?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.16.11
[linux/fpc-iii.git] / drivers / net / wan / pc300too.c
blobb9b934b7713c94e49c384acc95cc8cf4bf98d739
1 /*
2 * Cyclades PC300 synchronous serial card driver for Linux
3 *
4 * Copyright (C) 2000-2008 Krzysztof Halasa <khc@pm.waw.pl>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of version 2 of the GNU General Public License
8 * as published by the Free Software Foundation.
9 *
10 * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>.
11 *
12 * Sources of information:
13 * Hitachi HD64572 SCA-II User's Manual
14 * Original Cyclades PC300 Linux driver
15 *
16 * This driver currently supports only PC300/RSV (V.24/V.35) and
17 * PC300/X21 cards.
18 */
19
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21
22 #include <linux/module.h>
23 #include <linux/kernel.h>
24 #include <linux/slab.h>
25 #include <linux/sched.h>
26 #include <linux/types.h>
27 #include <linux/fcntl.h>
28 #include <linux/in.h>
29 #include <linux/string.h>
30 #include <linux/errno.h>
31 #include <linux/init.h>
32 #include <linux/ioport.h>
33 #include <linux/moduleparam.h>
34 #include <linux/netdevice.h>
35 #include <linux/hdlc.h>
36 #include <linux/pci.h>
37 #include <linux/delay.h>
38 #include <asm/io.h>
39
40 #include "hd64572.h"
41
42 #undef DEBUG_PKT
43 #define DEBUG_RINGS
44
45 #define PC300_PLX_SIZE 0x80 /* PLX control window size (128 B) */
46 #define PC300_SCA_SIZE 0x400 /* SCA window size (1 KB) */
47 #define MAX_TX_BUFFERS 10
48
49 static int pci_clock_freq = 33000000;
50 static int use_crystal_clock = 0;
51 static unsigned int CLOCK_BASE;
52
53 /* Masks to access the init_ctrl PLX register */
54 #define PC300_CLKSEL_MASK (0x00000004UL)
55 #define PC300_CHMEDIA_MASK(port) (0x00000020UL << ((port) * 3))
56 #define PC300_CTYPE_MASK (0x00000800UL)
57
58
59 enum { PC300_RSV = 1, PC300_X21, PC300_TE }; /* card types */
60
61 /*
62 * PLX PCI9050-1 local configuration and shared runtime registers.
63 * This structure can be used to access 9050 registers (memory mapped).
64 */
65 typedef struct {
66 u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */
67 u32 loc_rom_range; /* 10h : Local ROM Range */
68 u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */
69 u32 loc_rom_base; /* 24h : Local ROM Base */
70 u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */
71 u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */
72 u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
73 u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
74 u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
75 }plx9050;
76
77
78
79 typedef struct port_s {
80 struct napi_struct napi;
81 struct net_device *netdev;
82 struct card_s *card;
83 spinlock_t lock; /* TX lock */
84 sync_serial_settings settings;
85 int rxpart; /* partial frame received, next frame invalid*/
86 unsigned short encoding;
87 unsigned short parity;
88 unsigned int iface;
89 u16 rxin; /* rx ring buffer 'in' pointer */
90 u16 txin; /* tx ring buffer 'in' and 'last' pointers */
91 u16 txlast;
92 u8 rxs, txs, tmc; /* SCA registers */
93 u8 chan; /* physical port # - 0 or 1 */
94 }port_t;
95
96
97
98 typedef struct card_s {
99 int type; /* RSV, X21, etc. */
100 int n_ports; /* 1 or 2 ports */
101 u8 __iomem *rambase; /* buffer memory base (virtual) */
102 u8 __iomem *scabase; /* SCA memory base (virtual) */
103 plx9050 __iomem *plxbase; /* PLX registers memory base (virtual) */
104 u32 init_ctrl_value; /* Saved value - 9050 bug workaround */
105 u16 rx_ring_buffers; /* number of buffers in a ring */
106 u16 tx_ring_buffers;
107 u16 buff_offset; /* offset of first buffer of first channel */
108 u8 irq; /* interrupt request level */
109
110 port_t ports[2];
111 }card_t;
112
113
114 #define get_port(card, port) ((port) < (card)->n_ports ? \
115 (&(card)->ports[port]) : (NULL))
116
117 #include "hd64572.c"
118
119
120 static void pc300_set_iface(port_t *port)
121 {
122 card_t *card = port->card;
123 u32 __iomem * init_ctrl = &card->plxbase->init_ctrl;
124 u16 msci = get_msci(port);
125 u8 rxs = port->rxs & CLK_BRG_MASK;
126 u8 txs = port->txs & CLK_BRG_MASK;
127
128 sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
129 port->card);
130 switch(port->settings.clock_type) {
131 case CLOCK_INT:
132 rxs |= CLK_BRG; /* BRG output */
133 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
134 break;
135
136 case CLOCK_TXINT:
137 rxs |= CLK_LINE; /* RXC input */
138 txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
139 break;
140
141 case CLOCK_TXFROMRX:
142 rxs |= CLK_LINE; /* RXC input */
143 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
144 break;
145
146 default: /* EXTernal clock */
147 rxs |= CLK_LINE; /* RXC input */
148 txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
149 break;
150 }
151
152 port->rxs = rxs;
153 port->txs = txs;
154 sca_out(rxs, msci + RXS, card);
155 sca_out(txs, msci + TXS, card);
156 sca_set_port(port);
157
158 if (port->card->type == PC300_RSV) {
159 if (port->iface == IF_IFACE_V35)
160 writel(card->init_ctrl_value |
161 PC300_CHMEDIA_MASK(port->chan), init_ctrl);
162 else
163 writel(card->init_ctrl_value &
164 ~PC300_CHMEDIA_MASK(port->chan), init_ctrl);
165 }
166 }
167
168
169
170 static int pc300_open(struct net_device *dev)
171 {
172 port_t *port = dev_to_port(dev);
173
174 int result = hdlc_open(dev);
175 if (result)
176 return result;
177
178 sca_open(dev);
179 pc300_set_iface(port);
180 return 0;
181 }
182
183
184
185 static int pc300_close(struct net_device *dev)
186 {
187 sca_close(dev);
188 hdlc_close(dev);
189 return 0;
190 }
191
192
193
194 static int pc300_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
195 {
196 const size_t size = sizeof(sync_serial_settings);
197 sync_serial_settings new_line;
198 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
199 int new_type;
200 port_t *port = dev_to_port(dev);
201
202 #ifdef DEBUG_RINGS
203 if (cmd == SIOCDEVPRIVATE) {
204 sca_dump_rings(dev);
205 return 0;
206 }
207 #endif
208 if (cmd != SIOCWANDEV)
209 return hdlc_ioctl(dev, ifr, cmd);
210
211 if (ifr->ifr_settings.type == IF_GET_IFACE) {
212 ifr->ifr_settings.type = port->iface;
213 if (ifr->ifr_settings.size < size) {
214 ifr->ifr_settings.size = size; /* data size wanted */
215 return -ENOBUFS;
216 }
217 if (copy_to_user(line, &port->settings, size))
218 return -EFAULT;
219 return 0;
220
221 }
222
223 if (port->card->type == PC300_X21 &&
224 (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
225 ifr->ifr_settings.type == IF_IFACE_X21))
226 new_type = IF_IFACE_X21;
227
228 else if (port->card->type == PC300_RSV &&
229 (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
230 ifr->ifr_settings.type == IF_IFACE_V35))
231 new_type = IF_IFACE_V35;
232
233 else if (port->card->type == PC300_RSV &&
234 ifr->ifr_settings.type == IF_IFACE_V24)
235 new_type = IF_IFACE_V24;
236
237 else
238 return hdlc_ioctl(dev, ifr, cmd);
239
240 if (!capable(CAP_NET_ADMIN))
241 return -EPERM;
242
243 if (copy_from_user(&new_line, line, size))
244 return -EFAULT;
245
246 if (new_line.clock_type != CLOCK_EXT &&
247 new_line.clock_type != CLOCK_TXFROMRX &&
248 new_line.clock_type != CLOCK_INT &&
249 new_line.clock_type != CLOCK_TXINT)
250 return -EINVAL; /* No such clock setting */
251
252 if (new_line.loopback != 0 && new_line.loopback != 1)
253 return -EINVAL;
254
255 memcpy(&port->settings, &new_line, size); /* Update settings */
256 port->iface = new_type;
257 pc300_set_iface(port);
258 return 0;
259 }
260
261
262
263 static void pc300_pci_remove_one(struct pci_dev *pdev)
264 {
265 int i;
266 card_t *card = pci_get_drvdata(pdev);
267
268 for (i = 0; i < 2; i++)
269 if (card->ports[i].card)
270 unregister_hdlc_device(card->ports[i].netdev);
271
272 if (card->irq)
273 free_irq(card->irq, card);
274
275 if (card->rambase)
276 iounmap(card->rambase);
277 if (card->scabase)
278 iounmap(card->scabase);
279 if (card->plxbase)
280 iounmap(card->plxbase);
281
282 pci_release_regions(pdev);
283 pci_disable_device(pdev);
284 if (card->ports[0].netdev)
285 free_netdev(card->ports[0].netdev);
286 if (card->ports[1].netdev)
287 free_netdev(card->ports[1].netdev);
288 kfree(card);
289 }
290
291 static const struct net_device_ops pc300_ops = {
292 .ndo_open = pc300_open,
293 .ndo_stop = pc300_close,
294 .ndo_start_xmit = hdlc_start_xmit,
295 .ndo_do_ioctl = pc300_ioctl,
296 };
297
298 static int pc300_pci_init_one(struct pci_dev *pdev,
299 const struct pci_device_id *ent)
300 {
301 card_t *card;
302 u32 __iomem *p;
303 int i;
304 u32 ramsize;
305 u32 ramphys; /* buffer memory base */
306 u32 scaphys; /* SCA memory base */
307 u32 plxphys; /* PLX registers memory base */
308
309 i = pci_enable_device(pdev);
310 if (i)
311 return i;
312
313 i = pci_request_regions(pdev, "PC300");
314 if (i) {
315 pci_disable_device(pdev);
316 return i;
317 }
318
319 card = kzalloc(sizeof(card_t), GFP_KERNEL);
320 if (card == NULL) {
321 pci_release_regions(pdev);
322 pci_disable_device(pdev);
323 return -ENOBUFS;
324 }
325 pci_set_drvdata(pdev, card);
326
327 if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
328 pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
329 pci_resource_len(pdev, 3) < 16384) {
330 pr_err("invalid card EEPROM parameters\n");
331 pc300_pci_remove_one(pdev);
332 return -EFAULT;
333 }
334
335 plxphys = pci_resource_start(pdev, 0) & PCI_BASE_ADDRESS_MEM_MASK;
336 card->plxbase = ioremap(plxphys, PC300_PLX_SIZE);
337
338 scaphys = pci_resource_start(pdev, 2) & PCI_BASE_ADDRESS_MEM_MASK;
339 card->scabase = ioremap(scaphys, PC300_SCA_SIZE);
340
341 ramphys = pci_resource_start(pdev, 3) & PCI_BASE_ADDRESS_MEM_MASK;
342 card->rambase = pci_ioremap_bar(pdev, 3);
343
344 if (card->plxbase == NULL ||
345 card->scabase == NULL ||
346 card->rambase == NULL) {
347 pr_err("ioremap() failed\n");
348 pc300_pci_remove_one(pdev);
349 return -ENOMEM;
350 }
351
352 /* PLX PCI 9050 workaround for local configuration register read bug */
353 pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, scaphys);
354 card->init_ctrl_value = readl(&((plx9050 __iomem *)card->scabase)->init_ctrl);
355 pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, plxphys);
356
357 if (pdev->device == PCI_DEVICE_ID_PC300_TE_1 ||
358 pdev->device == PCI_DEVICE_ID_PC300_TE_2)
359 card->type = PC300_TE; /* not fully supported */
360 else if (card->init_ctrl_value & PC300_CTYPE_MASK)
361 card->type = PC300_X21;
362 else
363 card->type = PC300_RSV;
364
365 if (pdev->device == PCI_DEVICE_ID_PC300_RX_1 ||
366 pdev->device == PCI_DEVICE_ID_PC300_TE_1)
367 card->n_ports = 1;
368 else
369 card->n_ports = 2;
370
371 for (i = 0; i < card->n_ports; i++)
372 if (!(card->ports[i].netdev = alloc_hdlcdev(&card->ports[i]))) {
373 pr_err("unable to allocate memory\n");
374 pc300_pci_remove_one(pdev);
375 return -ENOMEM;
376 }
377
378 /* Reset PLX */
379 p = &card->plxbase->init_ctrl;
380 writel(card->init_ctrl_value | 0x40000000, p);
381 readl(p); /* Flush the write - do not use sca_flush */
382 udelay(1);
383
384 writel(card->init_ctrl_value, p);
385 readl(p); /* Flush the write - do not use sca_flush */
386 udelay(1);
387
388 /* Reload Config. Registers from EEPROM */
389 writel(card->init_ctrl_value | 0x20000000, p);
390 readl(p); /* Flush the write - do not use sca_flush */
391 udelay(1);
392
393 writel(card->init_ctrl_value, p);
394 readl(p); /* Flush the write - do not use sca_flush */
395 udelay(1);
396
397 ramsize = sca_detect_ram(card, card->rambase,
398 pci_resource_len(pdev, 3));
399
400 if (use_crystal_clock)
401 card->init_ctrl_value &= ~PC300_CLKSEL_MASK;
402 else
403 card->init_ctrl_value |= PC300_CLKSEL_MASK;
404
405 writel(card->init_ctrl_value, &card->plxbase->init_ctrl);
406 /* number of TX + RX buffers for one port */
407 i = ramsize / (card->n_ports * (sizeof(pkt_desc) + HDLC_MAX_MRU));
408 card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
409 card->rx_ring_buffers = i - card->tx_ring_buffers;
410
411 card->buff_offset = card->n_ports * sizeof(pkt_desc) *
412 (card->tx_ring_buffers + card->rx_ring_buffers);
413
414 pr_info("PC300/%s, %u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n",
415 card->type == PC300_X21 ? "X21" :
416 card->type == PC300_TE ? "TE" : "RSV",
417 ramsize / 1024, ramphys, pdev->irq,
418 card->tx_ring_buffers, card->rx_ring_buffers);
419
420 if (card->tx_ring_buffers < 1) {
421 pr_err("RAM test failed\n");
422 pc300_pci_remove_one(pdev);
423 return -EFAULT;
424 }
425
426 /* Enable interrupts on the PCI bridge, LINTi1 active low */
427 writew(0x0041, &card->plxbase->intr_ctrl_stat);
428
429 /* Allocate IRQ */
430 if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pc300", card)) {
431 pr_warn("could not allocate IRQ%d\n", pdev->irq);
432 pc300_pci_remove_one(pdev);
433 return -EBUSY;
434 }
435 card->irq = pdev->irq;
436
437 sca_init(card, 0);
438
439 // COTE not set - allows better TX DMA settings
440 // sca_out(sca_in(PCR, card) | PCR_COTE, PCR, card);
441
442 sca_out(0x10, BTCR, card);
443
444 for (i = 0; i < card->n_ports; i++) {
445 port_t *port = &card->ports[i];
446 struct net_device *dev = port->netdev;
447 hdlc_device *hdlc = dev_to_hdlc(dev);
448 port->chan = i;
449
450 spin_lock_init(&port->lock);
451 dev->irq = card->irq;
452 dev->mem_start = ramphys;
453 dev->mem_end = ramphys + ramsize - 1;
454 dev->tx_queue_len = 50;
455 dev->netdev_ops = &pc300_ops;
456 hdlc->attach = sca_attach;
457 hdlc->xmit = sca_xmit;
458 port->settings.clock_type = CLOCK_EXT;
459 port->card = card;
460 if (card->type == PC300_X21)
461 port->iface = IF_IFACE_X21;
462 else
463 port->iface = IF_IFACE_V35;
464
465 sca_init_port(port);
466 if (register_hdlc_device(dev)) {
467 pr_err("unable to register hdlc device\n");
468 port->card = NULL;
469 pc300_pci_remove_one(pdev);
470 return -ENOBUFS;
471 }
472
473 netdev_info(dev, "PC300 channel %d\n", port->chan);
474 }
475 return 0;
476 }
477
478
479
480 static const struct pci_device_id pc300_pci_tbl[] = {
481 { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_1, PCI_ANY_ID,
482 PCI_ANY_ID, 0, 0, 0 },
483 { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_2, PCI_ANY_ID,
484 PCI_ANY_ID, 0, 0, 0 },
485 { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_1, PCI_ANY_ID,
486 PCI_ANY_ID, 0, 0, 0 },
487 { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_2, PCI_ANY_ID,
488 PCI_ANY_ID, 0, 0, 0 },
489 { 0, }
490 };
491
492
493 static struct pci_driver pc300_pci_driver = {
494 .name = "PC300",
495 .id_table = pc300_pci_tbl,
496 .probe = pc300_pci_init_one,
497 .remove = pc300_pci_remove_one,
498 };
499
500
501 static int __init pc300_init_module(void)
502 {
503 if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
504 pr_err("Invalid PCI clock frequency\n");
505 return -EINVAL;
506 }
507 if (use_crystal_clock != 0 && use_crystal_clock != 1) {
508 pr_err("Invalid 'use_crystal_clock' value\n");
509 return -EINVAL;
510 }
511
512 CLOCK_BASE = use_crystal_clock ? 24576000 : pci_clock_freq;
513
514 return pci_register_driver(&pc300_pci_driver);
515 }
516
517
518
519 static void __exit pc300_cleanup_module(void)
520 {
521 pci_unregister_driver(&pc300_pci_driver);
522 }
523
524 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
525 MODULE_DESCRIPTION("Cyclades PC300 serial port driver");
526 MODULE_LICENSE("GPL v2");
527 MODULE_DEVICE_TABLE(pci, pc300_pci_tbl);
528 module_param(pci_clock_freq, int, 0444);
529 MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
530 module_param(use_crystal_clock, int, 0444);
531 MODULE_PARM_DESC(use_crystal_clock,
532 "Use 24.576 MHz clock instead of PCI clock");
533 module_init(pc300_init_module);
534 module_exit(pc300_cleanup_module);
Linux with added FPC-III support