drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h

   1 /*
   2  * Copyright (c) 2010 Broadcom Corporation
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #ifndef BRCMFMAC_SDIO_H
  18 #define BRCMFMAC_SDIO_H
  19
  20 #include <linux/skbuff.h>
  21 #include <linux/firmware.h>
  22 #include "firmware.h"
  23
  24 #define SDIOD_FBR_SIZE          0x100
  25
  26 /* io_en */
  27 #define SDIO_FUNC_ENABLE_1      0x02
  28 #define SDIO_FUNC_ENABLE_2      0x04
  29
  30 /* io_rdys */
  31 #define SDIO_FUNC_READY_1       0x02
  32 #define SDIO_FUNC_READY_2       0x04
  33
  34 /* intr_status */
  35 #define INTR_STATUS_FUNC1       0x2
  36 #define INTR_STATUS_FUNC2       0x4
  37
  38 /* mask of register map */
  39 #define REG_F0_REG_MASK         0x7FF
  40 #define REG_F1_MISC_MASK        0x1FFFF
  41
  42 /* function 0 vendor specific CCCR registers */
  43
  44 #define SDIO_CCCR_BRCM_CARDCAP                  0xf0
  45 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT    BIT(1)
  46 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT        BIT(2)
  47 #define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC        BIT(3)
  48
  49 /* Interrupt enable bits for each function */
  50 #define SDIO_CCCR_IEN_FUNC0                     BIT(0)
  51 #define SDIO_CCCR_IEN_FUNC1                     BIT(1)
  52 #define SDIO_CCCR_IEN_FUNC2                     BIT(2)
  53
  54 #define SDIO_CCCR_BRCM_CARDCTRL                 0xf1
  55 #define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET       BIT(1)
  56
  57 #define SDIO_CCCR_BRCM_SEPINT                   0xf2
  58 #define SDIO_CCCR_BRCM_SEPINT_MASK              BIT(0)
  59 #define SDIO_CCCR_BRCM_SEPINT_OE                BIT(1)
  60 #define SDIO_CCCR_BRCM_SEPINT_ACT_HI            BIT(2)
  61
  62 /* function 1 miscellaneous registers */
  63
  64 /* sprom command and status */
  65 #define SBSDIO_SPROM_CS                 0x10000
  66 /* sprom info register */
  67 #define SBSDIO_SPROM_INFO               0x10001
  68 /* sprom indirect access data byte 0 */
  69 #define SBSDIO_SPROM_DATA_LOW           0x10002
  70 /* sprom indirect access data byte 1 */
  71 #define SBSDIO_SPROM_DATA_HIGH          0x10003
  72 /* sprom indirect access addr byte 0 */
  73 #define SBSDIO_SPROM_ADDR_LOW           0x10004
  74 /* gpio select */
  75 #define SBSDIO_GPIO_SELECT              0x10005
  76 /* gpio output */
  77 #define SBSDIO_GPIO_OUT                 0x10006
  78 /* gpio enable */
  79 #define SBSDIO_GPIO_EN                  0x10007
  80 /* rev < 7, watermark for sdio device */
  81 #define SBSDIO_WATERMARK                0x10008
  82 /* control busy signal generation */
  83 #define SBSDIO_DEVICE_CTL               0x10009
  84
  85 /* SB Address Window Low (b15) */
  86 #define SBSDIO_FUNC1_SBADDRLOW          0x1000A
  87 /* SB Address Window Mid (b23:b16) */
  88 #define SBSDIO_FUNC1_SBADDRMID          0x1000B
  89 /* SB Address Window High (b31:b24)    */
  90 #define SBSDIO_FUNC1_SBADDRHIGH         0x1000C
  91 /* Frame Control (frame term/abort) */
  92 #define SBSDIO_FUNC1_FRAMECTRL          0x1000D
  93 /* ChipClockCSR (ALP/HT ctl/status) */
  94 #define SBSDIO_FUNC1_CHIPCLKCSR         0x1000E
  95 /* SdioPullUp (on cmd, d0-d2) */
  96 #define SBSDIO_FUNC1_SDIOPULLUP         0x1000F
  97 /* Write Frame Byte Count Low */
  98 #define SBSDIO_FUNC1_WFRAMEBCLO         0x10019
  99 /* Write Frame Byte Count High */
 100 #define SBSDIO_FUNC1_WFRAMEBCHI         0x1001A
 101 /* Read Frame Byte Count Low */
 102 #define SBSDIO_FUNC1_RFRAMEBCLO         0x1001B
 103 /* Read Frame Byte Count High */
 104 #define SBSDIO_FUNC1_RFRAMEBCHI         0x1001C
 105 /* MesBusyCtl (rev 11) */
 106 #define SBSDIO_FUNC1_MESBUSYCTRL        0x1001D
 107 /* Sdio Core Rev 12 */
 108 #define SBSDIO_FUNC1_WAKEUPCTRL         0x1001E
 109 #define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK         0x1
 110 #define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT        0
 111 #define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK          0x2
 112 #define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT         1
 113 #define SBSDIO_FUNC1_SLEEPCSR           0x1001F
 114 #define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK          0x1
 115 #define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT         0
 116 #define SBSDIO_FUNC1_SLEEPCSR_KSO_EN            1
 117 #define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK        0x2
 118 #define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT       1
 119
 120 #define SBSDIO_FUNC1_MISC_REG_START     0x10000 /* f1 misc register start */
 121 #define SBSDIO_FUNC1_MISC_REG_LIMIT     0x1001F /* f1 misc register end */
 122
 123 /* function 1 OCP space */
 124
 125 /* sb offset addr is <= 15 bits, 32k */
 126 #define SBSDIO_SB_OFT_ADDR_MASK         0x07FFF
 127 #define SBSDIO_SB_OFT_ADDR_LIMIT        0x08000
 128 /* with b15, maps to 32-bit SB access */
 129 #define SBSDIO_SB_ACCESS_2_4B_FLAG      0x08000
 130
 131 /* Address bits from SBADDR regs */
 132 #define SBSDIO_SBWINDOW_MASK            0xffff8000
 133
 134 #define SDIOH_READ              0       /* Read request */
 135 #define SDIOH_WRITE             1       /* Write request */
 136
 137 #define SDIOH_DATA_FIX          0       /* Fixed addressing */
 138 #define SDIOH_DATA_INC          1       /* Incremental addressing */
 139
 140 /* internal return code */
 141 #define SUCCESS 0
 142 #define ERROR   1
 143
 144 /* Packet alignment for most efficient SDIO (can change based on platform) */
 145 #define BRCMF_SDALIGN   (1 << 6)
 146
 147 /* watchdog polling interval */
 148 #define BRCMF_WD_POLL   msecs_to_jiffies(10)
 149
 150 /**
 151  * enum brcmf_sdiod_state - the state of the bus.
 152  *
 153  * @BRCMF_SDIOD_DOWN: Device can be accessed, no DPC.
 154  * @BRCMF_SDIOD_DATA: Ready for data transfers, DPC enabled.
 155  * @BRCMF_SDIOD_NOMEDIUM: No medium access to dongle possible.
 156  */
 157 enum brcmf_sdiod_state {
 158         BRCMF_SDIOD_DOWN,
 159         BRCMF_SDIOD_DATA,
 160         BRCMF_SDIOD_NOMEDIUM
 161 };
 162
 163 struct brcmf_sdreg {
 164         int func;
 165         int offset;
 166         int value;
 167 };
 168
 169 struct brcmf_sdio;
 170 struct brcmf_sdiod_freezer;
 171
 172 struct brcmf_sdio_dev {
 173         struct sdio_func *func1;
 174         struct sdio_func *func2;
 175         u32 sbwad;                      /* Save backplane window address */
 176         struct brcmf_core *cc_core;     /* chipcommon core info struct */
 177         struct brcmf_sdio *bus;
 178         struct device *dev;
 179         struct brcmf_bus *bus_if;
 180         struct brcmf_mp_device *settings;
 181         bool oob_irq_requested;
 182         bool sd_irq_requested;
 183         bool irq_en;                    /* irq enable flags */
 184         spinlock_t irq_en_lock;
 185         bool irq_wake;                  /* irq wake enable flags */
 186         bool sg_support;
 187         uint max_request_size;
 188         ushort max_segment_count;
 189         uint max_segment_size;
 190         uint txglomsz;
 191         struct sg_table sgtable;
 192         char fw_name[BRCMF_FW_NAME_LEN];
 193         char nvram_name[BRCMF_FW_NAME_LEN];
 194         bool wowl_enabled;
 195         enum brcmf_sdiod_state state;
 196         struct brcmf_sdiod_freezer *freezer;
 197 };
 198
 199 /* sdio core registers */
 200 struct sdpcmd_regs {
 201         u32 corecontrol;                /* 0x00, rev8 */
 202         u32 corestatus;                 /* rev8 */
 203         u32 PAD[1];
 204         u32 biststatus;                 /* rev8 */
 205
 206         /* PCMCIA access */
 207         u16 pcmciamesportaladdr;        /* 0x010, rev8 */
 208         u16 PAD[1];
 209         u16 pcmciamesportalmask;        /* rev8 */
 210         u16 PAD[1];
 211         u16 pcmciawrframebc;            /* rev8 */
 212         u16 PAD[1];
 213         u16 pcmciaunderflowtimer;       /* rev8 */
 214         u16 PAD[1];
 215
 216         /* interrupt */
 217         u32 intstatus;                  /* 0x020, rev8 */
 218         u32 hostintmask;                /* rev8 */
 219         u32 intmask;                    /* rev8 */
 220         u32 sbintstatus;                /* rev8 */
 221         u32 sbintmask;                  /* rev8 */
 222         u32 funcintmask;                /* rev4 */
 223         u32 PAD[2];
 224         u32 tosbmailbox;                /* 0x040, rev8 */
 225         u32 tohostmailbox;              /* rev8 */
 226         u32 tosbmailboxdata;            /* rev8 */
 227         u32 tohostmailboxdata;          /* rev8 */
 228
 229         /* synchronized access to registers in SDIO clock domain */
 230         u32 sdioaccess;                 /* 0x050, rev8 */
 231         u32 PAD[3];
 232
 233         /* PCMCIA frame control */
 234         u8 pcmciaframectrl;             /* 0x060, rev8 */
 235         u8 PAD[3];
 236         u8 pcmciawatermark;             /* rev8 */
 237         u8 PAD[155];
 238
 239         /* interrupt batching control */
 240         u32 intrcvlazy;                 /* 0x100, rev8 */
 241         u32 PAD[3];
 242
 243         /* counters */
 244         u32 cmd52rd;                    /* 0x110, rev8 */
 245         u32 cmd52wr;                    /* rev8 */
 246         u32 cmd53rd;                    /* rev8 */
 247         u32 cmd53wr;                    /* rev8 */
 248         u32 abort;                      /* rev8 */
 249         u32 datacrcerror;               /* rev8 */
 250         u32 rdoutofsync;                /* rev8 */
 251         u32 wroutofsync;                /* rev8 */
 252         u32 writebusy;                  /* rev8 */
 253         u32 readwait;                   /* rev8 */
 254         u32 readterm;                   /* rev8 */
 255         u32 writeterm;                  /* rev8 */
 256         u32 PAD[40];
 257         u32 clockctlstatus;             /* rev8 */
 258         u32 PAD[7];
 259
 260         u32 PAD[128];                   /* DMA engines */
 261
 262         /* SDIO/PCMCIA CIS region */
 263         char cis[512];                  /* 0x400-0x5ff, rev6 */
 264
 265         /* PCMCIA function control registers */
 266         char pcmciafcr[256];            /* 0x600-6ff, rev6 */
 267         u16 PAD[55];
 268
 269         /* PCMCIA backplane access */
 270         u16 backplanecsr;               /* 0x76E, rev6 */
 271         u16 backplaneaddr0;             /* rev6 */
 272         u16 backplaneaddr1;             /* rev6 */
 273         u16 backplaneaddr2;             /* rev6 */
 274         u16 backplaneaddr3;             /* rev6 */
 275         u16 backplanedata0;             /* rev6 */
 276         u16 backplanedata1;             /* rev6 */
 277         u16 backplanedata2;             /* rev6 */
 278         u16 backplanedata3;             /* rev6 */
 279         u16 PAD[31];
 280
 281         /* sprom "size" & "blank" info */
 282         u16 spromstatus;                /* 0x7BE, rev2 */
 283         u32 PAD[464];
 284
 285         u16 PAD[0x80];
 286 };
 287
 288 /* Register/deregister interrupt handler. */
 289 int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
 290 void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 291
 292 /* SDIO device register access interface */
 293 /* Accessors for SDIO Function 0 */
 294 #define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
 295         sdio_f0_readb((sdiodev)->func1, (addr), (r))
 296
 297 #define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
 298         sdio_f0_writeb((sdiodev)->func1, (v), (addr), (ret))
 299
 300 /* Accessors for SDIO Function 1 */
 301 #define brcmf_sdiod_readb(sdiodev, addr, r) \
 302         sdio_readb((sdiodev)->func1, (addr), (r))
 303
 304 #define brcmf_sdiod_writeb(sdiodev, addr, v, ret) \
 305         sdio_writeb((sdiodev)->func1, (v), (addr), (ret))
 306
 307 u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
 308 void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
 309                         int *ret);
 310
 311 /* Buffer transfer to/from device (client) core via cmd53.
 312  *   fn:       function number
 313  *   flags:    backplane width, address increment, sync/async
 314  *   buf:      pointer to memory data buffer
 315  *   nbytes:   number of bytes to transfer to/from buf
 316  *   pkt:      pointer to packet associated with buf (if any)
 317  *   complete: callback function for command completion (async only)
 318  *   handle:   handle for completion callback (first arg in callback)
 319  * Returns 0 or error code.
 320  * NOTE: Async operation is not currently supported.
 321  */
 322 int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 323                          struct sk_buff_head *pktq);
 324 int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
 325
 326 int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt);
 327 int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
 328 int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 329                            struct sk_buff_head *pktq, uint totlen);
 330
 331 /* Flags bits */
 332
 333 /* Four-byte target (backplane) width (vs. two-byte) */
 334 #define SDIO_REQ_4BYTE  0x1
 335 /* Fixed address (FIFO) (vs. incrementing address) */
 336 #define SDIO_REQ_FIXED  0x2
 337
 338 /* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
 339  *   rw:       read or write (0/1)
 340  *   addr:     direct SDIO address
 341  *   buf:      pointer to memory data buffer
 342  *   nbytes:   number of bytes to transfer to/from buf
 343  * Returns 0 or error code.
 344  */
 345 int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 346                       u8 *data, uint size);
 347
 348 /* Issue an abort to the specified function */
 349 int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func);
 350
 351 void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
 352 void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
 353                               enum brcmf_sdiod_state state);
 354 #ifdef CONFIG_PM_SLEEP
 355 bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev);
 356 void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev);
 357 void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev);
 358 void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev);
 359 #else
 360 static inline bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev)
 361 {
 362         return false;
 363 }
 364 static inline void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev)
 365 {
 366 }
 367 static inline void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev)
 368 {
 369 }
 370 static inline void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev)
 371 {
 372 }
 373 #endif /* CONFIG_PM_SLEEP */
 374
 375 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
 376 void brcmf_sdio_remove(struct brcmf_sdio *bus);
 377 void brcmf_sdio_isr(struct brcmf_sdio *bus);
 378
 379 void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active);
 380 void brcmf_sdio_wowl_config(struct device *dev, bool enabled);
 381 int brcmf_sdio_sleep(struct brcmf_sdio *bus, bool sleep);
 382 void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus);
 383
 384 #endif /* BRCMFMAC_SDIO_H */