Linux 4.16.11
[linux/fpc-iii.git] / drivers / leds / leds-netxbig.c
blobf48b1aed9b4e3b410cf33a6c1e9f31d41058cf38
1 /*
2 * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs
4 * Copyright (C) 2010 LaCie
6 * Author: Simon Guinot <sguinot@lacie.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 #include <linux/module.h>
24 #include <linux/irq.h>
25 #include <linux/slab.h>
26 #include <linux/spinlock.h>
27 #include <linux/platform_device.h>
28 #include <linux/gpio.h>
29 #include <linux/of_gpio.h>
30 #include <linux/leds.h>
31 #include <linux/platform_data/leds-kirkwood-netxbig.h>
34 * GPIO extension bus.
37 static DEFINE_SPINLOCK(gpio_ext_lock);
39 static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr)
41 int pin;
43 for (pin = 0; pin < gpio_ext->num_addr; pin++)
44 gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1);
47 static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data)
49 int pin;
51 for (pin = 0; pin < gpio_ext->num_data; pin++)
52 gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1);
55 static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext)
57 /* Enable select is done on the raising edge. */
58 gpio_set_value(gpio_ext->enable, 0);
59 gpio_set_value(gpio_ext->enable, 1);
62 static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext,
63 int addr, int value)
65 unsigned long flags;
67 spin_lock_irqsave(&gpio_ext_lock, flags);
68 gpio_ext_set_addr(gpio_ext, addr);
69 gpio_ext_set_data(gpio_ext, value);
70 gpio_ext_enable_select(gpio_ext);
71 spin_unlock_irqrestore(&gpio_ext_lock, flags);
74 static int gpio_ext_init(struct platform_device *pdev,
75 struct netxbig_gpio_ext *gpio_ext)
77 int err;
78 int i;
80 if (unlikely(!gpio_ext))
81 return -EINVAL;
83 /* Configure address GPIOs. */
84 for (i = 0; i < gpio_ext->num_addr; i++) {
85 err = devm_gpio_request_one(&pdev->dev, gpio_ext->addr[i],
86 GPIOF_OUT_INIT_LOW,
87 "GPIO extension addr");
88 if (err)
89 return err;
91 /* Configure data GPIOs. */
92 for (i = 0; i < gpio_ext->num_data; i++) {
93 err = devm_gpio_request_one(&pdev->dev, gpio_ext->data[i],
94 GPIOF_OUT_INIT_LOW,
95 "GPIO extension data");
96 if (err)
97 return err;
99 /* Configure "enable select" GPIO. */
100 err = devm_gpio_request_one(&pdev->dev, gpio_ext->enable,
101 GPIOF_OUT_INIT_LOW,
102 "GPIO extension enable");
103 if (err)
104 return err;
106 return 0;
110 * Class LED driver.
113 struct netxbig_led_data {
114 struct netxbig_gpio_ext *gpio_ext;
115 struct led_classdev cdev;
116 int mode_addr;
117 int *mode_val;
118 int bright_addr;
119 struct netxbig_led_timer *timer;
120 int num_timer;
121 enum netxbig_led_mode mode;
122 int sata;
123 spinlock_t lock;
126 static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode,
127 unsigned long delay_on,
128 unsigned long delay_off,
129 struct netxbig_led_timer *timer,
130 int num_timer)
132 int i;
134 for (i = 0; i < num_timer; i++) {
135 if (timer[i].delay_on == delay_on &&
136 timer[i].delay_off == delay_off) {
137 *mode = timer[i].mode;
138 return 0;
141 return -EINVAL;
144 static int netxbig_led_blink_set(struct led_classdev *led_cdev,
145 unsigned long *delay_on,
146 unsigned long *delay_off)
148 struct netxbig_led_data *led_dat =
149 container_of(led_cdev, struct netxbig_led_data, cdev);
150 enum netxbig_led_mode mode;
151 int mode_val;
152 int ret;
154 /* Look for a LED mode with the requested timer frequency. */
155 ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off,
156 led_dat->timer, led_dat->num_timer);
157 if (ret < 0)
158 return ret;
160 mode_val = led_dat->mode_val[mode];
161 if (mode_val == NETXBIG_LED_INVALID_MODE)
162 return -EINVAL;
164 spin_lock_irq(&led_dat->lock);
166 gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
167 led_dat->mode = mode;
169 spin_unlock_irq(&led_dat->lock);
171 return 0;
174 static void netxbig_led_set(struct led_classdev *led_cdev,
175 enum led_brightness value)
177 struct netxbig_led_data *led_dat =
178 container_of(led_cdev, struct netxbig_led_data, cdev);
179 enum netxbig_led_mode mode;
180 int mode_val;
181 int set_brightness = 1;
182 unsigned long flags;
184 spin_lock_irqsave(&led_dat->lock, flags);
186 if (value == LED_OFF) {
187 mode = NETXBIG_LED_OFF;
188 set_brightness = 0;
189 } else {
190 if (led_dat->sata)
191 mode = NETXBIG_LED_SATA;
192 else if (led_dat->mode == NETXBIG_LED_OFF)
193 mode = NETXBIG_LED_ON;
194 else /* Keep 'timer' mode. */
195 mode = led_dat->mode;
197 mode_val = led_dat->mode_val[mode];
199 gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
200 led_dat->mode = mode;
202 * Note that the brightness register is shared between all the
203 * SATA LEDs. So, change the brightness setting for a single
204 * SATA LED will affect all the others.
206 if (set_brightness)
207 gpio_ext_set_value(led_dat->gpio_ext,
208 led_dat->bright_addr, value);
210 spin_unlock_irqrestore(&led_dat->lock, flags);
213 static ssize_t netxbig_led_sata_store(struct device *dev,
214 struct device_attribute *attr,
215 const char *buff, size_t count)
217 struct led_classdev *led_cdev = dev_get_drvdata(dev);
218 struct netxbig_led_data *led_dat =
219 container_of(led_cdev, struct netxbig_led_data, cdev);
220 unsigned long enable;
221 enum netxbig_led_mode mode;
222 int mode_val;
223 int ret;
225 ret = kstrtoul(buff, 10, &enable);
226 if (ret < 0)
227 return ret;
229 enable = !!enable;
231 spin_lock_irq(&led_dat->lock);
233 if (led_dat->sata == enable) {
234 ret = count;
235 goto exit_unlock;
238 if (led_dat->mode != NETXBIG_LED_ON &&
239 led_dat->mode != NETXBIG_LED_SATA)
240 mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */
241 else if (enable)
242 mode = NETXBIG_LED_SATA;
243 else
244 mode = NETXBIG_LED_ON;
246 mode_val = led_dat->mode_val[mode];
247 if (mode_val == NETXBIG_LED_INVALID_MODE) {
248 ret = -EINVAL;
249 goto exit_unlock;
252 gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val);
253 led_dat->mode = mode;
254 led_dat->sata = enable;
256 ret = count;
258 exit_unlock:
259 spin_unlock_irq(&led_dat->lock);
261 return ret;
264 static ssize_t netxbig_led_sata_show(struct device *dev,
265 struct device_attribute *attr, char *buf)
267 struct led_classdev *led_cdev = dev_get_drvdata(dev);
268 struct netxbig_led_data *led_dat =
269 container_of(led_cdev, struct netxbig_led_data, cdev);
271 return sprintf(buf, "%d\n", led_dat->sata);
274 static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store);
276 static struct attribute *netxbig_led_attrs[] = {
277 &dev_attr_sata.attr,
278 NULL
280 ATTRIBUTE_GROUPS(netxbig_led);
282 static int create_netxbig_led(struct platform_device *pdev,
283 struct netxbig_led_platform_data *pdata,
284 struct netxbig_led_data *led_dat,
285 const struct netxbig_led *template)
287 spin_lock_init(&led_dat->lock);
288 led_dat->gpio_ext = pdata->gpio_ext;
289 led_dat->cdev.name = template->name;
290 led_dat->cdev.default_trigger = template->default_trigger;
291 led_dat->cdev.blink_set = netxbig_led_blink_set;
292 led_dat->cdev.brightness_set = netxbig_led_set;
294 * Because the GPIO extension bus don't allow to read registers
295 * value, there is no way to probe the LED initial state.
296 * So, the initial sysfs LED value for the "brightness" and "sata"
297 * attributes are inconsistent.
299 * Note that the initial LED state can't be reconfigured.
300 * The reason is that the LED behaviour must stay uniform during
301 * the whole boot process (bootloader+linux).
303 led_dat->sata = 0;
304 led_dat->cdev.brightness = LED_OFF;
305 led_dat->cdev.max_brightness = template->bright_max;
306 led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
307 led_dat->mode_addr = template->mode_addr;
308 led_dat->mode_val = template->mode_val;
309 led_dat->bright_addr = template->bright_addr;
310 led_dat->timer = pdata->timer;
311 led_dat->num_timer = pdata->num_timer;
313 * If available, expose the SATA activity blink capability through
314 * a "sata" sysfs attribute.
316 if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE)
317 led_dat->cdev.groups = netxbig_led_groups;
319 return devm_led_classdev_register(&pdev->dev, &led_dat->cdev);
322 #ifdef CONFIG_OF_GPIO
323 static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
324 struct netxbig_gpio_ext *gpio_ext)
326 int *addr, *data;
327 int num_addr, num_data;
328 int ret;
329 int i;
331 ret = of_gpio_named_count(np, "addr-gpios");
332 if (ret < 0) {
333 dev_err(dev,
334 "Failed to count GPIOs in DT property addr-gpios\n");
335 return ret;
337 num_addr = ret;
338 addr = devm_kzalloc(dev, num_addr * sizeof(*addr), GFP_KERNEL);
339 if (!addr)
340 return -ENOMEM;
342 for (i = 0; i < num_addr; i++) {
343 ret = of_get_named_gpio(np, "addr-gpios", i);
344 if (ret < 0)
345 return ret;
346 addr[i] = ret;
348 gpio_ext->addr = addr;
349 gpio_ext->num_addr = num_addr;
351 ret = of_gpio_named_count(np, "data-gpios");
352 if (ret < 0) {
353 dev_err(dev,
354 "Failed to count GPIOs in DT property data-gpios\n");
355 return ret;
357 num_data = ret;
358 data = devm_kzalloc(dev, num_data * sizeof(*data), GFP_KERNEL);
359 if (!data)
360 return -ENOMEM;
362 for (i = 0; i < num_data; i++) {
363 ret = of_get_named_gpio(np, "data-gpios", i);
364 if (ret < 0)
365 return ret;
366 data[i] = ret;
368 gpio_ext->data = data;
369 gpio_ext->num_data = num_data;
371 ret = of_get_named_gpio(np, "enable-gpio", 0);
372 if (ret < 0) {
373 dev_err(dev,
374 "Failed to get GPIO from DT property enable-gpio\n");
375 return ret;
377 gpio_ext->enable = ret;
379 return 0;
382 static int netxbig_leds_get_of_pdata(struct device *dev,
383 struct netxbig_led_platform_data *pdata)
385 struct device_node *np = dev->of_node;
386 struct device_node *gpio_ext_np;
387 struct device_node *child;
388 struct netxbig_gpio_ext *gpio_ext;
389 struct netxbig_led_timer *timers;
390 struct netxbig_led *leds, *led;
391 int num_timers;
392 int num_leds = 0;
393 int ret;
394 int i;
396 /* GPIO extension */
397 gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0);
398 if (!gpio_ext_np) {
399 dev_err(dev, "Failed to get DT handle gpio-ext\n");
400 return -EINVAL;
403 gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL);
404 if (!gpio_ext)
405 return -ENOMEM;
406 ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext);
407 if (ret)
408 return ret;
409 of_node_put(gpio_ext_np);
410 pdata->gpio_ext = gpio_ext;
412 /* Timers (optional) */
413 ret = of_property_count_u32_elems(np, "timers");
414 if (ret > 0) {
415 if (ret % 3)
416 return -EINVAL;
417 num_timers = ret / 3;
418 timers = devm_kzalloc(dev, num_timers * sizeof(*timers),
419 GFP_KERNEL);
420 if (!timers)
421 return -ENOMEM;
422 for (i = 0; i < num_timers; i++) {
423 u32 tmp;
425 of_property_read_u32_index(np, "timers", 3 * i,
426 &timers[i].mode);
427 if (timers[i].mode >= NETXBIG_LED_MODE_NUM)
428 return -EINVAL;
429 of_property_read_u32_index(np, "timers",
430 3 * i + 1, &tmp);
431 timers[i].delay_on = tmp;
432 of_property_read_u32_index(np, "timers",
433 3 * i + 2, &tmp);
434 timers[i].delay_off = tmp;
436 pdata->timer = timers;
437 pdata->num_timer = num_timers;
440 /* LEDs */
441 num_leds = of_get_child_count(np);
442 if (!num_leds) {
443 dev_err(dev, "No LED subnodes found in DT\n");
444 return -ENODEV;
447 leds = devm_kzalloc(dev, num_leds * sizeof(*leds), GFP_KERNEL);
448 if (!leds)
449 return -ENOMEM;
451 led = leds;
452 for_each_child_of_node(np, child) {
453 const char *string;
454 int *mode_val;
455 int num_modes;
457 ret = of_property_read_u32(child, "mode-addr",
458 &led->mode_addr);
459 if (ret)
460 goto err_node_put;
462 ret = of_property_read_u32(child, "bright-addr",
463 &led->bright_addr);
464 if (ret)
465 goto err_node_put;
467 ret = of_property_read_u32(child, "max-brightness",
468 &led->bright_max);
469 if (ret)
470 goto err_node_put;
472 mode_val =
473 devm_kzalloc(dev,
474 NETXBIG_LED_MODE_NUM * sizeof(*mode_val),
475 GFP_KERNEL);
476 if (!mode_val) {
477 ret = -ENOMEM;
478 goto err_node_put;
481 for (i = 0; i < NETXBIG_LED_MODE_NUM; i++)
482 mode_val[i] = NETXBIG_LED_INVALID_MODE;
484 ret = of_property_count_u32_elems(child, "mode-val");
485 if (ret < 0 || ret % 2) {
486 ret = -EINVAL;
487 goto err_node_put;
489 num_modes = ret / 2;
490 if (num_modes > NETXBIG_LED_MODE_NUM) {
491 ret = -EINVAL;
492 goto err_node_put;
495 for (i = 0; i < num_modes; i++) {
496 int mode;
497 int val;
499 of_property_read_u32_index(child,
500 "mode-val", 2 * i, &mode);
501 of_property_read_u32_index(child,
502 "mode-val", 2 * i + 1, &val);
503 if (mode >= NETXBIG_LED_MODE_NUM) {
504 ret = -EINVAL;
505 goto err_node_put;
507 mode_val[mode] = val;
509 led->mode_val = mode_val;
511 if (!of_property_read_string(child, "label", &string))
512 led->name = string;
513 else
514 led->name = child->name;
516 if (!of_property_read_string(child,
517 "linux,default-trigger", &string))
518 led->default_trigger = string;
520 led++;
523 pdata->leds = leds;
524 pdata->num_leds = num_leds;
526 return 0;
528 err_node_put:
529 of_node_put(child);
530 return ret;
533 static const struct of_device_id of_netxbig_leds_match[] = {
534 { .compatible = "lacie,netxbig-leds", },
537 MODULE_DEVICE_TABLE(of, of_netxbig_leds_match);
538 #else
539 static inline int
540 netxbig_leds_get_of_pdata(struct device *dev,
541 struct netxbig_led_platform_data *pdata)
543 return -ENODEV;
545 #endif /* CONFIG_OF_GPIO */
547 static int netxbig_led_probe(struct platform_device *pdev)
549 struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
550 struct netxbig_led_data *leds_data;
551 int i;
552 int ret;
554 if (!pdata) {
555 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
556 if (!pdata)
557 return -ENOMEM;
558 ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata);
559 if (ret)
560 return ret;
563 leds_data = devm_kzalloc(&pdev->dev,
564 pdata->num_leds * sizeof(*leds_data),
565 GFP_KERNEL);
566 if (!leds_data)
567 return -ENOMEM;
569 ret = gpio_ext_init(pdev, pdata->gpio_ext);
570 if (ret < 0)
571 return ret;
573 for (i = 0; i < pdata->num_leds; i++) {
574 ret = create_netxbig_led(pdev, pdata,
575 &leds_data[i], &pdata->leds[i]);
576 if (ret < 0)
577 return ret;
580 return 0;
583 static struct platform_driver netxbig_led_driver = {
584 .probe = netxbig_led_probe,
585 .driver = {
586 .name = "leds-netxbig",
587 .of_match_table = of_match_ptr(of_netxbig_leds_match),
591 module_platform_driver(netxbig_led_driver);
593 MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
594 MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards");
595 MODULE_LICENSE("GPL");
596 MODULE_ALIAS("platform:leds-netxbig");