1 /* Driver for Realtek PCI-Express card reader
4 * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2, or (at your option) any
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License along
17 * with this program; if not, see <http://www.gnu.org/licenses/>.
20 * Wei WANG (wei_wang@realsil.com.cn)
21 * Micky Ching (micky_ching@realsil.com.cn)
24 #ifndef __REALTEK_RTSX_SD_H
25 #define __REALTEK_RTSX_SD_H
27 #include "rtsx_chip.h"
29 #define SUPPORT_VOLTAGE 0x003C0000
32 #define SD_NO_ERROR 0x0
33 #define SD_CRC_ERR 0x80
34 #define SD_TO_ERR 0x40
35 #define SD_NO_CARD 0x20
37 #define SD_STS_ERR 0x08
38 #define SD_RSP_TIMEOUT 0x04
39 #define SD_IO_ERR 0x02
41 /* Return code for MMC switch bus */
42 #define SWITCH_SUCCESS 0
46 /* MMC/SD Command Index */
47 /* Basic command (class 0) */
48 #define GO_IDLE_STATE 0
49 #define SEND_OP_COND 1
50 #define ALL_SEND_CID 2
51 #define SET_RELATIVE_ADDR 3
52 #define SEND_RELATIVE_ADDR 3
54 #define IO_SEND_OP_COND 5
57 #define DESELECT_CARD 7
58 /* CMD8 is "SEND_EXT_CSD" for MMC4.x Spec
59 * while is "SEND_IF_COND" for SD 2.0
61 #define SEND_EXT_CSD 8
62 #define SEND_IF_COND 8
66 #define VOLTAGE_SWITCH 11
67 #define READ_DAT_UTIL_STOP 11
68 #define STOP_TRANSMISSION 12
69 #define SEND_STATUS 13
70 #define GO_INACTIVE_STATE 15
72 #define SET_BLOCKLEN 16
73 #define READ_SINGLE_BLOCK 17
74 #define READ_MULTIPLE_BLOCK 18
75 #define SEND_TUNING_PATTERN 19
80 #define WRITE_BLOCK 24
81 #define WRITE_MULTIPLE_BLOCK 25
82 #define PROGRAM_CSD 27
84 #define ERASE_WR_BLK_START 32
85 #define ERASE_WR_BLK_END 33
88 #define LOCK_UNLOCK 42
89 #define IO_RW_DIRECT 52
94 #define SET_BUS_WIDTH 6
96 #define SEND_NUM_WR_BLOCKS 22
97 #define SET_WR_BLK_ERASE_COUNT 23
98 #define SD_APP_OP_COND 41
99 #define SET_CLR_CARD_DETECT 42
102 #define SD_READ_COMPLETE 0x00
103 #define SD_READ_TO 0x01
104 #define SD_READ_ADVENCE 0x02
106 #define SD_CHECK_MODE 0x00
107 #define SD_SWITCH_MODE 0x80
108 #define SD_FUNC_GROUP_1 0x01
109 #define SD_FUNC_GROUP_2 0x02
110 #define SD_FUNC_GROUP_3 0x03
111 #define SD_FUNC_GROUP_4 0x04
112 #define SD_CHECK_SPEC_V1_1 0xFF
114 #define NO_ARGUMENT 0x00
115 #define CHECK_PATTERN 0x000000AA
116 #define VOLTAGE_SUPPLY_RANGE 0x00000100
117 #define SUPPORT_HIGH_AND_EXTENDED_CAPACITY 0x40000000
118 #define SUPPORT_MAX_POWER_PERMANCE 0x10000000
119 #define SUPPORT_1V8 0x01000000
121 #define SWTICH_NO_ERR 0x00
122 #define CARD_NOT_EXIST 0x01
123 #define SPEC_NOT_SUPPORT 0x02
124 #define CHECK_MODE_ERR 0x03
125 #define CHECK_NOT_READY 0x04
126 #define SWITCH_CRC_ERR 0x05
127 #define SWITCH_MODE_ERR 0x06
128 #define SWITCH_PASS 0x07
130 #ifdef SUPPORT_SD_LOCK
131 #define SD_ERASE 0x08
133 #define SD_UNLOCK 0x00
134 #define SD_CLR_PWD 0x02
135 #define SD_SET_PWD 0x01
137 #define SD_PWD_LEN 0x10
139 #define SD_LOCKED 0x80
140 #define SD_LOCK_1BIT_MODE 0x40
141 #define SD_PWD_EXIST 0x20
142 #define SD_UNLOCK_POW_ON 0x01
143 #define SD_SDR_RST 0x02
145 #define SD_NOT_ERASE 0x00
146 #define SD_UNDER_ERASING 0x01
147 #define SD_COMPLETE_ERASE 0x02
149 #define SD_RW_FORBIDDEN 0x0F
153 #define HS_SUPPORT 0x01
154 #define SDR50_SUPPORT 0x02
155 #define SDR104_SUPPORT 0x03
156 #define DDR50_SUPPORT 0x04
158 #define HS_SUPPORT_MASK 0x02
159 #define SDR50_SUPPORT_MASK 0x04
160 #define SDR104_SUPPORT_MASK 0x08
161 #define DDR50_SUPPORT_MASK 0x10
163 #define HS_QUERY_SWITCH_OK 0x01
164 #define SDR50_QUERY_SWITCH_OK 0x02
165 #define SDR104_QUERY_SWITCH_OK 0x03
166 #define DDR50_QUERY_SWITCH_OK 0x04
168 #define HS_SWITCH_BUSY 0x02
169 #define SDR50_SWITCH_BUSY 0x04
170 #define SDR104_SWITCH_BUSY 0x08
171 #define DDR50_SWITCH_BUSY 0x10
173 #define FUNCTION_GROUP1_SUPPORT_OFFSET 0x0D
174 #define FUNCTION_GROUP1_QUERY_SWITCH_OFFSET 0x10
175 #define FUNCTION_GROUP1_CHECK_BUSY_OFFSET 0x1D
177 #define DRIVING_TYPE_A 0x01
178 #define DRIVING_TYPE_B 0x00
179 #define DRIVING_TYPE_C 0x02
180 #define DRIVING_TYPE_D 0x03
182 #define DRIVING_TYPE_A_MASK 0x02
183 #define DRIVING_TYPE_B_MASK 0x01
184 #define DRIVING_TYPE_C_MASK 0x04
185 #define DRIVING_TYPE_D_MASK 0x08
187 #define TYPE_A_QUERY_SWITCH_OK 0x01
188 #define TYPE_B_QUERY_SWITCH_OK 0x00
189 #define TYPE_C_QUERY_SWITCH_OK 0x02
190 #define TYPE_D_QUERY_SWITCH_OK 0x03
192 #define TYPE_A_SWITCH_BUSY 0x02
193 #define TYPE_B_SWITCH_BUSY 0x01
194 #define TYPE_C_SWITCH_BUSY 0x04
195 #define TYPE_D_SWITCH_BUSY 0x08
197 #define FUNCTION_GROUP3_SUPPORT_OFFSET 0x09
198 #define FUNCTION_GROUP3_QUERY_SWITCH_OFFSET 0x0F
199 #define FUNCTION_GROUP3_CHECK_BUSY_OFFSET 0x19
201 #define CURRENT_LIMIT_200 0x00
202 #define CURRENT_LIMIT_400 0x01
203 #define CURRENT_LIMIT_600 0x02
204 #define CURRENT_LIMIT_800 0x03
206 #define CURRENT_LIMIT_200_MASK 0x01
207 #define CURRENT_LIMIT_400_MASK 0x02
208 #define CURRENT_LIMIT_600_MASK 0x04
209 #define CURRENT_LIMIT_800_MASK 0x08
211 #define CURRENT_LIMIT_200_QUERY_SWITCH_OK 0x00
212 #define CURRENT_LIMIT_400_QUERY_SWITCH_OK 0x01
213 #define CURRENT_LIMIT_600_QUERY_SWITCH_OK 0x02
214 #define CURRENT_LIMIT_800_QUERY_SWITCH_OK 0x03
216 #define CURRENT_LIMIT_200_SWITCH_BUSY 0x01
217 #define CURRENT_LIMIT_400_SWITCH_BUSY 0x02
218 #define CURRENT_LIMIT_600_SWITCH_BUSY 0x04
219 #define CURRENT_LIMIT_800_SWITCH_BUSY 0x08
221 #define FUNCTION_GROUP4_SUPPORT_OFFSET 0x07
222 #define FUNCTION_GROUP4_QUERY_SWITCH_OFFSET 0x0F
223 #define FUNCTION_GROUP4_CHECK_BUSY_OFFSET 0x17
225 #define DATA_STRUCTURE_VER_OFFSET 0x11
229 #define MMC_8BIT_BUS 0x0010
230 #define MMC_4BIT_BUS 0x0020
232 #define MMC_SWITCH_ERR 0x80
240 #define CHANGE_TX 0x00
241 #define CHANGE_RX 0x01
243 #define DCM_HIGH_FREQUENCY_MODE 0x00
244 #define DCM_LOW_FREQUENCY_MODE 0x01
246 #define DCM_HIGH_FREQUENCY_MODE_SET 0x0C
247 #define DCM_Low_FREQUENCY_MODE_SET 0x00
249 #define MULTIPLY_BY_1 0x00
250 #define MULTIPLY_BY_2 0x01
251 #define MULTIPLY_BY_3 0x02
252 #define MULTIPLY_BY_4 0x03
253 #define MULTIPLY_BY_5 0x04
254 #define MULTIPLY_BY_6 0x05
255 #define MULTIPLY_BY_7 0x06
256 #define MULTIPLY_BY_8 0x07
257 #define MULTIPLY_BY_9 0x08
258 #define MULTIPLY_BY_10 0x09
260 #define DIVIDE_BY_2 0x01
261 #define DIVIDE_BY_3 0x02
262 #define DIVIDE_BY_4 0x03
263 #define DIVIDE_BY_5 0x04
264 #define DIVIDE_BY_6 0x05
265 #define DIVIDE_BY_7 0x06
266 #define DIVIDE_BY_8 0x07
267 #define DIVIDE_BY_9 0x08
268 #define DIVIDE_BY_10 0x09
270 struct timing_phase_path
{
277 int sd_select_card(struct rtsx_chip
*chip
, int select
);
278 int sd_pull_ctl_enable(struct rtsx_chip
*chip
);
279 int reset_sd_card(struct rtsx_chip
*chip
);
280 int sd_switch_clock(struct rtsx_chip
*chip
);
281 void sd_stop_seq_mode(struct rtsx_chip
*chip
);
282 int sd_rw(struct scsi_cmnd
*srb
, struct rtsx_chip
*chip
,
283 u32 start_sector
, u16 sector_cnt
);
284 void sd_cleanup_work(struct rtsx_chip
*chip
);
285 int sd_power_off_card3v3(struct rtsx_chip
*chip
);
286 int release_sd_card(struct rtsx_chip
*chip
);
288 int soft_reset_sd_card(struct rtsx_chip
*chip
);
289 int ext_sd_send_cmd_get_rsp(struct rtsx_chip
*chip
, u8 cmd_idx
,
290 u32 arg
, u8 rsp_type
, u8
*rsp
, int rsp_len
, int special_check
);
291 int ext_sd_get_rsp(struct rtsx_chip
*chip
, int len
, u8
*rsp
, u8 rsp_type
);
293 int sd_pass_thru_mode(struct scsi_cmnd
*srb
, struct rtsx_chip
*chip
);
294 int sd_execute_no_data(struct scsi_cmnd
*srb
, struct rtsx_chip
*chip
);
295 int sd_execute_read_data(struct scsi_cmnd
*srb
, struct rtsx_chip
*chip
);
296 int sd_execute_write_data(struct scsi_cmnd
*srb
, struct rtsx_chip
*chip
);
297 int sd_get_cmd_rsp(struct scsi_cmnd
*srb
, struct rtsx_chip
*chip
);
298 int sd_hw_rst(struct scsi_cmnd
*srb
, struct rtsx_chip
*chip
);
301 #endif /* __REALTEK_RTSX_SD_H */