drivers/rtc/rtc-m41t93.c

   1 /*
   2  *
   3  * Driver for ST M41T93 SPI RTC
   4  *
   5  * (c) 2010 Nikolaus Voss, Weinmann Medical GmbH
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/bcd.h>
  13 #include <linux/kernel.h>
  14 #include <linux/module.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/rtc.h>
  17 #include <linux/spi/spi.h>
  18
  19 #define M41T93_REG_SSEC                 0
  20 #define M41T93_REG_ST_SEC               1
  21 #define M41T93_REG_MIN                  2
  22 #define M41T93_REG_CENT_HOUR            3
  23 #define M41T93_REG_WDAY                 4
  24 #define M41T93_REG_DAY                  5
  25 #define M41T93_REG_MON                  6
  26 #define M41T93_REG_YEAR                 7
  27
  28
  29 #define M41T93_REG_ALM_HOUR_HT          0xc
  30 #define M41T93_REG_FLAGS                0xf
  31
  32 #define M41T93_FLAG_ST                  (1 << 7)
  33 #define M41T93_FLAG_OF                  (1 << 2)
  34 #define M41T93_FLAG_BL                  (1 << 4)
  35 #define M41T93_FLAG_HT                  (1 << 6)
  36
  37 static inline int m41t93_set_reg(struct spi_device *spi, u8 addr, u8 data)
  38 {
  39         u8 buf[2];
  40
  41         /* MSB must be '1' to write */
  42         buf[0] = addr | 0x80;
  43         buf[1] = data;
  44
  45         return spi_write(spi, buf, sizeof(buf));
  46 }
  47
  48 static int m41t93_set_time(struct device *dev, struct rtc_time *tm)
  49 {
  50         struct spi_device *spi = to_spi_device(dev);
  51         int tmp;
  52         u8 buf[9] = {0x80};        /* write cmd + 8 data bytes */
  53         u8 * const data = &buf[1]; /* ptr to first data byte */
  54
  55         dev_dbg(dev, "%s secs=%d, mins=%d, "
  56                 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
  57                 "write", tm->tm_sec, tm->tm_min,
  58                 tm->tm_hour, tm->tm_mday,
  59                 tm->tm_mon, tm->tm_year, tm->tm_wday);
  60
  61         if (tm->tm_year < 100) {
  62                 dev_warn(&spi->dev, "unsupported date (before 2000-01-01).\n");
  63                 return -EINVAL;
  64         }
  65
  66         tmp = spi_w8r8(spi, M41T93_REG_FLAGS);
  67         if (tmp < 0)
  68                 return tmp;
  69
  70         if (tmp & M41T93_FLAG_OF) {
  71                 dev_warn(&spi->dev, "OF bit is set, resetting.\n");
  72                 m41t93_set_reg(spi, M41T93_REG_FLAGS, tmp & ~M41T93_FLAG_OF);
  73
  74                 tmp = spi_w8r8(spi, M41T93_REG_FLAGS);
  75                 if (tmp < 0) {
  76                         return tmp;
  77                 } else if (tmp & M41T93_FLAG_OF) {
  78                         /* OF cannot be immediately reset: oscillator has to be
  79                          * restarted. */
  80                         u8 reset_osc = buf[M41T93_REG_ST_SEC] | M41T93_FLAG_ST;
  81
  82                         dev_warn(&spi->dev,
  83                                  "OF bit is still set, kickstarting clock.\n");
  84                         m41t93_set_reg(spi, M41T93_REG_ST_SEC, reset_osc);
  85                         reset_osc &= ~M41T93_FLAG_ST;
  86                         m41t93_set_reg(spi, M41T93_REG_ST_SEC, reset_osc);
  87                 }
  88         }
  89
  90         data[M41T93_REG_SSEC]           = 0;
  91         data[M41T93_REG_ST_SEC]         = bin2bcd(tm->tm_sec);
  92         data[M41T93_REG_MIN]            = bin2bcd(tm->tm_min);
  93         data[M41T93_REG_CENT_HOUR]      = bin2bcd(tm->tm_hour) |
  94                                                 ((tm->tm_year/100-1) << 6);
  95         data[M41T93_REG_DAY]            = bin2bcd(tm->tm_mday);
  96         data[M41T93_REG_WDAY]           = bin2bcd(tm->tm_wday + 1);
  97         data[M41T93_REG_MON]            = bin2bcd(tm->tm_mon + 1);
  98         data[M41T93_REG_YEAR]           = bin2bcd(tm->tm_year % 100);
  99
 100         return spi_write(spi, buf, sizeof(buf));
 101 }
 102
 103
 104 static int m41t93_get_time(struct device *dev, struct rtc_time *tm)
 105 {
 106         struct spi_device *spi = to_spi_device(dev);
 107         const u8 start_addr = 0;
 108         u8 buf[8];
 109         int century_after_1900;
 110         int tmp;
 111         int ret = 0;
 112
 113         /* Check status of clock. Two states must be considered:
 114            1. halt bit (HT) is set: the clock is running but update of readout
 115               registers has been disabled due to power failure. This is normal
 116               case after poweron. Time is valid after resetting HT bit.
 117            2. oscillator fail bit (OF) is set: time is invalid.
 118         */
 119         tmp = spi_w8r8(spi, M41T93_REG_ALM_HOUR_HT);
 120         if (tmp < 0)
 121                 return tmp;
 122
 123         if (tmp & M41T93_FLAG_HT) {
 124                 dev_dbg(&spi->dev, "HT bit is set, reenable clock update.\n");
 125                 m41t93_set_reg(spi, M41T93_REG_ALM_HOUR_HT,
 126                                tmp & ~M41T93_FLAG_HT);
 127         }
 128
 129         tmp = spi_w8r8(spi, M41T93_REG_FLAGS);
 130         if (tmp < 0)
 131                 return tmp;
 132
 133         if (tmp & M41T93_FLAG_OF) {
 134                 ret = -EINVAL;
 135                 dev_warn(&spi->dev, "OF bit is set, write time to restart.\n");
 136         }
 137
 138         if (tmp & M41T93_FLAG_BL)
 139                 dev_warn(&spi->dev, "BL bit is set, replace battery.\n");
 140
 141         /* read actual time/date */
 142         tmp = spi_write_then_read(spi, &start_addr, 1, buf, sizeof(buf));
 143         if (tmp < 0)
 144                 return tmp;
 145
 146         tm->tm_sec      = bcd2bin(buf[M41T93_REG_ST_SEC]);
 147         tm->tm_min      = bcd2bin(buf[M41T93_REG_MIN]);
 148         tm->tm_hour     = bcd2bin(buf[M41T93_REG_CENT_HOUR] & 0x3f);
 149         tm->tm_mday     = bcd2bin(buf[M41T93_REG_DAY]);
 150         tm->tm_mon      = bcd2bin(buf[M41T93_REG_MON]) - 1;
 151         tm->tm_wday     = bcd2bin(buf[M41T93_REG_WDAY] & 0x0f) - 1;
 152
 153         century_after_1900 = (buf[M41T93_REG_CENT_HOUR] >> 6) + 1;
 154         tm->tm_year = bcd2bin(buf[M41T93_REG_YEAR]) + century_after_1900 * 100;
 155
 156         dev_dbg(dev, "%s secs=%d, mins=%d, "
 157                 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
 158                 "read", tm->tm_sec, tm->tm_min,
 159                 tm->tm_hour, tm->tm_mday,
 160                 tm->tm_mon, tm->tm_year, tm->tm_wday);
 161
 162         return ret < 0 ? ret : rtc_valid_tm(tm);
 163 }
 164
 165
 166 static const struct rtc_class_ops m41t93_rtc_ops = {
 167         .read_time      = m41t93_get_time,
 168         .set_time       = m41t93_set_time,
 169 };
 170
 171 static struct spi_driver m41t93_driver;
 172
 173 static int m41t93_probe(struct spi_device *spi)
 174 {
 175         struct rtc_device *rtc;
 176         int res;
 177
 178         spi->bits_per_word = 8;
 179         spi_setup(spi);
 180
 181         res = spi_w8r8(spi, M41T93_REG_WDAY);
 182         if (res < 0 || (res & 0xf8) != 0) {
 183                 dev_err(&spi->dev, "not found 0x%x.\n", res);
 184                 return -ENODEV;
 185         }
 186
 187         rtc = devm_rtc_device_register(&spi->dev, m41t93_driver.driver.name,
 188                                         &m41t93_rtc_ops, THIS_MODULE);
 189         if (IS_ERR(rtc))
 190                 return PTR_ERR(rtc);
 191
 192         spi_set_drvdata(spi, rtc);
 193
 194         return 0;
 195 }
 196
 197 static struct spi_driver m41t93_driver = {
 198         .driver = {
 199                 .name   = "rtc-m41t93",
 200         },
 201         .probe  = m41t93_probe,
 202 };
 203
 204 module_spi_driver(m41t93_driver);
 205
 206 MODULE_AUTHOR("Nikolaus Voss <n.voss@weinmann.de>");
 207 MODULE_DESCRIPTION("Driver for ST M41T93 SPI RTC");
 208 MODULE_LICENSE("GPL");
 209 MODULE_ALIAS("spi:rtc-m41t93");