2 * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
4 * Copyright (C) 2009 Li-Pro.Net
5 * Stephan Linz <linz@li-pro.net>
7 * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/kernel.h>
15 #include <linux/platform_device.h>
16 #include <linux/gpio.h>
17 #include <linux/delay.h>
18 #include <linux/interrupt.h>
20 #include <linux/smsc911x.h>
22 #include <plat/board.h>
23 #include <plat/gpmc.h>
24 #include <plat/gpmc-smsc911x.h>
26 static struct omap_smsc911x_platform_data
*gpmc_cfg
;
28 static struct resource gpmc_smsc911x_resources
[] = {
30 .flags
= IORESOURCE_MEM
,
33 .flags
= IORESOURCE_IRQ
,
37 static struct smsc911x_platform_config gpmc_smsc911x_config
= {
38 .phy_interface
= PHY_INTERFACE_MODE_MII
,
39 .irq_polarity
= SMSC911X_IRQ_POLARITY_ACTIVE_LOW
,
40 .irq_type
= SMSC911X_IRQ_TYPE_OPEN_DRAIN
,
41 .flags
= SMSC911X_USE_16BIT
,
44 static struct platform_device gpmc_smsc911x_device
= {
47 .num_resources
= ARRAY_SIZE(gpmc_smsc911x_resources
),
48 .resource
= gpmc_smsc911x_resources
,
50 .platform_data
= &gpmc_smsc911x_config
,
55 * Initialize smsc911x device connected to the GPMC. Note that we
56 * assume that pin multiplexing is done in the board-*.c file,
57 * or in the bootloader.
59 void __init
gpmc_smsc911x_init(struct omap_smsc911x_platform_data
*board_data
)
61 unsigned long cs_mem_base
;
64 gpmc_cfg
= board_data
;
66 if (gpmc_cs_request(gpmc_cfg
->cs
, SZ_16M
, &cs_mem_base
) < 0) {
67 printk(KERN_ERR
"Failed to request GPMC mem for smsc911x\n");
71 gpmc_smsc911x_resources
[0].start
= cs_mem_base
+ 0x0;
72 gpmc_smsc911x_resources
[0].end
= cs_mem_base
+ 0xff;
74 if (gpio_request(gpmc_cfg
->gpio_irq
, "smsc911x irq") < 0) {
75 printk(KERN_ERR
"Failed to request GPIO%d for smsc911x IRQ\n",
80 gpio_direction_input(gpmc_cfg
->gpio_irq
);
81 gpmc_smsc911x_resources
[1].start
= gpio_to_irq(gpmc_cfg
->gpio_irq
);
82 gpmc_smsc911x_resources
[1].flags
|=
83 (gpmc_cfg
->flags
& IRQF_TRIGGER_MASK
);
85 if (gpio_is_valid(gpmc_cfg
->gpio_reset
)) {
86 ret
= gpio_request(gpmc_cfg
->gpio_reset
, "smsc911x reset");
88 printk(KERN_ERR
"Failed to request GPIO%d for smsc911x reset\n",
89 gpmc_cfg
->gpio_reset
);
93 gpio_direction_output(gpmc_cfg
->gpio_reset
, 1);
94 gpio_set_value(gpmc_cfg
->gpio_reset
, 0);
96 gpio_set_value(gpmc_cfg
->gpio_reset
, 1);
99 if (platform_device_register(&gpmc_smsc911x_device
) < 0) {
100 printk(KERN_ERR
"Unable to register smsc911x device\n");
101 gpio_free(gpmc_cfg
->gpio_reset
);
108 gpio_free(gpmc_cfg
->gpio_irq
);
110 gpmc_cs_free(gpmc_cfg
->cs
);
112 printk(KERN_ERR
"Could not initialize smsc911x\n");