bus: mhi: core: Fix some error return code

[linux/fpc-iii.git] / fs / btrfs / delalloc-space.c

// SPDX-License-Identifier: GPL-2.0

#include "ctree.h"
#include "delalloc-space.h"
#include "block-rsv.h"
#include "btrfs_inode.h"
#include "space-info.h"
#include "transaction.h"
#include "qgroup.h"
#include "block-group.h"

/*
 * HOW DOES THIS WORK
 *
 * There are two stages to data reservations, one for data and one for metadata
 * to handle the new extents and checksums generated by writing data.
 *
 *
 * DATA RESERVATION
 *   The general flow of the data reservation is as follows
 *
 *   -> Reserve
 *     We call into btrfs_reserve_data_bytes() for the user request bytes that
 *     they wish to write.  We make this reservation and add it to
 *     space_info->bytes_may_use.  We set EXTENT_DELALLOC on the inode io_tree
 *     for the range and carry on if this is buffered, or follow up trying to
 *     make a real allocation if we are pre-allocating or doing O_DIRECT.
 *
 *   -> Use
 *     At writepages()/prealloc/O_DIRECT time we will call into
 *     btrfs_reserve_extent() for some part or all of this range of bytes.  We
 *     will make the allocation and subtract space_info->bytes_may_use by the
 *     original requested length and increase the space_info->bytes_reserved by
 *     the allocated length.  This distinction is important because compression
 *     may allocate a smaller on disk extent than we previously reserved.
 *
 *   -> Allocation
 *     finish_ordered_io() will insert the new file extent item for this range,
 *     and then add a delayed ref update for the extent tree.  Once that delayed
 *     ref is written the extent size is subtracted from
 *     space_info->bytes_reserved and added to space_info->bytes_used.
 *
 *   Error handling
 *
 *   -> By the reservation maker
 *     This is the simplest case, we haven't completed our operation and we know
 *     how much we reserved, we can simply call
 *     btrfs_free_reserved_data_space*() and it will be removed from
 *     space_info->bytes_may_use.
 *
 *   -> After the reservation has been made, but before cow_file_range()
 *     This is specifically for the delalloc case.  You must clear
 *     EXTENT_DELALLOC with the EXTENT_CLEAR_DATA_RESV bit, and the range will
 *     be subtracted from space_info->bytes_may_use.
 *
 * METADATA RESERVATION
 *   The general metadata reservation lifetimes are discussed elsewhere, this
 *   will just focus on how it is used for delalloc space.
 *
 *   We keep track of two things on a per inode bases
 *
 *   ->outstanding_extents
 *     This is the number of file extent items we'll need to handle all of the
 *     outstanding DELALLOC space we have in this inode.  We limit the maximum
 *     size of an extent, so a large contiguous dirty area may require more than
 *     one outstanding_extent, which is why count_max_extents() is used to
 *     determine how many outstanding_extents get added.
 *
 *   ->csum_bytes
 *     This is essentially how many dirty bytes we have for this inode, so we
 *     can calculate the number of checksum items we would have to add in order
 *     to checksum our outstanding data.
 *
 *   We keep a per-inode block_rsv in order to make it easier to keep track of
 *   our reservation.  We use btrfs_calculate_inode_block_rsv_size() to
 *   calculate the current theoretical maximum reservation we would need for the
 *   metadata for this inode.  We call this and then adjust our reservation as
 *   necessary, either by attempting to reserve more space, or freeing up excess
 *   space.
 *
 * OUTSTANDING_EXTENTS HANDLING
 *
 *  ->outstanding_extents is used for keeping track of how many extents we will
 *  need to use for this inode, and it will fluctuate depending on where you are
 *  in the life cycle of the dirty data.  Consider the following normal case for
 *  a completely clean inode, with a num_bytes < our maximum allowed extent size
 *
 *  -> reserve
 *    ->outstanding_extents += 1 (current value is 1)
 *
 *  -> set_delalloc
 *    ->outstanding_extents += 1 (currrent value is 2)
 *
 *  -> btrfs_delalloc_release_extents()
 *    ->outstanding_extents -= 1 (current value is 1)
 *
 *    We must call this once we are done, as we hold our reservation for the
 *    duration of our operation, and then assume set_delalloc will update the
 *    counter appropriately.
 *
 *  -> add ordered extent
 *    ->outstanding_extents += 1 (current value is 2)
 *
 *  -> btrfs_clear_delalloc_extent
 *    ->outstanding_extents -= 1 (current value is 1)
 *
 *  -> finish_ordered_io/btrfs_remove_ordered_extent
 *    ->outstanding_extents -= 1 (current value is 0)
 *
 *  Each stage is responsible for their own accounting of the extent, thus
 *  making error handling and cleanup easier.
 */

int btrfs_alloc_data_chunk_ondemand(struct btrfs_inode *inode, u64 bytes)
{
        struct btrfs_root *root = inode->root;
        struct btrfs_fs_info *fs_info = root->fs_info;
        struct btrfs_space_info *data_sinfo = fs_info->data_sinfo;
        u64 used;
        int ret = 0;
        int need_commit = 2;
        int have_pinned_space;

        /* Make sure bytes are sectorsize aligned */
        bytes = ALIGN(bytes, fs_info->sectorsize);

        if (btrfs_is_free_space_inode(inode)) {
                need_commit = 0;
                ASSERT(current->journal_info);
        }

again:
        /* Make sure we have enough space to handle the data first */
        spin_lock(&data_sinfo->lock);
        used = btrfs_space_info_used(data_sinfo, true);

        if (used + bytes > data_sinfo->total_bytes) {
                struct btrfs_trans_handle *trans;

                /*
                 * If we don't have enough free bytes in this space then we need
                 * to alloc a new chunk.
                 */
                if (!data_sinfo->full) {
                        u64 alloc_target;

                        data_sinfo->force_alloc = CHUNK_ALLOC_FORCE;
                        spin_unlock(&data_sinfo->lock);

                        alloc_target = btrfs_data_alloc_profile(fs_info);
                        /*
                         * It is ugly that we don't call nolock join
                         * transaction for the free space inode case here.
                         * But it is safe because we only do the data space
                         * reservation for the free space cache in the
                         * transaction context, the common join transaction
                         * just increase the counter of the current transaction
                         * handler, doesn't try to acquire the trans_lock of
                         * the fs.
                         */
                        trans = btrfs_join_transaction(root);
                        if (IS_ERR(trans))
                                return PTR_ERR(trans);

                        ret = btrfs_chunk_alloc(trans, alloc_target,
                                                CHUNK_ALLOC_NO_FORCE);
                        btrfs_end_transaction(trans);
                        if (ret < 0) {
                                if (ret != -ENOSPC)
                                        return ret;
                                else {
                                        have_pinned_space = 1;
                                        goto commit_trans;
                                }
                        }

                        goto again;
                }

                /*
                 * If we don't have enough pinned space to deal with this
                 * allocation, and no removed chunk in current transaction,
                 * don't bother committing the transaction.
                 */
                have_pinned_space = __percpu_counter_compare(
                        &data_sinfo->total_bytes_pinned,
                        used + bytes - data_sinfo->total_bytes,
                        BTRFS_TOTAL_BYTES_PINNED_BATCH);
                spin_unlock(&data_sinfo->lock);

                /* Commit the current transaction and try again */
commit_trans:
                if (need_commit) {
                        need_commit--;

                        if (need_commit > 0) {
                                btrfs_start_delalloc_roots(fs_info, -1);
                                btrfs_wait_ordered_roots(fs_info, U64_MAX, 0,
                                                         (u64)-1);
                        }

                        trans = btrfs_join_transaction(root);
                        if (IS_ERR(trans))
                                return PTR_ERR(trans);
                        if (have_pinned_space >= 0 ||
                            test_bit(BTRFS_TRANS_HAVE_FREE_BGS,
                                     &trans->transaction->flags) ||
                            need_commit > 0) {
                                ret = btrfs_commit_transaction(trans);
                                if (ret)
                                        return ret;
                                /*
                                 * The cleaner kthread might still be doing iput
                                 * operations. Wait for it to finish so that
                                 * more space is released.  We don't need to
                                 * explicitly run the delayed iputs here because
                                 * the commit_transaction would have woken up
                                 * the cleaner.
                                 */
                                ret = btrfs_wait_on_delayed_iputs(fs_info);
                                if (ret)
                                        return ret;
                                goto again;
                        } else {
                                btrfs_end_transaction(trans);
                        }
                }

                trace_btrfs_space_reservation(fs_info,
                                              "space_info:enospc",
                                              data_sinfo->flags, bytes, 1);
                return -ENOSPC;
        }
        btrfs_space_info_update_bytes_may_use(fs_info, data_sinfo, bytes);
        spin_unlock(&data_sinfo->lock);

        return 0;
}

int btrfs_check_data_free_space(struct inode *inode,
                        struct extent_changeset **reserved, u64 start, u64 len)
{
        struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
        int ret;

        /* align the range */
        len = round_up(start + len, fs_info->sectorsize) -
              round_down(start, fs_info->sectorsize);
        start = round_down(start, fs_info->sectorsize);

        ret = btrfs_alloc_data_chunk_ondemand(BTRFS_I(inode), len);
        if (ret < 0)
                return ret;

        /* Use new btrfs_qgroup_reserve_data to reserve precious data space. */
        ret = btrfs_qgroup_reserve_data(inode, reserved, start, len);
        if (ret < 0)
                btrfs_free_reserved_data_space_noquota(inode, start, len);
        else
                ret = 0;
        return ret;
}

/*
 * Called if we need to clear a data reservation for this inode
 * Normally in a error case.
 *
 * This one will *NOT* use accurate qgroup reserved space API, just for case
 * which we can't sleep and is sure it won't affect qgroup reserved space.
 * Like clear_bit_hook().
 */
void btrfs_free_reserved_data_space_noquota(struct inode *inode, u64 start,
                                            u64 len)
{
        struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
        struct btrfs_space_info *data_sinfo;

        /* Make sure the range is aligned to sectorsize */
        len = round_up(start + len, fs_info->sectorsize) -
              round_down(start, fs_info->sectorsize);
        start = round_down(start, fs_info->sectorsize);

        data_sinfo = fs_info->data_sinfo;
        spin_lock(&data_sinfo->lock);
        btrfs_space_info_update_bytes_may_use(fs_info, data_sinfo, -len);
        spin_unlock(&data_sinfo->lock);
}

/*
 * Called if we need to clear a data reservation for this inode
 * Normally in a error case.
 *
 * This one will handle the per-inode data rsv map for accurate reserved
 * space framework.
 */
void btrfs_free_reserved_data_space(struct inode *inode,
                        struct extent_changeset *reserved, u64 start, u64 len)
{
        struct btrfs_root *root = BTRFS_I(inode)->root;

        /* Make sure the range is aligned to sectorsize */
        len = round_up(start + len, root->fs_info->sectorsize) -
              round_down(start, root->fs_info->sectorsize);
        start = round_down(start, root->fs_info->sectorsize);

        btrfs_free_reserved_data_space_noquota(inode, start, len);
        btrfs_qgroup_free_data(inode, reserved, start, len);
}

/**
 * btrfs_inode_rsv_release - release any excessive reservation.
 * @inode - the inode we need to release from.
 * @qgroup_free - free or convert qgroup meta.
 *   Unlike normal operation, qgroup meta reservation needs to know if we are
 *   freeing qgroup reservation or just converting it into per-trans.  Normally
 *   @qgroup_free is true for error handling, and false for normal release.
 *
 * This is the same as btrfs_block_rsv_release, except that it handles the
 * tracepoint for the reservation.
 */
static void btrfs_inode_rsv_release(struct btrfs_inode *inode, bool qgroup_free)
{
        struct btrfs_fs_info *fs_info = inode->root->fs_info;
        struct btrfs_block_rsv *block_rsv = &inode->block_rsv;
        u64 released = 0;
        u64 qgroup_to_release = 0;

        /*
         * Since we statically set the block_rsv->size we just want to say we
         * are releasing 0 bytes, and then we'll just get the reservation over
         * the size free'd.
         */
        released = btrfs_block_rsv_release(fs_info, block_rsv, 0,
                                           &qgroup_to_release);
        if (released > 0)
                trace_btrfs_space_reservation(fs_info, "delalloc",
                                              btrfs_ino(inode), released, 0);
        if (qgroup_free)
                btrfs_qgroup_free_meta_prealloc(inode->root, qgroup_to_release);
        else
                btrfs_qgroup_convert_reserved_meta(inode->root,
                                                   qgroup_to_release);
}

static void btrfs_calculate_inode_block_rsv_size(struct btrfs_fs_info *fs_info,
                                                 struct btrfs_inode *inode)
{
        struct btrfs_block_rsv *block_rsv = &inode->block_rsv;
        u64 reserve_size = 0;
        u64 qgroup_rsv_size = 0;
        u64 csum_leaves;
        unsigned outstanding_extents;

        lockdep_assert_held(&inode->lock);
        outstanding_extents = inode->outstanding_extents;

        /*
         * Insert size for the number of outstanding extents, 1 normal size for
         * updating the inode.
         */
        if (outstanding_extents) {
                reserve_size = btrfs_calc_insert_metadata_size(fs_info,
                                                outstanding_extents);
                reserve_size += btrfs_calc_metadata_size(fs_info, 1);
        }
        csum_leaves = btrfs_csum_bytes_to_leaves(fs_info,
                                                 inode->csum_bytes);
        reserve_size += btrfs_calc_insert_metadata_size(fs_info,
                                                        csum_leaves);
        /*
         * For qgroup rsv, the calculation is very simple:
         * account one nodesize for each outstanding extent
         *
         * This is overestimating in most cases.
         */
        qgroup_rsv_size = (u64)outstanding_extents * fs_info->nodesize;

        spin_lock(&block_rsv->lock);
        block_rsv->size = reserve_size;
        block_rsv->qgroup_rsv_size = qgroup_rsv_size;
        spin_unlock(&block_rsv->lock);
}

static void calc_inode_reservations(struct btrfs_fs_info *fs_info,
                                    u64 num_bytes, u64 *meta_reserve,
                                    u64 *qgroup_reserve)
{
        u64 nr_extents = count_max_extents(num_bytes);
        u64 csum_leaves = btrfs_csum_bytes_to_leaves(fs_info, num_bytes);
        u64 inode_update = btrfs_calc_metadata_size(fs_info, 1);

        *meta_reserve = btrfs_calc_insert_metadata_size(fs_info,
                                                nr_extents + csum_leaves);

        /*
         * finish_ordered_io has to update the inode, so add the space required
         * for an inode update.
         */
        *meta_reserve += inode_update;
        *qgroup_reserve = nr_extents * fs_info->nodesize;
}

int btrfs_delalloc_reserve_metadata(struct btrfs_inode *inode, u64 num_bytes)
{
        struct btrfs_root *root = inode->root;
        struct btrfs_fs_info *fs_info = root->fs_info;
        struct btrfs_block_rsv *block_rsv = &inode->block_rsv;
        u64 meta_reserve, qgroup_reserve;
        unsigned nr_extents;
        enum btrfs_reserve_flush_enum flush = BTRFS_RESERVE_FLUSH_ALL;
        int ret = 0;

        /*
         * If we are a free space inode we need to not flush since we will be in
         * the middle of a transaction commit.  We also don't need the delalloc
         * mutex since we won't race with anybody.  We need this mostly to make
         * lockdep shut its filthy mouth.
         *
         * If we have a transaction open (can happen if we call truncate_block
         * from truncate), then we need FLUSH_LIMIT so we don't deadlock.
         */
        if (btrfs_is_free_space_inode(inode)) {
                flush = BTRFS_RESERVE_NO_FLUSH;
        } else {
                if (current->journal_info)
                        flush = BTRFS_RESERVE_FLUSH_LIMIT;

                if (btrfs_transaction_in_commit(fs_info))
                        schedule_timeout(1);
        }

        num_bytes = ALIGN(num_bytes, fs_info->sectorsize);

        /*
         * We always want to do it this way, every other way is wrong and ends
         * in tears.  Pre-reserving the amount we are going to add will always
         * be the right way, because otherwise if we have enough parallelism we
         * could end up with thousands of inodes all holding little bits of
         * reservations they were able to make previously and the only way to
         * reclaim that space is to ENOSPC out the operations and clear
         * everything out and try again, which is bad.  This way we just
         * over-reserve slightly, and clean up the mess when we are done.
         */
        calc_inode_reservations(fs_info, num_bytes, &meta_reserve,
                                &qgroup_reserve);
        ret = btrfs_qgroup_reserve_meta_prealloc(root, qgroup_reserve, true);
        if (ret)
                return ret;
        ret = btrfs_reserve_metadata_bytes(root, block_rsv, meta_reserve, flush);
        if (ret) {
                btrfs_qgroup_free_meta_prealloc(root, qgroup_reserve);
                return ret;
        }

        /*
         * Now we need to update our outstanding extents and csum bytes _first_
         * and then add the reservation to the block_rsv.  This keeps us from
         * racing with an ordered completion or some such that would think it
         * needs to free the reservation we just made.
         */
        spin_lock(&inode->lock);
        nr_extents = count_max_extents(num_bytes);
        btrfs_mod_outstanding_extents(inode, nr_extents);
        inode->csum_bytes += num_bytes;
        btrfs_calculate_inode_block_rsv_size(fs_info, inode);
        spin_unlock(&inode->lock);

        /* Now we can safely add our space to our block rsv */
        btrfs_block_rsv_add_bytes(block_rsv, meta_reserve, false);
        trace_btrfs_space_reservation(root->fs_info, "delalloc",
                                      btrfs_ino(inode), meta_reserve, 1);

        spin_lock(&block_rsv->lock);
        block_rsv->qgroup_rsv_reserved += qgroup_reserve;
        spin_unlock(&block_rsv->lock);

        return 0;
}

/**
 * btrfs_delalloc_release_metadata - release a metadata reservation for an inode
 * @inode: the inode to release the reservation for.
 * @num_bytes: the number of bytes we are releasing.
 * @qgroup_free: free qgroup reservation or convert it to per-trans reservation
 *
 * This will release the metadata reservation for an inode.  This can be called
 * once we complete IO for a given set of bytes to release their metadata
 * reservations, or on error for the same reason.
 */
void btrfs_delalloc_release_metadata(struct btrfs_inode *inode, u64 num_bytes,
                                     bool qgroup_free)
{
        struct btrfs_fs_info *fs_info = inode->root->fs_info;

        num_bytes = ALIGN(num_bytes, fs_info->sectorsize);
        spin_lock(&inode->lock);
        inode->csum_bytes -= num_bytes;
        btrfs_calculate_inode_block_rsv_size(fs_info, inode);
        spin_unlock(&inode->lock);

        if (btrfs_is_testing(fs_info))
                return;

        btrfs_inode_rsv_release(inode, qgroup_free);
}

/**
 * btrfs_delalloc_release_extents - release our outstanding_extents
 * @inode: the inode to balance the reservation for.
 * @num_bytes: the number of bytes we originally reserved with
 *
 * When we reserve space we increase outstanding_extents for the extents we may
 * add.  Once we've set the range as delalloc or created our ordered extents we
 * have outstanding_extents to track the real usage, so we use this to free our
 * temporarily tracked outstanding_extents.  This _must_ be used in conjunction
 * with btrfs_delalloc_reserve_metadata.
 */
void btrfs_delalloc_release_extents(struct btrfs_inode *inode, u64 num_bytes)
{
        struct btrfs_fs_info *fs_info = inode->root->fs_info;
        unsigned num_extents;

        spin_lock(&inode->lock);
        num_extents = count_max_extents(num_bytes);
        btrfs_mod_outstanding_extents(inode, -num_extents);
        btrfs_calculate_inode_block_rsv_size(fs_info, inode);
        spin_unlock(&inode->lock);

        if (btrfs_is_testing(fs_info))
                return;

        btrfs_inode_rsv_release(inode, true);
}

/**
 * btrfs_delalloc_reserve_space - reserve data and metadata space for
 * delalloc
 * @inode: inode we're writing to
 * @start: start range we are writing to
 * @len: how long the range we are writing to
 * @reserved: mandatory parameter, record actually reserved qgroup ranges of
 *            current reservation.
 *
 * This will do the following things
 *
 * - reserve space in data space info for num bytes
 *   and reserve precious corresponding qgroup space
 *   (Done in check_data_free_space)
 *
 * - reserve space for metadata space, based on the number of outstanding
 *   extents and how much csums will be needed
 *   also reserve metadata space in a per root over-reserve method.
 * - add to the inodes->delalloc_bytes
 * - add it to the fs_info's delalloc inodes list.
 *   (Above 3 all done in delalloc_reserve_metadata)
 *
 * Return 0 for success
 * Return <0 for error(-ENOSPC or -EQUOT)
 */
int btrfs_delalloc_reserve_space(struct inode *inode,
                        struct extent_changeset **reserved, u64 start, u64 len)
{
        int ret;

        ret = btrfs_check_data_free_space(inode, reserved, start, len);
        if (ret < 0)
                return ret;
        ret = btrfs_delalloc_reserve_metadata(BTRFS_I(inode), len);
        if (ret < 0)
                btrfs_free_reserved_data_space(inode, *reserved, start, len);
        return ret;
}

/**
 * btrfs_delalloc_release_space - release data and metadata space for delalloc
 * @inode: inode we're releasing space for
 * @start: start position of the space already reserved
 * @len: the len of the space already reserved
 * @release_bytes: the len of the space we consumed or didn't use
 *
 * This function will release the metadata space that was not used and will
 * decrement ->delalloc_bytes and remove it from the fs_info delalloc_inodes
 * list if there are no delalloc bytes left.
 * Also it will handle the qgroup reserved space.
 */
void btrfs_delalloc_release_space(struct inode *inode,
                                  struct extent_changeset *reserved,
                                  u64 start, u64 len, bool qgroup_free)
{
        btrfs_delalloc_release_metadata(BTRFS_I(inode), len, qgroup_free);
        btrfs_free_reserved_data_space(inode, reserved, start, len);
}