1 // SPDX-License-Identifier: GPL-2.0
3 * Jailhouse paravirt_ops implementation
5 * Copyright (c) Siemens AG, 2015-2017
8 * Jan Kiszka <jan.kiszka@siemens.com>
11 #include <linux/acpi_pmtmr.h>
12 #include <linux/kernel.h>
13 #include <linux/reboot.h>
16 #include <asm/hypervisor.h>
17 #include <asm/i8259.h>
18 #include <asm/irqdomain.h>
19 #include <asm/pci_x86.h>
20 #include <asm/reboot.h>
21 #include <asm/setup.h>
23 static __initdata
struct jailhouse_setup_data setup_data
;
24 static unsigned int precalibrated_tsc_khz
;
26 static uint32_t jailhouse_cpuid_base(void)
28 if (boot_cpu_data
.cpuid_level
< 0 ||
29 !boot_cpu_has(X86_FEATURE_HYPERVISOR
))
32 return hypervisor_cpuid_base("Jailhouse\0\0\0", 0);
35 static uint32_t __init
jailhouse_detect(void)
37 return jailhouse_cpuid_base();
40 static void jailhouse_get_wallclock(struct timespec64
*now
)
42 memset(now
, 0, sizeof(*now
));
45 static void __init
jailhouse_timer_init(void)
47 lapic_timer_frequency
= setup_data
.apic_khz
* (1000 / HZ
);
50 static unsigned long jailhouse_get_tsc(void)
52 return precalibrated_tsc_khz
;
55 static void __init
jailhouse_x2apic_init(void)
57 #ifdef CONFIG_X86_X2APIC
58 if (!x2apic_enabled())
61 * We do not have access to IR inside Jailhouse non-root cells. So
62 * we have to run in physical mode.
66 * This will trigger the switch to apic_x2apic_phys. Empty OEM IDs
67 * ensure that only this APIC driver picks up the call.
69 default_acpi_madt_oem_check("", "");
73 static void __init
jailhouse_get_smp_config(unsigned int early
)
75 struct ioapic_domain_cfg ioapic_cfg
= {
76 .type
= IOAPIC_DOMAIN_STRICT
,
77 .ops
= &mp_ioapic_irqdomain_ops
,
79 struct mpc_intsrc mp_irq
= {
82 .irqflag
= MP_IRQPOL_ACTIVE_HIGH
| MP_IRQTRIG_EDGE
,
86 jailhouse_x2apic_init();
88 register_lapic_address(0xfee00000);
90 for (cpu
= 0; cpu
< setup_data
.num_cpus
; cpu
++) {
91 generic_processor_info(setup_data
.cpu_ids
[cpu
],
92 boot_cpu_apic_version
);
97 if (setup_data
.standard_ioapic
) {
98 mp_register_ioapic(0, 0xfec00000, gsi_top
, &ioapic_cfg
);
100 /* Register 1:1 mapping for legacy UART IRQs 3 and 4 */
101 mp_irq
.srcbusirq
= mp_irq
.dstirq
= 3;
102 mp_save_irq(&mp_irq
);
104 mp_irq
.srcbusirq
= mp_irq
.dstirq
= 4;
105 mp_save_irq(&mp_irq
);
109 static void jailhouse_no_restart(void)
111 pr_notice("Jailhouse: Restart not supported, halting\n");
115 static int __init
jailhouse_pci_arch_init(void)
120 * There are no bridges on the virtual PCI root bus under Jailhouse,
121 * thus no other way to discover all devices than a full scan.
122 * Respect any overrides via the command line, though.
124 if (pcibios_last_bus
< 0)
125 pcibios_last_bus
= 0xff;
127 #ifdef CONFIG_PCI_MMCONFIG
128 if (setup_data
.pci_mmconfig_base
) {
129 pci_mmconfig_add(0, 0, pcibios_last_bus
,
130 setup_data
.pci_mmconfig_base
);
131 pci_mmcfg_arch_init();
138 static void __init
jailhouse_init_platform(void)
140 u64 pa_data
= boot_params
.hdr
.setup_data
;
141 struct setup_data header
;
144 x86_init
.irqs
.pre_vector_init
= x86_init_noop
;
145 x86_init
.timers
.timer_init
= jailhouse_timer_init
;
146 x86_init
.mpparse
.get_smp_config
= jailhouse_get_smp_config
;
147 x86_init
.pci
.arch_init
= jailhouse_pci_arch_init
;
149 x86_platform
.calibrate_cpu
= jailhouse_get_tsc
;
150 x86_platform
.calibrate_tsc
= jailhouse_get_tsc
;
151 x86_platform
.get_wallclock
= jailhouse_get_wallclock
;
152 x86_platform
.legacy
.rtc
= 0;
153 x86_platform
.legacy
.warm_reset
= 0;
154 x86_platform
.legacy
.i8042
= X86_LEGACY_I8042_PLATFORM_ABSENT
;
156 legacy_pic
= &null_legacy_pic
;
158 machine_ops
.emergency_restart
= jailhouse_no_restart
;
161 mapping
= early_memremap(pa_data
, sizeof(header
));
162 memcpy(&header
, mapping
, sizeof(header
));
163 early_memunmap(mapping
, sizeof(header
));
165 if (header
.type
== SETUP_JAILHOUSE
&&
166 header
.len
>= sizeof(setup_data
)) {
167 pa_data
+= offsetof(struct setup_data
, data
);
169 mapping
= early_memremap(pa_data
, sizeof(setup_data
));
170 memcpy(&setup_data
, mapping
, sizeof(setup_data
));
171 early_memunmap(mapping
, sizeof(setup_data
));
176 pa_data
= header
.next
;
180 panic("Jailhouse: No valid setup data found");
182 if (setup_data
.compatible_version
> JAILHOUSE_SETUP_REQUIRED_VERSION
)
183 panic("Jailhouse: Unsupported setup data structure");
185 pmtmr_ioport
= setup_data
.pm_timer_address
;
186 pr_debug("Jailhouse: PM-Timer IO Port: %#x\n", pmtmr_ioport
);
188 precalibrated_tsc_khz
= setup_data
.tsc_khz
;
189 setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ
);
194 * Avoid that the kernel complains about missing ACPI tables - there
195 * are none in a non-root cell.
200 bool jailhouse_paravirt(void)
202 return jailhouse_cpuid_base() != 0;
205 static bool jailhouse_x2apic_available(void)
208 * The x2APIC is only available if the root cell enabled it. Jailhouse
209 * does not support switching between xAPIC and x2APIC.
211 return x2apic_enabled();
214 const struct hypervisor_x86 x86_hyper_jailhouse __refconst
= {
216 .detect
= jailhouse_detect
,
217 .init
.init_platform
= jailhouse_init_platform
,
218 .init
.x2apic_available
= jailhouse_x2apic_available
,