drivers/vidfeo/backlight: ld9040 amoled driver support
[linux/fpc-iii.git] / net / netlabel / netlabel_cipso_v4.h
blobaf7f3355103e25ace814afdb08e9134620e8ce5e
1 /*
2 * NetLabel CIPSO/IPv4 Support
4 * This file defines the CIPSO/IPv4 functions for the NetLabel system. The
5 * NetLabel system manages static and dynamic label mappings for network
6 * protocols such as CIPSO and RIPSO.
8 * Author: Paul Moore <paul.moore@hp.com>
13 * (c) Copyright Hewlett-Packard Development Company, L.P., 2006
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
23 * the GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
31 #ifndef _NETLABEL_CIPSO_V4
32 #define _NETLABEL_CIPSO_V4
34 #include <net/netlabel.h>
37 * The following NetLabel payloads are supported by the CIPSO subsystem.
39 * o ADD:
40 * Sent by an application to add a new DOI mapping table.
42 * Required attributes:
44 * NLBL_CIPSOV4_A_DOI
45 * NLBL_CIPSOV4_A_MTYPE
46 * NLBL_CIPSOV4_A_TAGLST
48 * If using CIPSO_V4_MAP_TRANS the following attributes are required:
50 * NLBL_CIPSOV4_A_MLSLVLLST
51 * NLBL_CIPSOV4_A_MLSCATLST
53 * If using CIPSO_V4_MAP_PASS or CIPSO_V4_MAP_LOCAL no additional attributes
54 * are required.
56 * o REMOVE:
57 * Sent by an application to remove a specific DOI mapping table from the
58 * CIPSO V4 system.
60 * Required attributes:
62 * NLBL_CIPSOV4_A_DOI
64 * o LIST:
65 * Sent by an application to list the details of a DOI definition. On
66 * success the kernel should send a response using the following format.
68 * Required attributes:
70 * NLBL_CIPSOV4_A_DOI
72 * The valid response message format depends on the type of the DOI mapping,
73 * the defined formats are shown below.
75 * Required attributes:
77 * NLBL_CIPSOV4_A_MTYPE
78 * NLBL_CIPSOV4_A_TAGLST
80 * If using CIPSO_V4_MAP_TRANS the following attributes are required:
82 * NLBL_CIPSOV4_A_MLSLVLLST
83 * NLBL_CIPSOV4_A_MLSCATLST
85 * If using CIPSO_V4_MAP_PASS or CIPSO_V4_MAP_LOCAL no additional attributes
86 * are required.
88 * o LISTALL:
89 * This message is sent by an application to list the valid DOIs on the
90 * system. When sent by an application there is no payload and the
91 * NLM_F_DUMP flag should be set. The kernel should respond with a series of
92 * the following messages.
94 * Required attributes:
96 * NLBL_CIPSOV4_A_DOI
97 * NLBL_CIPSOV4_A_MTYPE
101 /* NetLabel CIPSOv4 commands */
102 enum {
103 NLBL_CIPSOV4_C_UNSPEC,
104 NLBL_CIPSOV4_C_ADD,
105 NLBL_CIPSOV4_C_REMOVE,
106 NLBL_CIPSOV4_C_LIST,
107 NLBL_CIPSOV4_C_LISTALL,
108 __NLBL_CIPSOV4_C_MAX,
111 /* NetLabel CIPSOv4 attributes */
112 enum {
113 NLBL_CIPSOV4_A_UNSPEC,
114 NLBL_CIPSOV4_A_DOI,
115 /* (NLA_U32)
116 * the DOI value */
117 NLBL_CIPSOV4_A_MTYPE,
118 /* (NLA_U32)
119 * the mapping table type (defined in the cipso_ipv4.h header as
120 * CIPSO_V4_MAP_*) */
121 NLBL_CIPSOV4_A_TAG,
122 /* (NLA_U8)
123 * a CIPSO tag type, meant to be used within a NLBL_CIPSOV4_A_TAGLST
124 * attribute */
125 NLBL_CIPSOV4_A_TAGLST,
126 /* (NLA_NESTED)
127 * the CIPSO tag list for the DOI, there must be at least one
128 * NLBL_CIPSOV4_A_TAG attribute, tags listed first are given higher
129 * priorirty when sending packets */
130 NLBL_CIPSOV4_A_MLSLVLLOC,
131 /* (NLA_U32)
132 * the local MLS sensitivity level */
133 NLBL_CIPSOV4_A_MLSLVLREM,
134 /* (NLA_U32)
135 * the remote MLS sensitivity level */
136 NLBL_CIPSOV4_A_MLSLVL,
137 /* (NLA_NESTED)
138 * a MLS sensitivity level mapping, must contain only one attribute of
139 * each of the following types: NLBL_CIPSOV4_A_MLSLVLLOC and
140 * NLBL_CIPSOV4_A_MLSLVLREM */
141 NLBL_CIPSOV4_A_MLSLVLLST,
142 /* (NLA_NESTED)
143 * the CIPSO level mappings, there must be at least one
144 * NLBL_CIPSOV4_A_MLSLVL attribute */
145 NLBL_CIPSOV4_A_MLSCATLOC,
146 /* (NLA_U32)
147 * the local MLS category */
148 NLBL_CIPSOV4_A_MLSCATREM,
149 /* (NLA_U32)
150 * the remote MLS category */
151 NLBL_CIPSOV4_A_MLSCAT,
152 /* (NLA_NESTED)
153 * a MLS category mapping, must contain only one attribute of each of
154 * the following types: NLBL_CIPSOV4_A_MLSCATLOC and
155 * NLBL_CIPSOV4_A_MLSCATREM */
156 NLBL_CIPSOV4_A_MLSCATLST,
157 /* (NLA_NESTED)
158 * the CIPSO category mappings, there must be at least one
159 * NLBL_CIPSOV4_A_MLSCAT attribute */
160 __NLBL_CIPSOV4_A_MAX,
162 #define NLBL_CIPSOV4_A_MAX (__NLBL_CIPSOV4_A_MAX - 1)
164 /* NetLabel protocol functions */
165 int netlbl_cipsov4_genl_init(void);
167 /* Free the memory associated with a CIPSOv4 DOI definition */
168 void netlbl_cipsov4_doi_free(struct rcu_head *entry);
170 #endif