Linux 4.16.11
[linux/fpc-iii.git] / drivers / media / i2c / ov9650.c
blobe519f278d5f973452c66af07c25e977d3bbfb435
1 /*
2 * Omnivision OV9650/OV9652 CMOS Image Sensor driver
4 * Copyright (C) 2013, Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
6 * Register definitions and initial settings based on a driver written
7 * by Vladimir Fonov.
8 * Copyright (c) 2010, Vladimir Fonov
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/gpio.h>
16 #include <linux/i2c.h>
17 #include <linux/kernel.h>
18 #include <linux/media.h>
19 #include <linux/module.h>
20 #include <linux/ratelimit.h>
21 #include <linux/slab.h>
22 #include <linux/string.h>
23 #include <linux/videodev2.h>
25 #include <media/media-entity.h>
26 #include <media/v4l2-async.h>
27 #include <media/v4l2-ctrls.h>
28 #include <media/v4l2-device.h>
29 #include <media/v4l2-event.h>
30 #include <media/v4l2-image-sizes.h>
31 #include <media/v4l2-subdev.h>
32 #include <media/v4l2-mediabus.h>
33 #include <media/i2c/ov9650.h>
35 static int debug;
36 module_param(debug, int, 0644);
37 MODULE_PARM_DESC(debug, "Debug level (0-2)");
39 #define DRIVER_NAME "OV9650"
42 * OV9650/OV9652 register definitions
44 #define REG_GAIN 0x00 /* Gain control, AGC[7:0] */
45 #define REG_BLUE 0x01 /* AWB - Blue chanel gain */
46 #define REG_RED 0x02 /* AWB - Red chanel gain */
47 #define REG_VREF 0x03 /* [7:6] - AGC[9:8], [5:3]/[2:0] */
48 #define VREF_GAIN_MASK 0xc0 /* - VREF end/start low 3 bits */
49 #define REG_COM1 0x04
50 #define COM1_CCIR656 0x40
51 #define REG_B_AVE 0x05
52 #define REG_GB_AVE 0x06
53 #define REG_GR_AVE 0x07
54 #define REG_R_AVE 0x08
55 #define REG_COM2 0x09
56 #define REG_PID 0x0a /* Product ID MSB */
57 #define REG_VER 0x0b /* Product ID LSB */
58 #define REG_COM3 0x0c
59 #define COM3_SWAP 0x40
60 #define COM3_VARIOPIXEL1 0x04
61 #define REG_COM4 0x0d /* Vario Pixels */
62 #define COM4_VARIOPIXEL2 0x80
63 #define REG_COM5 0x0e /* System clock options */
64 #define COM5_SLAVE_MODE 0x10
65 #define COM5_SYSTEMCLOCK48MHZ 0x80
66 #define REG_COM6 0x0f /* HREF & ADBLC options */
67 #define REG_AECH 0x10 /* Exposure value, AEC[9:2] */
68 #define REG_CLKRC 0x11 /* Clock control */
69 #define CLK_EXT 0x40 /* Use external clock directly */
70 #define CLK_SCALE 0x3f /* Mask for internal clock scale */
71 #define REG_COM7 0x12 /* SCCB reset, output format */
72 #define COM7_RESET 0x80
73 #define COM7_FMT_MASK 0x38
74 #define COM7_FMT_VGA 0x40
75 #define COM7_FMT_CIF 0x20
76 #define COM7_FMT_QVGA 0x10
77 #define COM7_FMT_QCIF 0x08
78 #define COM7_RGB 0x04
79 #define COM7_YUV 0x00
80 #define COM7_BAYER 0x01
81 #define COM7_PBAYER 0x05
82 #define REG_COM8 0x13 /* AGC/AEC options */
83 #define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */
84 #define COM8_AECSTEP 0x40 /* Unlimited AEC step size */
85 #define COM8_BFILT 0x20 /* Band filter enable */
86 #define COM8_AGC 0x04 /* Auto gain enable */
87 #define COM8_AWB 0x02 /* White balance enable */
88 #define COM8_AEC 0x01 /* Auto exposure enable */
89 #define REG_COM9 0x14 /* Gain ceiling */
90 #define COM9_GAIN_CEIL_MASK 0x70 /* */
91 #define REG_COM10 0x15 /* PCLK, HREF, HSYNC signals polarity */
92 #define COM10_HSYNC 0x40 /* HSYNC instead of HREF */
93 #define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */
94 #define COM10_HREF_REV 0x08 /* Reverse HREF */
95 #define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */
96 #define COM10_VS_NEG 0x02 /* VSYNC negative */
97 #define COM10_HS_NEG 0x01 /* HSYNC negative */
98 #define REG_HSTART 0x17 /* Horiz start high bits */
99 #define REG_HSTOP 0x18 /* Horiz stop high bits */
100 #define REG_VSTART 0x19 /* Vert start high bits */
101 #define REG_VSTOP 0x1a /* Vert stop high bits */
102 #define REG_PSHFT 0x1b /* Pixel delay after HREF */
103 #define REG_MIDH 0x1c /* Manufacturer ID MSB */
104 #define REG_MIDL 0x1d /* Manufufacturer ID LSB */
105 #define REG_MVFP 0x1e /* Image mirror/flip */
106 #define MVFP_MIRROR 0x20 /* Mirror image */
107 #define MVFP_FLIP 0x10 /* Vertical flip */
108 #define REG_BOS 0x20 /* B channel Offset */
109 #define REG_GBOS 0x21 /* Gb channel Offset */
110 #define REG_GROS 0x22 /* Gr channel Offset */
111 #define REG_ROS 0x23 /* R channel Offset */
112 #define REG_AEW 0x24 /* AGC upper limit */
113 #define REG_AEB 0x25 /* AGC lower limit */
114 #define REG_VPT 0x26 /* AGC/AEC fast mode op region */
115 #define REG_BBIAS 0x27 /* B channel output bias */
116 #define REG_GBBIAS 0x28 /* Gb channel output bias */
117 #define REG_GRCOM 0x29 /* Analog BLC & regulator */
118 #define REG_EXHCH 0x2a /* Dummy pixel insert MSB */
119 #define REG_EXHCL 0x2b /* Dummy pixel insert LSB */
120 #define REG_RBIAS 0x2c /* R channel output bias */
121 #define REG_ADVFL 0x2d /* LSB of dummy line insert */
122 #define REG_ADVFH 0x2e /* MSB of dummy line insert */
123 #define REG_YAVE 0x2f /* Y/G channel average value */
124 #define REG_HSYST 0x30 /* HSYNC rising edge delay LSB*/
125 #define REG_HSYEN 0x31 /* HSYNC falling edge delay LSB*/
126 #define REG_HREF 0x32 /* HREF pieces */
127 #define REG_CHLF 0x33 /* reserved */
128 #define REG_ADC 0x37 /* reserved */
129 #define REG_ACOM 0x38 /* reserved */
130 #define REG_OFON 0x39 /* Power down register */
131 #define OFON_PWRDN 0x08 /* Power down bit */
132 #define REG_TSLB 0x3a /* YUVU format */
133 #define TSLB_YUYV_MASK 0x0c /* UYVY or VYUY - see com13 */
134 #define REG_COM11 0x3b /* Night mode, banding filter enable */
135 #define COM11_NIGHT 0x80 /* Night mode enable */
136 #define COM11_NMFR 0x60 /* Two bit NM frame rate */
137 #define COM11_BANDING 0x01 /* Banding filter */
138 #define COM11_AEC_REF_MASK 0x18 /* AEC reference area selection */
139 #define REG_COM12 0x3c /* HREF option, UV average */
140 #define COM12_HREF 0x80 /* HREF always */
141 #define REG_COM13 0x3d /* Gamma selection, Color matrix en. */
142 #define COM13_GAMMA 0x80 /* Gamma enable */
143 #define COM13_UVSAT 0x40 /* UV saturation auto adjustment */
144 #define COM13_UVSWAP 0x01 /* V before U - w/TSLB */
145 #define REG_COM14 0x3e /* Edge enhancement options */
146 #define COM14_EDGE_EN 0x02
147 #define COM14_EEF_X2 0x01
148 #define REG_EDGE 0x3f /* Edge enhancement factor */
149 #define EDGE_FACTOR_MASK 0x0f
150 #define REG_COM15 0x40 /* Output range, RGB 555/565 */
151 #define COM15_R10F0 0x00 /* Data range 10 to F0 */
152 #define COM15_R01FE 0x80 /* 01 to FE */
153 #define COM15_R00FF 0xc0 /* 00 to FF */
154 #define COM15_RGB565 0x10 /* RGB565 output */
155 #define COM15_RGB555 0x30 /* RGB555 output */
156 #define COM15_SWAPRB 0x04 /* Swap R&B */
157 #define REG_COM16 0x41 /* Color matrix coeff options */
158 #define REG_COM17 0x42 /* Single frame out, banding filter */
159 /* n = 1...9, 0x4f..0x57 */
160 #define REG_MTX(__n) (0x4f + (__n) - 1)
161 #define REG_MTXS 0x58
162 /* Lens Correction Option 1...5, __n = 0...5 */
163 #define REG_LCC(__n) (0x62 + (__n) - 1)
164 #define LCC5_LCC_ENABLE 0x01 /* LCC5, enable lens correction */
165 #define LCC5_LCC_COLOR 0x04
166 #define REG_MANU 0x67 /* Manual U value */
167 #define REG_MANV 0x68 /* Manual V value */
168 #define REG_HV 0x69 /* Manual banding filter MSB */
169 #define REG_MBD 0x6a /* Manual banding filter value */
170 #define REG_DBLV 0x6b /* reserved */
171 #define REG_GSP 0x6c /* Gamma curve */
172 #define GSP_LEN 15
173 #define REG_GST 0x7c /* Gamma curve */
174 #define GST_LEN 15
175 #define REG_COM21 0x8b
176 #define REG_COM22 0x8c /* Edge enhancement, denoising */
177 #define COM22_WHTPCOR 0x02 /* White pixel correction enable */
178 #define COM22_WHTPCOROPT 0x01 /* White pixel correction option */
179 #define COM22_DENOISE 0x10 /* White pixel correction option */
180 #define REG_COM23 0x8d /* Color bar test, color gain */
181 #define COM23_TEST_MODE 0x10
182 #define REG_DBLC1 0x8f /* Digital BLC */
183 #define REG_DBLC_B 0x90 /* Digital BLC B channel offset */
184 #define REG_DBLC_R 0x91 /* Digital BLC R channel offset */
185 #define REG_DM_LNL 0x92 /* Dummy line low 8 bits */
186 #define REG_DM_LNH 0x93 /* Dummy line high 8 bits */
187 #define REG_LCCFB 0x9d /* Lens Correction B channel */
188 #define REG_LCCFR 0x9e /* Lens Correction R channel */
189 #define REG_DBLC_GB 0x9f /* Digital BLC GB chan offset */
190 #define REG_DBLC_GR 0xa0 /* Digital BLC GR chan offset */
191 #define REG_AECHM 0xa1 /* Exposure value - bits AEC[15:10] */
192 #define REG_BD50ST 0xa2 /* Banding filter value for 50Hz */
193 #define REG_BD60ST 0xa3 /* Banding filter value for 60Hz */
194 #define REG_NULL 0xff /* Array end token */
196 #define DEF_CLKRC 0x80
198 #define OV965X_ID(_msb, _lsb) ((_msb) << 8 | (_lsb))
199 #define OV9650_ID 0x9650
200 #define OV9652_ID 0x9652
202 struct ov965x_ctrls {
203 struct v4l2_ctrl_handler handler;
204 struct {
205 struct v4l2_ctrl *auto_exp;
206 struct v4l2_ctrl *exposure;
208 struct {
209 struct v4l2_ctrl *auto_wb;
210 struct v4l2_ctrl *blue_balance;
211 struct v4l2_ctrl *red_balance;
213 struct {
214 struct v4l2_ctrl *hflip;
215 struct v4l2_ctrl *vflip;
217 struct {
218 struct v4l2_ctrl *auto_gain;
219 struct v4l2_ctrl *gain;
221 struct v4l2_ctrl *brightness;
222 struct v4l2_ctrl *saturation;
223 struct v4l2_ctrl *sharpness;
224 struct v4l2_ctrl *light_freq;
225 u8 update;
228 struct ov965x_framesize {
229 u16 width;
230 u16 height;
231 u16 max_exp_lines;
232 const u8 *regs;
235 struct ov965x_interval {
236 struct v4l2_fract interval;
237 /* Maximum resolution for this interval */
238 struct v4l2_frmsize_discrete size;
239 u8 clkrc_div;
242 enum gpio_id {
243 GPIO_PWDN,
244 GPIO_RST,
245 NUM_GPIOS,
248 struct ov965x {
249 struct v4l2_subdev sd;
250 struct media_pad pad;
251 enum v4l2_mbus_type bus_type;
252 int gpios[NUM_GPIOS];
253 /* External master clock frequency */
254 unsigned long mclk_frequency;
256 /* Protects the struct fields below */
257 struct mutex lock;
259 struct i2c_client *client;
261 /* Exposure row interval in us */
262 unsigned int exp_row_interval;
264 unsigned short id;
265 const struct ov965x_framesize *frame_size;
266 /* YUYV sequence (pixel format) control register */
267 u8 tslb_reg;
268 struct v4l2_mbus_framefmt format;
270 struct ov965x_ctrls ctrls;
271 /* Pointer to frame rate control data structure */
272 const struct ov965x_interval *fiv;
274 int streaming;
275 int power;
277 u8 apply_frame_fmt;
280 struct i2c_rv {
281 u8 addr;
282 u8 value;
285 static const struct i2c_rv ov965x_init_regs[] = {
286 { REG_COM2, 0x10 }, /* Set soft sleep mode */
287 { REG_COM5, 0x00 }, /* System clock options */
288 { REG_COM2, 0x01 }, /* Output drive, soft sleep mode */
289 { REG_COM10, 0x00 }, /* Slave mode, HREF vs HSYNC, signals negate */
290 { REG_EDGE, 0xa6 }, /* Edge enhancement treshhold and factor */
291 { REG_COM16, 0x02 }, /* Color matrix coeff double option */
292 { REG_COM17, 0x08 }, /* Single frame out, banding filter */
293 { 0x16, 0x06 },
294 { REG_CHLF, 0xc0 }, /* Reserved */
295 { 0x34, 0xbf },
296 { 0xa8, 0x80 },
297 { 0x96, 0x04 },
298 { 0x8e, 0x00 },
299 { REG_COM12, 0x77 }, /* HREF option, UV average */
300 { 0x8b, 0x06 },
301 { 0x35, 0x91 },
302 { 0x94, 0x88 },
303 { 0x95, 0x88 },
304 { REG_COM15, 0xc1 }, /* Output range, RGB 555/565 */
305 { REG_GRCOM, 0x2f }, /* Analog BLC & regulator */
306 { REG_COM6, 0x43 }, /* HREF & ADBLC options */
307 { REG_COM8, 0xe5 }, /* AGC/AEC options */
308 { REG_COM13, 0x90 }, /* Gamma selection, colour matrix, UV delay */
309 { REG_HV, 0x80 }, /* Manual banding filter MSB */
310 { 0x5c, 0x96 }, /* Reserved up to 0xa5 */
311 { 0x5d, 0x96 },
312 { 0x5e, 0x10 },
313 { 0x59, 0xeb },
314 { 0x5a, 0x9c },
315 { 0x5b, 0x55 },
316 { 0x43, 0xf0 },
317 { 0x44, 0x10 },
318 { 0x45, 0x55 },
319 { 0x46, 0x86 },
320 { 0x47, 0x64 },
321 { 0x48, 0x86 },
322 { 0x5f, 0xe0 },
323 { 0x60, 0x8c },
324 { 0x61, 0x20 },
325 { 0xa5, 0xd9 },
326 { 0xa4, 0x74 }, /* reserved */
327 { REG_COM23, 0x02 }, /* Color gain analog/_digital_ */
328 { REG_COM8, 0xe7 }, /* Enable AEC, AWB, AEC */
329 { REG_COM22, 0x23 }, /* Edge enhancement, denoising */
330 { 0xa9, 0xb8 },
331 { 0xaa, 0x92 },
332 { 0xab, 0x0a },
333 { REG_DBLC1, 0xdf }, /* Digital BLC */
334 { REG_DBLC_B, 0x00 }, /* Digital BLC B chan offset */
335 { REG_DBLC_R, 0x00 }, /* Digital BLC R chan offset */
336 { REG_DBLC_GB, 0x00 }, /* Digital BLC GB chan offset */
337 { REG_DBLC_GR, 0x00 },
338 { REG_COM9, 0x3a }, /* Gain ceiling 16x */
339 { REG_NULL, 0 }
342 #define NUM_FMT_REGS 14
344 * COM7, COM3, COM4, HSTART, HSTOP, HREF, VSTART, VSTOP, VREF,
345 * EXHCH, EXHCL, ADC, OCOM, OFON
347 static const u8 frame_size_reg_addr[NUM_FMT_REGS] = {
348 0x12, 0x0c, 0x0d, 0x17, 0x18, 0x32, 0x19, 0x1a, 0x03,
349 0x2a, 0x2b, 0x37, 0x38, 0x39,
352 static const u8 ov965x_sxga_regs[NUM_FMT_REGS] = {
353 0x00, 0x00, 0x00, 0x1e, 0xbe, 0xbf, 0x01, 0x81, 0x12,
354 0x10, 0x34, 0x81, 0x93, 0x51,
357 static const u8 ov965x_vga_regs[NUM_FMT_REGS] = {
358 0x40, 0x04, 0x80, 0x26, 0xc6, 0xed, 0x01, 0x3d, 0x00,
359 0x10, 0x40, 0x91, 0x12, 0x43,
362 /* Determined empirically. */
363 static const u8 ov965x_qvga_regs[NUM_FMT_REGS] = {
364 0x10, 0x04, 0x80, 0x25, 0xc5, 0xbf, 0x00, 0x80, 0x12,
365 0x10, 0x40, 0x91, 0x12, 0x43,
368 static const struct ov965x_framesize ov965x_framesizes[] = {
370 .width = SXGA_WIDTH,
371 .height = SXGA_HEIGHT,
372 .regs = ov965x_sxga_regs,
373 .max_exp_lines = 1048,
374 }, {
375 .width = VGA_WIDTH,
376 .height = VGA_HEIGHT,
377 .regs = ov965x_vga_regs,
378 .max_exp_lines = 498,
379 }, {
380 .width = QVGA_WIDTH,
381 .height = QVGA_HEIGHT,
382 .regs = ov965x_qvga_regs,
383 .max_exp_lines = 248,
387 struct ov965x_pixfmt {
388 u32 code;
389 u32 colorspace;
390 /* REG_TSLB value, only bits [3:2] may be set. */
391 u8 tslb_reg;
394 static const struct ov965x_pixfmt ov965x_formats[] = {
395 { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 0x00},
396 { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG, 0x04},
397 { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG, 0x0c},
398 { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG, 0x08},
402 * This table specifies possible frame resolution and interval
403 * combinations. Default CLKRC[5:0] divider values are valid
404 * only for 24 MHz external clock frequency.
406 static struct ov965x_interval ov965x_intervals[] = {
407 {{ 100, 625 }, { SXGA_WIDTH, SXGA_HEIGHT }, 0 }, /* 6.25 fps */
408 {{ 10, 125 }, { VGA_WIDTH, VGA_HEIGHT }, 1 }, /* 12.5 fps */
409 {{ 10, 125 }, { QVGA_WIDTH, QVGA_HEIGHT }, 3 }, /* 12.5 fps */
410 {{ 1, 25 }, { VGA_WIDTH, VGA_HEIGHT }, 0 }, /* 25 fps */
411 {{ 1, 25 }, { QVGA_WIDTH, QVGA_HEIGHT }, 1 }, /* 25 fps */
414 static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
416 return &container_of(ctrl->handler, struct ov965x, ctrls.handler)->sd;
419 static inline struct ov965x *to_ov965x(struct v4l2_subdev *sd)
421 return container_of(sd, struct ov965x, sd);
424 static int ov965x_read(struct i2c_client *client, u8 addr, u8 *val)
426 u8 buf = addr;
427 struct i2c_msg msg = {
428 .addr = client->addr,
429 .flags = 0,
430 .len = 1,
431 .buf = &buf
433 int ret;
435 ret = i2c_transfer(client->adapter, &msg, 1);
436 if (ret == 1) {
437 msg.flags = I2C_M_RD;
438 ret = i2c_transfer(client->adapter, &msg, 1);
440 if (ret == 1)
441 *val = buf;
444 v4l2_dbg(2, debug, client, "%s: 0x%02x @ 0x%02x. (%d)\n",
445 __func__, *val, addr, ret);
447 return ret == 1 ? 0 : ret;
450 static int ov965x_write(struct i2c_client *client, u8 addr, u8 val)
452 u8 buf[2] = { addr, val };
454 int ret = i2c_master_send(client, buf, 2);
456 v4l2_dbg(2, debug, client, "%s: 0x%02x @ 0x%02X (%d)\n",
457 __func__, val, addr, ret);
459 return ret == 2 ? 0 : ret;
462 static int ov965x_write_array(struct i2c_client *client,
463 const struct i2c_rv *regs)
465 int i, ret = 0;
467 for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
468 ret = ov965x_write(client, regs[i].addr, regs[i].value);
470 return ret;
473 static int ov965x_set_default_gamma_curve(struct ov965x *ov965x)
475 static const u8 gamma_curve[] = {
476 /* Values taken from OV application note. */
477 0x40, 0x30, 0x4b, 0x60, 0x70, 0x70, 0x70, 0x70,
478 0x60, 0x60, 0x50, 0x48, 0x3a, 0x2e, 0x28, 0x22,
479 0x04, 0x07, 0x10, 0x28, 0x36, 0x44, 0x52, 0x60,
480 0x6c, 0x78, 0x8c, 0x9e, 0xbb, 0xd2, 0xe6
482 u8 addr = REG_GSP;
483 unsigned int i;
485 for (i = 0; i < ARRAY_SIZE(gamma_curve); i++) {
486 int ret = ov965x_write(ov965x->client, addr, gamma_curve[i]);
488 if (ret < 0)
489 return ret;
490 addr++;
493 return 0;
496 static int ov965x_set_color_matrix(struct ov965x *ov965x)
498 static const u8 mtx[] = {
499 /* MTX1..MTX9, MTXS */
500 0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38, 0x40, 0x40, 0x40, 0x0d
502 u8 addr = REG_MTX(1);
503 unsigned int i;
505 for (i = 0; i < ARRAY_SIZE(mtx); i++) {
506 int ret = ov965x_write(ov965x->client, addr, mtx[i]);
508 if (ret < 0)
509 return ret;
510 addr++;
513 return 0;
516 static void ov965x_gpio_set(int gpio, int val)
518 if (gpio_is_valid(gpio))
519 gpio_set_value(gpio, val);
522 static void __ov965x_set_power(struct ov965x *ov965x, int on)
524 if (on) {
525 ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 0);
526 ov965x_gpio_set(ov965x->gpios[GPIO_RST], 0);
527 msleep(25);
528 } else {
529 ov965x_gpio_set(ov965x->gpios[GPIO_RST], 1);
530 ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 1);
533 ov965x->streaming = 0;
536 static int ov965x_s_power(struct v4l2_subdev *sd, int on)
538 struct ov965x *ov965x = to_ov965x(sd);
539 struct i2c_client *client = ov965x->client;
540 int ret = 0;
542 v4l2_dbg(1, debug, client, "%s: on: %d\n", __func__, on);
544 mutex_lock(&ov965x->lock);
545 if (ov965x->power == !on) {
546 __ov965x_set_power(ov965x, on);
547 if (on) {
548 ret = ov965x_write_array(client,
549 ov965x_init_regs);
550 ov965x->apply_frame_fmt = 1;
551 ov965x->ctrls.update = 1;
554 if (!ret)
555 ov965x->power += on ? 1 : -1;
557 WARN_ON(ov965x->power < 0);
558 mutex_unlock(&ov965x->lock);
559 return ret;
563 * V4L2 controls
566 static void ov965x_update_exposure_ctrl(struct ov965x *ov965x)
568 struct v4l2_ctrl *ctrl = ov965x->ctrls.exposure;
569 unsigned long fint, trow;
570 int min, max, def;
571 u8 clkrc;
573 mutex_lock(&ov965x->lock);
574 if (WARN_ON(!ctrl || !ov965x->frame_size)) {
575 mutex_unlock(&ov965x->lock);
576 return;
578 clkrc = DEF_CLKRC + ov965x->fiv->clkrc_div;
579 /* Calculate internal clock frequency */
580 fint = ov965x->mclk_frequency * ((clkrc >> 7) + 1) /
581 ((2 * ((clkrc & 0x3f) + 1)));
582 /* and the row interval (in us). */
583 trow = (2 * 1520 * 1000000UL) / fint;
584 max = ov965x->frame_size->max_exp_lines * trow;
585 ov965x->exp_row_interval = trow;
586 mutex_unlock(&ov965x->lock);
588 v4l2_dbg(1, debug, &ov965x->sd, "clkrc: %#x, fi: %lu, tr: %lu, %d\n",
589 clkrc, fint, trow, max);
591 /* Update exposure time range to match current frame format. */
592 min = (trow + 100) / 100;
593 max = (max - 100) / 100;
594 def = min + (max - min) / 2;
596 if (v4l2_ctrl_modify_range(ctrl, min, max, 1, def))
597 v4l2_err(&ov965x->sd, "Exposure ctrl range update failed\n");
600 static int ov965x_set_banding_filter(struct ov965x *ov965x, int value)
602 unsigned long mbd, light_freq;
603 int ret;
604 u8 reg;
606 ret = ov965x_read(ov965x->client, REG_COM8, &reg);
607 if (!ret) {
608 if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED)
609 reg &= ~COM8_BFILT;
610 else
611 reg |= COM8_BFILT;
612 ret = ov965x_write(ov965x->client, REG_COM8, reg);
614 if (value == V4L2_CID_POWER_LINE_FREQUENCY_DISABLED)
615 return 0;
616 if (WARN_ON(!ov965x->fiv))
617 return -EINVAL;
618 /* Set minimal exposure time for 50/60 HZ lighting */
619 if (value == V4L2_CID_POWER_LINE_FREQUENCY_50HZ)
620 light_freq = 50;
621 else
622 light_freq = 60;
623 mbd = (1000UL * ov965x->fiv->interval.denominator *
624 ov965x->frame_size->max_exp_lines) /
625 ov965x->fiv->interval.numerator;
626 mbd = ((mbd / (light_freq * 2)) + 500) / 1000UL;
628 return ov965x_write(ov965x->client, REG_MBD, mbd);
631 static int ov965x_set_white_balance(struct ov965x *ov965x, int awb)
633 int ret;
634 u8 reg;
636 ret = ov965x_read(ov965x->client, REG_COM8, &reg);
637 if (!ret) {
638 reg = awb ? reg | REG_COM8 : reg & ~REG_COM8;
639 ret = ov965x_write(ov965x->client, REG_COM8, reg);
641 if (!ret && !awb) {
642 ret = ov965x_write(ov965x->client, REG_BLUE,
643 ov965x->ctrls.blue_balance->val);
644 if (ret < 0)
645 return ret;
646 ret = ov965x_write(ov965x->client, REG_RED,
647 ov965x->ctrls.red_balance->val);
649 return ret;
652 #define NUM_BR_LEVELS 7
653 #define NUM_BR_REGS 3
655 static int ov965x_set_brightness(struct ov965x *ov965x, int val)
657 static const u8 regs[NUM_BR_LEVELS + 1][NUM_BR_REGS] = {
658 { REG_AEW, REG_AEB, REG_VPT },
659 { 0x1c, 0x12, 0x50 }, /* -3 */
660 { 0x3d, 0x30, 0x71 }, /* -2 */
661 { 0x50, 0x44, 0x92 }, /* -1 */
662 { 0x70, 0x64, 0xc3 }, /* 0 */
663 { 0x90, 0x84, 0xd4 }, /* +1 */
664 { 0xc4, 0xbf, 0xf9 }, /* +2 */
665 { 0xd8, 0xd0, 0xfa }, /* +3 */
667 int i, ret = 0;
669 val += (NUM_BR_LEVELS / 2 + 1);
670 if (val > NUM_BR_LEVELS)
671 return -EINVAL;
673 for (i = 0; i < NUM_BR_REGS && !ret; i++)
674 ret = ov965x_write(ov965x->client, regs[0][i],
675 regs[val][i]);
676 return ret;
679 static int ov965x_set_gain(struct ov965x *ov965x, int auto_gain)
681 struct i2c_client *client = ov965x->client;
682 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
683 int ret = 0;
684 u8 reg;
686 * For manual mode we need to disable AGC first, so
687 * gain value in REG_VREF, REG_GAIN is not overwritten.
689 if (ctrls->auto_gain->is_new) {
690 ret = ov965x_read(client, REG_COM8, &reg);
691 if (ret < 0)
692 return ret;
693 if (ctrls->auto_gain->val)
694 reg |= COM8_AGC;
695 else
696 reg &= ~COM8_AGC;
697 ret = ov965x_write(client, REG_COM8, reg);
698 if (ret < 0)
699 return ret;
702 if (ctrls->gain->is_new && !auto_gain) {
703 unsigned int gain = ctrls->gain->val;
704 unsigned int rgain;
705 int m;
707 * Convert gain control value to the sensor's gain
708 * registers (VREF[7:6], GAIN[7:0]) format.
710 for (m = 6; m >= 0; m--)
711 if (gain >= (1 << m) * 16)
712 break;
713 rgain = (gain - ((1 << m) * 16)) / (1 << m);
714 rgain |= (((1 << m) - 1) << 4);
716 ret = ov965x_write(client, REG_GAIN, rgain & 0xff);
717 if (ret < 0)
718 return ret;
719 ret = ov965x_read(client, REG_VREF, &reg);
720 if (ret < 0)
721 return ret;
722 reg &= ~VREF_GAIN_MASK;
723 reg |= (((rgain >> 8) & 0x3) << 6);
724 ret = ov965x_write(client, REG_VREF, reg);
725 if (ret < 0)
726 return ret;
727 /* Return updated control's value to userspace */
728 ctrls->gain->val = (1 << m) * (16 + (rgain & 0xf));
731 return ret;
734 static int ov965x_set_sharpness(struct ov965x *ov965x, unsigned int value)
736 u8 com14, edge;
737 int ret;
739 ret = ov965x_read(ov965x->client, REG_COM14, &com14);
740 if (ret < 0)
741 return ret;
742 ret = ov965x_read(ov965x->client, REG_EDGE, &edge);
743 if (ret < 0)
744 return ret;
745 com14 = value ? com14 | COM14_EDGE_EN : com14 & ~COM14_EDGE_EN;
746 value--;
747 if (value > 0x0f) {
748 com14 |= COM14_EEF_X2;
749 value >>= 1;
750 } else {
751 com14 &= ~COM14_EEF_X2;
753 ret = ov965x_write(ov965x->client, REG_COM14, com14);
754 if (ret < 0)
755 return ret;
757 edge &= ~EDGE_FACTOR_MASK;
758 edge |= ((u8)value & 0x0f);
760 return ov965x_write(ov965x->client, REG_EDGE, edge);
763 static int ov965x_set_exposure(struct ov965x *ov965x, int exp)
765 struct i2c_client *client = ov965x->client;
766 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
767 bool auto_exposure = (exp == V4L2_EXPOSURE_AUTO);
768 int ret;
769 u8 reg;
771 if (ctrls->auto_exp->is_new) {
772 ret = ov965x_read(client, REG_COM8, &reg);
773 if (ret < 0)
774 return ret;
775 if (auto_exposure)
776 reg |= (COM8_AEC | COM8_AGC);
777 else
778 reg &= ~(COM8_AEC | COM8_AGC);
779 ret = ov965x_write(client, REG_COM8, reg);
780 if (ret < 0)
781 return ret;
784 if (!auto_exposure && ctrls->exposure->is_new) {
785 unsigned int exposure = (ctrls->exposure->val * 100)
786 / ov965x->exp_row_interval;
788 * Manual exposure value
789 * [b15:b0] - AECHM (b15:b10), AECH (b9:b2), COM1 (b1:b0)
791 ret = ov965x_write(client, REG_COM1, exposure & 0x3);
792 if (!ret)
793 ret = ov965x_write(client, REG_AECH,
794 (exposure >> 2) & 0xff);
795 if (!ret)
796 ret = ov965x_write(client, REG_AECHM,
797 (exposure >> 10) & 0x3f);
798 /* Update the value to minimize rounding errors */
799 ctrls->exposure->val = ((exposure * ov965x->exp_row_interval)
800 + 50) / 100;
801 if (ret < 0)
802 return ret;
805 v4l2_ctrl_activate(ov965x->ctrls.brightness, !exp);
806 return 0;
809 static int ov965x_set_flip(struct ov965x *ov965x)
811 u8 mvfp = 0;
813 if (ov965x->ctrls.hflip->val)
814 mvfp |= MVFP_MIRROR;
816 if (ov965x->ctrls.vflip->val)
817 mvfp |= MVFP_FLIP;
819 return ov965x_write(ov965x->client, REG_MVFP, mvfp);
822 #define NUM_SAT_LEVELS 5
823 #define NUM_SAT_REGS 6
825 static int ov965x_set_saturation(struct ov965x *ov965x, int val)
827 static const u8 regs[NUM_SAT_LEVELS][NUM_SAT_REGS] = {
828 /* MTX(1)...MTX(6) */
829 { 0x1d, 0x1f, 0x02, 0x09, 0x13, 0x1c }, /* -2 */
830 { 0x2e, 0x31, 0x02, 0x0e, 0x1e, 0x2d }, /* -1 */
831 { 0x3a, 0x3d, 0x03, 0x12, 0x26, 0x38 }, /* 0 */
832 { 0x46, 0x49, 0x04, 0x16, 0x2e, 0x43 }, /* +1 */
833 { 0x57, 0x5c, 0x05, 0x1b, 0x39, 0x54 }, /* +2 */
835 u8 addr = REG_MTX(1);
836 int i, ret = 0;
838 val += (NUM_SAT_LEVELS / 2);
839 if (val >= NUM_SAT_LEVELS)
840 return -EINVAL;
842 for (i = 0; i < NUM_SAT_REGS && !ret; i++)
843 ret = ov965x_write(ov965x->client, addr + i, regs[val][i]);
845 return ret;
848 static int ov965x_set_test_pattern(struct ov965x *ov965x, int value)
850 int ret;
851 u8 reg;
853 ret = ov965x_read(ov965x->client, REG_COM23, &reg);
854 if (ret < 0)
855 return ret;
856 reg = value ? reg | COM23_TEST_MODE : reg & ~COM23_TEST_MODE;
857 return ov965x_write(ov965x->client, REG_COM23, reg);
860 static int __g_volatile_ctrl(struct ov965x *ov965x, struct v4l2_ctrl *ctrl)
862 struct i2c_client *client = ov965x->client;
863 unsigned int exposure, gain, m;
864 u8 reg0, reg1, reg2;
865 int ret;
867 if (!ov965x->power)
868 return 0;
870 switch (ctrl->id) {
871 case V4L2_CID_AUTOGAIN:
872 if (!ctrl->val)
873 return 0;
874 ret = ov965x_read(client, REG_GAIN, &reg0);
875 if (ret < 0)
876 return ret;
877 ret = ov965x_read(client, REG_VREF, &reg1);
878 if (ret < 0)
879 return ret;
880 gain = ((reg1 >> 6) << 8) | reg0;
881 m = 0x01 << fls(gain >> 4);
882 ov965x->ctrls.gain->val = m * (16 + (gain & 0xf));
883 break;
885 case V4L2_CID_EXPOSURE_AUTO:
886 if (ctrl->val == V4L2_EXPOSURE_MANUAL)
887 return 0;
888 ret = ov965x_read(client, REG_COM1, &reg0);
889 if (ret < 0)
890 return ret;
891 ret = ov965x_read(client, REG_AECH, &reg1);
892 if (ret < 0)
893 return ret;
894 ret = ov965x_read(client, REG_AECHM, &reg2);
895 if (ret < 0)
896 return ret;
897 exposure = ((reg2 & 0x3f) << 10) | (reg1 << 2) |
898 (reg0 & 0x3);
899 ov965x->ctrls.exposure->val = ((exposure *
900 ov965x->exp_row_interval) + 50) / 100;
901 break;
904 return 0;
907 static int ov965x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
909 struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
910 struct ov965x *ov965x = to_ov965x(sd);
911 int ret;
913 v4l2_dbg(1, debug, sd, "g_ctrl: %s\n", ctrl->name);
915 mutex_lock(&ov965x->lock);
916 ret = __g_volatile_ctrl(ov965x, ctrl);
917 mutex_unlock(&ov965x->lock);
918 return ret;
921 static int ov965x_s_ctrl(struct v4l2_ctrl *ctrl)
923 struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
924 struct ov965x *ov965x = to_ov965x(sd);
925 int ret = -EINVAL;
927 v4l2_dbg(1, debug, sd, "s_ctrl: %s, value: %d. power: %d\n",
928 ctrl->name, ctrl->val, ov965x->power);
930 mutex_lock(&ov965x->lock);
932 * If the device is not powered up now postpone applying control's
933 * value to the hardware, until it is ready to accept commands.
935 if (ov965x->power == 0) {
936 mutex_unlock(&ov965x->lock);
937 return 0;
940 switch (ctrl->id) {
941 case V4L2_CID_AUTO_WHITE_BALANCE:
942 ret = ov965x_set_white_balance(ov965x, ctrl->val);
943 break;
945 case V4L2_CID_BRIGHTNESS:
946 ret = ov965x_set_brightness(ov965x, ctrl->val);
947 break;
949 case V4L2_CID_EXPOSURE_AUTO:
950 ret = ov965x_set_exposure(ov965x, ctrl->val);
951 break;
953 case V4L2_CID_AUTOGAIN:
954 ret = ov965x_set_gain(ov965x, ctrl->val);
955 break;
957 case V4L2_CID_HFLIP:
958 ret = ov965x_set_flip(ov965x);
959 break;
961 case V4L2_CID_POWER_LINE_FREQUENCY:
962 ret = ov965x_set_banding_filter(ov965x, ctrl->val);
963 break;
965 case V4L2_CID_SATURATION:
966 ret = ov965x_set_saturation(ov965x, ctrl->val);
967 break;
969 case V4L2_CID_SHARPNESS:
970 ret = ov965x_set_sharpness(ov965x, ctrl->val);
971 break;
973 case V4L2_CID_TEST_PATTERN:
974 ret = ov965x_set_test_pattern(ov965x, ctrl->val);
975 break;
978 mutex_unlock(&ov965x->lock);
979 return ret;
982 static const struct v4l2_ctrl_ops ov965x_ctrl_ops = {
983 .g_volatile_ctrl = ov965x_g_volatile_ctrl,
984 .s_ctrl = ov965x_s_ctrl,
987 static const char * const test_pattern_menu[] = {
988 "Disabled",
989 "Color bars",
992 static int ov965x_initialize_controls(struct ov965x *ov965x)
994 const struct v4l2_ctrl_ops *ops = &ov965x_ctrl_ops;
995 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
996 struct v4l2_ctrl_handler *hdl = &ctrls->handler;
997 int ret;
999 ret = v4l2_ctrl_handler_init(hdl, 16);
1000 if (ret < 0)
1001 return ret;
1003 /* Auto/manual white balance */
1004 ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
1005 V4L2_CID_AUTO_WHITE_BALANCE,
1006 0, 1, 1, 1);
1007 ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE,
1008 0, 0xff, 1, 0x80);
1009 ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE,
1010 0, 0xff, 1, 0x80);
1011 /* Auto/manual exposure */
1012 ctrls->auto_exp =
1013 v4l2_ctrl_new_std_menu(hdl, ops,
1014 V4L2_CID_EXPOSURE_AUTO,
1015 V4L2_EXPOSURE_MANUAL, 0,
1016 V4L2_EXPOSURE_AUTO);
1017 /* Exposure time, in 100 us units. min/max is updated dynamically. */
1018 ctrls->exposure = v4l2_ctrl_new_std(hdl, ops,
1019 V4L2_CID_EXPOSURE_ABSOLUTE,
1020 2, 1500, 1, 500);
1021 /* Auto/manual gain */
1022 ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
1023 0, 1, 1, 1);
1024 ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
1025 16, 64 * (16 + 15), 1, 64 * 16);
1027 ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,
1028 -2, 2, 1, 0);
1029 ctrls->brightness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS,
1030 -3, 3, 1, 0);
1031 ctrls->sharpness = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS,
1032 0, 32, 1, 6);
1034 ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
1035 ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
1037 ctrls->light_freq =
1038 v4l2_ctrl_new_std_menu(hdl, ops,
1039 V4L2_CID_POWER_LINE_FREQUENCY,
1040 V4L2_CID_POWER_LINE_FREQUENCY_60HZ, ~0x7,
1041 V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
1043 v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
1044 ARRAY_SIZE(test_pattern_menu) - 1, 0, 0,
1045 test_pattern_menu);
1046 if (hdl->error) {
1047 ret = hdl->error;
1048 v4l2_ctrl_handler_free(hdl);
1049 return ret;
1052 ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
1053 ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
1055 v4l2_ctrl_auto_cluster(3, &ctrls->auto_wb, 0, false);
1056 v4l2_ctrl_auto_cluster(2, &ctrls->auto_gain, 0, true);
1057 v4l2_ctrl_auto_cluster(2, &ctrls->auto_exp, 1, true);
1058 v4l2_ctrl_cluster(2, &ctrls->hflip);
1060 ov965x->sd.ctrl_handler = hdl;
1061 return 0;
1065 * V4L2 subdev video and pad level operations
1067 static void ov965x_get_default_format(struct v4l2_mbus_framefmt *mf)
1069 mf->width = ov965x_framesizes[0].width;
1070 mf->height = ov965x_framesizes[0].height;
1071 mf->colorspace = ov965x_formats[0].colorspace;
1072 mf->code = ov965x_formats[0].code;
1073 mf->field = V4L2_FIELD_NONE;
1076 static int ov965x_enum_mbus_code(struct v4l2_subdev *sd,
1077 struct v4l2_subdev_pad_config *cfg,
1078 struct v4l2_subdev_mbus_code_enum *code)
1080 if (code->index >= ARRAY_SIZE(ov965x_formats))
1081 return -EINVAL;
1083 code->code = ov965x_formats[code->index].code;
1084 return 0;
1087 static int ov965x_enum_frame_sizes(struct v4l2_subdev *sd,
1088 struct v4l2_subdev_pad_config *cfg,
1089 struct v4l2_subdev_frame_size_enum *fse)
1091 int i = ARRAY_SIZE(ov965x_formats);
1093 if (fse->index >= ARRAY_SIZE(ov965x_framesizes))
1094 return -EINVAL;
1096 while (--i)
1097 if (fse->code == ov965x_formats[i].code)
1098 break;
1100 fse->code = ov965x_formats[i].code;
1102 fse->min_width = ov965x_framesizes[fse->index].width;
1103 fse->max_width = fse->min_width;
1104 fse->max_height = ov965x_framesizes[fse->index].height;
1105 fse->min_height = fse->max_height;
1107 return 0;
1110 static int ov965x_g_frame_interval(struct v4l2_subdev *sd,
1111 struct v4l2_subdev_frame_interval *fi)
1113 struct ov965x *ov965x = to_ov965x(sd);
1115 mutex_lock(&ov965x->lock);
1116 fi->interval = ov965x->fiv->interval;
1117 mutex_unlock(&ov965x->lock);
1119 return 0;
1122 static int __ov965x_set_frame_interval(struct ov965x *ov965x,
1123 struct v4l2_subdev_frame_interval *fi)
1125 struct v4l2_mbus_framefmt *mbus_fmt = &ov965x->format;
1126 const struct ov965x_interval *fiv = &ov965x_intervals[0];
1127 u64 req_int, err, min_err = ~0ULL;
1128 unsigned int i;
1130 if (fi->interval.denominator == 0)
1131 return -EINVAL;
1133 req_int = (u64)(fi->interval.numerator * 10000) /
1134 fi->interval.denominator;
1136 for (i = 0; i < ARRAY_SIZE(ov965x_intervals); i++) {
1137 const struct ov965x_interval *iv = &ov965x_intervals[i];
1139 if (mbus_fmt->width != iv->size.width ||
1140 mbus_fmt->height != iv->size.height)
1141 continue;
1142 err = abs((u64)(iv->interval.numerator * 10000) /
1143 iv->interval.denominator - req_int);
1144 if (err < min_err) {
1145 fiv = iv;
1146 min_err = err;
1149 ov965x->fiv = fiv;
1151 v4l2_dbg(1, debug, &ov965x->sd, "Changed frame interval to %u us\n",
1152 fiv->interval.numerator * 1000000 / fiv->interval.denominator);
1154 return 0;
1157 static int ov965x_s_frame_interval(struct v4l2_subdev *sd,
1158 struct v4l2_subdev_frame_interval *fi)
1160 struct ov965x *ov965x = to_ov965x(sd);
1161 int ret;
1163 v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n",
1164 fi->interval.numerator, fi->interval.denominator);
1166 mutex_lock(&ov965x->lock);
1167 ret = __ov965x_set_frame_interval(ov965x, fi);
1168 ov965x->apply_frame_fmt = 1;
1169 mutex_unlock(&ov965x->lock);
1170 return ret;
1173 static int ov965x_get_fmt(struct v4l2_subdev *sd,
1174 struct v4l2_subdev_pad_config *cfg,
1175 struct v4l2_subdev_format *fmt)
1177 struct ov965x *ov965x = to_ov965x(sd);
1178 struct v4l2_mbus_framefmt *mf;
1180 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
1181 mf = v4l2_subdev_get_try_format(sd, cfg, 0);
1182 fmt->format = *mf;
1183 return 0;
1186 mutex_lock(&ov965x->lock);
1187 fmt->format = ov965x->format;
1188 mutex_unlock(&ov965x->lock);
1190 return 0;
1193 static void __ov965x_try_frame_size(struct v4l2_mbus_framefmt *mf,
1194 const struct ov965x_framesize **size)
1196 const struct ov965x_framesize *fsize = &ov965x_framesizes[0],
1197 *match = NULL;
1198 int i = ARRAY_SIZE(ov965x_framesizes);
1199 unsigned int min_err = UINT_MAX;
1201 while (i--) {
1202 int err = abs(fsize->width - mf->width)
1203 + abs(fsize->height - mf->height);
1204 if (err < min_err) {
1205 min_err = err;
1206 match = fsize;
1208 fsize++;
1210 if (!match)
1211 match = &ov965x_framesizes[0];
1212 mf->width = match->width;
1213 mf->height = match->height;
1214 if (size)
1215 *size = match;
1218 static int ov965x_set_fmt(struct v4l2_subdev *sd,
1219 struct v4l2_subdev_pad_config *cfg,
1220 struct v4l2_subdev_format *fmt)
1222 unsigned int index = ARRAY_SIZE(ov965x_formats);
1223 struct v4l2_mbus_framefmt *mf = &fmt->format;
1224 struct ov965x *ov965x = to_ov965x(sd);
1225 const struct ov965x_framesize *size = NULL;
1226 int ret = 0;
1228 __ov965x_try_frame_size(mf, &size);
1230 while (--index)
1231 if (ov965x_formats[index].code == mf->code)
1232 break;
1234 mf->colorspace = V4L2_COLORSPACE_JPEG;
1235 mf->code = ov965x_formats[index].code;
1236 mf->field = V4L2_FIELD_NONE;
1238 mutex_lock(&ov965x->lock);
1240 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
1241 if (cfg) {
1242 mf = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
1243 *mf = fmt->format;
1245 } else {
1246 if (ov965x->streaming) {
1247 ret = -EBUSY;
1248 } else {
1249 ov965x->frame_size = size;
1250 ov965x->format = fmt->format;
1251 ov965x->tslb_reg = ov965x_formats[index].tslb_reg;
1252 ov965x->apply_frame_fmt = 1;
1256 if (!ret && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
1257 struct v4l2_subdev_frame_interval fiv = {
1258 .interval = { 0, 1 }
1260 /* Reset to minimum possible frame interval */
1261 __ov965x_set_frame_interval(ov965x, &fiv);
1263 mutex_unlock(&ov965x->lock);
1265 if (!ret)
1266 ov965x_update_exposure_ctrl(ov965x);
1268 return ret;
1271 static int ov965x_set_frame_size(struct ov965x *ov965x)
1273 int i, ret = 0;
1275 for (i = 0; ret == 0 && i < NUM_FMT_REGS; i++)
1276 ret = ov965x_write(ov965x->client, frame_size_reg_addr[i],
1277 ov965x->frame_size->regs[i]);
1278 return ret;
1281 static int __ov965x_set_params(struct ov965x *ov965x)
1283 struct i2c_client *client = ov965x->client;
1284 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
1285 int ret = 0;
1286 u8 reg;
1288 if (ov965x->apply_frame_fmt) {
1289 reg = DEF_CLKRC + ov965x->fiv->clkrc_div;
1290 ret = ov965x_write(client, REG_CLKRC, reg);
1291 if (ret < 0)
1292 return ret;
1293 ret = ov965x_set_frame_size(ov965x);
1294 if (ret < 0)
1295 return ret;
1296 ret = ov965x_read(client, REG_TSLB, &reg);
1297 if (ret < 0)
1298 return ret;
1299 reg &= ~TSLB_YUYV_MASK;
1300 reg |= ov965x->tslb_reg;
1301 ret = ov965x_write(client, REG_TSLB, reg);
1302 if (ret < 0)
1303 return ret;
1305 ret = ov965x_set_default_gamma_curve(ov965x);
1306 if (ret < 0)
1307 return ret;
1308 ret = ov965x_set_color_matrix(ov965x);
1309 if (ret < 0)
1310 return ret;
1312 * Select manual banding filter, the filter will
1313 * be enabled further if required.
1315 ret = ov965x_read(client, REG_COM11, &reg);
1316 if (!ret)
1317 reg |= COM11_BANDING;
1318 ret = ov965x_write(client, REG_COM11, reg);
1319 if (ret < 0)
1320 return ret;
1322 * Banding filter (REG_MBD value) needs to match selected
1323 * resolution and frame rate, so it's always updated here.
1325 return ov965x_set_banding_filter(ov965x, ctrls->light_freq->val);
1328 static int ov965x_s_stream(struct v4l2_subdev *sd, int on)
1330 struct i2c_client *client = v4l2_get_subdevdata(sd);
1331 struct ov965x *ov965x = to_ov965x(sd);
1332 struct ov965x_ctrls *ctrls = &ov965x->ctrls;
1333 int ret = 0;
1335 v4l2_dbg(1, debug, client, "%s: on: %d\n", __func__, on);
1337 mutex_lock(&ov965x->lock);
1338 if (ov965x->streaming == !on) {
1339 if (on)
1340 ret = __ov965x_set_params(ov965x);
1342 if (!ret && ctrls->update) {
1344 * ov965x_s_ctrl callback takes the mutex
1345 * so it needs to be released here.
1347 mutex_unlock(&ov965x->lock);
1348 ret = v4l2_ctrl_handler_setup(&ctrls->handler);
1350 mutex_lock(&ov965x->lock);
1351 if (!ret)
1352 ctrls->update = 0;
1354 if (!ret)
1355 ret = ov965x_write(client, REG_COM2,
1356 on ? 0x01 : 0x11);
1358 if (!ret)
1359 ov965x->streaming += on ? 1 : -1;
1361 WARN_ON(ov965x->streaming < 0);
1362 mutex_unlock(&ov965x->lock);
1364 return ret;
1368 * V4L2 subdev internal operations
1370 static int ov965x_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
1372 struct v4l2_mbus_framefmt *mf =
1373 v4l2_subdev_get_try_format(sd, fh->pad, 0);
1375 ov965x_get_default_format(mf);
1376 return 0;
1379 static const struct v4l2_subdev_pad_ops ov965x_pad_ops = {
1380 .enum_mbus_code = ov965x_enum_mbus_code,
1381 .enum_frame_size = ov965x_enum_frame_sizes,
1382 .get_fmt = ov965x_get_fmt,
1383 .set_fmt = ov965x_set_fmt,
1386 static const struct v4l2_subdev_video_ops ov965x_video_ops = {
1387 .s_stream = ov965x_s_stream,
1388 .g_frame_interval = ov965x_g_frame_interval,
1389 .s_frame_interval = ov965x_s_frame_interval,
1393 static const struct v4l2_subdev_internal_ops ov965x_sd_internal_ops = {
1394 .open = ov965x_open,
1397 static const struct v4l2_subdev_core_ops ov965x_core_ops = {
1398 .s_power = ov965x_s_power,
1399 .log_status = v4l2_ctrl_subdev_log_status,
1400 .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
1401 .unsubscribe_event = v4l2_event_subdev_unsubscribe,
1404 static const struct v4l2_subdev_ops ov965x_subdev_ops = {
1405 .core = &ov965x_core_ops,
1406 .pad = &ov965x_pad_ops,
1407 .video = &ov965x_video_ops,
1411 * Reset and power down GPIOs configuration
1413 static int ov965x_configure_gpios(struct ov965x *ov965x,
1414 const struct ov9650_platform_data *pdata)
1416 int ret, i;
1418 ov965x->gpios[GPIO_PWDN] = pdata->gpio_pwdn;
1419 ov965x->gpios[GPIO_RST] = pdata->gpio_reset;
1421 for (i = 0; i < ARRAY_SIZE(ov965x->gpios); i++) {
1422 int gpio = ov965x->gpios[i];
1424 if (!gpio_is_valid(gpio))
1425 continue;
1426 ret = devm_gpio_request_one(&ov965x->client->dev, gpio,
1427 GPIOF_OUT_INIT_HIGH, "OV965X");
1428 if (ret < 0)
1429 return ret;
1430 v4l2_dbg(1, debug, &ov965x->sd, "set gpio %d to 1\n", gpio);
1432 gpio_set_value(gpio, 1);
1433 gpio_export(gpio, 0);
1434 ov965x->gpios[i] = gpio;
1437 return 0;
1440 static int ov965x_detect_sensor(struct v4l2_subdev *sd)
1442 struct i2c_client *client = v4l2_get_subdevdata(sd);
1443 struct ov965x *ov965x = to_ov965x(sd);
1444 u8 pid, ver;
1445 int ret;
1447 mutex_lock(&ov965x->lock);
1448 __ov965x_set_power(ov965x, 1);
1449 msleep(25);
1451 /* Check sensor revision */
1452 ret = ov965x_read(client, REG_PID, &pid);
1453 if (!ret)
1454 ret = ov965x_read(client, REG_VER, &ver);
1456 __ov965x_set_power(ov965x, 0);
1458 if (!ret) {
1459 ov965x->id = OV965X_ID(pid, ver);
1460 if (ov965x->id == OV9650_ID || ov965x->id == OV9652_ID) {
1461 v4l2_info(sd, "Found OV%04X sensor\n", ov965x->id);
1462 } else {
1463 v4l2_err(sd, "Sensor detection failed (%04X, %d)\n",
1464 ov965x->id, ret);
1465 ret = -ENODEV;
1468 mutex_unlock(&ov965x->lock);
1470 return ret;
1473 static int ov965x_probe(struct i2c_client *client,
1474 const struct i2c_device_id *id)
1476 const struct ov9650_platform_data *pdata = client->dev.platform_data;
1477 struct v4l2_subdev *sd;
1478 struct ov965x *ov965x;
1479 int ret;
1481 if (!pdata) {
1482 dev_err(&client->dev, "platform data not specified\n");
1483 return -EINVAL;
1486 if (pdata->mclk_frequency == 0) {
1487 dev_err(&client->dev, "MCLK frequency not specified\n");
1488 return -EINVAL;
1491 ov965x = devm_kzalloc(&client->dev, sizeof(*ov965x), GFP_KERNEL);
1492 if (!ov965x)
1493 return -ENOMEM;
1495 mutex_init(&ov965x->lock);
1496 ov965x->client = client;
1497 ov965x->mclk_frequency = pdata->mclk_frequency;
1499 sd = &ov965x->sd;
1500 v4l2_i2c_subdev_init(sd, client, &ov965x_subdev_ops);
1501 strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name));
1503 sd->internal_ops = &ov965x_sd_internal_ops;
1504 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
1505 V4L2_SUBDEV_FL_HAS_EVENTS;
1507 ret = ov965x_configure_gpios(ov965x, pdata);
1508 if (ret < 0)
1509 goto err_mutex;
1511 ov965x->pad.flags = MEDIA_PAD_FL_SOURCE;
1512 sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
1513 ret = media_entity_pads_init(&sd->entity, 1, &ov965x->pad);
1514 if (ret < 0)
1515 goto err_mutex;
1517 ret = ov965x_initialize_controls(ov965x);
1518 if (ret < 0)
1519 goto err_me;
1521 ov965x_get_default_format(&ov965x->format);
1522 ov965x->frame_size = &ov965x_framesizes[0];
1523 ov965x->fiv = &ov965x_intervals[0];
1525 ret = ov965x_detect_sensor(sd);
1526 if (ret < 0)
1527 goto err_ctrls;
1529 /* Update exposure time min/max to match frame format */
1530 ov965x_update_exposure_ctrl(ov965x);
1532 ret = v4l2_async_register_subdev(sd);
1533 if (ret < 0)
1534 goto err_ctrls;
1536 return 0;
1537 err_ctrls:
1538 v4l2_ctrl_handler_free(sd->ctrl_handler);
1539 err_me:
1540 media_entity_cleanup(&sd->entity);
1541 err_mutex:
1542 mutex_destroy(&ov965x->lock);
1543 return ret;
1546 static int ov965x_remove(struct i2c_client *client)
1548 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1549 struct ov965x *ov965x = to_ov965x(sd);
1551 v4l2_async_unregister_subdev(sd);
1552 v4l2_ctrl_handler_free(sd->ctrl_handler);
1553 media_entity_cleanup(&sd->entity);
1554 mutex_destroy(&ov965x->lock);
1556 return 0;
1559 static const struct i2c_device_id ov965x_id[] = {
1560 { "OV9650", 0 },
1561 { "OV9652", 0 },
1562 { /* sentinel */ }
1564 MODULE_DEVICE_TABLE(i2c, ov965x_id);
1566 static struct i2c_driver ov965x_i2c_driver = {
1567 .driver = {
1568 .name = DRIVER_NAME,
1570 .probe = ov965x_probe,
1571 .remove = ov965x_remove,
1572 .id_table = ov965x_id,
1575 module_i2c_driver(ov965x_i2c_driver);
1577 MODULE_AUTHOR("Sylwester Nawrocki <sylvester.nawrocki@gmail.com>");
1578 MODULE_DESCRIPTION("OV9650/OV9652 CMOS Image Sensor driver");
1579 MODULE_LICENSE("GPL");