?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86: hpet: Fix copy-and-paste mistake in earlier change
[linux/fpc-iii.git] / drivers / gpu / drm / gma500 / mdfld_intel_display.c
blob3f3cd619c79f87895243c8885c52fe7a066ce82f
1 /*
2 * Copyright © 2006-2007 Intel Corporation
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
11 * more details.
12 *
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, write to the Free Software Foundation, Inc.,
15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16 *
17 * Authors:
18 * Eric Anholt <eric@anholt.net>
19 */
20
21 #include <linux/i2c.h>
22 #include <linux/pm_runtime.h>
23
24 #include <drm/drmP.h>
25 #include "psb_intel_reg.h"
26 #include "psb_intel_display.h"
27 #include "framebuffer.h"
28 #include "mdfld_output.h"
29 #include "mdfld_dsi_output.h"
30
31 /* Hardcoded currently */
32 static int ksel = KSEL_CRYSTAL_19;
33
34 struct psb_intel_range_t {
35 int min, max;
36 };
37
38 struct mrst_limit_t {
39 struct psb_intel_range_t dot, m, p1;
40 };
41
42 struct mrst_clock_t {
43 /* derived values */
44 int dot;
45 int m;
46 int p1;
47 };
48
49 #define COUNT_MAX 0x10000000
50
51 void mdfldWaitForPipeDisable(struct drm_device *dev, int pipe)
52 {
53 struct drm_psb_private *dev_priv = dev->dev_private;
54 const struct psb_offset *map = &dev_priv->regmap[pipe];
55 int count, temp;
56
57 switch (pipe) {
58 case 0:
59 case 1:
60 case 2:
61 break;
62 default:
63 DRM_ERROR("Illegal Pipe Number.\n");
64 return;
65 }
66
67 /* FIXME JLIU7_PO */
68 psb_intel_wait_for_vblank(dev);
69 return;
70
71 /* Wait for for the pipe disable to take effect. */
72 for (count = 0; count < COUNT_MAX; count++) {
73 temp = REG_READ(map->conf);
74 if ((temp & PIPEACONF_PIPE_STATE) == 0)
75 break;
76 }
77 }
78
79 void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe)
80 {
81 struct drm_psb_private *dev_priv = dev->dev_private;
82 const struct psb_offset *map = &dev_priv->regmap[pipe];
83 int count, temp;
84
85 switch (pipe) {
86 case 0:
87 case 1:
88 case 2:
89 break;
90 default:
91 DRM_ERROR("Illegal Pipe Number.\n");
92 return;
93 }
94
95 /* FIXME JLIU7_PO */
96 psb_intel_wait_for_vblank(dev);
97 return;
98
99 /* Wait for for the pipe enable to take effect. */
100 for (count = 0; count < COUNT_MAX; count++) {
101 temp = REG_READ(map->conf);
102 if ((temp & PIPEACONF_PIPE_STATE) == 1)
103 break;
104 }
105 }
106
107 static void psb_intel_crtc_prepare(struct drm_crtc *crtc)
108 {
109 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
110 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
111 }
112
113 static void psb_intel_crtc_commit(struct drm_crtc *crtc)
114 {
115 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
116 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
117 }
118
119 static bool psb_intel_crtc_mode_fixup(struct drm_crtc *crtc,
120 struct drm_display_mode *mode,
121 struct drm_display_mode *adjusted_mode)
122 {
123 return true;
124 }
125
126 /**
127 * Return the pipe currently connected to the panel fitter,
128 * or -1 if the panel fitter is not present or not in use
129 */
130 static int psb_intel_panel_fitter_pipe(struct drm_device *dev)
131 {
132 u32 pfit_control;
133
134 pfit_control = REG_READ(PFIT_CONTROL);
135
136 /* See if the panel fitter is in use */
137 if ((pfit_control & PFIT_ENABLE) == 0)
138 return -1;
139
140 /* 965 can place panel fitter on either pipe */
141 return (pfit_control >> 29) & 0x3;
142 }
143
144 static struct drm_device globle_dev;
145
146 void mdfld__intel_plane_set_alpha(int enable)
147 {
148 struct drm_device *dev = &globle_dev;
149 int dspcntr_reg = DSPACNTR;
150 u32 dspcntr;
151
152 dspcntr = REG_READ(dspcntr_reg);
153
154 if (enable) {
155 dspcntr &= ~DISPPLANE_32BPP_NO_ALPHA;
156 dspcntr |= DISPPLANE_32BPP;
157 } else {
158 dspcntr &= ~DISPPLANE_32BPP;
159 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
160 }
161
162 REG_WRITE(dspcntr_reg, dspcntr);
163 }
164
165 static int check_fb(struct drm_framebuffer *fb)
166 {
167 if (!fb)
168 return 0;
169
170 switch (fb->bits_per_pixel) {
171 case 8:
172 case 16:
173 case 24:
174 case 32:
175 return 0;
176 default:
177 DRM_ERROR("Unknown color depth\n");
178 return -EINVAL;
179 }
180 }
181
182 static int mdfld__intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
183 struct drm_framebuffer *old_fb)
184 {
185 struct drm_device *dev = crtc->dev;
186 struct drm_psb_private *dev_priv = dev->dev_private;
187 struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
188 struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
189 int pipe = psb_intel_crtc->pipe;
190 const struct psb_offset *map = &dev_priv->regmap[pipe];
191 unsigned long start, offset;
192 u32 dspcntr;
193 int ret;
194
195 memcpy(&globle_dev, dev, sizeof(struct drm_device));
196
197 dev_dbg(dev->dev, "pipe = 0x%x.\n", pipe);
198
199 /* no fb bound */
200 if (!crtc->fb) {
201 dev_dbg(dev->dev, "No FB bound\n");
202 return 0;
203 }
204
205 ret = check_fb(crtc->fb);
206 if (ret)
207 return ret;
208
209 if (pipe > 2) {
210 DRM_ERROR("Illegal Pipe Number.\n");
211 return -EINVAL;
212 }
213
214 if (!gma_power_begin(dev, true))
215 return 0;
216
217 start = psbfb->gtt->offset;
218 offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
219
220 REG_WRITE(map->stride, crtc->fb->pitches[0]);
221 dspcntr = REG_READ(map->cntr);
222 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
223
224 switch (crtc->fb->bits_per_pixel) {
225 case 8:
226 dspcntr |= DISPPLANE_8BPP;
227 break;
228 case 16:
229 if (crtc->fb->depth == 15)
230 dspcntr |= DISPPLANE_15_16BPP;
231 else
232 dspcntr |= DISPPLANE_16BPP;
233 break;
234 case 24:
235 case 32:
236 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
237 break;
238 }
239 REG_WRITE(map->cntr, dspcntr);
240
241 dev_dbg(dev->dev, "Writing base %08lX %08lX %d %d\n",
242 start, offset, x, y);
243 REG_WRITE(map->linoff, offset);
244 REG_READ(map->linoff);
245 REG_WRITE(map->surf, start);
246 REG_READ(map->surf);
247
248 gma_power_end(dev);
249
250 return 0;
251 }
252
253 /*
254 * Disable the pipe, plane and pll.
255 *
256 */
257 void mdfld_disable_crtc(struct drm_device *dev, int pipe)
258 {
259 struct drm_psb_private *dev_priv = dev->dev_private;
260 const struct psb_offset *map = &dev_priv->regmap[pipe];
261 u32 temp;
262
263 dev_dbg(dev->dev, "pipe = %d\n", pipe);
264
265
266 if (pipe != 1)
267 mdfld_dsi_gen_fifo_ready(dev, MIPI_GEN_FIFO_STAT_REG(pipe),
268 HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
269
270 /* Disable display plane */
271 temp = REG_READ(map->cntr);
272 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
273 REG_WRITE(map->cntr,
274 temp & ~DISPLAY_PLANE_ENABLE);
275 /* Flush the plane changes */
276 REG_WRITE(map->base, REG_READ(map->base));
277 REG_READ(map->base);
278 }
279
280 /* FIXME_JLIU7 MDFLD_PO revisit */
281
282 /* Next, disable display pipes */
283 temp = REG_READ(map->conf);
284 if ((temp & PIPEACONF_ENABLE) != 0) {
285 temp &= ~PIPEACONF_ENABLE;
286 temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
287 REG_WRITE(map->conf, temp);
288 REG_READ(map->conf);
289
290 /* Wait for for the pipe disable to take effect. */
291 mdfldWaitForPipeDisable(dev, pipe);
292 }
293
294 temp = REG_READ(map->dpll);
295 if (temp & DPLL_VCO_ENABLE) {
296 if ((pipe != 1 &&
297 !((REG_READ(PIPEACONF) | REG_READ(PIPECCONF))
298 & PIPEACONF_ENABLE)) || pipe == 1) {
299 temp &= ~(DPLL_VCO_ENABLE);
300 REG_WRITE(map->dpll, temp);
301 REG_READ(map->dpll);
302 /* Wait for the clocks to turn off. */
303 /* FIXME_MDFLD PO may need more delay */
304 udelay(500);
305
306 if (!(temp & MDFLD_PWR_GATE_EN)) {
307 /* gating power of DPLL */
308 REG_WRITE(map->dpll, temp | MDFLD_PWR_GATE_EN);
309 /* FIXME_MDFLD PO - change 500 to 1 after PO */
310 udelay(5000);
311 }
312 }
313 }
314
315 }
316
317 /**
318 * Sets the power management mode of the pipe and plane.
319 *
320 * This code should probably grow support for turning the cursor off and back
321 * on appropriately at the same time as we're turning the pipe off/on.
322 */
323 static void mdfld_crtc_dpms(struct drm_crtc *crtc, int mode)
324 {
325 struct drm_device *dev = crtc->dev;
326 struct drm_psb_private *dev_priv = dev->dev_private;
327 struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
328 int pipe = psb_intel_crtc->pipe;
329 const struct psb_offset *map = &dev_priv->regmap[pipe];
330 u32 pipeconf = dev_priv->pipeconf[pipe];
331 u32 temp;
332 int timeout = 0;
333
334 dev_dbg(dev->dev, "mode = %d, pipe = %d\n", mode, pipe);
335
336 /* Note: Old code uses pipe a stat for pipe b but that appears
337 to be a bug */
338
339 if (!gma_power_begin(dev, true))
340 return;
341
342 /* XXX: When our outputs are all unaware of DPMS modes other than off
343 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
344 */
345 switch (mode) {
346 case DRM_MODE_DPMS_ON:
347 case DRM_MODE_DPMS_STANDBY:
348 case DRM_MODE_DPMS_SUSPEND:
349 /* Enable the DPLL */
350 temp = REG_READ(map->dpll);
351
352 if ((temp & DPLL_VCO_ENABLE) == 0) {
353 /* When ungating power of DPLL, needs to wait 0.5us
354 before enable the VCO */
355 if (temp & MDFLD_PWR_GATE_EN) {
356 temp &= ~MDFLD_PWR_GATE_EN;
357 REG_WRITE(map->dpll, temp);
358 /* FIXME_MDFLD PO - change 500 to 1 after PO */
359 udelay(500);
360 }
361
362 REG_WRITE(map->dpll, temp);
363 REG_READ(map->dpll);
364 /* FIXME_MDFLD PO - change 500 to 1 after PO */
365 udelay(500);
366
367 REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
368 REG_READ(map->dpll);
369
370 /**
371 * wait for DSI PLL to lock
372 * NOTE: only need to poll status of pipe 0 and pipe 1,
373 * since both MIPI pipes share the same PLL.
374 */
375 while ((pipe != 2) && (timeout < 20000) &&
376 !(REG_READ(map->conf) & PIPECONF_DSIPLL_LOCK)) {
377 udelay(150);
378 timeout++;
379 }
380 }
381
382 /* Enable the plane */
383 temp = REG_READ(map->cntr);
384 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
385 REG_WRITE(map->cntr,
386 temp | DISPLAY_PLANE_ENABLE);
387 /* Flush the plane changes */
388 REG_WRITE(map->base, REG_READ(map->base));
389 }
390
391 /* Enable the pipe */
392 temp = REG_READ(map->conf);
393 if ((temp & PIPEACONF_ENABLE) == 0) {
394 REG_WRITE(map->conf, pipeconf);
395
396 /* Wait for for the pipe enable to take effect. */
397 mdfldWaitForPipeEnable(dev, pipe);
398 }
399
400 /*workaround for sighting 3741701 Random X blank display*/
401 /*perform w/a in video mode only on pipe A or C*/
402 if (pipe == 0 || pipe == 2) {
403 REG_WRITE(map->status, REG_READ(map->status));
404 msleep(100);
405 if (PIPE_VBLANK_STATUS & REG_READ(map->status))
406 dev_dbg(dev->dev, "OK");
407 else {
408 dev_dbg(dev->dev, "STUCK!!!!");
409 /*shutdown controller*/
410 temp = REG_READ(map->cntr);
411 REG_WRITE(map->cntr,
412 temp & ~DISPLAY_PLANE_ENABLE);
413 REG_WRITE(map->base, REG_READ(map->base));
414 /*mdfld_dsi_dpi_shut_down(dev, pipe);*/
415 REG_WRITE(0xb048, 1);
416 msleep(100);
417 temp = REG_READ(map->conf);
418 temp &= ~PIPEACONF_ENABLE;
419 REG_WRITE(map->conf, temp);
420 msleep(100); /*wait for pipe disable*/
421 REG_WRITE(MIPI_DEVICE_READY_REG(pipe), 0);
422 msleep(100);
423 REG_WRITE(0xb004, REG_READ(0xb004));
424 /* try to bring the controller back up again*/
425 REG_WRITE(MIPI_DEVICE_READY_REG(pipe), 1);
426 temp = REG_READ(map->cntr);
427 REG_WRITE(map->cntr,
428 temp | DISPLAY_PLANE_ENABLE);
429 REG_WRITE(map->base, REG_READ(map->base));
430 /*mdfld_dsi_dpi_turn_on(dev, pipe);*/
431 REG_WRITE(0xb048, 2);
432 msleep(100);
433 temp = REG_READ(map->conf);
434 temp |= PIPEACONF_ENABLE;
435 REG_WRITE(map->conf, temp);
436 }
437 }
438
439 psb_intel_crtc_load_lut(crtc);
440
441 /* Give the overlay scaler a chance to enable
442 if it's on this pipe */
443 /* psb_intel_crtc_dpms_video(crtc, true); TODO */
444
445 break;
446 case DRM_MODE_DPMS_OFF:
447 /* Give the overlay scaler a chance to disable
448 * if it's on this pipe */
449 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
450 if (pipe != 1)
451 mdfld_dsi_gen_fifo_ready(dev,
452 MIPI_GEN_FIFO_STAT_REG(pipe),
453 HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
454
455 /* Disable the VGA plane that we never use */
456 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
457
458 /* Disable display plane */
459 temp = REG_READ(map->cntr);
460 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
461 REG_WRITE(map->cntr,
462 temp & ~DISPLAY_PLANE_ENABLE);
463 /* Flush the plane changes */
464 REG_WRITE(map->base, REG_READ(map->base));
465 REG_READ(map->base);
466 }
467
468 /* Next, disable display pipes */
469 temp = REG_READ(map->conf);
470 if ((temp & PIPEACONF_ENABLE) != 0) {
471 temp &= ~PIPEACONF_ENABLE;
472 temp |= PIPECONF_PLANE_OFF | PIPECONF_CURSOR_OFF;
473 REG_WRITE(map->conf, temp);
474 REG_READ(map->conf);
475
476 /* Wait for for the pipe disable to take effect. */
477 mdfldWaitForPipeDisable(dev, pipe);
478 }
479
480 temp = REG_READ(map->dpll);
481 if (temp & DPLL_VCO_ENABLE) {
482 if ((pipe != 1 && !((REG_READ(PIPEACONF)
483 | REG_READ(PIPECCONF)) & PIPEACONF_ENABLE))
484 || pipe == 1) {
485 temp &= ~(DPLL_VCO_ENABLE);
486 REG_WRITE(map->dpll, temp);
487 REG_READ(map->dpll);
488 /* Wait for the clocks to turn off. */
489 /* FIXME_MDFLD PO may need more delay */
490 udelay(500);
491 }
492 }
493 break;
494 }
495 gma_power_end(dev);
496 }
497
498
499 #define MDFLD_LIMT_DPLL_19 0
500 #define MDFLD_LIMT_DPLL_25 1
501 #define MDFLD_LIMT_DPLL_83 2
502 #define MDFLD_LIMT_DPLL_100 3
503 #define MDFLD_LIMT_DSIPLL_19 4
504 #define MDFLD_LIMT_DSIPLL_25 5
505 #define MDFLD_LIMT_DSIPLL_83 6
506 #define MDFLD_LIMT_DSIPLL_100 7
507
508 #define MDFLD_DOT_MIN 19750
509 #define MDFLD_DOT_MAX 120000
510 #define MDFLD_DPLL_M_MIN_19 113
511 #define MDFLD_DPLL_M_MAX_19 155
512 #define MDFLD_DPLL_P1_MIN_19 2
513 #define MDFLD_DPLL_P1_MAX_19 10
514 #define MDFLD_DPLL_M_MIN_25 101
515 #define MDFLD_DPLL_M_MAX_25 130
516 #define MDFLD_DPLL_P1_MIN_25 2
517 #define MDFLD_DPLL_P1_MAX_25 10
518 #define MDFLD_DPLL_M_MIN_83 64
519 #define MDFLD_DPLL_M_MAX_83 64
520 #define MDFLD_DPLL_P1_MIN_83 2
521 #define MDFLD_DPLL_P1_MAX_83 2
522 #define MDFLD_DPLL_M_MIN_100 64
523 #define MDFLD_DPLL_M_MAX_100 64
524 #define MDFLD_DPLL_P1_MIN_100 2
525 #define MDFLD_DPLL_P1_MAX_100 2
526 #define MDFLD_DSIPLL_M_MIN_19 131
527 #define MDFLD_DSIPLL_M_MAX_19 175
528 #define MDFLD_DSIPLL_P1_MIN_19 3
529 #define MDFLD_DSIPLL_P1_MAX_19 8
530 #define MDFLD_DSIPLL_M_MIN_25 97
531 #define MDFLD_DSIPLL_M_MAX_25 140
532 #define MDFLD_DSIPLL_P1_MIN_25 3
533 #define MDFLD_DSIPLL_P1_MAX_25 9
534 #define MDFLD_DSIPLL_M_MIN_83 33
535 #define MDFLD_DSIPLL_M_MAX_83 92
536 #define MDFLD_DSIPLL_P1_MIN_83 2
537 #define MDFLD_DSIPLL_P1_MAX_83 3
538 #define MDFLD_DSIPLL_M_MIN_100 97
539 #define MDFLD_DSIPLL_M_MAX_100 140
540 #define MDFLD_DSIPLL_P1_MIN_100 3
541 #define MDFLD_DSIPLL_P1_MAX_100 9
542
543 static const struct mrst_limit_t mdfld_limits[] = {
544 { /* MDFLD_LIMT_DPLL_19 */
545 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
546 .m = {.min = MDFLD_DPLL_M_MIN_19, .max = MDFLD_DPLL_M_MAX_19},
547 .p1 = {.min = MDFLD_DPLL_P1_MIN_19, .max = MDFLD_DPLL_P1_MAX_19},
548 },
549 { /* MDFLD_LIMT_DPLL_25 */
550 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
551 .m = {.min = MDFLD_DPLL_M_MIN_25, .max = MDFLD_DPLL_M_MAX_25},
552 .p1 = {.min = MDFLD_DPLL_P1_MIN_25, .max = MDFLD_DPLL_P1_MAX_25},
553 },
554 { /* MDFLD_LIMT_DPLL_83 */
555 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
556 .m = {.min = MDFLD_DPLL_M_MIN_83, .max = MDFLD_DPLL_M_MAX_83},
557 .p1 = {.min = MDFLD_DPLL_P1_MIN_83, .max = MDFLD_DPLL_P1_MAX_83},
558 },
559 { /* MDFLD_LIMT_DPLL_100 */
560 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
561 .m = {.min = MDFLD_DPLL_M_MIN_100, .max = MDFLD_DPLL_M_MAX_100},
562 .p1 = {.min = MDFLD_DPLL_P1_MIN_100, .max = MDFLD_DPLL_P1_MAX_100},
563 },
564 { /* MDFLD_LIMT_DSIPLL_19 */
565 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
566 .m = {.min = MDFLD_DSIPLL_M_MIN_19, .max = MDFLD_DSIPLL_M_MAX_19},
567 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_19, .max = MDFLD_DSIPLL_P1_MAX_19},
568 },
569 { /* MDFLD_LIMT_DSIPLL_25 */
570 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
571 .m = {.min = MDFLD_DSIPLL_M_MIN_25, .max = MDFLD_DSIPLL_M_MAX_25},
572 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_25, .max = MDFLD_DSIPLL_P1_MAX_25},
573 },
574 { /* MDFLD_LIMT_DSIPLL_83 */
575 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
576 .m = {.min = MDFLD_DSIPLL_M_MIN_83, .max = MDFLD_DSIPLL_M_MAX_83},
577 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_83, .max = MDFLD_DSIPLL_P1_MAX_83},
578 },
579 { /* MDFLD_LIMT_DSIPLL_100 */
580 .dot = {.min = MDFLD_DOT_MIN, .max = MDFLD_DOT_MAX},
581 .m = {.min = MDFLD_DSIPLL_M_MIN_100, .max = MDFLD_DSIPLL_M_MAX_100},
582 .p1 = {.min = MDFLD_DSIPLL_P1_MIN_100, .max = MDFLD_DSIPLL_P1_MAX_100},
583 },
584 };
585
586 #define MDFLD_M_MIN 21
587 #define MDFLD_M_MAX 180
588 static const u32 mdfld_m_converts[] = {
589 /* M configuration table from 9-bit LFSR table */
590 224, 368, 440, 220, 366, 439, 219, 365, 182, 347, /* 21 - 30 */
591 173, 342, 171, 85, 298, 149, 74, 37, 18, 265, /* 31 - 40 */
592 388, 194, 353, 432, 216, 108, 310, 155, 333, 166, /* 41 - 50 */
593 83, 41, 276, 138, 325, 162, 337, 168, 340, 170, /* 51 - 60 */
594 341, 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 61 - 70 */
595 461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */
596 106, 53, 282, 397, 354, 227, 113, 56, 284, 142, /* 81 - 90 */
597 71, 35, 273, 136, 324, 418, 465, 488, 500, 506, /* 91 - 100 */
598 253, 126, 63, 287, 399, 455, 483, 241, 376, 444, /* 101 - 110 */
599 478, 495, 503, 251, 381, 446, 479, 239, 375, 443, /* 111 - 120 */
600 477, 238, 119, 315, 157, 78, 295, 147, 329, 420, /* 121 - 130 */
601 210, 105, 308, 154, 77, 38, 275, 137, 68, 290, /* 131 - 140 */
602 145, 328, 164, 82, 297, 404, 458, 485, 498, 249, /* 141 - 150 */
603 380, 190, 351, 431, 471, 235, 117, 314, 413, 206, /* 151 - 160 */
604 103, 51, 25, 12, 262, 387, 193, 96, 48, 280, /* 161 - 170 */
605 396, 198, 99, 305, 152, 76, 294, 403, 457, 228, /* 171 - 180 */
606 };
607
608 static const struct mrst_limit_t *mdfld_limit(struct drm_crtc *crtc)
609 {
610 const struct mrst_limit_t *limit = NULL;
611 struct drm_device *dev = crtc->dev;
612 struct drm_psb_private *dev_priv = dev->dev_private;
613
614 if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)
615 || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI2)) {
616 if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
617 limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_19];
618 else if (ksel == KSEL_BYPASS_25)
619 limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_25];
620 else if ((ksel == KSEL_BYPASS_83_100) &&
621 (dev_priv->core_freq == 166))
622 limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_83];
623 else if ((ksel == KSEL_BYPASS_83_100) &&
624 (dev_priv->core_freq == 100 ||
625 dev_priv->core_freq == 200))
626 limit = &mdfld_limits[MDFLD_LIMT_DSIPLL_100];
627 } else if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
628 if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19))
629 limit = &mdfld_limits[MDFLD_LIMT_DPLL_19];
630 else if (ksel == KSEL_BYPASS_25)
631 limit = &mdfld_limits[MDFLD_LIMT_DPLL_25];
632 else if ((ksel == KSEL_BYPASS_83_100) &&
633 (dev_priv->core_freq == 166))
634 limit = &mdfld_limits[MDFLD_LIMT_DPLL_83];
635 else if ((ksel == KSEL_BYPASS_83_100) &&
636 (dev_priv->core_freq == 100 ||
637 dev_priv->core_freq == 200))
638 limit = &mdfld_limits[MDFLD_LIMT_DPLL_100];
639 } else {
640 limit = NULL;
641 dev_dbg(dev->dev, "mdfld_limit Wrong display type.\n");
642 }
643
644 return limit;
645 }
646
647 /** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
648 static void mdfld_clock(int refclk, struct mrst_clock_t *clock)
649 {
650 clock->dot = (refclk * clock->m) / clock->p1;
651 }
652
653 /**
654 * Returns a set of divisors for the desired target clock with the given refclk,
655 * or FALSE. Divisor values are the actual divisors for
656 */
657 static bool
658 mdfldFindBestPLL(struct drm_crtc *crtc, int target, int refclk,
659 struct mrst_clock_t *best_clock)
660 {
661 struct mrst_clock_t clock;
662 const struct mrst_limit_t *limit = mdfld_limit(crtc);
663 int err = target;
664
665 memset(best_clock, 0, sizeof(*best_clock));
666
667 for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
668 for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
669 clock.p1++) {
670 int this_err;
671
672 mdfld_clock(refclk, &clock);
673
674 this_err = abs(clock.dot - target);
675 if (this_err < err) {
676 *best_clock = clock;
677 err = this_err;
678 }
679 }
680 }
681 return err != target;
682 }
683
684 static int mdfld_crtc_mode_set(struct drm_crtc *crtc,
685 struct drm_display_mode *mode,
686 struct drm_display_mode *adjusted_mode,
687 int x, int y,
688 struct drm_framebuffer *old_fb)
689 {
690 struct drm_device *dev = crtc->dev;
691 struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
692 struct drm_psb_private *dev_priv = dev->dev_private;
693 int pipe = psb_intel_crtc->pipe;
694 const struct psb_offset *map = &dev_priv->regmap[pipe];
695 int refclk = 0;
696 int clk_n = 0, clk_p2 = 0, clk_byte = 1, clk = 0, m_conv = 0,
697 clk_tmp = 0;
698 struct mrst_clock_t clock;
699 bool ok;
700 u32 dpll = 0, fp = 0;
701 bool is_mipi = false, is_mipi2 = false, is_hdmi = false;
702 struct drm_mode_config *mode_config = &dev->mode_config;
703 struct psb_intel_encoder *psb_intel_encoder = NULL;
704 uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
705 struct drm_encoder *encoder;
706 struct drm_connector *connector;
707 int timeout = 0;
708 int ret;
709
710 dev_dbg(dev->dev, "pipe = 0x%x\n", pipe);
711
712 #if 0
713 if (pipe == 1) {
714 if (!gma_power_begin(dev, true))
715 return 0;
716 android_hdmi_crtc_mode_set(crtc, mode, adjusted_mode,
717 x, y, old_fb);
718 goto mrst_crtc_mode_set_exit;
719 }
720 #endif
721
722 ret = check_fb(crtc->fb);
723 if (ret)
724 return ret;
725
726 dev_dbg(dev->dev, "adjusted_hdisplay = %d\n",
727 adjusted_mode->hdisplay);
728 dev_dbg(dev->dev, "adjusted_vdisplay = %d\n",
729 adjusted_mode->vdisplay);
730 dev_dbg(dev->dev, "adjusted_hsync_start = %d\n",
731 adjusted_mode->hsync_start);
732 dev_dbg(dev->dev, "adjusted_hsync_end = %d\n",
733 adjusted_mode->hsync_end);
734 dev_dbg(dev->dev, "adjusted_htotal = %d\n",
735 adjusted_mode->htotal);
736 dev_dbg(dev->dev, "adjusted_vsync_start = %d\n",
737 adjusted_mode->vsync_start);
738 dev_dbg(dev->dev, "adjusted_vsync_end = %d\n",
739 adjusted_mode->vsync_end);
740 dev_dbg(dev->dev, "adjusted_vtotal = %d\n",
741 adjusted_mode->vtotal);
742 dev_dbg(dev->dev, "adjusted_clock = %d\n",
743 adjusted_mode->clock);
744 dev_dbg(dev->dev, "hdisplay = %d\n",
745 mode->hdisplay);
746 dev_dbg(dev->dev, "vdisplay = %d\n",
747 mode->vdisplay);
748
749 if (!gma_power_begin(dev, true))
750 return 0;
751
752 memcpy(&psb_intel_crtc->saved_mode, mode,
753 sizeof(struct drm_display_mode));
754 memcpy(&psb_intel_crtc->saved_adjusted_mode, adjusted_mode,
755 sizeof(struct drm_display_mode));
756
757 list_for_each_entry(connector, &mode_config->connector_list, head) {
758 if (!connector)
759 continue;
760
761 encoder = connector->encoder;
762
763 if (!encoder)
764 continue;
765
766 if (encoder->crtc != crtc)
767 continue;
768
769 psb_intel_encoder = psb_intel_attached_encoder(connector);
770
771 switch (psb_intel_encoder->type) {
772 case INTEL_OUTPUT_MIPI:
773 is_mipi = true;
774 break;
775 case INTEL_OUTPUT_MIPI2:
776 is_mipi2 = true;
777 break;
778 case INTEL_OUTPUT_HDMI:
779 is_hdmi = true;
780 break;
781 }
782 }
783
784 /* Disable the VGA plane that we never use */
785 REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
786
787 /* Disable the panel fitter if it was on our pipe */
788 if (psb_intel_panel_fitter_pipe(dev) == pipe)
789 REG_WRITE(PFIT_CONTROL, 0);
790
791 /* pipesrc and dspsize control the size that is scaled from,
792 * which should always be the user's requested size.
793 */
794 if (pipe == 1) {
795 /* FIXME: To make HDMI display with 864x480 (TPO), 480x864
796 * (PYR) or 480x854 (TMD), set the sprite width/height and
797 * souce image size registers with the adjusted mode for
798 * pipe B.
799 */
800
801 /*
802 * The defined sprite rectangle must always be completely
803 * contained within the displayable area of the screen image
804 * (frame buffer).
805 */
806 REG_WRITE(map->size, ((min(mode->crtc_vdisplay, adjusted_mode->crtc_vdisplay) - 1) << 16)
807 | (min(mode->crtc_hdisplay, adjusted_mode->crtc_hdisplay) - 1));
808 /* Set the CRTC with encoder mode. */
809 REG_WRITE(map->src, ((mode->crtc_hdisplay - 1) << 16)
810 | (mode->crtc_vdisplay - 1));
811 } else {
812 REG_WRITE(map->size,
813 ((mode->crtc_vdisplay - 1) << 16) |
814 (mode->crtc_hdisplay - 1));
815 REG_WRITE(map->src,
816 ((mode->crtc_hdisplay - 1) << 16) |
817 (mode->crtc_vdisplay - 1));
818 }
819
820 REG_WRITE(map->pos, 0);
821
822 if (psb_intel_encoder)
823 drm_connector_property_get_value(connector,
824 dev->mode_config.scaling_mode_property, &scalingType);
825
826 if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
827 /* Medfield doesn't have register support for centering so we
828 * need to mess with the h/vblank and h/vsync start and ends
829 * to get centering
830 */
831 int offsetX = 0, offsetY = 0;
832
833 offsetX = (adjusted_mode->crtc_hdisplay -
834 mode->crtc_hdisplay) / 2;
835 offsetY = (adjusted_mode->crtc_vdisplay -
836 mode->crtc_vdisplay) / 2;
837
838 REG_WRITE(map->htotal, (mode->crtc_hdisplay - 1) |
839 ((adjusted_mode->crtc_htotal - 1) << 16));
840 REG_WRITE(map->vtotal, (mode->crtc_vdisplay - 1) |
841 ((adjusted_mode->crtc_vtotal - 1) << 16));
842 REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start -
843 offsetX - 1) |
844 ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16));
845 REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start -
846 offsetX - 1) |
847 ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16));
848 REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start -
849 offsetY - 1) |
850 ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16));
851 REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start -
852 offsetY - 1) |
853 ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16));
854 } else {
855 REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
856 ((adjusted_mode->crtc_htotal - 1) << 16));
857 REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
858 ((adjusted_mode->crtc_vtotal - 1) << 16));
859 REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
860 ((adjusted_mode->crtc_hblank_end - 1) << 16));
861 REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
862 ((adjusted_mode->crtc_hsync_end - 1) << 16));
863 REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
864 ((adjusted_mode->crtc_vblank_end - 1) << 16));
865 REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
866 ((adjusted_mode->crtc_vsync_end - 1) << 16));
867 }
868
869 /* Flush the plane changes */
870 {
871 struct drm_crtc_helper_funcs *crtc_funcs =
872 crtc->helper_private;
873 crtc_funcs->mode_set_base(crtc, x, y, old_fb);
874 }
875
876 /* setup pipeconf */
877 dev_priv->pipeconf[pipe] = PIPEACONF_ENABLE; /* FIXME_JLIU7 REG_READ(pipeconf_reg); */
878
879 /* Set up the display plane register */
880 dev_priv->dspcntr[pipe] = REG_READ(map->cntr);
881 dev_priv->dspcntr[pipe] |= pipe << DISPPLANE_SEL_PIPE_POS;
882 dev_priv->dspcntr[pipe] |= DISPLAY_PLANE_ENABLE;
883
884 if (is_mipi2)
885 goto mrst_crtc_mode_set_exit;
886 clk = adjusted_mode->clock;
887
888 if (is_hdmi) {
889 if ((ksel == KSEL_CRYSTAL_19) || (ksel == KSEL_BYPASS_19)) {
890 refclk = 19200;
891
892 if (is_mipi || is_mipi2)
893 clk_n = 1, clk_p2 = 8;
894 else if (is_hdmi)
895 clk_n = 1, clk_p2 = 10;
896 } else if (ksel == KSEL_BYPASS_25) {
897 refclk = 25000;
898
899 if (is_mipi || is_mipi2)
900 clk_n = 1, clk_p2 = 8;
901 else if (is_hdmi)
902 clk_n = 1, clk_p2 = 10;
903 } else if ((ksel == KSEL_BYPASS_83_100) &&
904 dev_priv->core_freq == 166) {
905 refclk = 83000;
906
907 if (is_mipi || is_mipi2)
908 clk_n = 4, clk_p2 = 8;
909 else if (is_hdmi)
910 clk_n = 4, clk_p2 = 10;
911 } else if ((ksel == KSEL_BYPASS_83_100) &&
912 (dev_priv->core_freq == 100 ||
913 dev_priv->core_freq == 200)) {
914 refclk = 100000;
915 if (is_mipi || is_mipi2)
916 clk_n = 4, clk_p2 = 8;
917 else if (is_hdmi)
918 clk_n = 4, clk_p2 = 10;
919 }
920
921 if (is_mipi)
922 clk_byte = dev_priv->bpp / 8;
923 else if (is_mipi2)
924 clk_byte = dev_priv->bpp2 / 8;
925
926 clk_tmp = clk * clk_n * clk_p2 * clk_byte;
927
928 dev_dbg(dev->dev, "clk = %d, clk_n = %d, clk_p2 = %d.\n",
929 clk, clk_n, clk_p2);
930 dev_dbg(dev->dev, "adjusted_mode->clock = %d, clk_tmp = %d.\n",
931 adjusted_mode->clock, clk_tmp);
932
933 ok = mdfldFindBestPLL(crtc, clk_tmp, refclk, &clock);
934
935 if (!ok) {
936 DRM_ERROR
937 ("mdfldFindBestPLL fail in mdfld_crtc_mode_set.\n");
938 } else {
939 m_conv = mdfld_m_converts[(clock.m - MDFLD_M_MIN)];
940
941 dev_dbg(dev->dev, "dot clock = %d,"
942 "m = %d, p1 = %d, m_conv = %d.\n",
943 clock.dot, clock.m,
944 clock.p1, m_conv);
945 }
946
947 dpll = REG_READ(map->dpll);
948
949 if (dpll & DPLL_VCO_ENABLE) {
950 dpll &= ~DPLL_VCO_ENABLE;
951 REG_WRITE(map->dpll, dpll);
952 REG_READ(map->dpll);
953
954 /* FIXME jliu7 check the DPLL lock bit PIPEACONF[29] */
955 /* FIXME_MDFLD PO - change 500 to 1 after PO */
956 udelay(500);
957
958 /* reset M1, N1 & P1 */
959 REG_WRITE(map->fp0, 0);
960 dpll &= ~MDFLD_P1_MASK;
961 REG_WRITE(map->dpll, dpll);
962 /* FIXME_MDFLD PO - change 500 to 1 after PO */
963 udelay(500);
964 }
965
966 /* When ungating power of DPLL, needs to wait 0.5us before
967 * enable the VCO */
968 if (dpll & MDFLD_PWR_GATE_EN) {
969 dpll &= ~MDFLD_PWR_GATE_EN;
970 REG_WRITE(map->dpll, dpll);
971 /* FIXME_MDFLD PO - change 500 to 1 after PO */
972 udelay(500);
973 }
974 dpll = 0;
975
976 #if 0 /* FIXME revisit later */
977 if (ksel == KSEL_CRYSTAL_19 || ksel == KSEL_BYPASS_19 ||
978 ksel == KSEL_BYPASS_25)
979 dpll &= ~MDFLD_INPUT_REF_SEL;
980 else if (ksel == KSEL_BYPASS_83_100)
981 dpll |= MDFLD_INPUT_REF_SEL;
982 #endif /* FIXME revisit later */
983
984 if (is_hdmi)
985 dpll |= MDFLD_VCO_SEL;
986
987 fp = (clk_n / 2) << 16;
988 fp |= m_conv;
989
990 /* compute bitmask from p1 value */
991 dpll |= (1 << (clock.p1 - 2)) << 17;
992
993 #if 0 /* 1080p30 & 720p */
994 dpll = 0x00050000;
995 fp = 0x000001be;
996 #endif
997 #if 0 /* 480p */
998 dpll = 0x02010000;
999 fp = 0x000000d2;
1000 #endif
1001 } else {
1002 #if 0 /*DBI_TPO_480x864*/
1003 dpll = 0x00020000;
1004 fp = 0x00000156;
1005 #endif /* DBI_TPO_480x864 */ /* get from spec. */
1006
1007 dpll = 0x00800000;
1008 fp = 0x000000c1;
1009 }
1010
1011 REG_WRITE(map->fp0, fp);
1012 REG_WRITE(map->dpll, dpll);
1013 /* FIXME_MDFLD PO - change 500 to 1 after PO */
1014 udelay(500);
1015
1016 dpll |= DPLL_VCO_ENABLE;
1017 REG_WRITE(map->dpll, dpll);
1018 REG_READ(map->dpll);
1019
1020 /* wait for DSI PLL to lock */
1021 while (timeout < 20000 &&
1022 !(REG_READ(map->conf) & PIPECONF_DSIPLL_LOCK)) {
1023 udelay(150);
1024 timeout++;
1025 }
1026
1027 if (is_mipi)
1028 goto mrst_crtc_mode_set_exit;
1029
1030 dev_dbg(dev->dev, "is_mipi = 0x%x\n", is_mipi);
1031
1032 REG_WRITE(map->conf, dev_priv->pipeconf[pipe]);
1033 REG_READ(map->conf);
1034
1035 /* Wait for for the pipe enable to take effect. */
1036 REG_WRITE(map->cntr, dev_priv->dspcntr[pipe]);
1037 psb_intel_wait_for_vblank(dev);
1038
1039 mrst_crtc_mode_set_exit:
1040
1041 gma_power_end(dev);
1042
1043 return 0;
1044 }
1045
1046 const struct drm_crtc_helper_funcs mdfld_helper_funcs = {
1047 .dpms = mdfld_crtc_dpms,
1048 .mode_fixup = psb_intel_crtc_mode_fixup,
1049 .mode_set = mdfld_crtc_mode_set,
1050 .mode_set_base = mdfld__intel_pipe_set_base,
1051 .prepare = psb_intel_crtc_prepare,
1052 .commit = psb_intel_crtc_commit,
1053 };
1054
Linux with added FPC-III support