serial core: fix new kernel-doc warnings
[linux/fpc-iii.git] / drivers / pci / hotplug / pciehp_pci.c
blob02e24d63b3eec78fcdb67c1274d64c6fda953640
1 /*
2 * PCI Express Hot Plug Controller Driver
4 * Copyright (C) 1995,2001 Compaq Computer Corporation
5 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
6 * Copyright (C) 2001 IBM Corp.
7 * Copyright (C) 2003-2004 Intel Corporation
9 * All rights reserved.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
19 * NON INFRINGEMENT. See the GNU General Public License for more
20 * details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
30 #include <linux/module.h>
31 #include <linux/kernel.h>
32 #include <linux/types.h>
33 #include <linux/pci.h>
34 #include "../pci.h"
35 #include "pciehp.h"
37 static int __ref pciehp_add_bridge(struct pci_dev *dev)
39 struct pci_bus *parent = dev->bus;
40 int pass, busnr, start = parent->secondary;
41 int end = parent->subordinate;
43 for (busnr = start; busnr <= end; busnr++) {
44 if (!pci_find_bus(pci_domain_nr(parent), busnr))
45 break;
47 if (busnr-- > end) {
48 err("No bus number available for hot-added bridge %s\n",
49 pci_name(dev));
50 return -1;
52 for (pass = 0; pass < 2; pass++)
53 busnr = pci_scan_bridge(parent, dev, busnr, pass);
54 if (!dev->subordinate)
55 return -1;
56 pci_bus_size_bridges(dev->subordinate);
57 pci_bus_assign_resources(parent);
58 pci_enable_bridges(parent);
59 pci_bus_add_devices(parent);
60 return 0;
63 int pciehp_configure_device(struct slot *p_slot)
65 struct pci_dev *dev;
66 struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
67 int num, fn;
68 struct controller *ctrl = p_slot->ctrl;
70 dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
71 if (dev) {
72 ctrl_err(ctrl, "Device %s already exists "
73 "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
74 pci_domain_nr(parent), p_slot->bus, p_slot->device);
75 pci_dev_put(dev);
76 return -EINVAL;
79 num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
80 if (num == 0) {
81 ctrl_err(ctrl, "No new device found\n");
82 return -ENODEV;
85 for (fn = 0; fn < 8; fn++) {
86 dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
87 if (!dev)
88 continue;
89 if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
90 ctrl_err(ctrl, "Cannot hot-add display device %s\n",
91 pci_name(dev));
92 pci_dev_put(dev);
93 continue;
95 if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
96 (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
97 pciehp_add_bridge(dev);
99 pci_configure_slot(dev);
100 pci_dev_put(dev);
103 pci_bus_assign_resources(parent);
104 pci_bus_add_devices(parent);
105 return 0;
108 int pciehp_unconfigure_device(struct slot *p_slot)
110 int ret, rc = 0;
111 int j;
112 u8 bctl = 0;
113 u8 presence = 0;
114 struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
115 u16 command;
116 struct controller *ctrl = p_slot->ctrl;
118 ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
119 __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
120 ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
121 if (ret)
122 presence = 0;
124 for (j = 0; j < 8; j++) {
125 struct pci_dev* temp = pci_get_slot(parent,
126 (p_slot->device << 3) | j);
127 if (!temp)
128 continue;
129 if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
130 ctrl_err(ctrl, "Cannot remove display device %s\n",
131 pci_name(temp));
132 pci_dev_put(temp);
133 continue;
135 if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
136 pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
137 if (bctl & PCI_BRIDGE_CTL_VGA) {
138 ctrl_err(ctrl,
139 "Cannot remove display device %s\n",
140 pci_name(temp));
141 pci_dev_put(temp);
142 continue;
145 pci_remove_bus_device(temp);
147 * Ensure that no new Requests will be generated from
148 * the device.
150 if (presence) {
151 pci_read_config_word(temp, PCI_COMMAND, &command);
152 command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
153 command |= PCI_COMMAND_INTX_DISABLE;
154 pci_write_config_word(temp, PCI_COMMAND, command);
156 pci_dev_put(temp);
159 return rc;