i2c: gpio: fault-injector: refactor incomplete transfer
[linux/fpc-iii.git] / drivers / net / wireless / intersil / p54 / p54spi.c
blobe41bf042352edbee19cb08efa0e34d7a8218fb9f
1 /*
2 * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de>
3 * Copyright 2008 Johannes Berg <johannes@sipsolutions.net>
5 * This driver is a port from stlc45xx:
6 * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
23 #include <linux/module.h>
24 #include <linux/platform_device.h>
25 #include <linux/interrupt.h>
26 #include <linux/firmware.h>
27 #include <linux/delay.h>
28 #include <linux/irq.h>
29 #include <linux/spi/spi.h>
30 #include <linux/etherdevice.h>
31 #include <linux/gpio.h>
32 #include <linux/slab.h>
34 #include "p54spi.h"
35 #include "p54.h"
37 #include "lmac.h"
39 #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
40 #include "p54spi_eeprom.h"
41 #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
43 MODULE_FIRMWARE("3826.arm");
45 /* gpios should be handled in board files and provided via platform data,
46 * but because it's currently impossible for p54spi to have a header file
47 * in include/linux, let's use module paramaters for now
50 static int p54spi_gpio_power = 97;
51 module_param(p54spi_gpio_power, int, 0444);
52 MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
54 static int p54spi_gpio_irq = 87;
55 module_param(p54spi_gpio_irq, int, 0444);
56 MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
58 static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
59 void *buf, size_t len)
61 struct spi_transfer t[2];
62 struct spi_message m;
63 __le16 addr;
65 /* We first push the address */
66 addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15);
68 spi_message_init(&m);
69 memset(t, 0, sizeof(t));
71 t[0].tx_buf = &addr;
72 t[0].len = sizeof(addr);
73 spi_message_add_tail(&t[0], &m);
75 t[1].rx_buf = buf;
76 t[1].len = len;
77 spi_message_add_tail(&t[1], &m);
79 spi_sync(priv->spi, &m);
83 static void p54spi_spi_write(struct p54s_priv *priv, u8 address,
84 const void *buf, size_t len)
86 struct spi_transfer t[3];
87 struct spi_message m;
88 __le16 addr;
90 /* We first push the address */
91 addr = cpu_to_le16(address << 8);
93 spi_message_init(&m);
94 memset(t, 0, sizeof(t));
96 t[0].tx_buf = &addr;
97 t[0].len = sizeof(addr);
98 spi_message_add_tail(&t[0], &m);
100 t[1].tx_buf = buf;
101 t[1].len = len & ~1;
102 spi_message_add_tail(&t[1], &m);
104 if (len % 2) {
105 __le16 last_word;
106 last_word = cpu_to_le16(((u8 *)buf)[len - 1]);
108 t[2].tx_buf = &last_word;
109 t[2].len = sizeof(last_word);
110 spi_message_add_tail(&t[2], &m);
113 spi_sync(priv->spi, &m);
116 static u32 p54spi_read32(struct p54s_priv *priv, u8 addr)
118 __le32 val;
120 p54spi_spi_read(priv, addr, &val, sizeof(val));
122 return le32_to_cpu(val);
125 static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val)
127 p54spi_spi_write(priv, addr, &val, sizeof(val));
130 static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val)
132 p54spi_spi_write(priv, addr, &val, sizeof(val));
135 static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits)
137 int i;
139 for (i = 0; i < 2000; i++) {
140 u32 buffer = p54spi_read32(priv, reg);
141 if ((buffer & bits) == bits)
142 return 1;
144 return 0;
147 static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base,
148 const void *buf, size_t len)
150 if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) {
151 dev_err(&priv->spi->dev, "spi_write_dma not allowed "
152 "to DMA write.\n");
153 return -EAGAIN;
156 p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL,
157 cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE));
159 p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len));
160 p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base);
161 p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len);
162 return 0;
165 static int p54spi_request_firmware(struct ieee80211_hw *dev)
167 struct p54s_priv *priv = dev->priv;
168 int ret;
170 /* FIXME: should driver use it's own struct device? */
171 ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev);
173 if (ret < 0) {
174 dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret);
175 return ret;
178 ret = p54_parse_firmware(dev, priv->firmware);
179 if (ret) {
180 release_firmware(priv->firmware);
181 return ret;
184 return 0;
187 static int p54spi_request_eeprom(struct ieee80211_hw *dev)
189 struct p54s_priv *priv = dev->priv;
190 const struct firmware *eeprom;
191 int ret;
193 /* allow users to customize their eeprom.
196 ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev);
197 if (ret < 0) {
198 #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM
199 dev_info(&priv->spi->dev, "loading default eeprom...\n");
200 ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom,
201 sizeof(p54spi_eeprom));
202 #else
203 dev_err(&priv->spi->dev, "Failed to request user eeprom\n");
204 #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */
205 } else {
206 dev_info(&priv->spi->dev, "loading user eeprom...\n");
207 ret = p54_parse_eeprom(dev, (void *) eeprom->data,
208 (int)eeprom->size);
209 release_firmware(eeprom);
211 return ret;
214 static int p54spi_upload_firmware(struct ieee80211_hw *dev)
216 struct p54s_priv *priv = dev->priv;
217 unsigned long fw_len, _fw_len;
218 unsigned int offset = 0;
219 int err = 0;
220 u8 *fw;
222 fw_len = priv->firmware->size;
223 fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL);
224 if (!fw)
225 return -ENOMEM;
227 /* stop the device */
228 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
229 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
230 SPI_CTRL_STAT_START_HALTED));
232 msleep(TARGET_BOOT_SLEEP);
234 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
235 SPI_CTRL_STAT_HOST_OVERRIDE |
236 SPI_CTRL_STAT_START_HALTED));
238 msleep(TARGET_BOOT_SLEEP);
240 while (fw_len > 0) {
241 _fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE);
243 err = p54spi_spi_write_dma(priv, cpu_to_le32(
244 ISL38XX_DEV_FIRMWARE_ADDR + offset),
245 (fw + offset), _fw_len);
246 if (err < 0)
247 goto out;
249 fw_len -= _fw_len;
250 offset += _fw_len;
253 BUG_ON(fw_len != 0);
255 /* enable host interrupts */
256 p54spi_write32(priv, SPI_ADRS_HOST_INT_EN,
257 cpu_to_le32(SPI_HOST_INTS_DEFAULT));
259 /* boot the device */
260 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
261 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET |
262 SPI_CTRL_STAT_RAM_BOOT));
264 msleep(TARGET_BOOT_SLEEP);
266 p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16(
267 SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT));
268 msleep(TARGET_BOOT_SLEEP);
270 out:
271 kfree(fw);
272 return err;
275 static void p54spi_power_off(struct p54s_priv *priv)
277 disable_irq(gpio_to_irq(p54spi_gpio_irq));
278 gpio_set_value(p54spi_gpio_power, 0);
281 static void p54spi_power_on(struct p54s_priv *priv)
283 gpio_set_value(p54spi_gpio_power, 1);
284 enable_irq(gpio_to_irq(p54spi_gpio_irq));
286 /* need to wait a while before device can be accessed, the length
287 * is just a guess
289 msleep(10);
292 static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val)
294 p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val));
297 static int p54spi_wakeup(struct p54s_priv *priv)
299 /* wake the chip */
300 p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
301 cpu_to_le32(SPI_TARGET_INT_WAKEUP));
303 /* And wait for the READY interrupt */
304 if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
305 SPI_HOST_INT_READY)) {
306 dev_err(&priv->spi->dev, "INT_READY timeout\n");
307 return -EBUSY;
310 p54spi_int_ack(priv, SPI_HOST_INT_READY);
311 return 0;
314 static inline void p54spi_sleep(struct p54s_priv *priv)
316 p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS,
317 cpu_to_le32(SPI_TARGET_INT_SLEEP));
320 static void p54spi_int_ready(struct p54s_priv *priv)
322 p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32(
323 SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE));
325 switch (priv->fw_state) {
326 case FW_STATE_BOOTING:
327 priv->fw_state = FW_STATE_READY;
328 complete(&priv->fw_comp);
329 break;
330 case FW_STATE_RESETTING:
331 priv->fw_state = FW_STATE_READY;
332 /* TODO: reinitialize state */
333 break;
334 default:
335 break;
339 static int p54spi_rx(struct p54s_priv *priv)
341 struct sk_buff *skb;
342 u16 len;
343 u16 rx_head[2];
344 #define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16))
346 if (p54spi_wakeup(priv) < 0)
347 return -EBUSY;
349 /* Read data size and first data word in one SPI transaction
350 * This is workaround for firmware/DMA bug,
351 * when first data word gets lost under high load.
353 p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head));
354 len = rx_head[0];
356 if (len == 0) {
357 p54spi_sleep(priv);
358 dev_err(&priv->spi->dev, "rx request of zero bytes\n");
359 return 0;
362 /* Firmware may insert up to 4 padding bytes after the lmac header,
363 * but it does not amend the size of SPI data transfer.
364 * Such packets has correct data size in header, thus referencing
365 * past the end of allocated skb. Reserve extra 4 bytes for this case
367 skb = dev_alloc_skb(len + 4);
368 if (!skb) {
369 p54spi_sleep(priv);
370 dev_err(&priv->spi->dev, "could not alloc skb");
371 return -ENOMEM;
374 if (len <= READAHEAD_SZ) {
375 skb_put_data(skb, rx_head + 1, len);
376 } else {
377 skb_put_data(skb, rx_head + 1, READAHEAD_SZ);
378 p54spi_spi_read(priv, SPI_ADRS_DMA_DATA,
379 skb_put(skb, len - READAHEAD_SZ),
380 len - READAHEAD_SZ);
382 p54spi_sleep(priv);
383 /* Put additional bytes to compensate for the possible
384 * alignment-caused truncation
386 skb_put(skb, 4);
388 if (p54_rx(priv->hw, skb) == 0)
389 dev_kfree_skb(skb);
391 return 0;
395 static irqreturn_t p54spi_interrupt(int irq, void *config)
397 struct spi_device *spi = config;
398 struct p54s_priv *priv = spi_get_drvdata(spi);
400 ieee80211_queue_work(priv->hw, &priv->work);
402 return IRQ_HANDLED;
405 static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb)
407 struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
408 int ret = 0;
410 if (p54spi_wakeup(priv) < 0)
411 return -EBUSY;
413 ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len);
414 if (ret < 0)
415 goto out;
417 if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS,
418 SPI_HOST_INT_WR_READY)) {
419 dev_err(&priv->spi->dev, "WR_READY timeout\n");
420 ret = -EAGAIN;
421 goto out;
424 p54spi_int_ack(priv, SPI_HOST_INT_WR_READY);
426 if (FREE_AFTER_TX(skb))
427 p54_free_skb(priv->hw, skb);
428 out:
429 p54spi_sleep(priv);
430 return ret;
433 static int p54spi_wq_tx(struct p54s_priv *priv)
435 struct p54s_tx_info *entry;
436 struct sk_buff *skb;
437 struct ieee80211_tx_info *info;
438 struct p54_tx_info *minfo;
439 struct p54s_tx_info *dinfo;
440 unsigned long flags;
441 int ret = 0;
443 spin_lock_irqsave(&priv->tx_lock, flags);
445 while (!list_empty(&priv->tx_pending)) {
446 entry = list_entry(priv->tx_pending.next,
447 struct p54s_tx_info, tx_list);
449 list_del_init(&entry->tx_list);
451 spin_unlock_irqrestore(&priv->tx_lock, flags);
453 dinfo = container_of((void *) entry, struct p54s_tx_info,
454 tx_list);
455 minfo = container_of((void *) dinfo, struct p54_tx_info,
456 data);
457 info = container_of((void *) minfo, struct ieee80211_tx_info,
458 rate_driver_data);
459 skb = container_of((void *) info, struct sk_buff, cb);
461 ret = p54spi_tx_frame(priv, skb);
463 if (ret < 0) {
464 p54_free_skb(priv->hw, skb);
465 return ret;
468 spin_lock_irqsave(&priv->tx_lock, flags);
470 spin_unlock_irqrestore(&priv->tx_lock, flags);
471 return ret;
474 static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
476 struct p54s_priv *priv = dev->priv;
477 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
478 struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
479 struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
480 unsigned long flags;
482 BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
484 spin_lock_irqsave(&priv->tx_lock, flags);
485 list_add_tail(&di->tx_list, &priv->tx_pending);
486 spin_unlock_irqrestore(&priv->tx_lock, flags);
488 ieee80211_queue_work(priv->hw, &priv->work);
491 static void p54spi_work(struct work_struct *work)
493 struct p54s_priv *priv = container_of(work, struct p54s_priv, work);
494 u32 ints;
495 int ret;
497 mutex_lock(&priv->mutex);
499 if (priv->fw_state == FW_STATE_OFF)
500 goto out;
502 ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS);
504 if (ints & SPI_HOST_INT_READY) {
505 p54spi_int_ready(priv);
506 p54spi_int_ack(priv, SPI_HOST_INT_READY);
509 if (priv->fw_state != FW_STATE_READY)
510 goto out;
512 if (ints & SPI_HOST_INT_UPDATE) {
513 p54spi_int_ack(priv, SPI_HOST_INT_UPDATE);
514 ret = p54spi_rx(priv);
515 if (ret < 0)
516 goto out;
518 if (ints & SPI_HOST_INT_SW_UPDATE) {
519 p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE);
520 ret = p54spi_rx(priv);
521 if (ret < 0)
522 goto out;
525 ret = p54spi_wq_tx(priv);
526 out:
527 mutex_unlock(&priv->mutex);
530 static int p54spi_op_start(struct ieee80211_hw *dev)
532 struct p54s_priv *priv = dev->priv;
533 unsigned long timeout;
534 int ret = 0;
536 if (mutex_lock_interruptible(&priv->mutex)) {
537 ret = -EINTR;
538 goto out;
541 priv->fw_state = FW_STATE_BOOTING;
543 p54spi_power_on(priv);
545 ret = p54spi_upload_firmware(dev);
546 if (ret < 0) {
547 p54spi_power_off(priv);
548 goto out_unlock;
551 mutex_unlock(&priv->mutex);
553 timeout = msecs_to_jiffies(2000);
554 timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp,
555 timeout);
556 if (!timeout) {
557 dev_err(&priv->spi->dev, "firmware boot failed");
558 p54spi_power_off(priv);
559 ret = -1;
560 goto out;
563 if (mutex_lock_interruptible(&priv->mutex)) {
564 ret = -EINTR;
565 p54spi_power_off(priv);
566 goto out;
569 WARN_ON(priv->fw_state != FW_STATE_READY);
571 out_unlock:
572 mutex_unlock(&priv->mutex);
574 out:
575 return ret;
578 static void p54spi_op_stop(struct ieee80211_hw *dev)
580 struct p54s_priv *priv = dev->priv;
581 unsigned long flags;
583 mutex_lock(&priv->mutex);
584 WARN_ON(priv->fw_state != FW_STATE_READY);
586 p54spi_power_off(priv);
587 spin_lock_irqsave(&priv->tx_lock, flags);
588 INIT_LIST_HEAD(&priv->tx_pending);
589 spin_unlock_irqrestore(&priv->tx_lock, flags);
591 priv->fw_state = FW_STATE_OFF;
592 mutex_unlock(&priv->mutex);
594 cancel_work_sync(&priv->work);
597 static int p54spi_probe(struct spi_device *spi)
599 struct p54s_priv *priv = NULL;
600 struct ieee80211_hw *hw;
601 int ret = -EINVAL;
603 hw = p54_init_common(sizeof(*priv));
604 if (!hw) {
605 dev_err(&spi->dev, "could not alloc ieee80211_hw");
606 return -ENOMEM;
609 priv = hw->priv;
610 priv->hw = hw;
611 spi_set_drvdata(spi, priv);
612 priv->spi = spi;
614 spi->bits_per_word = 16;
615 spi->max_speed_hz = 24000000;
617 ret = spi_setup(spi);
618 if (ret < 0) {
619 dev_err(&priv->spi->dev, "spi_setup failed");
620 goto err_free;
623 ret = gpio_request(p54spi_gpio_power, "p54spi power");
624 if (ret < 0) {
625 dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
626 goto err_free;
629 ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
630 if (ret < 0) {
631 dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
632 goto err_free_gpio_power;
635 gpio_direction_output(p54spi_gpio_power, 0);
636 gpio_direction_input(p54spi_gpio_irq);
638 ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
639 p54spi_interrupt, 0, "p54spi",
640 priv->spi);
641 if (ret < 0) {
642 dev_err(&priv->spi->dev, "request_irq() failed");
643 goto err_free_gpio_irq;
646 irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
648 disable_irq(gpio_to_irq(p54spi_gpio_irq));
650 INIT_WORK(&priv->work, p54spi_work);
651 init_completion(&priv->fw_comp);
652 INIT_LIST_HEAD(&priv->tx_pending);
653 mutex_init(&priv->mutex);
654 spin_lock_init(&priv->tx_lock);
655 SET_IEEE80211_DEV(hw, &spi->dev);
656 priv->common.open = p54spi_op_start;
657 priv->common.stop = p54spi_op_stop;
658 priv->common.tx = p54spi_op_tx;
660 ret = p54spi_request_firmware(hw);
661 if (ret < 0)
662 goto err_free_common;
664 ret = p54spi_request_eeprom(hw);
665 if (ret)
666 goto err_free_common;
668 ret = p54_register_common(hw, &priv->spi->dev);
669 if (ret)
670 goto err_free_common;
672 return 0;
674 err_free_common:
675 free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
676 err_free_gpio_irq:
677 gpio_free(p54spi_gpio_irq);
678 err_free_gpio_power:
679 gpio_free(p54spi_gpio_power);
680 err_free:
681 p54_free_common(priv->hw);
682 return ret;
685 static int p54spi_remove(struct spi_device *spi)
687 struct p54s_priv *priv = spi_get_drvdata(spi);
689 p54_unregister_common(priv->hw);
691 free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
693 gpio_free(p54spi_gpio_power);
694 gpio_free(p54spi_gpio_irq);
695 release_firmware(priv->firmware);
697 mutex_destroy(&priv->mutex);
699 p54_free_common(priv->hw);
701 return 0;
705 static struct spi_driver p54spi_driver = {
706 .driver = {
707 .name = "p54spi",
710 .probe = p54spi_probe,
711 .remove = p54spi_remove,
714 module_spi_driver(p54spi_driver);
716 MODULE_LICENSE("GPL");
717 MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>");
718 MODULE_ALIAS("spi:cx3110x");
719 MODULE_ALIAS("spi:p54spi");
720 MODULE_ALIAS("spi:stlc45xx");