2 * Copyright (C) 2009 Renesas Solutions Corp.
4 * Kuninori Morimoto <morimoto.kuninori@renesas.com>
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file "COPYING" in the main directory of this archive
11 #include <linux/init.h>
12 #include <linux/device.h>
13 #include <linux/platform_device.h>
14 #include <linux/mmc/host.h>
15 #include <linux/mmc/sh_mmcif.h>
16 #include <linux/mmc/sh_mobile_sdhi.h>
17 #include <linux/mtd/physmap.h>
18 #include <linux/mfd/tmio.h>
19 #include <linux/gpio.h>
20 #include <linux/interrupt.h>
22 #include <linux/delay.h>
23 #include <linux/regulator/fixed.h>
24 #include <linux/regulator/machine.h>
25 #include <linux/usb/r8a66597.h>
26 #include <linux/usb/renesas_usbhs.h>
27 #include <linux/i2c.h>
28 #include <linux/i2c/tsc2007.h>
29 #include <linux/spi/spi.h>
30 #include <linux/spi/sh_msiof.h>
31 #include <linux/spi/mmc_spi.h>
32 #include <linux/input.h>
33 #include <linux/input/sh_keysc.h>
34 #include <linux/platform_data/gpio_backlight.h>
35 #include <linux/sh_eth.h>
36 #include <linux/sh_intc.h>
37 #include <linux/videodev2.h>
38 #include <video/sh_mobile_lcdc.h>
39 #include <sound/sh_fsi.h>
40 #include <sound/simple_card.h>
41 #include <media/sh_mobile_ceu.h>
42 #include <media/soc_camera.h>
43 #include <media/tw9910.h>
44 #include <media/mt9t112.h>
45 #include <asm/heartbeat.h>
46 #include <asm/clock.h>
47 #include <asm/suspend.h>
48 #include <cpu/sh7724.h>
51 * Address Interface BusWidth
52 *-----------------------------------------
53 * 0x0000_0000 uboot 16bit
54 * 0x0004_0000 Linux romImage 16bit
55 * 0x0014_0000 MTD for Linux 16bit
56 * 0x0400_0000 Internal I/O 16/32bit
57 * 0x0800_0000 DRAM 32bit
58 * 0x1800_0000 MFI 16bit
62 *------------------------------
63 * DS2[1] = FlashROM write protect ON : write protect
64 * OFF : No write protect
65 * DS2[2] = RMII / TS, SCIF ON : RMII
67 * DS2[3] = Camera / Video ON : Camera
69 * DS2[5] = NTSC_OUT Clock ON : On board OSC
71 * DS2[6-7] = MMC / SD ON-OFF : SD
78 * it needs amixer settings for playing
80 * amixer set 'HeadPhone' 80
81 * amixer set 'Out Mixer Left DAC Left' on
82 * amixer set 'Out Mixer Right DAC Right' on
86 static unsigned char led_pos
[] = { 0, 1, 2, 3 };
88 static struct heartbeat_data heartbeat_data
= {
93 static struct resource heartbeat_resource
= {
94 .start
= 0xA405012C, /* PTG */
95 .end
= 0xA405012E - 1,
96 .flags
= IORESOURCE_MEM
| IORESOURCE_MEM_8BIT
,
99 static struct platform_device heartbeat_device
= {
103 .platform_data
= &heartbeat_data
,
106 .resource
= &heartbeat_resource
,
110 static struct mtd_partition nor_flash_partitions
[] = {
112 .name
= "boot loader",
114 .size
= (5 * 1024 * 1024),
115 .mask_flags
= MTD_WRITEABLE
, /* force read-only */
118 .offset
= MTDPART_OFS_APPEND
,
119 .size
= MTDPART_SIZ_FULL
,
123 static struct physmap_flash_data nor_flash_data
= {
125 .parts
= nor_flash_partitions
,
126 .nr_parts
= ARRAY_SIZE(nor_flash_partitions
),
129 static struct resource nor_flash_resources
[] = {
134 .flags
= IORESOURCE_MEM
,
138 static struct platform_device nor_flash_device
= {
139 .name
= "physmap-flash",
140 .resource
= nor_flash_resources
,
141 .num_resources
= ARRAY_SIZE(nor_flash_resources
),
143 .platform_data
= &nor_flash_data
,
148 #define SH_ETH_ADDR (0xA4600000)
149 static struct resource sh_eth_resources
[] = {
151 .start
= SH_ETH_ADDR
,
152 .end
= SH_ETH_ADDR
+ 0x1FC,
153 .flags
= IORESOURCE_MEM
,
156 .start
= evt2irq(0xd60),
157 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
161 static struct sh_eth_plat_data sh_eth_plat
= {
162 .phy
= 0x1f, /* SMSC LAN8700 */
163 .edmac_endian
= EDMAC_LITTLE_ENDIAN
,
164 .phy_interface
= PHY_INTERFACE_MODE_MII
,
165 .ether_link_active_low
= 1
168 static struct platform_device sh_eth_device
= {
169 .name
= "sh7724-ether",
172 .platform_data
= &sh_eth_plat
,
174 .num_resources
= ARRAY_SIZE(sh_eth_resources
),
175 .resource
= sh_eth_resources
,
179 static void usb0_port_power(int port
, int power
)
181 gpio_set_value(GPIO_PTB4
, power
);
184 static struct r8a66597_platdata usb0_host_data
= {
186 .port_power
= usb0_port_power
,
189 static struct resource usb0_host_resources
[] = {
192 .end
= 0xa4d80124 - 1,
193 .flags
= IORESOURCE_MEM
,
196 .start
= evt2irq(0xa20),
197 .end
= evt2irq(0xa20),
198 .flags
= IORESOURCE_IRQ
| IRQF_TRIGGER_LOW
,
202 static struct platform_device usb0_host_device
= {
203 .name
= "r8a66597_hcd",
206 .dma_mask
= NULL
, /* not use dma */
207 .coherent_dma_mask
= 0xffffffff,
208 .platform_data
= &usb0_host_data
,
210 .num_resources
= ARRAY_SIZE(usb0_host_resources
),
211 .resource
= usb0_host_resources
,
214 /* USB1 host/function */
215 static void usb1_port_power(int port
, int power
)
217 gpio_set_value(GPIO_PTB5
, power
);
220 static struct r8a66597_platdata usb1_common_data
= {
222 .port_power
= usb1_port_power
,
225 static struct resource usb1_common_resources
[] = {
228 .end
= 0xa4d90124 - 1,
229 .flags
= IORESOURCE_MEM
,
232 .start
= evt2irq(0xa40),
233 .end
= evt2irq(0xa40),
234 .flags
= IORESOURCE_IRQ
| IRQF_TRIGGER_LOW
,
238 static struct platform_device usb1_common_device
= {
239 /* .name will be added in arch_setup */
242 .dma_mask
= NULL
, /* not use dma */
243 .coherent_dma_mask
= 0xffffffff,
244 .platform_data
= &usb1_common_data
,
246 .num_resources
= ARRAY_SIZE(usb1_common_resources
),
247 .resource
= usb1_common_resources
,
253 static int usbhs_get_id(struct platform_device
*pdev
)
255 return gpio_get_value(GPIO_PTB3
);
258 static int usbhs_phy_reset(struct platform_device
*pdev
)
260 /* enable vbus if HOST */
261 if (!gpio_get_value(GPIO_PTB3
))
262 gpio_set_value(GPIO_PTB5
, 1);
267 static struct renesas_usbhs_platform_info usbhs_info
= {
268 .platform_callback
= {
269 .get_id
= usbhs_get_id
,
270 .phy_reset
= usbhs_phy_reset
,
274 .detection_delay
= 5,
275 .d0_tx_id
= SHDMA_SLAVE_USB1D0_TX
,
276 .d0_rx_id
= SHDMA_SLAVE_USB1D0_RX
,
277 .d1_tx_id
= SHDMA_SLAVE_USB1D1_TX
,
278 .d1_rx_id
= SHDMA_SLAVE_USB1D1_RX
,
282 static struct resource usbhs_resources
[] = {
285 .end
= 0xa4d90124 - 1,
286 .flags
= IORESOURCE_MEM
,
289 .start
= evt2irq(0xa40),
290 .end
= evt2irq(0xa40),
291 .flags
= IORESOURCE_IRQ
,
295 static struct platform_device usbhs_device
= {
296 .name
= "renesas_usbhs",
299 .dma_mask
= NULL
, /* not use dma */
300 .coherent_dma_mask
= 0xffffffff,
301 .platform_data
= &usbhs_info
,
303 .num_resources
= ARRAY_SIZE(usbhs_resources
),
304 .resource
= usbhs_resources
,
307 /* LCDC and backlight */
308 static const struct fb_videomode ecovec_lcd_modes
[] = {
319 .sync
= 0, /* hsync and vsync are active low */
323 static const struct fb_videomode ecovec_dvi_modes
[] = {
334 .sync
= 0, /* hsync and vsync are active low */
338 static struct sh_mobile_lcdc_info lcdc_info
= {
340 .interface_type
= RGB18
,
341 .chan
= LCDC_CHAN_MAINLCD
,
342 .fourcc
= V4L2_PIX_FMT_RGB565
,
343 .panel_cfg
= { /* 7.0 inch */
350 static struct resource lcdc_resources
[] = {
355 .flags
= IORESOURCE_MEM
,
358 .start
= evt2irq(0xf40),
359 .flags
= IORESOURCE_IRQ
,
363 static struct platform_device lcdc_device
= {
364 .name
= "sh_mobile_lcdc_fb",
365 .num_resources
= ARRAY_SIZE(lcdc_resources
),
366 .resource
= lcdc_resources
,
368 .platform_data
= &lcdc_info
,
372 static struct gpio_backlight_platform_data gpio_backlight_data
= {
373 .fbdev
= &lcdc_device
.dev
,
379 static struct platform_device gpio_backlight_device
= {
380 .name
= "gpio-backlight",
382 .platform_data
= &gpio_backlight_data
,
387 static struct sh_mobile_ceu_info sh_mobile_ceu0_info
= {
388 .flags
= SH_CEU_FLAG_USE_8BIT_BUS
,
391 static struct resource ceu0_resources
[] = {
396 .flags
= IORESOURCE_MEM
,
399 .start
= evt2irq(0x880),
400 .flags
= IORESOURCE_IRQ
,
403 /* place holder for contiguous memory */
407 static struct platform_device ceu0_device
= {
408 .name
= "sh_mobile_ceu",
409 .id
= 0, /* "ceu0" clock */
410 .num_resources
= ARRAY_SIZE(ceu0_resources
),
411 .resource
= ceu0_resources
,
413 .platform_data
= &sh_mobile_ceu0_info
,
418 static struct sh_mobile_ceu_info sh_mobile_ceu1_info
= {
419 .flags
= SH_CEU_FLAG_USE_8BIT_BUS
,
422 static struct resource ceu1_resources
[] = {
427 .flags
= IORESOURCE_MEM
,
430 .start
= evt2irq(0x9e0),
431 .flags
= IORESOURCE_IRQ
,
434 /* place holder for contiguous memory */
438 static struct platform_device ceu1_device
= {
439 .name
= "sh_mobile_ceu",
440 .id
= 1, /* "ceu1" clock */
441 .num_resources
= ARRAY_SIZE(ceu1_resources
),
442 .resource
= ceu1_resources
,
444 .platform_data
= &sh_mobile_ceu1_info
,
449 static struct i2c_board_info i2c0_devices
[] = {
451 I2C_BOARD_INFO("da7210", 0x1a),
455 static struct i2c_board_info i2c1_devices
[] = {
457 I2C_BOARD_INFO("r2025sd", 0x32),
460 I2C_BOARD_INFO("lis3lv02d", 0x1c),
461 .irq
= evt2irq(0x620),
466 static struct sh_keysc_info keysc_info
= {
467 .mode
= SH_KEYSC_MODE_1
,
471 .keycodes
= { KEY_1
, 0, 0, 0, 0,
476 KEY_6
, 0, 0, 0, 0, },
479 static struct resource keysc_resources
[] = {
484 .flags
= IORESOURCE_MEM
,
487 .start
= evt2irq(0xbe0),
488 .flags
= IORESOURCE_IRQ
,
492 static struct platform_device keysc_device
= {
494 .id
= 0, /* keysc0 clock */
495 .num_resources
= ARRAY_SIZE(keysc_resources
),
496 .resource
= keysc_resources
,
498 .platform_data
= &keysc_info
,
503 #define IRQ0 evt2irq(0x600)
505 static int ts_get_pendown_state(struct device
*dev
)
508 gpio_free(GPIO_FN_INTC_IRQ0
);
509 gpio_request(GPIO_PTZ0
, NULL
);
510 gpio_direction_input(GPIO_PTZ0
);
512 val
= gpio_get_value(GPIO_PTZ0
);
514 gpio_free(GPIO_PTZ0
);
515 gpio_request(GPIO_FN_INTC_IRQ0
, NULL
);
520 static int ts_init(void)
522 gpio_request(GPIO_FN_INTC_IRQ0
, NULL
);
526 static struct tsc2007_platform_data tsc2007_info
= {
529 .get_pendown_state
= ts_get_pendown_state
,
530 .init_platform_hw
= ts_init
,
533 static struct i2c_board_info ts_i2c_clients
= {
534 I2C_BOARD_INFO("tsc2007", 0x48),
536 .platform_data
= &tsc2007_info
,
540 static struct regulator_consumer_supply cn12_power_consumers
[] =
542 REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
543 REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
544 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
545 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
548 static struct regulator_init_data cn12_power_init_data
= {
550 .valid_ops_mask
= REGULATOR_CHANGE_STATUS
,
552 .num_consumer_supplies
= ARRAY_SIZE(cn12_power_consumers
),
553 .consumer_supplies
= cn12_power_consumers
,
556 static struct fixed_voltage_config cn12_power_info
= {
557 .supply_name
= "CN12 SD/MMC Vdd",
558 .microvolts
= 3300000,
561 .init_data
= &cn12_power_init_data
,
564 static struct platform_device cn12_power
= {
565 .name
= "reg-fixed-voltage",
568 .platform_data
= &cn12_power_info
,
572 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
574 static struct regulator_consumer_supply sdhi0_power_consumers
[] =
576 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
577 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
580 static struct regulator_init_data sdhi0_power_init_data
= {
582 .valid_ops_mask
= REGULATOR_CHANGE_STATUS
,
584 .num_consumer_supplies
= ARRAY_SIZE(sdhi0_power_consumers
),
585 .consumer_supplies
= sdhi0_power_consumers
,
588 static struct fixed_voltage_config sdhi0_power_info
= {
589 .supply_name
= "CN11 SD/MMC Vdd",
590 .microvolts
= 3300000,
593 .init_data
= &sdhi0_power_init_data
,
596 static struct platform_device sdhi0_power
= {
597 .name
= "reg-fixed-voltage",
600 .platform_data
= &sdhi0_power_info
,
604 static struct sh_mobile_sdhi_info sdhi0_info
= {
605 .dma_slave_tx
= SHDMA_SLAVE_SDHI0_TX
,
606 .dma_slave_rx
= SHDMA_SLAVE_SDHI0_RX
,
607 .tmio_caps
= MMC_CAP_SDIO_IRQ
| MMC_CAP_POWER_OFF_CARD
|
609 .tmio_flags
= TMIO_MMC_USE_GPIO_CD
,
610 .cd_gpio
= GPIO_PTY7
,
613 static struct resource sdhi0_resources
[] = {
618 .flags
= IORESOURCE_MEM
,
621 .start
= evt2irq(0xe80),
622 .flags
= IORESOURCE_IRQ
,
626 static struct platform_device sdhi0_device
= {
627 .name
= "sh_mobile_sdhi",
628 .num_resources
= ARRAY_SIZE(sdhi0_resources
),
629 .resource
= sdhi0_resources
,
632 .platform_data
= &sdhi0_info
,
636 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
638 static struct sh_mobile_sdhi_info sdhi1_info
= {
639 .dma_slave_tx
= SHDMA_SLAVE_SDHI1_TX
,
640 .dma_slave_rx
= SHDMA_SLAVE_SDHI1_RX
,
641 .tmio_caps
= MMC_CAP_SDIO_IRQ
| MMC_CAP_POWER_OFF_CARD
|
643 .tmio_flags
= TMIO_MMC_USE_GPIO_CD
,
644 .cd_gpio
= GPIO_PTW7
,
647 static struct resource sdhi1_resources
[] = {
652 .flags
= IORESOURCE_MEM
,
655 .start
= evt2irq(0x4e0),
656 .flags
= IORESOURCE_IRQ
,
660 static struct platform_device sdhi1_device
= {
661 .name
= "sh_mobile_sdhi",
662 .num_resources
= ARRAY_SIZE(sdhi1_resources
),
663 .resource
= sdhi1_resources
,
666 .platform_data
= &sdhi1_info
,
669 #endif /* CONFIG_MMC_SH_MMCIF */
674 static void mmc_spi_setpower(struct device
*dev
, unsigned int maskval
)
676 gpio_set_value(GPIO_PTB6
, maskval
? 1 : 0);
679 static struct mmc_spi_platform_data mmc_spi_info
= {
680 .caps
= MMC_CAP_NEEDS_POLL
,
681 .caps2
= MMC_CAP2_RO_ACTIVE_HIGH
,
682 .ocr_mask
= MMC_VDD_32_33
| MMC_VDD_33_34
, /* 3.3V only */
683 .setpower
= mmc_spi_setpower
,
684 .flags
= MMC_SPI_USE_CD_GPIO
| MMC_SPI_USE_RO_GPIO
,
685 .cd_gpio
= GPIO_PTY7
,
686 .ro_gpio
= GPIO_PTY6
,
689 static struct spi_board_info spi_bus
[] = {
691 .modalias
= "mmc_spi",
692 .platform_data
= &mmc_spi_info
,
693 .max_speed_hz
= 5000000,
695 .controller_data
= (void *) GPIO_PTM4
,
700 static struct sh_msiof_spi_info msiof0_data
= {
704 static struct resource msiof0_resources
[] = {
709 .flags
= IORESOURCE_MEM
,
712 .start
= evt2irq(0xc80),
713 .flags
= IORESOURCE_IRQ
,
717 static struct platform_device msiof0_device
= {
718 .name
= "spi_sh_msiof",
719 .id
= 0, /* MSIOF0 */
721 .platform_data
= &msiof0_data
,
723 .num_resources
= ARRAY_SIZE(msiof0_resources
),
724 .resource
= msiof0_resources
,
729 /* I2C Video/Camera */
730 static struct i2c_board_info i2c_camera
[] = {
732 I2C_BOARD_INFO("tw9910", 0x45),
736 I2C_BOARD_INFO("mt9t112", 0x3c),
740 I2C_BOARD_INFO("mt9t112", 0x3c),
745 static int tw9910_power(struct device
*dev
, int mode
)
747 int val
= mode
? 0 : 1;
749 gpio_set_value(GPIO_PTU2
, val
);
756 static struct tw9910_video_info tw9910_info
= {
757 .buswidth
= SOCAM_DATAWIDTH_8
,
758 .mpout
= TW9910_MPO_FIELD
,
761 static struct soc_camera_link tw9910_link
= {
764 .power
= tw9910_power
,
765 .board_info
= &i2c_camera
[0],
766 .priv
= &tw9910_info
,
770 static int mt9t112_power1(struct device
*dev
, int mode
)
772 gpio_set_value(GPIO_PTA3
, mode
);
779 static struct mt9t112_camera_info mt9t112_info1
= {
780 .flags
= MT9T112_FLAG_PCLK_RISING_EDGE
| MT9T112_FLAG_DATAWIDTH_8
,
781 .divider
= { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
784 static struct soc_camera_link mt9t112_link1
= {
786 .power
= mt9t112_power1
,
788 .board_info
= &i2c_camera
[1],
789 .priv
= &mt9t112_info1
,
792 static int mt9t112_power2(struct device
*dev
, int mode
)
794 gpio_set_value(GPIO_PTA4
, mode
);
801 static struct mt9t112_camera_info mt9t112_info2
= {
802 .flags
= MT9T112_FLAG_PCLK_RISING_EDGE
| MT9T112_FLAG_DATAWIDTH_8
,
803 .divider
= { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
806 static struct soc_camera_link mt9t112_link2
= {
808 .power
= mt9t112_power2
,
810 .board_info
= &i2c_camera
[2],
811 .priv
= &mt9t112_info2
,
814 static struct platform_device camera_devices
[] = {
816 .name
= "soc-camera-pdrv",
819 .platform_data
= &tw9910_link
,
823 .name
= "soc-camera-pdrv",
826 .platform_data
= &mt9t112_link1
,
830 .name
= "soc-camera-pdrv",
833 .platform_data
= &mt9t112_link2
,
839 static struct resource fsi_resources
[] = {
844 .flags
= IORESOURCE_MEM
,
847 .start
= evt2irq(0xf80),
848 .flags
= IORESOURCE_IRQ
,
852 static struct platform_device fsi_device
= {
855 .num_resources
= ARRAY_SIZE(fsi_resources
),
856 .resource
= fsi_resources
,
859 static struct asoc_simple_card_info fsi_da7210_info
= {
861 .card
= "FSIB-DA7210",
862 .codec
= "da7210.0-001a",
863 .platform
= "sh_fsi.0",
864 .daifmt
= SND_SOC_DAIFMT_I2S
| SND_SOC_DAIFMT_CBM_CFM
,
869 .name
= "da7210-hifi",
873 static struct platform_device fsi_da7210_device
= {
874 .name
= "asoc-simple-card",
876 .platform_data
= &fsi_da7210_info
,
877 .coherent_dma_mask
= DMA_BIT_MASK(32),
878 .dma_mask
= &fsi_da7210_device
.dev
.coherent_dma_mask
,
884 static struct resource irda_resources
[] = {
889 .flags
= IORESOURCE_MEM
,
892 .start
= evt2irq(0x480),
893 .flags
= IORESOURCE_IRQ
,
897 static struct platform_device irda_device
= {
899 .num_resources
= ARRAY_SIZE(irda_resources
),
900 .resource
= irda_resources
,
903 #include <media/ak881x.h>
904 #include <media/sh_vou.h>
906 static struct ak881x_pdata ak881x_pdata
= {
907 .flags
= AK881X_IF_MODE_SLAVE
,
910 static struct i2c_board_info ak8813
= {
911 I2C_BOARD_INFO("ak8813", 0x20),
912 .platform_data
= &ak881x_pdata
,
915 static struct sh_vou_pdata sh_vou_pdata
= {
916 .bus_fmt
= SH_VOU_BUS_8BIT
,
917 .flags
= SH_VOU_HSYNC_LOW
| SH_VOU_VSYNC_LOW
,
918 .board_info
= &ak8813
,
922 static struct resource sh_vou_resources
[] = {
926 .flags
= IORESOURCE_MEM
,
929 .start
= evt2irq(0x8e0),
930 .flags
= IORESOURCE_IRQ
,
934 static struct platform_device vou_device
= {
937 .num_resources
= ARRAY_SIZE(sh_vou_resources
),
938 .resource
= sh_vou_resources
,
940 .platform_data
= &sh_vou_pdata
,
944 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
946 static struct resource sh_mmcif_resources
[] = {
951 .flags
= IORESOURCE_MEM
,
955 .start
= evt2irq(0x5a0),
956 .flags
= IORESOURCE_IRQ
,
960 .start
= evt2irq(0x5c0),
961 .flags
= IORESOURCE_IRQ
,
965 static struct sh_mmcif_plat_data sh_mmcif_plat
= {
966 .sup_pclk
= 0, /* SH7724: Max Pclk/2 */
967 .caps
= MMC_CAP_4_BIT_DATA
|
970 .ocr
= MMC_VDD_32_33
| MMC_VDD_33_34
,
973 static struct platform_device sh_mmcif_device
= {
977 .platform_data
= &sh_mmcif_plat
,
979 .num_resources
= ARRAY_SIZE(sh_mmcif_resources
),
980 .resource
= sh_mmcif_resources
,
984 static struct platform_device
*ecovec_devices
[] __initdata
= {
992 &gpio_backlight_device
,
997 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
1000 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
1013 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
1019 #define EEPROM_ADDR 0x50
1020 static u8
mac_read(struct i2c_adapter
*a
, u8 command
)
1022 struct i2c_msg msg
[2];
1026 msg
[0].addr
= EEPROM_ADDR
;
1029 msg
[0].buf
= &command
;
1031 msg
[1].addr
= EEPROM_ADDR
;
1032 msg
[1].flags
= I2C_M_RD
;
1036 ret
= i2c_transfer(a
, msg
, 2);
1038 printk(KERN_ERR
"error %d\n", ret
);
1045 static void __init
sh_eth_init(struct sh_eth_plat_data
*pd
)
1047 struct i2c_adapter
*a
= i2c_get_adapter(1);
1051 pr_err("can not get I2C 1\n");
1055 /* read MAC address from EEPROM */
1056 for (i
= 0; i
< sizeof(pd
->mac_addr
); i
++) {
1057 pd
->mac_addr
[i
] = mac_read(a
, 0x10 + i
);
1064 static void __init
sh_eth_init(struct sh_eth_plat_data
*pd
)
1066 pr_err("unable to read sh_eth MAC address\n");
1070 #define PORT_HIZA 0xA4050158
1071 #define IODRIVEA 0xA405018A
1073 extern char ecovec24_sdram_enter_start
;
1074 extern char ecovec24_sdram_enter_end
;
1075 extern char ecovec24_sdram_leave_start
;
1076 extern char ecovec24_sdram_leave_end
;
1078 static int __init
arch_setup(void)
1081 bool cn12_enabled
= false;
1083 /* register board specific self-refresh code */
1084 sh_mobile_register_self_refresh(SUSP_SH_STANDBY
| SUSP_SH_SF
|
1086 &ecovec24_sdram_enter_start
,
1087 &ecovec24_sdram_enter_end
,
1088 &ecovec24_sdram_leave_start
,
1089 &ecovec24_sdram_leave_end
);
1091 /* enable STATUS0, STATUS2 and PDSTATUS */
1092 gpio_request(GPIO_FN_STATUS0
, NULL
);
1093 gpio_request(GPIO_FN_STATUS2
, NULL
);
1094 gpio_request(GPIO_FN_PDSTATUS
, NULL
);
1097 gpio_request(GPIO_FN_SCIF0_TXD
, NULL
);
1098 gpio_request(GPIO_FN_SCIF0_RXD
, NULL
);
1100 /* enable debug LED */
1101 gpio_request(GPIO_PTG0
, NULL
);
1102 gpio_request(GPIO_PTG1
, NULL
);
1103 gpio_request(GPIO_PTG2
, NULL
);
1104 gpio_request(GPIO_PTG3
, NULL
);
1105 gpio_direction_output(GPIO_PTG0
, 0);
1106 gpio_direction_output(GPIO_PTG1
, 0);
1107 gpio_direction_output(GPIO_PTG2
, 0);
1108 gpio_direction_output(GPIO_PTG3
, 0);
1109 __raw_writew((__raw_readw(PORT_HIZA
) & ~(0x1 << 1)) , PORT_HIZA
);
1112 gpio_request(GPIO_PTA1
, NULL
);
1113 gpio_direction_output(GPIO_PTA1
, 1);
1116 gpio_request(GPIO_FN_RMII_RXD0
, NULL
);
1117 gpio_request(GPIO_FN_RMII_RXD1
, NULL
);
1118 gpio_request(GPIO_FN_RMII_TXD0
, NULL
);
1119 gpio_request(GPIO_FN_RMII_TXD1
, NULL
);
1120 gpio_request(GPIO_FN_RMII_REF_CLK
, NULL
);
1121 gpio_request(GPIO_FN_RMII_TX_EN
, NULL
);
1122 gpio_request(GPIO_FN_RMII_RX_ER
, NULL
);
1123 gpio_request(GPIO_FN_RMII_CRS_DV
, NULL
);
1124 gpio_request(GPIO_FN_MDIO
, NULL
);
1125 gpio_request(GPIO_FN_MDC
, NULL
);
1126 gpio_request(GPIO_FN_LNKSTA
, NULL
);
1129 __raw_writew(0x0000, 0xA4D80000);
1130 __raw_writew(0x0000, 0xA4D90000);
1131 gpio_request(GPIO_PTB3
, NULL
);
1132 gpio_request(GPIO_PTB4
, NULL
);
1133 gpio_request(GPIO_PTB5
, NULL
);
1134 gpio_direction_input(GPIO_PTB3
);
1135 gpio_direction_output(GPIO_PTB4
, 0);
1136 gpio_direction_output(GPIO_PTB5
, 0);
1137 __raw_writew(0x0600, 0xa40501d4);
1138 __raw_writew(0x0600, 0xa4050192);
1140 if (gpio_get_value(GPIO_PTB3
)) {
1141 printk(KERN_INFO
"USB1 function is selected\n");
1142 usb1_common_device
.name
= "r8a66597_udc";
1144 printk(KERN_INFO
"USB1 host is selected\n");
1145 usb1_common_device
.name
= "r8a66597_hcd";
1149 gpio_request(GPIO_FN_LCDD23
, NULL
);
1150 gpio_request(GPIO_FN_LCDD22
, NULL
);
1151 gpio_request(GPIO_FN_LCDD21
, NULL
);
1152 gpio_request(GPIO_FN_LCDD20
, NULL
);
1153 gpio_request(GPIO_FN_LCDD19
, NULL
);
1154 gpio_request(GPIO_FN_LCDD18
, NULL
);
1155 gpio_request(GPIO_FN_LCDD17
, NULL
);
1156 gpio_request(GPIO_FN_LCDD16
, NULL
);
1157 gpio_request(GPIO_FN_LCDD15
, NULL
);
1158 gpio_request(GPIO_FN_LCDD14
, NULL
);
1159 gpio_request(GPIO_FN_LCDD13
, NULL
);
1160 gpio_request(GPIO_FN_LCDD12
, NULL
);
1161 gpio_request(GPIO_FN_LCDD11
, NULL
);
1162 gpio_request(GPIO_FN_LCDD10
, NULL
);
1163 gpio_request(GPIO_FN_LCDD9
, NULL
);
1164 gpio_request(GPIO_FN_LCDD8
, NULL
);
1165 gpio_request(GPIO_FN_LCDD7
, NULL
);
1166 gpio_request(GPIO_FN_LCDD6
, NULL
);
1167 gpio_request(GPIO_FN_LCDD5
, NULL
);
1168 gpio_request(GPIO_FN_LCDD4
, NULL
);
1169 gpio_request(GPIO_FN_LCDD3
, NULL
);
1170 gpio_request(GPIO_FN_LCDD2
, NULL
);
1171 gpio_request(GPIO_FN_LCDD1
, NULL
);
1172 gpio_request(GPIO_FN_LCDD0
, NULL
);
1173 gpio_request(GPIO_FN_LCDDISP
, NULL
);
1174 gpio_request(GPIO_FN_LCDHSYN
, NULL
);
1175 gpio_request(GPIO_FN_LCDDCK
, NULL
);
1176 gpio_request(GPIO_FN_LCDVSYN
, NULL
);
1177 gpio_request(GPIO_FN_LCDDON
, NULL
);
1178 gpio_request(GPIO_FN_LCDLCLK
, NULL
);
1179 __raw_writew((__raw_readw(PORT_HIZA
) & ~0x0001), PORT_HIZA
);
1181 gpio_request(GPIO_PTE6
, NULL
);
1182 gpio_request(GPIO_PTU1
, NULL
);
1183 gpio_request(GPIO_PTA2
, NULL
);
1184 gpio_direction_input(GPIO_PTE6
);
1185 gpio_direction_output(GPIO_PTU1
, 0);
1186 gpio_direction_output(GPIO_PTA2
, 0);
1188 /* I/O buffer drive ability is high */
1189 __raw_writew((__raw_readw(IODRIVEA
) & ~0x00c0) | 0x0080 , IODRIVEA
);
1191 if (gpio_get_value(GPIO_PTE6
)) {
1193 lcdc_info
.clock_source
= LCDC_CLK_EXTERNAL
;
1194 lcdc_info
.ch
[0].clock_divider
= 1;
1195 lcdc_info
.ch
[0].lcd_modes
= ecovec_dvi_modes
;
1196 lcdc_info
.ch
[0].num_modes
= ARRAY_SIZE(ecovec_dvi_modes
);
1199 gpio_backlight_data
.fbdev
= NULL
;
1201 gpio_set_value(GPIO_PTA2
, 1);
1202 gpio_set_value(GPIO_PTU1
, 1);
1205 lcdc_info
.clock_source
= LCDC_CLK_PERIPHERAL
;
1206 lcdc_info
.ch
[0].clock_divider
= 2;
1207 lcdc_info
.ch
[0].lcd_modes
= ecovec_lcd_modes
;
1208 lcdc_info
.ch
[0].num_modes
= ARRAY_SIZE(ecovec_lcd_modes
);
1212 * LCDDON control is needed for Panel,
1213 * but current sh_mobile_lcdc driver doesn't control it.
1214 * It is temporary correspondence
1216 gpio_request(GPIO_PTF4
, NULL
);
1217 gpio_direction_output(GPIO_PTF4
, 1);
1219 /* enable TouchScreen */
1220 i2c_register_board_info(0, &ts_i2c_clients
, 1);
1221 irq_set_irq_type(IRQ0
, IRQ_TYPE_LEVEL_LOW
);
1225 gpio_request(GPIO_FN_VIO0_D15
, NULL
);
1226 gpio_request(GPIO_FN_VIO0_D14
, NULL
);
1227 gpio_request(GPIO_FN_VIO0_D13
, NULL
);
1228 gpio_request(GPIO_FN_VIO0_D12
, NULL
);
1229 gpio_request(GPIO_FN_VIO0_D11
, NULL
);
1230 gpio_request(GPIO_FN_VIO0_D10
, NULL
);
1231 gpio_request(GPIO_FN_VIO0_D9
, NULL
);
1232 gpio_request(GPIO_FN_VIO0_D8
, NULL
);
1233 gpio_request(GPIO_FN_VIO0_D7
, NULL
);
1234 gpio_request(GPIO_FN_VIO0_D6
, NULL
);
1235 gpio_request(GPIO_FN_VIO0_D5
, NULL
);
1236 gpio_request(GPIO_FN_VIO0_D4
, NULL
);
1237 gpio_request(GPIO_FN_VIO0_D3
, NULL
);
1238 gpio_request(GPIO_FN_VIO0_D2
, NULL
);
1239 gpio_request(GPIO_FN_VIO0_D1
, NULL
);
1240 gpio_request(GPIO_FN_VIO0_D0
, NULL
);
1241 gpio_request(GPIO_FN_VIO0_VD
, NULL
);
1242 gpio_request(GPIO_FN_VIO0_CLK
, NULL
);
1243 gpio_request(GPIO_FN_VIO0_FLD
, NULL
);
1244 gpio_request(GPIO_FN_VIO0_HD
, NULL
);
1245 platform_resource_setup_memory(&ceu0_device
, "ceu0", 4 << 20);
1248 gpio_request(GPIO_FN_VIO1_D7
, NULL
);
1249 gpio_request(GPIO_FN_VIO1_D6
, NULL
);
1250 gpio_request(GPIO_FN_VIO1_D5
, NULL
);
1251 gpio_request(GPIO_FN_VIO1_D4
, NULL
);
1252 gpio_request(GPIO_FN_VIO1_D3
, NULL
);
1253 gpio_request(GPIO_FN_VIO1_D2
, NULL
);
1254 gpio_request(GPIO_FN_VIO1_D1
, NULL
);
1255 gpio_request(GPIO_FN_VIO1_D0
, NULL
);
1256 gpio_request(GPIO_FN_VIO1_FLD
, NULL
);
1257 gpio_request(GPIO_FN_VIO1_HD
, NULL
);
1258 gpio_request(GPIO_FN_VIO1_VD
, NULL
);
1259 gpio_request(GPIO_FN_VIO1_CLK
, NULL
);
1260 platform_resource_setup_memory(&ceu1_device
, "ceu1", 4 << 20);
1263 gpio_request(GPIO_FN_KEYOUT5_IN5
, NULL
);
1264 gpio_request(GPIO_FN_KEYOUT4_IN6
, NULL
);
1265 gpio_request(GPIO_FN_KEYOUT3
, NULL
);
1266 gpio_request(GPIO_FN_KEYOUT2
, NULL
);
1267 gpio_request(GPIO_FN_KEYOUT1
, NULL
);
1268 gpio_request(GPIO_FN_KEYOUT0
, NULL
);
1269 gpio_request(GPIO_FN_KEYIN0
, NULL
);
1271 /* enable user debug switch */
1272 gpio_request(GPIO_PTR0
, NULL
);
1273 gpio_request(GPIO_PTR4
, NULL
);
1274 gpio_request(GPIO_PTR5
, NULL
);
1275 gpio_request(GPIO_PTR6
, NULL
);
1276 gpio_direction_input(GPIO_PTR0
);
1277 gpio_direction_input(GPIO_PTR4
);
1278 gpio_direction_input(GPIO_PTR5
);
1279 gpio_direction_input(GPIO_PTR6
);
1281 /* SD-card slot CN11 */
1282 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
1283 /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
1284 gpio_request(GPIO_FN_SDHI0WP
, NULL
);
1285 gpio_request(GPIO_FN_SDHI0CMD
, NULL
);
1286 gpio_request(GPIO_FN_SDHI0CLK
, NULL
);
1287 gpio_request(GPIO_FN_SDHI0D3
, NULL
);
1288 gpio_request(GPIO_FN_SDHI0D2
, NULL
);
1289 gpio_request(GPIO_FN_SDHI0D1
, NULL
);
1290 gpio_request(GPIO_FN_SDHI0D0
, NULL
);
1292 /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
1293 gpio_request(GPIO_FN_MSIOF0_TXD
, NULL
);
1294 gpio_request(GPIO_FN_MSIOF0_RXD
, NULL
);
1295 gpio_request(GPIO_FN_MSIOF0_TSCK
, NULL
);
1296 gpio_request(GPIO_PTM4
, NULL
); /* software CS control of TSYNC pin */
1297 gpio_direction_output(GPIO_PTM4
, 1); /* active low CS */
1298 gpio_request(GPIO_PTB6
, NULL
); /* 3.3V power control */
1299 gpio_direction_output(GPIO_PTB6
, 0); /* disable power by default */
1301 spi_register_board_info(spi_bus
, ARRAY_SIZE(spi_bus
));
1304 /* MMC/SD-card slot CN12 */
1305 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
1306 /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
1307 gpio_request(GPIO_FN_MMC_D7
, NULL
);
1308 gpio_request(GPIO_FN_MMC_D6
, NULL
);
1309 gpio_request(GPIO_FN_MMC_D5
, NULL
);
1310 gpio_request(GPIO_FN_MMC_D4
, NULL
);
1311 gpio_request(GPIO_FN_MMC_D3
, NULL
);
1312 gpio_request(GPIO_FN_MMC_D2
, NULL
);
1313 gpio_request(GPIO_FN_MMC_D1
, NULL
);
1314 gpio_request(GPIO_FN_MMC_D0
, NULL
);
1315 gpio_request(GPIO_FN_MMC_CLK
, NULL
);
1316 gpio_request(GPIO_FN_MMC_CMD
, NULL
);
1318 cn12_enabled
= true;
1319 #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
1320 /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
1321 gpio_request(GPIO_FN_SDHI1WP
, NULL
);
1322 gpio_request(GPIO_FN_SDHI1CMD
, NULL
);
1323 gpio_request(GPIO_FN_SDHI1CLK
, NULL
);
1324 gpio_request(GPIO_FN_SDHI1D3
, NULL
);
1325 gpio_request(GPIO_FN_SDHI1D2
, NULL
);
1326 gpio_request(GPIO_FN_SDHI1D1
, NULL
);
1327 gpio_request(GPIO_FN_SDHI1D0
, NULL
);
1329 cn12_enabled
= true;
1333 /* I/O buffer drive ability is high for CN12 */
1334 __raw_writew((__raw_readw(IODRIVEA
) & ~0x3000) | 0x2000,
1338 gpio_request(GPIO_PTU2
, NULL
);
1339 gpio_direction_output(GPIO_PTU2
, 1);
1342 gpio_request(GPIO_PTA3
, NULL
);
1343 gpio_request(GPIO_PTA4
, NULL
);
1344 gpio_direction_output(GPIO_PTA3
, 0);
1345 gpio_direction_output(GPIO_PTA4
, 0);
1348 gpio_request(GPIO_FN_FSIMCKB
, NULL
);
1349 gpio_request(GPIO_FN_FSIIBSD
, NULL
);
1350 gpio_request(GPIO_FN_FSIOBSD
, NULL
);
1351 gpio_request(GPIO_FN_FSIIBBCK
, NULL
);
1352 gpio_request(GPIO_FN_FSIIBLRCK
, NULL
);
1353 gpio_request(GPIO_FN_FSIOBBCK
, NULL
);
1354 gpio_request(GPIO_FN_FSIOBLRCK
, NULL
);
1355 gpio_request(GPIO_FN_CLKAUDIOBO
, NULL
);
1357 /* set SPU2 clock to 83.4 MHz */
1358 clk
= clk_get(NULL
, "spu_clk");
1360 clk_set_rate(clk
, clk_round_rate(clk
, 83333333));
1364 /* change parent of FSI B */
1365 clk
= clk_get(NULL
, "fsib_clk");
1367 /* 48kHz dummy clock was used to make sure 1/1 divide */
1368 clk_set_rate(&sh7724_fsimckb_clk
, 48000);
1369 clk_set_parent(clk
, &sh7724_fsimckb_clk
);
1370 clk_set_rate(clk
, 48000);
1374 gpio_request(GPIO_PTU0
, NULL
);
1375 gpio_direction_output(GPIO_PTU0
, 0);
1378 /* enable motion sensor */
1379 gpio_request(GPIO_FN_INTC_IRQ1
, NULL
);
1380 gpio_direction_input(GPIO_FN_INTC_IRQ1
);
1382 /* set VPU clock to 166 MHz */
1383 clk
= clk_get(NULL
, "vpu_clk");
1385 clk_set_rate(clk
, clk_round_rate(clk
, 166000000));
1390 gpio_request(GPIO_FN_IRDA_OUT
, NULL
);
1391 gpio_request(GPIO_FN_IRDA_IN
, NULL
);
1392 gpio_request(GPIO_PTU5
, NULL
);
1393 gpio_direction_output(GPIO_PTU5
, 0);
1395 /* enable I2C device */
1396 i2c_register_board_info(0, i2c0_devices
,
1397 ARRAY_SIZE(i2c0_devices
));
1399 i2c_register_board_info(1, i2c1_devices
,
1400 ARRAY_SIZE(i2c1_devices
));
1402 #if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
1404 gpio_request(GPIO_FN_DV_D15
, NULL
);
1405 gpio_request(GPIO_FN_DV_D14
, NULL
);
1406 gpio_request(GPIO_FN_DV_D13
, NULL
);
1407 gpio_request(GPIO_FN_DV_D12
, NULL
);
1408 gpio_request(GPIO_FN_DV_D11
, NULL
);
1409 gpio_request(GPIO_FN_DV_D10
, NULL
);
1410 gpio_request(GPIO_FN_DV_D9
, NULL
);
1411 gpio_request(GPIO_FN_DV_D8
, NULL
);
1412 gpio_request(GPIO_FN_DV_CLKI
, NULL
);
1413 gpio_request(GPIO_FN_DV_CLK
, NULL
);
1414 gpio_request(GPIO_FN_DV_VSYNC
, NULL
);
1415 gpio_request(GPIO_FN_DV_HSYNC
, NULL
);
1417 /* AK8813 power / reset sequence */
1418 gpio_request(GPIO_PTG4
, NULL
);
1419 gpio_request(GPIO_PTU3
, NULL
);
1421 gpio_direction_output(GPIO_PTG4
, 0);
1423 gpio_direction_output(GPIO_PTU3
, 1);
1427 /* Power up, reset */
1428 gpio_set_value(GPIO_PTU3
, 0);
1433 gpio_set_value(GPIO_PTG4
, 1);
1436 return platform_add_devices(ecovec_devices
,
1437 ARRAY_SIZE(ecovec_devices
));
1439 arch_initcall(arch_setup
);
1441 static int __init
devices_setup(void)
1443 sh_eth_init(&sh_eth_plat
);
1446 device_initcall(devices_setup
);
1448 static struct sh_machine_vector mv_ecovec __initmv
= {
1449 .mv_name
= "R0P7724 (EcoVec)",