?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.16.11
[linux/fpc-iii.git] / drivers / isdn / hysdn / boardergo.c
blob2aa2a0e082471e48e8b7ffc5f8845cd03fb6d693
1 /* $Id: boardergo.c,v 1.5.6.7 2001/11/06 21:58:19 kai Exp $
2 *
3 * Linux driver for HYSDN cards, specific routines for ergo type boards.
4 *
5 * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH
6 * Copyright 1999 by Werner Cornelius (werner@titro.de)
7 *
8 * This software may be used and distributed according to the terms
9 * of the GNU General Public License, incorporated herein by reference.
10 *
11 * As all Linux supported cards Champ2, Ergo and Metro2/4 use the same
12 * DPRAM interface and layout with only minor differences all related
13 * stuff is done here, not in separate modules.
14 *
15 */
16
17 #include <linux/signal.h>
18 #include <linux/kernel.h>
19 #include <linux/ioport.h>
20 #include <linux/interrupt.h>
21 #include <linux/vmalloc.h>
22 #include <linux/delay.h>
23 #include <asm/io.h>
24
25 #include "hysdn_defs.h"
26 #include "boardergo.h"
27
28 #define byteout(addr, val) outb(val, addr)
29 #define bytein(addr) inb(addr)
30
31 /***************************************************/
32 /* The cards interrupt handler. Called from system */
33 /***************************************************/
34 static irqreturn_t
35 ergo_interrupt(int intno, void *dev_id)
36 {
37 hysdn_card *card = dev_id; /* parameter from irq */
38 tErgDpram *dpr;
39 unsigned long flags;
40 unsigned char volatile b;
41
42 if (!card)
43 return IRQ_NONE; /* error -> spurious interrupt */
44 if (!card->irq_enabled)
45 return IRQ_NONE; /* other device interrupting or irq switched off */
46
47 spin_lock_irqsave(&card->hysdn_lock, flags); /* no further irqs allowed */
48
49 if (!(bytein(card->iobase + PCI9050_INTR_REG) & PCI9050_INTR_REG_STAT1)) {
50 spin_unlock_irqrestore(&card->hysdn_lock, flags); /* restore old state */
51 return IRQ_NONE; /* no interrupt requested by E1 */
52 }
53 /* clear any pending ints on the board */
54 dpr = card->dpram;
55 b = dpr->ToPcInt; /* clear for ergo */
56 b |= dpr->ToPcIntMetro; /* same for metro */
57 b |= dpr->ToHyInt; /* and for champ */
58
59 /* start kernel task immediately after leaving all interrupts */
60 if (!card->hw_lock)
61 schedule_work(&card->irq_queue);
62 spin_unlock_irqrestore(&card->hysdn_lock, flags);
63 return IRQ_HANDLED;
64 } /* ergo_interrupt */
65
66 /******************************************************************************/
67 /* ergo_irq_bh will be called as part of the kernel clearing its shared work */
68 /* queue sometime after a call to schedule_work has been made passing our */
69 /* work_struct. This task is the only one handling data transfer from or to */
70 /* the card after booting. The task may be queued from everywhere */
71 /* (interrupts included). */
72 /******************************************************************************/
73 static void
74 ergo_irq_bh(struct work_struct *ugli_api)
75 {
76 hysdn_card *card = container_of(ugli_api, hysdn_card, irq_queue);
77 tErgDpram *dpr;
78 int again;
79 unsigned long flags;
80
81 if (card->state != CARD_STATE_RUN)
82 return; /* invalid call */
83
84 dpr = card->dpram; /* point to DPRAM */
85
86 spin_lock_irqsave(&card->hysdn_lock, flags);
87 if (card->hw_lock) {
88 spin_unlock_irqrestore(&card->hysdn_lock, flags); /* hardware currently unavailable */
89 return;
90 }
91 card->hw_lock = 1; /* we now lock the hardware */
92
93 do {
94 again = 0; /* assume loop not to be repeated */
95
96 if (!dpr->ToHyFlag) {
97 /* we are able to send a buffer */
98
99 if (hysdn_sched_tx(card, dpr->ToHyBuf, &dpr->ToHySize, &dpr->ToHyChannel,
100 ERG_TO_HY_BUF_SIZE)) {
101 dpr->ToHyFlag = 1; /* enable tx */
102 again = 1; /* restart loop */
103 }
104 } /* we are able to send a buffer */
105 if (dpr->ToPcFlag) {
106 /* a message has arrived for us, handle it */
107
108 if (hysdn_sched_rx(card, dpr->ToPcBuf, dpr->ToPcSize, dpr->ToPcChannel)) {
109 dpr->ToPcFlag = 0; /* we worked the data */
110 again = 1; /* restart loop */
111 }
112 } /* a message has arrived for us */
113 if (again) {
114 dpr->ToHyInt = 1;
115 dpr->ToPcInt = 1; /* interrupt to E1 for all cards */
116 } else
117 card->hw_lock = 0; /* free hardware again */
118 } while (again); /* until nothing more to do */
119
120 spin_unlock_irqrestore(&card->hysdn_lock, flags);
121 } /* ergo_irq_bh */
122
123
124 /*********************************************************/
125 /* stop the card (hardware reset) and disable interrupts */
126 /*********************************************************/
127 static void
128 ergo_stopcard(hysdn_card *card)
129 {
130 unsigned long flags;
131 unsigned char val;
132
133 hysdn_net_release(card); /* first release the net device if existing */
134 #ifdef CONFIG_HYSDN_CAPI
135 hycapi_capi_stop(card);
136 #endif /* CONFIG_HYSDN_CAPI */
137 spin_lock_irqsave(&card->hysdn_lock, flags);
138 val = bytein(card->iobase + PCI9050_INTR_REG); /* get actual value */
139 val &= ~(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1); /* mask irq */
140 byteout(card->iobase + PCI9050_INTR_REG, val);
141 card->irq_enabled = 0;
142 byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RESET); /* reset E1 processor */
143 card->state = CARD_STATE_UNUSED;
144 card->err_log_state = ERRLOG_STATE_OFF; /* currently no log active */
145
146 spin_unlock_irqrestore(&card->hysdn_lock, flags);
147 } /* ergo_stopcard */
148
149 /**************************************************************************/
150 /* enable or disable the cards error log. The event is queued if possible */
151 /**************************************************************************/
152 static void
153 ergo_set_errlog_state(hysdn_card *card, int on)
154 {
155 unsigned long flags;
156
157 if (card->state != CARD_STATE_RUN) {
158 card->err_log_state = ERRLOG_STATE_OFF; /* must be off */
159 return;
160 }
161 spin_lock_irqsave(&card->hysdn_lock, flags);
162
163 if (((card->err_log_state == ERRLOG_STATE_OFF) && !on) ||
164 ((card->err_log_state == ERRLOG_STATE_ON) && on)) {
165 spin_unlock_irqrestore(&card->hysdn_lock, flags);
166 return; /* nothing to do */
167 }
168 if (on)
169 card->err_log_state = ERRLOG_STATE_START; /* request start */
170 else
171 card->err_log_state = ERRLOG_STATE_STOP; /* request stop */
172
173 spin_unlock_irqrestore(&card->hysdn_lock, flags);
174 schedule_work(&card->irq_queue);
175 } /* ergo_set_errlog_state */
176
177 /******************************************/
178 /* test the cards RAM and return 0 if ok. */
179 /******************************************/
180 static const char TestText[36] = "This Message is filler, why read it";
181
182 static int
183 ergo_testram(hysdn_card *card)
184 {
185 tErgDpram *dpr = card->dpram;
186
187 memset(dpr->TrapTable, 0, sizeof(dpr->TrapTable)); /* clear all Traps */
188 dpr->ToHyInt = 1; /* E1 INTR state forced */
189
190 memcpy(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
191 sizeof(TestText));
192 if (memcmp(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
193 sizeof(TestText)))
194 return (-1);
195
196 memcpy(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
197 sizeof(TestText));
198 if (memcmp(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
199 sizeof(TestText)))
200 return (-1);
201
202 return (0);
203 } /* ergo_testram */
204
205 /*****************************************************************************/
206 /* this function is intended to write stage 1 boot image to the cards buffer */
207 /* this is done in two steps. First the 1024 hi-words are written (offs=0), */
208 /* then the 1024 lo-bytes are written. The remaining DPRAM is cleared, the */
209 /* PCI-write-buffers flushed and the card is taken out of reset. */
210 /* The function then waits for a reaction of the E1 processor or a timeout. */
211 /* Negative return values are interpreted as errors. */
212 /*****************************************************************************/
213 static int
214 ergo_writebootimg(struct HYSDN_CARD *card, unsigned char *buf,
215 unsigned long offs)
216 {
217 unsigned char *dst;
218 tErgDpram *dpram;
219 int cnt = (BOOT_IMG_SIZE >> 2); /* number of words to move and swap (byte order!) */
220
221 if (card->debug_flags & LOG_POF_CARD)
222 hysdn_addlog(card, "ERGO: write bootldr offs=0x%lx ", offs);
223
224 dst = card->dpram; /* pointer to start of DPRAM */
225 dst += (offs + ERG_DPRAM_FILL_SIZE); /* offset in the DPRAM */
226 while (cnt--) {
227 *dst++ = *(buf + 1); /* high byte */
228 *dst++ = *buf; /* low byte */
229 dst += 2; /* point to next longword */
230 buf += 2; /* buffer only filled with words */
231 }
232
233 /* if low words (offs = 2) have been written, clear the rest of the DPRAM, */
234 /* flush the PCI-write-buffer and take the E1 out of reset */
235 if (offs) {
236 memset(card->dpram, 0, ERG_DPRAM_FILL_SIZE); /* fill the DPRAM still not cleared */
237 dpram = card->dpram; /* get pointer to dpram structure */
238 dpram->ToHyNoDpramErrLog = 0xFF; /* write a dpram register */
239 while (!dpram->ToHyNoDpramErrLog); /* reread volatile register to flush PCI */
240
241 byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN); /* start E1 processor */
242 /* the interrupts are still masked */
243
244 msleep_interruptible(20); /* Timeout 20ms */
245
246 if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
247 if (card->debug_flags & LOG_POF_CARD)
248 hysdn_addlog(card, "ERGO: write bootldr no answer");
249 return (-ERR_BOOTIMG_FAIL);
250 }
251 } /* start_boot_img */
252 return (0); /* successful */
253 } /* ergo_writebootimg */
254
255 /********************************************************************************/
256 /* ergo_writebootseq writes the buffer containing len bytes to the E1 processor */
257 /* using the boot spool mechanism. If everything works fine 0 is returned. In */
258 /* case of errors a negative error value is returned. */
259 /********************************************************************************/
260 static int
261 ergo_writebootseq(struct HYSDN_CARD *card, unsigned char *buf, int len)
262 {
263 tDpramBootSpooler *sp = (tDpramBootSpooler *) card->dpram;
264 unsigned char *dst;
265 unsigned char buflen;
266 int nr_write;
267 unsigned char tmp_rdptr;
268 unsigned char wr_mirror;
269 int i;
270
271 if (card->debug_flags & LOG_POF_CARD)
272 hysdn_addlog(card, "ERGO: write boot seq len=%d ", len);
273
274 dst = sp->Data; /* point to data in spool structure */
275 buflen = sp->Len; /* maximum len of spooled data */
276 wr_mirror = sp->WrPtr; /* only once read */
277
278 /* try until all bytes written or error */
279 i = 0x1000; /* timeout value */
280 while (len) {
281
282 /* first determine the number of bytes that may be buffered */
283 do {
284 tmp_rdptr = sp->RdPtr; /* first read the pointer */
285 i--; /* decrement timeout */
286 } while (i && (tmp_rdptr != sp->RdPtr)); /* wait for stable pointer */
287
288 if (!i) {
289 if (card->debug_flags & LOG_POF_CARD)
290 hysdn_addlog(card, "ERGO: write boot seq timeout");
291 return (-ERR_BOOTSEQ_FAIL); /* value not stable -> timeout */
292 }
293 if ((nr_write = tmp_rdptr - wr_mirror - 1) < 0)
294 nr_write += buflen; /* now we got number of free bytes - 1 in buffer */
295
296 if (!nr_write)
297 continue; /* no free bytes in buffer */
298
299 if (nr_write > len)
300 nr_write = len; /* limit if last few bytes */
301 i = 0x1000; /* reset timeout value */
302
303 /* now we know how much bytes we may put in the puffer */
304 len -= nr_write; /* we savely could adjust len before output */
305 while (nr_write--) {
306 *(dst + wr_mirror) = *buf++; /* output one byte */
307 if (++wr_mirror >= buflen)
308 wr_mirror = 0;
309 sp->WrPtr = wr_mirror; /* announce the next byte to E1 */
310 } /* while (nr_write) */
311
312 } /* while (len) */
313 return (0);
314 } /* ergo_writebootseq */
315
316 /***********************************************************************************/
317 /* ergo_waitpofready waits for a maximum of 10 seconds for the completition of the */
318 /* boot process. If the process has been successful 0 is returned otherwise a */
319 /* negative error code is returned. */
320 /***********************************************************************************/
321 static int
322 ergo_waitpofready(struct HYSDN_CARD *card)
323 {
324 tErgDpram *dpr = card->dpram; /* pointer to DPRAM structure */
325 int timecnt = 10000 / 50; /* timeout is 10 secs max. */
326 unsigned long flags;
327 int msg_size;
328 int i;
329
330 if (card->debug_flags & LOG_POF_CARD)
331 hysdn_addlog(card, "ERGO: waiting for pof ready");
332 while (timecnt--) {
333 /* wait until timeout */
334
335 if (dpr->ToPcFlag) {
336 /* data has arrived */
337
338 if ((dpr->ToPcChannel != CHAN_SYSTEM) ||
339 (dpr->ToPcSize < MIN_RDY_MSG_SIZE) ||
340 (dpr->ToPcSize > MAX_RDY_MSG_SIZE) ||
341 ((*(unsigned long *) dpr->ToPcBuf) != RDY_MAGIC))
342 break; /* an error occurred */
343
344 /* Check for additional data delivered during SysReady */
345 msg_size = dpr->ToPcSize - RDY_MAGIC_SIZE;
346 if (msg_size > 0)
347 if (EvalSysrTokData(card, dpr->ToPcBuf + RDY_MAGIC_SIZE, msg_size))
348 break;
349
350 if (card->debug_flags & LOG_POF_RECORD)
351 hysdn_addlog(card, "ERGO: pof boot success");
352 spin_lock_irqsave(&card->hysdn_lock, flags);
353
354 card->state = CARD_STATE_RUN; /* now card is running */
355 /* enable the cards interrupt */
356 byteout(card->iobase + PCI9050_INTR_REG,
357 bytein(card->iobase + PCI9050_INTR_REG) |
358 (PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1));
359 card->irq_enabled = 1; /* we are ready to receive interrupts */
360
361 dpr->ToPcFlag = 0; /* reset data indicator */
362 dpr->ToHyInt = 1;
363 dpr->ToPcInt = 1; /* interrupt to E1 for all cards */
364
365 spin_unlock_irqrestore(&card->hysdn_lock, flags);
366 if ((hynet_enable & (1 << card->myid))
367 && (i = hysdn_net_create(card)))
368 {
369 ergo_stopcard(card);
370 card->state = CARD_STATE_BOOTERR;
371 return (i);
372 }
373 #ifdef CONFIG_HYSDN_CAPI
374 if ((i = hycapi_capi_create(card))) {
375 printk(KERN_WARNING "HYSDN: failed to create capi-interface.\n");
376 }
377 #endif /* CONFIG_HYSDN_CAPI */
378 return (0); /* success */
379 } /* data has arrived */
380 msleep_interruptible(50); /* Timeout 50ms */
381 } /* wait until timeout */
382
383 if (card->debug_flags & LOG_POF_CARD)
384 hysdn_addlog(card, "ERGO: pof boot ready timeout");
385 return (-ERR_POF_TIMEOUT);
386 } /* ergo_waitpofready */
387
388
389
390 /************************************************************************************/
391 /* release the cards hardware. Before releasing do a interrupt disable and hardware */
392 /* reset. Also unmap dpram. */
393 /* Use only during module release. */
394 /************************************************************************************/
395 static void
396 ergo_releasehardware(hysdn_card *card)
397 {
398 ergo_stopcard(card); /* first stop the card if not already done */
399 free_irq(card->irq, card); /* release interrupt */
400 release_region(card->iobase + PCI9050_INTR_REG, 1); /* release all io ports */
401 release_region(card->iobase + PCI9050_USER_IO, 1);
402 iounmap(card->dpram);
403 card->dpram = NULL; /* release shared mem */
404 } /* ergo_releasehardware */
405
406
407 /*********************************************************************************/
408 /* acquire the needed hardware ports and map dpram. If an error occurs a nonzero */
409 /* value is returned. */
410 /* Use only during module init. */
411 /*********************************************************************************/
412 int
413 ergo_inithardware(hysdn_card *card)
414 {
415 if (!request_region(card->iobase + PCI9050_INTR_REG, 1, "HYSDN"))
416 return (-1);
417 if (!request_region(card->iobase + PCI9050_USER_IO, 1, "HYSDN")) {
418 release_region(card->iobase + PCI9050_INTR_REG, 1);
419 return (-1); /* ports already in use */
420 }
421 card->memend = card->membase + ERG_DPRAM_PAGE_SIZE - 1;
422 if (!(card->dpram = ioremap(card->membase, ERG_DPRAM_PAGE_SIZE))) {
423 release_region(card->iobase + PCI9050_INTR_REG, 1);
424 release_region(card->iobase + PCI9050_USER_IO, 1);
425 return (-1);
426 }
427
428 ergo_stopcard(card); /* disable interrupts */
429 if (request_irq(card->irq, ergo_interrupt, IRQF_SHARED, "HYSDN", card)) {
430 ergo_releasehardware(card); /* return the acquired hardware */
431 return (-1);
432 }
433 /* success, now setup the function pointers */
434 card->stopcard = ergo_stopcard;
435 card->releasehardware = ergo_releasehardware;
436 card->testram = ergo_testram;
437 card->writebootimg = ergo_writebootimg;
438 card->writebootseq = ergo_writebootseq;
439 card->waitpofready = ergo_waitpofready;
440 card->set_errlog_state = ergo_set_errlog_state;
441 INIT_WORK(&card->irq_queue, ergo_irq_bh);
442 spin_lock_init(&card->hysdn_lock);
443
444 return (0);
445 } /* ergo_inithardware */
Linux with added FPC-III support