2 * linux/drivers/mmc/sdio_ops.c
4 * Copyright 2006-2007 Pierre Ossman
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
12 #include <linux/scatterlist.h>
14 #include <linux/mmc/host.h>
15 #include <linux/mmc/card.h>
16 #include <linux/mmc/mmc.h>
17 #include <linux/mmc/sdio.h>
22 int mmc_send_io_op_cond(struct mmc_host
*host
, u32 ocr
, u32
*rocr
)
24 struct mmc_command cmd
= {};
27 cmd
.opcode
= SD_IO_SEND_OP_COND
;
29 cmd
.flags
= MMC_RSP_SPI_R4
| MMC_RSP_R4
| MMC_CMD_BCR
;
31 for (i
= 100; i
; i
--) {
32 err
= mmc_wait_for_cmd(host
, &cmd
, MMC_CMD_RETRIES
);
36 /* if we're just probing, do a single pass */
40 /* otherwise wait until reset completes */
41 if (mmc_host_is_spi(host
)) {
43 * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
44 * an initialized card under SPI, but some cards
45 * (Marvell's) only behave when looking at this
48 if (cmd
.resp
[1] & MMC_CARD_BUSY
)
51 if (cmd
.resp
[0] & MMC_CARD_BUSY
)
61 *rocr
= cmd
.resp
[mmc_host_is_spi(host
) ? 1 : 0];
66 static int mmc_io_rw_direct_host(struct mmc_host
*host
, int write
, unsigned fn
,
67 unsigned addr
, u8 in
, u8
*out
)
69 struct mmc_command cmd
= {};
79 cmd
.opcode
= SD_IO_RW_DIRECT
;
80 cmd
.arg
= write
? 0x80000000 : 0x00000000;
82 cmd
.arg
|= (write
&& out
) ? 0x08000000 : 0x00000000;
85 cmd
.flags
= MMC_RSP_SPI_R5
| MMC_RSP_R5
| MMC_CMD_AC
;
87 err
= mmc_wait_for_cmd(host
, &cmd
, 0);
91 if (mmc_host_is_spi(host
)) {
92 /* host driver already reported errors */
94 if (cmd
.resp
[0] & R5_ERROR
)
96 if (cmd
.resp
[0] & R5_FUNCTION_NUMBER
)
98 if (cmd
.resp
[0] & R5_OUT_OF_RANGE
)
103 if (mmc_host_is_spi(host
))
104 *out
= (cmd
.resp
[0] >> 8) & 0xFF;
106 *out
= cmd
.resp
[0] & 0xFF;
112 int mmc_io_rw_direct(struct mmc_card
*card
, int write
, unsigned fn
,
113 unsigned addr
, u8 in
, u8
*out
)
115 return mmc_io_rw_direct_host(card
->host
, write
, fn
, addr
, in
, out
);
118 int mmc_io_rw_extended(struct mmc_card
*card
, int write
, unsigned fn
,
119 unsigned addr
, int incr_addr
, u8
*buf
, unsigned blocks
, unsigned blksz
)
121 struct mmc_request mrq
= {};
122 struct mmc_command cmd
= {};
123 struct mmc_data data
= {};
124 struct scatterlist sg
, *sg_ptr
;
125 struct sg_table sgtable
;
126 unsigned int nents
, left_size
, i
;
127 unsigned int seg_size
= card
->host
->max_seg_size
;
138 cmd
.opcode
= SD_IO_RW_EXTENDED
;
139 cmd
.arg
= write
? 0x80000000 : 0x00000000;
141 cmd
.arg
|= incr_addr
? 0x04000000 : 0x00000000;
142 cmd
.arg
|= addr
<< 9;
144 cmd
.arg
|= (blksz
== 512) ? 0 : blksz
; /* byte mode */
146 cmd
.arg
|= 0x08000000 | blocks
; /* block mode */
147 cmd
.flags
= MMC_RSP_SPI_R5
| MMC_RSP_R5
| MMC_CMD_ADTC
;
150 /* Code in host drivers/fwk assumes that "blocks" always is >=1 */
151 data
.blocks
= blocks
? blocks
: 1;
152 data
.flags
= write
? MMC_DATA_WRITE
: MMC_DATA_READ
;
154 left_size
= data
.blksz
* data
.blocks
;
155 nents
= DIV_ROUND_UP(left_size
, seg_size
);
157 if (sg_alloc_table(&sgtable
, nents
, GFP_KERNEL
))
160 data
.sg
= sgtable
.sgl
;
163 for_each_sg(data
.sg
, sg_ptr
, data
.sg_len
, i
) {
164 sg_set_buf(sg_ptr
, buf
+ i
* seg_size
,
165 min(seg_size
, left_size
));
166 left_size
-= seg_size
;
172 sg_init_one(&sg
, buf
, left_size
);
175 mmc_set_data_timeout(&data
, card
);
177 mmc_wait_for_req(card
->host
, &mrq
);
180 sg_free_table(&sgtable
);
187 if (mmc_host_is_spi(card
->host
)) {
188 /* host driver already reported errors */
190 if (cmd
.resp
[0] & R5_ERROR
)
192 if (cmd
.resp
[0] & R5_FUNCTION_NUMBER
)
194 if (cmd
.resp
[0] & R5_OUT_OF_RANGE
)
201 int sdio_reset(struct mmc_host
*host
)
206 /* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
208 ret
= mmc_io_rw_direct_host(host
, 0, 0, SDIO_CCCR_ABORT
, 0, &abort
);
214 return mmc_io_rw_direct_host(host
, 1, 0, SDIO_CCCR_ABORT
, abort
, NULL
);