3 * Copyright (c) 2011, Microsoft Corporation.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
19 * Haiyang Zhang <haiyangz@microsoft.com>
20 * Hank Janssen <hjanssen@microsoft.com>
21 * K. Y. Srinivasan <kys@microsoft.com>
25 #ifndef _HYPERV_VMBUS_H
26 #define _HYPERV_VMBUS_H
28 #include <linux/list.h>
29 #include <asm/sync_bitops.h>
30 #include <linux/atomic.h>
31 #include <linux/hyperv.h>
32 #include <linux/interrupt.h>
37 * Timeout for services such as KVP and fcopy.
39 #define HV_UTIL_TIMEOUT 30
42 * Timeout for guest-host handshake for services.
44 #define HV_UTIL_NEGO_TIMEOUT 55
46 /* Define synthetic interrupt controller flag constants. */
47 #define HV_EVENT_FLAGS_COUNT (256 * 8)
48 #define HV_EVENT_FLAGS_LONG_COUNT (256 / sizeof(unsigned long))
51 * Timer configuration register.
53 union hv_timer_config
{
67 /* Define the synthetic interrupt controller event flags format. */
68 union hv_synic_event_flags
{
69 unsigned long flags
[HV_EVENT_FLAGS_LONG_COUNT
];
72 /* Define SynIC control register. */
73 union hv_synic_scontrol
{
81 /* Define synthetic interrupt source. */
93 /* Define the format of the SIMP register */
103 /* Define the format of the SIEFP register */
104 union hv_synic_siefp
{
109 u64 base_siefp_gpa
:52;
113 /* Definitions for the monitored notification facility */
114 union hv_monitor_trigger_group
{
122 struct hv_monitor_parameter
{
123 union hv_connection_id connectionid
;
128 union hv_monitor_trigger_state
{
137 /* struct hv_monitor_page Layout */
138 /* ------------------------------------------------------ */
139 /* | 0 | TriggerState (4 bytes) | Rsvd1 (4 bytes) | */
140 /* | 8 | TriggerGroup[0] | */
141 /* | 10 | TriggerGroup[1] | */
142 /* | 18 | TriggerGroup[2] | */
143 /* | 20 | TriggerGroup[3] | */
144 /* | 28 | Rsvd2[0] | */
145 /* | 30 | Rsvd2[1] | */
146 /* | 38 | Rsvd2[2] | */
147 /* | 40 | NextCheckTime[0][0] | NextCheckTime[0][1] | */
149 /* | 240 | Latency[0][0..3] | */
150 /* | 340 | Rsvz3[0] | */
151 /* | 440 | Parameter[0][0] | */
152 /* | 448 | Parameter[0][1] | */
154 /* | 840 | Rsvd4[0] | */
155 /* ------------------------------------------------------ */
156 struct hv_monitor_page
{
157 union hv_monitor_trigger_state trigger_state
;
160 union hv_monitor_trigger_group trigger_group
[4];
163 s32 next_checktime
[4][32];
168 struct hv_monitor_parameter parameter
[4][32];
173 #define HV_HYPERCALL_PARAM_ALIGN sizeof(u64)
175 /* Definition of the hv_post_message hypercall input structure. */
176 struct hv_input_post_message
{
177 union hv_connection_id connectionid
;
181 u64 payload
[HV_MESSAGE_PAYLOAD_QWORD_COUNT
];
186 VMBUS_MESSAGE_CONNECTION_ID
= 1,
187 VMBUS_MESSAGE_PORT_ID
= 1,
188 VMBUS_EVENT_CONNECTION_ID
= 2,
189 VMBUS_EVENT_PORT_ID
= 2,
190 VMBUS_MONITOR_CONNECTION_ID
= 3,
191 VMBUS_MONITOR_PORT_ID
= 3,
192 VMBUS_MESSAGE_SINT
= 2,
196 * Per cpu state for channel handling
198 struct hv_per_cpu_context
{
199 void *synic_message_page
;
200 void *synic_event_page
;
202 * buffer to post messages to the host.
207 * Starting with win8, we can take channel interrupts on any CPU;
208 * we will manage the tasklet that handles events messages on a per CPU
211 struct tasklet_struct msg_dpc
;
214 * To optimize the mapping of relid to channel, maintain
215 * per-cpu list of the channels based on their CPU affinity.
217 struct list_head chan_list
;
218 struct clock_event_device
*clk_evt
;
222 /* We only support running on top of Hyper-V
223 * So at this point this really can only contain the Hyper-V ID
229 bool synic_initialized
;
231 struct hv_per_cpu_context __percpu
*cpu_context
;
234 * To manage allocations in a NUMA node.
235 * Array indexed by numa node ID.
237 struct cpumask
*hv_numa_map
;
240 extern struct hv_context hv_context
;
244 extern int hv_init(void);
246 extern int hv_post_message(union hv_connection_id connection_id
,
247 enum hv_message_type message_type
,
248 void *payload
, size_t payload_size
);
250 extern int hv_synic_alloc(void);
252 extern void hv_synic_free(void);
254 extern int hv_synic_init(unsigned int cpu
);
256 extern int hv_synic_cleanup(unsigned int cpu
);
258 extern void hv_synic_clockevents_cleanup(void);
263 int hv_ringbuffer_init(struct hv_ring_buffer_info
*ring_info
,
264 struct page
*pages
, u32 pagecnt
);
266 void hv_ringbuffer_cleanup(struct hv_ring_buffer_info
*ring_info
);
268 int hv_ringbuffer_write(struct vmbus_channel
*channel
,
269 const struct kvec
*kv_list
, u32 kv_count
);
271 int hv_ringbuffer_read(struct vmbus_channel
*channel
,
272 void *buffer
, u32 buflen
, u32
*buffer_actual_len
,
273 u64
*requestid
, bool raw
);
276 * Maximum channels is determined by the size of the interrupt page
277 * which is PAGE_SIZE. 1/2 of PAGE_SIZE is for send endpoint interrupt
278 * and the other is receive endpoint interrupt
280 #define MAX_NUM_CHANNELS ((PAGE_SIZE >> 1) << 3) /* 16348 channels */
282 /* The value here must be in multiple of 32 */
283 /* TODO: Need to make this configurable */
284 #define MAX_NUM_CHANNELS_SUPPORTED 256
287 enum vmbus_connect_state
{
294 #define MAX_SIZE_CHANNEL_MESSAGE HV_MESSAGE_PAYLOAD_BYTE_COUNT
296 struct vmbus_connection
{
298 * CPU on which the initial host contact was made.
302 atomic_t offer_in_progress
;
304 enum vmbus_connect_state conn_state
;
306 atomic_t next_gpadl_handle
;
308 struct completion unload_event
;
310 * Represents channel interrupts. Each bit position represents a
311 * channel. When a channel sends an interrupt via VMBUS, it finds its
312 * bit in the sendInterruptPage, set it and calls Hv to generate a port
313 * event. The other end receives the port event and parse the
314 * recvInterruptPage to see which bit is set
321 * 2 pages - 1st page for parent->child notification and 2nd
322 * is child->parent notification
324 struct hv_monitor_page
*monitor_pages
[2];
325 struct list_head chn_msg_list
;
326 spinlock_t channelmsg_lock
;
328 /* List of channels */
329 struct list_head chn_list
;
330 struct mutex channel_mutex
;
332 struct workqueue_struct
*work_queue
;
336 struct vmbus_msginfo
{
337 /* Bookkeeping stuff */
338 struct list_head msglist_entry
;
340 /* The message itself */
341 unsigned char msg
[0];
345 extern struct vmbus_connection vmbus_connection
;
347 static inline void vmbus_send_interrupt(u32 relid
)
349 sync_set_bit(relid
, vmbus_connection
.send_int_page
);
352 enum vmbus_message_handler_type
{
353 /* The related handler can sleep. */
356 /* The related handler must NOT sleep. */
357 VMHT_NON_BLOCKING
= 1,
360 struct vmbus_channel_message_table_entry
{
361 enum vmbus_channel_message_type message_type
;
362 enum vmbus_message_handler_type handler_type
;
363 void (*message_handler
)(struct vmbus_channel_message_header
*msg
);
366 extern const struct vmbus_channel_message_table_entry
367 channel_message_table
[CHANNELMSG_COUNT
];
370 /* General vmbus interface */
372 struct hv_device
*vmbus_device_create(const uuid_le
*type
,
373 const uuid_le
*instance
,
374 struct vmbus_channel
*channel
);
376 int vmbus_device_register(struct hv_device
*child_device_obj
);
377 void vmbus_device_unregister(struct hv_device
*device_obj
);
378 int vmbus_add_channel_kobj(struct hv_device
*device_obj
,
379 struct vmbus_channel
*channel
);
381 struct vmbus_channel
*relid2channel(u32 relid
);
383 void vmbus_free_channels(void);
385 /* Connection interface */
387 int vmbus_connect(void);
388 void vmbus_disconnect(void);
390 int vmbus_post_msg(void *buffer
, size_t buflen
, bool can_sleep
);
392 void vmbus_on_event(unsigned long data
);
393 void vmbus_on_msg_dpc(unsigned long data
);
395 int hv_kvp_init(struct hv_util_service
*srv
);
396 void hv_kvp_deinit(void);
397 void hv_kvp_onchannelcallback(void *context
);
399 int hv_vss_init(struct hv_util_service
*srv
);
400 void hv_vss_deinit(void);
401 void hv_vss_onchannelcallback(void *context
);
403 int hv_fcopy_init(struct hv_util_service
*srv
);
404 void hv_fcopy_deinit(void);
405 void hv_fcopy_onchannelcallback(void *context
);
406 void vmbus_initiate_unload(bool crash
);
408 static inline void hv_poll_channel(struct vmbus_channel
*channel
,
414 if (in_interrupt() && (channel
->target_cpu
== smp_processor_id())) {
418 smp_call_function_single(channel
->target_cpu
, cb
, channel
, true);
421 enum hvutil_device_state
{
422 HVUTIL_DEVICE_INIT
= 0, /* driver is loaded, waiting for userspace */
423 HVUTIL_READY
, /* userspace is registered */
424 HVUTIL_HOSTMSG_RECEIVED
, /* message from the host was received */
425 HVUTIL_USERSPACE_REQ
, /* request to userspace was sent */
426 HVUTIL_USERSPACE_RECV
, /* reply from userspace was received */
427 HVUTIL_DEVICE_DYING
, /* driver unload is in progress */
430 #endif /* _HYPERV_VMBUS_H */