KVM: arm64: Fix order of vcpu_write_sys_reg() arguments
[linux/fpc-iii.git] / drivers / fpga / xilinx-spi.c
blob9b62a4c2a3df6a0b9968f50f5a30d4cb39446399
1 /*
2 * Xilinx Spartan6 Slave Serial SPI Driver
4 * Copyright (C) 2017 DENX Software Engineering
6 * Anatolij Gustschin <agust@denx.de>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms and conditions of the GNU General Public License,
10 * version 2, as published by the Free Software Foundation.
12 * Manage Xilinx FPGA firmware that is loaded over SPI using
13 * the slave serial configuration interface.
16 #include <linux/delay.h>
17 #include <linux/device.h>
18 #include <linux/fpga/fpga-mgr.h>
19 #include <linux/gpio/consumer.h>
20 #include <linux/module.h>
21 #include <linux/mod_devicetable.h>
22 #include <linux/of.h>
23 #include <linux/spi/spi.h>
24 #include <linux/sizes.h>
26 struct xilinx_spi_conf {
27 struct spi_device *spi;
28 struct gpio_desc *prog_b;
29 struct gpio_desc *done;
32 static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr)
34 struct xilinx_spi_conf *conf = mgr->priv;
36 if (!gpiod_get_value(conf->done))
37 return FPGA_MGR_STATE_RESET;
39 return FPGA_MGR_STATE_UNKNOWN;
42 static int xilinx_spi_write_init(struct fpga_manager *mgr,
43 struct fpga_image_info *info,
44 const char *buf, size_t count)
46 struct xilinx_spi_conf *conf = mgr->priv;
47 const size_t prog_latency_7500us = 7500;
48 const size_t prog_pulse_1us = 1;
50 if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
51 dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
52 return -EINVAL;
55 gpiod_set_value(conf->prog_b, 1);
57 udelay(prog_pulse_1us); /* min is 500 ns */
59 gpiod_set_value(conf->prog_b, 0);
61 if (gpiod_get_value(conf->done)) {
62 dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
63 return -EIO;
66 /* program latency */
67 usleep_range(prog_latency_7500us, prog_latency_7500us + 100);
68 return 0;
71 static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
72 size_t count)
74 struct xilinx_spi_conf *conf = mgr->priv;
75 const char *fw_data = buf;
76 const char *fw_data_end = fw_data + count;
78 while (fw_data < fw_data_end) {
79 size_t remaining, stride;
80 int ret;
82 remaining = fw_data_end - fw_data;
83 stride = min_t(size_t, remaining, SZ_4K);
85 ret = spi_write(conf->spi, fw_data, stride);
86 if (ret) {
87 dev_err(&mgr->dev, "SPI error in firmware write: %d\n",
88 ret);
89 return ret;
91 fw_data += stride;
94 return 0;
97 static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf)
99 struct spi_device *spi = conf->spi;
100 const u8 din_data[1] = { 0xff };
101 int ret;
103 ret = spi_write(conf->spi, din_data, sizeof(din_data));
104 if (ret)
105 dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret);
107 return ret;
110 static int xilinx_spi_write_complete(struct fpga_manager *mgr,
111 struct fpga_image_info *info)
113 struct xilinx_spi_conf *conf = mgr->priv;
114 unsigned long timeout;
115 int ret;
117 if (gpiod_get_value(conf->done))
118 return xilinx_spi_apply_cclk_cycles(conf);
120 timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
122 while (time_before(jiffies, timeout)) {
124 ret = xilinx_spi_apply_cclk_cycles(conf);
125 if (ret)
126 return ret;
128 if (gpiod_get_value(conf->done))
129 return xilinx_spi_apply_cclk_cycles(conf);
132 dev_err(&mgr->dev, "Timeout after config data transfer.\n");
133 return -ETIMEDOUT;
136 static const struct fpga_manager_ops xilinx_spi_ops = {
137 .state = xilinx_spi_state,
138 .write_init = xilinx_spi_write_init,
139 .write = xilinx_spi_write,
140 .write_complete = xilinx_spi_write_complete,
143 static int xilinx_spi_probe(struct spi_device *spi)
145 struct xilinx_spi_conf *conf;
147 conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
148 if (!conf)
149 return -ENOMEM;
151 conf->spi = spi;
153 /* PROGRAM_B is active low */
154 conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW);
155 if (IS_ERR(conf->prog_b)) {
156 dev_err(&spi->dev, "Failed to get PROGRAM_B gpio: %ld\n",
157 PTR_ERR(conf->prog_b));
158 return PTR_ERR(conf->prog_b);
161 conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
162 if (IS_ERR(conf->done)) {
163 dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n",
164 PTR_ERR(conf->done));
165 return PTR_ERR(conf->done);
168 return fpga_mgr_register(&spi->dev, "Xilinx Slave Serial FPGA Manager",
169 &xilinx_spi_ops, conf);
172 static int xilinx_spi_remove(struct spi_device *spi)
174 fpga_mgr_unregister(&spi->dev);
176 return 0;
179 static const struct of_device_id xlnx_spi_of_match[] = {
180 { .compatible = "xlnx,fpga-slave-serial", },
183 MODULE_DEVICE_TABLE(of, xlnx_spi_of_match);
185 static struct spi_driver xilinx_slave_spi_driver = {
186 .driver = {
187 .name = "xlnx-slave-spi",
188 .of_match_table = of_match_ptr(xlnx_spi_of_match),
190 .probe = xilinx_spi_probe,
191 .remove = xilinx_spi_remove,
194 module_spi_driver(xilinx_slave_spi_driver)
196 MODULE_LICENSE("GPL v2");
197 MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
198 MODULE_DESCRIPTION("Load Xilinx FPGA firmware over SPI");