drivers/net/arcnet/arc-rimi.c

   1 /*
   2  * Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards
   3  *
   4  * Written 1994-1999 by Avery Pennarun.
   5  * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
   6  * Derived from skeleton.c by Donald Becker.
   7  *
   8  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
   9  *  for sponsoring the further development of this driver.
  10  *
  11  * **********************
  12  *
  13  * The original copyright of skeleton.c was as follows:
  14  *
  15  * skeleton.c Written 1993 by Donald Becker.
  16  * Copyright 1993 United States Government as represented by the
  17  * Director, National Security Agency.  This software may only be used
  18  * and distributed according to the terms of the GNU General Public License as
  19  * modified by SRC, incorporated herein by reference.
  20  *
  21  * **********************
  22  *
  23  * For more details, see drivers/net/arcnet.c
  24  *
  25  * **********************
  26  */
  27
  28 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
  29
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/moduleparam.h>
  33 #include <linux/ioport.h>
  34 #include <linux/delay.h>
  35 #include <linux/netdevice.h>
  36 #include <linux/bootmem.h>
  37 #include <linux/init.h>
  38 #include <linux/interrupt.h>
  39 #include <linux/io.h>
  40
  41 #include "arcdevice.h"
  42 #include "com9026.h"
  43
  44 /* Internal function declarations */
  45
  46 static int arcrimi_probe(struct net_device *dev);
  47 static int arcrimi_found(struct net_device *dev);
  48 static void arcrimi_command(struct net_device *dev, int command);
  49 static int arcrimi_status(struct net_device *dev);
  50 static void arcrimi_setmask(struct net_device *dev, int mask);
  51 static int arcrimi_reset(struct net_device *dev, int really_reset);
  52 static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset,
  53                                  void *buf, int count);
  54 static void arcrimi_copy_from_card(struct net_device *dev, int bufnum,
  55                                    int offset, void *buf, int count);
  56
  57 /* Handy defines for ARCnet specific stuff */
  58
  59 /* Amount of I/O memory used by the card */
  60 #define BUFFER_SIZE     (512)
  61 #define MIRROR_SIZE     (BUFFER_SIZE * 4)
  62
  63 /* We cannot probe for a RIM I card; one reason is I don't know how to reset
  64  * them.  In fact, we can't even get their node ID automatically.  So, we
  65  * need to be passed a specific shmem address, IRQ, and node ID.
  66  */
  67 static int __init arcrimi_probe(struct net_device *dev)
  68 {
  69         if (BUGLVL(D_NORMAL)) {
  70                 pr_info("%s\n", "RIM I (entirely mem-mapped) support");
  71                 pr_info("E-mail me if you actually test the RIM I driver, please!\n");
  72                 pr_info("Given: node %02Xh, shmem %lXh, irq %d\n",
  73                         dev->dev_addr[0], dev->mem_start, dev->irq);
  74         }
  75
  76         if (dev->mem_start <= 0 || dev->irq <= 0) {
  77                 if (BUGLVL(D_NORMAL))
  78                         pr_err("No autoprobe for RIM I; you must specify the shmem and irq!\n");
  79                 return -ENODEV;
  80         }
  81         if (dev->dev_addr[0] == 0) {
  82                 if (BUGLVL(D_NORMAL))
  83                         pr_err("You need to specify your card's station ID!\n");
  84                 return -ENODEV;
  85         }
  86         /* Grab the memory region at mem_start for MIRROR_SIZE bytes.
  87          * Later in arcrimi_found() the real size will be determined
  88          * and this reserve will be released and the correct size
  89          * will be taken.
  90          */
  91         if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) {
  92                 if (BUGLVL(D_NORMAL))
  93                         pr_notice("Card memory already allocated\n");
  94                 return -ENODEV;
  95         }
  96         return arcrimi_found(dev);
  97 }
  98
  99 static int check_mirror(unsigned long addr, size_t size)
 100 {
 101         void __iomem *p;
 102         int res = -1;
 103
 104         if (!request_mem_region(addr, size, "arcnet (90xx)"))
 105                 return -1;
 106
 107         p = ioremap(addr, size);
 108         if (p) {
 109                 if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue)
 110                         res = 1;
 111                 else
 112                         res = 0;
 113                 iounmap(p);
 114         }
 115
 116         release_mem_region(addr, size);
 117         return res;
 118 }
 119
 120 /* Set up the struct net_device associated with this card.
 121  * Called after probing succeeds.
 122  */
 123 static int __init arcrimi_found(struct net_device *dev)
 124 {
 125         struct arcnet_local *lp;
 126         unsigned long first_mirror, last_mirror, shmem;
 127         void __iomem *p;
 128         int mirror_size;
 129         int err;
 130
 131         p = ioremap(dev->mem_start, MIRROR_SIZE);
 132         if (!p) {
 133                 release_mem_region(dev->mem_start, MIRROR_SIZE);
 134                 arc_printk(D_NORMAL, dev, "Can't ioremap\n");
 135                 return -ENODEV;
 136         }
 137
 138         /* reserve the irq */
 139         if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (RIM I)", dev)) {
 140                 iounmap(p);
 141                 release_mem_region(dev->mem_start, MIRROR_SIZE);
 142                 arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
 143                 return -ENODEV;
 144         }
 145
 146         shmem = dev->mem_start;
 147         arcnet_writeb(TESTvalue, p, COM9026_REG_W_INTMASK);
 148         arcnet_writeb(TESTvalue, p, COM9026_REG_W_COMMAND);
 149                                         /* actually the station/node ID */
 150
 151         /* find the real shared memory start/end points, including mirrors */
 152
 153         /* guess the actual size of one "memory mirror" - the number of
 154          * bytes between copies of the shared memory.  On most cards, it's
 155          * 2k (or there are no mirrors at all) but on some, it's 4k.
 156          */
 157         mirror_size = MIRROR_SIZE;
 158         if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue &&
 159             check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
 160             check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
 161                 mirror_size = 2 * MIRROR_SIZE;
 162
 163         first_mirror = shmem - mirror_size;
 164         while (check_mirror(first_mirror, mirror_size) == 1)
 165                 first_mirror -= mirror_size;
 166         first_mirror += mirror_size;
 167
 168         last_mirror = shmem + mirror_size;
 169         while (check_mirror(last_mirror, mirror_size) == 1)
 170                 last_mirror += mirror_size;
 171         last_mirror -= mirror_size;
 172
 173         dev->mem_start = first_mirror;
 174         dev->mem_end = last_mirror + MIRROR_SIZE - 1;
 175
 176         /* initialize the rest of the device structure. */
 177
 178         lp = netdev_priv(dev);
 179         lp->card_name = "RIM I";
 180         lp->hw.command = arcrimi_command;
 181         lp->hw.status = arcrimi_status;
 182         lp->hw.intmask = arcrimi_setmask;
 183         lp->hw.reset = arcrimi_reset;
 184         lp->hw.owner = THIS_MODULE;
 185         lp->hw.copy_to_card = arcrimi_copy_to_card;
 186         lp->hw.copy_from_card = arcrimi_copy_from_card;
 187
 188         /* re-reserve the memory region - arcrimi_probe() alloced this reqion
 189          * but didn't know the real size.  Free that region and then re-get
 190          * with the correct size.  There is a VERY slim chance this could
 191          * fail.
 192          */
 193         iounmap(p);
 194         release_mem_region(shmem, MIRROR_SIZE);
 195         if (!request_mem_region(dev->mem_start,
 196                                 dev->mem_end - dev->mem_start + 1,
 197                                 "arcnet (90xx)")) {
 198                 arc_printk(D_NORMAL, dev, "Card memory already allocated\n");
 199                 goto err_free_irq;
 200         }
 201
 202         lp->mem_start = ioremap(dev->mem_start,
 203                                 dev->mem_end - dev->mem_start + 1);
 204         if (!lp->mem_start) {
 205                 arc_printk(D_NORMAL, dev, "Can't remap device memory!\n");
 206                 goto err_release_mem;
 207         }
 208
 209         /* get and check the station ID from offset 1 in shmem */
 210         dev->dev_addr[0] = arcnet_readb(lp->mem_start, COM9026_REG_R_STATION);
 211
 212         arc_printk(D_NORMAL, dev, "ARCnet RIM I: station %02Xh found at IRQ %d, ShMem %lXh (%ld*%d bytes)\n",
 213                    dev->dev_addr[0],
 214                    dev->irq, dev->mem_start,
 215                    (dev->mem_end - dev->mem_start + 1) / mirror_size,
 216                    mirror_size);
 217
 218         err = register_netdev(dev);
 219         if (err)
 220                 goto err_unmap;
 221
 222         return 0;
 223
 224 err_unmap:
 225         iounmap(lp->mem_start);
 226 err_release_mem:
 227         release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1);
 228 err_free_irq:
 229         free_irq(dev->irq, dev);
 230         return -EIO;
 231 }
 232
 233 /* Do a hardware reset on the card, and set up necessary registers.
 234  *
 235  * This should be called as little as possible, because it disrupts the
 236  * token on the network (causes a RECON) and requires a significant delay.
 237  *
 238  * However, it does make sure the card is in a defined state.
 239  */
 240 static int arcrimi_reset(struct net_device *dev, int really_reset)
 241 {
 242         struct arcnet_local *lp = netdev_priv(dev);
 243         void __iomem *ioaddr = lp->mem_start + 0x800;
 244
 245         arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
 246                    dev->name, arcnet_readb(ioaddr, COM9026_REG_R_STATUS));
 247
 248         if (really_reset) {
 249                 arcnet_writeb(TESTvalue, ioaddr, -0x800);       /* fake reset */
 250                 return 0;
 251         }
 252         /* clear flags & end reset */
 253         arcnet_writeb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
 254         arcnet_writeb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
 255
 256         /* enable extended (512-byte) packets */
 257         arcnet_writeb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
 258
 259         /* done!  return success. */
 260         return 0;
 261 }
 262
 263 static void arcrimi_setmask(struct net_device *dev, int mask)
 264 {
 265         struct arcnet_local *lp = netdev_priv(dev);
 266         void __iomem *ioaddr = lp->mem_start + 0x800;
 267
 268         arcnet_writeb(mask, ioaddr, COM9026_REG_W_INTMASK);
 269 }
 270
 271 static int arcrimi_status(struct net_device *dev)
 272 {
 273         struct arcnet_local *lp = netdev_priv(dev);
 274         void __iomem *ioaddr = lp->mem_start + 0x800;
 275
 276         return arcnet_readb(ioaddr, COM9026_REG_R_STATUS);
 277 }
 278
 279 static void arcrimi_command(struct net_device *dev, int cmd)
 280 {
 281         struct arcnet_local *lp = netdev_priv(dev);
 282         void __iomem *ioaddr = lp->mem_start + 0x800;
 283
 284         arcnet_writeb(cmd, ioaddr, COM9026_REG_W_COMMAND);
 285 }
 286
 287 static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset,
 288                                  void *buf, int count)
 289 {
 290         struct arcnet_local *lp = netdev_priv(dev);
 291         void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
 292
 293         TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count));
 294 }
 295
 296 static void arcrimi_copy_from_card(struct net_device *dev, int bufnum,
 297                                    int offset, void *buf, int count)
 298 {
 299         struct arcnet_local *lp = netdev_priv(dev);
 300         void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
 301
 302         TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
 303 }
 304
 305 static int node;
 306 static int io;                  /* use the insmod io= irq= node= options */
 307 static int irq;
 308 static char device[9];          /* use eg. device=arc1 to change name */
 309
 310 module_param(node, int, 0);
 311 module_param(io, int, 0);
 312 module_param(irq, int, 0);
 313 module_param_string(device, device, sizeof(device), 0);
 314 MODULE_LICENSE("GPL");
 315
 316 static struct net_device *my_dev;
 317
 318 static int __init arc_rimi_init(void)
 319 {
 320         struct net_device *dev;
 321
 322         dev = alloc_arcdev(device);
 323         if (!dev)
 324                 return -ENOMEM;
 325
 326         if (node && node != 0xff)
 327                 dev->dev_addr[0] = node;
 328
 329         dev->mem_start = io;
 330         dev->irq = irq;
 331         if (dev->irq == 2)
 332                 dev->irq = 9;
 333
 334         if (arcrimi_probe(dev)) {
 335                 free_netdev(dev);
 336                 return -EIO;
 337         }
 338
 339         my_dev = dev;
 340         return 0;
 341 }
 342
 343 static void __exit arc_rimi_exit(void)
 344 {
 345         struct net_device *dev = my_dev;
 346         struct arcnet_local *lp = netdev_priv(dev);
 347
 348         unregister_netdev(dev);
 349         iounmap(lp->mem_start);
 350         release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1);
 351         free_irq(dev->irq, dev);
 352         free_netdev(dev);
 353 }
 354
 355 #ifndef MODULE
 356 static int __init arcrimi_setup(char *s)
 357 {
 358         int ints[8];
 359
 360         s = get_options(s, 8, ints);
 361         if (!ints[0])
 362                 return 1;
 363         switch (ints[0]) {
 364         default:                /* ERROR */
 365                 pr_err("Too many arguments\n");
 366         case 3:         /* Node ID */
 367                 node = ints[3];
 368         case 2:         /* IRQ */
 369                 irq = ints[2];
 370         case 1:         /* IO address */
 371                 io = ints[1];
 372         }
 373         if (*s)
 374                 snprintf(device, sizeof(device), "%s", s);
 375         return 1;
 376 }
 377 __setup("arcrimi=", arcrimi_setup);
 378 #endif                          /* MODULE */
 379
 380 module_init(arc_rimi_init)
 381 module_exit(arc_rimi_exit)