1 // SPDX-License-Identifier: GPL-2.0
3 * tape device discipline for 3590 tapes.
5 * Copyright IBM Corp. 2001, 2009
6 * Author(s): Stefan Bader <shbader@de.ibm.com>
7 * Michael Holzheu <holzheu@de.ibm.com>
8 * Martin Schwidefsky <schwidefsky@de.ibm.com>
11 #define KMSG_COMPONENT "tape_3590"
12 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
14 #include <linux/module.h>
15 #include <linux/slab.h>
16 #include <linux/init.h>
17 #include <linux/bio.h>
18 #include <asm/ebcdic.h>
20 #define TAPE_DBF_AREA tape_3590_dbf
21 #define BUFSIZE 512 /* size of buffers for dynamic generated messages */
25 #include "tape_3590.h"
27 static struct workqueue_struct
*tape_3590_wq
;
30 * Pointer to debug area.
32 debug_info_t
*TAPE_DBF_AREA
= NULL
;
33 EXPORT_SYMBOL(TAPE_DBF_AREA
);
35 /*******************************************************************
36 * Error Recovery functions:
37 * - Read Opposite: implemented
38 * - Read Device (buffered) log: BRA
39 * - Read Library log: BRA
41 * - Long Busy: implemented
42 * - Special Intercept: BRA
43 * - Read Alternate: implemented
44 *******************************************************************/
46 static const char *tape_3590_msg
[TAPE_3590_MAX_MSG
] = {
48 [0x10] = "Lost Sense",
49 [0x11] = "Assigned Elsewhere",
50 [0x12] = "Allegiance Reset",
51 [0x13] = "Shared Access Violation",
52 [0x20] = "Command Reject",
53 [0x21] = "Configuration Error",
54 [0x22] = "Protection Exception",
55 [0x23] = "Write Protect",
56 [0x24] = "Write Length",
57 [0x25] = "Read-Only Format",
58 [0x31] = "Beginning of Partition",
59 [0x33] = "End of Partition",
60 [0x34] = "End of Data",
61 [0x35] = "Block not found",
62 [0x40] = "Device Intervention",
63 [0x41] = "Loader Intervention",
64 [0x42] = "Library Intervention",
65 [0x50] = "Write Error",
66 [0x51] = "Erase Error",
67 [0x52] = "Formatting Error",
68 [0x53] = "Read Error",
69 [0x54] = "Unsupported Format",
70 [0x55] = "No Formatting",
71 [0x56] = "Positioning lost",
72 [0x57] = "Read Length",
73 [0x60] = "Unsupported Medium",
74 [0x61] = "Medium Length Error",
75 [0x62] = "Medium removed",
76 [0x64] = "Load Check",
77 [0x65] = "Unload Check",
78 [0x70] = "Equipment Check",
79 [0x71] = "Bus out Check",
80 [0x72] = "Protocol Error",
81 [0x73] = "Interface Error",
83 [0x75] = "Halt Signal",
84 [0x90] = "Device fenced",
85 [0x91] = "Device Path fenced",
86 [0xa0] = "Volume misplaced",
87 [0xa1] = "Volume inaccessible",
88 [0xa2] = "Volume in input",
89 [0xa3] = "Volume ejected",
90 [0xa4] = "All categories reserved",
91 [0xa5] = "Duplicate Volume",
92 [0xa6] = "Library Manager Offline",
93 [0xa7] = "Library Output Station full",
94 [0xa8] = "Vision System non-operational",
95 [0xa9] = "Library Manager Equipment Check",
96 [0xaa] = "Library Equipment Check",
97 [0xab] = "All Library Cells full",
98 [0xac] = "No Cleaner Volumes in Library",
99 [0xad] = "I/O Station door open",
100 [0xae] = "Subsystem environmental alert",
103 static int crypt_supported(struct tape_device
*device
)
105 return TAPE390_CRYPT_SUPPORTED(TAPE_3590_CRYPT_INFO(device
));
108 static int crypt_enabled(struct tape_device
*device
)
110 return TAPE390_CRYPT_ON(TAPE_3590_CRYPT_INFO(device
));
113 static void ext_to_int_kekl(struct tape390_kekl
*in
,
114 struct tape3592_kekl
*out
)
118 memset(out
, 0, sizeof(*out
));
119 if (in
->type
== TAPE390_KEKL_TYPE_HASH
)
121 if (in
->type_on_tape
== TAPE390_KEKL_TYPE_HASH
)
123 strncpy(out
->label
, in
->label
, 64);
124 for (i
= strlen(in
->label
); i
< sizeof(out
->label
); i
++)
126 ASCEBC(out
->label
, sizeof(out
->label
));
129 static void int_to_ext_kekl(struct tape3592_kekl
*in
,
130 struct tape390_kekl
*out
)
132 memset(out
, 0, sizeof(*out
));
134 out
->type
= TAPE390_KEKL_TYPE_HASH
;
136 out
->type
= TAPE390_KEKL_TYPE_LABEL
;
138 out
->type_on_tape
= TAPE390_KEKL_TYPE_HASH
;
140 out
->type_on_tape
= TAPE390_KEKL_TYPE_LABEL
;
141 memcpy(out
->label
, in
->label
, sizeof(in
->label
));
142 EBCASC(out
->label
, sizeof(in
->label
));
146 static void int_to_ext_kekl_pair(struct tape3592_kekl_pair
*in
,
147 struct tape390_kekl_pair
*out
)
149 if (in
->count
== 0) {
150 out
->kekl
[0].type
= TAPE390_KEKL_TYPE_NONE
;
151 out
->kekl
[0].type_on_tape
= TAPE390_KEKL_TYPE_NONE
;
152 out
->kekl
[1].type
= TAPE390_KEKL_TYPE_NONE
;
153 out
->kekl
[1].type_on_tape
= TAPE390_KEKL_TYPE_NONE
;
154 } else if (in
->count
== 1) {
155 int_to_ext_kekl(&in
->kekl
[0], &out
->kekl
[0]);
156 out
->kekl
[1].type
= TAPE390_KEKL_TYPE_NONE
;
157 out
->kekl
[1].type_on_tape
= TAPE390_KEKL_TYPE_NONE
;
158 } else if (in
->count
== 2) {
159 int_to_ext_kekl(&in
->kekl
[0], &out
->kekl
[0]);
160 int_to_ext_kekl(&in
->kekl
[1], &out
->kekl
[1]);
162 printk("Invalid KEKL number: %d\n", in
->count
);
167 static int check_ext_kekl(struct tape390_kekl
*kekl
)
169 if (kekl
->type
== TAPE390_KEKL_TYPE_NONE
)
171 if (kekl
->type
> TAPE390_KEKL_TYPE_HASH
)
173 if (kekl
->type_on_tape
== TAPE390_KEKL_TYPE_NONE
)
175 if (kekl
->type_on_tape
> TAPE390_KEKL_TYPE_HASH
)
177 if ((kekl
->type
== TAPE390_KEKL_TYPE_HASH
) &&
178 (kekl
->type_on_tape
== TAPE390_KEKL_TYPE_LABEL
))
186 static int check_ext_kekl_pair(struct tape390_kekl_pair
*kekls
)
188 if (check_ext_kekl(&kekls
->kekl
[0]))
190 if (check_ext_kekl(&kekls
->kekl
[1]))
201 static int tape_3592_kekl_query(struct tape_device
*device
,
202 struct tape390_kekl_pair
*ext_kekls
)
204 struct tape_request
*request
;
205 struct tape3592_kekl_query_order
*order
;
206 struct tape3592_kekl_query_data
*int_kekls
;
209 DBF_EVENT(6, "tape3592_kekl_query\n");
210 int_kekls
= kmalloc(sizeof(*int_kekls
), GFP_KERNEL
|GFP_DMA
);
213 request
= tape_alloc_request(2, sizeof(*order
));
214 if (IS_ERR(request
)) {
215 rc
= PTR_ERR(request
);
218 order
= request
->cpdata
;
219 memset(order
,0,sizeof(*order
));
221 order
->max_count
= 2;
222 request
->op
= TO_KEKL_QUERY
;
223 tape_ccw_cc(request
->cpaddr
, PERF_SUBSYS_FUNC
, sizeof(*order
), order
);
224 tape_ccw_end(request
->cpaddr
+ 1, READ_SS_DATA
, sizeof(*int_kekls
),
226 rc
= tape_do_io(device
, request
);
229 int_to_ext_kekl_pair(&int_kekls
->kekls
, ext_kekls
);
233 tape_free_request(request
);
242 static int tape_3592_ioctl_kekl_query(struct tape_device
*device
,
246 struct tape390_kekl_pair
*ext_kekls
;
248 DBF_EVENT(6, "tape_3592_ioctl_kekl_query\n");
249 if (!crypt_supported(device
))
251 if (!crypt_enabled(device
))
253 ext_kekls
= kmalloc(sizeof(*ext_kekls
), GFP_KERNEL
);
256 rc
= tape_3592_kekl_query(device
, ext_kekls
);
259 if (copy_to_user((char __user
*) arg
, ext_kekls
, sizeof(*ext_kekls
))) {
269 static int tape_3590_mttell(struct tape_device
*device
, int mt_count
);
274 static int tape_3592_kekl_set(struct tape_device
*device
,
275 struct tape390_kekl_pair
*ext_kekls
)
277 struct tape_request
*request
;
278 struct tape3592_kekl_set_order
*order
;
280 DBF_EVENT(6, "tape3592_kekl_set\n");
281 if (check_ext_kekl_pair(ext_kekls
)) {
282 DBF_EVENT(6, "invalid kekls\n");
285 if (tape_3590_mttell(device
, 0) != 0)
287 request
= tape_alloc_request(1, sizeof(*order
));
289 return PTR_ERR(request
);
290 order
= request
->cpdata
;
291 memset(order
, 0, sizeof(*order
));
293 order
->kekls
.count
= 2;
294 ext_to_int_kekl(&ext_kekls
->kekl
[0], &order
->kekls
.kekl
[0]);
295 ext_to_int_kekl(&ext_kekls
->kekl
[1], &order
->kekls
.kekl
[1]);
296 request
->op
= TO_KEKL_SET
;
297 tape_ccw_end(request
->cpaddr
, PERF_SUBSYS_FUNC
, sizeof(*order
), order
);
299 return tape_do_io_free(device
, request
);
305 static int tape_3592_ioctl_kekl_set(struct tape_device
*device
,
309 struct tape390_kekl_pair
*ext_kekls
;
311 DBF_EVENT(6, "tape_3592_ioctl_kekl_set\n");
312 if (!crypt_supported(device
))
314 if (!crypt_enabled(device
))
316 ext_kekls
= memdup_user((char __user
*)arg
, sizeof(*ext_kekls
));
317 if (IS_ERR(ext_kekls
))
318 return PTR_ERR(ext_kekls
);
319 rc
= tape_3592_kekl_set(device
, ext_kekls
);
327 static struct tape_request
*__tape_3592_enable_crypt(struct tape_device
*device
)
329 struct tape_request
*request
;
332 DBF_EVENT(6, "tape_3592_enable_crypt\n");
333 if (!crypt_supported(device
))
334 return ERR_PTR(-ENOSYS
);
335 request
= tape_alloc_request(2, 72);
338 data
= request
->cpdata
;
346 data
[36 + 14] = 0x2f;
347 data
[36 + 18] = 0xc3;
348 data
[36 + 35] = 0x72;
349 request
->op
= TO_CRYPT_ON
;
350 tape_ccw_cc(request
->cpaddr
, MODE_SET_CB
, 36, data
);
351 tape_ccw_end(request
->cpaddr
+ 1, MODE_SET_CB
, 36, data
+ 36);
355 static int tape_3592_enable_crypt(struct tape_device
*device
)
357 struct tape_request
*request
;
359 request
= __tape_3592_enable_crypt(device
);
361 return PTR_ERR(request
);
362 return tape_do_io_free(device
, request
);
365 static void tape_3592_enable_crypt_async(struct tape_device
*device
)
367 struct tape_request
*request
;
369 request
= __tape_3592_enable_crypt(device
);
370 if (!IS_ERR(request
))
371 tape_do_io_async_free(device
, request
);
377 static struct tape_request
*__tape_3592_disable_crypt(struct tape_device
*device
)
379 struct tape_request
*request
;
382 DBF_EVENT(6, "tape_3592_disable_crypt\n");
383 if (!crypt_supported(device
))
384 return ERR_PTR(-ENOSYS
);
385 request
= tape_alloc_request(2, 72);
388 data
= request
->cpdata
;
394 data
[36 + 35] = 0x32;
396 request
->op
= TO_CRYPT_OFF
;
397 tape_ccw_cc(request
->cpaddr
, MODE_SET_CB
, 36, data
);
398 tape_ccw_end(request
->cpaddr
+ 1, MODE_SET_CB
, 36, data
+ 36);
403 static int tape_3592_disable_crypt(struct tape_device
*device
)
405 struct tape_request
*request
;
407 request
= __tape_3592_disable_crypt(device
);
409 return PTR_ERR(request
);
410 return tape_do_io_free(device
, request
);
413 static void tape_3592_disable_crypt_async(struct tape_device
*device
)
415 struct tape_request
*request
;
417 request
= __tape_3592_disable_crypt(device
);
418 if (!IS_ERR(request
))
419 tape_do_io_async_free(device
, request
);
423 * IOCTL: Set encryption status
425 static int tape_3592_ioctl_crypt_set(struct tape_device
*device
,
428 struct tape390_crypt_info info
;
430 DBF_EVENT(6, "tape_3592_ioctl_crypt_set\n");
431 if (!crypt_supported(device
))
433 if (copy_from_user(&info
, (char __user
*)arg
, sizeof(info
)))
435 if (info
.status
& ~TAPE390_CRYPT_ON_MASK
)
437 if (info
.status
& TAPE390_CRYPT_ON_MASK
)
438 return tape_3592_enable_crypt(device
);
440 return tape_3592_disable_crypt(device
);
443 static int tape_3590_sense_medium(struct tape_device
*device
);
446 * IOCTL: Query enryption status
448 static int tape_3592_ioctl_crypt_query(struct tape_device
*device
,
451 DBF_EVENT(6, "tape_3592_ioctl_crypt_query\n");
452 if (!crypt_supported(device
))
454 tape_3590_sense_medium(device
);
455 if (copy_to_user((char __user
*) arg
, &TAPE_3590_CRYPT_INFO(device
),
456 sizeof(TAPE_3590_CRYPT_INFO(device
))))
463 * 3590 IOCTL Overload
466 tape_3590_ioctl(struct tape_device
*device
, unsigned int cmd
, unsigned long arg
)
469 case TAPE390_DISPLAY
: {
470 struct display_struct disp
;
472 if (copy_from_user(&disp
, (char __user
*) arg
, sizeof(disp
)))
475 return tape_std_display(device
, &disp
);
477 case TAPE390_KEKL_SET
:
478 return tape_3592_ioctl_kekl_set(device
, arg
);
479 case TAPE390_KEKL_QUERY
:
480 return tape_3592_ioctl_kekl_query(device
, arg
);
481 case TAPE390_CRYPT_SET
:
482 return tape_3592_ioctl_crypt_set(device
, arg
);
483 case TAPE390_CRYPT_QUERY
:
484 return tape_3592_ioctl_crypt_query(device
, arg
);
486 return -EINVAL
; /* no additional ioctls */
491 * SENSE Medium: Get Sense data about medium state
493 static int tape_3590_sense_medium(struct tape_device
*device
)
495 struct tape_request
*request
;
497 request
= tape_alloc_request(1, 128);
499 return PTR_ERR(request
);
500 request
->op
= TO_MSEN
;
501 tape_ccw_end(request
->cpaddr
, MEDIUM_SENSE
, 128, request
->cpdata
);
502 return tape_do_io_free(device
, request
);
505 static void tape_3590_sense_medium_async(struct tape_device
*device
)
507 struct tape_request
*request
;
509 request
= tape_alloc_request(1, 128);
512 request
->op
= TO_MSEN
;
513 tape_ccw_end(request
->cpaddr
, MEDIUM_SENSE
, 128, request
->cpdata
);
514 tape_do_io_async_free(device
, request
);
518 * MTTELL: Tell block. Return the number of block relative to current file.
521 tape_3590_mttell(struct tape_device
*device
, int mt_count
)
526 rc
= tape_std_read_block_id(device
, &block_id
);
529 return block_id
>> 32;
533 * MTSEEK: seek to the specified block.
536 tape_3590_mtseek(struct tape_device
*device
, int count
)
538 struct tape_request
*request
;
540 DBF_EVENT(6, "xsee id: %x\n", count
);
541 request
= tape_alloc_request(3, 4);
543 return PTR_ERR(request
);
544 request
->op
= TO_LBL
;
545 tape_ccw_cc(request
->cpaddr
, MODE_SET_DB
, 1, device
->modeset_byte
);
546 *(__u32
*) request
->cpdata
= count
;
547 tape_ccw_cc(request
->cpaddr
+ 1, LOCATE
, 4, request
->cpdata
);
548 tape_ccw_end(request
->cpaddr
+ 2, NOP
, 0, NULL
);
549 return tape_do_io_free(device
, request
);
553 * Read Opposite Error Recovery Function:
554 * Used, when Read Forward does not work
557 tape_3590_read_opposite(struct tape_device
*device
,
558 struct tape_request
*request
)
560 struct tape_3590_disc_data
*data
;
563 * We have allocated 4 ccws in tape_std_read, so we can now
564 * transform the request to a read backward, followed by a
565 * forward space block.
567 request
->op
= TO_RBA
;
568 tape_ccw_cc(request
->cpaddr
, MODE_SET_DB
, 1, device
->modeset_byte
);
569 data
= device
->discdata
;
570 tape_ccw_cc_idal(request
->cpaddr
+ 1, data
->read_back_op
,
571 device
->char_data
.idal_buf
);
572 tape_ccw_cc(request
->cpaddr
+ 2, FORSPACEBLOCK
, 0, NULL
);
573 tape_ccw_end(request
->cpaddr
+ 3, NOP
, 0, NULL
);
574 DBF_EVENT(6, "xrop ccwg\n");
579 * This should be done after an interrupt with attention bit (0x80)
582 * After a "read attention message" request there are two possible
585 * 1. A unit check is presented, when attention sense is present (e.g. when
586 * a medium has been unloaded). The attention sense comes then
587 * together with the unit check. The recovery action is either "retry"
588 * (in case there is an attention message pending) or "permanent error".
590 * 2. The attention msg is written to the "read subsystem data" buffer.
591 * In this case we probably should print it to the console.
593 static void tape_3590_read_attmsg_async(struct tape_device
*device
)
595 struct tape_request
*request
;
598 request
= tape_alloc_request(3, 4096);
601 request
->op
= TO_READ_ATTMSG
;
602 buf
= request
->cpdata
;
603 buf
[0] = PREP_RD_SS_DATA
;
604 buf
[6] = RD_ATTMSG
; /* read att msg */
605 tape_ccw_cc(request
->cpaddr
, PERFORM_SS_FUNC
, 12, buf
);
606 tape_ccw_cc(request
->cpaddr
+ 1, READ_SS_DATA
, 4096 - 12, buf
+ 12);
607 tape_ccw_end(request
->cpaddr
+ 2, NOP
, 0, NULL
);
608 tape_do_io_async_free(device
, request
);
612 * These functions are used to schedule follow-up actions from within an
613 * interrupt context (like unsolicited interrupts).
614 * Note: the work handler is called by the system work queue. The tape
615 * commands started by the handler need to be asynchrounous, otherwise
616 * a deadlock can occur e.g. in case of a deferred cc=1 (see __tape_do_irq).
618 struct work_handler_data
{
619 struct tape_device
*device
;
621 struct work_struct work
;
625 tape_3590_work_handler(struct work_struct
*work
)
627 struct work_handler_data
*p
=
628 container_of(work
, struct work_handler_data
, work
);
632 tape_3590_sense_medium_async(p
->device
);
635 tape_3590_read_attmsg_async(p
->device
);
638 tape_3592_enable_crypt_async(p
->device
);
641 tape_3592_disable_crypt_async(p
->device
);
644 DBF_EVENT(3, "T3590: work handler undefined for "
645 "operation 0x%02x\n", p
->op
);
647 tape_put_device(p
->device
);
652 tape_3590_schedule_work(struct tape_device
*device
, enum tape_op op
)
654 struct work_handler_data
*p
;
656 if ((p
= kzalloc(sizeof(*p
), GFP_ATOMIC
)) == NULL
)
659 INIT_WORK(&p
->work
, tape_3590_work_handler
);
661 p
->device
= tape_get_device(device
);
664 queue_work(tape_3590_wq
, &p
->work
);
668 static void tape_3590_med_state_set(struct tape_device
*device
,
669 struct tape_3590_med_sense
*sense
)
671 struct tape390_crypt_info
*c_info
;
673 c_info
= &TAPE_3590_CRYPT_INFO(device
);
675 DBF_EVENT(6, "medium state: %x:%x\n", sense
->macst
, sense
->masst
);
676 switch (sense
->macst
) {
680 tape_med_state_set(device
, MS_UNLOADED
);
681 TAPE_3590_CRYPT_INFO(device
).medium_status
= 0;
685 tape_med_state_set(device
, MS_LOADED
);
688 tape_med_state_set(device
, MS_UNKNOWN
);
691 c_info
->medium_status
|= TAPE390_MEDIUM_LOADED_MASK
;
692 if (sense
->flags
& MSENSE_CRYPT_MASK
) {
693 DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense
->flags
);
694 c_info
->medium_status
|= TAPE390_MEDIUM_ENCRYPTED_MASK
;
696 DBF_EVENT(6, "Medium is not encrypted %04x\n", sense
->flags
);
697 c_info
->medium_status
&= ~TAPE390_MEDIUM_ENCRYPTED_MASK
;
702 * The done handler is called at device/channel end and wakes up the sleeping
706 tape_3590_done(struct tape_device
*device
, struct tape_request
*request
)
709 DBF_EVENT(6, "%s done\n", tape_op_verbose
[request
->op
]);
711 switch (request
->op
) {
725 tape_med_state_set(device
, MS_LOADED
);
728 tape_med_state_set(device
, MS_UNLOADED
);
729 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
732 tape_3590_med_state_set(device
, request
->cpdata
);
735 TAPE_3590_CRYPT_INFO(device
).status
736 |= TAPE390_CRYPT_ON_MASK
;
737 *(device
->modeset_byte
) |= 0x03;
740 TAPE_3590_CRYPT_INFO(device
).status
741 &= ~TAPE390_CRYPT_ON_MASK
;
742 *(device
->modeset_byte
) &= ~0x03;
744 case TO_RBI
: /* RBI seems to succeed even without medium loaded. */
745 case TO_NOP
: /* Same to NOP. */
757 return TAPE_IO_SUCCESS
;
761 * This function is called, when error recovery was successful
764 tape_3590_erp_succeded(struct tape_device
*device
, struct tape_request
*request
)
766 DBF_EVENT(3, "Error Recovery successful for %s\n",
767 tape_op_verbose
[request
->op
]);
768 return tape_3590_done(device
, request
);
772 * This function is called, when error recovery was not successful
775 tape_3590_erp_failed(struct tape_device
*device
, struct tape_request
*request
,
776 struct irb
*irb
, int rc
)
778 DBF_EVENT(3, "Error Recovery failed for %s\n",
779 tape_op_verbose
[request
->op
]);
780 tape_dump_sense_dbf(device
, request
, irb
);
785 * Error Recovery do retry
788 tape_3590_erp_retry(struct tape_device
*device
, struct tape_request
*request
,
791 DBF_EVENT(2, "Retry: %s\n", tape_op_verbose
[request
->op
]);
792 tape_dump_sense_dbf(device
, request
, irb
);
793 return TAPE_IO_RETRY
;
797 * Handle unsolicited interrupts
800 tape_3590_unsolicited_irq(struct tape_device
*device
, struct irb
*irb
)
802 if (irb
->scsw
.cmd
.dstat
== DEV_STAT_CHN_END
)
803 /* Probably result of halt ssch */
804 return TAPE_IO_PENDING
;
805 else if (irb
->scsw
.cmd
.dstat
== 0x85)
807 DBF_EVENT(3, "unsol.irq! tape ready: %08x\n", device
->cdev_id
);
808 else if (irb
->scsw
.cmd
.dstat
& DEV_STAT_ATTENTION
) {
809 tape_3590_schedule_work(device
, TO_READ_ATTMSG
);
811 DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device
->cdev_id
);
812 tape_dump_sense_dbf(device
, NULL
, irb
);
814 /* check medium state */
815 tape_3590_schedule_work(device
, TO_MSEN
);
816 return TAPE_IO_SUCCESS
;
820 * Basic Recovery routine
823 tape_3590_erp_basic(struct tape_device
*device
, struct tape_request
*request
,
824 struct irb
*irb
, int rc
)
826 struct tape_3590_sense
*sense
;
828 sense
= (struct tape_3590_sense
*) irb
->ecw
;
830 switch (sense
->bra
) {
832 return tape_3590_erp_failed(device
, request
, irb
, rc
);
834 return tape_3590_erp_succeded(device
, request
);
836 return tape_3590_erp_retry(device
, request
, irb
);
838 return tape_3590_erp_failed(device
, request
, irb
, rc
);
846 * RDL: Read Device (buffered) log
849 tape_3590_erp_read_buf_log(struct tape_device
*device
,
850 struct tape_request
*request
, struct irb
*irb
)
853 * We just do the basic error recovery at the moment (retry).
854 * Perhaps in the future, we read the log and dump it somewhere...
856 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
863 tape_3590_erp_swap(struct tape_device
*device
, struct tape_request
*request
,
867 * This error recovery should swap the tapes
868 * if the original has a problem. The operation
869 * should proceed with the new tape... this
870 * should probably be done in user space!
872 dev_warn (&device
->cdev
->dev
, "The tape medium must be loaded into a "
873 "different tape unit\n");
874 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
881 tape_3590_erp_long_busy(struct tape_device
*device
,
882 struct tape_request
*request
, struct irb
*irb
)
884 DBF_EVENT(6, "Device is busy\n");
885 return TAPE_IO_LONG_BUSY
;
889 * SPI: Special Intercept
892 tape_3590_erp_special_interrupt(struct tape_device
*device
,
893 struct tape_request
*request
, struct irb
*irb
)
895 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
899 * RDA: Read Alternate
902 tape_3590_erp_read_alternate(struct tape_device
*device
,
903 struct tape_request
*request
, struct irb
*irb
)
905 struct tape_3590_disc_data
*data
;
908 * The issued Read Backward or Read Previous command is not
909 * supported by the device
910 * The recovery action should be to issue another command:
911 * Read Revious: if Read Backward is not supported
912 * Read Backward: if Read Previous is not supported
914 data
= device
->discdata
;
915 if (data
->read_back_op
== READ_PREVIOUS
) {
916 DBF_EVENT(2, "(%08x): No support for READ_PREVIOUS command\n",
918 data
->read_back_op
= READ_BACKWARD
;
920 DBF_EVENT(2, "(%08x): No support for READ_BACKWARD command\n",
922 data
->read_back_op
= READ_PREVIOUS
;
924 tape_3590_read_opposite(device
, request
);
925 return tape_3590_erp_retry(device
, request
, irb
);
929 * Error Recovery read opposite
932 tape_3590_erp_read_opposite(struct tape_device
*device
,
933 struct tape_request
*request
, struct irb
*irb
)
935 switch (request
->op
) {
938 * We did read forward, but the data could not be read.
939 * We will read backward and then skip forward again.
941 tape_3590_read_opposite(device
, request
);
942 return tape_3590_erp_retry(device
, request
, irb
);
944 /* We tried to read forward and backward, but hat no success */
945 return tape_3590_erp_failed(device
, request
, irb
, -EIO
);
948 return tape_3590_erp_failed(device
, request
, irb
, -EIO
);
953 * Print an MIM (Media Information Message) (message code f0)
956 tape_3590_print_mim_msg_f0(struct tape_device
*device
, struct irb
*irb
)
958 struct tape_3590_sense
*sense
;
959 char *exception
, *service
;
961 exception
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
962 service
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
964 if (!exception
|| !service
)
967 sense
= (struct tape_3590_sense
*) irb
->ecw
;
968 /* Exception Message */
969 switch (sense
->fmt
.f70
.emc
) {
971 snprintf(exception
, BUFSIZE
, "Data degraded");
974 snprintf(exception
, BUFSIZE
, "Data degraded in partion %i",
978 snprintf(exception
, BUFSIZE
, "Medium degraded");
981 snprintf(exception
, BUFSIZE
, "Medium degraded in partition %i",
985 snprintf(exception
, BUFSIZE
, "Block 0 Error");
988 snprintf(exception
, BUFSIZE
, "Medium Exception 0x%02x",
992 snprintf(exception
, BUFSIZE
, "0x%02x",
996 /* Service Message */
997 switch (sense
->fmt
.f70
.smc
) {
999 snprintf(service
, BUFSIZE
, "Reference Media maintenance "
1000 "procedure %i", sense
->fmt
.f70
.md
);
1003 snprintf(service
, BUFSIZE
, "0x%02x",
1004 sense
->fmt
.f70
.smc
);
1008 dev_warn (&device
->cdev
->dev
, "Tape media information: exception %s, "
1009 "service %s\n", exception
, service
);
1017 * Print an I/O Subsystem Service Information Message (message code f1)
1020 tape_3590_print_io_sim_msg_f1(struct tape_device
*device
, struct irb
*irb
)
1022 struct tape_3590_sense
*sense
;
1023 char *exception
, *service
;
1025 exception
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1026 service
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1028 if (!exception
|| !service
)
1031 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1032 /* Exception Message */
1033 switch (sense
->fmt
.f71
.emc
) {
1035 snprintf(exception
, BUFSIZE
, "Effect of failure is unknown");
1038 snprintf(exception
, BUFSIZE
, "CU Exception - no performance "
1042 snprintf(exception
, BUFSIZE
, "CU Exception on channel "
1043 "interface 0x%02x", sense
->fmt
.f71
.md
[0]);
1046 snprintf(exception
, BUFSIZE
, "CU Exception on device path "
1047 "0x%02x", sense
->fmt
.f71
.md
[0]);
1050 snprintf(exception
, BUFSIZE
, "CU Exception on library path "
1051 "0x%02x", sense
->fmt
.f71
.md
[0]);
1054 snprintf(exception
, BUFSIZE
, "CU Exception on node 0x%02x",
1055 sense
->fmt
.f71
.md
[0]);
1058 snprintf(exception
, BUFSIZE
, "CU Exception on partition "
1059 "0x%02x", sense
->fmt
.f71
.md
[0]);
1062 snprintf(exception
, BUFSIZE
, "0x%02x",
1063 sense
->fmt
.f71
.emc
);
1065 /* Service Message */
1066 switch (sense
->fmt
.f71
.smc
) {
1068 snprintf(service
, BUFSIZE
, "Repair impact is unknown");
1071 snprintf(service
, BUFSIZE
, "Repair will not impact cu "
1075 if (sense
->fmt
.f71
.mdf
== 0)
1076 snprintf(service
, BUFSIZE
, "Repair will disable node "
1077 "0x%x on CU", sense
->fmt
.f71
.md
[1]);
1079 snprintf(service
, BUFSIZE
, "Repair will disable "
1080 "nodes (0x%x-0x%x) on CU", sense
->fmt
.f71
.md
[1],
1081 sense
->fmt
.f71
.md
[2]);
1084 if (sense
->fmt
.f71
.mdf
== 0)
1085 snprintf(service
, BUFSIZE
, "Repair will disable "
1086 "channel path 0x%x on CU",
1087 sense
->fmt
.f71
.md
[1]);
1089 snprintf(service
, BUFSIZE
, "Repair will disable channel"
1090 " paths (0x%x-0x%x) on CU",
1091 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1094 if (sense
->fmt
.f71
.mdf
== 0)
1095 snprintf(service
, BUFSIZE
, "Repair will disable device"
1096 " path 0x%x on CU", sense
->fmt
.f71
.md
[1]);
1098 snprintf(service
, BUFSIZE
, "Repair will disable device"
1099 " paths (0x%x-0x%x) on CU",
1100 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1103 if (sense
->fmt
.f71
.mdf
== 0)
1104 snprintf(service
, BUFSIZE
, "Repair will disable "
1105 "library path 0x%x on CU",
1106 sense
->fmt
.f71
.md
[1]);
1108 snprintf(service
, BUFSIZE
, "Repair will disable "
1109 "library paths (0x%x-0x%x) on CU",
1110 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1113 snprintf(service
, BUFSIZE
, "Repair will disable access to CU");
1116 snprintf(service
, BUFSIZE
, "0x%02x",
1117 sense
->fmt
.f71
.smc
);
1120 dev_warn (&device
->cdev
->dev
, "I/O subsystem information: exception"
1121 " %s, service %s\n", exception
, service
);
1128 * Print an Device Subsystem Service Information Message (message code f2)
1131 tape_3590_print_dev_sim_msg_f2(struct tape_device
*device
, struct irb
*irb
)
1133 struct tape_3590_sense
*sense
;
1134 char *exception
, *service
;
1136 exception
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1137 service
= kmalloc(BUFSIZE
, GFP_ATOMIC
);
1139 if (!exception
|| !service
)
1142 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1143 /* Exception Message */
1144 switch (sense
->fmt
.f71
.emc
) {
1146 snprintf(exception
, BUFSIZE
, "Effect of failure is unknown");
1149 snprintf(exception
, BUFSIZE
, "DV Exception - no performance"
1153 snprintf(exception
, BUFSIZE
, "DV Exception on channel "
1154 "interface 0x%02x", sense
->fmt
.f71
.md
[0]);
1157 snprintf(exception
, BUFSIZE
, "DV Exception on loader 0x%02x",
1158 sense
->fmt
.f71
.md
[0]);
1161 snprintf(exception
, BUFSIZE
, "DV Exception on message display"
1162 " 0x%02x", sense
->fmt
.f71
.md
[0]);
1165 snprintf(exception
, BUFSIZE
, "DV Exception in tape path");
1168 snprintf(exception
, BUFSIZE
, "DV Exception in drive");
1171 snprintf(exception
, BUFSIZE
, "0x%02x",
1172 sense
->fmt
.f71
.emc
);
1174 /* Service Message */
1175 switch (sense
->fmt
.f71
.smc
) {
1177 snprintf(service
, BUFSIZE
, "Repair impact is unknown");
1180 snprintf(service
, BUFSIZE
, "Repair will not impact device "
1184 if (sense
->fmt
.f71
.mdf
== 0)
1185 snprintf(service
, BUFSIZE
, "Repair will disable "
1186 "channel path 0x%x on DV",
1187 sense
->fmt
.f71
.md
[1]);
1189 snprintf(service
, BUFSIZE
, "Repair will disable "
1190 "channel path (0x%x-0x%x) on DV",
1191 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1194 if (sense
->fmt
.f71
.mdf
== 0)
1195 snprintf(service
, BUFSIZE
, "Repair will disable "
1196 "interface 0x%x on DV", sense
->fmt
.f71
.md
[1]);
1198 snprintf(service
, BUFSIZE
, "Repair will disable "
1199 "interfaces (0x%x-0x%x) on DV",
1200 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1203 if (sense
->fmt
.f71
.mdf
== 0)
1204 snprintf(service
, BUFSIZE
, "Repair will disable loader"
1205 " 0x%x on DV", sense
->fmt
.f71
.md
[1]);
1207 snprintf(service
, BUFSIZE
, "Repair will disable loader"
1208 " (0x%x-0x%x) on DV",
1209 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1212 snprintf(service
, BUFSIZE
, "Repair will disable access to DV");
1215 if (sense
->fmt
.f71
.mdf
== 0)
1216 snprintf(service
, BUFSIZE
, "Repair will disable "
1217 "message display 0x%x on DV",
1218 sense
->fmt
.f71
.md
[1]);
1220 snprintf(service
, BUFSIZE
, "Repair will disable "
1221 "message displays (0x%x-0x%x) on DV",
1222 sense
->fmt
.f71
.md
[1], sense
->fmt
.f71
.md
[2]);
1225 snprintf(service
, BUFSIZE
, "Clean DV");
1228 snprintf(service
, BUFSIZE
, "0x%02x",
1229 sense
->fmt
.f71
.smc
);
1232 dev_warn (&device
->cdev
->dev
, "Device subsystem information: exception"
1233 " %s, service %s\n", exception
, service
);
1240 * Print standard ERA Message
1243 tape_3590_print_era_msg(struct tape_device
*device
, struct irb
*irb
)
1245 struct tape_3590_sense
*sense
;
1247 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1250 if ((sense
->mc
> 0) && (sense
->mc
< TAPE_3590_MAX_MSG
)) {
1251 if (tape_3590_msg
[sense
->mc
] != NULL
)
1252 dev_warn (&device
->cdev
->dev
, "The tape unit has "
1253 "issued sense message %s\n",
1254 tape_3590_msg
[sense
->mc
]);
1256 dev_warn (&device
->cdev
->dev
, "The tape unit has "
1257 "issued an unknown sense message code 0x%x\n",
1261 if (sense
->mc
== 0xf0) {
1262 /* Standard Media Information Message */
1263 dev_warn (&device
->cdev
->dev
, "MIM SEV=%i, MC=%02x, ES=%x/%x, "
1264 "RC=%02x-%04x-%02x\n", sense
->fmt
.f70
.sev
, sense
->mc
,
1265 sense
->fmt
.f70
.emc
, sense
->fmt
.f70
.smc
,
1266 sense
->fmt
.f70
.refcode
, sense
->fmt
.f70
.mid
,
1267 sense
->fmt
.f70
.fid
);
1268 tape_3590_print_mim_msg_f0(device
, irb
);
1271 if (sense
->mc
== 0xf1) {
1272 /* Standard I/O Subsystem Service Information Message */
1273 dev_warn (&device
->cdev
->dev
, "IOSIM SEV=%i, DEVTYPE=3590/%02x,"
1274 " MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
1275 sense
->fmt
.f71
.sev
, device
->cdev
->id
.dev_model
,
1276 sense
->mc
, sense
->fmt
.f71
.emc
, sense
->fmt
.f71
.smc
,
1277 sense
->fmt
.f71
.refcode1
, sense
->fmt
.f71
.refcode2
,
1278 sense
->fmt
.f71
.refcode3
);
1279 tape_3590_print_io_sim_msg_f1(device
, irb
);
1282 if (sense
->mc
== 0xf2) {
1283 /* Standard Device Service Information Message */
1284 dev_warn (&device
->cdev
->dev
, "DEVSIM SEV=%i, DEVTYPE=3590/%02x"
1285 ", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
1286 sense
->fmt
.f71
.sev
, device
->cdev
->id
.dev_model
,
1287 sense
->mc
, sense
->fmt
.f71
.emc
, sense
->fmt
.f71
.smc
,
1288 sense
->fmt
.f71
.refcode1
, sense
->fmt
.f71
.refcode2
,
1289 sense
->fmt
.f71
.refcode3
);
1290 tape_3590_print_dev_sim_msg_f2(device
, irb
);
1293 if (sense
->mc
== 0xf3) {
1294 /* Standard Library Service Information Message */
1297 dev_warn (&device
->cdev
->dev
, "The tape unit has issued an unknown "
1298 "sense message code %x\n", sense
->mc
);
1301 static int tape_3590_crypt_error(struct tape_device
*device
,
1302 struct tape_request
*request
, struct irb
*irb
)
1308 sense
= ((struct tape_3590_sense
*) irb
->ecw
)->fmt
.data
;
1310 ekm_rc2
= *((u16
*) &sense
[10]);
1311 if ((cu_rc
== 0) && (ekm_rc2
== 0xee31))
1312 /* key not defined on EKM */
1313 return tape_3590_erp_basic(device
, request
, irb
, -EKEYREJECTED
);
1314 if ((cu_rc
== 1) || (cu_rc
== 2))
1315 /* No connection to EKM */
1316 return tape_3590_erp_basic(device
, request
, irb
, -ENOTCONN
);
1318 dev_err (&device
->cdev
->dev
, "The tape unit failed to obtain the "
1319 "encryption key from EKM\n");
1321 return tape_3590_erp_basic(device
, request
, irb
, -ENOKEY
);
1325 * 3590 error Recovery routine:
1326 * If possible, it tries to recover from the error. If this is not possible,
1327 * inform the user about the problem.
1330 tape_3590_unit_check(struct tape_device
*device
, struct tape_request
*request
,
1333 struct tape_3590_sense
*sense
;
1335 sense
= (struct tape_3590_sense
*) irb
->ecw
;
1337 DBF_EVENT(6, "Unit Check: RQC = %x\n", sense
->rc_rqc
);
1340 * First check all RC-QRCs where we want to do something special
1341 * - "break": basic error recovery is done
1342 * - "goto out:": just print error message if available
1344 switch (sense
->rc_rqc
) {
1347 tape_3590_print_era_msg(device
, irb
);
1348 return tape_3590_erp_read_buf_log(device
, request
, irb
);
1351 tape_3590_print_era_msg(device
, irb
);
1352 return tape_3590_erp_read_alternate(device
, request
, irb
);
1356 tape_3590_print_era_msg(device
, irb
);
1357 return tape_3590_erp_special_interrupt(device
, request
, irb
);
1359 return tape_3590_crypt_error(device
, request
, irb
);
1362 DBF_EVENT(2, "(%08x): Backward at Beginning of Partition\n",
1364 return tape_3590_erp_basic(device
, request
, irb
, -ENOSPC
);
1366 DBF_EVENT(2, "(%08x): Forward at End of Partition\n",
1368 return tape_3590_erp_basic(device
, request
, irb
, -ENOSPC
);
1370 DBF_EVENT(2, "(%08x): End of Data Mark\n", device
->cdev_id
);
1371 return tape_3590_erp_basic(device
, request
, irb
, -ENOSPC
);
1374 DBF_EVENT(2, "(%08x): Rewind Unload initiated\n",
1376 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
1378 DBF_EVENT(2, "(%08x): Rewind Unload complete\n",
1380 tape_med_state_set(device
, MS_UNLOADED
);
1381 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
1382 return tape_3590_erp_basic(device
, request
, irb
, 0);
1386 * print additional msg since default msg
1387 * "device intervention" is not very meaningfull
1389 tape_med_state_set(device
, MS_UNLOADED
);
1390 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
1391 return tape_3590_erp_basic(device
, request
, irb
, -ENOMEDIUM
);
1392 case 0x4012: /* Device Long Busy */
1393 /* XXX: Also use long busy handling here? */
1394 DBF_EVENT(6, "(%08x): LONG BUSY\n", device
->cdev_id
);
1395 tape_3590_print_era_msg(device
, irb
);
1396 return tape_3590_erp_basic(device
, request
, irb
, -EBUSY
);
1398 DBF_EVENT(6, "(%08x): Crypto LONG BUSY\n", device
->cdev_id
);
1399 return tape_3590_erp_long_busy(device
, request
, irb
);
1402 if (sense
->rac
== 0xd0) {
1404 tape_3590_print_era_msg(device
, irb
);
1405 return tape_3590_erp_swap(device
, request
, irb
);
1407 if (sense
->rac
== 0x26) {
1409 tape_3590_print_era_msg(device
, irb
);
1410 return tape_3590_erp_read_opposite(device
, request
,
1413 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
1420 tape_3590_print_era_msg(device
, irb
);
1421 return tape_3590_erp_swap(device
, request
, irb
);
1425 return tape_3590_erp_basic(device
, request
, irb
, -EMEDIUMTYPE
);
1429 tape_med_state_set(device
, MS_UNLOADED
);
1430 tape_3590_schedule_work(device
, TO_CRYPT_OFF
);
1431 return tape_3590_erp_basic(device
, request
, irb
, -ENOMEDIUM
);
1434 return tape_3590_erp_basic(device
, request
, irb
, -EMEDIUMTYPE
);
1437 return tape_3590_erp_basic(device
, request
, irb
, -EPERM
);
1439 dev_warn (&device
->cdev
->dev
, "A different host has privileged"
1440 " access to the tape unit\n");
1441 return tape_3590_erp_basic(device
, request
, irb
, -EPERM
);
1443 return tape_3590_erp_basic(device
, request
, irb
, -EIO
);
1448 * 3590 interrupt handler:
1451 tape_3590_irq(struct tape_device
*device
, struct tape_request
*request
,
1454 if (request
== NULL
)
1455 return tape_3590_unsolicited_irq(device
, irb
);
1457 if ((irb
->scsw
.cmd
.dstat
& DEV_STAT_UNIT_EXCEP
) &&
1458 (irb
->scsw
.cmd
.dstat
& DEV_STAT_DEV_END
) &&
1459 (request
->op
== TO_WRI
)) {
1460 /* Write at end of volume */
1461 DBF_EVENT(2, "End of volume\n");
1462 return tape_3590_erp_failed(device
, request
, irb
, -ENOSPC
);
1465 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_UNIT_CHECK
)
1466 return tape_3590_unit_check(device
, request
, irb
);
1468 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_DEV_END
) {
1469 if (irb
->scsw
.cmd
.dstat
== DEV_STAT_UNIT_EXCEP
) {
1470 if (request
->op
== TO_FSB
|| request
->op
== TO_BSB
)
1473 DBF_EVENT(5, "Unit Exception!\n");
1476 return tape_3590_done(device
, request
);
1479 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_CHN_END
) {
1480 DBF_EVENT(2, "channel end\n");
1481 return TAPE_IO_PENDING
;
1484 if (irb
->scsw
.cmd
.dstat
& DEV_STAT_ATTENTION
) {
1485 DBF_EVENT(2, "Unit Attention when busy..\n");
1486 return TAPE_IO_PENDING
;
1489 DBF_EVENT(6, "xunknownirq\n");
1490 tape_dump_sense_dbf(device
, request
, irb
);
1491 return TAPE_IO_STOP
;
1495 static int tape_3590_read_dev_chars(struct tape_device
*device
,
1496 struct tape_3590_rdc_data
*rdc_data
)
1499 struct tape_request
*request
;
1501 request
= tape_alloc_request(1, sizeof(*rdc_data
));
1502 if (IS_ERR(request
))
1503 return PTR_ERR(request
);
1504 request
->op
= TO_RDC
;
1505 tape_ccw_end(request
->cpaddr
, CCW_CMD_RDC
, sizeof(*rdc_data
),
1507 rc
= tape_do_io(device
, request
);
1509 memcpy(rdc_data
, request
->cpdata
, sizeof(*rdc_data
));
1510 tape_free_request(request
);
1515 * Setup device function
1518 tape_3590_setup_device(struct tape_device
*device
)
1521 struct tape_3590_disc_data
*data
;
1522 struct tape_3590_rdc_data
*rdc_data
;
1524 DBF_EVENT(6, "3590 device setup\n");
1525 data
= kzalloc(sizeof(struct tape_3590_disc_data
), GFP_KERNEL
| GFP_DMA
);
1528 data
->read_back_op
= READ_PREVIOUS
;
1529 device
->discdata
= data
;
1531 rdc_data
= kmalloc(sizeof(*rdc_data
), GFP_KERNEL
| GFP_DMA
);
1536 rc
= tape_3590_read_dev_chars(device
, rdc_data
);
1538 DBF_LH(3, "Read device characteristics failed!\n");
1541 rc
= tape_std_assign(device
);
1544 if (rdc_data
->data
[31] == 0x13) {
1545 data
->crypt_info
.capability
|= TAPE390_CRYPT_SUPPORTED_MASK
;
1546 tape_3592_disable_crypt(device
);
1548 DBF_EVENT(6, "Device has NO crypto support\n");
1550 /* Try to find out if medium is loaded */
1551 rc
= tape_3590_sense_medium(device
);
1553 DBF_LH(3, "3590 medium sense returned %d\n", rc
);
1566 * Cleanup device function
1569 tape_3590_cleanup_device(struct tape_device
*device
)
1571 flush_workqueue(tape_3590_wq
);
1572 tape_std_unassign(device
);
1574 kfree(device
->discdata
);
1575 device
->discdata
= NULL
;
1579 * List of 3590 magnetic tape commands.
1581 static tape_mtop_fn tape_3590_mtop
[TAPE_NR_MTOPS
] = {
1582 [MTRESET
] = tape_std_mtreset
,
1583 [MTFSF
] = tape_std_mtfsf
,
1584 [MTBSF
] = tape_std_mtbsf
,
1585 [MTFSR
] = tape_std_mtfsr
,
1586 [MTBSR
] = tape_std_mtbsr
,
1587 [MTWEOF
] = tape_std_mtweof
,
1588 [MTREW
] = tape_std_mtrew
,
1589 [MTOFFL
] = tape_std_mtoffl
,
1590 [MTNOP
] = tape_std_mtnop
,
1591 [MTRETEN
] = tape_std_mtreten
,
1592 [MTBSFM
] = tape_std_mtbsfm
,
1593 [MTFSFM
] = tape_std_mtfsfm
,
1594 [MTEOM
] = tape_std_mteom
,
1595 [MTERASE
] = tape_std_mterase
,
1599 [MTSETBLK
] = tape_std_mtsetblk
,
1600 [MTSETDENSITY
] = NULL
,
1601 [MTSEEK
] = tape_3590_mtseek
,
1602 [MTTELL
] = tape_3590_mttell
,
1603 [MTSETDRVBUFFER
] = NULL
,
1609 [MTLOAD
] = tape_std_mtload
,
1610 [MTUNLOAD
] = tape_std_mtunload
,
1611 [MTCOMPRESSION
] = tape_std_mtcompression
,
1617 * Tape discipline structure for 3590.
1619 static struct tape_discipline tape_discipline_3590
= {
1620 .owner
= THIS_MODULE
,
1621 .setup_device
= tape_3590_setup_device
,
1622 .cleanup_device
= tape_3590_cleanup_device
,
1623 .process_eov
= tape_std_process_eov
,
1624 .irq
= tape_3590_irq
,
1625 .read_block
= tape_std_read_block
,
1626 .write_block
= tape_std_write_block
,
1627 .ioctl_fn
= tape_3590_ioctl
,
1628 .mtop_array
= tape_3590_mtop
1631 static struct ccw_device_id tape_3590_ids
[] = {
1632 {CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info
= tape_3590
},
1633 {CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info
= tape_3592
},
1634 { /* end of list */ }
1638 tape_3590_online(struct ccw_device
*cdev
)
1640 return tape_generic_online(dev_get_drvdata(&cdev
->dev
),
1641 &tape_discipline_3590
);
1644 static struct ccw_driver tape_3590_driver
= {
1646 .name
= "tape_3590",
1647 .owner
= THIS_MODULE
,
1649 .ids
= tape_3590_ids
,
1650 .probe
= tape_generic_probe
,
1651 .remove
= tape_generic_remove
,
1652 .set_offline
= tape_generic_offline
,
1653 .set_online
= tape_3590_online
,
1654 .freeze
= tape_generic_pm_suspend
,
1655 .int_class
= IRQIO_TAP
,
1659 * Setup discipline structure.
1662 tape_3590_init(void)
1666 TAPE_DBF_AREA
= debug_register("tape_3590", 2, 2, 4 * sizeof(long));
1667 debug_register_view(TAPE_DBF_AREA
, &debug_sprintf_view
);
1668 #ifdef DBF_LIKE_HELL
1669 debug_set_level(TAPE_DBF_AREA
, 6);
1672 DBF_EVENT(3, "3590 init\n");
1674 tape_3590_wq
= alloc_workqueue("tape_3590", 0, 0);
1678 /* Register driver for 3590 tapes. */
1679 rc
= ccw_driver_register(&tape_3590_driver
);
1681 destroy_workqueue(tape_3590_wq
);
1682 DBF_EVENT(3, "3590 init failed\n");
1684 DBF_EVENT(3, "3590 registered\n");
1689 tape_3590_exit(void)
1691 ccw_driver_unregister(&tape_3590_driver
);
1692 destroy_workqueue(tape_3590_wq
);
1693 debug_unregister(TAPE_DBF_AREA
);
1696 MODULE_DEVICE_TABLE(ccw
, tape_3590_ids
);
1697 MODULE_AUTHOR("(C) 2001,2006 IBM Corporation");
1698 MODULE_DESCRIPTION("Linux on zSeries channel attached 3590 tape device driver");
1699 MODULE_LICENSE("GPL");
1701 module_init(tape_3590_init
);
1702 module_exit(tape_3590_exit
);