?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
mm/hmm.c: remove superfluous RCU protection around radix tree lookup
[linux/fpc-iii.git] / drivers / usb / dwc3 / core.c
bloba15648d25e30c46eb6eaa3336375a545980ec1e3
1 // SPDX-License-Identifier: GPL-2.0
2 /**
3 * core.c - DesignWare USB3 DRD Controller Core file
4 *
5 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
6 *
7 * Authors: Felipe Balbi <balbi@ti.com>,
8 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9 */
10
11 #include <linux/version.h>
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/slab.h>
15 #include <linux/spinlock.h>
16 #include <linux/platform_device.h>
17 #include <linux/pm_runtime.h>
18 #include <linux/interrupt.h>
19 #include <linux/ioport.h>
20 #include <linux/io.h>
21 #include <linux/list.h>
22 #include <linux/delay.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/of.h>
25 #include <linux/acpi.h>
26 #include <linux/pinctrl/consumer.h>
27
28 #include <linux/usb/ch9.h>
29 #include <linux/usb/gadget.h>
30 #include <linux/usb/of.h>
31 #include <linux/usb/otg.h>
32
33 #include "core.h"
34 #include "gadget.h"
35 #include "io.h"
36
37 #include "debug.h"
38
39 #define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */
40
41 /**
42 * dwc3_get_dr_mode - Validates and sets dr_mode
43 * @dwc: pointer to our context structure
44 */
45 static int dwc3_get_dr_mode(struct dwc3 *dwc)
46 {
47 enum usb_dr_mode mode;
48 struct device *dev = dwc->dev;
49 unsigned int hw_mode;
50
51 if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
52 dwc->dr_mode = USB_DR_MODE_OTG;
53
54 mode = dwc->dr_mode;
55 hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
56
57 switch (hw_mode) {
58 case DWC3_GHWPARAMS0_MODE_GADGET:
59 if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) {
60 dev_err(dev,
61 "Controller does not support host mode.\n");
62 return -EINVAL;
63 }
64 mode = USB_DR_MODE_PERIPHERAL;
65 break;
66 case DWC3_GHWPARAMS0_MODE_HOST:
67 if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
68 dev_err(dev,
69 "Controller does not support device mode.\n");
70 return -EINVAL;
71 }
72 mode = USB_DR_MODE_HOST;
73 break;
74 default:
75 if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
76 mode = USB_DR_MODE_HOST;
77 else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
78 mode = USB_DR_MODE_PERIPHERAL;
79 }
80
81 if (mode != dwc->dr_mode) {
82 dev_warn(dev,
83 "Configuration mismatch. dr_mode forced to %s\n",
84 mode == USB_DR_MODE_HOST ? "host" : "gadget");
85
86 dwc->dr_mode = mode;
87 }
88
89 return 0;
90 }
91
92 void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
93 {
94 u32 reg;
95
96 reg = dwc3_readl(dwc->regs, DWC3_GCTL);
97 reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
98 reg |= DWC3_GCTL_PRTCAPDIR(mode);
99 dwc3_writel(dwc->regs, DWC3_GCTL, reg);
100
101 dwc->current_dr_role = mode;
102 }
103
104 static void __dwc3_set_mode(struct work_struct *work)
105 {
106 struct dwc3 *dwc = work_to_dwc(work);
107 unsigned long flags;
108 int ret;
109
110 if (dwc->dr_mode != USB_DR_MODE_OTG)
111 return;
112
113 if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_OTG)
114 dwc3_otg_update(dwc, 0);
115
116 if (!dwc->desired_dr_role)
117 return;
118
119 if (dwc->desired_dr_role == dwc->current_dr_role)
120 return;
121
122 if (dwc->desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev)
123 return;
124
125 switch (dwc->current_dr_role) {
126 case DWC3_GCTL_PRTCAP_HOST:
127 dwc3_host_exit(dwc);
128 break;
129 case DWC3_GCTL_PRTCAP_DEVICE:
130 dwc3_gadget_exit(dwc);
131 dwc3_event_buffers_cleanup(dwc);
132 break;
133 case DWC3_GCTL_PRTCAP_OTG:
134 dwc3_otg_exit(dwc);
135 spin_lock_irqsave(&dwc->lock, flags);
136 dwc->desired_otg_role = DWC3_OTG_ROLE_IDLE;
137 spin_unlock_irqrestore(&dwc->lock, flags);
138 dwc3_otg_update(dwc, 1);
139 break;
140 default:
141 break;
142 }
143
144 spin_lock_irqsave(&dwc->lock, flags);
145
146 dwc3_set_prtcap(dwc, dwc->desired_dr_role);
147
148 spin_unlock_irqrestore(&dwc->lock, flags);
149
150 switch (dwc->desired_dr_role) {
151 case DWC3_GCTL_PRTCAP_HOST:
152 ret = dwc3_host_init(dwc);
153 if (ret) {
154 dev_err(dwc->dev, "failed to initialize host\n");
155 } else {
156 if (dwc->usb2_phy)
157 otg_set_vbus(dwc->usb2_phy->otg, true);
158 phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
159 phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
160 phy_calibrate(dwc->usb2_generic_phy);
161 }
162 break;
163 case DWC3_GCTL_PRTCAP_DEVICE:
164 dwc3_event_buffers_setup(dwc);
165
166 if (dwc->usb2_phy)
167 otg_set_vbus(dwc->usb2_phy->otg, false);
168 phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
169 phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
170
171 ret = dwc3_gadget_init(dwc);
172 if (ret)
173 dev_err(dwc->dev, "failed to initialize peripheral\n");
174 break;
175 case DWC3_GCTL_PRTCAP_OTG:
176 dwc3_otg_init(dwc);
177 dwc3_otg_update(dwc, 0);
178 break;
179 default:
180 break;
181 }
182
183 }
184
185 void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
186 {
187 unsigned long flags;
188
189 spin_lock_irqsave(&dwc->lock, flags);
190 dwc->desired_dr_role = mode;
191 spin_unlock_irqrestore(&dwc->lock, flags);
192
193 queue_work(system_freezable_wq, &dwc->drd_work);
194 }
195
196 u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type)
197 {
198 struct dwc3 *dwc = dep->dwc;
199 u32 reg;
200
201 dwc3_writel(dwc->regs, DWC3_GDBGFIFOSPACE,
202 DWC3_GDBGFIFOSPACE_NUM(dep->number) |
203 DWC3_GDBGFIFOSPACE_TYPE(type));
204
205 reg = dwc3_readl(dwc->regs, DWC3_GDBGFIFOSPACE);
206
207 return DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(reg);
208 }
209
210 /**
211 * dwc3_core_soft_reset - Issues core soft reset and PHY reset
212 * @dwc: pointer to our context structure
213 */
214 static int dwc3_core_soft_reset(struct dwc3 *dwc)
215 {
216 u32 reg;
217 int retries = 1000;
218 int ret;
219
220 usb_phy_init(dwc->usb2_phy);
221 usb_phy_init(dwc->usb3_phy);
222 ret = phy_init(dwc->usb2_generic_phy);
223 if (ret < 0)
224 return ret;
225
226 ret = phy_init(dwc->usb3_generic_phy);
227 if (ret < 0) {
228 phy_exit(dwc->usb2_generic_phy);
229 return ret;
230 }
231
232 /*
233 * We're resetting only the device side because, if we're in host mode,
234 * XHCI driver will reset the host block. If dwc3 was configured for
235 * host-only mode, then we can return early.
236 */
237 if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
238 return 0;
239
240 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
241 reg |= DWC3_DCTL_CSFTRST;
242 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
243
244 do {
245 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
246 if (!(reg & DWC3_DCTL_CSFTRST))
247 goto done;
248
249 udelay(1);
250 } while (--retries);
251
252 phy_exit(dwc->usb3_generic_phy);
253 phy_exit(dwc->usb2_generic_phy);
254
255 return -ETIMEDOUT;
256
257 done:
258 /*
259 * For DWC_usb31 controller, once DWC3_DCTL_CSFTRST bit is cleared,
260 * we must wait at least 50ms before accessing the PHY domain
261 * (synchronization delay). DWC_usb31 programming guide section 1.3.2.
262 */
263 if (dwc3_is_usb31(dwc))
264 msleep(50);
265
266 return 0;
267 }
268
269 /*
270 * dwc3_frame_length_adjustment - Adjusts frame length if required
271 * @dwc3: Pointer to our controller context structure
272 */
273 static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
274 {
275 u32 reg;
276 u32 dft;
277
278 if (dwc->revision < DWC3_REVISION_250A)
279 return;
280
281 if (dwc->fladj == 0)
282 return;
283
284 reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
285 dft = reg & DWC3_GFLADJ_30MHZ_MASK;
286 if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj,
287 "request value same as default, ignoring\n")) {
288 reg &= ~DWC3_GFLADJ_30MHZ_MASK;
289 reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
290 dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
291 }
292 }
293
294 /**
295 * dwc3_free_one_event_buffer - Frees one event buffer
296 * @dwc: Pointer to our controller context structure
297 * @evt: Pointer to event buffer to be freed
298 */
299 static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
300 struct dwc3_event_buffer *evt)
301 {
302 dma_free_coherent(dwc->sysdev, evt->length, evt->buf, evt->dma);
303 }
304
305 /**
306 * dwc3_alloc_one_event_buffer - Allocates one event buffer structure
307 * @dwc: Pointer to our controller context structure
308 * @length: size of the event buffer
309 *
310 * Returns a pointer to the allocated event buffer structure on success
311 * otherwise ERR_PTR(errno).
312 */
313 static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc,
314 unsigned length)
315 {
316 struct dwc3_event_buffer *evt;
317
318 evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL);
319 if (!evt)
320 return ERR_PTR(-ENOMEM);
321
322 evt->dwc = dwc;
323 evt->length = length;
324 evt->cache = devm_kzalloc(dwc->dev, length, GFP_KERNEL);
325 if (!evt->cache)
326 return ERR_PTR(-ENOMEM);
327
328 evt->buf = dma_alloc_coherent(dwc->sysdev, length,
329 &evt->dma, GFP_KERNEL);
330 if (!evt->buf)
331 return ERR_PTR(-ENOMEM);
332
333 return evt;
334 }
335
336 /**
337 * dwc3_free_event_buffers - frees all allocated event buffers
338 * @dwc: Pointer to our controller context structure
339 */
340 static void dwc3_free_event_buffers(struct dwc3 *dwc)
341 {
342 struct dwc3_event_buffer *evt;
343
344 evt = dwc->ev_buf;
345 if (evt)
346 dwc3_free_one_event_buffer(dwc, evt);
347 }
348
349 /**
350 * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
351 * @dwc: pointer to our controller context structure
352 * @length: size of event buffer
353 *
354 * Returns 0 on success otherwise negative errno. In the error case, dwc
355 * may contain some buffers allocated but not all which were requested.
356 */
357 static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
358 {
359 struct dwc3_event_buffer *evt;
360
361 evt = dwc3_alloc_one_event_buffer(dwc, length);
362 if (IS_ERR(evt)) {
363 dev_err(dwc->dev, "can't allocate event buffer\n");
364 return PTR_ERR(evt);
365 }
366 dwc->ev_buf = evt;
367
368 return 0;
369 }
370
371 /**
372 * dwc3_event_buffers_setup - setup our allocated event buffers
373 * @dwc: pointer to our controller context structure
374 *
375 * Returns 0 on success otherwise negative errno.
376 */
377 int dwc3_event_buffers_setup(struct dwc3 *dwc)
378 {
379 struct dwc3_event_buffer *evt;
380
381 evt = dwc->ev_buf;
382 evt->lpos = 0;
383 dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
384 lower_32_bits(evt->dma));
385 dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0),
386 upper_32_bits(evt->dma));
387 dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
388 DWC3_GEVNTSIZ_SIZE(evt->length));
389 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
390
391 return 0;
392 }
393
394 void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
395 {
396 struct dwc3_event_buffer *evt;
397
398 evt = dwc->ev_buf;
399
400 evt->lpos = 0;
401
402 dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), 0);
403 dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), 0);
404 dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_INTMASK
405 | DWC3_GEVNTSIZ_SIZE(0));
406 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
407 }
408
409 static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
410 {
411 if (!dwc->has_hibernation)
412 return 0;
413
414 if (!dwc->nr_scratch)
415 return 0;
416
417 dwc->scratchbuf = kmalloc_array(dwc->nr_scratch,
418 DWC3_SCRATCHBUF_SIZE, GFP_KERNEL);
419 if (!dwc->scratchbuf)
420 return -ENOMEM;
421
422 return 0;
423 }
424
425 static int dwc3_setup_scratch_buffers(struct dwc3 *dwc)
426 {
427 dma_addr_t scratch_addr;
428 u32 param;
429 int ret;
430
431 if (!dwc->has_hibernation)
432 return 0;
433
434 if (!dwc->nr_scratch)
435 return 0;
436
437 /* should never fall here */
438 if (!WARN_ON(dwc->scratchbuf))
439 return 0;
440
441 scratch_addr = dma_map_single(dwc->sysdev, dwc->scratchbuf,
442 dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE,
443 DMA_BIDIRECTIONAL);
444 if (dma_mapping_error(dwc->sysdev, scratch_addr)) {
445 dev_err(dwc->sysdev, "failed to map scratch buffer\n");
446 ret = -EFAULT;
447 goto err0;
448 }
449
450 dwc->scratch_addr = scratch_addr;
451
452 param = lower_32_bits(scratch_addr);
453
454 ret = dwc3_send_gadget_generic_command(dwc,
455 DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param);
456 if (ret < 0)
457 goto err1;
458
459 param = upper_32_bits(scratch_addr);
460
461 ret = dwc3_send_gadget_generic_command(dwc,
462 DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param);
463 if (ret < 0)
464 goto err1;
465
466 return 0;
467
468 err1:
469 dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch *
470 DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
471
472 err0:
473 return ret;
474 }
475
476 static void dwc3_free_scratch_buffers(struct dwc3 *dwc)
477 {
478 if (!dwc->has_hibernation)
479 return;
480
481 if (!dwc->nr_scratch)
482 return;
483
484 /* should never fall here */
485 if (!WARN_ON(dwc->scratchbuf))
486 return;
487
488 dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch *
489 DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL);
490 kfree(dwc->scratchbuf);
491 }
492
493 static void dwc3_core_num_eps(struct dwc3 *dwc)
494 {
495 struct dwc3_hwparams *parms = &dwc->hwparams;
496
497 dwc->num_eps = DWC3_NUM_EPS(parms);
498 }
499
500 static void dwc3_cache_hwparams(struct dwc3 *dwc)
501 {
502 struct dwc3_hwparams *parms = &dwc->hwparams;
503
504 parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0);
505 parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1);
506 parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2);
507 parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3);
508 parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4);
509 parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5);
510 parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6);
511 parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7);
512 parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8);
513 }
514
515 static int dwc3_core_ulpi_init(struct dwc3 *dwc)
516 {
517 int intf;
518 int ret = 0;
519
520 intf = DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3);
521
522 if (intf == DWC3_GHWPARAMS3_HSPHY_IFC_ULPI ||
523 (intf == DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI &&
524 dwc->hsphy_interface &&
525 !strncmp(dwc->hsphy_interface, "ulpi", 4)))
526 ret = dwc3_ulpi_init(dwc);
527
528 return ret;
529 }
530
531 /**
532 * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
533 * @dwc: Pointer to our controller context structure
534 *
535 * Returns 0 on success. The USB PHY interfaces are configured but not
536 * initialized. The PHY interfaces and the PHYs get initialized together with
537 * the core in dwc3_core_init.
538 */
539 static int dwc3_phy_setup(struct dwc3 *dwc)
540 {
541 u32 reg;
542
543 reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
544
545 /*
546 * Make sure UX_EXIT_PX is cleared as that causes issues with some
547 * PHYs. Also, this bit is not supposed to be used in normal operation.
548 */
549 reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX;
550
551 /*
552 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
553 * to '0' during coreConsultant configuration. So default value
554 * will be '0' when the core is reset. Application needs to set it
555 * to '1' after the core initialization is completed.
556 */
557 if (dwc->revision > DWC3_REVISION_194A)
558 reg |= DWC3_GUSB3PIPECTL_SUSPHY;
559
560 if (dwc->u2ss_inp3_quirk)
561 reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
562
563 if (dwc->dis_rxdet_inp3_quirk)
564 reg |= DWC3_GUSB3PIPECTL_DISRXDETINP3;
565
566 if (dwc->req_p1p2p3_quirk)
567 reg |= DWC3_GUSB3PIPECTL_REQP1P2P3;
568
569 if (dwc->del_p1p2p3_quirk)
570 reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN;
571
572 if (dwc->del_phy_power_chg_quirk)
573 reg |= DWC3_GUSB3PIPECTL_DEPOCHANGE;
574
575 if (dwc->lfps_filter_quirk)
576 reg |= DWC3_GUSB3PIPECTL_LFPSFILT;
577
578 if (dwc->rx_detect_poll_quirk)
579 reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL;
580
581 if (dwc->tx_de_emphasis_quirk)
582 reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis);
583
584 if (dwc->dis_u3_susphy_quirk)
585 reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
586
587 if (dwc->dis_del_phy_power_chg_quirk)
588 reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
589
590 dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
591
592 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
593
594 /* Select the HS PHY interface */
595 switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
596 case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
597 if (dwc->hsphy_interface &&
598 !strncmp(dwc->hsphy_interface, "utmi", 4)) {
599 reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
600 break;
601 } else if (dwc->hsphy_interface &&
602 !strncmp(dwc->hsphy_interface, "ulpi", 4)) {
603 reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
604 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
605 } else {
606 /* Relying on default value. */
607 if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
608 break;
609 }
610 /* FALLTHROUGH */
611 case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI:
612 /* FALLTHROUGH */
613 default:
614 break;
615 }
616
617 switch (dwc->hsphy_mode) {
618 case USBPHY_INTERFACE_MODE_UTMI:
619 reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
620 DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
621 reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) |
622 DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT);
623 break;
624 case USBPHY_INTERFACE_MODE_UTMIW:
625 reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
626 DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
627 reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) |
628 DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
629 break;
630 default:
631 break;
632 }
633
634 /*
635 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
636 * '0' during coreConsultant configuration. So default value will
637 * be '0' when the core is reset. Application needs to set it to
638 * '1' after the core initialization is completed.
639 */
640 if (dwc->revision > DWC3_REVISION_194A)
641 reg |= DWC3_GUSB2PHYCFG_SUSPHY;
642
643 if (dwc->dis_u2_susphy_quirk)
644 reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
645
646 if (dwc->dis_enblslpm_quirk)
647 reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
648
649 if (dwc->dis_u2_freeclk_exists_quirk)
650 reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
651
652 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
653
654 return 0;
655 }
656
657 static void dwc3_core_exit(struct dwc3 *dwc)
658 {
659 dwc3_event_buffers_cleanup(dwc);
660
661 usb_phy_shutdown(dwc->usb2_phy);
662 usb_phy_shutdown(dwc->usb3_phy);
663 phy_exit(dwc->usb2_generic_phy);
664 phy_exit(dwc->usb3_generic_phy);
665
666 usb_phy_set_suspend(dwc->usb2_phy, 1);
667 usb_phy_set_suspend(dwc->usb3_phy, 1);
668 phy_power_off(dwc->usb2_generic_phy);
669 phy_power_off(dwc->usb3_generic_phy);
670 }
671
672 static bool dwc3_core_is_valid(struct dwc3 *dwc)
673 {
674 u32 reg;
675
676 reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
677
678 /* This should read as U3 followed by revision number */
679 if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) {
680 /* Detected DWC_usb3 IP */
681 dwc->revision = reg;
682 } else if ((reg & DWC3_GSNPSID_MASK) == 0x33310000) {
683 /* Detected DWC_usb31 IP */
684 dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER);
685 dwc->revision |= DWC3_REVISION_IS_DWC31;
686 } else {
687 return false;
688 }
689
690 return true;
691 }
692
693 static void dwc3_core_setup_global_control(struct dwc3 *dwc)
694 {
695 u32 hwparams4 = dwc->hwparams.hwparams4;
696 u32 reg;
697
698 reg = dwc3_readl(dwc->regs, DWC3_GCTL);
699 reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
700
701 switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
702 case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
703 /**
704 * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
705 * issue which would cause xHCI compliance tests to fail.
706 *
707 * Because of that we cannot enable clock gating on such
708 * configurations.
709 *
710 * Refers to:
711 *
712 * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based
713 * SOF/ITP Mode Used
714 */
715 if ((dwc->dr_mode == USB_DR_MODE_HOST ||
716 dwc->dr_mode == USB_DR_MODE_OTG) &&
717 (dwc->revision >= DWC3_REVISION_210A &&
718 dwc->revision <= DWC3_REVISION_250A))
719 reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC;
720 else
721 reg &= ~DWC3_GCTL_DSBLCLKGTNG;
722 break;
723 case DWC3_GHWPARAMS1_EN_PWROPT_HIB:
724 /* enable hibernation here */
725 dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4);
726
727 /*
728 * REVISIT Enabling this bit so that host-mode hibernation
729 * will work. Device-mode hibernation is not yet implemented.
730 */
731 reg |= DWC3_GCTL_GBLHIBERNATIONEN;
732 break;
733 default:
734 /* nothing */
735 break;
736 }
737
738 /* check if current dwc3 is on simulation board */
739 if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
740 dev_info(dwc->dev, "Running with FPGA optmizations\n");
741 dwc->is_fpga = true;
742 }
743
744 WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga,
745 "disable_scramble cannot be used on non-FPGA builds\n");
746
747 if (dwc->disable_scramble_quirk && dwc->is_fpga)
748 reg |= DWC3_GCTL_DISSCRAMBLE;
749 else
750 reg &= ~DWC3_GCTL_DISSCRAMBLE;
751
752 if (dwc->u2exit_lfps_quirk)
753 reg |= DWC3_GCTL_U2EXIT_LFPS;
754
755 /*
756 * WORKAROUND: DWC3 revisions <1.90a have a bug
757 * where the device can fail to connect at SuperSpeed
758 * and falls back to high-speed mode which causes
759 * the device to enter a Connect/Disconnect loop
760 */
761 if (dwc->revision < DWC3_REVISION_190A)
762 reg |= DWC3_GCTL_U2RSTECN;
763
764 dwc3_writel(dwc->regs, DWC3_GCTL, reg);
765 }
766
767 static int dwc3_core_get_phy(struct dwc3 *dwc);
768 static int dwc3_core_ulpi_init(struct dwc3 *dwc);
769
770 /**
771 * dwc3_core_init - Low-level initialization of DWC3 Core
772 * @dwc: Pointer to our controller context structure
773 *
774 * Returns 0 on success otherwise negative errno.
775 */
776 static int dwc3_core_init(struct dwc3 *dwc)
777 {
778 u32 reg;
779 int ret;
780
781 if (!dwc3_core_is_valid(dwc)) {
782 dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
783 ret = -ENODEV;
784 goto err0;
785 }
786
787 /*
788 * Write Linux Version Code to our GUID register so it's easy to figure
789 * out which kernel version a bug was found.
790 */
791 dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
792
793 /* Handle USB2.0-only core configuration */
794 if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
795 DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
796 if (dwc->maximum_speed == USB_SPEED_SUPER)
797 dwc->maximum_speed = USB_SPEED_HIGH;
798 }
799
800 ret = dwc3_phy_setup(dwc);
801 if (ret)
802 goto err0;
803
804 if (!dwc->ulpi_ready) {
805 ret = dwc3_core_ulpi_init(dwc);
806 if (ret)
807 goto err0;
808 dwc->ulpi_ready = true;
809 }
810
811 if (!dwc->phys_ready) {
812 ret = dwc3_core_get_phy(dwc);
813 if (ret)
814 goto err0a;
815 dwc->phys_ready = true;
816 }
817
818 ret = dwc3_core_soft_reset(dwc);
819 if (ret)
820 goto err0a;
821
822 dwc3_core_setup_global_control(dwc);
823 dwc3_core_num_eps(dwc);
824
825 ret = dwc3_setup_scratch_buffers(dwc);
826 if (ret)
827 goto err1;
828
829 /* Adjust Frame Length */
830 dwc3_frame_length_adjustment(dwc);
831
832 usb_phy_set_suspend(dwc->usb2_phy, 0);
833 usb_phy_set_suspend(dwc->usb3_phy, 0);
834 ret = phy_power_on(dwc->usb2_generic_phy);
835 if (ret < 0)
836 goto err2;
837
838 ret = phy_power_on(dwc->usb3_generic_phy);
839 if (ret < 0)
840 goto err3;
841
842 ret = dwc3_event_buffers_setup(dwc);
843 if (ret) {
844 dev_err(dwc->dev, "failed to setup event buffers\n");
845 goto err4;
846 }
847
848 /*
849 * ENDXFER polling is available on version 3.10a and later of
850 * the DWC_usb3 controller. It is NOT available in the
851 * DWC_usb31 controller.
852 */
853 if (!dwc3_is_usb31(dwc) && dwc->revision >= DWC3_REVISION_310A) {
854 reg = dwc3_readl(dwc->regs, DWC3_GUCTL2);
855 reg |= DWC3_GUCTL2_RST_ACTBITLATER;
856 dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
857 }
858
859 if (dwc->revision >= DWC3_REVISION_250A) {
860 reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
861
862 /*
863 * Enable hardware control of sending remote wakeup
864 * in HS when the device is in the L1 state.
865 */
866 if (dwc->revision >= DWC3_REVISION_290A)
867 reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW;
868
869 if (dwc->dis_tx_ipgap_linecheck_quirk)
870 reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
871
872 dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
873 }
874
875 /*
876 * Must config both number of packets and max burst settings to enable
877 * RX and/or TX threshold.
878 */
879 if (dwc3_is_usb31(dwc) && dwc->dr_mode == USB_DR_MODE_HOST) {
880 u8 rx_thr_num = dwc->rx_thr_num_pkt_prd;
881 u8 rx_maxburst = dwc->rx_max_burst_prd;
882 u8 tx_thr_num = dwc->tx_thr_num_pkt_prd;
883 u8 tx_maxburst = dwc->tx_max_burst_prd;
884
885 if (rx_thr_num && rx_maxburst) {
886 reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
887 reg |= DWC31_RXTHRNUMPKTSEL_PRD;
888
889 reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
890 reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
891
892 reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
893 reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
894
895 dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
896 }
897
898 if (tx_thr_num && tx_maxburst) {
899 reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
900 reg |= DWC31_TXTHRNUMPKTSEL_PRD;
901
902 reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
903 reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
904
905 reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
906 reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
907
908 dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
909 }
910 }
911
912 return 0;
913
914 err4:
915 phy_power_off(dwc->usb3_generic_phy);
916
917 err3:
918 phy_power_off(dwc->usb2_generic_phy);
919
920 err2:
921 usb_phy_set_suspend(dwc->usb2_phy, 1);
922 usb_phy_set_suspend(dwc->usb3_phy, 1);
923
924 err1:
925 usb_phy_shutdown(dwc->usb2_phy);
926 usb_phy_shutdown(dwc->usb3_phy);
927 phy_exit(dwc->usb2_generic_phy);
928 phy_exit(dwc->usb3_generic_phy);
929
930 err0a:
931 dwc3_ulpi_exit(dwc);
932
933 err0:
934 return ret;
935 }
936
937 static int dwc3_core_get_phy(struct dwc3 *dwc)
938 {
939 struct device *dev = dwc->dev;
940 struct device_node *node = dev->of_node;
941 int ret;
942
943 if (node) {
944 dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
945 dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
946 } else {
947 dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
948 dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
949 }
950
951 if (IS_ERR(dwc->usb2_phy)) {
952 ret = PTR_ERR(dwc->usb2_phy);
953 if (ret == -ENXIO || ret == -ENODEV) {
954 dwc->usb2_phy = NULL;
955 } else if (ret == -EPROBE_DEFER) {
956 return ret;
957 } else {
958 dev_err(dev, "no usb2 phy configured\n");
959 return ret;
960 }
961 }
962
963 if (IS_ERR(dwc->usb3_phy)) {
964 ret = PTR_ERR(dwc->usb3_phy);
965 if (ret == -ENXIO || ret == -ENODEV) {
966 dwc->usb3_phy = NULL;
967 } else if (ret == -EPROBE_DEFER) {
968 return ret;
969 } else {
970 dev_err(dev, "no usb3 phy configured\n");
971 return ret;
972 }
973 }
974
975 dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
976 if (IS_ERR(dwc->usb2_generic_phy)) {
977 ret = PTR_ERR(dwc->usb2_generic_phy);
978 if (ret == -ENOSYS || ret == -ENODEV) {
979 dwc->usb2_generic_phy = NULL;
980 } else if (ret == -EPROBE_DEFER) {
981 return ret;
982 } else {
983 dev_err(dev, "no usb2 phy configured\n");
984 return ret;
985 }
986 }
987
988 dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
989 if (IS_ERR(dwc->usb3_generic_phy)) {
990 ret = PTR_ERR(dwc->usb3_generic_phy);
991 if (ret == -ENOSYS || ret == -ENODEV) {
992 dwc->usb3_generic_phy = NULL;
993 } else if (ret == -EPROBE_DEFER) {
994 return ret;
995 } else {
996 dev_err(dev, "no usb3 phy configured\n");
997 return ret;
998 }
999 }
1000
1001 return 0;
1002 }
1003
1004 static int dwc3_core_init_mode(struct dwc3 *dwc)
1005 {
1006 struct device *dev = dwc->dev;
1007 int ret;
1008
1009 switch (dwc->dr_mode) {
1010 case USB_DR_MODE_PERIPHERAL:
1011 dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
1012
1013 if (dwc->usb2_phy)
1014 otg_set_vbus(dwc->usb2_phy->otg, false);
1015 phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
1016 phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
1017
1018 ret = dwc3_gadget_init(dwc);
1019 if (ret) {
1020 if (ret != -EPROBE_DEFER)
1021 dev_err(dev, "failed to initialize gadget\n");
1022 return ret;
1023 }
1024 break;
1025 case USB_DR_MODE_HOST:
1026 dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
1027
1028 if (dwc->usb2_phy)
1029 otg_set_vbus(dwc->usb2_phy->otg, true);
1030 phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
1031 phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
1032
1033 ret = dwc3_host_init(dwc);
1034 if (ret) {
1035 if (ret != -EPROBE_DEFER)
1036 dev_err(dev, "failed to initialize host\n");
1037 return ret;
1038 }
1039 phy_calibrate(dwc->usb2_generic_phy);
1040 break;
1041 case USB_DR_MODE_OTG:
1042 INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
1043 ret = dwc3_drd_init(dwc);
1044 if (ret) {
1045 if (ret != -EPROBE_DEFER)
1046 dev_err(dev, "failed to initialize dual-role\n");
1047 return ret;
1048 }
1049 break;
1050 default:
1051 dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode);
1052 return -EINVAL;
1053 }
1054
1055 return 0;
1056 }
1057
1058 static void dwc3_core_exit_mode(struct dwc3 *dwc)
1059 {
1060 switch (dwc->dr_mode) {
1061 case USB_DR_MODE_PERIPHERAL:
1062 dwc3_gadget_exit(dwc);
1063 break;
1064 case USB_DR_MODE_HOST:
1065 dwc3_host_exit(dwc);
1066 break;
1067 case USB_DR_MODE_OTG:
1068 dwc3_drd_exit(dwc);
1069 break;
1070 default:
1071 /* do nothing */
1072 break;
1073 }
1074 }
1075
1076 static void dwc3_get_properties(struct dwc3 *dwc)
1077 {
1078 struct device *dev = dwc->dev;
1079 u8 lpm_nyet_threshold;
1080 u8 tx_de_emphasis;
1081 u8 hird_threshold;
1082 u8 rx_thr_num_pkt_prd;
1083 u8 rx_max_burst_prd;
1084 u8 tx_thr_num_pkt_prd;
1085 u8 tx_max_burst_prd;
1086
1087 /* default to highest possible threshold */
1088 lpm_nyet_threshold = 0xff;
1089
1090 /* default to -3.5dB de-emphasis */
1091 tx_de_emphasis = 1;
1092
1093 /*
1094 * default to assert utmi_sleep_n and use maximum allowed HIRD
1095 * threshold value of 0b1100
1096 */
1097 hird_threshold = 12;
1098
1099 dwc->maximum_speed = usb_get_maximum_speed(dev);
1100 dwc->dr_mode = usb_get_dr_mode(dev);
1101 dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
1102
1103 dwc->sysdev_is_parent = device_property_read_bool(dev,
1104 "linux,sysdev_is_parent");
1105 if (dwc->sysdev_is_parent)
1106 dwc->sysdev = dwc->dev->parent;
1107 else
1108 dwc->sysdev = dwc->dev;
1109
1110 dwc->has_lpm_erratum = device_property_read_bool(dev,
1111 "snps,has-lpm-erratum");
1112 device_property_read_u8(dev, "snps,lpm-nyet-threshold",
1113 &lpm_nyet_threshold);
1114 dwc->is_utmi_l1_suspend = device_property_read_bool(dev,
1115 "snps,is-utmi-l1-suspend");
1116 device_property_read_u8(dev, "snps,hird-threshold",
1117 &hird_threshold);
1118 dwc->usb3_lpm_capable = device_property_read_bool(dev,
1119 "snps,usb3_lpm_capable");
1120 device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
1121 &rx_thr_num_pkt_prd);
1122 device_property_read_u8(dev, "snps,rx-max-burst-prd",
1123 &rx_max_burst_prd);
1124 device_property_read_u8(dev, "snps,tx-thr-num-pkt-prd",
1125 &tx_thr_num_pkt_prd);
1126 device_property_read_u8(dev, "snps,tx-max-burst-prd",
1127 &tx_max_burst_prd);
1128
1129 dwc->disable_scramble_quirk = device_property_read_bool(dev,
1130 "snps,disable_scramble_quirk");
1131 dwc->u2exit_lfps_quirk = device_property_read_bool(dev,
1132 "snps,u2exit_lfps_quirk");
1133 dwc->u2ss_inp3_quirk = device_property_read_bool(dev,
1134 "snps,u2ss_inp3_quirk");
1135 dwc->req_p1p2p3_quirk = device_property_read_bool(dev,
1136 "snps,req_p1p2p3_quirk");
1137 dwc->del_p1p2p3_quirk = device_property_read_bool(dev,
1138 "snps,del_p1p2p3_quirk");
1139 dwc->del_phy_power_chg_quirk = device_property_read_bool(dev,
1140 "snps,del_phy_power_chg_quirk");
1141 dwc->lfps_filter_quirk = device_property_read_bool(dev,
1142 "snps,lfps_filter_quirk");
1143 dwc->rx_detect_poll_quirk = device_property_read_bool(dev,
1144 "snps,rx_detect_poll_quirk");
1145 dwc->dis_u3_susphy_quirk = device_property_read_bool(dev,
1146 "snps,dis_u3_susphy_quirk");
1147 dwc->dis_u2_susphy_quirk = device_property_read_bool(dev,
1148 "snps,dis_u2_susphy_quirk");
1149 dwc->dis_enblslpm_quirk = device_property_read_bool(dev,
1150 "snps,dis_enblslpm_quirk");
1151 dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev,
1152 "snps,dis_rxdet_inp3_quirk");
1153 dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
1154 "snps,dis-u2-freeclk-exists-quirk");
1155 dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
1156 "snps,dis-del-phy-power-chg-quirk");
1157 dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
1158 "snps,dis-tx-ipgap-linecheck-quirk");
1159
1160 dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
1161 "snps,tx_de_emphasis_quirk");
1162 device_property_read_u8(dev, "snps,tx_de_emphasis",
1163 &tx_de_emphasis);
1164 device_property_read_string(dev, "snps,hsphy_interface",
1165 &dwc->hsphy_interface);
1166 device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
1167 &dwc->fladj);
1168
1169 dwc->dis_metastability_quirk = device_property_read_bool(dev,
1170 "snps,dis_metastability_quirk");
1171
1172 dwc->lpm_nyet_threshold = lpm_nyet_threshold;
1173 dwc->tx_de_emphasis = tx_de_emphasis;
1174
1175 dwc->hird_threshold = hird_threshold
1176 | (dwc->is_utmi_l1_suspend << 4);
1177
1178 dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
1179 dwc->rx_max_burst_prd = rx_max_burst_prd;
1180
1181 dwc->tx_thr_num_pkt_prd = tx_thr_num_pkt_prd;
1182 dwc->tx_max_burst_prd = tx_max_burst_prd;
1183
1184 dwc->imod_interval = 0;
1185 }
1186
1187 /* check whether the core supports IMOD */
1188 bool dwc3_has_imod(struct dwc3 *dwc)
1189 {
1190 return ((dwc3_is_usb3(dwc) &&
1191 dwc->revision >= DWC3_REVISION_300A) ||
1192 (dwc3_is_usb31(dwc) &&
1193 dwc->revision >= DWC3_USB31_REVISION_120A));
1194 }
1195
1196 static void dwc3_check_params(struct dwc3 *dwc)
1197 {
1198 struct device *dev = dwc->dev;
1199
1200 /* Check for proper value of imod_interval */
1201 if (dwc->imod_interval && !dwc3_has_imod(dwc)) {
1202 dev_warn(dwc->dev, "Interrupt moderation not supported\n");
1203 dwc->imod_interval = 0;
1204 }
1205
1206 /*
1207 * Workaround for STAR 9000961433 which affects only version
1208 * 3.00a of the DWC_usb3 core. This prevents the controller
1209 * interrupt from being masked while handling events. IMOD
1210 * allows us to work around this issue. Enable it for the
1211 * affected version.
1212 */
1213 if (!dwc->imod_interval &&
1214 (dwc->revision == DWC3_REVISION_300A))
1215 dwc->imod_interval = 1;
1216
1217 /* Check the maximum_speed parameter */
1218 switch (dwc->maximum_speed) {
1219 case USB_SPEED_LOW:
1220 case USB_SPEED_FULL:
1221 case USB_SPEED_HIGH:
1222 case USB_SPEED_SUPER:
1223 case USB_SPEED_SUPER_PLUS:
1224 break;
1225 default:
1226 dev_err(dev, "invalid maximum_speed parameter %d\n",
1227 dwc->maximum_speed);
1228 /* fall through */
1229 case USB_SPEED_UNKNOWN:
1230 /* default to superspeed */
1231 dwc->maximum_speed = USB_SPEED_SUPER;
1232
1233 /*
1234 * default to superspeed plus if we are capable.
1235 */
1236 if (dwc3_is_usb31(dwc) &&
1237 (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
1238 DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
1239 dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
1240
1241 break;
1242 }
1243 }
1244
1245 static int dwc3_probe(struct platform_device *pdev)
1246 {
1247 struct device *dev = &pdev->dev;
1248 struct resource *res;
1249 struct dwc3 *dwc;
1250
1251 int ret;
1252
1253 void __iomem *regs;
1254
1255 dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
1256 if (!dwc)
1257 return -ENOMEM;
1258
1259 dwc->dev = dev;
1260
1261 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1262 if (!res) {
1263 dev_err(dev, "missing memory resource\n");
1264 return -ENODEV;
1265 }
1266
1267 dwc->xhci_resources[0].start = res->start;
1268 dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
1269 DWC3_XHCI_REGS_END;
1270 dwc->xhci_resources[0].flags = res->flags;
1271 dwc->xhci_resources[0].name = res->name;
1272
1273 res->start += DWC3_GLOBALS_REGS_START;
1274
1275 /*
1276 * Request memory region but exclude xHCI regs,
1277 * since it will be requested by the xhci-plat driver.
1278 */
1279 regs = devm_ioremap_resource(dev, res);
1280 if (IS_ERR(regs)) {
1281 ret = PTR_ERR(regs);
1282 goto err0;
1283 }
1284
1285 dwc->regs = regs;
1286 dwc->regs_size = resource_size(res);
1287
1288 dwc3_get_properties(dwc);
1289
1290 platform_set_drvdata(pdev, dwc);
1291 dwc3_cache_hwparams(dwc);
1292
1293 spin_lock_init(&dwc->lock);
1294
1295 pm_runtime_set_active(dev);
1296 pm_runtime_use_autosuspend(dev);
1297 pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY);
1298 pm_runtime_enable(dev);
1299 ret = pm_runtime_get_sync(dev);
1300 if (ret < 0)
1301 goto err1;
1302
1303 pm_runtime_forbid(dev);
1304
1305 ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
1306 if (ret) {
1307 dev_err(dwc->dev, "failed to allocate event buffers\n");
1308 ret = -ENOMEM;
1309 goto err2;
1310 }
1311
1312 ret = dwc3_get_dr_mode(dwc);
1313 if (ret)
1314 goto err3;
1315
1316 ret = dwc3_alloc_scratch_buffers(dwc);
1317 if (ret)
1318 goto err3;
1319
1320 ret = dwc3_core_init(dwc);
1321 if (ret) {
1322 dev_err(dev, "failed to initialize core\n");
1323 goto err4;
1324 }
1325
1326 dwc3_check_params(dwc);
1327
1328 ret = dwc3_core_init_mode(dwc);
1329 if (ret)
1330 goto err5;
1331
1332 dwc3_debugfs_init(dwc);
1333 pm_runtime_put(dev);
1334
1335 return 0;
1336
1337 err5:
1338 dwc3_event_buffers_cleanup(dwc);
1339
1340 err4:
1341 dwc3_free_scratch_buffers(dwc);
1342
1343 err3:
1344 dwc3_free_event_buffers(dwc);
1345
1346 err2:
1347 pm_runtime_allow(&pdev->dev);
1348
1349 err1:
1350 pm_runtime_put_sync(&pdev->dev);
1351 pm_runtime_disable(&pdev->dev);
1352
1353 err0:
1354 /*
1355 * restore res->start back to its original value so that, in case the
1356 * probe is deferred, we don't end up getting error in request the
1357 * memory region the next time probe is called.
1358 */
1359 res->start -= DWC3_GLOBALS_REGS_START;
1360
1361 return ret;
1362 }
1363
1364 static int dwc3_remove(struct platform_device *pdev)
1365 {
1366 struct dwc3 *dwc = platform_get_drvdata(pdev);
1367 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1368
1369 pm_runtime_get_sync(&pdev->dev);
1370 /*
1371 * restore res->start back to its original value so that, in case the
1372 * probe is deferred, we don't end up getting error in request the
1373 * memory region the next time probe is called.
1374 */
1375 res->start -= DWC3_GLOBALS_REGS_START;
1376
1377 dwc3_debugfs_exit(dwc);
1378 dwc3_core_exit_mode(dwc);
1379
1380 dwc3_core_exit(dwc);
1381 dwc3_ulpi_exit(dwc);
1382
1383 pm_runtime_put_sync(&pdev->dev);
1384 pm_runtime_allow(&pdev->dev);
1385 pm_runtime_disable(&pdev->dev);
1386
1387 dwc3_free_event_buffers(dwc);
1388 dwc3_free_scratch_buffers(dwc);
1389
1390 return 0;
1391 }
1392
1393 #ifdef CONFIG_PM
1394 static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
1395 {
1396 unsigned long flags;
1397
1398 switch (dwc->current_dr_role) {
1399 case DWC3_GCTL_PRTCAP_DEVICE:
1400 spin_lock_irqsave(&dwc->lock, flags);
1401 dwc3_gadget_suspend(dwc);
1402 spin_unlock_irqrestore(&dwc->lock, flags);
1403 dwc3_core_exit(dwc);
1404 break;
1405 case DWC3_GCTL_PRTCAP_HOST:
1406 /* do nothing during host runtime_suspend */
1407 if (!PMSG_IS_AUTO(msg))
1408 dwc3_core_exit(dwc);
1409 break;
1410 case DWC3_GCTL_PRTCAP_OTG:
1411 /* do nothing during runtime_suspend */
1412 if (PMSG_IS_AUTO(msg))
1413 break;
1414
1415 if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
1416 spin_lock_irqsave(&dwc->lock, flags);
1417 dwc3_gadget_suspend(dwc);
1418 spin_unlock_irqrestore(&dwc->lock, flags);
1419 }
1420
1421 dwc3_otg_exit(dwc);
1422 dwc3_core_exit(dwc);
1423 break;
1424 default:
1425 /* do nothing */
1426 break;
1427 }
1428
1429 return 0;
1430 }
1431
1432 static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
1433 {
1434 unsigned long flags;
1435 int ret;
1436
1437 switch (dwc->current_dr_role) {
1438 case DWC3_GCTL_PRTCAP_DEVICE:
1439 ret = dwc3_core_init(dwc);
1440 if (ret)
1441 return ret;
1442
1443 dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
1444 spin_lock_irqsave(&dwc->lock, flags);
1445 dwc3_gadget_resume(dwc);
1446 spin_unlock_irqrestore(&dwc->lock, flags);
1447 break;
1448 case DWC3_GCTL_PRTCAP_HOST:
1449 /* nothing to do on host runtime_resume */
1450 if (!PMSG_IS_AUTO(msg)) {
1451 ret = dwc3_core_init(dwc);
1452 if (ret)
1453 return ret;
1454 dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
1455 }
1456 break;
1457 case DWC3_GCTL_PRTCAP_OTG:
1458 /* nothing to do on runtime_resume */
1459 if (PMSG_IS_AUTO(msg))
1460 break;
1461
1462 ret = dwc3_core_init(dwc);
1463 if (ret)
1464 return ret;
1465
1466 dwc3_set_prtcap(dwc, dwc->current_dr_role);
1467
1468 dwc3_otg_init(dwc);
1469 if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST) {
1470 dwc3_otg_host_init(dwc);
1471 } else if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
1472 spin_lock_irqsave(&dwc->lock, flags);
1473 dwc3_gadget_resume(dwc);
1474 spin_unlock_irqrestore(&dwc->lock, flags);
1475 }
1476
1477 break;
1478 default:
1479 /* do nothing */
1480 break;
1481 }
1482
1483 return 0;
1484 }
1485
1486 static int dwc3_runtime_checks(struct dwc3 *dwc)
1487 {
1488 switch (dwc->current_dr_role) {
1489 case DWC3_GCTL_PRTCAP_DEVICE:
1490 if (dwc->connected)
1491 return -EBUSY;
1492 break;
1493 case DWC3_GCTL_PRTCAP_HOST:
1494 default:
1495 /* do nothing */
1496 break;
1497 }
1498
1499 return 0;
1500 }
1501
1502 static int dwc3_runtime_suspend(struct device *dev)
1503 {
1504 struct dwc3 *dwc = dev_get_drvdata(dev);
1505 int ret;
1506
1507 if (dwc3_runtime_checks(dwc))
1508 return -EBUSY;
1509
1510 ret = dwc3_suspend_common(dwc, PMSG_AUTO_SUSPEND);
1511 if (ret)
1512 return ret;
1513
1514 device_init_wakeup(dev, true);
1515
1516 return 0;
1517 }
1518
1519 static int dwc3_runtime_resume(struct device *dev)
1520 {
1521 struct dwc3 *dwc = dev_get_drvdata(dev);
1522 int ret;
1523
1524 device_init_wakeup(dev, false);
1525
1526 ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME);
1527 if (ret)
1528 return ret;
1529
1530 switch (dwc->current_dr_role) {
1531 case DWC3_GCTL_PRTCAP_DEVICE:
1532 dwc3_gadget_process_pending_events(dwc);
1533 break;
1534 case DWC3_GCTL_PRTCAP_HOST:
1535 default:
1536 /* do nothing */
1537 break;
1538 }
1539
1540 pm_runtime_mark_last_busy(dev);
1541
1542 return 0;
1543 }
1544
1545 static int dwc3_runtime_idle(struct device *dev)
1546 {
1547 struct dwc3 *dwc = dev_get_drvdata(dev);
1548
1549 switch (dwc->current_dr_role) {
1550 case DWC3_GCTL_PRTCAP_DEVICE:
1551 if (dwc3_runtime_checks(dwc))
1552 return -EBUSY;
1553 break;
1554 case DWC3_GCTL_PRTCAP_HOST:
1555 default:
1556 /* do nothing */
1557 break;
1558 }
1559
1560 pm_runtime_mark_last_busy(dev);
1561 pm_runtime_autosuspend(dev);
1562
1563 return 0;
1564 }
1565 #endif /* CONFIG_PM */
1566
1567 #ifdef CONFIG_PM_SLEEP
1568 static int dwc3_suspend(struct device *dev)
1569 {
1570 struct dwc3 *dwc = dev_get_drvdata(dev);
1571 int ret;
1572
1573 ret = dwc3_suspend_common(dwc, PMSG_SUSPEND);
1574 if (ret)
1575 return ret;
1576
1577 pinctrl_pm_select_sleep_state(dev);
1578
1579 return 0;
1580 }
1581
1582 static int dwc3_resume(struct device *dev)
1583 {
1584 struct dwc3 *dwc = dev_get_drvdata(dev);
1585 int ret;
1586
1587 pinctrl_pm_select_default_state(dev);
1588
1589 ret = dwc3_resume_common(dwc, PMSG_RESUME);
1590 if (ret)
1591 return ret;
1592
1593 pm_runtime_disable(dev);
1594 pm_runtime_set_active(dev);
1595 pm_runtime_enable(dev);
1596
1597 return 0;
1598 }
1599 #endif /* CONFIG_PM_SLEEP */
1600
1601 static const struct dev_pm_ops dwc3_dev_pm_ops = {
1602 SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
1603 SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
1604 dwc3_runtime_idle)
1605 };
1606
1607 #ifdef CONFIG_OF
1608 static const struct of_device_id of_dwc3_match[] = {
1609 {
1610 .compatible = "snps,dwc3"
1611 },
1612 {
1613 .compatible = "synopsys,dwc3"
1614 },
1615 { },
1616 };
1617 MODULE_DEVICE_TABLE(of, of_dwc3_match);
1618 #endif
1619
1620 #ifdef CONFIG_ACPI
1621
1622 #define ACPI_ID_INTEL_BSW "808622B7"
1623
1624 static const struct acpi_device_id dwc3_acpi_match[] = {
1625 { ACPI_ID_INTEL_BSW, 0 },
1626 { },
1627 };
1628 MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
1629 #endif
1630
1631 static struct platform_driver dwc3_driver = {
1632 .probe = dwc3_probe,
1633 .remove = dwc3_remove,
1634 .driver = {
1635 .name = "dwc3",
1636 .of_match_table = of_match_ptr(of_dwc3_match),
1637 .acpi_match_table = ACPI_PTR(dwc3_acpi_match),
1638 .pm = &dwc3_dev_pm_ops,
1639 },
1640 };
1641
1642 module_platform_driver(dwc3_driver);
1643
1644 MODULE_ALIAS("platform:dwc3");
1645 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
1646 MODULE_LICENSE("GPL v2");
1647 MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
Linux with added FPC-III support