2 * TI LM363X Regulator Driver
4 * Copyright 2015 Texas Instruments
6 * Author: Milo Kim <milo.kim@ti.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/err.h>
14 #include <linux/kernel.h>
15 #include <linux/mfd/ti-lmu.h>
16 #include <linux/mfd/ti-lmu-register.h>
17 #include <linux/module.h>
19 #include <linux/of_gpio.h>
20 #include <linux/platform_device.h>
21 #include <linux/regulator/driver.h>
22 #include <linux/regulator/of_regulator.h>
23 #include <linux/slab.h>
26 #define LM3631_BOOST_VSEL_MAX 0x25
27 #define LM3631_LDO_VSEL_MAX 0x28
28 #define LM3631_CONT_VSEL_MAX 0x03
29 #define LM3631_VBOOST_MIN 4500000
30 #define LM3631_VCONT_MIN 1800000
31 #define LM3631_VLDO_MIN 4000000
32 #define ENABLE_TIME_USEC 1000
35 #define LM3632_BOOST_VSEL_MAX 0x26
36 #define LM3632_LDO_VSEL_MAX 0x29
37 #define LM3632_VBOOST_MIN 4500000
38 #define LM3632_VLDO_MIN 4000000
41 #define LM363X_STEP_50mV 50000
42 #define LM363X_STEP_500mV 500000
44 static const int ldo_cont_enable_time
[] = {
45 0, 2000, 5000, 10000, 20000, 50000, 100000, 200000,
48 static int lm363x_regulator_enable_time(struct regulator_dev
*rdev
)
50 enum lm363x_regulator_id id
= rdev_get_id(rdev
);
55 addr
= LM3631_REG_ENTIME_VCONT
;
56 mask
= LM3631_ENTIME_CONT_MASK
;
59 addr
= LM3631_REG_ENTIME_VOREF
;
60 mask
= LM3631_ENTIME_MASK
;
63 addr
= LM3631_REG_ENTIME_VPOS
;
64 mask
= LM3631_ENTIME_MASK
;
67 addr
= LM3631_REG_ENTIME_VNEG
;
68 mask
= LM3631_ENTIME_MASK
;
74 if (regmap_read(rdev
->regmap
, addr
, (unsigned int *)&val
))
77 val
= (val
& mask
) >> LM3631_ENTIME_SHIFT
;
79 if (id
== LM3631_LDO_CONT
)
80 return ldo_cont_enable_time
[val
];
82 return ENABLE_TIME_USEC
* val
;
85 static struct regulator_ops lm363x_boost_voltage_table_ops
= {
86 .list_voltage
= regulator_list_voltage_linear
,
87 .set_voltage_sel
= regulator_set_voltage_sel_regmap
,
88 .get_voltage_sel
= regulator_get_voltage_sel_regmap
,
91 static struct regulator_ops lm363x_regulator_voltage_table_ops
= {
92 .list_voltage
= regulator_list_voltage_linear
,
93 .set_voltage_sel
= regulator_set_voltage_sel_regmap
,
94 .get_voltage_sel
= regulator_get_voltage_sel_regmap
,
95 .enable
= regulator_enable_regmap
,
96 .disable
= regulator_disable_regmap
,
97 .is_enabled
= regulator_is_enabled_regmap
,
98 .enable_time
= lm363x_regulator_enable_time
,
101 static const struct regulator_desc lm363x_regulator_desc
[] = {
105 .of_match
= "vboost",
107 .ops
= &lm363x_boost_voltage_table_ops
,
108 .n_voltages
= LM3631_BOOST_VSEL_MAX
+ 1,
109 .min_uV
= LM3631_VBOOST_MIN
,
110 .uV_step
= LM363X_STEP_50mV
,
111 .type
= REGULATOR_VOLTAGE
,
112 .owner
= THIS_MODULE
,
113 .vsel_reg
= LM3631_REG_VOUT_BOOST
,
114 .vsel_mask
= LM3631_VOUT_MASK
,
119 .id
= LM3631_LDO_CONT
,
120 .ops
= &lm363x_regulator_voltage_table_ops
,
121 .n_voltages
= LM3631_CONT_VSEL_MAX
+ 1,
122 .min_uV
= LM3631_VCONT_MIN
,
123 .uV_step
= LM363X_STEP_500mV
,
124 .type
= REGULATOR_VOLTAGE
,
125 .owner
= THIS_MODULE
,
126 .vsel_reg
= LM3631_REG_VOUT_CONT
,
127 .vsel_mask
= LM3631_VOUT_CONT_MASK
,
128 .enable_reg
= LM3631_REG_LDO_CTRL2
,
129 .enable_mask
= LM3631_EN_CONT_MASK
,
134 .id
= LM3631_LDO_OREF
,
135 .ops
= &lm363x_regulator_voltage_table_ops
,
136 .n_voltages
= LM3631_LDO_VSEL_MAX
+ 1,
137 .min_uV
= LM3631_VLDO_MIN
,
138 .uV_step
= LM363X_STEP_50mV
,
139 .type
= REGULATOR_VOLTAGE
,
140 .owner
= THIS_MODULE
,
141 .vsel_reg
= LM3631_REG_VOUT_OREF
,
142 .vsel_mask
= LM3631_VOUT_MASK
,
143 .enable_reg
= LM3631_REG_LDO_CTRL1
,
144 .enable_mask
= LM3631_EN_OREF_MASK
,
149 .id
= LM3631_LDO_POS
,
150 .ops
= &lm363x_regulator_voltage_table_ops
,
151 .n_voltages
= LM3631_LDO_VSEL_MAX
+ 1,
152 .min_uV
= LM3631_VLDO_MIN
,
153 .uV_step
= LM363X_STEP_50mV
,
154 .type
= REGULATOR_VOLTAGE
,
155 .owner
= THIS_MODULE
,
156 .vsel_reg
= LM3631_REG_VOUT_POS
,
157 .vsel_mask
= LM3631_VOUT_MASK
,
158 .enable_reg
= LM3631_REG_LDO_CTRL1
,
159 .enable_mask
= LM3631_EN_VPOS_MASK
,
164 .id
= LM3631_LDO_NEG
,
165 .ops
= &lm363x_regulator_voltage_table_ops
,
166 .n_voltages
= LM3631_LDO_VSEL_MAX
+ 1,
167 .min_uV
= LM3631_VLDO_MIN
,
168 .uV_step
= LM363X_STEP_50mV
,
169 .type
= REGULATOR_VOLTAGE
,
170 .owner
= THIS_MODULE
,
171 .vsel_reg
= LM3631_REG_VOUT_NEG
,
172 .vsel_mask
= LM3631_VOUT_MASK
,
173 .enable_reg
= LM3631_REG_LDO_CTRL1
,
174 .enable_mask
= LM3631_EN_VNEG_MASK
,
179 .of_match
= "vboost",
181 .ops
= &lm363x_boost_voltage_table_ops
,
182 .n_voltages
= LM3632_BOOST_VSEL_MAX
+ 1,
183 .min_uV
= LM3632_VBOOST_MIN
,
184 .uV_step
= LM363X_STEP_50mV
,
185 .type
= REGULATOR_VOLTAGE
,
186 .owner
= THIS_MODULE
,
187 .vsel_reg
= LM3632_REG_VOUT_BOOST
,
188 .vsel_mask
= LM3632_VOUT_MASK
,
193 .id
= LM3632_LDO_POS
,
194 .ops
= &lm363x_regulator_voltage_table_ops
,
195 .n_voltages
= LM3632_LDO_VSEL_MAX
+ 1,
196 .min_uV
= LM3632_VLDO_MIN
,
197 .uV_step
= LM363X_STEP_50mV
,
198 .type
= REGULATOR_VOLTAGE
,
199 .owner
= THIS_MODULE
,
200 .vsel_reg
= LM3632_REG_VOUT_POS
,
201 .vsel_mask
= LM3632_VOUT_MASK
,
202 .enable_reg
= LM3632_REG_BIAS_CONFIG
,
203 .enable_mask
= LM3632_EN_VPOS_MASK
,
208 .id
= LM3632_LDO_NEG
,
209 .ops
= &lm363x_regulator_voltage_table_ops
,
210 .n_voltages
= LM3632_LDO_VSEL_MAX
+ 1,
211 .min_uV
= LM3632_VLDO_MIN
,
212 .uV_step
= LM363X_STEP_50mV
,
213 .type
= REGULATOR_VOLTAGE
,
214 .owner
= THIS_MODULE
,
215 .vsel_reg
= LM3632_REG_VOUT_NEG
,
216 .vsel_mask
= LM3632_VOUT_MASK
,
217 .enable_reg
= LM3632_REG_BIAS_CONFIG
,
218 .enable_mask
= LM3632_EN_VNEG_MASK
,
222 static int lm363x_regulator_of_get_enable_gpio(struct device_node
*np
, int id
)
225 * Check LCM_EN1/2_GPIO is configured.
226 * Those pins are used for enabling VPOS/VNEG LDOs.
230 return of_get_named_gpio(np
, "enable-gpios", 0);
232 return of_get_named_gpio(np
, "enable-gpios", 1);
238 static int lm363x_regulator_probe(struct platform_device
*pdev
)
240 struct ti_lmu
*lmu
= dev_get_drvdata(pdev
->dev
.parent
);
241 struct regmap
*regmap
= lmu
->regmap
;
242 struct regulator_config cfg
= { };
243 struct regulator_dev
*rdev
;
244 struct device
*dev
= &pdev
->dev
;
252 * LM3632 LDOs can be controlled by external pin.
253 * Register update is required if the pin is used.
255 ena_gpio
= lm363x_regulator_of_get_enable_gpio(dev
->of_node
, id
);
256 if (gpio_is_valid(ena_gpio
)) {
257 cfg
.ena_gpio
= ena_gpio
;
258 cfg
.ena_gpio_flags
= GPIOF_OUT_INIT_LOW
;
260 ret
= regmap_update_bits(regmap
, LM3632_REG_BIAS_CONFIG
,
264 dev_err(dev
, "External pin err: %d\n", ret
);
269 rdev
= devm_regulator_register(dev
, &lm363x_regulator_desc
[id
], &cfg
);
272 dev_err(dev
, "[%d] regulator register err: %d\n", id
, ret
);
279 static struct platform_driver lm363x_regulator_driver
= {
280 .probe
= lm363x_regulator_probe
,
282 .name
= "lm363x-regulator",
286 module_platform_driver(lm363x_regulator_driver
);
288 MODULE_DESCRIPTION("TI LM363X Regulator Driver");
289 MODULE_AUTHOR("Milo Kim");
290 MODULE_LICENSE("GPL v2");
291 MODULE_ALIAS("platform:lm363x-regulator");