?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ext3: Update MAINTAINERS for ext3 and JBD
[linux/fpc-iii.git] / drivers / media / video / em28xx / em28xx-cards.c
blob7e3c78239fa9bbd92839e82082eefb611d7f28d8
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/delay.h>
28 #include <linux/i2c.h>
29 #include <linux/usb.h>
30 #include <media/tuner.h>
31 #include <media/msp3400.h>
32 #include <media/saa7115.h>
33 #include <media/tvp5150.h>
34 #include <media/tvaudio.h>
35 #include <media/i2c-addr.h>
36 #include <media/tveeprom.h>
37 #include <media/v4l2-common.h>
38 #include <media/v4l2-chip-ident.h>
39
40 #include "em28xx.h"
41
42 #define DRIVER_NAME "em28xx"
43
44 static int tuner = -1;
45 module_param(tuner, int, 0444);
46 MODULE_PARM_DESC(tuner, "tuner type");
47
48 static unsigned int disable_ir;
49 module_param(disable_ir, int, 0444);
50 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
51
52 static unsigned int disable_usb_speed_check;
53 module_param(disable_usb_speed_check, int, 0444);
54 MODULE_PARM_DESC(disable_usb_speed_check,
55 "override min bandwidth requirement of 480M bps");
56
57 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
58 module_param_array(card, int, NULL, 0444);
59 MODULE_PARM_DESC(card, "card type");
60
61 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
62 static unsigned long em28xx_devused;
63
64 struct em28xx_hash_table {
65 unsigned long hash;
66 unsigned int model;
67 unsigned int tuner;
68 };
69
70 /*
71 * Reset sequences for analog/digital modes
72 */
73
74 /* Reset for the most [analog] boards */
75 static struct em28xx_reg_seq default_analog[] = {
76 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
77 { -1, -1, -1, -1},
78 };
79
80 /* Reset for the most [digital] boards */
81 static struct em28xx_reg_seq default_digital[] = {
82 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
83 { -1, -1, -1, -1},
84 };
85
86 /* Board Hauppauge WinTV HVR 900 analog */
87 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
88 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
89 {0x05, 0xff, 0x10, 10},
90 { -1, -1, -1, -1},
91 };
92
93 /* Board Hauppauge WinTV HVR 900 digital */
94 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
95 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
96 {EM2880_R04_GPO, 0x04, 0x0f, 10},
97 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
98 { -1, -1, -1, -1},
99 };
100
101 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
102 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
103 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
104 { -1, -1, -1, -1},
105 };
106
107 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
108
109 /* Board - EM2870 Kworld 355u
110 Analog - No input analog */
111
112 /* Board - EM2882 Kworld 315U digital */
113 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
114 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
115 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
116 {EM2880_R04_GPO, 0x04, 0xff, 10},
117 {EM2880_R04_GPO, 0x0c, 0xff, 10},
118 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
119 { -1, -1, -1, -1},
120 };
121
122 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
123 {EM2880_R04_GPO, 0x08, 0xff, 10},
124 {EM2880_R04_GPO, 0x0c, 0xff, 10},
125 {EM2880_R04_GPO, 0x08, 0xff, 10},
126 {EM2880_R04_GPO, 0x0c, 0xff, 10},
127 { -1, -1, -1, -1},
128 };
129
130 static struct em28xx_reg_seq kworld_330u_analog[] = {
131 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
132 {EM2880_R04_GPO, 0x00, 0xff, 10},
133 { -1, -1, -1, -1},
134 };
135
136 static struct em28xx_reg_seq kworld_330u_digital[] = {
137 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
138 {EM2880_R04_GPO, 0x08, 0xff, 10},
139 { -1, -1, -1, -1},
140 };
141
142 /* Evga inDtube
143 GPIO0 - Enable digital power (s5h1409) - low to enable
144 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
145 GPIO4 - xc3028 reset
146 GOP3 - s5h1409 reset
147 */
148 static struct em28xx_reg_seq evga_indtube_analog[] = {
149 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
150 { -1, -1, -1, -1},
151 };
152
153 static struct em28xx_reg_seq evga_indtube_digital[] = {
154 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
155 {EM2880_R04_GPO, 0x04, 0xff, 10},
156 {EM2880_R04_GPO, 0x0c, 0xff, 1},
157 { -1, -1, -1, -1},
158 };
159
160 /* Pinnacle Hybrid Pro eb1a:2881 */
161 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
162 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
163 { -1, -1, -1, -1},
164 };
165
166 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
167 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
168 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
169 {EM2880_R04_GPO, 0x0c, 0xff, 1},
170 { -1, -1, -1, -1},
171 };
172
173
174 /* Callback for the most boards */
175 static struct em28xx_reg_seq default_tuner_gpio[] = {
176 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
177 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
178 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
179 { -1, -1, -1, -1},
180 };
181
182 /* Mute/unmute */
183 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
184 {EM28XX_R08_GPIO, 5, 7, 10},
185 { -1, -1, -1, -1},
186 };
187
188 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
189 {EM28XX_R08_GPIO, 4, 7, 10},
190 { -1, -1, -1, -1},
191 };
192
193 static struct em28xx_reg_seq compro_mute_gpio[] = {
194 {EM28XX_R08_GPIO, 6, 7, 10},
195 { -1, -1, -1, -1},
196 };
197
198 /* Terratec AV350 */
199 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
200 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
201 { -1, -1, -1, -1},
202 };
203
204 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
205 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
206 { -1, -1, -1, -1},
207 };
208
209 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
210 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
211 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
212 { -1, -1, -1, -1},
213 };
214
215 /*
216 * Board definitions
217 */
218 struct em28xx_board em28xx_boards[] = {
219 [EM2750_BOARD_UNKNOWN] = {
220 .name = "EM2710/EM2750/EM2751 webcam grabber",
221 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
222 .tuner_type = TUNER_ABSENT,
223 .is_webcam = 1,
224 .input = { {
225 .type = EM28XX_VMUX_COMPOSITE1,
226 .vmux = 0,
227 .amux = EM28XX_AMUX_VIDEO,
228 .gpio = silvercrest_reg_seq,
229 } },
230 },
231 [EM2800_BOARD_UNKNOWN] = {
232 .name = "Unknown EM2800 video grabber",
233 .is_em2800 = 1,
234 .tda9887_conf = TDA9887_PRESENT,
235 .decoder = EM28XX_SAA711X,
236 .tuner_type = TUNER_ABSENT,
237 .input = { {
238 .type = EM28XX_VMUX_COMPOSITE1,
239 .vmux = SAA7115_COMPOSITE0,
240 .amux = EM28XX_AMUX_LINE_IN,
241 }, {
242 .type = EM28XX_VMUX_SVIDEO,
243 .vmux = SAA7115_SVIDEO3,
244 .amux = EM28XX_AMUX_LINE_IN,
245 } },
246 },
247 [EM2820_BOARD_UNKNOWN] = {
248 .name = "Unknown EM2750/28xx video grabber",
249 .tuner_type = TUNER_ABSENT,
250 .is_webcam = 1, /* To enable sensor probe */
251 },
252 [EM2750_BOARD_DLCW_130] = {
253 /* Beijing Huaqi Information Digital Technology Co., Ltd */
254 .name = "Huaqi DLCW-130",
255 .valid = EM28XX_BOARD_NOT_VALIDATED,
256 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
257 .tuner_type = TUNER_ABSENT,
258 .is_webcam = 1,
259 .input = { {
260 .type = EM28XX_VMUX_COMPOSITE1,
261 .vmux = 0,
262 .amux = EM28XX_AMUX_VIDEO,
263 } },
264 },
265 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
266 .name = "Kworld PVR TV 2800 RF",
267 .tuner_type = TUNER_TEMIC_PAL,
268 .tda9887_conf = TDA9887_PRESENT,
269 .decoder = EM28XX_SAA711X,
270 .input = { {
271 .type = EM28XX_VMUX_COMPOSITE1,
272 .vmux = SAA7115_COMPOSITE0,
273 .amux = EM28XX_AMUX_LINE_IN,
274 }, {
275 .type = EM28XX_VMUX_SVIDEO,
276 .vmux = SAA7115_SVIDEO3,
277 .amux = EM28XX_AMUX_LINE_IN,
278 } },
279 },
280 [EM2820_BOARD_GADMEI_TVR200] = {
281 .name = "Gadmei TVR200",
282 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
283 .tda9887_conf = TDA9887_PRESENT,
284 .decoder = EM28XX_SAA711X,
285 .input = { {
286 .type = EM28XX_VMUX_TELEVISION,
287 .vmux = SAA7115_COMPOSITE2,
288 .amux = EM28XX_AMUX_LINE_IN,
289 }, {
290 .type = EM28XX_VMUX_COMPOSITE1,
291 .vmux = SAA7115_COMPOSITE0,
292 .amux = EM28XX_AMUX_LINE_IN,
293 }, {
294 .type = EM28XX_VMUX_SVIDEO,
295 .vmux = SAA7115_SVIDEO3,
296 .amux = EM28XX_AMUX_LINE_IN,
297 } },
298 },
299 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
300 .name = "Terratec Cinergy 250 USB",
301 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
302 .has_ir_i2c = 1,
303 .tda9887_conf = TDA9887_PRESENT,
304 .decoder = EM28XX_SAA711X,
305 .input = { {
306 .type = EM28XX_VMUX_TELEVISION,
307 .vmux = SAA7115_COMPOSITE2,
308 .amux = EM28XX_AMUX_LINE_IN,
309 }, {
310 .type = EM28XX_VMUX_COMPOSITE1,
311 .vmux = SAA7115_COMPOSITE0,
312 .amux = EM28XX_AMUX_LINE_IN,
313 }, {
314 .type = EM28XX_VMUX_SVIDEO,
315 .vmux = SAA7115_SVIDEO3,
316 .amux = EM28XX_AMUX_LINE_IN,
317 } },
318 },
319 [EM2820_BOARD_PINNACLE_USB_2] = {
320 .name = "Pinnacle PCTV USB 2",
321 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
322 .has_ir_i2c = 1,
323 .tda9887_conf = TDA9887_PRESENT,
324 .decoder = EM28XX_SAA711X,
325 .input = { {
326 .type = EM28XX_VMUX_TELEVISION,
327 .vmux = SAA7115_COMPOSITE2,
328 .amux = EM28XX_AMUX_VIDEO,
329 }, {
330 .type = EM28XX_VMUX_COMPOSITE1,
331 .vmux = SAA7115_COMPOSITE0,
332 .amux = EM28XX_AMUX_LINE_IN,
333 }, {
334 .type = EM28XX_VMUX_SVIDEO,
335 .vmux = SAA7115_SVIDEO3,
336 .amux = EM28XX_AMUX_LINE_IN,
337 } },
338 },
339 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
340 .name = "Hauppauge WinTV USB 2",
341 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
342 .tda9887_conf = TDA9887_PRESENT |
343 TDA9887_PORT1_ACTIVE |
344 TDA9887_PORT2_ACTIVE,
345 .decoder = EM28XX_TVP5150,
346 .has_msp34xx = 1,
347 .has_ir_i2c = 1,
348 .input = { {
349 .type = EM28XX_VMUX_TELEVISION,
350 .vmux = TVP5150_COMPOSITE0,
351 .amux = MSP_INPUT_DEFAULT,
352 }, {
353 .type = EM28XX_VMUX_SVIDEO,
354 .vmux = TVP5150_SVIDEO,
355 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
356 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
357 } },
358 },
359 [EM2820_BOARD_DLINK_USB_TV] = {
360 .name = "D-Link DUB-T210 TV Tuner",
361 .valid = EM28XX_BOARD_NOT_VALIDATED,
362 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
363 .tda9887_conf = TDA9887_PRESENT,
364 .decoder = EM28XX_SAA711X,
365 .input = { {
366 .type = EM28XX_VMUX_TELEVISION,
367 .vmux = SAA7115_COMPOSITE2,
368 .amux = EM28XX_AMUX_LINE_IN,
369 }, {
370 .type = EM28XX_VMUX_COMPOSITE1,
371 .vmux = SAA7115_COMPOSITE0,
372 .amux = EM28XX_AMUX_LINE_IN,
373 }, {
374 .type = EM28XX_VMUX_SVIDEO,
375 .vmux = SAA7115_SVIDEO3,
376 .amux = EM28XX_AMUX_LINE_IN,
377 } },
378 },
379 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
380 .name = "Hercules Smart TV USB 2.0",
381 .valid = EM28XX_BOARD_NOT_VALIDATED,
382 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
383 .tda9887_conf = TDA9887_PRESENT,
384 .decoder = EM28XX_SAA711X,
385 .input = { {
386 .type = EM28XX_VMUX_TELEVISION,
387 .vmux = SAA7115_COMPOSITE2,
388 .amux = EM28XX_AMUX_LINE_IN,
389 }, {
390 .type = EM28XX_VMUX_COMPOSITE1,
391 .vmux = SAA7115_COMPOSITE0,
392 .amux = EM28XX_AMUX_LINE_IN,
393 }, {
394 .type = EM28XX_VMUX_SVIDEO,
395 .vmux = SAA7115_SVIDEO3,
396 .amux = EM28XX_AMUX_LINE_IN,
397 } },
398 },
399 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
400 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
401 .valid = EM28XX_BOARD_NOT_VALIDATED,
402 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
403 .tda9887_conf = TDA9887_PRESENT,
404 .decoder = EM28XX_SAA711X,
405 .input = { {
406 .type = EM28XX_VMUX_TELEVISION,
407 .vmux = SAA7115_COMPOSITE2,
408 .amux = EM28XX_AMUX_VIDEO,
409 }, {
410 .type = EM28XX_VMUX_COMPOSITE1,
411 .vmux = SAA7115_COMPOSITE0,
412 .amux = EM28XX_AMUX_LINE_IN,
413 }, {
414 .type = EM28XX_VMUX_SVIDEO,
415 .vmux = SAA7115_SVIDEO3,
416 .amux = EM28XX_AMUX_LINE_IN,
417 } },
418 },
419 [EM2820_BOARD_GADMEI_UTV310] = {
420 .name = "Gadmei UTV310",
421 .valid = EM28XX_BOARD_NOT_VALIDATED,
422 .tuner_type = TUNER_TNF_5335MF,
423 .tda9887_conf = TDA9887_PRESENT,
424 .decoder = EM28XX_SAA711X,
425 .input = { {
426 .type = EM28XX_VMUX_TELEVISION,
427 .vmux = SAA7115_COMPOSITE1,
428 .amux = EM28XX_AMUX_LINE_IN,
429 }, {
430 .type = EM28XX_VMUX_COMPOSITE1,
431 .vmux = SAA7115_COMPOSITE0,
432 .amux = EM28XX_AMUX_LINE_IN,
433 }, {
434 .type = EM28XX_VMUX_SVIDEO,
435 .vmux = SAA7115_SVIDEO3,
436 .amux = EM28XX_AMUX_LINE_IN,
437 } },
438 },
439 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
440 .name = "Leadtek Winfast USB II Deluxe",
441 .valid = EM28XX_BOARD_NOT_VALIDATED,
442 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
443 .tda9887_conf = TDA9887_PRESENT,
444 .decoder = EM28XX_SAA711X,
445 .input = { {
446 .type = EM28XX_VMUX_TELEVISION,
447 .vmux = SAA7115_COMPOSITE2,
448 .amux = EM28XX_AMUX_VIDEO,
449 }, {
450 .type = EM28XX_VMUX_COMPOSITE1,
451 .vmux = SAA7115_COMPOSITE0,
452 .amux = EM28XX_AMUX_LINE_IN,
453 }, {
454 .type = EM28XX_VMUX_SVIDEO,
455 .vmux = SAA7115_COMPOSITE0,
456 .amux = EM28XX_AMUX_LINE_IN,
457 } },
458 },
459 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
460 .name = "Videology 20K14XUSB USB2.0",
461 .valid = EM28XX_BOARD_NOT_VALIDATED,
462 .tuner_type = TUNER_ABSENT,
463 .is_webcam = 1,
464 .input = { {
465 .type = EM28XX_VMUX_COMPOSITE1,
466 .vmux = 0,
467 .amux = EM28XX_AMUX_VIDEO,
468 } },
469 },
470 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
471 .name = "Silvercrest Webcam 1.3mpix",
472 .tuner_type = TUNER_ABSENT,
473 .is_webcam = 1,
474 .input = { {
475 .type = EM28XX_VMUX_COMPOSITE1,
476 .vmux = 0,
477 .amux = EM28XX_AMUX_VIDEO,
478 .gpio = silvercrest_reg_seq,
479 } },
480 },
481 [EM2821_BOARD_SUPERCOMP_USB_2] = {
482 .name = "Supercomp USB 2.0 TV",
483 .valid = EM28XX_BOARD_NOT_VALIDATED,
484 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
485 .tda9887_conf = TDA9887_PRESENT |
486 TDA9887_PORT1_ACTIVE |
487 TDA9887_PORT2_ACTIVE,
488 .decoder = EM28XX_SAA711X,
489 .input = { {
490 .type = EM28XX_VMUX_TELEVISION,
491 .vmux = SAA7115_COMPOSITE2,
492 .amux = EM28XX_AMUX_LINE_IN,
493 }, {
494 .type = EM28XX_VMUX_COMPOSITE1,
495 .vmux = SAA7115_COMPOSITE0,
496 .amux = EM28XX_AMUX_VIDEO,
497 }, {
498 .type = EM28XX_VMUX_SVIDEO,
499 .vmux = SAA7115_SVIDEO3,
500 .amux = EM28XX_AMUX_LINE_IN,
501 } },
502 },
503 [EM2821_BOARD_USBGEAR_VD204] = {
504 .name = "Usbgear VD204v9",
505 .valid = EM28XX_BOARD_NOT_VALIDATED,
506 .tuner_type = TUNER_ABSENT, /* Capture only device */
507 .decoder = EM28XX_SAA711X,
508 .input = { {
509 .type = EM28XX_VMUX_COMPOSITE1,
510 .vmux = SAA7115_COMPOSITE0,
511 .amux = EM28XX_AMUX_LINE_IN,
512 }, {
513 .type = EM28XX_VMUX_SVIDEO,
514 .vmux = SAA7115_SVIDEO3,
515 .amux = EM28XX_AMUX_LINE_IN,
516 } },
517 },
518 [EM2860_BOARD_NETGMBH_CAM] = {
519 /* Beijing Huaqi Information Digital Technology Co., Ltd */
520 .name = "NetGMBH Cam",
521 .valid = EM28XX_BOARD_NOT_VALIDATED,
522 .tuner_type = TUNER_ABSENT,
523 .is_webcam = 1,
524 .input = { {
525 .type = EM28XX_VMUX_COMPOSITE1,
526 .vmux = 0,
527 .amux = EM28XX_AMUX_VIDEO,
528 } },
529 },
530 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
531 .name = "Typhoon DVD Maker",
532 .decoder = EM28XX_SAA711X,
533 .tuner_type = TUNER_ABSENT, /* Capture only device */
534 .input = { {
535 .type = EM28XX_VMUX_COMPOSITE1,
536 .vmux = SAA7115_COMPOSITE0,
537 .amux = EM28XX_AMUX_LINE_IN,
538 }, {
539 .type = EM28XX_VMUX_SVIDEO,
540 .vmux = SAA7115_SVIDEO3,
541 .amux = EM28XX_AMUX_LINE_IN,
542 } },
543 },
544 [EM2860_BOARD_GADMEI_UTV330] = {
545 .name = "Gadmei UTV330",
546 .valid = EM28XX_BOARD_NOT_VALIDATED,
547 .tuner_type = TUNER_TNF_5335MF,
548 .tda9887_conf = TDA9887_PRESENT,
549 .decoder = EM28XX_SAA711X,
550 .input = { {
551 .type = EM28XX_VMUX_TELEVISION,
552 .vmux = SAA7115_COMPOSITE2,
553 .amux = EM28XX_AMUX_VIDEO,
554 }, {
555 .type = EM28XX_VMUX_COMPOSITE1,
556 .vmux = SAA7115_COMPOSITE0,
557 .amux = EM28XX_AMUX_LINE_IN,
558 }, {
559 .type = EM28XX_VMUX_SVIDEO,
560 .vmux = SAA7115_SVIDEO3,
561 .amux = EM28XX_AMUX_LINE_IN,
562 } },
563 },
564 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
565 .name = "Gadmei UTV330+",
566 .tuner_type = TUNER_TNF_5335MF,
567 .tda9887_conf = TDA9887_PRESENT,
568 .ir_codes = &ir_codes_gadmei_rm008z_table,
569 .decoder = EM28XX_SAA711X,
570 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
571 .input = { {
572 .type = EM28XX_VMUX_TELEVISION,
573 .vmux = SAA7115_COMPOSITE2,
574 .amux = EM28XX_AMUX_VIDEO,
575 }, {
576 .type = EM28XX_VMUX_COMPOSITE1,
577 .vmux = SAA7115_COMPOSITE0,
578 .amux = EM28XX_AMUX_LINE_IN,
579 }, {
580 .type = EM28XX_VMUX_SVIDEO,
581 .vmux = SAA7115_SVIDEO3,
582 .amux = EM28XX_AMUX_LINE_IN,
583 } },
584 },
585 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
586 .name = "Terratec Cinergy A Hybrid XS",
587 .valid = EM28XX_BOARD_NOT_VALIDATED,
588 .tuner_type = TUNER_XC2028,
589 .tuner_gpio = default_tuner_gpio,
590 .decoder = EM28XX_TVP5150,
591
592 .input = { {
593 .type = EM28XX_VMUX_TELEVISION,
594 .vmux = TVP5150_COMPOSITE0,
595 .amux = EM28XX_AMUX_VIDEO,
596 .gpio = hauppauge_wintv_hvr_900_analog,
597 }, {
598 .type = EM28XX_VMUX_COMPOSITE1,
599 .vmux = TVP5150_COMPOSITE1,
600 .amux = EM28XX_AMUX_LINE_IN,
601 .gpio = hauppauge_wintv_hvr_900_analog,
602 }, {
603 .type = EM28XX_VMUX_SVIDEO,
604 .vmux = TVP5150_SVIDEO,
605 .amux = EM28XX_AMUX_LINE_IN,
606 .gpio = hauppauge_wintv_hvr_900_analog,
607 } },
608 },
609 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
610 .name = "KWorld PVRTV 300U",
611 .valid = EM28XX_BOARD_NOT_VALIDATED,
612 .tuner_type = TUNER_XC2028,
613 .tuner_gpio = default_tuner_gpio,
614 .decoder = EM28XX_TVP5150,
615 .input = { {
616 .type = EM28XX_VMUX_TELEVISION,
617 .vmux = TVP5150_COMPOSITE0,
618 .amux = EM28XX_AMUX_VIDEO,
619 }, {
620 .type = EM28XX_VMUX_COMPOSITE1,
621 .vmux = TVP5150_COMPOSITE1,
622 .amux = EM28XX_AMUX_LINE_IN,
623 }, {
624 .type = EM28XX_VMUX_SVIDEO,
625 .vmux = TVP5150_SVIDEO,
626 .amux = EM28XX_AMUX_LINE_IN,
627 } },
628 },
629 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
630 .name = "Yakumo MovieMixer",
631 .tuner_type = TUNER_ABSENT, /* Capture only device */
632 .decoder = EM28XX_TVP5150,
633 .input = { {
634 .type = EM28XX_VMUX_TELEVISION,
635 .vmux = TVP5150_COMPOSITE0,
636 .amux = EM28XX_AMUX_VIDEO,
637 }, {
638 .type = EM28XX_VMUX_COMPOSITE1,
639 .vmux = TVP5150_COMPOSITE1,
640 .amux = EM28XX_AMUX_LINE_IN,
641 }, {
642 .type = EM28XX_VMUX_SVIDEO,
643 .vmux = TVP5150_SVIDEO,
644 .amux = EM28XX_AMUX_LINE_IN,
645 } },
646 },
647 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
648 .name = "Plextor ConvertX PX-TV100U",
649 .tuner_type = TUNER_TNF_5335MF,
650 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
651 EM28XX_XCLK_FREQUENCY_12MHZ,
652 .tda9887_conf = TDA9887_PRESENT,
653 .decoder = EM28XX_TVP5150,
654 .has_msp34xx = 1,
655 .input = { {
656 .type = EM28XX_VMUX_TELEVISION,
657 .vmux = TVP5150_COMPOSITE0,
658 .amux = EM28XX_AMUX_LINE_IN,
659 .gpio = pinnacle_hybrid_pro_analog,
660 }, {
661 .type = EM28XX_VMUX_COMPOSITE1,
662 .vmux = TVP5150_COMPOSITE1,
663 .amux = EM28XX_AMUX_LINE_IN,
664 .gpio = pinnacle_hybrid_pro_analog,
665 }, {
666 .type = EM28XX_VMUX_SVIDEO,
667 .vmux = TVP5150_SVIDEO,
668 .amux = EM28XX_AMUX_LINE_IN,
669 .gpio = pinnacle_hybrid_pro_analog,
670 } },
671 },
672
673 /* Those boards with em2870 are DVB Only*/
674
675 [EM2870_BOARD_TERRATEC_XS] = {
676 .name = "Terratec Cinergy T XS",
677 .valid = EM28XX_BOARD_NOT_VALIDATED,
678 .tuner_type = TUNER_XC2028,
679 .tuner_gpio = default_tuner_gpio,
680 },
681 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
682 .name = "Terratec Cinergy T XS (MT2060)",
683 .valid = EM28XX_BOARD_NOT_VALIDATED,
684 .tuner_type = TUNER_ABSENT, /* MT2060 */
685 },
686 [EM2870_BOARD_KWORLD_350U] = {
687 .name = "Kworld 350 U DVB-T",
688 .valid = EM28XX_BOARD_NOT_VALIDATED,
689 .tuner_type = TUNER_XC2028,
690 .tuner_gpio = default_tuner_gpio,
691 },
692 [EM2870_BOARD_KWORLD_355U] = {
693 .name = "Kworld 355 U DVB-T",
694 .valid = EM28XX_BOARD_NOT_VALIDATED,
695 },
696 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
697 .name = "Pinnacle PCTV DVB-T",
698 .valid = EM28XX_BOARD_NOT_VALIDATED,
699 .tuner_type = TUNER_ABSENT, /* MT2060 */
700 /* djh - I have serious doubts this is right... */
701 .xclk = EM28XX_XCLK_IR_RC5_MODE |
702 EM28XX_XCLK_FREQUENCY_10MHZ,
703 },
704 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
705 .name = "Compro, VideoMate U3",
706 .valid = EM28XX_BOARD_NOT_VALIDATED,
707 .tuner_type = TUNER_ABSENT, /* MT2060 */
708 },
709
710 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
711 .name = "Terratec Hybrid XS Secam",
712 .valid = EM28XX_BOARD_NOT_VALIDATED,
713 .has_msp34xx = 1,
714 .tuner_type = TUNER_XC2028,
715 .tuner_gpio = default_tuner_gpio,
716 .decoder = EM28XX_TVP5150,
717 .input = { {
718 .type = EM28XX_VMUX_TELEVISION,
719 .vmux = TVP5150_COMPOSITE0,
720 .amux = EM28XX_AMUX_VIDEO,
721 .gpio = default_analog,
722 }, {
723 .type = EM28XX_VMUX_COMPOSITE1,
724 .vmux = TVP5150_COMPOSITE1,
725 .amux = EM28XX_AMUX_LINE_IN,
726 .gpio = default_analog,
727 }, {
728 .type = EM28XX_VMUX_SVIDEO,
729 .vmux = TVP5150_SVIDEO,
730 .amux = EM28XX_AMUX_LINE_IN,
731 .gpio = default_analog,
732 } },
733 },
734 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
735 .name = "Hauppauge WinTV HVR 900",
736 .tda9887_conf = TDA9887_PRESENT,
737 .tuner_type = TUNER_XC2028,
738 .tuner_gpio = default_tuner_gpio,
739 .mts_firmware = 1,
740 .has_dvb = 1,
741 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
742 .ir_codes = &ir_codes_hauppauge_new_table,
743 .decoder = EM28XX_TVP5150,
744 .input = { {
745 .type = EM28XX_VMUX_TELEVISION,
746 .vmux = TVP5150_COMPOSITE0,
747 .amux = EM28XX_AMUX_VIDEO,
748 .gpio = hauppauge_wintv_hvr_900_analog,
749 }, {
750 .type = EM28XX_VMUX_COMPOSITE1,
751 .vmux = TVP5150_COMPOSITE1,
752 .amux = EM28XX_AMUX_LINE_IN,
753 .gpio = hauppauge_wintv_hvr_900_analog,
754 }, {
755 .type = EM28XX_VMUX_SVIDEO,
756 .vmux = TVP5150_SVIDEO,
757 .amux = EM28XX_AMUX_LINE_IN,
758 .gpio = hauppauge_wintv_hvr_900_analog,
759 } },
760 },
761 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
762 .name = "Hauppauge WinTV HVR 900 (R2)",
763 .tda9887_conf = TDA9887_PRESENT,
764 .tuner_type = TUNER_XC2028,
765 .tuner_gpio = default_tuner_gpio,
766 .mts_firmware = 1,
767 .ir_codes = &ir_codes_hauppauge_new_table,
768 .decoder = EM28XX_TVP5150,
769 .input = { {
770 .type = EM28XX_VMUX_TELEVISION,
771 .vmux = TVP5150_COMPOSITE0,
772 .amux = EM28XX_AMUX_VIDEO,
773 .gpio = hauppauge_wintv_hvr_900_analog,
774 }, {
775 .type = EM28XX_VMUX_COMPOSITE1,
776 .vmux = TVP5150_COMPOSITE1,
777 .amux = EM28XX_AMUX_LINE_IN,
778 .gpio = hauppauge_wintv_hvr_900_analog,
779 }, {
780 .type = EM28XX_VMUX_SVIDEO,
781 .vmux = TVP5150_SVIDEO,
782 .amux = EM28XX_AMUX_LINE_IN,
783 .gpio = hauppauge_wintv_hvr_900_analog,
784 } },
785 },
786 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
787 .name = "Hauppauge WinTV HVR 850",
788 .tuner_type = TUNER_XC2028,
789 .tuner_gpio = default_tuner_gpio,
790 .mts_firmware = 1,
791 .has_dvb = 1,
792 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
793 .ir_codes = &ir_codes_hauppauge_new_table,
794 .decoder = EM28XX_TVP5150,
795 .input = { {
796 .type = EM28XX_VMUX_TELEVISION,
797 .vmux = TVP5150_COMPOSITE0,
798 .amux = EM28XX_AMUX_VIDEO,
799 .gpio = hauppauge_wintv_hvr_900_analog,
800 }, {
801 .type = EM28XX_VMUX_COMPOSITE1,
802 .vmux = TVP5150_COMPOSITE1,
803 .amux = EM28XX_AMUX_LINE_IN,
804 .gpio = hauppauge_wintv_hvr_900_analog,
805 }, {
806 .type = EM28XX_VMUX_SVIDEO,
807 .vmux = TVP5150_SVIDEO,
808 .amux = EM28XX_AMUX_LINE_IN,
809 .gpio = hauppauge_wintv_hvr_900_analog,
810 } },
811 },
812 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
813 .name = "Hauppauge WinTV HVR 950",
814 .tuner_type = TUNER_XC2028,
815 .tuner_gpio = default_tuner_gpio,
816 .mts_firmware = 1,
817 .has_dvb = 1,
818 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
819 .ir_codes = &ir_codes_hauppauge_new_table,
820 .decoder = EM28XX_TVP5150,
821 .input = { {
822 .type = EM28XX_VMUX_TELEVISION,
823 .vmux = TVP5150_COMPOSITE0,
824 .amux = EM28XX_AMUX_VIDEO,
825 .gpio = hauppauge_wintv_hvr_900_analog,
826 }, {
827 .type = EM28XX_VMUX_COMPOSITE1,
828 .vmux = TVP5150_COMPOSITE1,
829 .amux = EM28XX_AMUX_LINE_IN,
830 .gpio = hauppauge_wintv_hvr_900_analog,
831 }, {
832 .type = EM28XX_VMUX_SVIDEO,
833 .vmux = TVP5150_SVIDEO,
834 .amux = EM28XX_AMUX_LINE_IN,
835 .gpio = hauppauge_wintv_hvr_900_analog,
836 } },
837 },
838 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
839 .name = "Pinnacle PCTV HD Pro Stick",
840 .tuner_type = TUNER_XC2028,
841 .tuner_gpio = default_tuner_gpio,
842 .mts_firmware = 1,
843 .has_dvb = 1,
844 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
845 .ir_codes = &ir_codes_pinnacle_pctv_hd_table,
846 .decoder = EM28XX_TVP5150,
847 .input = { {
848 .type = EM28XX_VMUX_TELEVISION,
849 .vmux = TVP5150_COMPOSITE0,
850 .amux = EM28XX_AMUX_VIDEO,
851 .gpio = hauppauge_wintv_hvr_900_analog,
852 }, {
853 .type = EM28XX_VMUX_COMPOSITE1,
854 .vmux = TVP5150_COMPOSITE1,
855 .amux = EM28XX_AMUX_LINE_IN,
856 .gpio = hauppauge_wintv_hvr_900_analog,
857 }, {
858 .type = EM28XX_VMUX_SVIDEO,
859 .vmux = TVP5150_SVIDEO,
860 .amux = EM28XX_AMUX_LINE_IN,
861 .gpio = hauppauge_wintv_hvr_900_analog,
862 } },
863 },
864 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
865 .name = "AMD ATI TV Wonder HD 600",
866 .tuner_type = TUNER_XC2028,
867 .tuner_gpio = default_tuner_gpio,
868 .mts_firmware = 1,
869 .has_dvb = 1,
870 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
871 .ir_codes = &ir_codes_ati_tv_wonder_hd_600_table,
872 .decoder = EM28XX_TVP5150,
873 .input = { {
874 .type = EM28XX_VMUX_TELEVISION,
875 .vmux = TVP5150_COMPOSITE0,
876 .amux = EM28XX_AMUX_VIDEO,
877 .gpio = hauppauge_wintv_hvr_900_analog,
878 }, {
879 .type = EM28XX_VMUX_COMPOSITE1,
880 .vmux = TVP5150_COMPOSITE1,
881 .amux = EM28XX_AMUX_LINE_IN,
882 .gpio = hauppauge_wintv_hvr_900_analog,
883 }, {
884 .type = EM28XX_VMUX_SVIDEO,
885 .vmux = TVP5150_SVIDEO,
886 .amux = EM28XX_AMUX_LINE_IN,
887 .gpio = hauppauge_wintv_hvr_900_analog,
888 } },
889 },
890 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
891 .name = "Terratec Hybrid XS",
892 .tuner_type = TUNER_XC2028,
893 .tuner_gpio = default_tuner_gpio,
894 .decoder = EM28XX_TVP5150,
895 .has_dvb = 1,
896 .dvb_gpio = default_digital,
897 .ir_codes = &ir_codes_terratec_cinergy_xs_table,
898 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
899 .input = { {
900 .type = EM28XX_VMUX_TELEVISION,
901 .vmux = TVP5150_COMPOSITE0,
902 .amux = EM28XX_AMUX_VIDEO,
903 .gpio = default_analog,
904 }, {
905 .type = EM28XX_VMUX_COMPOSITE1,
906 .vmux = TVP5150_COMPOSITE1,
907 .amux = EM28XX_AMUX_LINE_IN,
908 .gpio = default_analog,
909 }, {
910 .type = EM28XX_VMUX_SVIDEO,
911 .vmux = TVP5150_SVIDEO,
912 .amux = EM28XX_AMUX_LINE_IN,
913 .gpio = default_analog,
914 } },
915 },
916 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
917 as Prodigy XS with a different PID, let's keep it separated for now
918 maybe we'll need it lateron */
919 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
920 .name = "Terratec Prodigy XS",
921 .tuner_type = TUNER_XC2028,
922 .tuner_gpio = default_tuner_gpio,
923 .decoder = EM28XX_TVP5150,
924 .input = { {
925 .type = EM28XX_VMUX_TELEVISION,
926 .vmux = TVP5150_COMPOSITE0,
927 .amux = EM28XX_AMUX_VIDEO,
928 .gpio = hauppauge_wintv_hvr_900_analog,
929 }, {
930 .type = EM28XX_VMUX_COMPOSITE1,
931 .vmux = TVP5150_COMPOSITE1,
932 .amux = EM28XX_AMUX_LINE_IN,
933 .gpio = hauppauge_wintv_hvr_900_analog,
934 }, {
935 .type = EM28XX_VMUX_SVIDEO,
936 .vmux = TVP5150_SVIDEO,
937 .amux = EM28XX_AMUX_LINE_IN,
938 .gpio = hauppauge_wintv_hvr_900_analog,
939 } },
940 },
941 [EM2820_BOARD_MSI_VOX_USB_2] = {
942 .name = "MSI VOX USB 2.0",
943 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
944 .tda9887_conf = TDA9887_PRESENT |
945 TDA9887_PORT1_ACTIVE |
946 TDA9887_PORT2_ACTIVE,
947 .max_range_640_480 = 1,
948 .decoder = EM28XX_SAA711X,
949 .input = { {
950 .type = EM28XX_VMUX_TELEVISION,
951 .vmux = SAA7115_COMPOSITE4,
952 .amux = EM28XX_AMUX_VIDEO,
953 }, {
954 .type = EM28XX_VMUX_COMPOSITE1,
955 .vmux = SAA7115_COMPOSITE0,
956 .amux = EM28XX_AMUX_LINE_IN,
957 }, {
958 .type = EM28XX_VMUX_SVIDEO,
959 .vmux = SAA7115_SVIDEO3,
960 .amux = EM28XX_AMUX_LINE_IN,
961 } },
962 },
963 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
964 .name = "Terratec Cinergy 200 USB",
965 .is_em2800 = 1,
966 .has_ir_i2c = 1,
967 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
968 .tda9887_conf = TDA9887_PRESENT,
969 .decoder = EM28XX_SAA711X,
970 .input = { {
971 .type = EM28XX_VMUX_TELEVISION,
972 .vmux = SAA7115_COMPOSITE2,
973 .amux = EM28XX_AMUX_VIDEO,
974 }, {
975 .type = EM28XX_VMUX_COMPOSITE1,
976 .vmux = SAA7115_COMPOSITE0,
977 .amux = EM28XX_AMUX_LINE_IN,
978 }, {
979 .type = EM28XX_VMUX_SVIDEO,
980 .vmux = SAA7115_SVIDEO3,
981 .amux = EM28XX_AMUX_LINE_IN,
982 } },
983 },
984 [EM2800_BOARD_GRABBEEX_USB2800] = {
985 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
986 .is_em2800 = 1,
987 .decoder = EM28XX_SAA711X,
988 .tuner_type = TUNER_ABSENT, /* capture only board */
989 .input = { {
990 .type = EM28XX_VMUX_COMPOSITE1,
991 .vmux = SAA7115_COMPOSITE0,
992 .amux = EM28XX_AMUX_LINE_IN,
993 }, {
994 .type = EM28XX_VMUX_SVIDEO,
995 .vmux = SAA7115_SVIDEO3,
996 .amux = EM28XX_AMUX_LINE_IN,
997 } },
998 },
999 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1000 .name = "Leadtek Winfast USB II",
1001 .is_em2800 = 1,
1002 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1003 .tda9887_conf = TDA9887_PRESENT,
1004 .decoder = EM28XX_SAA711X,
1005 .input = { {
1006 .type = EM28XX_VMUX_TELEVISION,
1007 .vmux = SAA7115_COMPOSITE2,
1008 .amux = EM28XX_AMUX_VIDEO,
1009 }, {
1010 .type = EM28XX_VMUX_COMPOSITE1,
1011 .vmux = SAA7115_COMPOSITE0,
1012 .amux = EM28XX_AMUX_LINE_IN,
1013 }, {
1014 .type = EM28XX_VMUX_SVIDEO,
1015 .vmux = SAA7115_SVIDEO3,
1016 .amux = EM28XX_AMUX_LINE_IN,
1017 } },
1018 },
1019 [EM2800_BOARD_KWORLD_USB2800] = {
1020 .name = "Kworld USB2800",
1021 .is_em2800 = 1,
1022 .tuner_type = TUNER_PHILIPS_FCV1236D,
1023 .tda9887_conf = TDA9887_PRESENT,
1024 .decoder = EM28XX_SAA711X,
1025 .input = { {
1026 .type = EM28XX_VMUX_TELEVISION,
1027 .vmux = SAA7115_COMPOSITE2,
1028 .amux = EM28XX_AMUX_VIDEO,
1029 }, {
1030 .type = EM28XX_VMUX_COMPOSITE1,
1031 .vmux = SAA7115_COMPOSITE0,
1032 .amux = EM28XX_AMUX_LINE_IN,
1033 }, {
1034 .type = EM28XX_VMUX_SVIDEO,
1035 .vmux = SAA7115_SVIDEO3,
1036 .amux = EM28XX_AMUX_LINE_IN,
1037 } },
1038 },
1039 [EM2820_BOARD_PINNACLE_DVC_90] = {
1040 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1041 "/ Kworld DVD Maker 2",
1042 .tuner_type = TUNER_ABSENT, /* capture only board */
1043 .decoder = EM28XX_SAA711X,
1044 .input = { {
1045 .type = EM28XX_VMUX_COMPOSITE1,
1046 .vmux = SAA7115_COMPOSITE0,
1047 .amux = EM28XX_AMUX_LINE_IN,
1048 }, {
1049 .type = EM28XX_VMUX_SVIDEO,
1050 .vmux = SAA7115_SVIDEO3,
1051 .amux = EM28XX_AMUX_LINE_IN,
1052 } },
1053 },
1054 [EM2800_BOARD_VGEAR_POCKETTV] = {
1055 .name = "V-Gear PocketTV",
1056 .is_em2800 = 1,
1057 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1058 .tda9887_conf = TDA9887_PRESENT,
1059 .decoder = EM28XX_SAA711X,
1060 .input = { {
1061 .type = EM28XX_VMUX_TELEVISION,
1062 .vmux = SAA7115_COMPOSITE2,
1063 .amux = EM28XX_AMUX_VIDEO,
1064 }, {
1065 .type = EM28XX_VMUX_COMPOSITE1,
1066 .vmux = SAA7115_COMPOSITE0,
1067 .amux = EM28XX_AMUX_LINE_IN,
1068 }, {
1069 .type = EM28XX_VMUX_SVIDEO,
1070 .vmux = SAA7115_SVIDEO3,
1071 .amux = EM28XX_AMUX_LINE_IN,
1072 } },
1073 },
1074 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1075 .name = "Pixelview PlayTV Box 4 USB 2.0",
1076 .tda9887_conf = TDA9887_PRESENT,
1077 .tuner_type = TUNER_YMEC_TVF_5533MF,
1078 .decoder = EM28XX_SAA711X,
1079 .input = { {
1080 .type = EM28XX_VMUX_TELEVISION,
1081 .vmux = SAA7115_COMPOSITE2,
1082 .amux = EM28XX_AMUX_VIDEO,
1083 .aout = EM28XX_AOUT_MONO | /* I2S */
1084 EM28XX_AOUT_MASTER, /* Line out pin */
1085 }, {
1086 .type = EM28XX_VMUX_COMPOSITE1,
1087 .vmux = SAA7115_COMPOSITE0,
1088 .amux = EM28XX_AMUX_LINE_IN,
1089 }, {
1090 .type = EM28XX_VMUX_SVIDEO,
1091 .vmux = SAA7115_SVIDEO3,
1092 .amux = EM28XX_AMUX_LINE_IN,
1093 } },
1094 },
1095 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1096 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1097 .has_snapshot_button = 1,
1098 .tda9887_conf = TDA9887_PRESENT,
1099 .tuner_type = TUNER_YMEC_TVF_5533MF,
1100 .decoder = EM28XX_SAA711X,
1101 .input = { {
1102 .type = EM28XX_VMUX_TELEVISION,
1103 .vmux = SAA7115_COMPOSITE2,
1104 .amux = EM28XX_AMUX_VIDEO,
1105 .aout = EM28XX_AOUT_MONO | /* I2S */
1106 EM28XX_AOUT_MASTER, /* Line out pin */
1107 }, {
1108 .type = EM28XX_VMUX_COMPOSITE1,
1109 .vmux = SAA7115_COMPOSITE0,
1110 .amux = EM28XX_AMUX_LINE_IN,
1111 }, {
1112 .type = EM28XX_VMUX_SVIDEO,
1113 .vmux = SAA7115_SVIDEO3,
1114 .amux = EM28XX_AMUX_LINE_IN,
1115 } },
1116 },
1117 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1118 .name = "EM2860/SAA711X Reference Design",
1119 .has_snapshot_button = 1,
1120 .tuner_type = TUNER_ABSENT,
1121 .decoder = EM28XX_SAA711X,
1122 .input = { {
1123 .type = EM28XX_VMUX_SVIDEO,
1124 .vmux = SAA7115_SVIDEO3,
1125 }, {
1126 .type = EM28XX_VMUX_COMPOSITE1,
1127 .vmux = SAA7115_COMPOSITE0,
1128 } },
1129 },
1130 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1131 .name = "MSI DigiVox A/D",
1132 .valid = EM28XX_BOARD_NOT_VALIDATED,
1133 .tuner_type = TUNER_XC2028,
1134 .tuner_gpio = default_tuner_gpio,
1135 .decoder = EM28XX_TVP5150,
1136 .input = { {
1137 .type = EM28XX_VMUX_TELEVISION,
1138 .vmux = TVP5150_COMPOSITE0,
1139 .amux = EM28XX_AMUX_VIDEO,
1140 .gpio = em2880_msi_digivox_ad_analog,
1141 }, {
1142 .type = EM28XX_VMUX_COMPOSITE1,
1143 .vmux = TVP5150_COMPOSITE1,
1144 .amux = EM28XX_AMUX_LINE_IN,
1145 .gpio = em2880_msi_digivox_ad_analog,
1146 }, {
1147 .type = EM28XX_VMUX_SVIDEO,
1148 .vmux = TVP5150_SVIDEO,
1149 .amux = EM28XX_AMUX_LINE_IN,
1150 .gpio = em2880_msi_digivox_ad_analog,
1151 } },
1152 },
1153 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1154 .name = "MSI DigiVox A/D II",
1155 .valid = EM28XX_BOARD_NOT_VALIDATED,
1156 .tuner_type = TUNER_XC2028,
1157 .tuner_gpio = default_tuner_gpio,
1158 .decoder = EM28XX_TVP5150,
1159 .input = { {
1160 .type = EM28XX_VMUX_TELEVISION,
1161 .vmux = TVP5150_COMPOSITE0,
1162 .amux = EM28XX_AMUX_VIDEO,
1163 .gpio = em2880_msi_digivox_ad_analog,
1164 }, {
1165 .type = EM28XX_VMUX_COMPOSITE1,
1166 .vmux = TVP5150_COMPOSITE1,
1167 .amux = EM28XX_AMUX_LINE_IN,
1168 .gpio = em2880_msi_digivox_ad_analog,
1169 }, {
1170 .type = EM28XX_VMUX_SVIDEO,
1171 .vmux = TVP5150_SVIDEO,
1172 .amux = EM28XX_AMUX_LINE_IN,
1173 .gpio = em2880_msi_digivox_ad_analog,
1174 } },
1175 },
1176 [EM2880_BOARD_KWORLD_DVB_305U] = {
1177 .name = "KWorld DVB-T 305U",
1178 .valid = EM28XX_BOARD_NOT_VALIDATED,
1179 .tuner_type = TUNER_XC2028,
1180 .tuner_gpio = default_tuner_gpio,
1181 .decoder = EM28XX_TVP5150,
1182 .input = { {
1183 .type = EM28XX_VMUX_TELEVISION,
1184 .vmux = TVP5150_COMPOSITE0,
1185 .amux = EM28XX_AMUX_VIDEO,
1186 }, {
1187 .type = EM28XX_VMUX_COMPOSITE1,
1188 .vmux = TVP5150_COMPOSITE1,
1189 .amux = EM28XX_AMUX_LINE_IN,
1190 }, {
1191 .type = EM28XX_VMUX_SVIDEO,
1192 .vmux = TVP5150_SVIDEO,
1193 .amux = EM28XX_AMUX_LINE_IN,
1194 } },
1195 },
1196 [EM2880_BOARD_KWORLD_DVB_310U] = {
1197 .name = "KWorld DVB-T 310U",
1198 .tuner_type = TUNER_XC2028,
1199 .tuner_gpio = default_tuner_gpio,
1200 .has_dvb = 1,
1201 .dvb_gpio = default_digital,
1202 .mts_firmware = 1,
1203 .decoder = EM28XX_TVP5150,
1204 .input = { {
1205 .type = EM28XX_VMUX_TELEVISION,
1206 .vmux = TVP5150_COMPOSITE0,
1207 .amux = EM28XX_AMUX_VIDEO,
1208 .gpio = default_analog,
1209 }, {
1210 .type = EM28XX_VMUX_COMPOSITE1,
1211 .vmux = TVP5150_COMPOSITE1,
1212 .amux = EM28XX_AMUX_LINE_IN,
1213 .gpio = default_analog,
1214 }, { /* S-video has not been tested yet */
1215 .type = EM28XX_VMUX_SVIDEO,
1216 .vmux = TVP5150_SVIDEO,
1217 .amux = EM28XX_AMUX_LINE_IN,
1218 .gpio = default_analog,
1219 } },
1220 },
1221 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1222 .name = "KWorld ATSC 315U HDTV TV Box",
1223 .valid = EM28XX_BOARD_NOT_VALIDATED,
1224 .tuner_type = TUNER_THOMSON_DTT761X,
1225 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1226 .tda9887_conf = TDA9887_PRESENT,
1227 .decoder = EM28XX_SAA711X,
1228 .has_dvb = 1,
1229 .dvb_gpio = em2882_kworld_315u_digital,
1230 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1231 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1232 /* Analog mode - still not ready */
1233 /*.input = { {
1234 .type = EM28XX_VMUX_TELEVISION,
1235 .vmux = SAA7115_COMPOSITE2,
1236 .amux = EM28XX_AMUX_VIDEO,
1237 .gpio = em2882_kworld_315u_analog,
1238 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1239 }, {
1240 .type = EM28XX_VMUX_COMPOSITE1,
1241 .vmux = SAA7115_COMPOSITE0,
1242 .amux = EM28XX_AMUX_LINE_IN,
1243 .gpio = em2882_kworld_315u_analog1,
1244 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1245 }, {
1246 .type = EM28XX_VMUX_SVIDEO,
1247 .vmux = SAA7115_SVIDEO3,
1248 .amux = EM28XX_AMUX_LINE_IN,
1249 .gpio = em2882_kworld_315u_analog1,
1250 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1251 } }, */
1252 },
1253 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1254 .name = "Empire dual TV",
1255 .tuner_type = TUNER_XC2028,
1256 .tuner_gpio = default_tuner_gpio,
1257 .has_dvb = 1,
1258 .dvb_gpio = default_digital,
1259 .mts_firmware = 1,
1260 .decoder = EM28XX_TVP5150,
1261 .input = { {
1262 .type = EM28XX_VMUX_TELEVISION,
1263 .vmux = TVP5150_COMPOSITE0,
1264 .amux = EM28XX_AMUX_VIDEO,
1265 .gpio = default_analog,
1266 }, {
1267 .type = EM28XX_VMUX_COMPOSITE1,
1268 .vmux = TVP5150_COMPOSITE1,
1269 .amux = EM28XX_AMUX_LINE_IN,
1270 .gpio = default_analog,
1271 }, {
1272 .type = EM28XX_VMUX_SVIDEO,
1273 .vmux = TVP5150_SVIDEO,
1274 .amux = EM28XX_AMUX_LINE_IN,
1275 .gpio = default_analog,
1276 } },
1277 },
1278 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1279 .name = "DNT DA2 Hybrid",
1280 .valid = EM28XX_BOARD_NOT_VALIDATED,
1281 .tuner_type = TUNER_XC2028,
1282 .tuner_gpio = default_tuner_gpio,
1283 .decoder = EM28XX_TVP5150,
1284 .input = { {
1285 .type = EM28XX_VMUX_TELEVISION,
1286 .vmux = TVP5150_COMPOSITE0,
1287 .amux = EM28XX_AMUX_VIDEO,
1288 .gpio = default_analog,
1289 }, {
1290 .type = EM28XX_VMUX_COMPOSITE1,
1291 .vmux = TVP5150_COMPOSITE1,
1292 .amux = EM28XX_AMUX_LINE_IN,
1293 .gpio = default_analog,
1294 }, {
1295 .type = EM28XX_VMUX_SVIDEO,
1296 .vmux = TVP5150_SVIDEO,
1297 .amux = EM28XX_AMUX_LINE_IN,
1298 .gpio = default_analog,
1299 } },
1300 },
1301 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1302 .name = "Pinnacle Hybrid Pro",
1303 .tuner_type = TUNER_XC2028,
1304 .tuner_gpio = default_tuner_gpio,
1305 .decoder = EM28XX_TVP5150,
1306 .has_dvb = 1,
1307 .dvb_gpio = pinnacle_hybrid_pro_digital,
1308 .input = { {
1309 .type = EM28XX_VMUX_TELEVISION,
1310 .vmux = TVP5150_COMPOSITE0,
1311 .amux = EM28XX_AMUX_VIDEO,
1312 .gpio = pinnacle_hybrid_pro_analog,
1313 }, {
1314 .type = EM28XX_VMUX_COMPOSITE1,
1315 .vmux = TVP5150_COMPOSITE1,
1316 .amux = EM28XX_AMUX_LINE_IN,
1317 .gpio = pinnacle_hybrid_pro_analog,
1318 }, {
1319 .type = EM28XX_VMUX_SVIDEO,
1320 .vmux = TVP5150_SVIDEO,
1321 .amux = EM28XX_AMUX_LINE_IN,
1322 .gpio = pinnacle_hybrid_pro_analog,
1323 } },
1324 },
1325 [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1326 .name = "Pinnacle Hybrid Pro (2)",
1327 .valid = EM28XX_BOARD_NOT_VALIDATED,
1328 .tuner_type = TUNER_XC2028,
1329 .tuner_gpio = default_tuner_gpio,
1330 .mts_firmware = 1,
1331 .decoder = EM28XX_TVP5150,
1332 .input = { {
1333 .type = EM28XX_VMUX_TELEVISION,
1334 .vmux = TVP5150_COMPOSITE0,
1335 .amux = EM28XX_AMUX_VIDEO,
1336 .gpio = hauppauge_wintv_hvr_900_analog,
1337 }, {
1338 .type = EM28XX_VMUX_COMPOSITE1,
1339 .vmux = TVP5150_COMPOSITE1,
1340 .amux = EM28XX_AMUX_LINE_IN,
1341 .gpio = hauppauge_wintv_hvr_900_analog,
1342 }, {
1343 .type = EM28XX_VMUX_SVIDEO,
1344 .vmux = TVP5150_SVIDEO,
1345 .amux = EM28XX_AMUX_LINE_IN,
1346 .gpio = hauppauge_wintv_hvr_900_analog,
1347 } },
1348 },
1349 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1350 .name = "Kworld VS-DVB-T 323UR",
1351 .valid = EM28XX_BOARD_NOT_VALIDATED,
1352 .tuner_type = TUNER_XC2028,
1353 .tuner_gpio = default_tuner_gpio,
1354 .decoder = EM28XX_TVP5150,
1355 .input = { {
1356 .type = EM28XX_VMUX_TELEVISION,
1357 .vmux = TVP5150_COMPOSITE0,
1358 .amux = EM28XX_AMUX_VIDEO,
1359 }, {
1360 .type = EM28XX_VMUX_COMPOSITE1,
1361 .vmux = TVP5150_COMPOSITE1,
1362 .amux = EM28XX_AMUX_LINE_IN,
1363 }, {
1364 .type = EM28XX_VMUX_SVIDEO,
1365 .vmux = TVP5150_SVIDEO,
1366 .amux = EM28XX_AMUX_LINE_IN,
1367 } },
1368 },
1369 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1370 .name = "Terratec Hybrid XS (em2882)",
1371 .valid = EM28XX_BOARD_NOT_VALIDATED,
1372 .tuner_type = TUNER_XC2028,
1373 .tuner_gpio = default_tuner_gpio,
1374 .decoder = EM28XX_TVP5150,
1375 .input = { {
1376 .type = EM28XX_VMUX_TELEVISION,
1377 .vmux = TVP5150_COMPOSITE0,
1378 .amux = EM28XX_AMUX_VIDEO,
1379 .gpio = hauppauge_wintv_hvr_900_analog,
1380 }, {
1381 .type = EM28XX_VMUX_COMPOSITE1,
1382 .vmux = TVP5150_COMPOSITE1,
1383 .amux = EM28XX_AMUX_LINE_IN,
1384 .gpio = hauppauge_wintv_hvr_900_analog,
1385 }, {
1386 .type = EM28XX_VMUX_SVIDEO,
1387 .vmux = TVP5150_SVIDEO,
1388 .amux = EM28XX_AMUX_LINE_IN,
1389 .gpio = hauppauge_wintv_hvr_900_analog,
1390 } },
1391 },
1392 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1393 .name = "Kworld PlusTV HD Hybrid 330",
1394 .tuner_type = TUNER_XC2028,
1395 .tuner_gpio = default_tuner_gpio,
1396 .decoder = EM28XX_TVP5150,
1397 .mts_firmware = 1,
1398 .has_dvb = 1,
1399 .dvb_gpio = kworld_330u_digital,
1400 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1401 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1402 EM28XX_I2C_EEPROM_ON_BOARD |
1403 EM28XX_I2C_EEPROM_KEY_VALID,
1404 .input = { {
1405 .type = EM28XX_VMUX_TELEVISION,
1406 .vmux = TVP5150_COMPOSITE0,
1407 .amux = EM28XX_AMUX_VIDEO,
1408 .gpio = kworld_330u_analog,
1409 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1410 }, {
1411 .type = EM28XX_VMUX_COMPOSITE1,
1412 .vmux = TVP5150_COMPOSITE1,
1413 .amux = EM28XX_AMUX_LINE_IN,
1414 .gpio = kworld_330u_analog,
1415 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1416 }, {
1417 .type = EM28XX_VMUX_SVIDEO,
1418 .vmux = TVP5150_SVIDEO,
1419 .amux = EM28XX_AMUX_LINE_IN,
1420 .gpio = kworld_330u_analog,
1421 } },
1422 },
1423 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1424 .name = "Compro VideoMate ForYou/Stereo",
1425 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1426 .tvaudio_addr = 0xb0,
1427 .tda9887_conf = TDA9887_PRESENT,
1428 .decoder = EM28XX_TVP5150,
1429 .adecoder = EM28XX_TVAUDIO,
1430 .mute_gpio = compro_mute_gpio,
1431 .input = { {
1432 .type = EM28XX_VMUX_TELEVISION,
1433 .vmux = TVP5150_COMPOSITE0,
1434 .amux = EM28XX_AMUX_VIDEO,
1435 .gpio = compro_unmute_tv_gpio,
1436 }, {
1437 .type = EM28XX_VMUX_SVIDEO,
1438 .vmux = TVP5150_SVIDEO,
1439 .amux = EM28XX_AMUX_LINE_IN,
1440 .gpio = compro_unmute_svid_gpio,
1441 } },
1442 },
1443 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1444 .name = "Kaiomy TVnPC U2",
1445 .vchannels = 3,
1446 .tuner_type = TUNER_XC2028,
1447 .tuner_addr = 0x61,
1448 .mts_firmware = 1,
1449 .decoder = EM28XX_TVP5150,
1450 .tuner_gpio = default_tuner_gpio,
1451 .ir_codes = &ir_codes_kaiomy_table,
1452 .input = { {
1453 .type = EM28XX_VMUX_TELEVISION,
1454 .vmux = TVP5150_COMPOSITE0,
1455 .amux = EM28XX_AMUX_VIDEO,
1456
1457 }, {
1458 .type = EM28XX_VMUX_COMPOSITE1,
1459 .vmux = TVP5150_COMPOSITE1,
1460 .amux = EM28XX_AMUX_LINE_IN,
1461 }, {
1462 .type = EM28XX_VMUX_SVIDEO,
1463 .vmux = TVP5150_SVIDEO,
1464 .amux = EM28XX_AMUX_LINE_IN,
1465 } },
1466 .radio = {
1467 .type = EM28XX_RADIO,
1468 .amux = EM28XX_AMUX_LINE_IN,
1469 }
1470 },
1471 [EM2860_BOARD_EASYCAP] = {
1472 .name = "Easy Cap Capture DC-60",
1473 .vchannels = 2,
1474 .tuner_type = TUNER_ABSENT,
1475 .decoder = EM28XX_SAA711X,
1476 .input = { {
1477 .type = EM28XX_VMUX_COMPOSITE1,
1478 .vmux = SAA7115_COMPOSITE0,
1479 .amux = EM28XX_AMUX_LINE_IN,
1480 }, {
1481 .type = EM28XX_VMUX_SVIDEO,
1482 .vmux = SAA7115_SVIDEO3,
1483 .amux = EM28XX_AMUX_LINE_IN,
1484 } },
1485 },
1486 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1487 .name = "IO-DATA GV-MVP/SZ",
1488 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1489 .tuner_gpio = default_tuner_gpio,
1490 .tda9887_conf = TDA9887_PRESENT,
1491 .decoder = EM28XX_TVP5150,
1492 .input = { {
1493 .type = EM28XX_VMUX_TELEVISION,
1494 .vmux = TVP5150_COMPOSITE0,
1495 .amux = EM28XX_AMUX_VIDEO,
1496 }, { /* Composite has not been tested yet */
1497 .type = EM28XX_VMUX_COMPOSITE1,
1498 .vmux = TVP5150_COMPOSITE1,
1499 .amux = EM28XX_AMUX_VIDEO,
1500 }, { /* S-video has not been tested yet */
1501 .type = EM28XX_VMUX_SVIDEO,
1502 .vmux = TVP5150_SVIDEO,
1503 .amux = EM28XX_AMUX_VIDEO,
1504 } },
1505 },
1506 [EM2860_BOARD_TERRATEC_GRABBY] = {
1507 .name = "Terratec Grabby",
1508 .vchannels = 2,
1509 .tuner_type = TUNER_ABSENT,
1510 .decoder = EM28XX_SAA711X,
1511 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1512 .input = { {
1513 .type = EM28XX_VMUX_COMPOSITE1,
1514 .vmux = SAA7115_COMPOSITE0,
1515 .amux = EM28XX_AMUX_VIDEO2,
1516 }, {
1517 .type = EM28XX_VMUX_SVIDEO,
1518 .vmux = SAA7115_SVIDEO3,
1519 .amux = EM28XX_AMUX_VIDEO2,
1520 } },
1521 },
1522 [EM2860_BOARD_TERRATEC_AV350] = {
1523 .name = "Terratec AV350",
1524 .vchannels = 2,
1525 .tuner_type = TUNER_ABSENT,
1526 .decoder = EM28XX_TVP5150,
1527 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1528 .mute_gpio = terratec_av350_mute_gpio,
1529 .input = { {
1530 .type = EM28XX_VMUX_COMPOSITE1,
1531 .vmux = TVP5150_COMPOSITE1,
1532 .amux = EM28XX_AUDIO_SRC_LINE,
1533 .gpio = terratec_av350_unmute_gpio,
1534
1535 }, {
1536 .type = EM28XX_VMUX_SVIDEO,
1537 .vmux = TVP5150_SVIDEO,
1538 .amux = EM28XX_AUDIO_SRC_LINE,
1539 .gpio = terratec_av350_unmute_gpio,
1540 } },
1541 },
1542 [EM2882_BOARD_EVGA_INDTUBE] = {
1543 .name = "Evga inDtube",
1544 .tuner_type = TUNER_XC2028,
1545 .tuner_gpio = default_tuner_gpio,
1546 .decoder = EM28XX_TVP5150,
1547 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1548 .mts_firmware = 1,
1549 .has_dvb = 1,
1550 .dvb_gpio = evga_indtube_digital,
1551 .ir_codes = &ir_codes_evga_indtube_table,
1552 .input = { {
1553 .type = EM28XX_VMUX_TELEVISION,
1554 .vmux = TVP5150_COMPOSITE0,
1555 .amux = EM28XX_AMUX_VIDEO,
1556 .gpio = evga_indtube_analog,
1557 }, {
1558 .type = EM28XX_VMUX_COMPOSITE1,
1559 .vmux = TVP5150_COMPOSITE1,
1560 .amux = EM28XX_AMUX_LINE_IN,
1561 .gpio = evga_indtube_analog,
1562 }, {
1563 .type = EM28XX_VMUX_SVIDEO,
1564 .vmux = TVP5150_SVIDEO,
1565 .amux = EM28XX_AMUX_LINE_IN,
1566 .gpio = evga_indtube_analog,
1567 } },
1568 },
1569 };
1570 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1571
1572 /* table of devices that work with this driver */
1573 struct usb_device_id em28xx_id_table[] = {
1574 { USB_DEVICE(0xeb1a, 0x2750),
1575 .driver_info = EM2750_BOARD_UNKNOWN },
1576 { USB_DEVICE(0xeb1a, 0x2751),
1577 .driver_info = EM2750_BOARD_UNKNOWN },
1578 { USB_DEVICE(0xeb1a, 0x2800),
1579 .driver_info = EM2800_BOARD_UNKNOWN },
1580 { USB_DEVICE(0xeb1a, 0x2710),
1581 .driver_info = EM2820_BOARD_UNKNOWN },
1582 { USB_DEVICE(0xeb1a, 0x2820),
1583 .driver_info = EM2820_BOARD_UNKNOWN },
1584 { USB_DEVICE(0xeb1a, 0x2821),
1585 .driver_info = EM2820_BOARD_UNKNOWN },
1586 { USB_DEVICE(0xeb1a, 0x2860),
1587 .driver_info = EM2820_BOARD_UNKNOWN },
1588 { USB_DEVICE(0xeb1a, 0x2861),
1589 .driver_info = EM2820_BOARD_UNKNOWN },
1590 { USB_DEVICE(0xeb1a, 0x2870),
1591 .driver_info = EM2820_BOARD_UNKNOWN },
1592 { USB_DEVICE(0xeb1a, 0x2881),
1593 .driver_info = EM2820_BOARD_UNKNOWN },
1594 { USB_DEVICE(0xeb1a, 0x2883),
1595 .driver_info = EM2820_BOARD_UNKNOWN },
1596 { USB_DEVICE(0xeb1a, 0xe300),
1597 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1598 { USB_DEVICE(0xeb1a, 0xe303),
1599 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1600 { USB_DEVICE(0xeb1a, 0xe305),
1601 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1602 { USB_DEVICE(0xeb1a, 0xe310),
1603 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1604 { USB_DEVICE(0xeb1a, 0xa313),
1605 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1606 { USB_DEVICE(0xeb1a, 0xa316),
1607 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1608 { USB_DEVICE(0xeb1a, 0xe320),
1609 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1610 { USB_DEVICE(0xeb1a, 0xe323),
1611 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1612 { USB_DEVICE(0xeb1a, 0xe350),
1613 .driver_info = EM2870_BOARD_KWORLD_350U },
1614 { USB_DEVICE(0xeb1a, 0xe355),
1615 .driver_info = EM2870_BOARD_KWORLD_355U },
1616 { USB_DEVICE(0xeb1a, 0x2801),
1617 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1618 { USB_DEVICE(0xeb1a, 0xe357),
1619 .driver_info = EM2870_BOARD_KWORLD_355U },
1620 { USB_DEVICE(0x1b80, 0xe302),
1621 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1622 { USB_DEVICE(0x1b80, 0xe304),
1623 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
1624 { USB_DEVICE(0x0ccd, 0x0036),
1625 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1626 { USB_DEVICE(0x0ccd, 0x004c),
1627 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1628 { USB_DEVICE(0x0ccd, 0x004f),
1629 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1630 { USB_DEVICE(0x0ccd, 0x005e),
1631 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1632 { USB_DEVICE(0x0ccd, 0x0042),
1633 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1634 { USB_DEVICE(0x0ccd, 0x0043),
1635 .driver_info = EM2870_BOARD_TERRATEC_XS },
1636 { USB_DEVICE(0x0ccd, 0x0047),
1637 .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1638 { USB_DEVICE(0x0ccd, 0x0084),
1639 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1640 { USB_DEVICE(0x0ccd, 0x0096),
1641 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1642 { USB_DEVICE(0x185b, 0x2870),
1643 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1644 { USB_DEVICE(0x185b, 0x2041),
1645 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1646 { USB_DEVICE(0x2040, 0x4200),
1647 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1648 { USB_DEVICE(0x2040, 0x4201),
1649 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1650 { USB_DEVICE(0x2040, 0x6500),
1651 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1652 { USB_DEVICE(0x2040, 0x6502),
1653 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1654 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1655 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1656 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
1657 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1658 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
1659 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1660 { USB_DEVICE(0x2040, 0x651f),
1661 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1662 { USB_DEVICE(0x0438, 0xb002),
1663 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1664 { USB_DEVICE(0x2001, 0xf112),
1665 .driver_info = EM2820_BOARD_DLINK_USB_TV },
1666 { USB_DEVICE(0x2304, 0x0207),
1667 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1668 { USB_DEVICE(0x2304, 0x0208),
1669 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1670 { USB_DEVICE(0x2304, 0x021a),
1671 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1672 { USB_DEVICE(0x2304, 0x0226),
1673 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1674 { USB_DEVICE(0x2304, 0x0227),
1675 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1676 { USB_DEVICE(0x0413, 0x6023),
1677 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1678 { USB_DEVICE(0x093b, 0xa005),
1679 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1680 { USB_DEVICE(0x04bb, 0x0515),
1681 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1682 { USB_DEVICE(0xeb1a, 0x50a6),
1683 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
1684 { },
1685 };
1686 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1687
1688 /*
1689 * EEPROM hash table for devices with generic USB IDs
1690 */
1691 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1692 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1693 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1694 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1695 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1696 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1697 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
1698 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
1699 };
1700
1701 /* I2C devicelist hash table for devices with generic USB IDs */
1702 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1703 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1704 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1705 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
1706 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1707 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
1708 };
1709
1710 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1711 static unsigned short saa711x_addrs[] = {
1712 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
1713 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
1714 I2C_CLIENT_END };
1715
1716 static unsigned short tvp5150_addrs[] = {
1717 0xb8 >> 1,
1718 0xba >> 1,
1719 I2C_CLIENT_END
1720 };
1721
1722 static unsigned short mt9v011_addrs[] = {
1723 0xba >> 1,
1724 I2C_CLIENT_END
1725 };
1726
1727 static unsigned short msp3400_addrs[] = {
1728 0x80 >> 1,
1729 0x88 >> 1,
1730 I2C_CLIENT_END
1731 };
1732
1733 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1734 {
1735 int rc = 0;
1736 struct em28xx *dev = ptr;
1737
1738 if (dev->tuner_type != TUNER_XC2028)
1739 return 0;
1740
1741 if (command != XC2028_TUNER_RESET)
1742 return 0;
1743
1744 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1745
1746 return rc;
1747 }
1748 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1749
1750 static inline void em28xx_set_model(struct em28xx *dev)
1751 {
1752 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1753
1754 /* Those are the default values for the majority of boards
1755 Use those values if not specified otherwise at boards entry
1756 */
1757 if (!dev->board.xclk)
1758 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1759 EM28XX_XCLK_FREQUENCY_12MHZ;
1760
1761 if (!dev->board.i2c_speed)
1762 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1763 EM28XX_I2C_FREQ_100_KHZ;
1764 }
1765
1766
1767 /* FIXME: Should be replaced by a proper mt9m111 driver */
1768 static int em28xx_initialize_mt9m111(struct em28xx *dev)
1769 {
1770 int i;
1771 unsigned char regs[][3] = {
1772 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
1773 { 0x0d, 0x00, 0x00, },
1774 { 0x0a, 0x00, 0x21, },
1775 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
1776 };
1777
1778 for (i = 0; i < ARRAY_SIZE(regs); i++)
1779 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1780
1781 return 0;
1782 }
1783
1784
1785 /* FIXME: Should be replaced by a proper mt9m001 driver */
1786 static int em28xx_initialize_mt9m001(struct em28xx *dev)
1787 {
1788 int i;
1789 unsigned char regs[][3] = {
1790 { 0x0d, 0x00, 0x01, },
1791 { 0x0d, 0x00, 0x00, },
1792 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
1793 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
1794 { 0x20, 0x11, 0x00, },
1795 { 0x06, 0x00, 0x10, },
1796 { 0x2b, 0x00, 0x24, },
1797 { 0x2e, 0x00, 0x24, },
1798 { 0x35, 0x00, 0x24, },
1799 { 0x2d, 0x00, 0x20, },
1800 { 0x2c, 0x00, 0x20, },
1801 { 0x09, 0x0a, 0xd4, },
1802 { 0x35, 0x00, 0x57, },
1803 };
1804
1805 for (i = 0; i < ARRAY_SIZE(regs); i++)
1806 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1807
1808 return 0;
1809 }
1810
1811 /* HINT method: webcam I2C chips
1812 *
1813 * This method works for webcams with Micron sensors
1814 */
1815 static int em28xx_hint_sensor(struct em28xx *dev)
1816 {
1817 int rc;
1818 char *sensor_name;
1819 unsigned char cmd;
1820 __be16 version_be;
1821 u16 version;
1822
1823 /* Micron sensor detection */
1824 dev->i2c_client.addr = 0xba >> 1;
1825 cmd = 0;
1826 i2c_master_send(&dev->i2c_client, &cmd, 1);
1827 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
1828 if (rc != 2)
1829 return -EINVAL;
1830
1831 version = be16_to_cpu(version_be);
1832 switch (version) {
1833 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
1834 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
1835 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
1836 em28xx_set_model(dev);
1837
1838 sensor_name = "mt9v011";
1839 dev->em28xx_sensor = EM28XX_MT9V011;
1840 dev->sensor_xres = 640;
1841 dev->sensor_yres = 480;
1842 /*
1843 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
1844 * the Silvercrest cam I have here for testing - for higher
1845 * resolutions, a high clock cause horizontal artifacts, so we
1846 * need to use a lower xclk frequency.
1847 * Yet, it would be possible to adjust xclk depending on the
1848 * desired resolution, since this affects directly the
1849 * frame rate.
1850 */
1851 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
1852 dev->sensor_xtal = 4300000;
1853
1854 /* probably means GRGB 16 bit bayer */
1855 dev->vinmode = 0x0d;
1856 dev->vinctl = 0x00;
1857
1858 break;
1859
1860 case 0x143a: /* MT9M111 as found in the ECS G200 */
1861 dev->model = EM2750_BOARD_UNKNOWN;
1862 em28xx_set_model(dev);
1863
1864 sensor_name = "mt9m111";
1865 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
1866 dev->em28xx_sensor = EM28XX_MT9M111;
1867 em28xx_initialize_mt9m111(dev);
1868 dev->sensor_xres = 640;
1869 dev->sensor_yres = 512;
1870
1871 dev->vinmode = 0x0a;
1872 dev->vinctl = 0x00;
1873
1874 break;
1875
1876 case 0x8431:
1877 dev->model = EM2750_BOARD_UNKNOWN;
1878 em28xx_set_model(dev);
1879
1880 sensor_name = "mt9m001";
1881 dev->em28xx_sensor = EM28XX_MT9M001;
1882 em28xx_initialize_mt9m001(dev);
1883 dev->sensor_xres = 1280;
1884 dev->sensor_yres = 1024;
1885
1886 /* probably means BGGR 16 bit bayer */
1887 dev->vinmode = 0x0c;
1888 dev->vinctl = 0x00;
1889
1890 break;
1891 default:
1892 printk("Unknown Micron Sensor 0x%04x\n", version);
1893 return -EINVAL;
1894 }
1895
1896 /* Setup webcam defaults */
1897 em28xx_pre_card_setup(dev);
1898
1899 em28xx_errdev("Sensor is %s, using model %s entry.\n",
1900 sensor_name, em28xx_boards[dev->model].name);
1901
1902 return 0;
1903 }
1904
1905 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1906 * this won't work for boards with generic PCI IDs
1907 */
1908 void em28xx_pre_card_setup(struct em28xx *dev)
1909 {
1910 /* Set the initial XCLK and I2C clock values based on the board
1911 definition */
1912 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1913 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1914 msleep(50);
1915
1916 /* request some modules */
1917 switch (dev->model) {
1918 case EM2861_BOARD_PLEXTOR_PX_TV100U:
1919 /* Sets the msp34xx I2S speed */
1920 dev->i2s_speed = 2048000;
1921 break;
1922 case EM2861_BOARD_KWORLD_PVRTV_300U:
1923 case EM2880_BOARD_KWORLD_DVB_305U:
1924 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1925 msleep(10);
1926 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1927 msleep(10);
1928 break;
1929 case EM2870_BOARD_COMPRO_VIDEOMATE:
1930 /* TODO: someone can do some cleanup here...
1931 not everything's needed */
1932 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1933 msleep(10);
1934 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1935 msleep(10);
1936 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1937 mdelay(70);
1938 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1939 mdelay(70);
1940 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1941 mdelay(70);
1942 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1943 mdelay(70);
1944 break;
1945 case EM2870_BOARD_TERRATEC_XS_MT2060:
1946 /* this device needs some gpio writes to get the DVB-T
1947 demod work */
1948 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1949 mdelay(70);
1950 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1951 mdelay(70);
1952 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1953 mdelay(70);
1954 break;
1955 case EM2870_BOARD_PINNACLE_PCTV_DVB:
1956 /* this device needs some gpio writes to get the
1957 DVB-T demod work */
1958 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1959 mdelay(70);
1960 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1961 mdelay(70);
1962 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1963 mdelay(70);
1964 break;
1965 case EM2820_BOARD_GADMEI_UTV310:
1966 case EM2820_BOARD_MSI_VOX_USB_2:
1967 /* enables audio for that devices */
1968 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1969 break;
1970
1971 case EM2882_BOARD_KWORLD_ATSC_315U:
1972 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1973 msleep(10);
1974 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1975 msleep(10);
1976 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1977 msleep(10);
1978 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
1979 msleep(10);
1980 break;
1981
1982 case EM2860_BOARD_KAIOMY_TVNPC_U2:
1983 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
1984 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1985 em28xx_write_regs(dev, 0x0d, "\x42", 1);
1986 em28xx_write_regs(dev, 0x08, "\xfd", 1);
1987 msleep(10);
1988 em28xx_write_regs(dev, 0x08, "\xff", 1);
1989 msleep(10);
1990 em28xx_write_regs(dev, 0x08, "\x7f", 1);
1991 msleep(10);
1992 em28xx_write_regs(dev, 0x08, "\x6b", 1);
1993
1994 break;
1995 case EM2860_BOARD_EASYCAP:
1996 em28xx_write_regs(dev, 0x08, "\xf8", 1);
1997 break;
1998
1999 case EM2820_BOARD_IODATA_GVMVP_SZ:
2000 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2001 msleep(70);
2002 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2003 msleep(10);
2004 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2005 msleep(70);
2006 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2007 msleep(70);
2008 break;
2009 }
2010
2011 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2012 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2013
2014 /* Unlock device */
2015 em28xx_set_mode(dev, EM28XX_SUSPEND);
2016 }
2017
2018 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2019 {
2020 memset(ctl, 0, sizeof(*ctl));
2021
2022 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2023 ctl->max_len = 64;
2024 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2025
2026 switch (dev->model) {
2027 case EM2880_BOARD_EMPIRE_DUAL_TV:
2028 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2029 ctl->demod = XC3028_FE_ZARLINK456;
2030 break;
2031 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2032 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2033 ctl->demod = XC3028_FE_ZARLINK456;
2034 break;
2035 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2036 /* djh - Not sure which demod we need here */
2037 ctl->demod = XC3028_FE_DEFAULT;
2038 break;
2039 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2040 ctl->demod = XC3028_FE_DEFAULT;
2041 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2042 break;
2043 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2044 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2045 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2046 /* FIXME: Better to specify the needed IF */
2047 ctl->demod = XC3028_FE_DEFAULT;
2048 break;
2049 case EM2883_BOARD_KWORLD_HYBRID_330U:
2050 ctl->demod = XC3028_FE_CHINA;
2051 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2052 break;
2053 case EM2882_BOARD_EVGA_INDTUBE:
2054 ctl->demod = XC3028_FE_CHINA;
2055 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2056 break;
2057 default:
2058 ctl->demod = XC3028_FE_OREN538;
2059 }
2060 }
2061
2062 static void em28xx_tuner_setup(struct em28xx *dev)
2063 {
2064 struct tuner_setup tun_setup;
2065 struct v4l2_frequency f;
2066
2067 if (dev->tuner_type == TUNER_ABSENT)
2068 return;
2069
2070 memset(&tun_setup, 0, sizeof(tun_setup));
2071
2072 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2073 tun_setup.tuner_callback = em28xx_tuner_callback;
2074
2075 if (dev->board.radio.type) {
2076 tun_setup.type = dev->board.radio.type;
2077 tun_setup.addr = dev->board.radio_addr;
2078
2079 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2080 }
2081
2082 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2083 tun_setup.type = dev->tuner_type;
2084 tun_setup.addr = dev->tuner_addr;
2085
2086 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2087 }
2088
2089 if (dev->tda9887_conf) {
2090 struct v4l2_priv_tun_config tda9887_cfg;
2091
2092 tda9887_cfg.tuner = TUNER_TDA9887;
2093 tda9887_cfg.priv = &dev->tda9887_conf;
2094
2095 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2096 }
2097
2098 if (dev->tuner_type == TUNER_XC2028) {
2099 struct v4l2_priv_tun_config xc2028_cfg;
2100 struct xc2028_ctrl ctl;
2101
2102 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2103 memset(&ctl, 0, sizeof(ctl));
2104
2105 em28xx_setup_xc3028(dev, &ctl);
2106
2107 xc2028_cfg.tuner = TUNER_XC2028;
2108 xc2028_cfg.priv = &ctl;
2109
2110 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2111 }
2112
2113 /* configure tuner */
2114 f.tuner = 0;
2115 f.type = V4L2_TUNER_ANALOG_TV;
2116 f.frequency = 9076; /* just a magic number */
2117 dev->ctl_freq = f.frequency;
2118 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2119 }
2120
2121 static int em28xx_hint_board(struct em28xx *dev)
2122 {
2123 int i;
2124
2125 /* HINT method: EEPROM
2126 *
2127 * This method works only for boards with eeprom.
2128 * Uses a hash of all eeprom bytes. The hash should be
2129 * unique for a vendor/tuner pair.
2130 * There are a high chance that tuners for different
2131 * video standards produce different hashes.
2132 */
2133 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2134 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2135 dev->model = em28xx_eeprom_hash[i].model;
2136 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2137
2138 em28xx_errdev("Your board has no unique USB ID.\n");
2139 em28xx_errdev("A hint were successfully done, "
2140 "based on eeprom hash.\n");
2141 em28xx_errdev("This method is not 100%% failproof.\n");
2142 em28xx_errdev("If the board were missdetected, "
2143 "please email this log to:\n");
2144 em28xx_errdev("\tV4L Mailing List "
2145 " <linux-media@vger.kernel.org>\n");
2146 em28xx_errdev("Board detected as %s\n",
2147 em28xx_boards[dev->model].name);
2148
2149 return 0;
2150 }
2151 }
2152
2153 /* HINT method: I2C attached devices
2154 *
2155 * This method works for all boards.
2156 * Uses a hash of i2c scanned devices.
2157 * Devices with the same i2c attached chips will
2158 * be considered equal.
2159 * This method is less precise than the eeprom one.
2160 */
2161
2162 /* user did not request i2c scanning => do it now */
2163 if (!dev->i2c_hash)
2164 em28xx_do_i2c_scan(dev);
2165
2166 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2167 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2168 dev->model = em28xx_i2c_hash[i].model;
2169 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2170 em28xx_errdev("Your board has no unique USB ID.\n");
2171 em28xx_errdev("A hint were successfully done, "
2172 "based on i2c devicelist hash.\n");
2173 em28xx_errdev("This method is not 100%% failproof.\n");
2174 em28xx_errdev("If the board were missdetected, "
2175 "please email this log to:\n");
2176 em28xx_errdev("\tV4L Mailing List "
2177 " <linux-media@vger.kernel.org>\n");
2178 em28xx_errdev("Board detected as %s\n",
2179 em28xx_boards[dev->model].name);
2180
2181 return 0;
2182 }
2183 }
2184
2185 em28xx_errdev("Your board has no unique USB ID and thus need a "
2186 "hint to be detected.\n");
2187 em28xx_errdev("You may try to use card=<n> insmod option to "
2188 "workaround that.\n");
2189 em28xx_errdev("Please send an email with this log to:\n");
2190 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2191 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2192 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2193
2194 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2195 " insmod option:\n");
2196 for (i = 0; i < em28xx_bcount; i++) {
2197 em28xx_errdev(" card=%d -> %s\n",
2198 i, em28xx_boards[i].name);
2199 }
2200 return -1;
2201 }
2202
2203 /* ----------------------------------------------------------------------- */
2204 void em28xx_register_i2c_ir(struct em28xx *dev)
2205 {
2206 const unsigned short addr_list[] = {
2207 0x30, 0x47, I2C_CLIENT_END
2208 };
2209
2210 if (disable_ir)
2211 return;
2212
2213 memset(&dev->info, 0, sizeof(&dev->info));
2214 memset(&dev->init_data, 0, sizeof(dev->init_data));
2215 strlcpy(dev->info.type, "ir_video", I2C_NAME_SIZE);
2216
2217 /* detect & configure */
2218 switch (dev->model) {
2219 case EM2800_BOARD_TERRATEC_CINERGY_200:
2220 case EM2820_BOARD_TERRATEC_CINERGY_250:
2221 dev->init_data.ir_codes = &ir_codes_em_terratec_table;
2222 dev->init_data.get_key = em28xx_get_key_terratec;
2223 dev->init_data.name = "i2c IR (EM28XX Terratec)";
2224 break;
2225 case EM2820_BOARD_PINNACLE_USB_2:
2226 dev->init_data.ir_codes = &ir_codes_pinnacle_grey_table;
2227 dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2228 dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2229 break;
2230 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2231 dev->init_data.ir_codes = &ir_codes_hauppauge_new_table;
2232 dev->init_data.get_key = em28xx_get_key_em_haup;
2233 dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
2234 break;
2235 }
2236
2237 if (dev->init_data.name)
2238 dev->info.platform_data = &dev->init_data;
2239 i2c_new_probed_device(&dev->i2c_adap, &dev->info, addr_list);
2240 }
2241
2242 void em28xx_card_setup(struct em28xx *dev)
2243 {
2244 /*
2245 * If the device can be a webcam, seek for a sensor.
2246 * If sensor is not found, then it isn't a webcam.
2247 */
2248 if (dev->board.is_webcam) {
2249 if (em28xx_hint_sensor(dev) < 0)
2250 dev->board.is_webcam = 0;
2251 else
2252 dev->progressive = 1;
2253 } else
2254 em28xx_set_model(dev);
2255
2256 em28xx_info("Identified as %s (card=%d)\n",
2257 dev->board.name, dev->model);
2258
2259 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2260 if (em28xx_boards[dev->model].tuner_addr)
2261 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2262
2263 if (em28xx_boards[dev->model].tda9887_conf)
2264 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2265
2266 /* request some modules */
2267 switch (dev->model) {
2268 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2269 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2270 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2271 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2272 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2273 {
2274 struct tveeprom tv;
2275 #if defined(CONFIG_MODULES) && defined(MODULE)
2276 request_module("tveeprom");
2277 #endif
2278 /* Call first TVeeprom */
2279
2280 dev->i2c_client.addr = 0xa0 >> 1;
2281 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2282
2283 dev->tuner_type = tv.tuner_type;
2284
2285 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2286 dev->i2s_speed = 2048000;
2287 dev->board.has_msp34xx = 1;
2288 }
2289 break;
2290 }
2291 case EM2882_BOARD_KWORLD_ATSC_315U:
2292 em28xx_write_reg(dev, 0x0d, 0x42);
2293 msleep(10);
2294 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2295 msleep(10);
2296 break;
2297 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2298 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2299 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2300 break;
2301 case EM2820_BOARD_UNKNOWN:
2302 case EM2800_BOARD_UNKNOWN:
2303 /*
2304 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2305 *
2306 * This occurs because they share identical USB vendor and
2307 * product IDs.
2308 *
2309 * What we do here is look up the EEPROM hash of the K-WORLD
2310 * and if it is found then we decide that we do not have
2311 * a DIGIVOX and reset the device to the K-WORLD instead.
2312 *
2313 * This solution is only valid if they do not share eeprom
2314 * hash identities which has not been determined as yet.
2315 */
2316 case EM2880_BOARD_MSI_DIGIVOX_AD:
2317 if (!em28xx_hint_board(dev))
2318 em28xx_set_model(dev);
2319
2320 /* In cases where we had to use a board hint, the call to
2321 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2322 so make the call now so the analog GPIOs are set properly
2323 before probing the i2c bus. */
2324 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2325 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2326 break;
2327 }
2328
2329 #if defined(CONFIG_MODULES) && defined(MODULE)
2330 if (dev->board.has_ir_i2c && !disable_ir)
2331 request_module("ir-kbd-i2c");
2332 #endif
2333 if (dev->board.has_snapshot_button)
2334 em28xx_register_snapshot_button(dev);
2335
2336 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2337 em28xx_errdev("\n\n");
2338 em28xx_errdev("The support for this board weren't "
2339 "valid yet.\n");
2340 em28xx_errdev("Please send a report of having this working\n");
2341 em28xx_errdev("not to V4L mailing list (and/or to other "
2342 "addresses)\n\n");
2343 }
2344
2345 /* Allow override tuner type by a module parameter */
2346 if (tuner >= 0)
2347 dev->tuner_type = tuner;
2348
2349 /* request some modules */
2350 if (dev->board.has_msp34xx)
2351 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2352 "msp3400", "msp3400", msp3400_addrs);
2353
2354 if (dev->board.decoder == EM28XX_SAA711X)
2355 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2356 "saa7115", "saa7115_auto", saa711x_addrs);
2357
2358 if (dev->board.decoder == EM28XX_TVP5150)
2359 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2360 "tvp5150", "tvp5150", tvp5150_addrs);
2361
2362 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2363 struct v4l2_subdev *sd;
2364
2365 sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2366 &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
2367 v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
2368 }
2369
2370
2371 if (dev->board.adecoder == EM28XX_TVAUDIO)
2372 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2373 "tvaudio", "tvaudio", dev->board.tvaudio_addr);
2374
2375 if (dev->board.tuner_type != TUNER_ABSENT) {
2376 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2377
2378 if (dev->board.radio.type)
2379 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2380 "tuner", "tuner", dev->board.radio_addr);
2381
2382 if (has_demod)
2383 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2384 &dev->i2c_adap, "tuner", "tuner",
2385 v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2386 if (dev->tuner_addr == 0) {
2387 enum v4l2_i2c_tuner_type type =
2388 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2389 struct v4l2_subdev *sd;
2390
2391 sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2392 &dev->i2c_adap, "tuner", "tuner",
2393 v4l2_i2c_tuner_addrs(type));
2394
2395 if (sd)
2396 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2397 } else {
2398 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2399 "tuner", "tuner", dev->tuner_addr);
2400 }
2401 }
2402
2403 em28xx_tuner_setup(dev);
2404
2405 if(!disable_ir)
2406 em28xx_ir_init(dev);
2407 }
2408
2409
2410 #if defined(CONFIG_MODULES) && defined(MODULE)
2411 static void request_module_async(struct work_struct *work)
2412 {
2413 struct em28xx *dev = container_of(work,
2414 struct em28xx, request_module_wk);
2415
2416 if (dev->has_audio_class)
2417 request_module("snd-usb-audio");
2418 else if (dev->has_alsa_audio)
2419 request_module("em28xx-alsa");
2420
2421 if (dev->board.has_dvb)
2422 request_module("em28xx-dvb");
2423 }
2424
2425 static void request_modules(struct em28xx *dev)
2426 {
2427 INIT_WORK(&dev->request_module_wk, request_module_async);
2428 schedule_work(&dev->request_module_wk);
2429 }
2430 #else
2431 #define request_modules(dev)
2432 #endif /* CONFIG_MODULES */
2433
2434 /*
2435 * em28xx_realease_resources()
2436 * unregisters the v4l2,i2c and usb devices
2437 * called when the device gets disconected or at module unload
2438 */
2439 void em28xx_release_resources(struct em28xx *dev)
2440 {
2441 if (dev->sbutton_input_dev)
2442 em28xx_deregister_snapshot_button(dev);
2443
2444 if (dev->ir)
2445 em28xx_ir_fini(dev);
2446
2447 /*FIXME: I2C IR should be disconnected */
2448
2449 em28xx_release_analog_resources(dev);
2450
2451 em28xx_remove_from_devlist(dev);
2452
2453 em28xx_i2c_unregister(dev);
2454
2455 v4l2_device_unregister(&dev->v4l2_dev);
2456
2457 usb_put_dev(dev->udev);
2458
2459 /* Mark device as unused */
2460 em28xx_devused &= ~(1 << dev->devno);
2461 };
2462
2463 /*
2464 * em28xx_init_dev()
2465 * allocates and inits the device structs, registers i2c bus and v4l device
2466 */
2467 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2468 struct usb_interface *interface,
2469 int minor)
2470 {
2471 struct em28xx *dev = *devhandle;
2472 int retval;
2473 int errCode;
2474
2475 dev->udev = udev;
2476 mutex_init(&dev->ctrl_urb_lock);
2477 spin_lock_init(&dev->slock);
2478 init_waitqueue_head(&dev->open);
2479 init_waitqueue_head(&dev->wait_frame);
2480 init_waitqueue_head(&dev->wait_stream);
2481
2482 dev->em28xx_write_regs = em28xx_write_regs;
2483 dev->em28xx_read_reg = em28xx_read_reg;
2484 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2485 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2486 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2487 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2488
2489 em28xx_set_model(dev);
2490
2491 /* Set the default GPO/GPIO for legacy devices */
2492 dev->reg_gpo_num = EM2880_R04_GPO;
2493 dev->reg_gpio_num = EM28XX_R08_GPIO;
2494
2495 dev->wait_after_write = 5;
2496
2497 /* Based on the Chip ID, set the device configuration */
2498 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2499 if (retval > 0) {
2500 dev->chip_id = retval;
2501
2502 switch (dev->chip_id) {
2503 case CHIP_ID_EM2710:
2504 em28xx_info("chip ID is em2710\n");
2505 break;
2506 case CHIP_ID_EM2750:
2507 em28xx_info("chip ID is em2750\n");
2508 break;
2509 case CHIP_ID_EM2820:
2510 em28xx_info("chip ID is em2820 (or em2710)\n");
2511 break;
2512 case CHIP_ID_EM2840:
2513 em28xx_info("chip ID is em2840\n");
2514 break;
2515 case CHIP_ID_EM2860:
2516 em28xx_info("chip ID is em2860\n");
2517 break;
2518 case CHIP_ID_EM2870:
2519 em28xx_info("chip ID is em2870\n");
2520 dev->wait_after_write = 0;
2521 break;
2522 case CHIP_ID_EM2874:
2523 em28xx_info("chip ID is em2874\n");
2524 dev->reg_gpio_num = EM2874_R80_GPIO;
2525 dev->wait_after_write = 0;
2526 break;
2527 case CHIP_ID_EM2883:
2528 em28xx_info("chip ID is em2882/em2883\n");
2529 dev->wait_after_write = 0;
2530 break;
2531 default:
2532 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
2533 }
2534 }
2535
2536 /* Prepopulate cached GPO register content */
2537 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
2538 if (retval >= 0)
2539 dev->reg_gpo = retval;
2540
2541 em28xx_pre_card_setup(dev);
2542
2543 if (!dev->board.is_em2800) {
2544 /* Sets I2C speed to 100 KHz */
2545 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
2546 if (retval < 0) {
2547 em28xx_errdev("%s: em28xx_write_regs_req failed!"
2548 " retval [%d]\n",
2549 __func__, retval);
2550 return retval;
2551 }
2552 }
2553
2554 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2555 if (retval < 0) {
2556 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2557 return retval;
2558 }
2559
2560 /* register i2c bus */
2561 errCode = em28xx_i2c_register(dev);
2562 if (errCode < 0) {
2563 v4l2_device_unregister(&dev->v4l2_dev);
2564 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2565 __func__, errCode);
2566 return errCode;
2567 }
2568
2569 /*
2570 * Default format, used for tvp5150 or saa711x output formats
2571 */
2572 dev->vinmode = 0x10;
2573 dev->vinctl = 0x11;
2574
2575 /* Do board specific init and eeprom reading */
2576 em28xx_card_setup(dev);
2577
2578 /* Configure audio */
2579 errCode = em28xx_audio_setup(dev);
2580 if (errCode < 0) {
2581 v4l2_device_unregister(&dev->v4l2_dev);
2582 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2583 __func__, errCode);
2584 }
2585
2586 /* wake i2c devices */
2587 em28xx_wake_i2c(dev);
2588
2589 /* init video dma queues */
2590 INIT_LIST_HEAD(&dev->vidq.active);
2591 INIT_LIST_HEAD(&dev->vidq.queued);
2592
2593
2594 if (dev->board.has_msp34xx) {
2595 /* Send a reset to other chips via gpio */
2596 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2597 if (errCode < 0) {
2598 em28xx_errdev("%s: em28xx_write_regs_req - "
2599 "msp34xx(1) failed! errCode [%d]\n",
2600 __func__, errCode);
2601 return errCode;
2602 }
2603 msleep(3);
2604
2605 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2606 if (errCode < 0) {
2607 em28xx_errdev("%s: em28xx_write_regs_req - "
2608 "msp34xx(2) failed! errCode [%d]\n",
2609 __func__, errCode);
2610 return errCode;
2611 }
2612 msleep(3);
2613 }
2614
2615 em28xx_add_into_devlist(dev);
2616
2617 retval = em28xx_register_analog_devices(dev);
2618 if (retval < 0) {
2619 em28xx_release_resources(dev);
2620 goto fail_reg_devices;
2621 }
2622
2623 em28xx_init_extension(dev);
2624
2625 /* Save some power by putting tuner to sleep */
2626 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
2627
2628 return 0;
2629
2630 fail_reg_devices:
2631 return retval;
2632 }
2633
2634 /*
2635 * em28xx_usb_probe()
2636 * checks for supported devices
2637 */
2638 static int em28xx_usb_probe(struct usb_interface *interface,
2639 const struct usb_device_id *id)
2640 {
2641 const struct usb_endpoint_descriptor *endpoint;
2642 struct usb_device *udev;
2643 struct usb_interface *uif;
2644 struct em28xx *dev = NULL;
2645 int retval;
2646 int i, nr, ifnum, isoc_pipe;
2647 char *speed;
2648 char descr[255] = "";
2649
2650 udev = usb_get_dev(interface_to_usbdev(interface));
2651 ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2652
2653 /* Check to see next free device and mark as used */
2654 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2655 em28xx_devused |= 1<<nr;
2656
2657 /* Don't register audio interfaces */
2658 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2659 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2660 "interface %i, class %i\n",
2661 le16_to_cpu(udev->descriptor.idVendor),
2662 le16_to_cpu(udev->descriptor.idProduct),
2663 ifnum,
2664 interface->altsetting[0].desc.bInterfaceClass);
2665
2666 em28xx_devused &= ~(1<<nr);
2667 retval = -ENODEV;
2668 goto err;
2669 }
2670
2671 endpoint = &interface->cur_altsetting->endpoint[0].desc;
2672
2673 /* check if the device has the iso in endpoint at the correct place */
2674 if (usb_endpoint_xfer_isoc(endpoint)
2675 &&
2676 (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2677 /* It's a newer em2874/em2875 device */
2678 isoc_pipe = 0;
2679 } else {
2680 int check_interface = 1;
2681 isoc_pipe = 1;
2682 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2683 if (!usb_endpoint_xfer_isoc(endpoint))
2684 check_interface = 0;
2685
2686 if (usb_endpoint_dir_out(endpoint))
2687 check_interface = 0;
2688
2689 if (!check_interface) {
2690 em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2691 "interface %i, class %i found.\n",
2692 le16_to_cpu(udev->descriptor.idVendor),
2693 le16_to_cpu(udev->descriptor.idProduct),
2694 ifnum,
2695 interface->altsetting[0].desc.bInterfaceClass);
2696
2697 em28xx_err(DRIVER_NAME " This is an anciliary "
2698 "interface not used by the driver\n");
2699
2700 em28xx_devused &= ~(1<<nr);
2701 retval = -ENODEV;
2702 goto err;
2703 }
2704 }
2705
2706 switch (udev->speed) {
2707 case USB_SPEED_LOW:
2708 speed = "1.5";
2709 break;
2710 case USB_SPEED_UNKNOWN:
2711 case USB_SPEED_FULL:
2712 speed = "12";
2713 break;
2714 case USB_SPEED_HIGH:
2715 speed = "480";
2716 break;
2717 default:
2718 speed = "unknown";
2719 }
2720
2721 if (udev->manufacturer)
2722 strlcpy(descr, udev->manufacturer, sizeof(descr));
2723
2724 if (udev->product) {
2725 if (*descr)
2726 strlcat(descr, " ", sizeof(descr));
2727 strlcat(descr, udev->product, sizeof(descr));
2728 }
2729 if (*descr)
2730 strlcat(descr, " ", sizeof(descr));
2731
2732 printk(DRIVER_NAME ": New device %s@ %s Mbps "
2733 "(%04x:%04x, interface %d, class %d)\n",
2734 descr,
2735 speed,
2736 le16_to_cpu(udev->descriptor.idVendor),
2737 le16_to_cpu(udev->descriptor.idProduct),
2738 ifnum,
2739 interface->altsetting->desc.bInterfaceNumber);
2740
2741 /*
2742 * Make sure we have 480 Mbps of bandwidth, otherwise things like
2743 * video stream wouldn't likely work, since 12 Mbps is generally
2744 * not enough even for most Digital TV streams.
2745 */
2746 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
2747 printk(DRIVER_NAME ": Device initialization failed.\n");
2748 printk(DRIVER_NAME ": Device must be connected to a high-speed"
2749 " USB 2.0 port.\n");
2750 em28xx_devused &= ~(1<<nr);
2751 retval = -ENODEV;
2752 goto err;
2753 }
2754
2755 if (nr >= EM28XX_MAXBOARDS) {
2756 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
2757 EM28XX_MAXBOARDS);
2758 em28xx_devused &= ~(1<<nr);
2759 retval = -ENOMEM;
2760 goto err;
2761 }
2762
2763 /* allocate memory for our device state and initialize it */
2764 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
2765 if (dev == NULL) {
2766 em28xx_err(DRIVER_NAME ": out of memory!\n");
2767 em28xx_devused &= ~(1<<nr);
2768 retval = -ENOMEM;
2769 goto err;
2770 }
2771
2772 snprintf(dev->name, 29, "em28xx #%d", nr);
2773 dev->devno = nr;
2774 dev->model = id->driver_info;
2775 dev->alt = -1;
2776
2777 /* Checks if audio is provided by some interface */
2778 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
2779 uif = udev->config->interface[i];
2780 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2781 dev->has_audio_class = 1;
2782 break;
2783 }
2784 }
2785
2786 /* compute alternate max packet sizes */
2787 uif = udev->actconfig->interface[0];
2788
2789 dev->num_alt = uif->num_altsetting;
2790 dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
2791
2792 if (dev->alt_max_pkt_size == NULL) {
2793 em28xx_errdev("out of memory!\n");
2794 em28xx_devused &= ~(1<<nr);
2795 kfree(dev);
2796 retval = -ENOMEM;
2797 goto err;
2798 }
2799
2800 for (i = 0; i < dev->num_alt ; i++) {
2801 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
2802 dev->alt_max_pkt_size[i] =
2803 (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
2804 }
2805
2806 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
2807 dev->model = card[nr];
2808
2809 /* allocate device struct */
2810 mutex_init(&dev->lock);
2811 mutex_lock(&dev->lock);
2812 retval = em28xx_init_dev(&dev, udev, interface, nr);
2813 if (retval) {
2814 em28xx_devused &= ~(1<<dev->devno);
2815 mutex_unlock(&dev->lock);
2816 kfree(dev);
2817 goto err;
2818 }
2819
2820 /* save our data pointer in this interface device */
2821 usb_set_intfdata(interface, dev);
2822
2823 request_modules(dev);
2824
2825 /* Should be the last thing to do, to avoid newer udev's to
2826 open the device before fully initializing it
2827 */
2828 mutex_unlock(&dev->lock);
2829
2830 return 0;
2831
2832 err:
2833 return retval;
2834 }
2835
2836 /*
2837 * em28xx_usb_disconnect()
2838 * called when the device gets diconencted
2839 * video device will be unregistered on v4l2_close in case it is still open
2840 */
2841 static void em28xx_usb_disconnect(struct usb_interface *interface)
2842 {
2843 struct em28xx *dev;
2844
2845 dev = usb_get_intfdata(interface);
2846 usb_set_intfdata(interface, NULL);
2847
2848 if (!dev)
2849 return;
2850
2851 em28xx_info("disconnecting %s\n", dev->vdev->name);
2852
2853 /* wait until all current v4l2 io is finished then deallocate
2854 resources */
2855 mutex_lock(&dev->lock);
2856
2857 wake_up_interruptible_all(&dev->open);
2858
2859 v4l2_device_disconnect(&dev->v4l2_dev);
2860
2861 if (dev->users) {
2862 em28xx_warn
2863 ("device /dev/video%d is open! Deregistration and memory "
2864 "deallocation are deferred on close.\n",
2865 dev->vdev->num);
2866
2867 dev->state |= DEV_MISCONFIGURED;
2868 em28xx_uninit_isoc(dev);
2869 dev->state |= DEV_DISCONNECTED;
2870 wake_up_interruptible(&dev->wait_frame);
2871 wake_up_interruptible(&dev->wait_stream);
2872 } else {
2873 dev->state |= DEV_DISCONNECTED;
2874 em28xx_release_resources(dev);
2875 }
2876
2877 em28xx_close_extension(dev);
2878
2879 mutex_unlock(&dev->lock);
2880
2881 if (!dev->users) {
2882 kfree(dev->alt_max_pkt_size);
2883 kfree(dev);
2884 }
2885 }
2886
2887 static struct usb_driver em28xx_usb_driver = {
2888 .name = "em28xx",
2889 .probe = em28xx_usb_probe,
2890 .disconnect = em28xx_usb_disconnect,
2891 .id_table = em28xx_id_table,
2892 };
2893
2894 static int __init em28xx_module_init(void)
2895 {
2896 int result;
2897
2898 /* register this driver with the USB subsystem */
2899 result = usb_register(&em28xx_usb_driver);
2900 if (result)
2901 em28xx_err(DRIVER_NAME
2902 " usb_register failed. Error number %d.\n", result);
2903
2904 printk(KERN_INFO DRIVER_NAME " driver loaded\n");
2905
2906 return result;
2907 }
2908
2909 static void __exit em28xx_module_exit(void)
2910 {
2911 /* deregister this driver with the USB subsystem */
2912 usb_deregister(&em28xx_usb_driver);
2913 }
2914
2915 module_init(em28xx_module_init);
2916 module_exit(em28xx_module_exit);
Linux with added FPC-III support