net: ptp: do not reimplement PTP/BPF classifier
[linux/fpc-iii.git] / drivers / net / wireless / rt2x00 / rt2800soc.c
blobf6d1bf5be006cd9d8a753d946ebf1f666df1428b
1 /* Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
2 * Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
3 * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
4 * Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
5 * Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
6 * Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
7 * Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
8 * Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
9 * <http://rt2x00.serialmonkey.com>
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, see <http://www.gnu.org/licenses/>.
25 /* Module: rt2800soc
26 * Abstract: rt2800 WiSoC specific routines.
29 #include <linux/etherdevice.h>
30 #include <linux/init.h>
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/platform_device.h>
35 #include "rt2x00.h"
36 #include "rt2x00mmio.h"
37 #include "rt2x00soc.h"
38 #include "rt2800.h"
39 #include "rt2800lib.h"
40 #include "rt2800mmio.h"
42 /* Allow hardware encryption to be disabled. */
43 static bool modparam_nohwcrypt;
44 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
45 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
47 static bool rt2800soc_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
49 return modparam_nohwcrypt;
52 static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
54 rt2800_disable_radio(rt2x00dev);
55 rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0);
56 rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0);
59 static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
60 enum dev_state state)
62 int retval = 0;
64 switch (state) {
65 case STATE_RADIO_ON:
66 retval = rt2800mmio_enable_radio(rt2x00dev);
67 break;
69 case STATE_RADIO_OFF:
70 rt2800soc_disable_radio(rt2x00dev);
71 break;
73 case STATE_RADIO_IRQ_ON:
74 case STATE_RADIO_IRQ_OFF:
75 rt2800mmio_toggle_irq(rt2x00dev, state);
76 break;
78 case STATE_DEEP_SLEEP:
79 case STATE_SLEEP:
80 case STATE_STANDBY:
81 case STATE_AWAKE:
82 /* These states are not supported, but don't report an error */
83 retval = 0;
84 break;
86 default:
87 retval = -ENOTSUPP;
88 break;
91 if (unlikely(retval))
92 rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
93 state, retval);
95 return retval;
98 static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev)
100 void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
102 if (!base_addr)
103 return -ENOMEM;
105 memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
107 iounmap(base_addr);
108 return 0;
111 /* Firmware functions */
112 static char *rt2800soc_get_firmware_name(struct rt2x00_dev *rt2x00dev)
114 WARN_ON_ONCE(1);
115 return NULL;
118 static int rt2800soc_load_firmware(struct rt2x00_dev *rt2x00dev,
119 const u8 *data, const size_t len)
121 WARN_ON_ONCE(1);
122 return 0;
125 static int rt2800soc_check_firmware(struct rt2x00_dev *rt2x00dev,
126 const u8 *data, const size_t len)
128 WARN_ON_ONCE(1);
129 return 0;
132 static int rt2800soc_write_firmware(struct rt2x00_dev *rt2x00dev,
133 const u8 *data, const size_t len)
135 WARN_ON_ONCE(1);
136 return 0;
139 static const struct ieee80211_ops rt2800soc_mac80211_ops = {
140 .tx = rt2x00mac_tx,
141 .start = rt2x00mac_start,
142 .stop = rt2x00mac_stop,
143 .add_interface = rt2x00mac_add_interface,
144 .remove_interface = rt2x00mac_remove_interface,
145 .config = rt2x00mac_config,
146 .configure_filter = rt2x00mac_configure_filter,
147 .set_key = rt2x00mac_set_key,
148 .sw_scan_start = rt2x00mac_sw_scan_start,
149 .sw_scan_complete = rt2x00mac_sw_scan_complete,
150 .get_stats = rt2x00mac_get_stats,
151 .get_tkip_seq = rt2800_get_tkip_seq,
152 .set_rts_threshold = rt2800_set_rts_threshold,
153 .sta_add = rt2x00mac_sta_add,
154 .sta_remove = rt2x00mac_sta_remove,
155 .bss_info_changed = rt2x00mac_bss_info_changed,
156 .conf_tx = rt2800_conf_tx,
157 .get_tsf = rt2800_get_tsf,
158 .rfkill_poll = rt2x00mac_rfkill_poll,
159 .ampdu_action = rt2800_ampdu_action,
160 .flush = rt2x00mac_flush,
161 .get_survey = rt2800_get_survey,
162 .get_ringparam = rt2x00mac_get_ringparam,
163 .tx_frames_pending = rt2x00mac_tx_frames_pending,
166 static const struct rt2800_ops rt2800soc_rt2800_ops = {
167 .register_read = rt2x00mmio_register_read,
168 .register_read_lock = rt2x00mmio_register_read, /* same for SoCs */
169 .register_write = rt2x00mmio_register_write,
170 .register_write_lock = rt2x00mmio_register_write, /* same for SoCs */
171 .register_multiread = rt2x00mmio_register_multiread,
172 .register_multiwrite = rt2x00mmio_register_multiwrite,
173 .regbusy_read = rt2x00mmio_regbusy_read,
174 .read_eeprom = rt2800soc_read_eeprom,
175 .hwcrypt_disabled = rt2800soc_hwcrypt_disabled,
176 .drv_write_firmware = rt2800soc_write_firmware,
177 .drv_init_registers = rt2800mmio_init_registers,
178 .drv_get_txwi = rt2800mmio_get_txwi,
181 static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
182 .irq_handler = rt2800mmio_interrupt,
183 .txstatus_tasklet = rt2800mmio_txstatus_tasklet,
184 .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet,
185 .tbtt_tasklet = rt2800mmio_tbtt_tasklet,
186 .rxdone_tasklet = rt2800mmio_rxdone_tasklet,
187 .autowake_tasklet = rt2800mmio_autowake_tasklet,
188 .probe_hw = rt2800_probe_hw,
189 .get_firmware_name = rt2800soc_get_firmware_name,
190 .check_firmware = rt2800soc_check_firmware,
191 .load_firmware = rt2800soc_load_firmware,
192 .initialize = rt2x00mmio_initialize,
193 .uninitialize = rt2x00mmio_uninitialize,
194 .get_entry_state = rt2800mmio_get_entry_state,
195 .clear_entry = rt2800mmio_clear_entry,
196 .set_device_state = rt2800soc_set_device_state,
197 .rfkill_poll = rt2800_rfkill_poll,
198 .link_stats = rt2800_link_stats,
199 .reset_tuner = rt2800_reset_tuner,
200 .link_tuner = rt2800_link_tuner,
201 .gain_calibration = rt2800_gain_calibration,
202 .vco_calibration = rt2800_vco_calibration,
203 .start_queue = rt2800mmio_start_queue,
204 .kick_queue = rt2800mmio_kick_queue,
205 .stop_queue = rt2800mmio_stop_queue,
206 .flush_queue = rt2x00mmio_flush_queue,
207 .write_tx_desc = rt2800mmio_write_tx_desc,
208 .write_tx_data = rt2800_write_tx_data,
209 .write_beacon = rt2800_write_beacon,
210 .clear_beacon = rt2800_clear_beacon,
211 .fill_rxdone = rt2800mmio_fill_rxdone,
212 .config_shared_key = rt2800_config_shared_key,
213 .config_pairwise_key = rt2800_config_pairwise_key,
214 .config_filter = rt2800_config_filter,
215 .config_intf = rt2800_config_intf,
216 .config_erp = rt2800_config_erp,
217 .config_ant = rt2800_config_ant,
218 .config = rt2800_config,
219 .sta_add = rt2800_sta_add,
220 .sta_remove = rt2800_sta_remove,
223 static const struct rt2x00_ops rt2800soc_ops = {
224 .name = KBUILD_MODNAME,
225 .drv_data_size = sizeof(struct rt2800_drv_data),
226 .max_ap_intf = 8,
227 .eeprom_size = EEPROM_SIZE,
228 .rf_size = RF_SIZE,
229 .tx_queues = NUM_TX_QUEUES,
230 .queue_init = rt2800mmio_queue_init,
231 .lib = &rt2800soc_rt2x00_ops,
232 .drv = &rt2800soc_rt2800_ops,
233 .hw = &rt2800soc_mac80211_ops,
234 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
235 .debugfs = &rt2800_rt2x00debug,
236 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
239 static int rt2800soc_probe(struct platform_device *pdev)
241 return rt2x00soc_probe(pdev, &rt2800soc_ops);
244 static struct platform_driver rt2800soc_driver = {
245 .driver = {
246 .name = "rt2800_wmac",
247 .owner = THIS_MODULE,
248 .mod_name = KBUILD_MODNAME,
250 .probe = rt2800soc_probe,
251 .remove = rt2x00soc_remove,
252 .suspend = rt2x00soc_suspend,
253 .resume = rt2x00soc_resume,
256 module_platform_driver(rt2800soc_driver);
258 MODULE_AUTHOR(DRV_PROJECT);
259 MODULE_VERSION(DRV_VERSION);
260 MODULE_DESCRIPTION("Ralink WiSoC Wireless LAN driver.");
261 MODULE_LICENSE("GPL");