2 * AMD64 class Memory Controller kernel module
4 * Copyright (c) 2009 SoftwareBitMaker.
5 * Copyright (c) 2009-15 Advanced Micro Devices, Inc.
7 * This file may be distributed under the terms of the
8 * GNU General Public License.
11 #include <linux/module.h>
12 #include <linux/ctype.h>
13 #include <linux/init.h>
14 #include <linux/pci.h>
15 #include <linux/pci_ids.h>
16 #include <linux/slab.h>
17 #include <linux/mmzone.h>
18 #include <linux/edac.h>
20 #include "edac_core.h"
23 #define amd64_debug(fmt, arg...) \
24 edac_printk(KERN_DEBUG, "amd64", fmt, ##arg)
26 #define amd64_info(fmt, arg...) \
27 edac_printk(KERN_INFO, "amd64", fmt, ##arg)
29 #define amd64_notice(fmt, arg...) \
30 edac_printk(KERN_NOTICE, "amd64", fmt, ##arg)
32 #define amd64_warn(fmt, arg...) \
33 edac_printk(KERN_WARNING, "amd64", fmt, ##arg)
35 #define amd64_err(fmt, arg...) \
36 edac_printk(KERN_ERR, "amd64", fmt, ##arg)
38 #define amd64_mc_warn(mci, fmt, arg...) \
39 edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)
41 #define amd64_mc_err(mci, fmt, arg...) \
42 edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)
45 * Throughout the comments in this code, the following terms are used:
47 * SysAddr, DramAddr, and InputAddr
49 * These terms come directly from the amd64 documentation
50 * (AMD publication #26094). They are defined as follows:
53 * This is a physical address generated by a CPU core or a device
54 * doing DMA. If generated by a CPU core, a SysAddr is the result of
55 * a virtual to physical address translation by the CPU core's address
56 * translation mechanism (MMU).
59 * A DramAddr is derived from a SysAddr by subtracting an offset that
60 * depends on which node the SysAddr maps to and whether the SysAddr
61 * is within a range affected by memory hoisting. The DRAM Base
62 * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
63 * determine which node a SysAddr maps to.
65 * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
66 * is within the range of addresses specified by this register, then
67 * a value x from the DHAR is subtracted from the SysAddr to produce a
68 * DramAddr. Here, x represents the base address for the node that
69 * the SysAddr maps to plus an offset due to memory hoisting. See
70 * section 3.4.8 and the comments in amd64_get_dram_hole_info() and
71 * sys_addr_to_dram_addr() below for more information.
73 * If the SysAddr is not affected by the DHAR then a value y is
74 * subtracted from the SysAddr to produce a DramAddr. Here, y is the
75 * base address for the node that the SysAddr maps to. See section
76 * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more
80 * A DramAddr is translated to an InputAddr before being passed to the
81 * memory controller for the node that the DramAddr is associated
82 * with. The memory controller then maps the InputAddr to a csrow.
83 * If node interleaving is not in use, then the InputAddr has the same
84 * value as the DramAddr. Otherwise, the InputAddr is produced by
85 * discarding the bits used for node interleaving from the DramAddr.
86 * See section 3.4.4 for more information.
88 * The memory controller for a given node uses its DRAM CS Base and
89 * DRAM CS Mask registers to map an InputAddr to a csrow. See
90 * sections 3.5.4 and 3.5.5 for more information.
93 #define EDAC_AMD64_VERSION "3.4.0"
94 #define EDAC_MOD_STR "amd64_edac"
96 /* Extended Model from CPUID, for CPU Revision numbers */
101 /* Hardware limit on ChipSelect rows per MC and processors per system */
102 #define NUM_CHIPSELECTS 8
103 #define DRAM_RANGES 8
109 * PCI-defined configuration space registers
111 #define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
112 #define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
113 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
114 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
115 #define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
116 #define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
117 #define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531
118 #define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532
119 #define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
120 #define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582
123 * Function 1 - Address Map
125 #define DRAM_BASE_LO 0x40
126 #define DRAM_LIMIT_LO 0x44
129 * F15 M30h D18F1x2[1C:00]
131 #define DRAM_CONT_BASE 0x200
132 #define DRAM_CONT_LIMIT 0x204
135 * F15 M30h D18F1x2[4C:40]
137 #define DRAM_CONT_HIGH_OFF 0x240
139 #define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3))
140 #define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7))
141 #define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7))
144 #define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1))
145 #define dhar_base(pvt) ((pvt)->dhar & 0xff000000)
146 #define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16)
148 /* NOTE: Extra mask bit vs K8 */
149 #define f10_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff80) << 16)
151 #define DCT_CFG_SEL 0x10C
153 #define DRAM_LOCAL_NODE_BASE 0x120
154 #define DRAM_LOCAL_NODE_LIM 0x124
156 #define DRAM_BASE_HI 0x140
157 #define DRAM_LIMIT_HI 0x144
161 * Function 2 - DRAM controller
165 #define DCSB_CS_ENABLE BIT(0)
170 #define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
172 #define DRAM_CONTROL 0x78
177 /* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
178 #define DBAM_DIMM(i, reg) ((((reg) >> (4*(i)))) & 0xF)
180 #define DBAM_MAX_VALUE 11
184 #define REVE_WIDTH_128 BIT(16)
185 #define WIDTH_128 BIT(11)
189 #define DDR3_MODE BIT(8)
191 #define DCT_SEL_LO 0x110
192 #define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0))
193 #define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2))
195 #define dct_ganging_enabled(pvt) ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4)))
197 #define dct_data_intlv_enabled(pvt) ((pvt)->dct_sel_lo & BIT(5))
198 #define dct_memory_cleared(pvt) ((pvt)->dct_sel_lo & BIT(10))
200 #define SWAP_INTLV_REG 0x10c
202 #define DCT_SEL_HI 0x114
204 #define F15H_M60H_SCRCTRL 0x1C8
207 * Function 3 - Misc Control
212 #define NBCFG_CHIPKILL BIT(23)
213 #define NBCFG_ECC_ENABLE BIT(22)
216 #define F10_NBSL_EXT_ERR_ECC 0x8
217 #define NBSL_PP_OBS 0x2
221 #define F10_ONLINE_SPARE 0xB0
222 #define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1)
223 #define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)
225 #define F10_NB_ARRAY_ADDR 0xB8
226 #define F10_NB_ARRAY_DRAM BIT(31)
228 /* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */
229 #define SET_NB_ARRAY_ADDR(section) (((section) & 0x3) << 1)
231 #define F10_NB_ARRAY_DATA 0xBC
232 #define F10_NB_ARR_ECC_WR_REQ BIT(17)
233 #define SET_NB_DRAM_INJECTION_WRITE(inj) \
234 (BIT(((inj.word) & 0xF) + 20) | \
235 F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
236 #define SET_NB_DRAM_INJECTION_READ(inj) \
237 (BIT(((inj.word) & 0xF) + 20) | \
238 BIT(16) | inj.bit_map)
242 #define NBCAP_CHIPKILL BIT(4)
243 #define NBCAP_SECDED BIT(3)
244 #define NBCAP_DCT_DUAL BIT(0)
246 #define EXT_NB_MCA_CFG 0x180
249 #define MSR_MCGCTL_NBE BIT(4)
262 /* Error injection control structure */
263 struct error_injection
{
269 /* low and high part of PCI config space regs */
275 * See F1x[1, 0][7C:40] DRAM Base/Limit Registers
278 struct reg_pair base
;
282 /* A DCT chip selects collection */
284 u32 csbases
[NUM_CHIPSELECTS
];
287 u32 csmasks
[NUM_CHIPSELECTS
];
294 /* pci_device handles which we utilize */
295 struct pci_dev
*F1
, *F2
, *F3
;
297 u16 mc_node_id
; /* MC index of this MC node */
298 u8 fam
; /* CPU family */
299 u8 model
; /* ... model */
300 u8 stepping
; /* ... stepping */
302 int ext_model
; /* extended model value of this node */
306 u32 dclr0
; /* DRAM Configuration Low DCT0 reg */
307 u32 dclr1
; /* DRAM Configuration Low DCT1 reg */
308 u32 dchr0
; /* DRAM Configuration High DCT0 reg */
309 u32 dchr1
; /* DRAM Configuration High DCT1 reg */
310 u32 nbcap
; /* North Bridge Capabilities */
311 u32 nbcfg
; /* F10 North Bridge Configuration */
312 u32 ext_nbcfg
; /* Extended F10 North Bridge Configuration */
313 u32 dhar
; /* DRAM Hoist reg */
314 u32 dbam0
; /* DRAM Base Address Mapping reg for DCT0 */
315 u32 dbam1
; /* DRAM Base Address Mapping reg for DCT1 */
317 /* one for each DCT */
318 struct chip_select csels
[2];
320 /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
321 struct dram_range ranges
[DRAM_RANGES
];
323 u64 top_mem
; /* top of memory below 4GB */
324 u64 top_mem2
; /* top of memory above 4GB */
326 u32 dct_sel_lo
; /* DRAM Controller Select Low */
327 u32 dct_sel_hi
; /* DRAM Controller Select High */
328 u32 online_spare
; /* On-Line spare Reg */
330 /* x4 or x8 syndromes in use */
333 /* place to store error injection parameters prior to issue */
334 struct error_injection injection
;
336 /* cache the dram_type */
337 enum mem_type dram_type
;
349 struct mem_ctl_info
*src_mci
;
357 static inline u64
get_dram_base(struct amd64_pvt
*pvt
, u8 i
)
359 u64 addr
= ((u64
)pvt
->ranges
[i
].base
.lo
& 0xffff0000) << 8;
361 if (boot_cpu_data
.x86
== 0xf)
364 return (((u64
)pvt
->ranges
[i
].base
.hi
& 0x000000ff) << 40) | addr
;
367 static inline u64
get_dram_limit(struct amd64_pvt
*pvt
, u8 i
)
369 u64 lim
= (((u64
)pvt
->ranges
[i
].lim
.lo
& 0xffff0000) << 8) | 0x00ffffff;
371 if (boot_cpu_data
.x86
== 0xf)
374 return (((u64
)pvt
->ranges
[i
].lim
.hi
& 0x000000ff) << 40) | lim
;
377 static inline u16
extract_syndrome(u64 status
)
379 return ((status
>> 47) & 0xff) | ((status
>> 16) & 0xff00);
382 static inline u8
dct_sel_interleave_addr(struct amd64_pvt
*pvt
)
384 if (pvt
->fam
== 0x15 && pvt
->model
>= 0x30)
385 return (((pvt
->dct_sel_hi
>> 9) & 0x1) << 2) |
386 ((pvt
->dct_sel_lo
>> 6) & 0x3);
388 return ((pvt
)->dct_sel_lo
>> 6) & 0x3;
391 * per-node ECC settings descriptor
393 struct ecc_settings
{
398 unsigned long nb_mce_enable
:1;
399 unsigned long nb_ecc_prev
:1;
403 #ifdef CONFIG_EDAC_DEBUG
404 extern const struct attribute_group amd64_edac_dbg_group
;
407 #ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
408 extern const struct attribute_group amd64_edac_inj_group
;
412 * Each of the PCI Device IDs types have their own set of hardware accessor
413 * functions and per device encoding/decoding logic.
416 int (*early_channel_count
) (struct amd64_pvt
*pvt
);
417 void (*map_sysaddr_to_csrow
) (struct mem_ctl_info
*mci
, u64 sys_addr
,
419 int (*dbam_to_cs
) (struct amd64_pvt
*pvt
, u8 dct
,
420 unsigned cs_mode
, int cs_mask_nr
);
423 struct amd64_family_type
{
424 const char *ctl_name
;
429 int __amd64_read_pci_cfg_dword(struct pci_dev
*pdev
, int offset
,
430 u32
*val
, const char *func
);
431 int __amd64_write_pci_cfg_dword(struct pci_dev
*pdev
, int offset
,
432 u32 val
, const char *func
);
434 #define amd64_read_pci_cfg(pdev, offset, val) \
435 __amd64_read_pci_cfg_dword(pdev, offset, val, __func__)
437 #define amd64_write_pci_cfg(pdev, offset, val) \
438 __amd64_write_pci_cfg_dword(pdev, offset, val, __func__)
440 int amd64_get_dram_hole_info(struct mem_ctl_info
*mci
, u64
*hole_base
,
441 u64
*hole_offset
, u64
*hole_size
);
443 #define to_mci(k) container_of(k, struct mem_ctl_info, dev)
445 /* Injection helpers */
446 static inline void disable_caches(void *dummy
)
448 write_cr0(read_cr0() | X86_CR0_CD
);
452 static inline void enable_caches(void *dummy
)
454 write_cr0(read_cr0() & ~X86_CR0_CD
);
457 static inline u8
dram_intlv_en(struct amd64_pvt
*pvt
, unsigned int i
)
459 if (pvt
->fam
== 0x15 && pvt
->model
>= 0x30) {
461 amd64_read_pci_cfg(pvt
->F1
, DRAM_CONT_LIMIT
, &tmp
);
462 return (u8
) tmp
& 0xF;
464 return (u8
) (pvt
->ranges
[i
].base
.lo
>> 8) & 0x7;
467 static inline u8
dhar_valid(struct amd64_pvt
*pvt
)
469 if (pvt
->fam
== 0x15 && pvt
->model
>= 0x30) {
471 amd64_read_pci_cfg(pvt
->F1
, DRAM_CONT_BASE
, &tmp
);
472 return (tmp
>> 1) & BIT(0);
474 return (pvt
)->dhar
& BIT(0);
477 static inline u32
dct_sel_baseaddr(struct amd64_pvt
*pvt
)
479 if (pvt
->fam
== 0x15 && pvt
->model
>= 0x30) {
481 amd64_read_pci_cfg(pvt
->F1
, DRAM_CONT_BASE
, &tmp
);
482 return (tmp
>> 11) & 0x1FFF;
484 return (pvt
)->dct_sel_lo
& 0xFFFFF800;