x00_dev
*rt2x00dev
)
7452 struct hw_mode_spec
*spec
= &rt2x00dev
->spec
;
7453 struct channel_info
*info
;
7454 char *default_power1
;
7455 char *default_power2
;
7456 char *default_power3
;
7461 * Disable powersaving as default.
7463 rt2x00dev
->hw
->wiphy
->flags
&= ~WIPHY_FLAG_PS_ON_BY_DEFAULT
;
7466 * Initialize all hw fields.
7468 rt2x00dev
->hw
->flags
=
7469 IEEE80211_HW_SIGNAL_DBM
|
7470 IEEE80211_HW_SUPPORTS_PS
|
7471 IEEE80211_HW_PS_NULLFUNC_STACK
|
7472 IEEE80211_HW_AMPDU_AGGREGATION
|
7473 IEEE80211_HW_REPORTS_TX_ACK_STATUS
|
7474 IEEE80211_HW_SUPPORTS_HT_CCK_RATES
;
7477 * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices
7478 * unless we are capable of sending the buffered frames out after the
7479 * DTIM transmission using rt2x00lib_beacondone. This will send out
7480 * multicast and broadcast traffic immediately instead of buffering it
7481 * infinitly and thus dropping it after some time.
7483 if (!rt2x00_is_usb(rt2x00dev
))
7484 rt2x00dev
->hw
->flags
|=
7485 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING
;
7487 SET_IEEE80211_DEV(rt2x00dev
->hw
, rt2x00dev
->dev
);
7488 SET_IEEE80211_PERM_ADDR(rt2x00dev
->hw
,
7489 rt2800_eeprom_addr(rt2x00dev
,
7490 EEPROM_MAC_ADDR_0
));
7493 * As rt2800 has a global fallback table we cannot specify
7494 * more then one tx rate per frame but since the hw will
7495 * try several rates (based on the fallback table) we should
7496 * initialize max_report_rates to the maximum number of rates
7497 * we are going to try. Otherwise mac80211 will truncate our
7498 * reported tx rates and the rc algortihm will end up with
7501 rt2x00dev
->hw
->max_rates
= 1;
7502 rt2x00dev
->hw
->max_report_rates
= 7;
7503 rt2x00dev
->hw
->max_rate_tries
= 1;
7506 * Initialize hw_mode information.
7508 spec
->supported_rates
= SUPPORT_RATE_CCK
| SUPPORT_RATE_OFDM
;
7510 switch (rt2x00dev
->chip
.rf
) {
7513 spec
->num_channels
= 14;
7514 spec
->channels
= rf_vals
;
7519 spec
->num_channels
= ARRAY_SIZE(rf_vals
);
7520 spec
->channels
= rf_vals
;
7536 spec
->num_channels
= 14;
7537 spec
->channels
= rf_vals_3x
;
7542 spec
->num_channels
= ARRAY_SIZE(rf_vals_3x
);
7543 spec
->channels
= rf_vals_3x
;
7547 rt2800_register_read(rt2x00dev
, MAC_DEBUG_INDEX
, ®
);
7548 if (rt2x00_get_field32(reg
, MAC_DEBUG_INDEX_XTAL
)) {
7549 spec
->num_channels
= ARRAY_SIZE(rf_vals_5592_xtal40
);
7550 spec
->channels
= rf_vals_5592_xtal40
;
7552 spec
->num_channels
= ARRAY_SIZE(rf_vals_5592_xtal20
);
7553 spec
->channels
= rf_vals_5592_xtal20
;
7558 if (WARN_ON_ONCE(!spec
->channels
))
7561 spec
->supported_bands
= SUPPORT_BAND_2GHZ
;
7562 if (spec
->num_channels
> 14)
7563 spec
->supported_bands
|= SUPPORT_BAND_5GHZ
;
7566 * Initialize HT information.
7568 if (!rt2x00_rf(rt2x00dev
, RF2020
))
7569 spec
->ht
.ht_supported
= true;
7571 spec
->ht
.ht_supported
= false;
7574 IEEE80211_HT_CAP_SUP_WIDTH_20_40
|
7575 IEEE80211_HT_CAP_GRN_FLD
|
7576 IEEE80211_HT_CAP_SGI_20
|
7577 IEEE80211_HT_CAP_SGI_40
;
7579 if (rt2x00dev
->default_ant
.tx_chain_num
>= 2)
7580 spec
->ht
.cap
|= IEEE80211_HT_CAP_TX_STBC
;
7582 spec
->ht
.cap
|= rt2x00dev
->default_ant
.rx_chain_num
<<
7583 IEEE80211_HT_CAP_RX_STBC_SHIFT
;
7585 spec
->ht
.ampdu_factor
= 3;
7586 spec
->ht
.ampdu_density
= 4;
7587 spec
->ht
.mcs
.tx_params
=
7588 IEEE80211_HT_MCS_TX_DEFINED
|
7589 IEEE80211_HT_MCS_TX_RX_DIFF
|
7590 ((rt2x00dev
->default_ant
.tx_chain_num
- 1) <<
7591 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT
);
7593 switch (rt2x00dev
->default_ant
.rx_chain_num
) {
7595 spec
->ht
.mcs
.rx_mask
[2] = 0xff;
7597 spec
->ht
.mcs
.rx_mask
[1] = 0xff;
7599 spec
->ht
.mcs
.rx_mask
[0] = 0xff;
7600 spec
->ht
.mcs
.rx_mask
[4] = 0x1; /* MCS32 */
7605 * Create channel information array
7607 info
= kcalloc(spec
->num_channels
, sizeof(*info
), GFP_KERNEL
);
7611 spec
->channels_info
= info
;
7613 default_power1
= rt2800_eeprom_addr(rt2x00dev
, EEPROM_TXPOWER_BG1
);
7614 default_power2
= rt2800_eeprom_addr(rt2x00dev
, EEPROM_TXPOWER_BG2
);
7616 if (rt2x00dev
->default_ant
.tx_chain_num
> 2)
7617 default_power3
= rt2800_eeprom_addr(rt2x00dev
,
7618 EEPROM_EXT_TXPOWER_BG3
);
7620 default_power3
= NULL
;
7622 for (i
= 0; i
< 14; i
++) {
7623 info
[i
].default_power1
= default_power1
[i
];
7624 info
[i
].default_power2
= default_power2
[i
];
7626 info
[i
].default_power3
= default_power3
[i
];
7629 if (spec
->num_channels
> 14) {
7630 default_power1
= rt2800_eeprom_addr(rt2x00dev
,
7632 default_power2
= rt2800_eeprom_addr(rt2x00dev
,
7635 if (rt2x00dev
->default_ant
.tx_chain_num
> 2)
7637 rt2800_eeprom_addr(rt2x00dev
,
7638 EEPROM_EXT_TXPOWER_A3
);
7640 default_power3
= NULL
;
7642 for (i
= 14; i
< spec
->num_channels
; i
++) {
7643 info
[i
].default_power1
= default_power1
[i
- 14];
7644 info
[i
].default_power2
= default_power2
[i
- 14];
7646 info
[i
].default_power3
= default_power3
[i
- 14];
7650 switch (rt2x00dev
->chip
.rf
) {
7665 __set_bit(CAPABILITY_VCO_RECALIBRATION
, &rt2x00dev
->cap_flags
);
7672 static int rt2800_probe_rt(struct rt2x00_dev
*rt2x00dev
)
7678 if (rt2x00_rt(rt2x00dev
, RT3290
))
7679 rt2800_register_read(rt2x00dev
, MAC_CSR0_3290
, ®
);
7681 rt2800_register_read(rt2x00dev
, MAC_CSR0
, ®
);
7683 rt
= rt2x00_get_field32(reg
, MAC_CSR0_CHIPSET
);
7684 rev
= rt2x00_get_field32(reg
, MAC_CSR0_REVISION
);
7703 rt2x00_err(rt2x00dev
, "Invalid RT chipset 0x%04x, rev %04x detected\n",
7708 rt2x00_set_rt(rt2x00dev
, rt
, rev
);
7713 int rt2800_probe_hw(struct rt2x00_dev
*rt2x00dev
)
7718 retval
= rt2800_probe_rt(rt2x00dev
);
7723 * Allocate eeprom data.
7725 retval
= rt2800_validate_eeprom(rt2x00dev
);
7729 retval
= rt2800_init_eeprom(rt2x00dev
);
7734 * Enable rfkill polling by setting GPIO direction of the
7735 * rfkill switch GPIO pin correctly.
7737 rt2800_register_read(rt2x00dev
, GPIO_CTRL
, ®
);
7738 rt2x00_set_field32(®
, GPIO_CTRL_DIR2
, 1);
7739 rt2800_register_write(rt2x00dev
, GPIO_CTRL
, reg
);
7742 * Initialize hw specifications.
7744 retval
= rt2800_probe_hw_mode(rt2x00dev
);
7749 * Set device capabilities.
7751 __set_bit(CAPABILITY_CONTROL_FILTERS
, &rt2x00dev
->cap_flags
);
7752 __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL
, &rt2x00dev
->cap_flags
);
7753 if (!rt2x00_is_usb(rt2x00dev
))
7754 __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT
, &rt2x00dev
->cap_flags
);
7757 * Set device requirements.
7759 if (!rt2x00_is_soc(rt2x00dev
))
7760 __set_bit(REQUIRE_FIRMWARE
, &rt2x00dev
->cap_flags
);
7761 __set_bit(REQUIRE_L2PAD
, &rt2x00dev
->cap_flags
);
7762 __set_bit(REQUIRE_TXSTATUS_FIFO
, &rt2x00dev
->cap_flags
);
7763 if (!rt2800_hwcrypt_disabled(rt2x00dev
))
7764 __set_bit(CAPABILITY_HW_CRYPTO
, &rt2x00dev
->cap_flags
);
7765 __set_bit(CAPABILITY_LINK_TUNING
, &rt2x00dev
->cap_flags
);
7766 __set_bit(REQUIRE_HT_TX_DESC
, &rt2x00dev
->cap_flags
);
7767 if (rt2x00_is_usb(rt2x00dev
))
7768 __set_bit(REQUIRE_PS_AUTOWAKE
, &rt2x00dev
->cap_flags
);
7770 __set_bit(REQUIRE_DMA
, &rt2x00dev
->cap_flags
);
7771 __set_bit(REQUIRE_TASKLET_CONTEXT
, &rt2x00dev
->cap_flags
);
7775 * Set the rssi offset.
7777 rt2x00dev
->rssi_offset
= DEFAULT_RSSI_OFFSET
;
7781 EXPORT_SYMBOL_GPL(rt2800_probe_hw
);
7784 * IEEE80211 stack callback functions.
7786 void rt2800_get_tkip_seq(struct ieee80211_hw
*hw
, u8 hw_key_idx
, u32
*iv32
,
7789 struct rt2x00_dev
*rt2x00dev
= hw
->priv
;
7790 struct mac_iveiv_entry iveiv_entry
;
7793 offset
= MAC_IVEIV_ENTRY(hw_key_idx
);
7794 rt2800_register_multiread(rt2x00dev
, offset
,
7795 &iveiv_entry
, sizeof(iveiv_entry
));
7797 memcpy(iv16
, &iveiv_entry
.iv
[0], sizeof(*iv16
));
7798 memcpy(iv32
, &iveiv_entry
.iv
[4], sizeof(*iv32
));
7800 EXPORT_SYMBOL_GPL(rt2800_get_tkip_seq
);
7802 int rt2800_set_rts_threshold(struct ieee80211_hw
*hw
, u32 value
)
7804 struct rt2x00_dev
*rt2x00dev
= hw
->priv
;
7806 bool enabled
= (value
< IEEE80211_MAX_RTS_THRESHOLD
);
7808 rt2800_register_read(rt2x00dev
, TX_RTS_CFG
, ®
);
7809 rt2x00_set_field32(®
, TX_RTS_CFG_RTS_THRES
, value
);
7810 rt2800_register_write(rt2x00dev
, TX_RTS_CFG
, reg
);
7812 rt2800_register_read(rt2x00dev
, CCK_PROT_CFG
, ®
);
7813 rt2x00_set_field32(®
, CCK_PROT_CFG_RTS_TH_EN
, enabled
);
7814 rt2800_register_write(rt2x00dev
, CCK_PROT_CFG
, reg
);
7816 rt2800_register_read(rt2x00dev
, OFDM_PROT_CFG
, ®
);
7817 rt2x00_set_field32(®
, OFDM_PROT_CFG_RTS_TH_EN
, enabled
);
7818 rt2800_register_write(rt2x00dev
, OFDM_PROT_CFG
, reg
);
7820 rt2800_register_read(rt2x00dev
, MM20_PROT_CFG
, ®
);
7821 rt2x00_set_field32(®
, MM20_PROT_CFG_RTS_TH_EN
, enabled
);
7822 rt2800_register_write(rt2x00dev
, MM20_PROT_CFG
, reg
);
7824 rt2800_register_read(rt2x00dev
, MM40_PROT_CFG
, ®
);
7825 rt2x00_set_field32(®
, MM40_PROT_CFG_RTS_TH_EN
, enabled
);
7826 rt2800_register_write(rt2x00dev
, MM40_PROT_CFG
, reg
);
7828 rt2800_register_read(rt2x00dev
, GF20_PROT_CFG
, ®
);
7829 rt2x00_set_field32(®
, GF20_PROT_CFG_RTS_TH_EN
, enabled
);
7830 rt2800_register_write(rt2x00dev
, GF20_PROT_CFG
, reg
);
7832 rt2800_register_read(rt2x00dev
, GF40_PROT_CFG
, ®
);
7833 rt2x00_set_field32(®
, GF40_PROT_CFG_RTS_TH_EN
, enabled
);
7834 rt2800_register_write(rt2x00dev
, GF40_PROT_CFG
, reg
);
7838 EXPORT_SYMBOL_GPL(rt2800_set_rts_threshold
);
7840 int rt2800_conf_tx(struct ieee80211_hw
*hw
,
7841 struct ieee80211_vif
*vif
, u16 queue_idx
,
7842 const struct ieee80211_tx_queue_params
*params
)
7844 struct rt2x00_dev
*rt2x00dev
= hw
->priv
;
7845 struct data_queue
*queue
;
7846 struct rt2x00_field32 field
;
7852 * First pass the configuration through rt2x00lib, that will
7853 * update the queue settings and validate the input. After that
7854 * we are free to update the registers based on the value
7855 * in the queue parameter.
7857 retval
= rt2x00mac_conf_tx(hw
, vif
, queue_idx
, params
);
7862 * We only need to perform additional register initialization
7868 queue
= rt2x00queue_get_tx_queue(rt2x00dev
, queue_idx
);
7870 /* Update WMM TXOP register */
7871 offset
= WMM_TXOP0_CFG
+ (sizeof(u32
) * (!!(queue_idx
& 2)));
7872 field
.bit_offset
= (queue_idx
& 1) * 16;
7873 field
.bit_mask
= 0xffff << field
.bit_offset
;
7875 rt2800_register_read(rt2x00dev
, offset
, ®
);
7876 rt2x00_set_field32(®
, field
, queue
->txop
);
7877 rt2800_register_write(rt2x00dev
, offset
, reg
);
7879 /* Update WMM registers */
7880 field
.bit_offset
= queue_idx
* 4;
7881 field
.bit_mask
= 0xf << field
.bit_offset
;
7883 rt2800_register_read(rt2x00dev
, WMM_AIFSN_CFG
, ®
);
7884 rt2x00_set_field32(®
, field
, queue
->aifs
);
7885 rt2800_register_write(rt2x00dev
, WMM_AIFSN_CFG
, reg
);
7887 rt2800_register_read(rt2x00dev
, WMM_CWMIN_CFG
, ®
);
7888 rt2x00_set_field32(®
, field
, queue
->cw_min
);
7889 rt2800_register_write(rt2x00dev
, WMM_CWMIN_CFG
, reg
);
7891 rt2800_register_read(rt2x00dev
, WMM_CWMAX_CFG
, ®
);
7892 rt2x00_set_field32(®
, field
, queue
->cw_max
);
7893 rt2800_register_write(rt2x00dev
, WMM_CWMAX_CFG
, reg
);
7895 /* Update EDCA registers */
7896 offset
= EDCA_AC0_CFG
+ (sizeof(u32
) * queue_idx
);
7898 rt2800_register_read(rt2x00dev
, offset
, ®
);
7899 rt2x00_set_field32(®
, EDCA_AC0_CFG_TX_OP
, queue
->txop
);
7900 rt2x00_set_field32(®
, EDCA_AC0_CFG_AIFSN
, queue
->aifs
);
7901 rt2x00_set_field32(®
, EDCA_AC0_CFG_CWMIN
, queue
->cw_min
);
7902 rt2x00_set_field32(®
, EDCA_AC0_CFG_CWMAX
, queue
->cw_max
);
7903 rt2800_register_write(rt2x00dev
, offset
, reg
);
7907 EXPORT_SYMBOL_GPL(rt2800_conf_tx
);
7909 u64
rt2800_get_tsf(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
)
7911 struct rt2x00_dev
*rt2x00dev
= hw
->priv
;
7915 rt2800_register_read(rt2x00dev
, TSF_TIMER_DW1
, ®
);
7916 tsf
= (u64
) rt2x00_get_field32(reg
, TSF_TIMER_DW1_HIGH_WORD
) << 32;
7917 rt2800_register_read(rt2x00dev
, TSF_TIMER_DW0
, ®
);
7918 tsf
|= rt2x00_get_field32(reg
, TSF_TIMER_DW0_LOW_WORD
);
7922 EXPORT_SYMBOL_GPL(rt2800_get_tsf
);
7924 int rt2800_ampdu_action(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
,
7925 enum ieee80211_ampdu_mlme_action action
,
7926 struct ieee80211_sta
*sta
, u16 tid
, u16
*ssn
,
7929 struct rt2x00_sta
*sta_priv
= (struct rt2x00_sta
*)sta
->drv_priv
;
7933 * Don't allow aggregation for stations the hardware isn't aware
7934 * of because tx status reports for frames to an unknown station
7935 * always contain wcid=255 and thus we can't distinguish between
7936 * multiple stations which leads to unwanted situations when the
7937 * hw reorders frames due to aggregation.
7939 if (sta_priv
->wcid
< 0)
7943 case IEEE80211_AMPDU_RX_START
:
7944 case IEEE80211_AMPDU_RX_STOP
:
7946 * The hw itself takes care of setting up BlockAck mechanisms.
7947 * So, we only have to allow mac80211 to nagotiate a BlockAck
7948 * agreement. Once that is done, the hw will BlockAck incoming
7949 * AMPDUs without further setup.
7952 case IEEE80211_AMPDU_TX_START
:
7953 ieee80211_start_tx_ba_cb_irqsafe(vif
, sta
->addr
, tid
);
7955 case IEEE80211_AMPDU_TX_STOP_CONT
:
7956 case IEEE80211_AMPDU_TX_STOP_FLUSH
:
7957 case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT
:
7958 ieee80211_stop_tx_ba_cb_irqsafe(vif
, sta
->addr
, tid
);
7960 case IEEE80211_AMPDU_TX_OPERATIONAL
:
7963 rt2x00_warn((struct rt2x00_dev
*)hw
->priv
,
7964 "Unknown AMPDU action\n");
7969 EXPORT_SYMBOL_GPL(rt2800_ampdu_action
);
7971 int rt2800_get_survey(struct ieee80211_hw
*hw
, int idx
,
7972 struct survey_info
*survey
)
7974 struct rt2x00_dev
*rt2x00dev
= hw
->priv
;
7975 struct ieee80211_conf
*conf
= &hw
->conf
;
7976 u32 idle
, busy
, busy_ext
;
7981 survey
->channel
= conf
->chandef
.chan
;
7983 rt2800_register_read(rt2x00dev
, CH_IDLE_STA
, &idle
);
7984 rt2800_register_read(rt2x00dev
, CH_BUSY_STA
, &busy
);
7985 rt2800_register_read(rt2x00dev
, CH_BUSY_STA_SEC
, &busy_ext
);
7988 survey
->filled
= SURVEY_INFO_CHANNEL_TIME
|
7989 SURVEY_INFO_CHANNEL_TIME_BUSY
|
7990 SURVEY_INFO_CHANNEL_TIME_EXT_BUSY
;
7992 survey
->channel_time
= (idle
+ busy
) / 1000;
7993 survey
->channel_time_busy
= busy
/ 1000;
7994 survey
->channel_time_ext_busy
= busy_ext
/ 1000;
7997 if (!(hw
->conf
.flags
& IEEE80211_CONF_OFFCHANNEL
))
7998 survey
->filled
|= SURVEY_INFO_IN_USE
;
8003 EXPORT_SYMBOL_GPL(rt2800_get_survey
);
8005 MODULE_AUTHOR(DRV_PROJECT
", Bartlomiej Zolnierkiewicz");
8006 MODULE_VERSION(DRV_VERSION
);
8007 MODULE_DESCRIPTION("Ralink RT2800 library");
8008 MODULE_LICENSE("GPL");