Linux 4.16.11
[linux/fpc-iii.git] / drivers / net / wireless / marvell / libertas / cmd.c
blobc1f42291873783cb8968a6075c158f348bd97b04
1 /*
2 * This file contains the handling of command.
3 * It prepares command and sends it to firmware when it is ready.
4 */
6 #include <linux/hardirq.h>
7 #include <linux/kfifo.h>
8 #include <linux/sched.h>
9 #include <linux/slab.h>
10 #include <linux/if_arp.h>
11 #include <linux/export.h>
13 #include "decl.h"
14 #include "cfg.h"
15 #include "cmd.h"
17 #define CAL_NF(nf) ((s32)(-(s32)(nf)))
18 #define CAL_RSSI(snr, nf) ((s32)((s32)(snr) + CAL_NF(nf)))
20 /**
21 * lbs_cmd_copyback - Simple callback that copies response back into command
23 * @priv: A pointer to &struct lbs_private structure
24 * @extra: A pointer to the original command structure for which
25 * 'resp' is a response
26 * @resp: A pointer to the command response
28 * returns: 0 on success, error on failure
30 int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
31 struct cmd_header *resp)
33 struct cmd_header *buf = (void *)extra;
34 uint16_t copy_len;
36 copy_len = min(le16_to_cpu(buf->size), le16_to_cpu(resp->size));
37 memcpy(buf, resp, copy_len);
38 return 0;
40 EXPORT_SYMBOL_GPL(lbs_cmd_copyback);
42 /**
43 * lbs_cmd_async_callback - Simple callback that ignores the result.
44 * Use this if you just want to send a command to the hardware, but don't
45 * care for the result.
47 * @priv: ignored
48 * @extra: ignored
49 * @resp: ignored
51 * returns: 0 for success
53 static int lbs_cmd_async_callback(struct lbs_private *priv, unsigned long extra,
54 struct cmd_header *resp)
56 return 0;
60 /**
61 * is_command_allowed_in_ps - tests if a command is allowed in Power Save mode
63 * @cmd: the command ID
65 * returns: 1 if allowed, 0 if not allowed
67 static u8 is_command_allowed_in_ps(u16 cmd)
69 switch (cmd) {
70 case CMD_802_11_RSSI:
71 return 1;
72 case CMD_802_11_HOST_SLEEP_CFG:
73 return 1;
74 default:
75 break;
77 return 0;
80 /**
81 * lbs_update_hw_spec - Updates the hardware details like MAC address
82 * and regulatory region
84 * @priv: A pointer to &struct lbs_private structure
86 * returns: 0 on success, error on failure
88 int lbs_update_hw_spec(struct lbs_private *priv)
90 struct cmd_ds_get_hw_spec cmd;
91 int ret = -1;
92 u32 i;
94 memset(&cmd, 0, sizeof(cmd));
95 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
96 memcpy(cmd.permanentaddr, priv->current_addr, ETH_ALEN);
97 ret = lbs_cmd_with_response(priv, CMD_GET_HW_SPEC, &cmd);
98 if (ret)
99 goto out;
101 priv->fwcapinfo = le32_to_cpu(cmd.fwcapinfo);
103 /* The firmware release is in an interesting format: the patch
104 * level is in the most significant nibble ... so fix that: */
105 priv->fwrelease = le32_to_cpu(cmd.fwrelease);
106 priv->fwrelease = (priv->fwrelease << 8) |
107 (priv->fwrelease >> 24 & 0xff);
109 /* Some firmware capabilities:
110 * CF card firmware 5.0.16p0: cap 0x00000303
111 * USB dongle firmware 5.110.17p2: cap 0x00000303
113 netdev_info(priv->dev, "%pM, fw %u.%u.%up%u, cap 0x%08x\n",
114 cmd.permanentaddr,
115 priv->fwrelease >> 24 & 0xff,
116 priv->fwrelease >> 16 & 0xff,
117 priv->fwrelease >> 8 & 0xff,
118 priv->fwrelease & 0xff,
119 priv->fwcapinfo);
120 lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n",
121 cmd.hwifversion, cmd.version);
123 /* Clamp region code to 8-bit since FW spec indicates that it should
124 * only ever be 8-bit, even though the field size is 16-bit. Some firmware
125 * returns non-zero high 8 bits here.
127 * Firmware version 4.0.102 used in CF8381 has region code shifted. We
128 * need to check for this problem and handle it properly.
130 if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V4)
131 priv->regioncode = (le16_to_cpu(cmd.regioncode) >> 8) & 0xFF;
132 else
133 priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
135 for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
136 /* use the region code to search for the index */
137 if (priv->regioncode == lbs_region_code_to_index[i])
138 break;
141 /* if it's unidentified region code, use the default (USA) */
142 if (i >= MRVDRV_MAX_REGION_CODE) {
143 priv->regioncode = 0x10;
144 netdev_info(priv->dev,
145 "unidentified region code; using the default (USA)\n");
148 if (priv->current_addr[0] == 0xff)
149 memmove(priv->current_addr, cmd.permanentaddr, ETH_ALEN);
151 if (!priv->copied_hwaddr) {
152 memcpy(priv->dev->dev_addr, priv->current_addr, ETH_ALEN);
153 if (priv->mesh_dev)
154 memcpy(priv->mesh_dev->dev_addr,
155 priv->current_addr, ETH_ALEN);
156 priv->copied_hwaddr = 1;
159 out:
160 return ret;
163 static int lbs_ret_host_sleep_cfg(struct lbs_private *priv, unsigned long dummy,
164 struct cmd_header *resp)
166 if (priv->is_host_sleep_activated) {
167 priv->is_host_sleep_configured = 0;
168 if (priv->psstate == PS_STATE_FULL_POWER) {
169 priv->is_host_sleep_activated = 0;
170 wake_up_interruptible(&priv->host_sleep_q);
172 } else {
173 priv->is_host_sleep_configured = 1;
176 return 0;
179 int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria,
180 struct wol_config *p_wol_config)
182 struct cmd_ds_host_sleep cmd_config;
183 int ret;
186 * Certain firmware versions do not support EHS_REMOVE_WAKEUP command
187 * and the card will return a failure. Since we need to be
188 * able to reset the mask, in those cases we set a 0 mask instead.
190 if (criteria == EHS_REMOVE_WAKEUP && !priv->ehs_remove_supported)
191 criteria = 0;
193 cmd_config.hdr.size = cpu_to_le16(sizeof(cmd_config));
194 cmd_config.criteria = cpu_to_le32(criteria);
195 cmd_config.gpio = priv->wol_gpio;
196 cmd_config.gap = priv->wol_gap;
198 if (p_wol_config != NULL)
199 memcpy((uint8_t *)&cmd_config.wol_conf, (uint8_t *)p_wol_config,
200 sizeof(struct wol_config));
201 else
202 cmd_config.wol_conf.action = CMD_ACT_ACTION_NONE;
204 ret = __lbs_cmd(priv, CMD_802_11_HOST_SLEEP_CFG, &cmd_config.hdr,
205 le16_to_cpu(cmd_config.hdr.size),
206 lbs_ret_host_sleep_cfg, 0);
207 if (!ret) {
208 if (p_wol_config)
209 memcpy((uint8_t *) p_wol_config,
210 (uint8_t *)&cmd_config.wol_conf,
211 sizeof(struct wol_config));
212 } else {
213 netdev_info(priv->dev, "HOST_SLEEP_CFG failed %d\n", ret);
216 return ret;
218 EXPORT_SYMBOL_GPL(lbs_host_sleep_cfg);
221 * lbs_set_ps_mode - Sets the Power Save mode
223 * @priv: A pointer to &struct lbs_private structure
224 * @cmd_action: The Power Save operation (PS_MODE_ACTION_ENTER_PS or
225 * PS_MODE_ACTION_EXIT_PS)
226 * @block: Whether to block on a response or not
228 * returns: 0 on success, error on failure
230 int lbs_set_ps_mode(struct lbs_private *priv, u16 cmd_action, bool block)
232 struct cmd_ds_802_11_ps_mode cmd;
233 int ret = 0;
235 memset(&cmd, 0, sizeof(cmd));
236 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
237 cmd.action = cpu_to_le16(cmd_action);
239 if (cmd_action == PS_MODE_ACTION_ENTER_PS) {
240 lbs_deb_cmd("PS_MODE: action ENTER_PS\n");
241 cmd.multipledtim = cpu_to_le16(1); /* Default DTIM multiple */
242 } else if (cmd_action == PS_MODE_ACTION_EXIT_PS) {
243 lbs_deb_cmd("PS_MODE: action EXIT_PS\n");
244 } else {
245 /* We don't handle CONFIRM_SLEEP here because it needs to
246 * be fastpathed to the firmware.
248 lbs_deb_cmd("PS_MODE: unknown action 0x%X\n", cmd_action);
249 ret = -EOPNOTSUPP;
250 goto out;
253 if (block)
254 ret = lbs_cmd_with_response(priv, CMD_802_11_PS_MODE, &cmd);
255 else
256 lbs_cmd_async(priv, CMD_802_11_PS_MODE, &cmd.hdr, sizeof (cmd));
258 out:
259 return ret;
262 int lbs_cmd_802_11_sleep_params(struct lbs_private *priv, uint16_t cmd_action,
263 struct sleep_params *sp)
265 struct cmd_ds_802_11_sleep_params cmd;
266 int ret;
268 if (cmd_action == CMD_ACT_GET) {
269 memset(&cmd, 0, sizeof(cmd));
270 } else {
271 cmd.error = cpu_to_le16(sp->sp_error);
272 cmd.offset = cpu_to_le16(sp->sp_offset);
273 cmd.stabletime = cpu_to_le16(sp->sp_stabletime);
274 cmd.calcontrol = sp->sp_calcontrol;
275 cmd.externalsleepclk = sp->sp_extsleepclk;
276 cmd.reserved = cpu_to_le16(sp->sp_reserved);
278 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
279 cmd.action = cpu_to_le16(cmd_action);
281 ret = lbs_cmd_with_response(priv, CMD_802_11_SLEEP_PARAMS, &cmd);
283 if (!ret) {
284 lbs_deb_cmd("error 0x%x, offset 0x%x, stabletime 0x%x, "
285 "calcontrol 0x%x extsleepclk 0x%x\n",
286 le16_to_cpu(cmd.error), le16_to_cpu(cmd.offset),
287 le16_to_cpu(cmd.stabletime), cmd.calcontrol,
288 cmd.externalsleepclk);
290 sp->sp_error = le16_to_cpu(cmd.error);
291 sp->sp_offset = le16_to_cpu(cmd.offset);
292 sp->sp_stabletime = le16_to_cpu(cmd.stabletime);
293 sp->sp_calcontrol = cmd.calcontrol;
294 sp->sp_extsleepclk = cmd.externalsleepclk;
295 sp->sp_reserved = le16_to_cpu(cmd.reserved);
298 return ret;
301 static int lbs_wait_for_ds_awake(struct lbs_private *priv)
303 int ret = 0;
305 if (priv->is_deep_sleep) {
306 if (!wait_event_interruptible_timeout(priv->ds_awake_q,
307 !priv->is_deep_sleep, (10 * HZ))) {
308 netdev_err(priv->dev, "ds_awake_q: timer expired\n");
309 ret = -1;
313 return ret;
316 int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep)
318 int ret = 0;
320 if (deep_sleep) {
321 if (priv->is_deep_sleep != 1) {
322 lbs_deb_cmd("deep sleep: sleep\n");
323 BUG_ON(!priv->enter_deep_sleep);
324 ret = priv->enter_deep_sleep(priv);
325 if (!ret) {
326 netif_stop_queue(priv->dev);
327 netif_carrier_off(priv->dev);
329 } else {
330 netdev_err(priv->dev, "deep sleep: already enabled\n");
332 } else {
333 if (priv->is_deep_sleep) {
334 lbs_deb_cmd("deep sleep: wakeup\n");
335 BUG_ON(!priv->exit_deep_sleep);
336 ret = priv->exit_deep_sleep(priv);
337 if (!ret) {
338 ret = lbs_wait_for_ds_awake(priv);
339 if (ret)
340 netdev_err(priv->dev,
341 "deep sleep: wakeup failed\n");
346 return ret;
349 static int lbs_ret_host_sleep_activate(struct lbs_private *priv,
350 unsigned long dummy,
351 struct cmd_header *cmd)
353 priv->is_host_sleep_activated = 1;
354 wake_up_interruptible(&priv->host_sleep_q);
356 return 0;
359 int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep)
361 struct cmd_header cmd;
362 int ret = 0;
363 uint32_t criteria = EHS_REMOVE_WAKEUP;
365 if (host_sleep) {
366 if (priv->is_host_sleep_activated != 1) {
367 memset(&cmd, 0, sizeof(cmd));
368 ret = lbs_host_sleep_cfg(priv, priv->wol_criteria,
369 (struct wol_config *)NULL);
370 if (ret) {
371 netdev_info(priv->dev,
372 "Host sleep configuration failed: %d\n",
373 ret);
374 return ret;
376 if (priv->psstate == PS_STATE_FULL_POWER) {
377 ret = __lbs_cmd(priv,
378 CMD_802_11_HOST_SLEEP_ACTIVATE,
379 &cmd,
380 sizeof(cmd),
381 lbs_ret_host_sleep_activate, 0);
382 if (ret)
383 netdev_info(priv->dev,
384 "HOST_SLEEP_ACTIVATE failed: %d\n",
385 ret);
388 if (!wait_event_interruptible_timeout(
389 priv->host_sleep_q,
390 priv->is_host_sleep_activated,
391 (10 * HZ))) {
392 netdev_err(priv->dev,
393 "host_sleep_q: timer expired\n");
394 ret = -1;
396 } else {
397 netdev_err(priv->dev, "host sleep: already enabled\n");
399 } else {
400 if (priv->is_host_sleep_activated)
401 ret = lbs_host_sleep_cfg(priv, criteria,
402 (struct wol_config *)NULL);
405 return ret;
409 * lbs_set_snmp_mib - Set an SNMP MIB value
411 * @priv: A pointer to &struct lbs_private structure
412 * @oid: The OID to set in the firmware
413 * @val: Value to set the OID to
415 * returns: 0 on success, error on failure
417 int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val)
419 struct cmd_ds_802_11_snmp_mib cmd;
420 int ret;
422 memset(&cmd, 0, sizeof (cmd));
423 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
424 cmd.action = cpu_to_le16(CMD_ACT_SET);
425 cmd.oid = cpu_to_le16((u16) oid);
427 switch (oid) {
428 case SNMP_MIB_OID_BSS_TYPE:
429 cmd.bufsize = cpu_to_le16(sizeof(u8));
430 cmd.value[0] = val;
431 break;
432 case SNMP_MIB_OID_11D_ENABLE:
433 case SNMP_MIB_OID_FRAG_THRESHOLD:
434 case SNMP_MIB_OID_RTS_THRESHOLD:
435 case SNMP_MIB_OID_SHORT_RETRY_LIMIT:
436 case SNMP_MIB_OID_LONG_RETRY_LIMIT:
437 cmd.bufsize = cpu_to_le16(sizeof(u16));
438 *((__le16 *)(&cmd.value)) = cpu_to_le16(val);
439 break;
440 default:
441 lbs_deb_cmd("SNMP_CMD: (set) unhandled OID 0x%x\n", oid);
442 ret = -EINVAL;
443 goto out;
446 lbs_deb_cmd("SNMP_CMD: (set) oid 0x%x, oid size 0x%x, value 0x%x\n",
447 le16_to_cpu(cmd.oid), le16_to_cpu(cmd.bufsize), val);
449 ret = lbs_cmd_with_response(priv, CMD_802_11_SNMP_MIB, &cmd);
451 out:
452 return ret;
456 * lbs_get_snmp_mib - Get an SNMP MIB value
458 * @priv: A pointer to &struct lbs_private structure
459 * @oid: The OID to retrieve from the firmware
460 * @out_val: Location for the returned value
462 * returns: 0 on success, error on failure
464 int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val)
466 struct cmd_ds_802_11_snmp_mib cmd;
467 int ret;
469 memset(&cmd, 0, sizeof (cmd));
470 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
471 cmd.action = cpu_to_le16(CMD_ACT_GET);
472 cmd.oid = cpu_to_le16(oid);
474 ret = lbs_cmd_with_response(priv, CMD_802_11_SNMP_MIB, &cmd);
475 if (ret)
476 goto out;
478 switch (le16_to_cpu(cmd.bufsize)) {
479 case sizeof(u8):
480 *out_val = cmd.value[0];
481 break;
482 case sizeof(u16):
483 *out_val = le16_to_cpu(*((__le16 *)(&cmd.value)));
484 break;
485 default:
486 lbs_deb_cmd("SNMP_CMD: (get) unhandled OID 0x%x size %d\n",
487 oid, le16_to_cpu(cmd.bufsize));
488 break;
491 out:
492 return ret;
496 * lbs_get_tx_power - Get the min, max, and current TX power
498 * @priv: A pointer to &struct lbs_private structure
499 * @curlevel: Current power level in dBm
500 * @minlevel: Minimum supported power level in dBm (optional)
501 * @maxlevel: Maximum supported power level in dBm (optional)
503 * returns: 0 on success, error on failure
505 int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel,
506 s16 *maxlevel)
508 struct cmd_ds_802_11_rf_tx_power cmd;
509 int ret;
511 memset(&cmd, 0, sizeof(cmd));
512 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
513 cmd.action = cpu_to_le16(CMD_ACT_GET);
515 ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd);
516 if (ret == 0) {
517 *curlevel = le16_to_cpu(cmd.curlevel);
518 if (minlevel)
519 *minlevel = cmd.minlevel;
520 if (maxlevel)
521 *maxlevel = cmd.maxlevel;
524 return ret;
528 * lbs_set_tx_power - Set the TX power
530 * @priv: A pointer to &struct lbs_private structure
531 * @dbm: The desired power level in dBm
533 * returns: 0 on success, error on failure
535 int lbs_set_tx_power(struct lbs_private *priv, s16 dbm)
537 struct cmd_ds_802_11_rf_tx_power cmd;
538 int ret;
540 memset(&cmd, 0, sizeof(cmd));
541 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
542 cmd.action = cpu_to_le16(CMD_ACT_SET);
543 cmd.curlevel = cpu_to_le16(dbm);
545 lbs_deb_cmd("SET_RF_TX_POWER: %d dBm\n", dbm);
547 ret = lbs_cmd_with_response(priv, CMD_802_11_RF_TX_POWER, &cmd);
549 return ret;
553 * lbs_set_monitor_mode - Enable or disable monitor mode
554 * (only implemented on OLPC usb8388 FW)
556 * @priv: A pointer to &struct lbs_private structure
557 * @enable: 1 to enable monitor mode, 0 to disable
559 * returns: 0 on success, error on failure
561 int lbs_set_monitor_mode(struct lbs_private *priv, int enable)
563 struct cmd_ds_802_11_monitor_mode cmd;
564 int ret;
566 memset(&cmd, 0, sizeof(cmd));
567 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
568 cmd.action = cpu_to_le16(CMD_ACT_SET);
569 if (enable)
570 cmd.mode = cpu_to_le16(0x1);
572 lbs_deb_cmd("SET_MONITOR_MODE: %d\n", enable);
574 ret = lbs_cmd_with_response(priv, CMD_802_11_MONITOR_MODE, &cmd);
575 if (ret == 0) {
576 priv->dev->type = enable ? ARPHRD_IEEE80211_RADIOTAP :
577 ARPHRD_ETHER;
580 return ret;
584 * lbs_get_channel - Get the radio channel
586 * @priv: A pointer to &struct lbs_private structure
588 * returns: The channel on success, error on failure
590 static int lbs_get_channel(struct lbs_private *priv)
592 struct cmd_ds_802_11_rf_channel cmd;
593 int ret = 0;
595 memset(&cmd, 0, sizeof(cmd));
596 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
597 cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_GET);
599 ret = lbs_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd);
600 if (ret)
601 goto out;
603 ret = le16_to_cpu(cmd.channel);
604 lbs_deb_cmd("current radio channel is %d\n", ret);
606 out:
607 return ret;
610 int lbs_update_channel(struct lbs_private *priv)
612 int ret;
614 /* the channel in f/w could be out of sync; get the current channel */
615 ret = lbs_get_channel(priv);
616 if (ret > 0) {
617 priv->channel = ret;
618 ret = 0;
621 return ret;
625 * lbs_set_channel - Set the radio channel
627 * @priv: A pointer to &struct lbs_private structure
628 * @channel: The desired channel, or 0 to clear a locked channel
630 * returns: 0 on success, error on failure
632 int lbs_set_channel(struct lbs_private *priv, u8 channel)
634 struct cmd_ds_802_11_rf_channel cmd;
635 #ifdef DEBUG
636 u8 old_channel = priv->channel;
637 #endif
638 int ret = 0;
640 memset(&cmd, 0, sizeof(cmd));
641 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
642 cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_SET);
643 cmd.channel = cpu_to_le16(channel);
645 ret = lbs_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd);
646 if (ret)
647 goto out;
649 priv->channel = (uint8_t) le16_to_cpu(cmd.channel);
650 lbs_deb_cmd("channel switch from %d to %d\n", old_channel,
651 priv->channel);
653 out:
654 return ret;
658 * lbs_get_rssi - Get current RSSI and noise floor
660 * @priv: A pointer to &struct lbs_private structure
661 * @rssi: On successful return, signal level in mBm
662 * @nf: On successful return, Noise floor
664 * returns: The channel on success, error on failure
666 int lbs_get_rssi(struct lbs_private *priv, s8 *rssi, s8 *nf)
668 struct cmd_ds_802_11_rssi cmd;
669 int ret = 0;
671 BUG_ON(rssi == NULL);
672 BUG_ON(nf == NULL);
674 memset(&cmd, 0, sizeof(cmd));
675 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
676 /* Average SNR over last 8 beacons */
677 cmd.n_or_snr = cpu_to_le16(8);
679 ret = lbs_cmd_with_response(priv, CMD_802_11_RSSI, &cmd);
680 if (ret == 0) {
681 *nf = CAL_NF(le16_to_cpu(cmd.nf));
682 *rssi = CAL_RSSI(le16_to_cpu(cmd.n_or_snr), le16_to_cpu(cmd.nf));
685 return ret;
689 * lbs_set_11d_domain_info - Send regulatory and 802.11d domain information
690 * to the firmware
692 * @priv: pointer to &struct lbs_private
694 * returns: 0 on success, error code on failure
696 int lbs_set_11d_domain_info(struct lbs_private *priv)
698 struct wiphy *wiphy = priv->wdev->wiphy;
699 struct ieee80211_supported_band **bands = wiphy->bands;
700 struct cmd_ds_802_11d_domain_info cmd;
701 struct mrvl_ie_domain_param_set *domain = &cmd.domain;
702 struct ieee80211_country_ie_triplet *t;
703 enum nl80211_band band;
704 struct ieee80211_channel *ch;
705 u8 num_triplet = 0;
706 u8 num_parsed_chan = 0;
707 u8 first_channel = 0, next_chan = 0, max_pwr = 0;
708 u8 i, flag = 0;
709 size_t triplet_size;
710 int ret = 0;
712 if (!priv->country_code[0])
713 goto out;
715 memset(&cmd, 0, sizeof(cmd));
716 cmd.action = cpu_to_le16(CMD_ACT_SET);
718 lbs_deb_11d("Setting country code '%c%c'\n",
719 priv->country_code[0], priv->country_code[1]);
721 domain->header.type = cpu_to_le16(TLV_TYPE_DOMAIN);
723 /* Set country code */
724 domain->country_code[0] = priv->country_code[0];
725 domain->country_code[1] = priv->country_code[1];
726 domain->country_code[2] = ' ';
728 /* Now set up the channel triplets; firmware is somewhat picky here
729 * and doesn't validate channel numbers and spans; hence it would
730 * interpret a triplet of (36, 4, 20) as channels 36, 37, 38, 39. Since
731 * the last 3 aren't valid channels, the driver is responsible for
732 * splitting that up into 4 triplet pairs of (36, 1, 20) + (40, 1, 20)
733 * etc.
735 for (band = 0;
736 (band < NUM_NL80211_BANDS) && (num_triplet < MAX_11D_TRIPLETS);
737 band++) {
739 if (!bands[band])
740 continue;
742 for (i = 0;
743 (i < bands[band]->n_channels) && (num_triplet < MAX_11D_TRIPLETS);
744 i++) {
745 ch = &bands[band]->channels[i];
746 if (ch->flags & IEEE80211_CHAN_DISABLED)
747 continue;
749 if (!flag) {
750 flag = 1;
751 next_chan = first_channel = (u32) ch->hw_value;
752 max_pwr = ch->max_power;
753 num_parsed_chan = 1;
754 continue;
757 if ((ch->hw_value == next_chan + 1) &&
758 (ch->max_power == max_pwr)) {
759 /* Consolidate adjacent channels */
760 next_chan++;
761 num_parsed_chan++;
762 } else {
763 /* Add this triplet */
764 lbs_deb_11d("11D triplet (%d, %d, %d)\n",
765 first_channel, num_parsed_chan,
766 max_pwr);
767 t = &domain->triplet[num_triplet];
768 t->chans.first_channel = first_channel;
769 t->chans.num_channels = num_parsed_chan;
770 t->chans.max_power = max_pwr;
771 num_triplet++;
772 flag = 0;
776 if (flag) {
777 /* Add last triplet */
778 lbs_deb_11d("11D triplet (%d, %d, %d)\n", first_channel,
779 num_parsed_chan, max_pwr);
780 t = &domain->triplet[num_triplet];
781 t->chans.first_channel = first_channel;
782 t->chans.num_channels = num_parsed_chan;
783 t->chans.max_power = max_pwr;
784 num_triplet++;
788 lbs_deb_11d("# triplets %d\n", num_triplet);
790 /* Set command header sizes */
791 triplet_size = num_triplet * sizeof(struct ieee80211_country_ie_triplet);
792 domain->header.len = cpu_to_le16(sizeof(domain->country_code) +
793 triplet_size);
795 lbs_deb_hex(LBS_DEB_11D, "802.11D domain param set",
796 (u8 *) &cmd.domain.country_code,
797 le16_to_cpu(domain->header.len));
799 cmd.hdr.size = cpu_to_le16(sizeof(cmd.hdr) +
800 sizeof(cmd.action) +
801 sizeof(cmd.domain.header) +
802 sizeof(cmd.domain.country_code) +
803 triplet_size);
805 ret = lbs_cmd_with_response(priv, CMD_802_11D_DOMAIN_INFO, &cmd);
807 out:
808 return ret;
812 * lbs_get_reg - Read a MAC, Baseband, or RF register
814 * @priv: pointer to &struct lbs_private
815 * @reg: register command, one of CMD_MAC_REG_ACCESS,
816 * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
817 * @offset: byte offset of the register to get
818 * @value: on success, the value of the register at 'offset'
820 * returns: 0 on success, error code on failure
822 int lbs_get_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 *value)
824 struct cmd_ds_reg_access cmd;
825 int ret = 0;
827 BUG_ON(value == NULL);
829 memset(&cmd, 0, sizeof(cmd));
830 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
831 cmd.action = cpu_to_le16(CMD_ACT_GET);
832 cmd.offset = cpu_to_le16(offset);
834 if (reg != CMD_MAC_REG_ACCESS &&
835 reg != CMD_BBP_REG_ACCESS &&
836 reg != CMD_RF_REG_ACCESS) {
837 ret = -EINVAL;
838 goto out;
841 ret = lbs_cmd_with_response(priv, reg, &cmd);
842 if (!ret) {
843 if (reg == CMD_BBP_REG_ACCESS || reg == CMD_RF_REG_ACCESS)
844 *value = cmd.value.bbp_rf;
845 else if (reg == CMD_MAC_REG_ACCESS)
846 *value = le32_to_cpu(cmd.value.mac);
849 out:
850 return ret;
854 * lbs_set_reg - Write a MAC, Baseband, or RF register
856 * @priv: pointer to &struct lbs_private
857 * @reg: register command, one of CMD_MAC_REG_ACCESS,
858 * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
859 * @offset: byte offset of the register to set
860 * @value: the value to write to the register at 'offset'
862 * returns: 0 on success, error code on failure
864 int lbs_set_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 value)
866 struct cmd_ds_reg_access cmd;
867 int ret = 0;
869 memset(&cmd, 0, sizeof(cmd));
870 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
871 cmd.action = cpu_to_le16(CMD_ACT_SET);
872 cmd.offset = cpu_to_le16(offset);
874 if (reg == CMD_BBP_REG_ACCESS || reg == CMD_RF_REG_ACCESS)
875 cmd.value.bbp_rf = (u8) (value & 0xFF);
876 else if (reg == CMD_MAC_REG_ACCESS)
877 cmd.value.mac = cpu_to_le32(value);
878 else {
879 ret = -EINVAL;
880 goto out;
883 ret = lbs_cmd_with_response(priv, reg, &cmd);
885 out:
886 return ret;
889 static void lbs_queue_cmd(struct lbs_private *priv,
890 struct cmd_ctrl_node *cmdnode)
892 unsigned long flags;
893 int addtail = 1;
895 if (!cmdnode) {
896 lbs_deb_host("QUEUE_CMD: cmdnode is NULL\n");
897 return;
899 if (!cmdnode->cmdbuf->size) {
900 lbs_deb_host("DNLD_CMD: cmd size is zero\n");
901 return;
903 cmdnode->result = 0;
905 /* Exit_PS command needs to be queued in the header always. */
906 if (le16_to_cpu(cmdnode->cmdbuf->command) == CMD_802_11_PS_MODE) {
907 struct cmd_ds_802_11_ps_mode *psm = (void *)cmdnode->cmdbuf;
909 if (psm->action == cpu_to_le16(PS_MODE_ACTION_EXIT_PS)) {
910 if (priv->psstate != PS_STATE_FULL_POWER)
911 addtail = 0;
915 if (le16_to_cpu(cmdnode->cmdbuf->command) == CMD_802_11_WAKEUP_CONFIRM)
916 addtail = 0;
918 spin_lock_irqsave(&priv->driver_lock, flags);
920 if (addtail)
921 list_add_tail(&cmdnode->list, &priv->cmdpendingq);
922 else
923 list_add(&cmdnode->list, &priv->cmdpendingq);
925 spin_unlock_irqrestore(&priv->driver_lock, flags);
927 lbs_deb_host("QUEUE_CMD: inserted command 0x%04x into cmdpendingq\n",
928 le16_to_cpu(cmdnode->cmdbuf->command));
931 static void lbs_submit_command(struct lbs_private *priv,
932 struct cmd_ctrl_node *cmdnode)
934 unsigned long flags;
935 struct cmd_header *cmd;
936 uint16_t cmdsize;
937 uint16_t command;
938 int timeo = 3 * HZ;
939 int ret;
941 cmd = cmdnode->cmdbuf;
943 spin_lock_irqsave(&priv->driver_lock, flags);
944 priv->seqnum++;
945 cmd->seqnum = cpu_to_le16(priv->seqnum);
946 priv->cur_cmd = cmdnode;
947 spin_unlock_irqrestore(&priv->driver_lock, flags);
949 cmdsize = le16_to_cpu(cmd->size);
950 command = le16_to_cpu(cmd->command);
952 /* These commands take longer */
953 if (command == CMD_802_11_SCAN || command == CMD_802_11_ASSOCIATE)
954 timeo = 5 * HZ;
956 lbs_deb_cmd("DNLD_CMD: command 0x%04x, seq %d, size %d\n",
957 command, le16_to_cpu(cmd->seqnum), cmdsize);
958 lbs_deb_hex(LBS_DEB_CMD, "DNLD_CMD", (void *) cmdnode->cmdbuf, cmdsize);
960 ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize);
962 if (ret) {
963 netdev_info(priv->dev, "DNLD_CMD: hw_host_to_card failed: %d\n",
964 ret);
965 /* Reset dnld state machine, report failure */
966 priv->dnld_sent = DNLD_RES_RECEIVED;
967 lbs_complete_command(priv, cmdnode, ret);
970 if (command == CMD_802_11_DEEP_SLEEP) {
971 if (priv->is_auto_deep_sleep_enabled) {
972 priv->wakeup_dev_required = 1;
973 priv->dnld_sent = 0;
975 priv->is_deep_sleep = 1;
976 lbs_complete_command(priv, cmdnode, 0);
977 } else {
978 /* Setup the timer after transmit command */
979 mod_timer(&priv->command_timer, jiffies + timeo);
984 * This function inserts command node to cmdfreeq
985 * after cleans it. Requires priv->driver_lock held.
987 static void __lbs_cleanup_and_insert_cmd(struct lbs_private *priv,
988 struct cmd_ctrl_node *cmdnode)
990 if (!cmdnode)
991 return;
993 cmdnode->callback = NULL;
994 cmdnode->callback_arg = 0;
996 memset(cmdnode->cmdbuf, 0, LBS_CMD_BUFFER_SIZE);
998 list_add_tail(&cmdnode->list, &priv->cmdfreeq);
1001 static void lbs_cleanup_and_insert_cmd(struct lbs_private *priv,
1002 struct cmd_ctrl_node *ptempcmd)
1004 unsigned long flags;
1006 spin_lock_irqsave(&priv->driver_lock, flags);
1007 __lbs_cleanup_and_insert_cmd(priv, ptempcmd);
1008 spin_unlock_irqrestore(&priv->driver_lock, flags);
1011 void __lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd,
1012 int result)
1015 * Normally, commands are removed from cmdpendingq before being
1016 * submitted. However, we can arrive here on alternative codepaths
1017 * where the command is still pending. Make sure the command really
1018 * isn't part of a list at this point.
1020 list_del_init(&cmd->list);
1022 cmd->result = result;
1023 cmd->cmdwaitqwoken = 1;
1024 wake_up(&cmd->cmdwait_q);
1026 if (!cmd->callback || cmd->callback == lbs_cmd_async_callback)
1027 __lbs_cleanup_and_insert_cmd(priv, cmd);
1028 priv->cur_cmd = NULL;
1029 wake_up(&priv->waitq);
1032 void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd,
1033 int result)
1035 unsigned long flags;
1036 spin_lock_irqsave(&priv->driver_lock, flags);
1037 __lbs_complete_command(priv, cmd, result);
1038 spin_unlock_irqrestore(&priv->driver_lock, flags);
1041 int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on)
1043 struct cmd_ds_802_11_radio_control cmd;
1044 int ret = -EINVAL;
1046 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1047 cmd.action = cpu_to_le16(CMD_ACT_SET);
1048 cmd.control = 0;
1050 /* Only v8 and below support setting the preamble */
1051 if (priv->fwrelease < 0x09000000) {
1052 switch (preamble) {
1053 case RADIO_PREAMBLE_SHORT:
1054 case RADIO_PREAMBLE_AUTO:
1055 case RADIO_PREAMBLE_LONG:
1056 cmd.control = cpu_to_le16(preamble);
1057 break;
1058 default:
1059 goto out;
1063 if (radio_on)
1064 cmd.control |= cpu_to_le16(0x1);
1065 else {
1066 cmd.control &= cpu_to_le16(~0x1);
1067 priv->txpower_cur = 0;
1070 lbs_deb_cmd("RADIO_CONTROL: radio %s, preamble %d\n",
1071 radio_on ? "ON" : "OFF", preamble);
1073 priv->radio_on = radio_on;
1075 ret = lbs_cmd_with_response(priv, CMD_802_11_RADIO_CONTROL, &cmd);
1077 out:
1078 return ret;
1081 void lbs_set_mac_control(struct lbs_private *priv)
1083 struct cmd_ds_mac_control cmd;
1085 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1086 cmd.action = cpu_to_le16(priv->mac_control);
1087 cmd.reserved = 0;
1089 lbs_cmd_async(priv, CMD_MAC_CONTROL, &cmd.hdr, sizeof(cmd));
1092 int lbs_set_mac_control_sync(struct lbs_private *priv)
1094 struct cmd_ds_mac_control cmd;
1095 int ret = 0;
1097 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1098 cmd.action = cpu_to_le16(priv->mac_control);
1099 cmd.reserved = 0;
1100 ret = lbs_cmd_with_response(priv, CMD_MAC_CONTROL, &cmd);
1102 return ret;
1106 * lbs_allocate_cmd_buffer - allocates the command buffer and links
1107 * it to command free queue
1109 * @priv: A pointer to &struct lbs_private structure
1111 * returns: 0 for success or -1 on error
1113 int lbs_allocate_cmd_buffer(struct lbs_private *priv)
1115 int ret = 0;
1116 u32 bufsize;
1117 u32 i;
1118 struct cmd_ctrl_node *cmdarray;
1120 /* Allocate and initialize the command array */
1121 bufsize = sizeof(struct cmd_ctrl_node) * LBS_NUM_CMD_BUFFERS;
1122 if (!(cmdarray = kzalloc(bufsize, GFP_KERNEL))) {
1123 lbs_deb_host("ALLOC_CMD_BUF: tempcmd_array is NULL\n");
1124 ret = -1;
1125 goto done;
1127 priv->cmd_array = cmdarray;
1129 /* Allocate and initialize each command buffer in the command array */
1130 for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) {
1131 cmdarray[i].cmdbuf = kzalloc(LBS_CMD_BUFFER_SIZE, GFP_KERNEL);
1132 if (!cmdarray[i].cmdbuf) {
1133 lbs_deb_host("ALLOC_CMD_BUF: ptempvirtualaddr is NULL\n");
1134 ret = -1;
1135 goto done;
1139 for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) {
1140 init_waitqueue_head(&cmdarray[i].cmdwait_q);
1141 lbs_cleanup_and_insert_cmd(priv, &cmdarray[i]);
1143 ret = 0;
1145 done:
1146 return ret;
1150 * lbs_free_cmd_buffer - free the command buffer
1152 * @priv: A pointer to &struct lbs_private structure
1154 * returns: 0 for success
1156 int lbs_free_cmd_buffer(struct lbs_private *priv)
1158 struct cmd_ctrl_node *cmdarray;
1159 unsigned int i;
1161 /* need to check if cmd array is allocated or not */
1162 if (priv->cmd_array == NULL) {
1163 lbs_deb_host("FREE_CMD_BUF: cmd_array is NULL\n");
1164 goto done;
1167 cmdarray = priv->cmd_array;
1169 /* Release shared memory buffers */
1170 for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) {
1171 if (cmdarray[i].cmdbuf) {
1172 kfree(cmdarray[i].cmdbuf);
1173 cmdarray[i].cmdbuf = NULL;
1177 /* Release cmd_ctrl_node */
1178 if (priv->cmd_array) {
1179 kfree(priv->cmd_array);
1180 priv->cmd_array = NULL;
1183 done:
1184 return 0;
1188 * lbs_get_free_cmd_node - gets a free command node if available in
1189 * command free queue
1191 * @priv: A pointer to &struct lbs_private structure
1193 * returns: A pointer to &cmd_ctrl_node structure on success
1194 * or %NULL on error
1196 static struct cmd_ctrl_node *lbs_get_free_cmd_node(struct lbs_private *priv)
1198 struct cmd_ctrl_node *tempnode;
1199 unsigned long flags;
1201 if (!priv)
1202 return NULL;
1204 spin_lock_irqsave(&priv->driver_lock, flags);
1206 if (!list_empty(&priv->cmdfreeq)) {
1207 tempnode = list_first_entry(&priv->cmdfreeq,
1208 struct cmd_ctrl_node, list);
1209 list_del_init(&tempnode->list);
1210 } else {
1211 lbs_deb_host("GET_CMD_NODE: cmd_ctrl_node is not available\n");
1212 tempnode = NULL;
1215 spin_unlock_irqrestore(&priv->driver_lock, flags);
1217 return tempnode;
1221 * lbs_execute_next_command - execute next command in command
1222 * pending queue. Will put firmware back to PS mode if applicable.
1224 * @priv: A pointer to &struct lbs_private structure
1226 * returns: 0 on success or -1 on error
1228 int lbs_execute_next_command(struct lbs_private *priv)
1230 struct cmd_ctrl_node *cmdnode = NULL;
1231 struct cmd_header *cmd;
1232 unsigned long flags;
1233 int ret = 0;
1235 /* Debug group is LBS_DEB_THREAD and not LBS_DEB_HOST, because the
1236 * only caller to us is lbs_thread() and we get even when a
1237 * data packet is received */
1238 spin_lock_irqsave(&priv->driver_lock, flags);
1240 if (priv->cur_cmd) {
1241 netdev_alert(priv->dev,
1242 "EXEC_NEXT_CMD: already processing command!\n");
1243 spin_unlock_irqrestore(&priv->driver_lock, flags);
1244 ret = -1;
1245 goto done;
1248 if (!list_empty(&priv->cmdpendingq)) {
1249 cmdnode = list_first_entry(&priv->cmdpendingq,
1250 struct cmd_ctrl_node, list);
1253 spin_unlock_irqrestore(&priv->driver_lock, flags);
1255 if (cmdnode) {
1256 cmd = cmdnode->cmdbuf;
1258 if (is_command_allowed_in_ps(le16_to_cpu(cmd->command))) {
1259 if ((priv->psstate == PS_STATE_SLEEP) ||
1260 (priv->psstate == PS_STATE_PRE_SLEEP)) {
1261 lbs_deb_host(
1262 "EXEC_NEXT_CMD: cannot send cmd 0x%04x in psstate %d\n",
1263 le16_to_cpu(cmd->command),
1264 priv->psstate);
1265 ret = -1;
1266 goto done;
1268 lbs_deb_host("EXEC_NEXT_CMD: OK to send command "
1269 "0x%04x in psstate %d\n",
1270 le16_to_cpu(cmd->command), priv->psstate);
1271 } else if (priv->psstate != PS_STATE_FULL_POWER) {
1273 * 1. Non-PS command:
1274 * Queue it. set needtowakeup to TRUE if current state
1275 * is SLEEP, otherwise call send EXIT_PS.
1276 * 2. PS command but not EXIT_PS:
1277 * Ignore it.
1278 * 3. PS command EXIT_PS:
1279 * Set needtowakeup to TRUE if current state is SLEEP,
1280 * otherwise send this command down to firmware
1281 * immediately.
1283 if (cmd->command != cpu_to_le16(CMD_802_11_PS_MODE)) {
1284 /* Prepare to send Exit PS,
1285 * this non PS command will be sent later */
1286 if ((priv->psstate == PS_STATE_SLEEP)
1287 || (priv->psstate == PS_STATE_PRE_SLEEP)
1289 /* w/ new scheme, it will not reach here.
1290 since it is blocked in main_thread. */
1291 priv->needtowakeup = 1;
1292 } else {
1293 lbs_set_ps_mode(priv,
1294 PS_MODE_ACTION_EXIT_PS,
1295 false);
1298 ret = 0;
1299 goto done;
1300 } else {
1302 * PS command. Ignore it if it is not Exit_PS.
1303 * otherwise send it down immediately.
1305 struct cmd_ds_802_11_ps_mode *psm = (void *)cmd;
1307 lbs_deb_host(
1308 "EXEC_NEXT_CMD: PS cmd, action 0x%02x\n",
1309 psm->action);
1310 if (psm->action !=
1311 cpu_to_le16(PS_MODE_ACTION_EXIT_PS)) {
1312 lbs_deb_host(
1313 "EXEC_NEXT_CMD: ignore ENTER_PS cmd\n");
1314 lbs_complete_command(priv, cmdnode, 0);
1316 ret = 0;
1317 goto done;
1320 if ((priv->psstate == PS_STATE_SLEEP) ||
1321 (priv->psstate == PS_STATE_PRE_SLEEP)) {
1322 lbs_deb_host(
1323 "EXEC_NEXT_CMD: ignore EXIT_PS cmd in sleep\n");
1324 lbs_complete_command(priv, cmdnode, 0);
1325 priv->needtowakeup = 1;
1327 ret = 0;
1328 goto done;
1331 lbs_deb_host(
1332 "EXEC_NEXT_CMD: sending EXIT_PS\n");
1335 spin_lock_irqsave(&priv->driver_lock, flags);
1336 list_del_init(&cmdnode->list);
1337 spin_unlock_irqrestore(&priv->driver_lock, flags);
1338 lbs_deb_host("EXEC_NEXT_CMD: sending command 0x%04x\n",
1339 le16_to_cpu(cmd->command));
1340 lbs_submit_command(priv, cmdnode);
1341 } else {
1343 * check if in power save mode, if yes, put the device back
1344 * to PS mode
1346 if ((priv->psmode != LBS802_11POWERMODECAM) &&
1347 (priv->psstate == PS_STATE_FULL_POWER) &&
1348 (priv->connect_status == LBS_CONNECTED)) {
1349 lbs_deb_host(
1350 "EXEC_NEXT_CMD: cmdpendingq empty, go back to PS_SLEEP");
1351 lbs_set_ps_mode(priv, PS_MODE_ACTION_ENTER_PS,
1352 false);
1356 ret = 0;
1357 done:
1358 return ret;
1361 static void lbs_send_confirmsleep(struct lbs_private *priv)
1363 unsigned long flags;
1364 int ret;
1366 lbs_deb_hex(LBS_DEB_HOST, "sleep confirm", (u8 *) &confirm_sleep,
1367 sizeof(confirm_sleep));
1369 ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &confirm_sleep,
1370 sizeof(confirm_sleep));
1371 if (ret) {
1372 netdev_alert(priv->dev, "confirm_sleep failed\n");
1373 return;
1376 spin_lock_irqsave(&priv->driver_lock, flags);
1378 /* We don't get a response on the sleep-confirmation */
1379 priv->dnld_sent = DNLD_RES_RECEIVED;
1381 if (priv->is_host_sleep_configured) {
1382 priv->is_host_sleep_activated = 1;
1383 wake_up_interruptible(&priv->host_sleep_q);
1386 /* If nothing to do, go back to sleep (?) */
1387 if (!kfifo_len(&priv->event_fifo) && !priv->resp_len[priv->resp_idx])
1388 priv->psstate = PS_STATE_SLEEP;
1390 spin_unlock_irqrestore(&priv->driver_lock, flags);
1394 * lbs_ps_confirm_sleep - checks condition and prepares to
1395 * send sleep confirm command to firmware if ok
1397 * @priv: A pointer to &struct lbs_private structure
1399 * returns: n/a
1401 void lbs_ps_confirm_sleep(struct lbs_private *priv)
1403 unsigned long flags =0;
1404 int allowed = 1;
1406 spin_lock_irqsave(&priv->driver_lock, flags);
1407 if (priv->dnld_sent) {
1408 allowed = 0;
1409 lbs_deb_host("dnld_sent was set\n");
1412 /* In-progress command? */
1413 if (priv->cur_cmd) {
1414 allowed = 0;
1415 lbs_deb_host("cur_cmd was set\n");
1418 /* Pending events or command responses? */
1419 if (kfifo_len(&priv->event_fifo) || priv->resp_len[priv->resp_idx]) {
1420 allowed = 0;
1421 lbs_deb_host("pending events or command responses\n");
1423 spin_unlock_irqrestore(&priv->driver_lock, flags);
1425 if (allowed) {
1426 lbs_deb_host("sending lbs_ps_confirm_sleep\n");
1427 lbs_send_confirmsleep(priv);
1428 } else {
1429 lbs_deb_host("sleep confirm has been delayed\n");
1435 * lbs_set_tpc_cfg - Configures the transmission power control functionality
1437 * @priv: A pointer to &struct lbs_private structure
1438 * @enable: Transmission power control enable
1439 * @p0: Power level when link quality is good (dBm).
1440 * @p1: Power level when link quality is fair (dBm).
1441 * @p2: Power level when link quality is poor (dBm).
1442 * @usesnr: Use Signal to Noise Ratio in TPC
1444 * returns: 0 on success
1446 int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
1447 int8_t p2, int usesnr)
1449 struct cmd_ds_802_11_tpc_cfg cmd;
1450 int ret;
1452 memset(&cmd, 0, sizeof(cmd));
1453 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1454 cmd.action = cpu_to_le16(CMD_ACT_SET);
1455 cmd.enable = !!enable;
1456 cmd.usesnr = !!usesnr;
1457 cmd.P0 = p0;
1458 cmd.P1 = p1;
1459 cmd.P2 = p2;
1461 ret = lbs_cmd_with_response(priv, CMD_802_11_TPC_CFG, &cmd);
1463 return ret;
1467 * lbs_set_power_adapt_cfg - Configures the power adaptation settings
1469 * @priv: A pointer to &struct lbs_private structure
1470 * @enable: Power adaptation enable
1471 * @p0: Power level for 1, 2, 5.5 and 11 Mbps (dBm).
1472 * @p1: Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
1473 * @p2: Power level for 48 and 54 Mbps (dBm).
1475 * returns: 0 on Success
1478 int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
1479 int8_t p1, int8_t p2)
1481 struct cmd_ds_802_11_pa_cfg cmd;
1482 int ret;
1484 memset(&cmd, 0, sizeof(cmd));
1485 cmd.hdr.size = cpu_to_le16(sizeof(cmd));
1486 cmd.action = cpu_to_le16(CMD_ACT_SET);
1487 cmd.enable = !!enable;
1488 cmd.P0 = p0;
1489 cmd.P1 = p1;
1490 cmd.P2 = p2;
1492 ret = lbs_cmd_with_response(priv, CMD_802_11_PA_CFG , &cmd);
1494 return ret;
1498 struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
1499 uint16_t command, struct cmd_header *in_cmd, int in_cmd_size,
1500 int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
1501 unsigned long callback_arg)
1503 struct cmd_ctrl_node *cmdnode;
1505 if (priv->surpriseremoved) {
1506 lbs_deb_host("PREP_CMD: card removed\n");
1507 cmdnode = ERR_PTR(-ENOENT);
1508 goto done;
1511 /* No commands are allowed in Deep Sleep until we toggle the GPIO
1512 * to wake up the card and it has signaled that it's ready.
1514 if (!priv->is_auto_deep_sleep_enabled) {
1515 if (priv->is_deep_sleep) {
1516 lbs_deb_cmd("command not allowed in deep sleep\n");
1517 cmdnode = ERR_PTR(-EBUSY);
1518 goto done;
1522 cmdnode = lbs_get_free_cmd_node(priv);
1523 if (cmdnode == NULL) {
1524 lbs_deb_host("PREP_CMD: cmdnode is NULL\n");
1526 /* Wake up main thread to execute next command */
1527 wake_up(&priv->waitq);
1528 cmdnode = ERR_PTR(-ENOBUFS);
1529 goto done;
1532 cmdnode->callback = callback;
1533 cmdnode->callback_arg = callback_arg;
1535 /* Copy the incoming command to the buffer */
1536 memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size);
1538 /* Set command, clean result, move to buffer */
1539 cmdnode->cmdbuf->command = cpu_to_le16(command);
1540 cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size);
1541 cmdnode->cmdbuf->result = 0;
1543 lbs_deb_host("PREP_CMD: command 0x%04x\n", command);
1545 cmdnode->cmdwaitqwoken = 0;
1546 lbs_queue_cmd(priv, cmdnode);
1547 wake_up(&priv->waitq);
1549 done:
1550 return cmdnode;
1553 void lbs_cmd_async(struct lbs_private *priv, uint16_t command,
1554 struct cmd_header *in_cmd, int in_cmd_size)
1556 __lbs_cmd_async(priv, command, in_cmd, in_cmd_size,
1557 lbs_cmd_async_callback, 0);
1560 int __lbs_cmd(struct lbs_private *priv, uint16_t command,
1561 struct cmd_header *in_cmd, int in_cmd_size,
1562 int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
1563 unsigned long callback_arg)
1565 struct cmd_ctrl_node *cmdnode;
1566 unsigned long flags;
1567 int ret = 0;
1569 cmdnode = __lbs_cmd_async(priv, command, in_cmd, in_cmd_size,
1570 callback, callback_arg);
1571 if (IS_ERR(cmdnode)) {
1572 ret = PTR_ERR(cmdnode);
1573 goto done;
1576 might_sleep();
1579 * Be careful with signals here. A signal may be received as the system
1580 * goes into suspend or resume. We do not want this to interrupt the
1581 * command, so we perform an uninterruptible sleep.
1583 wait_event(cmdnode->cmdwait_q, cmdnode->cmdwaitqwoken);
1585 spin_lock_irqsave(&priv->driver_lock, flags);
1586 ret = cmdnode->result;
1587 if (ret)
1588 netdev_info(priv->dev, "PREP_CMD: command 0x%04x failed: %d\n",
1589 command, ret);
1591 __lbs_cleanup_and_insert_cmd(priv, cmdnode);
1592 spin_unlock_irqrestore(&priv->driver_lock, flags);
1594 done:
1595 return ret;
1597 EXPORT_SYMBOL_GPL(__lbs_cmd);