?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.16.11
[linux/fpc-iii.git] / drivers / net / ethernet / atheros / atlx / atl2.c
blobdb4bcc51023adf546ed0e8a9c8d075beec048faf
1 /*
2 * Copyright(c) 2006 - 2007 Atheros Corporation. All rights reserved.
3 * Copyright(c) 2007 - 2008 Chris Snook <csnook@redhat.com>
4 *
5 * Derived from Intel e1000 driver
6 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the Free
10 * Software Foundation; either version 2 of the License, or (at your option)
11 * any later version.
12 *
13 * This program is distributed in the hope that it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * more details.
17 *
18 * You should have received a copy of the GNU General Public License along with
19 * this program; if not, write to the Free Software Foundation, Inc., 59
20 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 */
22
23 #include <linux/atomic.h>
24 #include <linux/crc32.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/etherdevice.h>
27 #include <linux/ethtool.h>
28 #include <linux/hardirq.h>
29 #include <linux/if_vlan.h>
30 #include <linux/in.h>
31 #include <linux/interrupt.h>
32 #include <linux/ip.h>
33 #include <linux/irqflags.h>
34 #include <linux/irqreturn.h>
35 #include <linux/mii.h>
36 #include <linux/net.h>
37 #include <linux/netdevice.h>
38 #include <linux/pci.h>
39 #include <linux/pci_ids.h>
40 #include <linux/pm.h>
41 #include <linux/skbuff.h>
42 #include <linux/slab.h>
43 #include <linux/spinlock.h>
44 #include <linux/string.h>
45 #include <linux/tcp.h>
46 #include <linux/timer.h>
47 #include <linux/types.h>
48 #include <linux/workqueue.h>
49
50 #include "atl2.h"
51
52 #define ATL2_DRV_VERSION "2.2.3"
53
54 static const char atl2_driver_name[] = "atl2";
55 static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver";
56 static const char atl2_copyright[] = "Copyright (c) 2007 Atheros Corporation.";
57 static const char atl2_driver_version[] = ATL2_DRV_VERSION;
58 static const struct ethtool_ops atl2_ethtool_ops;
59
60 MODULE_AUTHOR("Atheros Corporation <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com>");
61 MODULE_DESCRIPTION("Atheros Fast Ethernet Network Driver");
62 MODULE_LICENSE("GPL");
63 MODULE_VERSION(ATL2_DRV_VERSION);
64
65 /*
66 * atl2_pci_tbl - PCI Device ID Table
67 */
68 static const struct pci_device_id atl2_pci_tbl[] = {
69 {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2)},
70 /* required last entry */
71 {0,}
72 };
73 MODULE_DEVICE_TABLE(pci, atl2_pci_tbl);
74
75 static void atl2_check_options(struct atl2_adapter *adapter);
76
77 /**
78 * atl2_sw_init - Initialize general software structures (struct atl2_adapter)
79 * @adapter: board private structure to initialize
80 *
81 * atl2_sw_init initializes the Adapter private data structure.
82 * Fields are initialized based on PCI device information and
83 * OS network device settings (MTU size).
84 */
85 static int atl2_sw_init(struct atl2_adapter *adapter)
86 {
87 struct atl2_hw *hw = &adapter->hw;
88 struct pci_dev *pdev = adapter->pdev;
89
90 /* PCI config space info */
91 hw->vendor_id = pdev->vendor;
92 hw->device_id = pdev->device;
93 hw->subsystem_vendor_id = pdev->subsystem_vendor;
94 hw->subsystem_id = pdev->subsystem_device;
95 hw->revision_id = pdev->revision;
96
97 pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
98
99 adapter->wol = 0;
100 adapter->ict = 50000; /* ~100ms */
101 adapter->link_speed = SPEED_0; /* hardware init */
102 adapter->link_duplex = FULL_DUPLEX;
103
104 hw->phy_configured = false;
105 hw->preamble_len = 7;
106 hw->ipgt = 0x60;
107 hw->min_ifg = 0x50;
108 hw->ipgr1 = 0x40;
109 hw->ipgr2 = 0x60;
110 hw->retry_buf = 2;
111 hw->max_retry = 0xf;
112 hw->lcol = 0x37;
113 hw->jam_ipg = 7;
114 hw->fc_rxd_hi = 0;
115 hw->fc_rxd_lo = 0;
116 hw->max_frame_size = adapter->netdev->mtu;
117
118 spin_lock_init(&adapter->stats_lock);
119
120 set_bit(__ATL2_DOWN, &adapter->flags);
121
122 return 0;
123 }
124
125 /**
126 * atl2_set_multi - Multicast and Promiscuous mode set
127 * @netdev: network interface device structure
128 *
129 * The set_multi entry point is called whenever the multicast address
130 * list or the network interface flags are updated. This routine is
131 * responsible for configuring the hardware for proper multicast,
132 * promiscuous mode, and all-multi behavior.
133 */
134 static void atl2_set_multi(struct net_device *netdev)
135 {
136 struct atl2_adapter *adapter = netdev_priv(netdev);
137 struct atl2_hw *hw = &adapter->hw;
138 struct netdev_hw_addr *ha;
139 u32 rctl;
140 u32 hash_value;
141
142 /* Check for Promiscuous and All Multicast modes */
143 rctl = ATL2_READ_REG(hw, REG_MAC_CTRL);
144
145 if (netdev->flags & IFF_PROMISC) {
146 rctl |= MAC_CTRL_PROMIS_EN;
147 } else if (netdev->flags & IFF_ALLMULTI) {
148 rctl |= MAC_CTRL_MC_ALL_EN;
149 rctl &= ~MAC_CTRL_PROMIS_EN;
150 } else
151 rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
152
153 ATL2_WRITE_REG(hw, REG_MAC_CTRL, rctl);
154
155 /* clear the old settings from the multicast hash table */
156 ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
157 ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
158
159 /* comoute mc addresses' hash value ,and put it into hash table */
160 netdev_for_each_mc_addr(ha, netdev) {
161 hash_value = atl2_hash_mc_addr(hw, ha->addr);
162 atl2_hash_set(hw, hash_value);
163 }
164 }
165
166 static void init_ring_ptrs(struct atl2_adapter *adapter)
167 {
168 /* Read / Write Ptr Initialize: */
169 adapter->txd_write_ptr = 0;
170 atomic_set(&adapter->txd_read_ptr, 0);
171
172 adapter->rxd_read_ptr = 0;
173 adapter->rxd_write_ptr = 0;
174
175 atomic_set(&adapter->txs_write_ptr, 0);
176 adapter->txs_next_clear = 0;
177 }
178
179 /**
180 * atl2_configure - Configure Transmit&Receive Unit after Reset
181 * @adapter: board private structure
182 *
183 * Configure the Tx /Rx unit of the MAC after a reset.
184 */
185 static int atl2_configure(struct atl2_adapter *adapter)
186 {
187 struct atl2_hw *hw = &adapter->hw;
188 u32 value;
189
190 /* clear interrupt status */
191 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0xffffffff);
192
193 /* set MAC Address */
194 value = (((u32)hw->mac_addr[2]) << 24) |
195 (((u32)hw->mac_addr[3]) << 16) |
196 (((u32)hw->mac_addr[4]) << 8) |
197 (((u32)hw->mac_addr[5]));
198 ATL2_WRITE_REG(hw, REG_MAC_STA_ADDR, value);
199 value = (((u32)hw->mac_addr[0]) << 8) |
200 (((u32)hw->mac_addr[1]));
201 ATL2_WRITE_REG(hw, (REG_MAC_STA_ADDR+4), value);
202
203 /* HI base address */
204 ATL2_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI,
205 (u32)((adapter->ring_dma & 0xffffffff00000000ULL) >> 32));
206
207 /* LO base address */
208 ATL2_WRITE_REG(hw, REG_TXD_BASE_ADDR_LO,
209 (u32)(adapter->txd_dma & 0x00000000ffffffffULL));
210 ATL2_WRITE_REG(hw, REG_TXS_BASE_ADDR_LO,
211 (u32)(adapter->txs_dma & 0x00000000ffffffffULL));
212 ATL2_WRITE_REG(hw, REG_RXD_BASE_ADDR_LO,
213 (u32)(adapter->rxd_dma & 0x00000000ffffffffULL));
214
215 /* element count */
216 ATL2_WRITE_REGW(hw, REG_TXD_MEM_SIZE, (u16)(adapter->txd_ring_size/4));
217 ATL2_WRITE_REGW(hw, REG_TXS_MEM_SIZE, (u16)adapter->txs_ring_size);
218 ATL2_WRITE_REGW(hw, REG_RXD_BUF_NUM, (u16)adapter->rxd_ring_size);
219
220 /* config Internal SRAM */
221 /*
222 ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_tx_end);
223 ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_rx_end);
224 */
225
226 /* config IPG/IFG */
227 value = (((u32)hw->ipgt & MAC_IPG_IFG_IPGT_MASK) <<
228 MAC_IPG_IFG_IPGT_SHIFT) |
229 (((u32)hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) <<
230 MAC_IPG_IFG_MIFG_SHIFT) |
231 (((u32)hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) <<
232 MAC_IPG_IFG_IPGR1_SHIFT)|
233 (((u32)hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) <<
234 MAC_IPG_IFG_IPGR2_SHIFT);
235 ATL2_WRITE_REG(hw, REG_MAC_IPG_IFG, value);
236
237 /* config Half-Duplex Control */
238 value = ((u32)hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
239 (((u32)hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) <<
240 MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
241 MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
242 (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
243 (((u32)hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) <<
244 MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
245 ATL2_WRITE_REG(hw, REG_MAC_HALF_DUPLX_CTRL, value);
246
247 /* set Interrupt Moderator Timer */
248 ATL2_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, adapter->imt);
249 ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_ITIMER_EN);
250
251 /* set Interrupt Clear Timer */
252 ATL2_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, adapter->ict);
253
254 /* set MTU */
255 ATL2_WRITE_REG(hw, REG_MTU, adapter->netdev->mtu +
256 ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN);
257
258 /* 1590 */
259 ATL2_WRITE_REG(hw, REG_TX_CUT_THRESH, 0x177);
260
261 /* flow control */
262 ATL2_WRITE_REGW(hw, REG_PAUSE_ON_TH, hw->fc_rxd_hi);
263 ATL2_WRITE_REGW(hw, REG_PAUSE_OFF_TH, hw->fc_rxd_lo);
264
265 /* Init mailbox */
266 ATL2_WRITE_REGW(hw, REG_MB_TXD_WR_IDX, (u16)adapter->txd_write_ptr);
267 ATL2_WRITE_REGW(hw, REG_MB_RXD_RD_IDX, (u16)adapter->rxd_read_ptr);
268
269 /* enable DMA read/write */
270 ATL2_WRITE_REGB(hw, REG_DMAR, DMAR_EN);
271 ATL2_WRITE_REGB(hw, REG_DMAW, DMAW_EN);
272
273 value = ATL2_READ_REG(&adapter->hw, REG_ISR);
274 if ((value & ISR_PHY_LINKDOWN) != 0)
275 value = 1; /* config failed */
276 else
277 value = 0;
278
279 /* clear all interrupt status */
280 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0x3fffffff);
281 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
282 return value;
283 }
284
285 /**
286 * atl2_setup_ring_resources - allocate Tx / RX descriptor resources
287 * @adapter: board private structure
288 *
289 * Return 0 on success, negative on failure
290 */
291 static s32 atl2_setup_ring_resources(struct atl2_adapter *adapter)
292 {
293 struct pci_dev *pdev = adapter->pdev;
294 int size;
295 u8 offset = 0;
296
297 /* real ring DMA buffer */
298 adapter->ring_size = size =
299 adapter->txd_ring_size * 1 + 7 + /* dword align */
300 adapter->txs_ring_size * 4 + 7 + /* dword align */
301 adapter->rxd_ring_size * 1536 + 127; /* 128bytes align */
302
303 adapter->ring_vir_addr = pci_alloc_consistent(pdev, size,
304 &adapter->ring_dma);
305 if (!adapter->ring_vir_addr)
306 return -ENOMEM;
307 memset(adapter->ring_vir_addr, 0, adapter->ring_size);
308
309 /* Init TXD Ring */
310 adapter->txd_dma = adapter->ring_dma ;
311 offset = (adapter->txd_dma & 0x7) ? (8 - (adapter->txd_dma & 0x7)) : 0;
312 adapter->txd_dma += offset;
313 adapter->txd_ring = adapter->ring_vir_addr + offset;
314
315 /* Init TXS Ring */
316 adapter->txs_dma = adapter->txd_dma + adapter->txd_ring_size;
317 offset = (adapter->txs_dma & 0x7) ? (8 - (adapter->txs_dma & 0x7)) : 0;
318 adapter->txs_dma += offset;
319 adapter->txs_ring = (struct tx_pkt_status *)
320 (((u8 *)adapter->txd_ring) + (adapter->txd_ring_size + offset));
321
322 /* Init RXD Ring */
323 adapter->rxd_dma = adapter->txs_dma + adapter->txs_ring_size * 4;
324 offset = (adapter->rxd_dma & 127) ?
325 (128 - (adapter->rxd_dma & 127)) : 0;
326 if (offset > 7)
327 offset -= 8;
328 else
329 offset += (128 - 8);
330
331 adapter->rxd_dma += offset;
332 adapter->rxd_ring = (struct rx_desc *) (((u8 *)adapter->txs_ring) +
333 (adapter->txs_ring_size * 4 + offset));
334
335 /*
336 * Read / Write Ptr Initialize:
337 * init_ring_ptrs(adapter);
338 */
339 return 0;
340 }
341
342 /**
343 * atl2_irq_enable - Enable default interrupt generation settings
344 * @adapter: board private structure
345 */
346 static inline void atl2_irq_enable(struct atl2_adapter *adapter)
347 {
348 ATL2_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK);
349 ATL2_WRITE_FLUSH(&adapter->hw);
350 }
351
352 /**
353 * atl2_irq_disable - Mask off interrupt generation on the NIC
354 * @adapter: board private structure
355 */
356 static inline void atl2_irq_disable(struct atl2_adapter *adapter)
357 {
358 ATL2_WRITE_REG(&adapter->hw, REG_IMR, 0);
359 ATL2_WRITE_FLUSH(&adapter->hw);
360 synchronize_irq(adapter->pdev->irq);
361 }
362
363 static void __atl2_vlan_mode(netdev_features_t features, u32 *ctrl)
364 {
365 if (features & NETIF_F_HW_VLAN_CTAG_RX) {
366 /* enable VLAN tag insert/strip */
367 *ctrl |= MAC_CTRL_RMV_VLAN;
368 } else {
369 /* disable VLAN tag insert/strip */
370 *ctrl &= ~MAC_CTRL_RMV_VLAN;
371 }
372 }
373
374 static void atl2_vlan_mode(struct net_device *netdev,
375 netdev_features_t features)
376 {
377 struct atl2_adapter *adapter = netdev_priv(netdev);
378 u32 ctrl;
379
380 atl2_irq_disable(adapter);
381
382 ctrl = ATL2_READ_REG(&adapter->hw, REG_MAC_CTRL);
383 __atl2_vlan_mode(features, &ctrl);
384 ATL2_WRITE_REG(&adapter->hw, REG_MAC_CTRL, ctrl);
385
386 atl2_irq_enable(adapter);
387 }
388
389 static void atl2_restore_vlan(struct atl2_adapter *adapter)
390 {
391 atl2_vlan_mode(adapter->netdev, adapter->netdev->features);
392 }
393
394 static netdev_features_t atl2_fix_features(struct net_device *netdev,
395 netdev_features_t features)
396 {
397 /*
398 * Since there is no support for separate rx/tx vlan accel
399 * enable/disable make sure tx flag is always in same state as rx.
400 */
401 if (features & NETIF_F_HW_VLAN_CTAG_RX)
402 features |= NETIF_F_HW_VLAN_CTAG_TX;
403 else
404 features &= ~NETIF_F_HW_VLAN_CTAG_TX;
405
406 return features;
407 }
408
409 static int atl2_set_features(struct net_device *netdev,
410 netdev_features_t features)
411 {
412 netdev_features_t changed = netdev->features ^ features;
413
414 if (changed & NETIF_F_HW_VLAN_CTAG_RX)
415 atl2_vlan_mode(netdev, features);
416
417 return 0;
418 }
419
420 static void atl2_intr_rx(struct atl2_adapter *adapter)
421 {
422 struct net_device *netdev = adapter->netdev;
423 struct rx_desc *rxd;
424 struct sk_buff *skb;
425
426 do {
427 rxd = adapter->rxd_ring+adapter->rxd_write_ptr;
428 if (!rxd->status.update)
429 break; /* end of tx */
430
431 /* clear this flag at once */
432 rxd->status.update = 0;
433
434 if (rxd->status.ok && rxd->status.pkt_size >= 60) {
435 int rx_size = (int)(rxd->status.pkt_size - 4);
436 /* alloc new buffer */
437 skb = netdev_alloc_skb_ip_align(netdev, rx_size);
438 if (NULL == skb) {
439 /*
440 * Check that some rx space is free. If not,
441 * free one and mark stats->rx_dropped++.
442 */
443 netdev->stats.rx_dropped++;
444 break;
445 }
446 memcpy(skb->data, rxd->packet, rx_size);
447 skb_put(skb, rx_size);
448 skb->protocol = eth_type_trans(skb, netdev);
449 if (rxd->status.vlan) {
450 u16 vlan_tag = (rxd->status.vtag>>4) |
451 ((rxd->status.vtag&7) << 13) |
452 ((rxd->status.vtag&8) << 9);
453
454 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
455 }
456 netif_rx(skb);
457 netdev->stats.rx_bytes += rx_size;
458 netdev->stats.rx_packets++;
459 } else {
460 netdev->stats.rx_errors++;
461
462 if (rxd->status.ok && rxd->status.pkt_size <= 60)
463 netdev->stats.rx_length_errors++;
464 if (rxd->status.mcast)
465 netdev->stats.multicast++;
466 if (rxd->status.crc)
467 netdev->stats.rx_crc_errors++;
468 if (rxd->status.align)
469 netdev->stats.rx_frame_errors++;
470 }
471
472 /* advance write ptr */
473 if (++adapter->rxd_write_ptr == adapter->rxd_ring_size)
474 adapter->rxd_write_ptr = 0;
475 } while (1);
476
477 /* update mailbox? */
478 adapter->rxd_read_ptr = adapter->rxd_write_ptr;
479 ATL2_WRITE_REGW(&adapter->hw, REG_MB_RXD_RD_IDX, adapter->rxd_read_ptr);
480 }
481
482 static void atl2_intr_tx(struct atl2_adapter *adapter)
483 {
484 struct net_device *netdev = adapter->netdev;
485 u32 txd_read_ptr;
486 u32 txs_write_ptr;
487 struct tx_pkt_status *txs;
488 struct tx_pkt_header *txph;
489 int free_hole = 0;
490
491 do {
492 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
493 txs = adapter->txs_ring + txs_write_ptr;
494 if (!txs->update)
495 break; /* tx stop here */
496
497 free_hole = 1;
498 txs->update = 0;
499
500 if (++txs_write_ptr == adapter->txs_ring_size)
501 txs_write_ptr = 0;
502 atomic_set(&adapter->txs_write_ptr, (int)txs_write_ptr);
503
504 txd_read_ptr = (u32) atomic_read(&adapter->txd_read_ptr);
505 txph = (struct tx_pkt_header *)
506 (((u8 *)adapter->txd_ring) + txd_read_ptr);
507
508 if (txph->pkt_size != txs->pkt_size) {
509 struct tx_pkt_status *old_txs = txs;
510 printk(KERN_WARNING
511 "%s: txs packet size not consistent with txd"
512 " txd_:0x%08x, txs_:0x%08x!\n",
513 adapter->netdev->name,
514 *(u32 *)txph, *(u32 *)txs);
515 printk(KERN_WARNING
516 "txd read ptr: 0x%x\n",
517 txd_read_ptr);
518 txs = adapter->txs_ring + txs_write_ptr;
519 printk(KERN_WARNING
520 "txs-behind:0x%08x\n",
521 *(u32 *)txs);
522 if (txs_write_ptr < 2) {
523 txs = adapter->txs_ring +
524 (adapter->txs_ring_size +
525 txs_write_ptr - 2);
526 } else {
527 txs = adapter->txs_ring + (txs_write_ptr - 2);
528 }
529 printk(KERN_WARNING
530 "txs-before:0x%08x\n",
531 *(u32 *)txs);
532 txs = old_txs;
533 }
534
535 /* 4for TPH */
536 txd_read_ptr += (((u32)(txph->pkt_size) + 7) & ~3);
537 if (txd_read_ptr >= adapter->txd_ring_size)
538 txd_read_ptr -= adapter->txd_ring_size;
539
540 atomic_set(&adapter->txd_read_ptr, (int)txd_read_ptr);
541
542 /* tx statistics: */
543 if (txs->ok) {
544 netdev->stats.tx_bytes += txs->pkt_size;
545 netdev->stats.tx_packets++;
546 }
547 else
548 netdev->stats.tx_errors++;
549
550 if (txs->defer)
551 netdev->stats.collisions++;
552 if (txs->abort_col)
553 netdev->stats.tx_aborted_errors++;
554 if (txs->late_col)
555 netdev->stats.tx_window_errors++;
556 if (txs->underun)
557 netdev->stats.tx_fifo_errors++;
558 } while (1);
559
560 if (free_hole) {
561 if (netif_queue_stopped(adapter->netdev) &&
562 netif_carrier_ok(adapter->netdev))
563 netif_wake_queue(adapter->netdev);
564 }
565 }
566
567 static void atl2_check_for_link(struct atl2_adapter *adapter)
568 {
569 struct net_device *netdev = adapter->netdev;
570 u16 phy_data = 0;
571
572 spin_lock(&adapter->stats_lock);
573 atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
574 atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
575 spin_unlock(&adapter->stats_lock);
576
577 /* notify upper layer link down ASAP */
578 if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */
579 if (netif_carrier_ok(netdev)) { /* old link state: Up */
580 printk(KERN_INFO "%s: %s NIC Link is Down\n",
581 atl2_driver_name, netdev->name);
582 adapter->link_speed = SPEED_0;
583 netif_carrier_off(netdev);
584 netif_stop_queue(netdev);
585 }
586 }
587 schedule_work(&adapter->link_chg_task);
588 }
589
590 static inline void atl2_clear_phy_int(struct atl2_adapter *adapter)
591 {
592 u16 phy_data;
593 spin_lock(&adapter->stats_lock);
594 atl2_read_phy_reg(&adapter->hw, 19, &phy_data);
595 spin_unlock(&adapter->stats_lock);
596 }
597
598 /**
599 * atl2_intr - Interrupt Handler
600 * @irq: interrupt number
601 * @data: pointer to a network interface device structure
602 */
603 static irqreturn_t atl2_intr(int irq, void *data)
604 {
605 struct atl2_adapter *adapter = netdev_priv(data);
606 struct atl2_hw *hw = &adapter->hw;
607 u32 status;
608
609 status = ATL2_READ_REG(hw, REG_ISR);
610 if (0 == status)
611 return IRQ_NONE;
612
613 /* link event */
614 if (status & ISR_PHY)
615 atl2_clear_phy_int(adapter);
616
617 /* clear ISR status, and Enable CMB DMA/Disable Interrupt */
618 ATL2_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
619
620 /* check if PCIE PHY Link down */
621 if (status & ISR_PHY_LINKDOWN) {
622 if (netif_running(adapter->netdev)) { /* reset MAC */
623 ATL2_WRITE_REG(hw, REG_ISR, 0);
624 ATL2_WRITE_REG(hw, REG_IMR, 0);
625 ATL2_WRITE_FLUSH(hw);
626 schedule_work(&adapter->reset_task);
627 return IRQ_HANDLED;
628 }
629 }
630
631 /* check if DMA read/write error? */
632 if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
633 ATL2_WRITE_REG(hw, REG_ISR, 0);
634 ATL2_WRITE_REG(hw, REG_IMR, 0);
635 ATL2_WRITE_FLUSH(hw);
636 schedule_work(&adapter->reset_task);
637 return IRQ_HANDLED;
638 }
639
640 /* link event */
641 if (status & (ISR_PHY | ISR_MANUAL)) {
642 adapter->netdev->stats.tx_carrier_errors++;
643 atl2_check_for_link(adapter);
644 }
645
646 /* transmit event */
647 if (status & ISR_TX_EVENT)
648 atl2_intr_tx(adapter);
649
650 /* rx exception */
651 if (status & ISR_RX_EVENT)
652 atl2_intr_rx(adapter);
653
654 /* re-enable Interrupt */
655 ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
656 return IRQ_HANDLED;
657 }
658
659 static int atl2_request_irq(struct atl2_adapter *adapter)
660 {
661 struct net_device *netdev = adapter->netdev;
662 int flags, err = 0;
663
664 flags = IRQF_SHARED;
665 adapter->have_msi = true;
666 err = pci_enable_msi(adapter->pdev);
667 if (err)
668 adapter->have_msi = false;
669
670 if (adapter->have_msi)
671 flags &= ~IRQF_SHARED;
672
673 return request_irq(adapter->pdev->irq, atl2_intr, flags, netdev->name,
674 netdev);
675 }
676
677 /**
678 * atl2_free_ring_resources - Free Tx / RX descriptor Resources
679 * @adapter: board private structure
680 *
681 * Free all transmit software resources
682 */
683 static void atl2_free_ring_resources(struct atl2_adapter *adapter)
684 {
685 struct pci_dev *pdev = adapter->pdev;
686 pci_free_consistent(pdev, adapter->ring_size, adapter->ring_vir_addr,
687 adapter->ring_dma);
688 }
689
690 /**
691 * atl2_open - Called when a network interface is made active
692 * @netdev: network interface device structure
693 *
694 * Returns 0 on success, negative value on failure
695 *
696 * The open entry point is called when a network interface is made
697 * active by the system (IFF_UP). At this point all resources needed
698 * for transmit and receive operations are allocated, the interrupt
699 * handler is registered with the OS, the watchdog timer is started,
700 * and the stack is notified that the interface is ready.
701 */
702 static int atl2_open(struct net_device *netdev)
703 {
704 struct atl2_adapter *adapter = netdev_priv(netdev);
705 int err;
706 u32 val;
707
708 /* disallow open during test */
709 if (test_bit(__ATL2_TESTING, &adapter->flags))
710 return -EBUSY;
711
712 /* allocate transmit descriptors */
713 err = atl2_setup_ring_resources(adapter);
714 if (err)
715 return err;
716
717 err = atl2_init_hw(&adapter->hw);
718 if (err) {
719 err = -EIO;
720 goto err_init_hw;
721 }
722
723 /* hardware has been reset, we need to reload some things */
724 atl2_set_multi(netdev);
725 init_ring_ptrs(adapter);
726
727 atl2_restore_vlan(adapter);
728
729 if (atl2_configure(adapter)) {
730 err = -EIO;
731 goto err_config;
732 }
733
734 err = atl2_request_irq(adapter);
735 if (err)
736 goto err_req_irq;
737
738 clear_bit(__ATL2_DOWN, &adapter->flags);
739
740 mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 4*HZ));
741
742 val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
743 ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL,
744 val | MASTER_CTRL_MANUAL_INT);
745
746 atl2_irq_enable(adapter);
747
748 return 0;
749
750 err_init_hw:
751 err_req_irq:
752 err_config:
753 atl2_free_ring_resources(adapter);
754 atl2_reset_hw(&adapter->hw);
755
756 return err;
757 }
758
759 static void atl2_down(struct atl2_adapter *adapter)
760 {
761 struct net_device *netdev = adapter->netdev;
762
763 /* signal that we're down so the interrupt handler does not
764 * reschedule our watchdog timer */
765 set_bit(__ATL2_DOWN, &adapter->flags);
766
767 netif_tx_disable(netdev);
768
769 /* reset MAC to disable all RX/TX */
770 atl2_reset_hw(&adapter->hw);
771 msleep(1);
772
773 atl2_irq_disable(adapter);
774
775 del_timer_sync(&adapter->watchdog_timer);
776 del_timer_sync(&adapter->phy_config_timer);
777 clear_bit(0, &adapter->cfg_phy);
778
779 netif_carrier_off(netdev);
780 adapter->link_speed = SPEED_0;
781 adapter->link_duplex = -1;
782 }
783
784 static void atl2_free_irq(struct atl2_adapter *adapter)
785 {
786 struct net_device *netdev = adapter->netdev;
787
788 free_irq(adapter->pdev->irq, netdev);
789
790 #ifdef CONFIG_PCI_MSI
791 if (adapter->have_msi)
792 pci_disable_msi(adapter->pdev);
793 #endif
794 }
795
796 /**
797 * atl2_close - Disables a network interface
798 * @netdev: network interface device structure
799 *
800 * Returns 0, this is not allowed to fail
801 *
802 * The close entry point is called when an interface is de-activated
803 * by the OS. The hardware is still under the drivers control, but
804 * needs to be disabled. A global MAC reset is issued to stop the
805 * hardware, and all transmit and receive resources are freed.
806 */
807 static int atl2_close(struct net_device *netdev)
808 {
809 struct atl2_adapter *adapter = netdev_priv(netdev);
810
811 WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
812
813 atl2_down(adapter);
814 atl2_free_irq(adapter);
815 atl2_free_ring_resources(adapter);
816
817 return 0;
818 }
819
820 static inline int TxsFreeUnit(struct atl2_adapter *adapter)
821 {
822 u32 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
823
824 return (adapter->txs_next_clear >= txs_write_ptr) ?
825 (int) (adapter->txs_ring_size - adapter->txs_next_clear +
826 txs_write_ptr - 1) :
827 (int) (txs_write_ptr - adapter->txs_next_clear - 1);
828 }
829
830 static inline int TxdFreeBytes(struct atl2_adapter *adapter)
831 {
832 u32 txd_read_ptr = (u32)atomic_read(&adapter->txd_read_ptr);
833
834 return (adapter->txd_write_ptr >= txd_read_ptr) ?
835 (int) (adapter->txd_ring_size - adapter->txd_write_ptr +
836 txd_read_ptr - 1) :
837 (int) (txd_read_ptr - adapter->txd_write_ptr - 1);
838 }
839
840 static netdev_tx_t atl2_xmit_frame(struct sk_buff *skb,
841 struct net_device *netdev)
842 {
843 struct atl2_adapter *adapter = netdev_priv(netdev);
844 struct tx_pkt_header *txph;
845 u32 offset, copy_len;
846 int txs_unused;
847 int txbuf_unused;
848
849 if (test_bit(__ATL2_DOWN, &adapter->flags)) {
850 dev_kfree_skb_any(skb);
851 return NETDEV_TX_OK;
852 }
853
854 if (unlikely(skb->len <= 0)) {
855 dev_kfree_skb_any(skb);
856 return NETDEV_TX_OK;
857 }
858
859 txs_unused = TxsFreeUnit(adapter);
860 txbuf_unused = TxdFreeBytes(adapter);
861
862 if (skb->len + sizeof(struct tx_pkt_header) + 4 > txbuf_unused ||
863 txs_unused < 1) {
864 /* not enough resources */
865 netif_stop_queue(netdev);
866 return NETDEV_TX_BUSY;
867 }
868
869 offset = adapter->txd_write_ptr;
870
871 txph = (struct tx_pkt_header *) (((u8 *)adapter->txd_ring) + offset);
872
873 *(u32 *)txph = 0;
874 txph->pkt_size = skb->len;
875
876 offset += 4;
877 if (offset >= adapter->txd_ring_size)
878 offset -= adapter->txd_ring_size;
879 copy_len = adapter->txd_ring_size - offset;
880 if (copy_len >= skb->len) {
881 memcpy(((u8 *)adapter->txd_ring) + offset, skb->data, skb->len);
882 offset += ((u32)(skb->len + 3) & ~3);
883 } else {
884 memcpy(((u8 *)adapter->txd_ring)+offset, skb->data, copy_len);
885 memcpy((u8 *)adapter->txd_ring, skb->data+copy_len,
886 skb->len-copy_len);
887 offset = ((u32)(skb->len-copy_len + 3) & ~3);
888 }
889 #ifdef NETIF_F_HW_VLAN_CTAG_TX
890 if (skb_vlan_tag_present(skb)) {
891 u16 vlan_tag = skb_vlan_tag_get(skb);
892 vlan_tag = (vlan_tag << 4) |
893 (vlan_tag >> 13) |
894 ((vlan_tag >> 9) & 0x8);
895 txph->ins_vlan = 1;
896 txph->vlan = vlan_tag;
897 }
898 #endif
899 if (offset >= adapter->txd_ring_size)
900 offset -= adapter->txd_ring_size;
901 adapter->txd_write_ptr = offset;
902
903 /* clear txs before send */
904 adapter->txs_ring[adapter->txs_next_clear].update = 0;
905 if (++adapter->txs_next_clear == adapter->txs_ring_size)
906 adapter->txs_next_clear = 0;
907
908 ATL2_WRITE_REGW(&adapter->hw, REG_MB_TXD_WR_IDX,
909 (adapter->txd_write_ptr >> 2));
910
911 mmiowb();
912 dev_kfree_skb_any(skb);
913 return NETDEV_TX_OK;
914 }
915
916 /**
917 * atl2_change_mtu - Change the Maximum Transfer Unit
918 * @netdev: network interface device structure
919 * @new_mtu: new value for maximum frame size
920 *
921 * Returns 0 on success, negative on failure
922 */
923 static int atl2_change_mtu(struct net_device *netdev, int new_mtu)
924 {
925 struct atl2_adapter *adapter = netdev_priv(netdev);
926 struct atl2_hw *hw = &adapter->hw;
927
928 /* set MTU */
929 netdev->mtu = new_mtu;
930 hw->max_frame_size = new_mtu;
931 ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ETH_HLEN +
932 VLAN_HLEN + ETH_FCS_LEN);
933
934 return 0;
935 }
936
937 /**
938 * atl2_set_mac - Change the Ethernet Address of the NIC
939 * @netdev: network interface device structure
940 * @p: pointer to an address structure
941 *
942 * Returns 0 on success, negative on failure
943 */
944 static int atl2_set_mac(struct net_device *netdev, void *p)
945 {
946 struct atl2_adapter *adapter = netdev_priv(netdev);
947 struct sockaddr *addr = p;
948
949 if (!is_valid_ether_addr(addr->sa_data))
950 return -EADDRNOTAVAIL;
951
952 if (netif_running(netdev))
953 return -EBUSY;
954
955 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
956 memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
957
958 atl2_set_mac_addr(&adapter->hw);
959
960 return 0;
961 }
962
963 static int atl2_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
964 {
965 struct atl2_adapter *adapter = netdev_priv(netdev);
966 struct mii_ioctl_data *data = if_mii(ifr);
967 unsigned long flags;
968
969 switch (cmd) {
970 case SIOCGMIIPHY:
971 data->phy_id = 0;
972 break;
973 case SIOCGMIIREG:
974 spin_lock_irqsave(&adapter->stats_lock, flags);
975 if (atl2_read_phy_reg(&adapter->hw,
976 data->reg_num & 0x1F, &data->val_out)) {
977 spin_unlock_irqrestore(&adapter->stats_lock, flags);
978 return -EIO;
979 }
980 spin_unlock_irqrestore(&adapter->stats_lock, flags);
981 break;
982 case SIOCSMIIREG:
983 if (data->reg_num & ~(0x1F))
984 return -EFAULT;
985 spin_lock_irqsave(&adapter->stats_lock, flags);
986 if (atl2_write_phy_reg(&adapter->hw, data->reg_num,
987 data->val_in)) {
988 spin_unlock_irqrestore(&adapter->stats_lock, flags);
989 return -EIO;
990 }
991 spin_unlock_irqrestore(&adapter->stats_lock, flags);
992 break;
993 default:
994 return -EOPNOTSUPP;
995 }
996 return 0;
997 }
998
999 static int atl2_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
1000 {
1001 switch (cmd) {
1002 case SIOCGMIIPHY:
1003 case SIOCGMIIREG:
1004 case SIOCSMIIREG:
1005 return atl2_mii_ioctl(netdev, ifr, cmd);
1006 #ifdef ETHTOOL_OPS_COMPAT
1007 case SIOCETHTOOL:
1008 return ethtool_ioctl(ifr);
1009 #endif
1010 default:
1011 return -EOPNOTSUPP;
1012 }
1013 }
1014
1015 /**
1016 * atl2_tx_timeout - Respond to a Tx Hang
1017 * @netdev: network interface device structure
1018 */
1019 static void atl2_tx_timeout(struct net_device *netdev)
1020 {
1021 struct atl2_adapter *adapter = netdev_priv(netdev);
1022
1023 /* Do the reset outside of interrupt context */
1024 schedule_work(&adapter->reset_task);
1025 }
1026
1027 /**
1028 * atl2_watchdog - Timer Call-back
1029 * @data: pointer to netdev cast into an unsigned long
1030 */
1031 static void atl2_watchdog(struct timer_list *t)
1032 {
1033 struct atl2_adapter *adapter = from_timer(adapter, t, watchdog_timer);
1034
1035 if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
1036 u32 drop_rxd, drop_rxs;
1037 unsigned long flags;
1038
1039 spin_lock_irqsave(&adapter->stats_lock, flags);
1040 drop_rxd = ATL2_READ_REG(&adapter->hw, REG_STS_RXD_OV);
1041 drop_rxs = ATL2_READ_REG(&adapter->hw, REG_STS_RXS_OV);
1042 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1043
1044 adapter->netdev->stats.rx_over_errors += drop_rxd + drop_rxs;
1045
1046 /* Reset the timer */
1047 mod_timer(&adapter->watchdog_timer,
1048 round_jiffies(jiffies + 4 * HZ));
1049 }
1050 }
1051
1052 /**
1053 * atl2_phy_config - Timer Call-back
1054 * @data: pointer to netdev cast into an unsigned long
1055 */
1056 static void atl2_phy_config(struct timer_list *t)
1057 {
1058 struct atl2_adapter *adapter = from_timer(adapter, t,
1059 phy_config_timer);
1060 struct atl2_hw *hw = &adapter->hw;
1061 unsigned long flags;
1062
1063 spin_lock_irqsave(&adapter->stats_lock, flags);
1064 atl2_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
1065 atl2_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN |
1066 MII_CR_RESTART_AUTO_NEG);
1067 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1068 clear_bit(0, &adapter->cfg_phy);
1069 }
1070
1071 static int atl2_up(struct atl2_adapter *adapter)
1072 {
1073 struct net_device *netdev = adapter->netdev;
1074 int err = 0;
1075 u32 val;
1076
1077 /* hardware has been reset, we need to reload some things */
1078
1079 err = atl2_init_hw(&adapter->hw);
1080 if (err) {
1081 err = -EIO;
1082 return err;
1083 }
1084
1085 atl2_set_multi(netdev);
1086 init_ring_ptrs(adapter);
1087
1088 atl2_restore_vlan(adapter);
1089
1090 if (atl2_configure(adapter)) {
1091 err = -EIO;
1092 goto err_up;
1093 }
1094
1095 clear_bit(__ATL2_DOWN, &adapter->flags);
1096
1097 val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
1098 ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL, val |
1099 MASTER_CTRL_MANUAL_INT);
1100
1101 atl2_irq_enable(adapter);
1102
1103 err_up:
1104 return err;
1105 }
1106
1107 static void atl2_reinit_locked(struct atl2_adapter *adapter)
1108 {
1109 WARN_ON(in_interrupt());
1110 while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
1111 msleep(1);
1112 atl2_down(adapter);
1113 atl2_up(adapter);
1114 clear_bit(__ATL2_RESETTING, &adapter->flags);
1115 }
1116
1117 static void atl2_reset_task(struct work_struct *work)
1118 {
1119 struct atl2_adapter *adapter;
1120 adapter = container_of(work, struct atl2_adapter, reset_task);
1121
1122 atl2_reinit_locked(adapter);
1123 }
1124
1125 static void atl2_setup_mac_ctrl(struct atl2_adapter *adapter)
1126 {
1127 u32 value;
1128 struct atl2_hw *hw = &adapter->hw;
1129 struct net_device *netdev = adapter->netdev;
1130
1131 /* Config MAC CTRL Register */
1132 value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;
1133
1134 /* duplex */
1135 if (FULL_DUPLEX == adapter->link_duplex)
1136 value |= MAC_CTRL_DUPLX;
1137
1138 /* flow control */
1139 value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
1140
1141 /* PAD & CRC */
1142 value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
1143
1144 /* preamble length */
1145 value |= (((u32)adapter->hw.preamble_len & MAC_CTRL_PRMLEN_MASK) <<
1146 MAC_CTRL_PRMLEN_SHIFT);
1147
1148 /* vlan */
1149 __atl2_vlan_mode(netdev->features, &value);
1150
1151 /* filter mode */
1152 value |= MAC_CTRL_BC_EN;
1153 if (netdev->flags & IFF_PROMISC)
1154 value |= MAC_CTRL_PROMIS_EN;
1155 else if (netdev->flags & IFF_ALLMULTI)
1156 value |= MAC_CTRL_MC_ALL_EN;
1157
1158 /* half retry buffer */
1159 value |= (((u32)(adapter->hw.retry_buf &
1160 MAC_CTRL_HALF_LEFT_BUF_MASK)) << MAC_CTRL_HALF_LEFT_BUF_SHIFT);
1161
1162 ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
1163 }
1164
1165 static int atl2_check_link(struct atl2_adapter *adapter)
1166 {
1167 struct atl2_hw *hw = &adapter->hw;
1168 struct net_device *netdev = adapter->netdev;
1169 int ret_val;
1170 u16 speed, duplex, phy_data;
1171 int reconfig = 0;
1172
1173 /* MII_BMSR must read twise */
1174 atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
1175 atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
1176 if (!(phy_data&BMSR_LSTATUS)) { /* link down */
1177 if (netif_carrier_ok(netdev)) { /* old link state: Up */
1178 u32 value;
1179 /* disable rx */
1180 value = ATL2_READ_REG(hw, REG_MAC_CTRL);
1181 value &= ~MAC_CTRL_RX_EN;
1182 ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
1183 adapter->link_speed = SPEED_0;
1184 netif_carrier_off(netdev);
1185 netif_stop_queue(netdev);
1186 }
1187 return 0;
1188 }
1189
1190 /* Link Up */
1191 ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
1192 if (ret_val)
1193 return ret_val;
1194 switch (hw->MediaType) {
1195 case MEDIA_TYPE_100M_FULL:
1196 if (speed != SPEED_100 || duplex != FULL_DUPLEX)
1197 reconfig = 1;
1198 break;
1199 case MEDIA_TYPE_100M_HALF:
1200 if (speed != SPEED_100 || duplex != HALF_DUPLEX)
1201 reconfig = 1;
1202 break;
1203 case MEDIA_TYPE_10M_FULL:
1204 if (speed != SPEED_10 || duplex != FULL_DUPLEX)
1205 reconfig = 1;
1206 break;
1207 case MEDIA_TYPE_10M_HALF:
1208 if (speed != SPEED_10 || duplex != HALF_DUPLEX)
1209 reconfig = 1;
1210 break;
1211 }
1212 /* link result is our setting */
1213 if (reconfig == 0) {
1214 if (adapter->link_speed != speed ||
1215 adapter->link_duplex != duplex) {
1216 adapter->link_speed = speed;
1217 adapter->link_duplex = duplex;
1218 atl2_setup_mac_ctrl(adapter);
1219 printk(KERN_INFO "%s: %s NIC Link is Up<%d Mbps %s>\n",
1220 atl2_driver_name, netdev->name,
1221 adapter->link_speed,
1222 adapter->link_duplex == FULL_DUPLEX ?
1223 "Full Duplex" : "Half Duplex");
1224 }
1225
1226 if (!netif_carrier_ok(netdev)) { /* Link down -> Up */
1227 netif_carrier_on(netdev);
1228 netif_wake_queue(netdev);
1229 }
1230 return 0;
1231 }
1232
1233 /* change original link status */
1234 if (netif_carrier_ok(netdev)) {
1235 u32 value;
1236 /* disable rx */
1237 value = ATL2_READ_REG(hw, REG_MAC_CTRL);
1238 value &= ~MAC_CTRL_RX_EN;
1239 ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
1240
1241 adapter->link_speed = SPEED_0;
1242 netif_carrier_off(netdev);
1243 netif_stop_queue(netdev);
1244 }
1245
1246 /* auto-neg, insert timer to re-config phy
1247 * (if interval smaller than 5 seconds, something strange) */
1248 if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
1249 if (!test_and_set_bit(0, &adapter->cfg_phy))
1250 mod_timer(&adapter->phy_config_timer,
1251 round_jiffies(jiffies + 5 * HZ));
1252 }
1253
1254 return 0;
1255 }
1256
1257 /**
1258 * atl2_link_chg_task - deal with link change event Out of interrupt context
1259 */
1260 static void atl2_link_chg_task(struct work_struct *work)
1261 {
1262 struct atl2_adapter *adapter;
1263 unsigned long flags;
1264
1265 adapter = container_of(work, struct atl2_adapter, link_chg_task);
1266
1267 spin_lock_irqsave(&adapter->stats_lock, flags);
1268 atl2_check_link(adapter);
1269 spin_unlock_irqrestore(&adapter->stats_lock, flags);
1270 }
1271
1272 static void atl2_setup_pcicmd(struct pci_dev *pdev)
1273 {
1274 u16 cmd;
1275
1276 pci_read_config_word(pdev, PCI_COMMAND, &cmd);
1277
1278 if (cmd & PCI_COMMAND_INTX_DISABLE)
1279 cmd &= ~PCI_COMMAND_INTX_DISABLE;
1280 if (cmd & PCI_COMMAND_IO)
1281 cmd &= ~PCI_COMMAND_IO;
1282 if (0 == (cmd & PCI_COMMAND_MEMORY))
1283 cmd |= PCI_COMMAND_MEMORY;
1284 if (0 == (cmd & PCI_COMMAND_MASTER))
1285 cmd |= PCI_COMMAND_MASTER;
1286 pci_write_config_word(pdev, PCI_COMMAND, cmd);
1287
1288 /*
1289 * some motherboards BIOS(PXE/EFI) driver may set PME
1290 * while they transfer control to OS (Windows/Linux)
1291 * so we should clear this bit before NIC work normally
1292 */
1293 pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0);
1294 }
1295
1296 #ifdef CONFIG_NET_POLL_CONTROLLER
1297 static void atl2_poll_controller(struct net_device *netdev)
1298 {
1299 disable_irq(netdev->irq);
1300 atl2_intr(netdev->irq, netdev);
1301 enable_irq(netdev->irq);
1302 }
1303 #endif
1304
1305
1306 static const struct net_device_ops atl2_netdev_ops = {
1307 .ndo_open = atl2_open,
1308 .ndo_stop = atl2_close,
1309 .ndo_start_xmit = atl2_xmit_frame,
1310 .ndo_set_rx_mode = atl2_set_multi,
1311 .ndo_validate_addr = eth_validate_addr,
1312 .ndo_set_mac_address = atl2_set_mac,
1313 .ndo_change_mtu = atl2_change_mtu,
1314 .ndo_fix_features = atl2_fix_features,
1315 .ndo_set_features = atl2_set_features,
1316 .ndo_do_ioctl = atl2_ioctl,
1317 .ndo_tx_timeout = atl2_tx_timeout,
1318 #ifdef CONFIG_NET_POLL_CONTROLLER
1319 .ndo_poll_controller = atl2_poll_controller,
1320 #endif
1321 };
1322
1323 /**
1324 * atl2_probe - Device Initialization Routine
1325 * @pdev: PCI device information struct
1326 * @ent: entry in atl2_pci_tbl
1327 *
1328 * Returns 0 on success, negative on failure
1329 *
1330 * atl2_probe initializes an adapter identified by a pci_dev structure.
1331 * The OS initialization, configuring of the adapter private structure,
1332 * and a hardware reset occur.
1333 */
1334 static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1335 {
1336 struct net_device *netdev;
1337 struct atl2_adapter *adapter;
1338 static int cards_found;
1339 unsigned long mmio_start;
1340 int mmio_len;
1341 int err;
1342
1343 cards_found = 0;
1344
1345 err = pci_enable_device(pdev);
1346 if (err)
1347 return err;
1348
1349 /*
1350 * atl2 is a shared-high-32-bit device, so we're stuck with 32-bit DMA
1351 * until the kernel has the proper infrastructure to support 64-bit DMA
1352 * on these devices.
1353 */
1354 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) &&
1355 pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
1356 printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
1357 err = -EIO;
1358 goto err_dma;
1359 }
1360
1361 /* Mark all PCI regions associated with PCI device
1362 * pdev as being reserved by owner atl2_driver_name */
1363 err = pci_request_regions(pdev, atl2_driver_name);
1364 if (err)
1365 goto err_pci_reg;
1366
1367 /* Enables bus-mastering on the device and calls
1368 * pcibios_set_master to do the needed arch specific settings */
1369 pci_set_master(pdev);
1370
1371 netdev = alloc_etherdev(sizeof(struct atl2_adapter));
1372 if (!netdev) {
1373 err = -ENOMEM;
1374 goto err_alloc_etherdev;
1375 }
1376
1377 SET_NETDEV_DEV(netdev, &pdev->dev);
1378
1379 pci_set_drvdata(pdev, netdev);
1380 adapter = netdev_priv(netdev);
1381 adapter->netdev = netdev;
1382 adapter->pdev = pdev;
1383 adapter->hw.back = adapter;
1384
1385 mmio_start = pci_resource_start(pdev, 0x0);
1386 mmio_len = pci_resource_len(pdev, 0x0);
1387
1388 adapter->hw.mem_rang = (u32)mmio_len;
1389 adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
1390 if (!adapter->hw.hw_addr) {
1391 err = -EIO;
1392 goto err_ioremap;
1393 }
1394
1395 atl2_setup_pcicmd(pdev);
1396
1397 netdev->netdev_ops = &atl2_netdev_ops;
1398 netdev->ethtool_ops = &atl2_ethtool_ops;
1399 netdev->watchdog_timeo = 5 * HZ;
1400 netdev->min_mtu = 40;
1401 netdev->max_mtu = ETH_DATA_LEN + VLAN_HLEN;
1402 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
1403
1404 netdev->mem_start = mmio_start;
1405 netdev->mem_end = mmio_start + mmio_len;
1406 adapter->bd_number = cards_found;
1407 adapter->pci_using_64 = false;
1408
1409 /* setup the private structure */
1410 err = atl2_sw_init(adapter);
1411 if (err)
1412 goto err_sw_init;
1413
1414 netdev->hw_features = NETIF_F_HW_VLAN_CTAG_RX;
1415 netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX);
1416
1417 /* Init PHY as early as possible due to power saving issue */
1418 atl2_phy_init(&adapter->hw);
1419
1420 /* reset the controller to
1421 * put the device in a known good starting state */
1422
1423 if (atl2_reset_hw(&adapter->hw)) {
1424 err = -EIO;
1425 goto err_reset;
1426 }
1427
1428 /* copy the MAC address out of the EEPROM */
1429 atl2_read_mac_addr(&adapter->hw);
1430 memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
1431 if (!is_valid_ether_addr(netdev->dev_addr)) {
1432 err = -EIO;
1433 goto err_eeprom;
1434 }
1435
1436 atl2_check_options(adapter);
1437
1438 timer_setup(&adapter->watchdog_timer, atl2_watchdog, 0);
1439
1440 timer_setup(&adapter->phy_config_timer, atl2_phy_config, 0);
1441
1442 INIT_WORK(&adapter->reset_task, atl2_reset_task);
1443 INIT_WORK(&adapter->link_chg_task, atl2_link_chg_task);
1444
1445 strcpy(netdev->name, "eth%d"); /* ?? */
1446 err = register_netdev(netdev);
1447 if (err)
1448 goto err_register;
1449
1450 /* assume we have no link for now */
1451 netif_carrier_off(netdev);
1452 netif_stop_queue(netdev);
1453
1454 cards_found++;
1455
1456 return 0;
1457
1458 err_reset:
1459 err_register:
1460 err_sw_init:
1461 err_eeprom:
1462 iounmap(adapter->hw.hw_addr);
1463 err_ioremap:
1464 free_netdev(netdev);
1465 err_alloc_etherdev:
1466 pci_release_regions(pdev);
1467 err_pci_reg:
1468 err_dma:
1469 pci_disable_device(pdev);
1470 return err;
1471 }
1472
1473 /**
1474 * atl2_remove - Device Removal Routine
1475 * @pdev: PCI device information struct
1476 *
1477 * atl2_remove is called by the PCI subsystem to alert the driver
1478 * that it should release a PCI device. The could be caused by a
1479 * Hot-Plug event, or because the driver is going to be removed from
1480 * memory.
1481 */
1482 /* FIXME: write the original MAC address back in case it was changed from a
1483 * BIOS-set value, as in atl1 -- CHS */
1484 static void atl2_remove(struct pci_dev *pdev)
1485 {
1486 struct net_device *netdev = pci_get_drvdata(pdev);
1487 struct atl2_adapter *adapter = netdev_priv(netdev);
1488
1489 /* flush_scheduled work may reschedule our watchdog task, so
1490 * explicitly disable watchdog tasks from being rescheduled */
1491 set_bit(__ATL2_DOWN, &adapter->flags);
1492
1493 del_timer_sync(&adapter->watchdog_timer);
1494 del_timer_sync(&adapter->phy_config_timer);
1495 cancel_work_sync(&adapter->reset_task);
1496 cancel_work_sync(&adapter->link_chg_task);
1497
1498 unregister_netdev(netdev);
1499
1500 atl2_force_ps(&adapter->hw);
1501
1502 iounmap(adapter->hw.hw_addr);
1503 pci_release_regions(pdev);
1504
1505 free_netdev(netdev);
1506
1507 pci_disable_device(pdev);
1508 }
1509
1510 static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
1511 {
1512 struct net_device *netdev = pci_get_drvdata(pdev);
1513 struct atl2_adapter *adapter = netdev_priv(netdev);
1514 struct atl2_hw *hw = &adapter->hw;
1515 u16 speed, duplex;
1516 u32 ctrl = 0;
1517 u32 wufc = adapter->wol;
1518
1519 #ifdef CONFIG_PM
1520 int retval = 0;
1521 #endif
1522
1523 netif_device_detach(netdev);
1524
1525 if (netif_running(netdev)) {
1526 WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
1527 atl2_down(adapter);
1528 }
1529
1530 #ifdef CONFIG_PM
1531 retval = pci_save_state(pdev);
1532 if (retval)
1533 return retval;
1534 #endif
1535
1536 atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
1537 atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
1538 if (ctrl & BMSR_LSTATUS)
1539 wufc &= ~ATLX_WUFC_LNKC;
1540
1541 if (0 != (ctrl & BMSR_LSTATUS) && 0 != wufc) {
1542 u32 ret_val;
1543 /* get current link speed & duplex */
1544 ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
1545 if (ret_val) {
1546 printk(KERN_DEBUG
1547 "%s: get speed&duplex error while suspend\n",
1548 atl2_driver_name);
1549 goto wol_dis;
1550 }
1551
1552 ctrl = 0;
1553
1554 /* turn on magic packet wol */
1555 if (wufc & ATLX_WUFC_MAG)
1556 ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
1557
1558 /* ignore Link Chg event when Link is up */
1559 ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);
1560
1561 /* Config MAC CTRL Register */
1562 ctrl = MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;
1563 if (FULL_DUPLEX == adapter->link_duplex)
1564 ctrl |= MAC_CTRL_DUPLX;
1565 ctrl |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
1566 ctrl |= (((u32)adapter->hw.preamble_len &
1567 MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
1568 ctrl |= (((u32)(adapter->hw.retry_buf &
1569 MAC_CTRL_HALF_LEFT_BUF_MASK)) <<
1570 MAC_CTRL_HALF_LEFT_BUF_SHIFT);
1571 if (wufc & ATLX_WUFC_MAG) {
1572 /* magic packet maybe Broadcast&multicast&Unicast */
1573 ctrl |= MAC_CTRL_BC_EN;
1574 }
1575
1576 ATL2_WRITE_REG(hw, REG_MAC_CTRL, ctrl);
1577
1578 /* pcie patch */
1579 ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
1580 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
1581 ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
1582 ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
1583 ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
1584 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
1585
1586 pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
1587 goto suspend_exit;
1588 }
1589
1590 if (0 == (ctrl&BMSR_LSTATUS) && 0 != (wufc&ATLX_WUFC_LNKC)) {
1591 /* link is down, so only LINK CHG WOL event enable */
1592 ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
1593 ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);
1594 ATL2_WRITE_REG(hw, REG_MAC_CTRL, 0);
1595
1596 /* pcie patch */
1597 ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
1598 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
1599 ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
1600 ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
1601 ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
1602 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
1603
1604 hw->phy_configured = false; /* re-init PHY when resume */
1605
1606 pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
1607
1608 goto suspend_exit;
1609 }
1610
1611 wol_dis:
1612 /* WOL disabled */
1613 ATL2_WRITE_REG(hw, REG_WOL_CTRL, 0);
1614
1615 /* pcie patch */
1616 ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
1617 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
1618 ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
1619 ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
1620 ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
1621 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
1622
1623 atl2_force_ps(hw);
1624 hw->phy_configured = false; /* re-init PHY when resume */
1625
1626 pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
1627
1628 suspend_exit:
1629 if (netif_running(netdev))
1630 atl2_free_irq(adapter);
1631
1632 pci_disable_device(pdev);
1633
1634 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1635
1636 return 0;
1637 }
1638
1639 #ifdef CONFIG_PM
1640 static int atl2_resume(struct pci_dev *pdev)
1641 {
1642 struct net_device *netdev = pci_get_drvdata(pdev);
1643 struct atl2_adapter *adapter = netdev_priv(netdev);
1644 u32 err;
1645
1646 pci_set_power_state(pdev, PCI_D0);
1647 pci_restore_state(pdev);
1648
1649 err = pci_enable_device(pdev);
1650 if (err) {
1651 printk(KERN_ERR
1652 "atl2: Cannot enable PCI device from suspend\n");
1653 return err;
1654 }
1655
1656 pci_set_master(pdev);
1657
1658 ATL2_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */
1659
1660 pci_enable_wake(pdev, PCI_D3hot, 0);
1661 pci_enable_wake(pdev, PCI_D3cold, 0);
1662
1663 ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
1664
1665 if (netif_running(netdev)) {
1666 err = atl2_request_irq(adapter);
1667 if (err)
1668 return err;
1669 }
1670
1671 atl2_reset_hw(&adapter->hw);
1672
1673 if (netif_running(netdev))
1674 atl2_up(adapter);
1675
1676 netif_device_attach(netdev);
1677
1678 return 0;
1679 }
1680 #endif
1681
1682 static void atl2_shutdown(struct pci_dev *pdev)
1683 {
1684 atl2_suspend(pdev, PMSG_SUSPEND);
1685 }
1686
1687 static struct pci_driver atl2_driver = {
1688 .name = atl2_driver_name,
1689 .id_table = atl2_pci_tbl,
1690 .probe = atl2_probe,
1691 .remove = atl2_remove,
1692 /* Power Management Hooks */
1693 .suspend = atl2_suspend,
1694 #ifdef CONFIG_PM
1695 .resume = atl2_resume,
1696 #endif
1697 .shutdown = atl2_shutdown,
1698 };
1699
1700 /**
1701 * atl2_init_module - Driver Registration Routine
1702 *
1703 * atl2_init_module is the first routine called when the driver is
1704 * loaded. All it does is register with the PCI subsystem.
1705 */
1706 static int __init atl2_init_module(void)
1707 {
1708 printk(KERN_INFO "%s - version %s\n", atl2_driver_string,
1709 atl2_driver_version);
1710 printk(KERN_INFO "%s\n", atl2_copyright);
1711 return pci_register_driver(&atl2_driver);
1712 }
1713 module_init(atl2_init_module);
1714
1715 /**
1716 * atl2_exit_module - Driver Exit Cleanup Routine
1717 *
1718 * atl2_exit_module is called just before the driver is removed
1719 * from memory.
1720 */
1721 static void __exit atl2_exit_module(void)
1722 {
1723 pci_unregister_driver(&atl2_driver);
1724 }
1725 module_exit(atl2_exit_module);
1726
1727 static void atl2_read_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
1728 {
1729 struct atl2_adapter *adapter = hw->back;
1730 pci_read_config_word(adapter->pdev, reg, value);
1731 }
1732
1733 static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
1734 {
1735 struct atl2_adapter *adapter = hw->back;
1736 pci_write_config_word(adapter->pdev, reg, *value);
1737 }
1738
1739 static int atl2_get_link_ksettings(struct net_device *netdev,
1740 struct ethtool_link_ksettings *cmd)
1741 {
1742 struct atl2_adapter *adapter = netdev_priv(netdev);
1743 struct atl2_hw *hw = &adapter->hw;
1744 u32 supported, advertising;
1745
1746 supported = (SUPPORTED_10baseT_Half |
1747 SUPPORTED_10baseT_Full |
1748 SUPPORTED_100baseT_Half |
1749 SUPPORTED_100baseT_Full |
1750 SUPPORTED_Autoneg |
1751 SUPPORTED_TP);
1752 advertising = ADVERTISED_TP;
1753
1754 advertising |= ADVERTISED_Autoneg;
1755 advertising |= hw->autoneg_advertised;
1756
1757 cmd->base.port = PORT_TP;
1758 cmd->base.phy_address = 0;
1759
1760 if (adapter->link_speed != SPEED_0) {
1761 cmd->base.speed = adapter->link_speed;
1762 if (adapter->link_duplex == FULL_DUPLEX)
1763 cmd->base.duplex = DUPLEX_FULL;
1764 else
1765 cmd->base.duplex = DUPLEX_HALF;
1766 } else {
1767 cmd->base.speed = SPEED_UNKNOWN;
1768 cmd->base.duplex = DUPLEX_UNKNOWN;
1769 }
1770
1771 cmd->base.autoneg = AUTONEG_ENABLE;
1772
1773 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
1774 supported);
1775 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
1776 advertising);
1777
1778 return 0;
1779 }
1780
1781 static int atl2_set_link_ksettings(struct net_device *netdev,
1782 const struct ethtool_link_ksettings *cmd)
1783 {
1784 struct atl2_adapter *adapter = netdev_priv(netdev);
1785 struct atl2_hw *hw = &adapter->hw;
1786 u32 advertising;
1787
1788 ethtool_convert_link_mode_to_legacy_u32(&advertising,
1789 cmd->link_modes.advertising);
1790
1791 while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
1792 msleep(1);
1793
1794 if (cmd->base.autoneg == AUTONEG_ENABLE) {
1795 #define MY_ADV_MASK (ADVERTISE_10_HALF | \
1796 ADVERTISE_10_FULL | \
1797 ADVERTISE_100_HALF| \
1798 ADVERTISE_100_FULL)
1799
1800 if ((advertising & MY_ADV_MASK) == MY_ADV_MASK) {
1801 hw->MediaType = MEDIA_TYPE_AUTO_SENSOR;
1802 hw->autoneg_advertised = MY_ADV_MASK;
1803 } else if ((advertising & MY_ADV_MASK) == ADVERTISE_100_FULL) {
1804 hw->MediaType = MEDIA_TYPE_100M_FULL;
1805 hw->autoneg_advertised = ADVERTISE_100_FULL;
1806 } else if ((advertising & MY_ADV_MASK) == ADVERTISE_100_HALF) {
1807 hw->MediaType = MEDIA_TYPE_100M_HALF;
1808 hw->autoneg_advertised = ADVERTISE_100_HALF;
1809 } else if ((advertising & MY_ADV_MASK) == ADVERTISE_10_FULL) {
1810 hw->MediaType = MEDIA_TYPE_10M_FULL;
1811 hw->autoneg_advertised = ADVERTISE_10_FULL;
1812 } else if ((advertising & MY_ADV_MASK) == ADVERTISE_10_HALF) {
1813 hw->MediaType = MEDIA_TYPE_10M_HALF;
1814 hw->autoneg_advertised = ADVERTISE_10_HALF;
1815 } else {
1816 clear_bit(__ATL2_RESETTING, &adapter->flags);
1817 return -EINVAL;
1818 }
1819 advertising = hw->autoneg_advertised |
1820 ADVERTISED_TP | ADVERTISED_Autoneg;
1821 } else {
1822 clear_bit(__ATL2_RESETTING, &adapter->flags);
1823 return -EINVAL;
1824 }
1825
1826 /* reset the link */
1827 if (netif_running(adapter->netdev)) {
1828 atl2_down(adapter);
1829 atl2_up(adapter);
1830 } else
1831 atl2_reset_hw(&adapter->hw);
1832
1833 clear_bit(__ATL2_RESETTING, &adapter->flags);
1834 return 0;
1835 }
1836
1837 static u32 atl2_get_msglevel(struct net_device *netdev)
1838 {
1839 return 0;
1840 }
1841
1842 /*
1843 * It's sane for this to be empty, but we might want to take advantage of this.
1844 */
1845 static void atl2_set_msglevel(struct net_device *netdev, u32 data)
1846 {
1847 }
1848
1849 static int atl2_get_regs_len(struct net_device *netdev)
1850 {
1851 #define ATL2_REGS_LEN 42
1852 return sizeof(u32) * ATL2_REGS_LEN;
1853 }
1854
1855 static void atl2_get_regs(struct net_device *netdev,
1856 struct ethtool_regs *regs, void *p)
1857 {
1858 struct atl2_adapter *adapter = netdev_priv(netdev);
1859 struct atl2_hw *hw = &adapter->hw;
1860 u32 *regs_buff = p;
1861 u16 phy_data;
1862
1863 memset(p, 0, sizeof(u32) * ATL2_REGS_LEN);
1864
1865 regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
1866
1867 regs_buff[0] = ATL2_READ_REG(hw, REG_VPD_CAP);
1868 regs_buff[1] = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
1869 regs_buff[2] = ATL2_READ_REG(hw, REG_SPI_FLASH_CONFIG);
1870 regs_buff[3] = ATL2_READ_REG(hw, REG_TWSI_CTRL);
1871 regs_buff[4] = ATL2_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL);
1872 regs_buff[5] = ATL2_READ_REG(hw, REG_MASTER_CTRL);
1873 regs_buff[6] = ATL2_READ_REG(hw, REG_MANUAL_TIMER_INIT);
1874 regs_buff[7] = ATL2_READ_REG(hw, REG_IRQ_MODU_TIMER_INIT);
1875 regs_buff[8] = ATL2_READ_REG(hw, REG_PHY_ENABLE);
1876 regs_buff[9] = ATL2_READ_REG(hw, REG_CMBDISDMA_TIMER);
1877 regs_buff[10] = ATL2_READ_REG(hw, REG_IDLE_STATUS);
1878 regs_buff[11] = ATL2_READ_REG(hw, REG_MDIO_CTRL);
1879 regs_buff[12] = ATL2_READ_REG(hw, REG_SERDES_LOCK);
1880 regs_buff[13] = ATL2_READ_REG(hw, REG_MAC_CTRL);
1881 regs_buff[14] = ATL2_READ_REG(hw, REG_MAC_IPG_IFG);
1882 regs_buff[15] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
1883 regs_buff[16] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR+4);
1884 regs_buff[17] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE);
1885 regs_buff[18] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE+4);
1886 regs_buff[19] = ATL2_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL);
1887 regs_buff[20] = ATL2_READ_REG(hw, REG_MTU);
1888 regs_buff[21] = ATL2_READ_REG(hw, REG_WOL_CTRL);
1889 regs_buff[22] = ATL2_READ_REG(hw, REG_SRAM_TXRAM_END);
1890 regs_buff[23] = ATL2_READ_REG(hw, REG_DESC_BASE_ADDR_HI);
1891 regs_buff[24] = ATL2_READ_REG(hw, REG_TXD_BASE_ADDR_LO);
1892 regs_buff[25] = ATL2_READ_REG(hw, REG_TXD_MEM_SIZE);
1893 regs_buff[26] = ATL2_READ_REG(hw, REG_TXS_BASE_ADDR_LO);
1894 regs_buff[27] = ATL2_READ_REG(hw, REG_TXS_MEM_SIZE);
1895 regs_buff[28] = ATL2_READ_REG(hw, REG_RXD_BASE_ADDR_LO);
1896 regs_buff[29] = ATL2_READ_REG(hw, REG_RXD_BUF_NUM);
1897 regs_buff[30] = ATL2_READ_REG(hw, REG_DMAR);
1898 regs_buff[31] = ATL2_READ_REG(hw, REG_TX_CUT_THRESH);
1899 regs_buff[32] = ATL2_READ_REG(hw, REG_DMAW);
1900 regs_buff[33] = ATL2_READ_REG(hw, REG_PAUSE_ON_TH);
1901 regs_buff[34] = ATL2_READ_REG(hw, REG_PAUSE_OFF_TH);
1902 regs_buff[35] = ATL2_READ_REG(hw, REG_MB_TXD_WR_IDX);
1903 regs_buff[36] = ATL2_READ_REG(hw, REG_MB_RXD_RD_IDX);
1904 regs_buff[38] = ATL2_READ_REG(hw, REG_ISR);
1905 regs_buff[39] = ATL2_READ_REG(hw, REG_IMR);
1906
1907 atl2_read_phy_reg(hw, MII_BMCR, &phy_data);
1908 regs_buff[40] = (u32)phy_data;
1909 atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
1910 regs_buff[41] = (u32)phy_data;
1911 }
1912
1913 static int atl2_get_eeprom_len(struct net_device *netdev)
1914 {
1915 struct atl2_adapter *adapter = netdev_priv(netdev);
1916
1917 if (!atl2_check_eeprom_exist(&adapter->hw))
1918 return 512;
1919 else
1920 return 0;
1921 }
1922
1923 static int atl2_get_eeprom(struct net_device *netdev,
1924 struct ethtool_eeprom *eeprom, u8 *bytes)
1925 {
1926 struct atl2_adapter *adapter = netdev_priv(netdev);
1927 struct atl2_hw *hw = &adapter->hw;
1928 u32 *eeprom_buff;
1929 int first_dword, last_dword;
1930 int ret_val = 0;
1931 int i;
1932
1933 if (eeprom->len == 0)
1934 return -EINVAL;
1935
1936 if (atl2_check_eeprom_exist(hw))
1937 return -EINVAL;
1938
1939 eeprom->magic = hw->vendor_id | (hw->device_id << 16);
1940
1941 first_dword = eeprom->offset >> 2;
1942 last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
1943
1944 eeprom_buff = kmalloc(sizeof(u32) * (last_dword - first_dword + 1),
1945 GFP_KERNEL);
1946 if (!eeprom_buff)
1947 return -ENOMEM;
1948
1949 for (i = first_dword; i < last_dword; i++) {
1950 if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword]))) {
1951 ret_val = -EIO;
1952 goto free;
1953 }
1954 }
1955
1956 memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
1957 eeprom->len);
1958 free:
1959 kfree(eeprom_buff);
1960
1961 return ret_val;
1962 }
1963
1964 static int atl2_set_eeprom(struct net_device *netdev,
1965 struct ethtool_eeprom *eeprom, u8 *bytes)
1966 {
1967 struct atl2_adapter *adapter = netdev_priv(netdev);
1968 struct atl2_hw *hw = &adapter->hw;
1969 u32 *eeprom_buff;
1970 u32 *ptr;
1971 int max_len, first_dword, last_dword, ret_val = 0;
1972 int i;
1973
1974 if (eeprom->len == 0)
1975 return -EOPNOTSUPP;
1976
1977 if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
1978 return -EFAULT;
1979
1980 max_len = 512;
1981
1982 first_dword = eeprom->offset >> 2;
1983 last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
1984 eeprom_buff = kmalloc(max_len, GFP_KERNEL);
1985 if (!eeprom_buff)
1986 return -ENOMEM;
1987
1988 ptr = eeprom_buff;
1989
1990 if (eeprom->offset & 3) {
1991 /* need read/modify/write of first changed EEPROM word */
1992 /* only the second byte of the word is being modified */
1993 if (!atl2_read_eeprom(hw, first_dword*4, &(eeprom_buff[0]))) {
1994 ret_val = -EIO;
1995 goto out;
1996 }
1997 ptr++;
1998 }
1999 if (((eeprom->offset + eeprom->len) & 3)) {
2000 /*
2001 * need read/modify/write of last changed EEPROM word
2002 * only the first byte of the word is being modified
2003 */
2004 if (!atl2_read_eeprom(hw, last_dword * 4,
2005 &(eeprom_buff[last_dword - first_dword]))) {
2006 ret_val = -EIO;
2007 goto out;
2008 }
2009 }
2010
2011 /* Device's eeprom is always little-endian, word addressable */
2012 memcpy(ptr, bytes, eeprom->len);
2013
2014 for (i = 0; i < last_dword - first_dword + 1; i++) {
2015 if (!atl2_write_eeprom(hw, ((first_dword+i)*4), eeprom_buff[i])) {
2016 ret_val = -EIO;
2017 goto out;
2018 }
2019 }
2020 out:
2021 kfree(eeprom_buff);
2022 return ret_val;
2023 }
2024
2025 static void atl2_get_drvinfo(struct net_device *netdev,
2026 struct ethtool_drvinfo *drvinfo)
2027 {
2028 struct atl2_adapter *adapter = netdev_priv(netdev);
2029
2030 strlcpy(drvinfo->driver, atl2_driver_name, sizeof(drvinfo->driver));
2031 strlcpy(drvinfo->version, atl2_driver_version,
2032 sizeof(drvinfo->version));
2033 strlcpy(drvinfo->fw_version, "L2", sizeof(drvinfo->fw_version));
2034 strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
2035 sizeof(drvinfo->bus_info));
2036 }
2037
2038 static void atl2_get_wol(struct net_device *netdev,
2039 struct ethtool_wolinfo *wol)
2040 {
2041 struct atl2_adapter *adapter = netdev_priv(netdev);
2042
2043 wol->supported = WAKE_MAGIC;
2044 wol->wolopts = 0;
2045
2046 if (adapter->wol & ATLX_WUFC_EX)
2047 wol->wolopts |= WAKE_UCAST;
2048 if (adapter->wol & ATLX_WUFC_MC)
2049 wol->wolopts |= WAKE_MCAST;
2050 if (adapter->wol & ATLX_WUFC_BC)
2051 wol->wolopts |= WAKE_BCAST;
2052 if (adapter->wol & ATLX_WUFC_MAG)
2053 wol->wolopts |= WAKE_MAGIC;
2054 if (adapter->wol & ATLX_WUFC_LNKC)
2055 wol->wolopts |= WAKE_PHY;
2056 }
2057
2058 static int atl2_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
2059 {
2060 struct atl2_adapter *adapter = netdev_priv(netdev);
2061
2062 if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
2063 return -EOPNOTSUPP;
2064
2065 if (wol->wolopts & (WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
2066 return -EOPNOTSUPP;
2067
2068 /* these settings will always override what we currently have */
2069 adapter->wol = 0;
2070
2071 if (wol->wolopts & WAKE_MAGIC)
2072 adapter->wol |= ATLX_WUFC_MAG;
2073 if (wol->wolopts & WAKE_PHY)
2074 adapter->wol |= ATLX_WUFC_LNKC;
2075
2076 return 0;
2077 }
2078
2079 static int atl2_nway_reset(struct net_device *netdev)
2080 {
2081 struct atl2_adapter *adapter = netdev_priv(netdev);
2082 if (netif_running(netdev))
2083 atl2_reinit_locked(adapter);
2084 return 0;
2085 }
2086
2087 static const struct ethtool_ops atl2_ethtool_ops = {
2088 .get_drvinfo = atl2_get_drvinfo,
2089 .get_regs_len = atl2_get_regs_len,
2090 .get_regs = atl2_get_regs,
2091 .get_wol = atl2_get_wol,
2092 .set_wol = atl2_set_wol,
2093 .get_msglevel = atl2_get_msglevel,
2094 .set_msglevel = atl2_set_msglevel,
2095 .nway_reset = atl2_nway_reset,
2096 .get_link = ethtool_op_get_link,
2097 .get_eeprom_len = atl2_get_eeprom_len,
2098 .get_eeprom = atl2_get_eeprom,
2099 .set_eeprom = atl2_set_eeprom,
2100 .get_link_ksettings = atl2_get_link_ksettings,
2101 .set_link_ksettings = atl2_set_link_ksettings,
2102 };
2103
2104 #define LBYTESWAP(a) ((((a) & 0x00ff00ff) << 8) | \
2105 (((a) & 0xff00ff00) >> 8))
2106 #define LONGSWAP(a) ((LBYTESWAP(a) << 16) | (LBYTESWAP(a) >> 16))
2107 #define SHORTSWAP(a) (((a) << 8) | ((a) >> 8))
2108
2109 /*
2110 * Reset the transmit and receive units; mask and clear all interrupts.
2111 *
2112 * hw - Struct containing variables accessed by shared code
2113 * return : 0 or idle status (if error)
2114 */
2115 static s32 atl2_reset_hw(struct atl2_hw *hw)
2116 {
2117 u32 icr;
2118 u16 pci_cfg_cmd_word;
2119 int i;
2120
2121 /* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */
2122 atl2_read_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
2123 if ((pci_cfg_cmd_word &
2124 (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) !=
2125 (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) {
2126 pci_cfg_cmd_word |=
2127 (CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER);
2128 atl2_write_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
2129 }
2130
2131 /* Clear Interrupt mask to stop board from generating
2132 * interrupts & Clear any pending interrupt events
2133 */
2134 /* FIXME */
2135 /* ATL2_WRITE_REG(hw, REG_IMR, 0); */
2136 /* ATL2_WRITE_REG(hw, REG_ISR, 0xffffffff); */
2137
2138 /* Issue Soft Reset to the MAC. This will reset the chip's
2139 * transmit, receive, DMA. It will not effect
2140 * the current PCI configuration. The global reset bit is self-
2141 * clearing, and should clear within a microsecond.
2142 */
2143 ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST);
2144 wmb();
2145 msleep(1); /* delay about 1ms */
2146
2147 /* Wait at least 10ms for All module to be Idle */
2148 for (i = 0; i < 10; i++) {
2149 icr = ATL2_READ_REG(hw, REG_IDLE_STATUS);
2150 if (!icr)
2151 break;
2152 msleep(1); /* delay 1 ms */
2153 cpu_relax();
2154 }
2155
2156 if (icr)
2157 return icr;
2158
2159 return 0;
2160 }
2161
2162 #define CUSTOM_SPI_CS_SETUP 2
2163 #define CUSTOM_SPI_CLK_HI 2
2164 #define CUSTOM_SPI_CLK_LO 2
2165 #define CUSTOM_SPI_CS_HOLD 2
2166 #define CUSTOM_SPI_CS_HI 3
2167
2168 static struct atl2_spi_flash_dev flash_table[] =
2169 {
2170 /* MFR WRSR READ PROGRAM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */
2171 {"Atmel", 0x0, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62 },
2172 {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60 },
2173 {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7 },
2174 };
2175
2176 static bool atl2_spi_read(struct atl2_hw *hw, u32 addr, u32 *buf)
2177 {
2178 int i;
2179 u32 value;
2180
2181 ATL2_WRITE_REG(hw, REG_SPI_DATA, 0);
2182 ATL2_WRITE_REG(hw, REG_SPI_ADDR, addr);
2183
2184 value = SPI_FLASH_CTRL_WAIT_READY |
2185 (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
2186 SPI_FLASH_CTRL_CS_SETUP_SHIFT |
2187 (CUSTOM_SPI_CLK_HI & SPI_FLASH_CTRL_CLK_HI_MASK) <<
2188 SPI_FLASH_CTRL_CLK_HI_SHIFT |
2189 (CUSTOM_SPI_CLK_LO & SPI_FLASH_CTRL_CLK_LO_MASK) <<
2190 SPI_FLASH_CTRL_CLK_LO_SHIFT |
2191 (CUSTOM_SPI_CS_HOLD & SPI_FLASH_CTRL_CS_HOLD_MASK) <<
2192 SPI_FLASH_CTRL_CS_HOLD_SHIFT |
2193 (CUSTOM_SPI_CS_HI & SPI_FLASH_CTRL_CS_HI_MASK) <<
2194 SPI_FLASH_CTRL_CS_HI_SHIFT |
2195 (0x1 & SPI_FLASH_CTRL_INS_MASK) << SPI_FLASH_CTRL_INS_SHIFT;
2196
2197 ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
2198
2199 value |= SPI_FLASH_CTRL_START;
2200
2201 ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
2202
2203 for (i = 0; i < 10; i++) {
2204 msleep(1);
2205 value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
2206 if (!(value & SPI_FLASH_CTRL_START))
2207 break;
2208 }
2209
2210 if (value & SPI_FLASH_CTRL_START)
2211 return false;
2212
2213 *buf = ATL2_READ_REG(hw, REG_SPI_DATA);
2214
2215 return true;
2216 }
2217
2218 /*
2219 * get_permanent_address
2220 * return 0 if get valid mac address,
2221 */
2222 static int get_permanent_address(struct atl2_hw *hw)
2223 {
2224 u32 Addr[2];
2225 u32 i, Control;
2226 u16 Register;
2227 u8 EthAddr[ETH_ALEN];
2228 bool KeyValid;
2229
2230 if (is_valid_ether_addr(hw->perm_mac_addr))
2231 return 0;
2232
2233 Addr[0] = 0;
2234 Addr[1] = 0;
2235
2236 if (!atl2_check_eeprom_exist(hw)) { /* eeprom exists */
2237 Register = 0;
2238 KeyValid = false;
2239
2240 /* Read out all EEPROM content */
2241 i = 0;
2242 while (1) {
2243 if (atl2_read_eeprom(hw, i + 0x100, &Control)) {
2244 if (KeyValid) {
2245 if (Register == REG_MAC_STA_ADDR)
2246 Addr[0] = Control;
2247 else if (Register ==
2248 (REG_MAC_STA_ADDR + 4))
2249 Addr[1] = Control;
2250 KeyValid = false;
2251 } else if ((Control & 0xff) == 0x5A) {
2252 KeyValid = true;
2253 Register = (u16) (Control >> 16);
2254 } else {
2255 /* assume data end while encount an invalid KEYWORD */
2256 break;
2257 }
2258 } else {
2259 break; /* read error */
2260 }
2261 i += 4;
2262 }
2263
2264 *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
2265 *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
2266
2267 if (is_valid_ether_addr(EthAddr)) {
2268 memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN);
2269 return 0;
2270 }
2271 return 1;
2272 }
2273
2274 /* see if SPI flash exists? */
2275 Addr[0] = 0;
2276 Addr[1] = 0;
2277 Register = 0;
2278 KeyValid = false;
2279 i = 0;
2280 while (1) {
2281 if (atl2_spi_read(hw, i + 0x1f000, &Control)) {
2282 if (KeyValid) {
2283 if (Register == REG_MAC_STA_ADDR)
2284 Addr[0] = Control;
2285 else if (Register == (REG_MAC_STA_ADDR + 4))
2286 Addr[1] = Control;
2287 KeyValid = false;
2288 } else if ((Control & 0xff) == 0x5A) {
2289 KeyValid = true;
2290 Register = (u16) (Control >> 16);
2291 } else {
2292 break; /* data end */
2293 }
2294 } else {
2295 break; /* read error */
2296 }
2297 i += 4;
2298 }
2299
2300 *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
2301 *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *)&Addr[1]);
2302 if (is_valid_ether_addr(EthAddr)) {
2303 memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN);
2304 return 0;
2305 }
2306 /* maybe MAC-address is from BIOS */
2307 Addr[0] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
2308 Addr[1] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR + 4);
2309 *(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
2310 *(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
2311
2312 if (is_valid_ether_addr(EthAddr)) {
2313 memcpy(hw->perm_mac_addr, EthAddr, ETH_ALEN);
2314 return 0;
2315 }
2316
2317 return 1;
2318 }
2319
2320 /*
2321 * Reads the adapter's MAC address from the EEPROM
2322 *
2323 * hw - Struct containing variables accessed by shared code
2324 */
2325 static s32 atl2_read_mac_addr(struct atl2_hw *hw)
2326 {
2327 if (get_permanent_address(hw)) {
2328 /* for test */
2329 /* FIXME: shouldn't we use eth_random_addr() here? */
2330 hw->perm_mac_addr[0] = 0x00;
2331 hw->perm_mac_addr[1] = 0x13;
2332 hw->perm_mac_addr[2] = 0x74;
2333 hw->perm_mac_addr[3] = 0x00;
2334 hw->perm_mac_addr[4] = 0x5c;
2335 hw->perm_mac_addr[5] = 0x38;
2336 }
2337
2338 memcpy(hw->mac_addr, hw->perm_mac_addr, ETH_ALEN);
2339
2340 return 0;
2341 }
2342
2343 /*
2344 * Hashes an address to determine its location in the multicast table
2345 *
2346 * hw - Struct containing variables accessed by shared code
2347 * mc_addr - the multicast address to hash
2348 *
2349 * atl2_hash_mc_addr
2350 * purpose
2351 * set hash value for a multicast address
2352 * hash calcu processing :
2353 * 1. calcu 32bit CRC for multicast address
2354 * 2. reverse crc with MSB to LSB
2355 */
2356 static u32 atl2_hash_mc_addr(struct atl2_hw *hw, u8 *mc_addr)
2357 {
2358 u32 crc32, value;
2359 int i;
2360
2361 value = 0;
2362 crc32 = ether_crc_le(6, mc_addr);
2363
2364 for (i = 0; i < 32; i++)
2365 value |= (((crc32 >> i) & 1) << (31 - i));
2366
2367 return value;
2368 }
2369
2370 /*
2371 * Sets the bit in the multicast table corresponding to the hash value.
2372 *
2373 * hw - Struct containing variables accessed by shared code
2374 * hash_value - Multicast address hash value
2375 */
2376 static void atl2_hash_set(struct atl2_hw *hw, u32 hash_value)
2377 {
2378 u32 hash_bit, hash_reg;
2379 u32 mta;
2380
2381 /* The HASH Table is a register array of 2 32-bit registers.
2382 * It is treated like an array of 64 bits. We want to set
2383 * bit BitArray[hash_value]. So we figure out what register
2384 * the bit is in, read it, OR in the new bit, then write
2385 * back the new value. The register is determined by the
2386 * upper 7 bits of the hash value and the bit within that
2387 * register are determined by the lower 5 bits of the value.
2388 */
2389 hash_reg = (hash_value >> 31) & 0x1;
2390 hash_bit = (hash_value >> 26) & 0x1F;
2391
2392 mta = ATL2_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);
2393
2394 mta |= (1 << hash_bit);
2395
2396 ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
2397 }
2398
2399 /*
2400 * atl2_init_pcie - init PCIE module
2401 */
2402 static void atl2_init_pcie(struct atl2_hw *hw)
2403 {
2404 u32 value;
2405 value = LTSSM_TEST_MODE_DEF;
2406 ATL2_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value);
2407
2408 value = PCIE_DLL_TX_CTRL1_DEF;
2409 ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, value);
2410 }
2411
2412 static void atl2_init_flash_opcode(struct atl2_hw *hw)
2413 {
2414 if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
2415 hw->flash_vendor = 0; /* ATMEL */
2416
2417 /* Init OP table */
2418 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_PROGRAM,
2419 flash_table[hw->flash_vendor].cmdPROGRAM);
2420 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_SC_ERASE,
2421 flash_table[hw->flash_vendor].cmdSECTOR_ERASE);
2422 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_CHIP_ERASE,
2423 flash_table[hw->flash_vendor].cmdCHIP_ERASE);
2424 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDID,
2425 flash_table[hw->flash_vendor].cmdRDID);
2426 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WREN,
2427 flash_table[hw->flash_vendor].cmdWREN);
2428 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDSR,
2429 flash_table[hw->flash_vendor].cmdRDSR);
2430 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WRSR,
2431 flash_table[hw->flash_vendor].cmdWRSR);
2432 ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_READ,
2433 flash_table[hw->flash_vendor].cmdREAD);
2434 }
2435
2436 /********************************************************************
2437 * Performs basic configuration of the adapter.
2438 *
2439 * hw - Struct containing variables accessed by shared code
2440 * Assumes that the controller has previously been reset and is in a
2441 * post-reset uninitialized state. Initializes multicast table,
2442 * and Calls routines to setup link
2443 * Leaves the transmit and receive units disabled and uninitialized.
2444 ********************************************************************/
2445 static s32 atl2_init_hw(struct atl2_hw *hw)
2446 {
2447 u32 ret_val = 0;
2448
2449 atl2_init_pcie(hw);
2450
2451 /* Zero out the Multicast HASH table */
2452 /* clear the old settings from the multicast hash table */
2453 ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
2454 ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
2455
2456 atl2_init_flash_opcode(hw);
2457
2458 ret_val = atl2_phy_init(hw);
2459
2460 return ret_val;
2461 }
2462
2463 /*
2464 * Detects the current speed and duplex settings of the hardware.
2465 *
2466 * hw - Struct containing variables accessed by shared code
2467 * speed - Speed of the connection
2468 * duplex - Duplex setting of the connection
2469 */
2470 static s32 atl2_get_speed_and_duplex(struct atl2_hw *hw, u16 *speed,
2471 u16 *duplex)
2472 {
2473 s32 ret_val;
2474 u16 phy_data;
2475
2476 /* Read PHY Specific Status Register (17) */
2477 ret_val = atl2_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
2478 if (ret_val)
2479 return ret_val;
2480
2481 if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
2482 return ATLX_ERR_PHY_RES;
2483
2484 switch (phy_data & MII_ATLX_PSSR_SPEED) {
2485 case MII_ATLX_PSSR_100MBS:
2486 *speed = SPEED_100;
2487 break;
2488 case MII_ATLX_PSSR_10MBS:
2489 *speed = SPEED_10;
2490 break;
2491 default:
2492 return ATLX_ERR_PHY_SPEED;
2493 }
2494
2495 if (phy_data & MII_ATLX_PSSR_DPLX)
2496 *duplex = FULL_DUPLEX;
2497 else
2498 *duplex = HALF_DUPLEX;
2499
2500 return 0;
2501 }
2502
2503 /*
2504 * Reads the value from a PHY register
2505 * hw - Struct containing variables accessed by shared code
2506 * reg_addr - address of the PHY register to read
2507 */
2508 static s32 atl2_read_phy_reg(struct atl2_hw *hw, u16 reg_addr, u16 *phy_data)
2509 {
2510 u32 val;
2511 int i;
2512
2513 val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
2514 MDIO_START |
2515 MDIO_SUP_PREAMBLE |
2516 MDIO_RW |
2517 MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
2518 ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);
2519
2520 wmb();
2521
2522 for (i = 0; i < MDIO_WAIT_TIMES; i++) {
2523 udelay(2);
2524 val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
2525 if (!(val & (MDIO_START | MDIO_BUSY)))
2526 break;
2527 wmb();
2528 }
2529 if (!(val & (MDIO_START | MDIO_BUSY))) {
2530 *phy_data = (u16)val;
2531 return 0;
2532 }
2533
2534 return ATLX_ERR_PHY;
2535 }
2536
2537 /*
2538 * Writes a value to a PHY register
2539 * hw - Struct containing variables accessed by shared code
2540 * reg_addr - address of the PHY register to write
2541 * data - data to write to the PHY
2542 */
2543 static s32 atl2_write_phy_reg(struct atl2_hw *hw, u32 reg_addr, u16 phy_data)
2544 {
2545 int i;
2546 u32 val;
2547
2548 val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
2549 (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
2550 MDIO_SUP_PREAMBLE |
2551 MDIO_START |
2552 MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
2553 ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);
2554
2555 wmb();
2556
2557 for (i = 0; i < MDIO_WAIT_TIMES; i++) {
2558 udelay(2);
2559 val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
2560 if (!(val & (MDIO_START | MDIO_BUSY)))
2561 break;
2562
2563 wmb();
2564 }
2565
2566 if (!(val & (MDIO_START | MDIO_BUSY)))
2567 return 0;
2568
2569 return ATLX_ERR_PHY;
2570 }
2571
2572 /*
2573 * Configures PHY autoneg and flow control advertisement settings
2574 *
2575 * hw - Struct containing variables accessed by shared code
2576 */
2577 static s32 atl2_phy_setup_autoneg_adv(struct atl2_hw *hw)
2578 {
2579 s32 ret_val;
2580 s16 mii_autoneg_adv_reg;
2581
2582 /* Read the MII Auto-Neg Advertisement Register (Address 4). */
2583 mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
2584
2585 /* Need to parse autoneg_advertised and set up
2586 * the appropriate PHY registers. First we will parse for
2587 * autoneg_advertised software override. Since we can advertise
2588 * a plethora of combinations, we need to check each bit
2589 * individually.
2590 */
2591
2592 /* First we clear all the 10/100 mb speed bits in the Auto-Neg
2593 * Advertisement Register (Address 4) and the 1000 mb speed bits in
2594 * the 1000Base-T Control Register (Address 9). */
2595 mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
2596
2597 /* Need to parse MediaType and setup the
2598 * appropriate PHY registers. */
2599 switch (hw->MediaType) {
2600 case MEDIA_TYPE_AUTO_SENSOR:
2601 mii_autoneg_adv_reg |=
2602 (MII_AR_10T_HD_CAPS |
2603 MII_AR_10T_FD_CAPS |
2604 MII_AR_100TX_HD_CAPS|
2605 MII_AR_100TX_FD_CAPS);
2606 hw->autoneg_advertised =
2607 ADVERTISE_10_HALF |
2608 ADVERTISE_10_FULL |
2609 ADVERTISE_100_HALF|
2610 ADVERTISE_100_FULL;
2611 break;
2612 case MEDIA_TYPE_100M_FULL:
2613 mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
2614 hw->autoneg_advertised = ADVERTISE_100_FULL;
2615 break;
2616 case MEDIA_TYPE_100M_HALF:
2617 mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
2618 hw->autoneg_advertised = ADVERTISE_100_HALF;
2619 break;
2620 case MEDIA_TYPE_10M_FULL:
2621 mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
2622 hw->autoneg_advertised = ADVERTISE_10_FULL;
2623 break;
2624 default:
2625 mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
2626 hw->autoneg_advertised = ADVERTISE_10_HALF;
2627 break;
2628 }
2629
2630 /* flow control fixed to enable all */
2631 mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
2632
2633 hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
2634
2635 ret_val = atl2_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
2636
2637 if (ret_val)
2638 return ret_val;
2639
2640 return 0;
2641 }
2642
2643 /*
2644 * Resets the PHY and make all config validate
2645 *
2646 * hw - Struct containing variables accessed by shared code
2647 *
2648 * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
2649 */
2650 static s32 atl2_phy_commit(struct atl2_hw *hw)
2651 {
2652 s32 ret_val;
2653 u16 phy_data;
2654
2655 phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG;
2656 ret_val = atl2_write_phy_reg(hw, MII_BMCR, phy_data);
2657 if (ret_val) {
2658 u32 val;
2659 int i;
2660 /* pcie serdes link may be down ! */
2661 for (i = 0; i < 25; i++) {
2662 msleep(1);
2663 val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
2664 if (!(val & (MDIO_START | MDIO_BUSY)))
2665 break;
2666 }
2667
2668 if (0 != (val & (MDIO_START | MDIO_BUSY))) {
2669 printk(KERN_ERR "atl2: PCIe link down for at least 25ms !\n");
2670 return ret_val;
2671 }
2672 }
2673 return 0;
2674 }
2675
2676 static s32 atl2_phy_init(struct atl2_hw *hw)
2677 {
2678 s32 ret_val;
2679 u16 phy_val;
2680
2681 if (hw->phy_configured)
2682 return 0;
2683
2684 /* Enable PHY */
2685 ATL2_WRITE_REGW(hw, REG_PHY_ENABLE, 1);
2686 ATL2_WRITE_FLUSH(hw);
2687 msleep(1);
2688
2689 /* check if the PHY is in powersaving mode */
2690 atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
2691 atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);
2692
2693 /* 024E / 124E 0r 0274 / 1274 ? */
2694 if (phy_val & 0x1000) {
2695 phy_val &= ~0x1000;
2696 atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val);
2697 }
2698
2699 msleep(1);
2700
2701 /*Enable PHY LinkChange Interrupt */
2702 ret_val = atl2_write_phy_reg(hw, 18, 0xC00);
2703 if (ret_val)
2704 return ret_val;
2705
2706 /* setup AutoNeg parameters */
2707 ret_val = atl2_phy_setup_autoneg_adv(hw);
2708 if (ret_val)
2709 return ret_val;
2710
2711 /* SW.Reset & En-Auto-Neg to restart Auto-Neg */
2712 ret_val = atl2_phy_commit(hw);
2713 if (ret_val)
2714 return ret_val;
2715
2716 hw->phy_configured = true;
2717
2718 return ret_val;
2719 }
2720
2721 static void atl2_set_mac_addr(struct atl2_hw *hw)
2722 {
2723 u32 value;
2724 /* 00-0B-6A-F6-00-DC
2725 * 0: 6AF600DC 1: 000B
2726 * low dword */
2727 value = (((u32)hw->mac_addr[2]) << 24) |
2728 (((u32)hw->mac_addr[3]) << 16) |
2729 (((u32)hw->mac_addr[4]) << 8) |
2730 (((u32)hw->mac_addr[5]));
2731 ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
2732 /* hight dword */
2733 value = (((u32)hw->mac_addr[0]) << 8) |
2734 (((u32)hw->mac_addr[1]));
2735 ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
2736 }
2737
2738 /*
2739 * check_eeprom_exist
2740 * return 0 if eeprom exist
2741 */
2742 static int atl2_check_eeprom_exist(struct atl2_hw *hw)
2743 {
2744 u32 value;
2745
2746 value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
2747 if (value & SPI_FLASH_CTRL_EN_VPD) {
2748 value &= ~SPI_FLASH_CTRL_EN_VPD;
2749 ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
2750 }
2751 value = ATL2_READ_REGW(hw, REG_PCIE_CAP_LIST);
2752 return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
2753 }
2754
2755 /* FIXME: This doesn't look right. -- CHS */
2756 static bool atl2_write_eeprom(struct atl2_hw *hw, u32 offset, u32 value)
2757 {
2758 return true;
2759 }
2760
2761 static bool atl2_read_eeprom(struct atl2_hw *hw, u32 Offset, u32 *pValue)
2762 {
2763 int i;
2764 u32 Control;
2765
2766 if (Offset & 0x3)
2767 return false; /* address do not align */
2768
2769 ATL2_WRITE_REG(hw, REG_VPD_DATA, 0);
2770 Control = (Offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
2771 ATL2_WRITE_REG(hw, REG_VPD_CAP, Control);
2772
2773 for (i = 0; i < 10; i++) {
2774 msleep(2);
2775 Control = ATL2_READ_REG(hw, REG_VPD_CAP);
2776 if (Control & VPD_CAP_VPD_FLAG)
2777 break;
2778 }
2779
2780 if (Control & VPD_CAP_VPD_FLAG) {
2781 *pValue = ATL2_READ_REG(hw, REG_VPD_DATA);
2782 return true;
2783 }
2784 return false; /* timeout */
2785 }
2786
2787 static void atl2_force_ps(struct atl2_hw *hw)
2788 {
2789 u16 phy_val;
2790
2791 atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
2792 atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);
2793 atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val | 0x1000);
2794
2795 atl2_write_phy_reg(hw, MII_DBG_ADDR, 2);
2796 atl2_write_phy_reg(hw, MII_DBG_DATA, 0x3000);
2797 atl2_write_phy_reg(hw, MII_DBG_ADDR, 3);
2798 atl2_write_phy_reg(hw, MII_DBG_DATA, 0);
2799 }
2800
2801 /* This is the only thing that needs to be changed to adjust the
2802 * maximum number of ports that the driver can manage.
2803 */
2804 #define ATL2_MAX_NIC 4
2805
2806 #define OPTION_UNSET -1
2807 #define OPTION_DISABLED 0
2808 #define OPTION_ENABLED 1
2809
2810 /* All parameters are treated the same, as an integer array of values.
2811 * This macro just reduces the need to repeat the same declaration code
2812 * over and over (plus this helps to avoid typo bugs).
2813 */
2814 #define ATL2_PARAM_INIT {[0 ... ATL2_MAX_NIC] = OPTION_UNSET}
2815 #ifndef module_param_array
2816 /* Module Parameters are always initialized to -1, so that the driver
2817 * can tell the difference between no user specified value or the
2818 * user asking for the default value.
2819 * The true default values are loaded in when atl2_check_options is called.
2820 *
2821 * This is a GCC extension to ANSI C.
2822 * See the item "Labeled Elements in Initializers" in the section
2823 * "Extensions to the C Language Family" of the GCC documentation.
2824 */
2825
2826 #define ATL2_PARAM(X, desc) \
2827 static const int X[ATL2_MAX_NIC + 1] = ATL2_PARAM_INIT; \
2828 MODULE_PARM(X, "1-" __MODULE_STRING(ATL2_MAX_NIC) "i"); \
2829 MODULE_PARM_DESC(X, desc);
2830 #else
2831 #define ATL2_PARAM(X, desc) \
2832 static int X[ATL2_MAX_NIC+1] = ATL2_PARAM_INIT; \
2833 static unsigned int num_##X; \
2834 module_param_array_named(X, X, int, &num_##X, 0); \
2835 MODULE_PARM_DESC(X, desc);
2836 #endif
2837
2838 /*
2839 * Transmit Memory Size
2840 * Valid Range: 64-2048
2841 * Default Value: 128
2842 */
2843 #define ATL2_MIN_TX_MEMSIZE 4 /* 4KB */
2844 #define ATL2_MAX_TX_MEMSIZE 64 /* 64KB */
2845 #define ATL2_DEFAULT_TX_MEMSIZE 8 /* 8KB */
2846 ATL2_PARAM(TxMemSize, "Bytes of Transmit Memory");
2847
2848 /*
2849 * Receive Memory Block Count
2850 * Valid Range: 16-512
2851 * Default Value: 128
2852 */
2853 #define ATL2_MIN_RXD_COUNT 16
2854 #define ATL2_MAX_RXD_COUNT 512
2855 #define ATL2_DEFAULT_RXD_COUNT 64
2856 ATL2_PARAM(RxMemBlock, "Number of receive memory block");
2857
2858 /*
2859 * User Specified MediaType Override
2860 *
2861 * Valid Range: 0-5
2862 * - 0 - auto-negotiate at all supported speeds
2863 * - 1 - only link at 1000Mbps Full Duplex
2864 * - 2 - only link at 100Mbps Full Duplex
2865 * - 3 - only link at 100Mbps Half Duplex
2866 * - 4 - only link at 10Mbps Full Duplex
2867 * - 5 - only link at 10Mbps Half Duplex
2868 * Default Value: 0
2869 */
2870 ATL2_PARAM(MediaType, "MediaType Select");
2871
2872 /*
2873 * Interrupt Moderate Timer in units of 2048 ns (~2 us)
2874 * Valid Range: 10-65535
2875 * Default Value: 45000(90ms)
2876 */
2877 #define INT_MOD_DEFAULT_CNT 100 /* 200us */
2878 #define INT_MOD_MAX_CNT 65000
2879 #define INT_MOD_MIN_CNT 50
2880 ATL2_PARAM(IntModTimer, "Interrupt Moderator Timer");
2881
2882 /*
2883 * FlashVendor
2884 * Valid Range: 0-2
2885 * 0 - Atmel
2886 * 1 - SST
2887 * 2 - ST
2888 */
2889 ATL2_PARAM(FlashVendor, "SPI Flash Vendor");
2890
2891 #define AUTONEG_ADV_DEFAULT 0x2F
2892 #define AUTONEG_ADV_MASK 0x2F
2893 #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
2894
2895 #define FLASH_VENDOR_DEFAULT 0
2896 #define FLASH_VENDOR_MIN 0
2897 #define FLASH_VENDOR_MAX 2
2898
2899 struct atl2_option {
2900 enum { enable_option, range_option, list_option } type;
2901 char *name;
2902 char *err;
2903 int def;
2904 union {
2905 struct { /* range_option info */
2906 int min;
2907 int max;
2908 } r;
2909 struct { /* list_option info */
2910 int nr;
2911 struct atl2_opt_list { int i; char *str; } *p;
2912 } l;
2913 } arg;
2914 };
2915
2916 static int atl2_validate_option(int *value, struct atl2_option *opt)
2917 {
2918 int i;
2919 struct atl2_opt_list *ent;
2920
2921 if (*value == OPTION_UNSET) {
2922 *value = opt->def;
2923 return 0;
2924 }
2925
2926 switch (opt->type) {
2927 case enable_option:
2928 switch (*value) {
2929 case OPTION_ENABLED:
2930 printk(KERN_INFO "%s Enabled\n", opt->name);
2931 return 0;
2932 case OPTION_DISABLED:
2933 printk(KERN_INFO "%s Disabled\n", opt->name);
2934 return 0;
2935 }
2936 break;
2937 case range_option:
2938 if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
2939 printk(KERN_INFO "%s set to %i\n", opt->name, *value);
2940 return 0;
2941 }
2942 break;
2943 case list_option:
2944 for (i = 0; i < opt->arg.l.nr; i++) {
2945 ent = &opt->arg.l.p[i];
2946 if (*value == ent->i) {
2947 if (ent->str[0] != '\0')
2948 printk(KERN_INFO "%s\n", ent->str);
2949 return 0;
2950 }
2951 }
2952 break;
2953 default:
2954 BUG();
2955 }
2956
2957 printk(KERN_INFO "Invalid %s specified (%i) %s\n",
2958 opt->name, *value, opt->err);
2959 *value = opt->def;
2960 return -1;
2961 }
2962
2963 /**
2964 * atl2_check_options - Range Checking for Command Line Parameters
2965 * @adapter: board private structure
2966 *
2967 * This routine checks all command line parameters for valid user
2968 * input. If an invalid value is given, or if no user specified
2969 * value exists, a default value is used. The final value is stored
2970 * in a variable in the adapter structure.
2971 */
2972 static void atl2_check_options(struct atl2_adapter *adapter)
2973 {
2974 int val;
2975 struct atl2_option opt;
2976 int bd = adapter->bd_number;
2977 if (bd >= ATL2_MAX_NIC) {
2978 printk(KERN_NOTICE "Warning: no configuration for board #%i\n",
2979 bd);
2980 printk(KERN_NOTICE "Using defaults for all values\n");
2981 #ifndef module_param_array
2982 bd = ATL2_MAX_NIC;
2983 #endif
2984 }
2985
2986 /* Bytes of Transmit Memory */
2987 opt.type = range_option;
2988 opt.name = "Bytes of Transmit Memory";
2989 opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_TX_MEMSIZE);
2990 opt.def = ATL2_DEFAULT_TX_MEMSIZE;
2991 opt.arg.r.min = ATL2_MIN_TX_MEMSIZE;
2992 opt.arg.r.max = ATL2_MAX_TX_MEMSIZE;
2993 #ifdef module_param_array
2994 if (num_TxMemSize > bd) {
2995 #endif
2996 val = TxMemSize[bd];
2997 atl2_validate_option(&val, &opt);
2998 adapter->txd_ring_size = ((u32) val) * 1024;
2999 #ifdef module_param_array
3000 } else
3001 adapter->txd_ring_size = ((u32)opt.def) * 1024;
3002 #endif
3003 /* txs ring size: */
3004 adapter->txs_ring_size = adapter->txd_ring_size / 128;
3005 if (adapter->txs_ring_size > 160)
3006 adapter->txs_ring_size = 160;
3007
3008 /* Receive Memory Block Count */
3009 opt.type = range_option;
3010 opt.name = "Number of receive memory block";
3011 opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_RXD_COUNT);
3012 opt.def = ATL2_DEFAULT_RXD_COUNT;
3013 opt.arg.r.min = ATL2_MIN_RXD_COUNT;
3014 opt.arg.r.max = ATL2_MAX_RXD_COUNT;
3015 #ifdef module_param_array
3016 if (num_RxMemBlock > bd) {
3017 #endif
3018 val = RxMemBlock[bd];
3019 atl2_validate_option(&val, &opt);
3020 adapter->rxd_ring_size = (u32)val;
3021 /* FIXME */
3022 /* ((u16)val)&~1; */ /* even number */
3023 #ifdef module_param_array
3024 } else
3025 adapter->rxd_ring_size = (u32)opt.def;
3026 #endif
3027 /* init RXD Flow control value */
3028 adapter->hw.fc_rxd_hi = (adapter->rxd_ring_size / 8) * 7;
3029 adapter->hw.fc_rxd_lo = (ATL2_MIN_RXD_COUNT / 8) >
3030 (adapter->rxd_ring_size / 12) ? (ATL2_MIN_RXD_COUNT / 8) :
3031 (adapter->rxd_ring_size / 12);
3032
3033 /* Interrupt Moderate Timer */
3034 opt.type = range_option;
3035 opt.name = "Interrupt Moderate Timer";
3036 opt.err = "using default of " __MODULE_STRING(INT_MOD_DEFAULT_CNT);
3037 opt.def = INT_MOD_DEFAULT_CNT;
3038 opt.arg.r.min = INT_MOD_MIN_CNT;
3039 opt.arg.r.max = INT_MOD_MAX_CNT;
3040 #ifdef module_param_array
3041 if (num_IntModTimer > bd) {
3042 #endif
3043 val = IntModTimer[bd];
3044 atl2_validate_option(&val, &opt);
3045 adapter->imt = (u16) val;
3046 #ifdef module_param_array
3047 } else
3048 adapter->imt = (u16)(opt.def);
3049 #endif
3050 /* Flash Vendor */
3051 opt.type = range_option;
3052 opt.name = "SPI Flash Vendor";
3053 opt.err = "using default of " __MODULE_STRING(FLASH_VENDOR_DEFAULT);
3054 opt.def = FLASH_VENDOR_DEFAULT;
3055 opt.arg.r.min = FLASH_VENDOR_MIN;
3056 opt.arg.r.max = FLASH_VENDOR_MAX;
3057 #ifdef module_param_array
3058 if (num_FlashVendor > bd) {
3059 #endif
3060 val = FlashVendor[bd];
3061 atl2_validate_option(&val, &opt);
3062 adapter->hw.flash_vendor = (u8) val;
3063 #ifdef module_param_array
3064 } else
3065 adapter->hw.flash_vendor = (u8)(opt.def);
3066 #endif
3067 /* MediaType */
3068 opt.type = range_option;
3069 opt.name = "Speed/Duplex Selection";
3070 opt.err = "using default of " __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR);
3071 opt.def = MEDIA_TYPE_AUTO_SENSOR;
3072 opt.arg.r.min = MEDIA_TYPE_AUTO_SENSOR;
3073 opt.arg.r.max = MEDIA_TYPE_10M_HALF;
3074 #ifdef module_param_array
3075 if (num_MediaType > bd) {
3076 #endif
3077 val = MediaType[bd];
3078 atl2_validate_option(&val, &opt);
3079 adapter->hw.MediaType = (u16) val;
3080 #ifdef module_param_array
3081 } else
3082 adapter->hw.MediaType = (u16)(opt.def);
3083 #endif
3084 }
Linux with added FPC-III support