2 * dvb_ca.c: generic DVB functions for EN50221 CAM interfaces
4 * Copyright (C) 2004 Andrew de Quincey
6 * Parts of this file were based on sources as follows:
8 * Copyright (C) 2003 Ralph Metzler <rjkm@metzlerbros.de>
12 * Copyright (C) 1999-2002 Ralph Metzler
13 * & Marcus Metzler for convergence integrated media GmbH
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version 2
18 * of the License, or (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 * To obtain the license, point your browser to
25 * http://www.gnu.org/copyleft/gpl.html
28 #define pr_fmt(fmt) "dvb_ca_en50221: " fmt
30 #include <linux/errno.h>
31 #include <linux/slab.h>
32 #include <linux/list.h>
33 #include <linux/module.h>
34 #include <linux/vmalloc.h>
35 #include <linux/delay.h>
36 #include <linux/spinlock.h>
37 #include <linux/sched/signal.h>
38 #include <linux/kthread.h>
40 #include <media/dvb_ca_en50221.h>
41 #include <media/dvb_ringbuffer.h>
43 static int dvb_ca_en50221_debug
;
45 module_param_named(cam_debug
, dvb_ca_en50221_debug
, int, 0644);
46 MODULE_PARM_DESC(cam_debug
, "enable verbose debug messages");
48 #define dprintk(fmt, arg...) do { \
49 if (dvb_ca_en50221_debug) \
50 printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg);\
53 #define INIT_TIMEOUT_SECS 10
55 #define HOST_LINK_BUF_SIZE 0x200
57 #define RX_BUFFER_SIZE 65535
59 #define MAX_RX_PACKETS_PER_ITERATION 10
62 #define CTRLIF_COMMAND 1
63 #define CTRLIF_STATUS 1
64 #define CTRLIF_SIZE_LOW 2
65 #define CTRLIF_SIZE_HIGH 3
67 #define CMDREG_HC 1 /* Host control */
68 #define CMDREG_SW 2 /* Size write */
69 #define CMDREG_SR 4 /* Size read */
70 #define CMDREG_RS 8 /* Reset interface */
71 #define CMDREG_FRIE 0x40 /* Enable FR interrupt */
72 #define CMDREG_DAIE 0x80 /* Enable DA interrupt */
73 #define IRQEN (CMDREG_DAIE)
75 #define STATUSREG_RE 1 /* read error */
76 #define STATUSREG_WE 2 /* write error */
77 #define STATUSREG_FR 0x40 /* module free */
78 #define STATUSREG_DA 0x80 /* data available */
80 #define DVB_CA_SLOTSTATE_NONE 0
81 #define DVB_CA_SLOTSTATE_UNINITIALISED 1
82 #define DVB_CA_SLOTSTATE_RUNNING 2
83 #define DVB_CA_SLOTSTATE_INVALID 3
84 #define DVB_CA_SLOTSTATE_WAITREADY 4
85 #define DVB_CA_SLOTSTATE_VALIDATE 5
86 #define DVB_CA_SLOTSTATE_WAITFR 6
87 #define DVB_CA_SLOTSTATE_LINKINIT 7
89 /* Information on a CA slot */
91 /* current state of the CAM */
94 /* mutex used for serializing access to one CI slot */
95 struct mutex slot_lock
;
97 /* Number of CAMCHANGES that have occurred since last processing */
98 atomic_t camchange_count
;
100 /* Type of last CAMCHANGE */
103 /* base address of CAM config */
106 /* value to write into Config Control register */
109 /* if 1, the CAM supports DA IRQs */
110 u8 da_irq_supported
:1;
112 /* size of the buffer to use when talking to the CAM */
115 /* buffer for incoming packets */
116 struct dvb_ringbuffer rx_buffer
;
118 /* timer used during various states of the slot */
119 unsigned long timeout
;
122 /* Private CA-interface information */
123 struct dvb_ca_private
{
124 struct kref refcount
;
126 /* pointer back to the public data structure */
127 struct dvb_ca_en50221
*pub
;
130 struct dvb_device
*dvbdev
;
132 /* Flags describing the interface (DVB_CA_FLAG_*) */
135 /* number of slots supported by this CA interface */
136 unsigned int slot_count
;
138 /* information on each slot */
139 struct dvb_ca_slot
*slot_info
;
141 /* wait queues for read() and write() operations */
142 wait_queue_head_t wait_queue
;
144 /* PID of the monitoring thread */
145 struct task_struct
*thread
;
147 /* Flag indicating if the CA device is open */
150 /* Flag indicating the thread should wake up now */
151 unsigned int wakeup
:1;
153 /* Delay the main thread should use */
157 * Slot to start looking for data to read from in the next user-space
162 /* mutex serializing ioctls */
163 struct mutex ioctl_mutex
;
166 static void dvb_ca_private_free(struct dvb_ca_private
*ca
)
170 dvb_free_device(ca
->dvbdev
);
171 for (i
= 0; i
< ca
->slot_count
; i
++)
172 vfree(ca
->slot_info
[i
].rx_buffer
.data
);
174 kfree(ca
->slot_info
);
178 static void dvb_ca_private_release(struct kref
*ref
)
180 struct dvb_ca_private
*ca
;
182 ca
= container_of(ref
, struct dvb_ca_private
, refcount
);
183 dvb_ca_private_free(ca
);
186 static void dvb_ca_private_get(struct dvb_ca_private
*ca
)
188 kref_get(&ca
->refcount
);
191 static void dvb_ca_private_put(struct dvb_ca_private
*ca
)
193 kref_put(&ca
->refcount
, dvb_ca_private_release
);
196 static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private
*ca
);
197 static int dvb_ca_en50221_read_data(struct dvb_ca_private
*ca
, int slot
,
198 u8
*ebuf
, int ecount
);
199 static int dvb_ca_en50221_write_data(struct dvb_ca_private
*ca
, int slot
,
200 u8
*ebuf
, int ecount
);
203 * Safely find needle in haystack.
205 * @haystack: Buffer to look in.
206 * @hlen: Number of bytes in haystack.
207 * @needle: Buffer to find.
208 * @nlen: Number of bytes in needle.
209 * return: Pointer into haystack needle was found at, or NULL if not found.
211 static char *findstr(char *haystack
, int hlen
, char *needle
, int nlen
)
218 for (i
= 0; i
<= hlen
- nlen
; i
++) {
219 if (!strncmp(haystack
+ i
, needle
, nlen
))
226 /* ************************************************************************** */
227 /* EN50221 physical interface functions */
230 * dvb_ca_en50221_check_camstatus - Check CAM status.
232 static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private
*ca
, int slot
)
234 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
240 if (ca
->flags
& DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE
)
241 return (atomic_read(&sl
->camchange_count
) != 0);
244 slot_status
= ca
->pub
->poll_slot_status(ca
->pub
, slot
, ca
->open
);
246 cam_present_now
= (slot_status
& DVB_CA_EN50221_POLL_CAM_PRESENT
) ? 1 : 0;
247 cam_changed
= (slot_status
& DVB_CA_EN50221_POLL_CAM_CHANGED
) ? 1 : 0;
249 int cam_present_old
= (sl
->slot_state
!= DVB_CA_SLOTSTATE_NONE
);
251 cam_changed
= (cam_present_now
!= cam_present_old
);
255 if (!cam_present_now
)
256 sl
->camchange_type
= DVB_CA_EN50221_CAMCHANGE_REMOVED
;
258 sl
->camchange_type
= DVB_CA_EN50221_CAMCHANGE_INSERTED
;
259 atomic_set(&sl
->camchange_count
, 1);
261 if ((sl
->slot_state
== DVB_CA_SLOTSTATE_WAITREADY
) &&
262 (slot_status
& DVB_CA_EN50221_POLL_CAM_READY
)) {
263 /* move to validate state if reset is completed */
264 sl
->slot_state
= DVB_CA_SLOTSTATE_VALIDATE
;
272 * dvb_ca_en50221_wait_if_status - Wait for flags to become set on the STATUS
273 * register on a CAM interface, checking for errors and timeout.
276 * @slot: Slot on interface.
277 * @waitfor: Flags to wait for.
278 * @timeout_hz: Timeout in milliseconds.
280 * return: 0 on success, nonzero on error.
282 static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private
*ca
, int slot
,
283 u8 waitfor
, int timeout_hz
)
285 unsigned long timeout
;
288 dprintk("%s\n", __func__
);
290 /* loop until timeout elapsed */
292 timeout
= jiffies
+ timeout_hz
;
296 /* read the status and check for error */
297 res
= ca
->pub
->read_cam_control(ca
->pub
, slot
, CTRLIF_STATUS
);
301 /* if we got the flags, it was successful! */
303 dprintk("%s succeeded timeout:%lu\n",
304 __func__
, jiffies
- start
);
308 /* check for timeout */
309 if (time_after(jiffies
, timeout
))
313 usleep_range(1000, 1100);
316 dprintk("%s failed timeout:%lu\n", __func__
, jiffies
- start
);
318 /* if we get here, we've timed out */
323 * dvb_ca_en50221_link_init - Initialise the link layer connection to a CAM.
328 * return: 0 on success, nonzero on failure.
330 static int dvb_ca_en50221_link_init(struct dvb_ca_private
*ca
, int slot
)
332 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
337 dprintk("%s\n", __func__
);
339 /* we'll be determining these during this function */
340 sl
->da_irq_supported
= 0;
343 * set the host link buffer size temporarily. it will be overwritten
344 * with the real negotiated size later.
346 sl
->link_buf_size
= 2;
348 /* read the buffer size from the CAM */
349 ret
= ca
->pub
->write_cam_control(ca
->pub
, slot
, CTRLIF_COMMAND
,
353 ret
= dvb_ca_en50221_wait_if_status(ca
, slot
, STATUSREG_DA
, HZ
);
356 ret
= dvb_ca_en50221_read_data(ca
, slot
, buf
, 2);
359 ret
= ca
->pub
->write_cam_control(ca
->pub
, slot
, CTRLIF_COMMAND
, IRQEN
);
364 * store it, and choose the minimum of our buffer and the CAM's buffer
367 buf_size
= (buf
[0] << 8) | buf
[1];
368 if (buf_size
> HOST_LINK_BUF_SIZE
)
369 buf_size
= HOST_LINK_BUF_SIZE
;
370 sl
->link_buf_size
= buf_size
;
371 buf
[0] = buf_size
>> 8;
372 buf
[1] = buf_size
& 0xff;
373 dprintk("Chosen link buffer size of %i\n", buf_size
);
375 /* write the buffer size to the CAM */
376 ret
= ca
->pub
->write_cam_control(ca
->pub
, slot
, CTRLIF_COMMAND
,
380 ret
= dvb_ca_en50221_wait_if_status(ca
, slot
, STATUSREG_FR
, HZ
/ 10);
383 ret
= dvb_ca_en50221_write_data(ca
, slot
, buf
, 2);
386 ret
= ca
->pub
->write_cam_control(ca
->pub
, slot
, CTRLIF_COMMAND
, IRQEN
);
395 * dvb_ca_en50221_read_tuple - Read a tuple from attribute memory.
399 * @address: Address to read from. Updated.
400 * @tuple_type: Tuple id byte. Updated.
401 * @tuple_length: Tuple length. Updated.
402 * @tuple: Dest buffer for tuple (must be 256 bytes). Updated.
404 * return: 0 on success, nonzero on error.
406 static int dvb_ca_en50221_read_tuple(struct dvb_ca_private
*ca
, int slot
,
407 int *address
, int *tuple_type
,
408 int *tuple_length
, u8
*tuple
)
413 int _address
= *address
;
415 /* grab the next tuple length and type */
416 _tuple_type
= ca
->pub
->read_attribute_mem(ca
->pub
, slot
, _address
);
419 if (_tuple_type
== 0xff) {
420 dprintk("END OF CHAIN TUPLE type:0x%x\n", _tuple_type
);
422 *tuple_type
= _tuple_type
;
426 _tuple_length
= ca
->pub
->read_attribute_mem(ca
->pub
, slot
,
428 if (_tuple_length
< 0)
429 return _tuple_length
;
432 dprintk("TUPLE type:0x%x length:%i\n", _tuple_type
, _tuple_length
);
434 /* read in the whole tuple */
435 for (i
= 0; i
< _tuple_length
; i
++) {
436 tuple
[i
] = ca
->pub
->read_attribute_mem(ca
->pub
, slot
,
438 dprintk(" 0x%02x: 0x%02x %c\n",
440 ((tuple
[i
] > 31) && (tuple
[i
] < 127)) ? tuple
[i
] : '.');
442 _address
+= (_tuple_length
* 2);
445 *tuple_type
= _tuple_type
;
446 *tuple_length
= _tuple_length
;
452 * dvb_ca_en50221_parse_attributes - Parse attribute memory of a CAM module,
453 * extracting Config register, and checking it is a DVB CAM module.
458 * return: 0 on success, <0 on failure.
460 static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private
*ca
, int slot
)
462 struct dvb_ca_slot
*sl
;
470 int got_cftableentry
= 0;
476 /* CISTPL_DEVICE_0A */
477 status
= dvb_ca_en50221_read_tuple(ca
, slot
, &address
, &tuple_type
,
478 &tuple_length
, tuple
);
481 if (tuple_type
!= 0x1D)
484 /* CISTPL_DEVICE_0C */
485 status
= dvb_ca_en50221_read_tuple(ca
, slot
, &address
, &tuple_type
,
486 &tuple_length
, tuple
);
489 if (tuple_type
!= 0x1C)
493 status
= dvb_ca_en50221_read_tuple(ca
, slot
, &address
, &tuple_type
,
494 &tuple_length
, tuple
);
497 if (tuple_type
!= 0x15)
501 status
= dvb_ca_en50221_read_tuple(ca
, slot
, &address
, &tuple_type
,
502 &tuple_length
, tuple
);
505 if (tuple_type
!= 0x20)
507 if (tuple_length
!= 4)
509 manfid
= (tuple
[1] << 8) | tuple
[0];
510 devid
= (tuple
[3] << 8) | tuple
[2];
513 status
= dvb_ca_en50221_read_tuple(ca
, slot
, &address
, &tuple_type
,
514 &tuple_length
, tuple
);
517 if (tuple_type
!= 0x1A)
519 if (tuple_length
< 3)
522 /* extract the configbase */
524 if (tuple_length
< (3 + rasz
+ 14))
526 sl
= &ca
->slot_info
[slot
];
528 for (i
= 0; i
< rasz
+ 1; i
++)
529 sl
->config_base
|= (tuple
[2 + i
] << (8 * i
));
531 /* check it contains the correct DVB string */
532 dvb_str
= findstr((char *)tuple
, tuple_length
, "DVB_CI_V", 8);
535 if (tuple_length
< ((dvb_str
- (char *)tuple
) + 12))
538 /* is it a version we support? */
539 if (strncmp(dvb_str
+ 8, "1.00", 4)) {
540 pr_err("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n",
541 ca
->dvbdev
->adapter
->num
, dvb_str
[8], dvb_str
[9],
542 dvb_str
[10], dvb_str
[11]);
546 /* process the CFTABLE_ENTRY tuples, and any after those */
547 while ((!end_chain
) && (address
< 0x1000)) {
548 status
= dvb_ca_en50221_read_tuple(ca
, slot
, &address
,
549 &tuple_type
, &tuple_length
,
553 switch (tuple_type
) {
554 case 0x1B: /* CISTPL_CFTABLE_ENTRY */
555 if (tuple_length
< (2 + 11 + 17))
558 /* if we've already parsed one, just use it */
559 if (got_cftableentry
)
562 /* get the config option */
563 sl
->config_option
= tuple
[0] & 0x3f;
565 /* OK, check it contains the correct strings */
566 if (!findstr((char *)tuple
, tuple_length
,
568 !findstr((char *)tuple
, tuple_length
,
569 "DVB_CI_MODULE", 13))
572 got_cftableentry
= 1;
575 case 0x14: /* CISTPL_NO_LINK */
578 case 0xFF: /* CISTPL_END */
582 default: /* Unknown tuple type - just skip this tuple */
583 dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n",
584 tuple_type
, tuple_length
);
589 if ((address
> 0x1000) || (!got_cftableentry
))
592 dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n",
593 manfid
, devid
, sl
->config_base
, sl
->config_option
);
600 * dvb_ca_en50221_set_configoption - Set CAM's configoption correctly.
603 * @slot: Slot containing the CAM.
605 static int dvb_ca_en50221_set_configoption(struct dvb_ca_private
*ca
, int slot
)
607 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
610 dprintk("%s\n", __func__
);
612 /* set the config option */
613 ca
->pub
->write_attribute_mem(ca
->pub
, slot
, sl
->config_base
,
617 configoption
= ca
->pub
->read_attribute_mem(ca
->pub
, slot
,
619 dprintk("Set configoption 0x%x, read configoption 0x%x\n",
620 sl
->config_option
, configoption
& 0x3f);
627 * dvb_ca_en50221_read_data - This function talks to an EN50221 CAM control
628 * interface. It reads a buffer of data from the CAM. The data can either
629 * be stored in a supplied buffer, or automatically be added to the slot's
633 * @slot: Slot to read from.
634 * @ebuf: If non-NULL, the data will be written to this buffer. If NULL,
635 * the data will be added into the buffering system as a normal
637 * @ecount: Size of ebuf. Ignored if ebuf is NULL.
639 * return: Number of bytes read, or < 0 on error
641 static int dvb_ca_en50221_read_data(struct dvb_ca_private
*ca
, int slot
,
642 u8
*ebuf
, int ecount
)
644 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
647 u8 buf
[HOST_LINK_BUF_SIZE
];
650 dprintk("%s\n", __func__
);
652 /* check if we have space for a link buf in the rx_buffer */
656 if (!sl
->rx_buffer
.data
) {
660 buf_free
= dvb_ringbuffer_free(&sl
->rx_buffer
);
662 if (buf_free
< (sl
->link_buf_size
+
663 DVB_RINGBUFFER_PKTHDRSIZE
)) {
669 if (ca
->pub
->read_data
&&
670 (sl
->slot_state
!= DVB_CA_SLOTSTATE_LINKINIT
)) {
672 status
= ca
->pub
->read_data(ca
->pub
, slot
, buf
,
675 status
= ca
->pub
->read_data(ca
->pub
, slot
, buf
, ecount
);
682 /* check if there is data available */
683 status
= ca
->pub
->read_cam_control(ca
->pub
, slot
,
687 if (!(status
& STATUSREG_DA
)) {
693 /* read the amount of data */
694 status
= ca
->pub
->read_cam_control(ca
->pub
, slot
,
698 bytes_read
= status
<< 8;
699 status
= ca
->pub
->read_cam_control(ca
->pub
, slot
,
703 bytes_read
|= status
;
705 /* check it will fit */
707 if (bytes_read
> sl
->link_buf_size
) {
708 pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",
709 ca
->dvbdev
->adapter
->num
, bytes_read
,
711 sl
->slot_state
= DVB_CA_SLOTSTATE_LINKINIT
;
715 if (bytes_read
< 2) {
716 pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",
717 ca
->dvbdev
->adapter
->num
);
718 sl
->slot_state
= DVB_CA_SLOTSTATE_LINKINIT
;
723 if (bytes_read
> ecount
) {
724 pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",
725 ca
->dvbdev
->adapter
->num
);
731 /* fill the buffer */
732 for (i
= 0; i
< bytes_read
; i
++) {
733 /* read byte and check */
734 status
= ca
->pub
->read_cam_control(ca
->pub
, slot
,
739 /* OK, store it in the buffer */
743 /* check for read error (RE should now be 0) */
744 status
= ca
->pub
->read_cam_control(ca
->pub
, slot
,
748 if (status
& STATUSREG_RE
) {
749 sl
->slot_state
= DVB_CA_SLOTSTATE_LINKINIT
;
756 * OK, add it to the receive buffer, or copy into external buffer if
760 if (!sl
->rx_buffer
.data
) {
764 dvb_ringbuffer_pkt_write(&sl
->rx_buffer
, buf
, bytes_read
);
766 memcpy(ebuf
, buf
, bytes_read
);
769 dprintk("Received CA packet for slot %i connection id 0x%x last_frag:%i size:0x%x\n", slot
,
770 buf
[0], (buf
[1] & 0x80) == 0, bytes_read
);
772 /* wake up readers when a last_fragment is received */
773 if ((buf
[1] & 0x80) == 0x00)
774 wake_up_interruptible(&ca
->wait_queue
);
783 * dvb_ca_en50221_write_data - This function talks to an EN50221 CAM control
784 * interface. It writes a buffer of data to a CAM.
787 * @slot: Slot to write to.
788 * @buf: The data in this buffer is treated as a complete link-level packet to
790 * @bytes_write: Size of ebuf.
792 * return: Number of bytes written, or < 0 on error.
794 static int dvb_ca_en50221_write_data(struct dvb_ca_private
*ca
, int slot
,
795 u8
*buf
, int bytes_write
)
797 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
801 dprintk("%s\n", __func__
);
804 if (bytes_write
> sl
->link_buf_size
)
807 if (ca
->pub
->write_data
&&
808 (sl
->slot_state
!= DVB_CA_SLOTSTATE_LINKINIT
))
809 return ca
->pub
->write_data(ca
->pub
, slot
, buf
, bytes_write
);
812 * it is possible we are dealing with a single buffer implementation,
813 * thus if there is data available for read or if there is even a read
814 * already in progress, we do nothing but awake the kernel thread to
815 * process the data if necessary.
817 status
= ca
->pub
->read_cam_control(ca
->pub
, slot
, CTRLIF_STATUS
);
820 if (status
& (STATUSREG_DA
| STATUSREG_RE
)) {
821 if (status
& STATUSREG_DA
)
822 dvb_ca_en50221_thread_wakeup(ca
);
829 status
= ca
->pub
->write_cam_control(ca
->pub
, slot
, CTRLIF_COMMAND
,
834 /* check if interface is still free */
835 status
= ca
->pub
->read_cam_control(ca
->pub
, slot
, CTRLIF_STATUS
);
838 if (!(status
& STATUSREG_FR
)) {
839 /* it wasn't free => try again later */
845 * It may need some time for the CAM to settle down, or there might
846 * be a race condition between the CAM, writing HC and our last
847 * check for DA. This happens, if the CAM asserts DA, just after
848 * checking DA before we are setting HC. In this case it might be
849 * a bug in the CAM to keep the FR bit, the lower layer/HW
850 * communication requires a longer timeout or the CAM needs more
851 * time internally. But this happens in reality!
852 * We need to read the status from the HW again and do the same
853 * we did for the previous check for DA
855 status
= ca
->pub
->read_cam_control(ca
->pub
, slot
, CTRLIF_STATUS
);
859 if (status
& (STATUSREG_DA
| STATUSREG_RE
)) {
860 if (status
& STATUSREG_DA
)
861 dvb_ca_en50221_thread_wakeup(ca
);
867 /* send the amount of data */
868 status
= ca
->pub
->write_cam_control(ca
->pub
, slot
, CTRLIF_SIZE_HIGH
,
872 status
= ca
->pub
->write_cam_control(ca
->pub
, slot
, CTRLIF_SIZE_LOW
,
877 /* send the buffer */
878 for (i
= 0; i
< bytes_write
; i
++) {
879 status
= ca
->pub
->write_cam_control(ca
->pub
, slot
, CTRLIF_DATA
,
885 /* check for write error (WE should now be 0) */
886 status
= ca
->pub
->read_cam_control(ca
->pub
, slot
, CTRLIF_STATUS
);
889 if (status
& STATUSREG_WE
) {
890 sl
->slot_state
= DVB_CA_SLOTSTATE_LINKINIT
;
894 status
= bytes_write
;
896 dprintk("Wrote CA packet for slot %i, connection id 0x%x last_frag:%i size:0x%x\n", slot
,
897 buf
[0], (buf
[1] & 0x80) == 0, bytes_write
);
900 ca
->pub
->write_cam_control(ca
->pub
, slot
, CTRLIF_COMMAND
, IRQEN
);
906 /* ************************************************************************** */
907 /* EN50221 higher level functions */
910 * dvb_ca_en50221_slot_shutdown - A CAM has been removed => shut it down.
913 * @slot: Slot to shut down.
915 static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private
*ca
, int slot
)
917 dprintk("%s\n", __func__
);
919 ca
->pub
->slot_shutdown(ca
->pub
, slot
);
920 ca
->slot_info
[slot
].slot_state
= DVB_CA_SLOTSTATE_NONE
;
923 * need to wake up all processes to check if they're now trying to
924 * write to a defunct CAM
926 wake_up_interruptible(&ca
->wait_queue
);
928 dprintk("Slot %i shutdown\n", slot
);
935 * dvb_ca_en50221_camchange_irq - A CAMCHANGE IRQ has occurred.
937 * @pubca: CA instance.
938 * @slot: Slot concerned.
939 * @change_type: One of the DVB_CA_CAMCHANGE_* values.
941 void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221
*pubca
, int slot
,
944 struct dvb_ca_private
*ca
= pubca
->private;
945 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
947 dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot
, change_type
);
949 switch (change_type
) {
950 case DVB_CA_EN50221_CAMCHANGE_REMOVED
:
951 case DVB_CA_EN50221_CAMCHANGE_INSERTED
:
958 sl
->camchange_type
= change_type
;
959 atomic_inc(&sl
->camchange_count
);
960 dvb_ca_en50221_thread_wakeup(ca
);
962 EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq
);
965 * dvb_ca_en50221_camready_irq - A CAMREADY IRQ has occurred.
967 * @pubca: CA instance.
968 * @slot: Slot concerned.
970 void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221
*pubca
, int slot
)
972 struct dvb_ca_private
*ca
= pubca
->private;
973 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
975 dprintk("CAMREADY IRQ slot:%i\n", slot
);
977 if (sl
->slot_state
== DVB_CA_SLOTSTATE_WAITREADY
) {
978 sl
->slot_state
= DVB_CA_SLOTSTATE_VALIDATE
;
979 dvb_ca_en50221_thread_wakeup(ca
);
982 EXPORT_SYMBOL(dvb_ca_en50221_camready_irq
);
985 * dvb_ca_en50221_frda_irq - An FR or DA IRQ has occurred.
987 * @pubca: CA instance.
988 * @slot: Slot concerned.
990 void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221
*pubca
, int slot
)
992 struct dvb_ca_private
*ca
= pubca
->private;
993 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
996 dprintk("FR/DA IRQ slot:%i\n", slot
);
998 switch (sl
->slot_state
) {
999 case DVB_CA_SLOTSTATE_LINKINIT
:
1000 flags
= ca
->pub
->read_cam_control(pubca
, slot
, CTRLIF_STATUS
);
1001 if (flags
& STATUSREG_DA
) {
1002 dprintk("CAM supports DA IRQ\n");
1003 sl
->da_irq_supported
= 1;
1007 case DVB_CA_SLOTSTATE_RUNNING
:
1009 dvb_ca_en50221_thread_wakeup(ca
);
1013 EXPORT_SYMBOL(dvb_ca_en50221_frda_irq
);
1015 /* ************************************************************************** */
1016 /* EN50221 thread functions */
1019 * Wake up the DVB CA thread
1023 static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private
*ca
)
1025 dprintk("%s\n", __func__
);
1029 wake_up_process(ca
->thread
);
1033 * Update the delay used by the thread.
1037 static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private
*ca
)
1040 int curdelay
= 100000000;
1044 * Beware of too high polling frequency, because one polling
1045 * call might take several hundred milliseconds until timeout!
1047 for (slot
= 0; slot
< ca
->slot_count
; slot
++) {
1048 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
1050 switch (sl
->slot_state
) {
1052 case DVB_CA_SLOTSTATE_NONE
:
1053 delay
= HZ
* 60; /* 60s */
1054 if (!(ca
->flags
& DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE
))
1055 delay
= HZ
* 5; /* 5s */
1057 case DVB_CA_SLOTSTATE_INVALID
:
1058 delay
= HZ
* 60; /* 60s */
1059 if (!(ca
->flags
& DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE
))
1060 delay
= HZ
/ 10; /* 100ms */
1063 case DVB_CA_SLOTSTATE_UNINITIALISED
:
1064 case DVB_CA_SLOTSTATE_WAITREADY
:
1065 case DVB_CA_SLOTSTATE_VALIDATE
:
1066 case DVB_CA_SLOTSTATE_WAITFR
:
1067 case DVB_CA_SLOTSTATE_LINKINIT
:
1068 delay
= HZ
/ 10; /* 100ms */
1071 case DVB_CA_SLOTSTATE_RUNNING
:
1072 delay
= HZ
* 60; /* 60s */
1073 if (!(ca
->flags
& DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE
))
1074 delay
= HZ
/ 10; /* 100ms */
1076 if ((!sl
->da_irq_supported
) ||
1077 (!(ca
->flags
& DVB_CA_EN50221_FLAG_IRQ_DA
)))
1078 delay
= HZ
/ 10; /* 100ms */
1083 if (delay
< curdelay
)
1087 ca
->delay
= curdelay
;
1091 * Poll if the CAM is gone.
1094 * @slot: Slot to process.
1095 * return:: 0 .. no change
1096 * 1 .. CAM state changed
1099 static int dvb_ca_en50221_poll_cam_gone(struct dvb_ca_private
*ca
, int slot
)
1105 * we need this extra check for annoying interfaces like the
1108 if ((!(ca
->flags
& DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE
)) &&
1109 (ca
->pub
->poll_slot_status
)) {
1110 status
= ca
->pub
->poll_slot_status(ca
->pub
, slot
, 0);
1112 DVB_CA_EN50221_POLL_CAM_PRESENT
)) {
1113 ca
->slot_info
[slot
].slot_state
= DVB_CA_SLOTSTATE_NONE
;
1114 dvb_ca_en50221_thread_update_delay(ca
);
1122 * Thread state machine for one CA slot to perform the data transfer.
1125 * @slot: Slot to process.
1127 static void dvb_ca_en50221_thread_state_machine(struct dvb_ca_private
*ca
,
1130 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
1135 mutex_lock(&sl
->slot_lock
);
1137 /* check the cam status + deal with CAMCHANGEs */
1138 while (dvb_ca_en50221_check_camstatus(ca
, slot
)) {
1139 /* clear down an old CI slot if necessary */
1140 if (sl
->slot_state
!= DVB_CA_SLOTSTATE_NONE
)
1141 dvb_ca_en50221_slot_shutdown(ca
, slot
);
1143 /* if a CAM is NOW present, initialise it */
1144 if (sl
->camchange_type
== DVB_CA_EN50221_CAMCHANGE_INSERTED
)
1145 sl
->slot_state
= DVB_CA_SLOTSTATE_UNINITIALISED
;
1147 /* we've handled one CAMCHANGE */
1148 dvb_ca_en50221_thread_update_delay(ca
);
1149 atomic_dec(&sl
->camchange_count
);
1152 /* CAM state machine */
1153 switch (sl
->slot_state
) {
1154 case DVB_CA_SLOTSTATE_NONE
:
1155 case DVB_CA_SLOTSTATE_INVALID
:
1156 /* no action needed */
1159 case DVB_CA_SLOTSTATE_UNINITIALISED
:
1160 sl
->slot_state
= DVB_CA_SLOTSTATE_WAITREADY
;
1161 ca
->pub
->slot_reset(ca
->pub
, slot
);
1162 sl
->timeout
= jiffies
+ (INIT_TIMEOUT_SECS
* HZ
);
1165 case DVB_CA_SLOTSTATE_WAITREADY
:
1166 if (time_after(jiffies
, sl
->timeout
)) {
1167 pr_err("dvb_ca adaptor %d: PC card did not respond :(\n",
1168 ca
->dvbdev
->adapter
->num
);
1169 sl
->slot_state
= DVB_CA_SLOTSTATE_INVALID
;
1170 dvb_ca_en50221_thread_update_delay(ca
);
1174 * no other action needed; will automatically change state when
1179 case DVB_CA_SLOTSTATE_VALIDATE
:
1180 if (dvb_ca_en50221_parse_attributes(ca
, slot
) != 0) {
1181 if (dvb_ca_en50221_poll_cam_gone(ca
, slot
))
1184 pr_err("dvb_ca adapter %d: Invalid PC card inserted :(\n",
1185 ca
->dvbdev
->adapter
->num
);
1186 sl
->slot_state
= DVB_CA_SLOTSTATE_INVALID
;
1187 dvb_ca_en50221_thread_update_delay(ca
);
1190 if (dvb_ca_en50221_set_configoption(ca
, slot
) != 0) {
1191 pr_err("dvb_ca adapter %d: Unable to initialise CAM :(\n",
1192 ca
->dvbdev
->adapter
->num
);
1193 sl
->slot_state
= DVB_CA_SLOTSTATE_INVALID
;
1194 dvb_ca_en50221_thread_update_delay(ca
);
1197 if (ca
->pub
->write_cam_control(ca
->pub
, slot
,
1200 pr_err("dvb_ca adapter %d: Unable to reset CAM IF\n",
1201 ca
->dvbdev
->adapter
->num
);
1202 sl
->slot_state
= DVB_CA_SLOTSTATE_INVALID
;
1203 dvb_ca_en50221_thread_update_delay(ca
);
1206 dprintk("DVB CAM validated successfully\n");
1208 sl
->timeout
= jiffies
+ (INIT_TIMEOUT_SECS
* HZ
);
1209 sl
->slot_state
= DVB_CA_SLOTSTATE_WAITFR
;
1213 case DVB_CA_SLOTSTATE_WAITFR
:
1214 if (time_after(jiffies
, sl
->timeout
)) {
1215 pr_err("dvb_ca adapter %d: DVB CAM did not respond :(\n",
1216 ca
->dvbdev
->adapter
->num
);
1217 sl
->slot_state
= DVB_CA_SLOTSTATE_INVALID
;
1218 dvb_ca_en50221_thread_update_delay(ca
);
1222 flags
= ca
->pub
->read_cam_control(ca
->pub
, slot
, CTRLIF_STATUS
);
1223 if (flags
& STATUSREG_FR
) {
1224 sl
->slot_state
= DVB_CA_SLOTSTATE_LINKINIT
;
1229 case DVB_CA_SLOTSTATE_LINKINIT
:
1230 if (dvb_ca_en50221_link_init(ca
, slot
) != 0) {
1231 if (dvb_ca_en50221_poll_cam_gone(ca
, slot
))
1234 pr_err("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n",
1235 ca
->dvbdev
->adapter
->num
);
1236 sl
->slot_state
= DVB_CA_SLOTSTATE_UNINITIALISED
;
1237 dvb_ca_en50221_thread_update_delay(ca
);
1241 if (!sl
->rx_buffer
.data
) {
1242 rxbuf
= vmalloc(RX_BUFFER_SIZE
);
1244 pr_err("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n",
1245 ca
->dvbdev
->adapter
->num
);
1246 sl
->slot_state
= DVB_CA_SLOTSTATE_INVALID
;
1247 dvb_ca_en50221_thread_update_delay(ca
);
1250 dvb_ringbuffer_init(&sl
->rx_buffer
, rxbuf
,
1254 ca
->pub
->slot_ts_enable(ca
->pub
, slot
);
1255 sl
->slot_state
= DVB_CA_SLOTSTATE_RUNNING
;
1256 dvb_ca_en50221_thread_update_delay(ca
);
1257 pr_info("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n",
1258 ca
->dvbdev
->adapter
->num
);
1261 case DVB_CA_SLOTSTATE_RUNNING
:
1265 /* poll slots for data */
1267 while (dvb_ca_en50221_read_data(ca
, slot
, NULL
, 0) > 0) {
1272 * if a CAMCHANGE occurred at some point, do not do any
1273 * more processing of this slot
1275 if (dvb_ca_en50221_check_camstatus(ca
, slot
)) {
1277 * we don't want to sleep on the next iteration
1278 * so we can handle the cam change
1284 /* check if we've hit our limit this time */
1285 if (++pktcount
>= MAX_RX_PACKETS_PER_ITERATION
) {
1287 * don't sleep; there is likely to be more data
1297 mutex_unlock(&sl
->slot_lock
);
1301 * Kernel thread which monitors CA slots for CAM changes, and performs data
1304 static int dvb_ca_en50221_thread(void *data
)
1306 struct dvb_ca_private
*ca
= data
;
1309 dprintk("%s\n", __func__
);
1311 /* choose the correct initial delay */
1312 dvb_ca_en50221_thread_update_delay(ca
);
1315 while (!kthread_should_stop()) {
1316 /* sleep for a bit */
1318 set_current_state(TASK_INTERRUPTIBLE
);
1319 schedule_timeout(ca
->delay
);
1320 if (kthread_should_stop())
1325 /* go through all the slots processing them */
1326 for (slot
= 0; slot
< ca
->slot_count
; slot
++)
1327 dvb_ca_en50221_thread_state_machine(ca
, slot
);
1333 /* ************************************************************************** */
1334 /* EN50221 IO interface functions */
1337 * Real ioctl implementation.
1338 * NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them.
1340 * @file: File concerned.
1341 * @cmd: IOCTL command.
1342 * @parg: Associated argument.
1344 * return: 0 on success, <0 on error.
1346 static int dvb_ca_en50221_io_do_ioctl(struct file
*file
,
1347 unsigned int cmd
, void *parg
)
1349 struct dvb_device
*dvbdev
= file
->private_data
;
1350 struct dvb_ca_private
*ca
= dvbdev
->priv
;
1354 dprintk("%s\n", __func__
);
1356 if (mutex_lock_interruptible(&ca
->ioctl_mutex
))
1357 return -ERESTARTSYS
;
1361 for (slot
= 0; slot
< ca
->slot_count
; slot
++) {
1362 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
1364 mutex_lock(&sl
->slot_lock
);
1365 if (sl
->slot_state
!= DVB_CA_SLOTSTATE_NONE
) {
1366 dvb_ca_en50221_slot_shutdown(ca
, slot
);
1367 if (ca
->flags
& DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE
)
1368 dvb_ca_en50221_camchange_irq(ca
->pub
,
1370 DVB_CA_EN50221_CAMCHANGE_INSERTED
);
1372 mutex_unlock(&sl
->slot_lock
);
1374 ca
->next_read_slot
= 0;
1375 dvb_ca_en50221_thread_wakeup(ca
);
1379 struct ca_caps
*caps
= parg
;
1381 caps
->slot_num
= ca
->slot_count
;
1382 caps
->slot_type
= CA_CI_LINK
;
1383 caps
->descr_num
= 0;
1384 caps
->descr_type
= 0;
1388 case CA_GET_SLOT_INFO
: {
1389 struct ca_slot_info
*info
= parg
;
1390 struct dvb_ca_slot
*sl
;
1393 if ((slot
> ca
->slot_count
) || (slot
< 0)) {
1398 info
->type
= CA_CI_LINK
;
1400 sl
= &ca
->slot_info
[slot
];
1401 if ((sl
->slot_state
!= DVB_CA_SLOTSTATE_NONE
) &&
1402 (sl
->slot_state
!= DVB_CA_SLOTSTATE_INVALID
)) {
1403 info
->flags
= CA_CI_MODULE_PRESENT
;
1405 if (sl
->slot_state
== DVB_CA_SLOTSTATE_RUNNING
)
1406 info
->flags
|= CA_CI_MODULE_READY
;
1416 mutex_unlock(&ca
->ioctl_mutex
);
1421 * Wrapper for ioctl implementation.
1423 * @file: File concerned.
1424 * @cmd: IOCTL command.
1425 * @arg: Associated argument.
1427 * return: 0 on success, <0 on error.
1429 static long dvb_ca_en50221_io_ioctl(struct file
*file
,
1430 unsigned int cmd
, unsigned long arg
)
1432 return dvb_usercopy(file
, cmd
, arg
, dvb_ca_en50221_io_do_ioctl
);
1436 * Implementation of write() syscall.
1438 * @file: File structure.
1439 * @buf: Source buffer.
1440 * @count: Size of source buffer.
1441 * @ppos: Position in file (ignored).
1443 * return: Number of bytes read, or <0 on error.
1445 static ssize_t
dvb_ca_en50221_io_write(struct file
*file
,
1446 const char __user
*buf
, size_t count
,
1449 struct dvb_device
*dvbdev
= file
->private_data
;
1450 struct dvb_ca_private
*ca
= dvbdev
->priv
;
1451 struct dvb_ca_slot
*sl
;
1452 u8 slot
, connection_id
;
1454 u8 fragbuf
[HOST_LINK_BUF_SIZE
];
1457 unsigned long timeout
;
1460 dprintk("%s\n", __func__
);
1463 * Incoming packet has a 2 byte header.
1464 * hdr[0] = slot_id, hdr[1] = connection_id
1469 /* extract slot & connection id */
1470 if (copy_from_user(&slot
, buf
, 1))
1472 if (copy_from_user(&connection_id
, buf
+ 1, 1))
1477 if (slot
>= ca
->slot_count
)
1479 sl
= &ca
->slot_info
[slot
];
1481 /* check if the slot is actually running */
1482 if (sl
->slot_state
!= DVB_CA_SLOTSTATE_RUNNING
)
1485 /* fragment the packets & store in the buffer */
1486 while (fragpos
< count
) {
1487 fraglen
= sl
->link_buf_size
- 2;
1490 if (fraglen
> HOST_LINK_BUF_SIZE
- 2)
1491 fraglen
= HOST_LINK_BUF_SIZE
- 2;
1492 if ((count
- fragpos
) < fraglen
)
1493 fraglen
= count
- fragpos
;
1495 fragbuf
[0] = connection_id
;
1496 fragbuf
[1] = ((fragpos
+ fraglen
) < count
) ? 0x80 : 0x00;
1497 status
= copy_from_user(fragbuf
+ 2, buf
+ fragpos
, fraglen
);
1503 timeout
= jiffies
+ HZ
/ 2;
1505 while (!time_after(jiffies
, timeout
)) {
1507 * check the CAM hasn't been removed/reset in the
1510 if (sl
->slot_state
!= DVB_CA_SLOTSTATE_RUNNING
) {
1515 mutex_lock(&sl
->slot_lock
);
1516 status
= dvb_ca_en50221_write_data(ca
, slot
, fragbuf
,
1518 mutex_unlock(&sl
->slot_lock
);
1519 if (status
== (fraglen
+ 2)) {
1523 if (status
!= -EAGAIN
)
1526 usleep_range(1000, 1100);
1542 * Condition for waking up in dvb_ca_en50221_io_read_condition
1544 static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private
*ca
,
1545 int *result
, int *_slot
)
1551 int connection_id
= -1;
1555 slot
= ca
->next_read_slot
;
1556 while ((slot_count
< ca
->slot_count
) && (!found
)) {
1557 struct dvb_ca_slot
*sl
= &ca
->slot_info
[slot
];
1559 if (sl
->slot_state
!= DVB_CA_SLOTSTATE_RUNNING
)
1562 if (!sl
->rx_buffer
.data
)
1565 idx
= dvb_ringbuffer_pkt_next(&sl
->rx_buffer
, -1, &fraglen
);
1567 dvb_ringbuffer_pkt_read(&sl
->rx_buffer
, idx
, 0, hdr
, 2);
1568 if (connection_id
== -1)
1569 connection_id
= hdr
[0];
1570 if ((hdr
[0] == connection_id
) &&
1571 ((hdr
[1] & 0x80) == 0)) {
1577 idx
= dvb_ringbuffer_pkt_next(&sl
->rx_buffer
, idx
,
1582 slot
= (slot
+ 1) % ca
->slot_count
;
1586 ca
->next_read_slot
= slot
;
1591 * Implementation of read() syscall.
1593 * @file: File structure.
1594 * @buf: Destination buffer.
1595 * @count: Size of destination buffer.
1596 * @ppos: Position in file (ignored).
1598 * return: Number of bytes read, or <0 on error.
1600 static ssize_t
dvb_ca_en50221_io_read(struct file
*file
, char __user
*buf
,
1601 size_t count
, loff_t
*ppos
)
1603 struct dvb_device
*dvbdev
= file
->private_data
;
1604 struct dvb_ca_private
*ca
= dvbdev
->priv
;
1605 struct dvb_ca_slot
*sl
;
1610 int connection_id
= -1;
1612 int last_fragment
= 0;
1617 dprintk("%s\n", __func__
);
1620 * Outgoing packet has a 2 byte header.
1621 * hdr[0] = slot_id, hdr[1] = connection_id
1626 /* wait for some data */
1627 status
= dvb_ca_en50221_io_read_condition(ca
, &result
, &slot
);
1629 /* if we're in nonblocking mode, exit immediately */
1630 if (file
->f_flags
& O_NONBLOCK
)
1631 return -EWOULDBLOCK
;
1633 /* wait for some data */
1634 status
= wait_event_interruptible(ca
->wait_queue
,
1635 dvb_ca_en50221_io_read_condition
1636 (ca
, &result
, &slot
));
1638 if ((status
< 0) || (result
< 0)) {
1644 sl
= &ca
->slot_info
[slot
];
1645 idx
= dvb_ringbuffer_pkt_next(&sl
->rx_buffer
, -1, &fraglen
);
1649 pr_err("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n",
1650 ca
->dvbdev
->adapter
->num
);
1655 dvb_ringbuffer_pkt_read(&sl
->rx_buffer
, idx
, 0, hdr
, 2);
1656 if (connection_id
== -1)
1657 connection_id
= hdr
[0];
1658 if (hdr
[0] == connection_id
) {
1659 if (pktlen
< count
) {
1660 if ((pktlen
+ fraglen
- 2) > count
)
1661 fraglen
= count
- pktlen
;
1666 dvb_ringbuffer_pkt_read_user(&sl
->rx_buffer
,
1676 if ((hdr
[1] & 0x80) == 0)
1681 idx2
= dvb_ringbuffer_pkt_next(&sl
->rx_buffer
, idx
, &fraglen
);
1683 dvb_ringbuffer_pkt_dispose(&sl
->rx_buffer
, idx
);
1686 } while (!last_fragment
);
1689 hdr
[1] = connection_id
;
1690 status
= copy_to_user(buf
, hdr
, 2);
1702 * Implementation of file open syscall.
1704 * @inode: Inode concerned.
1705 * @file: File concerned.
1707 * return: 0 on success, <0 on failure.
1709 static int dvb_ca_en50221_io_open(struct inode
*inode
, struct file
*file
)
1711 struct dvb_device
*dvbdev
= file
->private_data
;
1712 struct dvb_ca_private
*ca
= dvbdev
->priv
;
1716 dprintk("%s\n", __func__
);
1718 if (!try_module_get(ca
->pub
->owner
))
1721 err
= dvb_generic_open(inode
, file
);
1723 module_put(ca
->pub
->owner
);
1727 for (i
= 0; i
< ca
->slot_count
; i
++) {
1728 struct dvb_ca_slot
*sl
= &ca
->slot_info
[i
];
1730 if (sl
->slot_state
== DVB_CA_SLOTSTATE_RUNNING
) {
1731 if (!sl
->rx_buffer
.data
) {
1733 * it is safe to call this here without locks
1734 * because ca->open == 0. Data is not read in
1737 dvb_ringbuffer_flush(&sl
->rx_buffer
);
1743 dvb_ca_en50221_thread_update_delay(ca
);
1744 dvb_ca_en50221_thread_wakeup(ca
);
1746 dvb_ca_private_get(ca
);
1752 * Implementation of file close syscall.
1754 * @inode: Inode concerned.
1755 * @file: File concerned.
1757 * return: 0 on success, <0 on failure.
1759 static int dvb_ca_en50221_io_release(struct inode
*inode
, struct file
*file
)
1761 struct dvb_device
*dvbdev
= file
->private_data
;
1762 struct dvb_ca_private
*ca
= dvbdev
->priv
;
1765 dprintk("%s\n", __func__
);
1767 /* mark the CA device as closed */
1769 dvb_ca_en50221_thread_update_delay(ca
);
1771 err
= dvb_generic_release(inode
, file
);
1773 module_put(ca
->pub
->owner
);
1775 dvb_ca_private_put(ca
);
1781 * Implementation of poll() syscall.
1783 * @file: File concerned.
1784 * @wait: poll wait table.
1786 * return: Standard poll mask.
1788 static __poll_t
dvb_ca_en50221_io_poll(struct file
*file
, poll_table
*wait
)
1790 struct dvb_device
*dvbdev
= file
->private_data
;
1791 struct dvb_ca_private
*ca
= dvbdev
->priv
;
1796 dprintk("%s\n", __func__
);
1798 if (dvb_ca_en50221_io_read_condition(ca
, &result
, &slot
) == 1)
1801 /* if there is something, return now */
1805 /* wait for something to happen */
1806 poll_wait(file
, &ca
->wait_queue
, wait
);
1808 if (dvb_ca_en50221_io_read_condition(ca
, &result
, &slot
) == 1)
1814 static const struct file_operations dvb_ca_fops
= {
1815 .owner
= THIS_MODULE
,
1816 .read
= dvb_ca_en50221_io_read
,
1817 .write
= dvb_ca_en50221_io_write
,
1818 .unlocked_ioctl
= dvb_ca_en50221_io_ioctl
,
1819 .open
= dvb_ca_en50221_io_open
,
1820 .release
= dvb_ca_en50221_io_release
,
1821 .poll
= dvb_ca_en50221_io_poll
,
1822 .llseek
= noop_llseek
,
1825 static const struct dvb_device dvbdev_ca
= {
1830 #if defined(CONFIG_MEDIA_CONTROLLER_DVB)
1831 .name
= "dvb-ca-en50221",
1833 .fops
= &dvb_ca_fops
,
1836 /* ************************************************************************** */
1837 /* Initialisation/shutdown functions */
1840 * Initialise a new DVB CA EN50221 interface device.
1842 * @dvb_adapter: DVB adapter to attach the new CA device to.
1843 * @pubca: The dvb_ca instance.
1844 * @flags: Flags describing the CA device (DVB_CA_FLAG_*).
1845 * @slot_count: Number of slots supported.
1847 * return: 0 on success, nonzero on failure
1849 int dvb_ca_en50221_init(struct dvb_adapter
*dvb_adapter
,
1850 struct dvb_ca_en50221
*pubca
, int flags
, int slot_count
)
1853 struct dvb_ca_private
*ca
= NULL
;
1856 dprintk("%s\n", __func__
);
1861 /* initialise the system data */
1862 ca
= kzalloc(sizeof(*ca
), GFP_KERNEL
);
1867 kref_init(&ca
->refcount
);
1870 ca
->slot_count
= slot_count
;
1871 ca
->slot_info
= kcalloc(slot_count
, sizeof(struct dvb_ca_slot
),
1873 if (!ca
->slot_info
) {
1877 init_waitqueue_head(&ca
->wait_queue
);
1880 ca
->next_read_slot
= 0;
1881 pubca
->private = ca
;
1883 /* register the DVB device */
1884 ret
= dvb_register_device(dvb_adapter
, &ca
->dvbdev
, &dvbdev_ca
, ca
,
1887 goto free_slot_info
;
1889 /* now initialise each slot */
1890 for (i
= 0; i
< slot_count
; i
++) {
1891 struct dvb_ca_slot
*sl
= &ca
->slot_info
[i
];
1893 memset(sl
, 0, sizeof(struct dvb_ca_slot
));
1894 sl
->slot_state
= DVB_CA_SLOTSTATE_NONE
;
1895 atomic_set(&sl
->camchange_count
, 0);
1896 sl
->camchange_type
= DVB_CA_EN50221_CAMCHANGE_REMOVED
;
1897 mutex_init(&sl
->slot_lock
);
1900 mutex_init(&ca
->ioctl_mutex
);
1902 if (signal_pending(current
)) {
1904 goto unregister_device
;
1908 /* create a kthread for monitoring this CA device */
1909 ca
->thread
= kthread_run(dvb_ca_en50221_thread
, ca
, "kdvb-ca-%i:%i",
1910 ca
->dvbdev
->adapter
->num
, ca
->dvbdev
->id
);
1911 if (IS_ERR(ca
->thread
)) {
1912 ret
= PTR_ERR(ca
->thread
);
1913 pr_err("dvb_ca_init: failed to start kernel_thread (%d)\n",
1915 goto unregister_device
;
1920 dvb_unregister_device(ca
->dvbdev
);
1922 kfree(ca
->slot_info
);
1926 pubca
->private = NULL
;
1929 EXPORT_SYMBOL(dvb_ca_en50221_init
);
1932 * Release a DVB CA EN50221 interface device.
1934 * @pubca: The associated dvb_ca instance.
1936 void dvb_ca_en50221_release(struct dvb_ca_en50221
*pubca
)
1938 struct dvb_ca_private
*ca
= pubca
->private;
1941 dprintk("%s\n", __func__
);
1943 /* shutdown the thread if there was one */
1944 kthread_stop(ca
->thread
);
1946 for (i
= 0; i
< ca
->slot_count
; i
++)
1947 dvb_ca_en50221_slot_shutdown(ca
, i
);
1949 dvb_remove_device(ca
->dvbdev
);
1950 dvb_ca_private_put(ca
);
1951 pubca
->private = NULL
;
1953 EXPORT_SYMBOL(dvb_ca_en50221_release
);