drivers/power/reset/keystone-reset.c

   1 /*
   2  * TI keystone reboot driver
   3  *
   4  * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/
   5  *
   6  * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/io.h>
  14 #include <linux/module.h>
  15 #include <linux/reboot.h>
  16 #include <linux/regmap.h>
  17 #include <asm/system_misc.h>
  18 #include <linux/mfd/syscon.h>
  19 #include <linux/of_platform.h>
  20
  21 #define RSTYPE_RG                       0x0
  22 #define RSCTRL_RG                       0x4
  23 #define RSCFG_RG                        0x8
  24 #define RSISO_RG                        0xc
  25
  26 #define RSCTRL_KEY_MASK                 0x0000ffff
  27 #define RSCTRL_RESET_MASK               BIT(16)
  28 #define RSCTRL_KEY                      0x5a69
  29
  30 #define RSMUX_OMODE_MASK                0xe
  31 #define RSMUX_OMODE_RESET_ON            0xa
  32 #define RSMUX_OMODE_RESET_OFF           0x0
  33 #define RSMUX_LOCK_MASK                 0x1
  34 #define RSMUX_LOCK_SET                  0x1
  35
  36 #define RSCFG_RSTYPE_SOFT               0x300f
  37 #define RSCFG_RSTYPE_HARD               0x0
  38
  39 #define WDT_MUX_NUMBER                  0x4
  40
  41 static int rspll_offset;
  42 static struct regmap *pllctrl_regs;
  43
  44 /**
  45  * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG
  46  * To be able to access to RSCTRL, RSCFG registers
  47  * we have to write a key before
  48  */
  49 static inline int rsctrl_enable_rspll_write(void)
  50 {
  51         return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
  52                                   RSCTRL_KEY_MASK, RSCTRL_KEY);
  53 }
  54
  55 static void rsctrl_restart(enum reboot_mode mode, const char *cmd)
  56 {
  57         /* enable write access to RSTCTRL */
  58         rsctrl_enable_rspll_write();
  59
  60         /* reset the SOC */
  61         regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
  62                            RSCTRL_RESET_MASK, 0);
  63 }
  64
  65 static struct of_device_id rsctrl_of_match[] = {
  66         {.compatible = "ti,keystone-reset", },
  67         {},
  68 };
  69
  70 static int rsctrl_probe(struct platform_device *pdev)
  71 {
  72         int i;
  73         int ret;
  74         u32 val;
  75         unsigned int rg;
  76         u32 rsmux_offset;
  77         struct regmap *devctrl_regs;
  78         struct device *dev = &pdev->dev;
  79         struct device_node *np = dev->of_node;
  80
  81         if (!np)
  82                 return -ENODEV;
  83
  84         /* get regmaps */
  85         pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll");
  86         if (IS_ERR(pllctrl_regs))
  87                 return PTR_ERR(pllctrl_regs);
  88
  89         devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev");
  90         if (IS_ERR(devctrl_regs))
  91                 return PTR_ERR(devctrl_regs);
  92
  93         ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset);
  94         if (ret) {
  95                 dev_err(dev, "couldn't read the reset pll offset!\n");
  96                 return -EINVAL;
  97         }
  98
  99         ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset);
 100         if (ret) {
 101                 dev_err(dev, "couldn't read the rsmux offset!\n");
 102                 return -EINVAL;
 103         }
 104
 105         /* set soft/hard reset */
 106         val = of_property_read_bool(np, "ti,soft-reset");
 107         val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD;
 108
 109         ret = rsctrl_enable_rspll_write();
 110         if (ret)
 111                 return ret;
 112
 113         ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val);
 114         if (ret)
 115                 return ret;
 116
 117         arm_pm_restart = rsctrl_restart;
 118
 119         /* disable a reset isolation for all module clocks */
 120         ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0);
 121         if (ret)
 122                 return ret;
 123
 124         /* enable a reset for watchdogs from wdt-list */
 125         for (i = 0; i < WDT_MUX_NUMBER; i++) {
 126                 ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val);
 127                 if (ret == -EOVERFLOW && !i) {
 128                         dev_err(dev, "ti,wdt-list property has to contain at"
 129                                 "least one entry\n");
 130                         return -EINVAL;
 131                 } else if (ret) {
 132                         break;
 133                 }
 134
 135                 if (val >= WDT_MUX_NUMBER) {
 136                         dev_err(dev, "ti,wdt-list property can contain"
 137                                 "only numbers < 4\n");
 138                         return -EINVAL;
 139                 }
 140
 141                 rg = rsmux_offset + val * 4;
 142
 143                 ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK,
 144                                          RSMUX_OMODE_RESET_ON |
 145                                          RSMUX_LOCK_SET);
 146                 if (ret)
 147                         return ret;
 148         }
 149
 150         return 0;
 151 }
 152
 153 static struct platform_driver rsctrl_driver = {
 154         .probe = rsctrl_probe,
 155         .driver = {
 156                 .owner = THIS_MODULE,
 157                 .name = KBUILD_MODNAME,
 158                 .of_match_table = rsctrl_of_match,
 159         },
 160 };
 161 module_platform_driver(rsctrl_driver);
 162
 163 MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
 164 MODULE_DESCRIPTION("Texas Instruments keystone reset driver");
 165 MODULE_LICENSE("GPL v2");
 166 MODULE_ALIAS("platform:" KBUILD_MODNAME);