2 * BCM47XX MTD partitioning
4 * Copyright © 2012 Rafał Miłecki <zajec5@gmail.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/slab.h>
15 #include <linux/mtd/mtd.h>
16 #include <linux/mtd/partitions.h>
18 #include <uapi/linux/magic.h>
21 * NAND flash on Netgear R6250 was verified to contain 15 partitions.
22 * This will result in allocating too big array for some old devices, but the
23 * memory will be freed soon anyway (see mtd_device_parse_register).
25 #define BCM47XXPART_MAX_PARTS 20
28 * Amount of bytes we read when analyzing each block of flash memory.
29 * Set it big enough to allow detecting partition and reading important data.
31 #define BCM47XXPART_BYTES_TO_READ 0x4e8
34 #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
35 #define BOARD_DATA_MAGIC2 0xBD0D0BBD
36 #define CFE_MAGIC 0x43464531 /* 1EFC */
37 #define FACTORY_MAGIC 0x59544346 /* FCTY */
38 #define NVRAM_HEADER 0x48534C46 /* FLSH */
39 #define POT_MAGIC1 0x54544f50 /* POTT */
40 #define POT_MAGIC2 0x504f /* OP */
41 #define ML_MAGIC1 0x39685a42
42 #define ML_MAGIC2 0x26594131
43 #define TRX_MAGIC 0x30524448
44 #define SHSQ_MAGIC 0x71736873 /* shsq (weird ZTE H218N endianness) */
45 #define UBI_EC_MAGIC 0x23494255 /* UBI# */
56 static void bcm47xxpart_add_part(struct mtd_partition
*part
, const char *name
,
57 u64 offset
, uint32_t mask_flags
)
60 part
->offset
= offset
;
61 part
->mask_flags
= mask_flags
;
64 static const char *bcm47xxpart_trx_data_part_name(struct mtd_info
*master
,
70 if (mtd_read(master
, offset
, sizeof(buf
), &bytes_read
,
71 (uint8_t *)&buf
) < 0) {
72 pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
77 if (buf
== UBI_EC_MAGIC
)
84 static int bcm47xxpart_parse(struct mtd_info
*master
,
85 struct mtd_partition
**pparts
,
86 struct mtd_part_parser_data
*data
)
88 struct mtd_partition
*parts
;
89 uint8_t i
, curr_part
= 0;
93 uint32_t blocksize
= master
->erasesize
;
94 struct trx_header
*trx
;
96 int last_trx_part
= -1;
97 int possible_nvram_sizes
[] = { 0x8000, 0xF000, 0x10000, };
100 * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
101 * partitions were aligned to at least 0x1000 anyway.
103 if (blocksize
< 0x1000)
107 parts
= kzalloc(sizeof(struct mtd_partition
) * BCM47XXPART_MAX_PARTS
,
112 buf
= kzalloc(BCM47XXPART_BYTES_TO_READ
, GFP_KERNEL
);
118 /* Parse block by block looking for magics */
119 for (offset
= 0; offset
<= master
->size
- blocksize
;
120 offset
+= blocksize
) {
121 /* Nothing more in higher memory */
122 if (offset
>= 0x2000000)
125 if (curr_part
>= BCM47XXPART_MAX_PARTS
) {
126 pr_warn("Reached maximum number of partitions, scanning stopped!\n");
130 /* Read beginning of the block */
131 if (mtd_read(master
, offset
, BCM47XXPART_BYTES_TO_READ
,
132 &bytes_read
, (uint8_t *)buf
) < 0) {
133 pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
138 /* Magic or small NVRAM at 0x400 */
139 if ((buf
[0x4e0 / 4] == CFE_MAGIC
&& buf
[0x4e4 / 4] == CFE_MAGIC
) ||
140 (buf
[0x400 / 4] == NVRAM_HEADER
)) {
141 bcm47xxpart_add_part(&parts
[curr_part
++], "boot",
142 offset
, MTD_WRITEABLE
);
147 * board_data starts with board_id which differs across boards,
148 * but we can use 'MPFR' (hopefully) magic at 0x100
150 if (buf
[0x100 / 4] == BOARD_DATA_MAGIC
) {
151 bcm47xxpart_add_part(&parts
[curr_part
++], "board_data",
152 offset
, MTD_WRITEABLE
);
156 /* Found on Huawei E970 */
157 if (buf
[0x000 / 4] == FACTORY_MAGIC
) {
158 bcm47xxpart_add_part(&parts
[curr_part
++], "factory",
159 offset
, MTD_WRITEABLE
);
164 if (buf
[0x000 / 4] == POT_MAGIC1
&&
165 (buf
[0x004 / 4] & 0xFFFF) == POT_MAGIC2
) {
166 bcm47xxpart_add_part(&parts
[curr_part
++], "POT", offset
,
172 if (buf
[0x010 / 4] == ML_MAGIC1
&&
173 buf
[0x014 / 4] == ML_MAGIC2
) {
174 bcm47xxpart_add_part(&parts
[curr_part
++], "ML", offset
,
180 if (buf
[0x000 / 4] == TRX_MAGIC
) {
181 if (BCM47XXPART_MAX_PARTS
- curr_part
< 4) {
182 pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
186 trx
= (struct trx_header
*)buf
;
188 trx_part
= curr_part
;
189 bcm47xxpart_add_part(&parts
[curr_part
++], "firmware",
193 /* We have LZMA loader if offset[2] points to sth */
194 if (trx
->offset
[2]) {
195 bcm47xxpart_add_part(&parts
[curr_part
++],
197 offset
+ trx
->offset
[i
],
202 if (trx
->offset
[i
]) {
203 bcm47xxpart_add_part(&parts
[curr_part
++],
205 offset
+ trx
->offset
[i
],
211 * Pure rootfs size is known and can be calculated as:
212 * trx->length - trx->offset[i]. We don't fill it as
213 * we want to have jffs2 (overlay) in the same mtd.
215 if (trx
->offset
[i
]) {
218 name
= bcm47xxpart_trx_data_part_name(master
, offset
+ trx
->offset
[i
]);
219 bcm47xxpart_add_part(&parts
[curr_part
++],
221 offset
+ trx
->offset
[i
],
226 last_trx_part
= curr_part
- 1;
229 * We have whole TRX scanned, skip to the next part. Use
230 * roundown (not roundup), as the loop will increase
231 * offset in next step.
233 offset
= rounddown(offset
+ trx
->length
, blocksize
);
237 /* Squashfs on devices not using TRX */
238 if (le32_to_cpu(buf
[0x000 / 4]) == SQUASHFS_MAGIC
||
239 buf
[0x000 / 4] == SHSQ_MAGIC
) {
240 bcm47xxpart_add_part(&parts
[curr_part
++], "rootfs",
246 * New (ARM?) devices may have NVRAM in some middle block. Last
247 * block will be checked later, so skip it.
249 if (offset
!= master
->size
- blocksize
&&
250 buf
[0x000 / 4] == NVRAM_HEADER
) {
251 bcm47xxpart_add_part(&parts
[curr_part
++], "nvram",
256 /* Read middle of the block */
257 if (mtd_read(master
, offset
+ 0x8000, 0x4,
258 &bytes_read
, (uint8_t *)buf
) < 0) {
259 pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
264 /* Some devices (ex. WNDR3700v3) don't have a standard 'MPFR' */
265 if (buf
[0x000 / 4] == BOARD_DATA_MAGIC2
) {
266 bcm47xxpart_add_part(&parts
[curr_part
++], "board_data",
267 offset
, MTD_WRITEABLE
);
272 /* Look for NVRAM at the end of the last block. */
273 for (i
= 0; i
< ARRAY_SIZE(possible_nvram_sizes
); i
++) {
274 if (curr_part
>= BCM47XXPART_MAX_PARTS
) {
275 pr_warn("Reached maximum number of partitions, scanning stopped!\n");
279 offset
= master
->size
- possible_nvram_sizes
[i
];
280 if (mtd_read(master
, offset
, 0x4, &bytes_read
,
281 (uint8_t *)buf
) < 0) {
282 pr_err("mtd_read error while reading at offset 0x%X!\n",
288 if (buf
[0] == NVRAM_HEADER
) {
289 bcm47xxpart_add_part(&parts
[curr_part
++], "nvram",
290 master
->size
- blocksize
, 0);
298 * Assume that partitions end at the beginning of the one they are
301 for (i
= 0; i
< curr_part
; i
++) {
302 u64 next_part_offset
= (i
< curr_part
- 1) ?
303 parts
[i
+ 1].offset
: master
->size
;
305 parts
[i
].size
= next_part_offset
- parts
[i
].offset
;
306 if (i
== last_trx_part
&& trx_part
>= 0)
307 parts
[trx_part
].size
= next_part_offset
-
308 parts
[trx_part
].offset
;
315 static struct mtd_part_parser bcm47xxpart_mtd_parser
= {
316 .owner
= THIS_MODULE
,
317 .parse_fn
= bcm47xxpart_parse
,
318 .name
= "bcm47xxpart",
321 static int __init
bcm47xxpart_init(void)
323 register_mtd_parser(&bcm47xxpart_mtd_parser
);
327 static void __exit
bcm47xxpart_exit(void)
329 deregister_mtd_parser(&bcm47xxpart_mtd_parser
);
332 module_init(bcm47xxpart_init
);
333 module_exit(bcm47xxpart_exit
);
335 MODULE_LICENSE("GPL");
336 MODULE_DESCRIPTION("MTD partitioning for BCM47XX flash memories");