?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.16.11
[linux/fpc-iii.git] / drivers / scsi / aha1542.c
blob124217927c4af267554733df8cad79afe9cc7bee
1 /*
2 * Driver for Adaptec AHA-1542 SCSI host adapters
3 *
4 * Copyright (C) 1992 Tommy Thorn
5 * Copyright (C) 1993, 1994, 1995 Eric Youngdale
6 * Copyright (C) 2015 Ondrej Zary
7 */
8
9 #include <linux/module.h>
10 #include <linux/interrupt.h>
11 #include <linux/kernel.h>
12 #include <linux/types.h>
13 #include <linux/string.h>
14 #include <linux/delay.h>
15 #include <linux/init.h>
16 #include <linux/spinlock.h>
17 #include <linux/isa.h>
18 #include <linux/pnp.h>
19 #include <linux/slab.h>
20 #include <linux/io.h>
21 #include <asm/dma.h>
22 #include <scsi/scsi_cmnd.h>
23 #include <scsi/scsi_device.h>
24 #include <scsi/scsi_host.h>
25 #include "aha1542.h"
26
27 #define MAXBOARDS 4
28
29 static bool isapnp = 1;
30 module_param(isapnp, bool, 0);
31 MODULE_PARM_DESC(isapnp, "enable PnP support (default=1)");
32
33 static int io[MAXBOARDS] = { 0x330, 0x334, 0, 0 };
34 module_param_hw_array(io, int, ioport, NULL, 0);
35 MODULE_PARM_DESC(io, "base IO address of controller (0x130,0x134,0x230,0x234,0x330,0x334, default=0x330,0x334)");
36
37 /* time AHA spends on the AT-bus during data transfer */
38 static int bus_on[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 11us */
39 module_param_array(bus_on, int, NULL, 0);
40 MODULE_PARM_DESC(bus_on, "bus on time [us] (2-15, default=-1 [HW default: 11])");
41
42 /* time AHA spends off the bus (not to monopolize it) during data transfer */
43 static int bus_off[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 4us */
44 module_param_array(bus_off, int, NULL, 0);
45 MODULE_PARM_DESC(bus_off, "bus off time [us] (1-64, default=-1 [HW default: 4])");
46
47 /* default is jumper selected (J1 on 1542A), factory default = 5 MB/s */
48 static int dma_speed[MAXBOARDS] = { -1, -1, -1, -1 };
49 module_param_array(dma_speed, int, NULL, 0);
50 MODULE_PARM_DESC(dma_speed, "DMA speed [MB/s] (5,6,7,8,10, default=-1 [by jumper])");
51
52 #define BIOS_TRANSLATION_6432 1 /* Default case these days */
53 #define BIOS_TRANSLATION_25563 2 /* Big disk case */
54
55 struct aha1542_hostdata {
56 /* This will effectively start both of them at the first mailbox */
57 int bios_translation; /* Mapping bios uses - for compatibility */
58 int aha1542_last_mbi_used;
59 int aha1542_last_mbo_used;
60 struct scsi_cmnd *int_cmds[AHA1542_MAILBOXES];
61 struct mailbox mb[2 * AHA1542_MAILBOXES];
62 struct ccb ccb[AHA1542_MAILBOXES];
63 };
64
65 static inline void aha1542_intr_reset(u16 base)
66 {
67 outb(IRST, CONTROL(base));
68 }
69
70 static inline bool wait_mask(u16 port, u8 mask, u8 allof, u8 noneof, int timeout)
71 {
72 bool delayed = true;
73
74 if (timeout == 0) {
75 timeout = 3000000;
76 delayed = false;
77 }
78
79 while (1) {
80 u8 bits = inb(port) & mask;
81 if ((bits & allof) == allof && ((bits & noneof) == 0))
82 break;
83 if (delayed)
84 mdelay(1);
85 if (--timeout == 0)
86 return false;
87 }
88
89 return true;
90 }
91
92 static int aha1542_outb(unsigned int base, u8 val)
93 {
94 if (!wait_mask(STATUS(base), CDF, 0, CDF, 0))
95 return 1;
96 outb(val, DATA(base));
97
98 return 0;
99 }
100
101 static int aha1542_out(unsigned int base, u8 *buf, int len)
102 {
103 while (len--) {
104 if (!wait_mask(STATUS(base), CDF, 0, CDF, 0))
105 return 1;
106 outb(*buf++, DATA(base));
107 }
108 if (!wait_mask(INTRFLAGS(base), INTRMASK, HACC, 0, 0))
109 return 1;
110
111 return 0;
112 }
113
114 /* Only used at boot time, so we do not need to worry about latency as much
115 here */
116
117 static int aha1542_in(unsigned int base, u8 *buf, int len, int timeout)
118 {
119 while (len--) {
120 if (!wait_mask(STATUS(base), DF, DF, 0, timeout))
121 return 1;
122 *buf++ = inb(DATA(base));
123 }
124 return 0;
125 }
126
127 static int makecode(unsigned hosterr, unsigned scsierr)
128 {
129 switch (hosterr) {
130 case 0x0:
131 case 0xa: /* Linked command complete without error and linked normally */
132 case 0xb: /* Linked command complete without error, interrupt generated */
133 hosterr = 0;
134 break;
135
136 case 0x11: /* Selection time out-The initiator selection or target
137 reselection was not complete within the SCSI Time out period */
138 hosterr = DID_TIME_OUT;
139 break;
140
141 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
142 than was allocated by the Data Length field or the sum of the
143 Scatter / Gather Data Length fields. */
144
145 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
146
147 case 0x15: /* MBO command was not 00, 01 or 02-The first byte of the CB was
148 invalid. This usually indicates a software failure. */
149
150 case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid.
151 This usually indicates a software failure. */
152
153 case 0x17: /* Linked CCB does not have the same LUN-A subsequent CCB of a set
154 of linked CCB's does not specify the same logical unit number as
155 the first. */
156 case 0x18: /* Invalid Target Direction received from Host-The direction of a
157 Target Mode CCB was invalid. */
158
159 case 0x19: /* Duplicate CCB Received in Target Mode-More than once CCB was
160 received to service data transfer between the same target LUN
161 and initiator SCSI ID in the same direction. */
162
163 case 0x1a: /* Invalid CCB or Segment List Parameter-A segment list with a zero
164 length segment or invalid segment list boundaries was received.
165 A CCB parameter was invalid. */
166 #ifdef DEBUG
167 printk("Aha1542: %x %x\n", hosterr, scsierr);
168 #endif
169 hosterr = DID_ERROR; /* Couldn't find any better */
170 break;
171
172 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
173 phase sequence was requested by the target. The host adapter
174 will generate a SCSI Reset Condition, notifying the host with
175 a SCRD interrupt */
176 hosterr = DID_RESET;
177 break;
178 default:
179 printk(KERN_ERR "aha1542: makecode: unknown hoststatus %x\n", hosterr);
180 break;
181 }
182 return scsierr | (hosterr << 16);
183 }
184
185 static int aha1542_test_port(struct Scsi_Host *sh)
186 {
187 u8 inquiry_result[4];
188 int i;
189
190 /* Quick and dirty test for presence of the card. */
191 if (inb(STATUS(sh->io_port)) == 0xff)
192 return 0;
193
194 /* Reset the adapter. I ought to make a hard reset, but it's not really necessary */
195
196 /* In case some other card was probing here, reset interrupts */
197 aha1542_intr_reset(sh->io_port); /* reset interrupts, so they don't block */
198
199 outb(SRST | IRST /*|SCRST */ , CONTROL(sh->io_port));
200
201 mdelay(20); /* Wait a little bit for things to settle down. */
202
203 /* Expect INIT and IDLE, any of the others are bad */
204 if (!wait_mask(STATUS(sh->io_port), STATMASK, INIT | IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0))
205 return 0;
206
207 /* Shouldn't have generated any interrupts during reset */
208 if (inb(INTRFLAGS(sh->io_port)) & INTRMASK)
209 return 0;
210
211 /* Perform a host adapter inquiry instead so we do not need to set
212 up the mailboxes ahead of time */
213
214 aha1542_outb(sh->io_port, CMD_INQUIRY);
215
216 for (i = 0; i < 4; i++) {
217 if (!wait_mask(STATUS(sh->io_port), DF, DF, 0, 0))
218 return 0;
219 inquiry_result[i] = inb(DATA(sh->io_port));
220 }
221
222 /* Reading port should reset DF */
223 if (inb(STATUS(sh->io_port)) & DF)
224 return 0;
225
226 /* When HACC, command is completed, and we're though testing */
227 if (!wait_mask(INTRFLAGS(sh->io_port), HACC, HACC, 0, 0))
228 return 0;
229
230 /* Clear interrupts */
231 outb(IRST, CONTROL(sh->io_port));
232
233 return 1;
234 }
235
236 static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
237 {
238 struct Scsi_Host *sh = dev_id;
239 struct aha1542_hostdata *aha1542 = shost_priv(sh);
240 void (*my_done)(struct scsi_cmnd *) = NULL;
241 int errstatus, mbi, mbo, mbistatus;
242 int number_serviced;
243 unsigned long flags;
244 struct scsi_cmnd *tmp_cmd;
245 int flag;
246 struct mailbox *mb = aha1542->mb;
247 struct ccb *ccb = aha1542->ccb;
248
249 #ifdef DEBUG
250 {
251 flag = inb(INTRFLAGS(sh->io_port));
252 shost_printk(KERN_DEBUG, sh, "aha1542_intr_handle: ");
253 if (!(flag & ANYINTR))
254 printk("no interrupt?");
255 if (flag & MBIF)
256 printk("MBIF ");
257 if (flag & MBOA)
258 printk("MBOF ");
259 if (flag & HACC)
260 printk("HACC ");
261 if (flag & SCRD)
262 printk("SCRD ");
263 printk("status %02x\n", inb(STATUS(sh->io_port)));
264 };
265 #endif
266 number_serviced = 0;
267
268 spin_lock_irqsave(sh->host_lock, flags);
269 while (1) {
270 flag = inb(INTRFLAGS(sh->io_port));
271
272 /* Check for unusual interrupts. If any of these happen, we should
273 probably do something special, but for now just printing a message
274 is sufficient. A SCSI reset detected is something that we really
275 need to deal with in some way. */
276 if (flag & ~MBIF) {
277 if (flag & MBOA)
278 printk("MBOF ");
279 if (flag & HACC)
280 printk("HACC ");
281 if (flag & SCRD)
282 printk("SCRD ");
283 }
284 aha1542_intr_reset(sh->io_port);
285
286 mbi = aha1542->aha1542_last_mbi_used + 1;
287 if (mbi >= 2 * AHA1542_MAILBOXES)
288 mbi = AHA1542_MAILBOXES;
289
290 do {
291 if (mb[mbi].status != 0)
292 break;
293 mbi++;
294 if (mbi >= 2 * AHA1542_MAILBOXES)
295 mbi = AHA1542_MAILBOXES;
296 } while (mbi != aha1542->aha1542_last_mbi_used);
297
298 if (mb[mbi].status == 0) {
299 spin_unlock_irqrestore(sh->host_lock, flags);
300 /* Hmm, no mail. Must have read it the last time around */
301 if (!number_serviced)
302 shost_printk(KERN_WARNING, sh, "interrupt received, but no mail.\n");
303 return IRQ_HANDLED;
304 };
305
306 mbo = (scsi2int(mb[mbi].ccbptr) - (isa_virt_to_bus(&ccb[0]))) / sizeof(struct ccb);
307 mbistatus = mb[mbi].status;
308 mb[mbi].status = 0;
309 aha1542->aha1542_last_mbi_used = mbi;
310
311 #ifdef DEBUG
312 if (ccb[mbo].tarstat | ccb[mbo].hastat)
313 shost_printk(KERN_DEBUG, sh, "aha1542_command: returning %x (status %d)\n",
314 ccb[mbo].tarstat + ((int) ccb[mbo].hastat << 16), mb[mbi].status);
315 #endif
316
317 if (mbistatus == 3)
318 continue; /* Aborted command not found */
319
320 #ifdef DEBUG
321 shost_printk(KERN_DEBUG, sh, "...done %d %d\n", mbo, mbi);
322 #endif
323
324 tmp_cmd = aha1542->int_cmds[mbo];
325
326 if (!tmp_cmd || !tmp_cmd->scsi_done) {
327 spin_unlock_irqrestore(sh->host_lock, flags);
328 shost_printk(KERN_WARNING, sh, "Unexpected interrupt\n");
329 shost_printk(KERN_WARNING, sh, "tarstat=%x, hastat=%x idlun=%x ccb#=%d\n", ccb[mbo].tarstat,
330 ccb[mbo].hastat, ccb[mbo].idlun, mbo);
331 return IRQ_HANDLED;
332 }
333 my_done = tmp_cmd->scsi_done;
334 kfree(tmp_cmd->host_scribble);
335 tmp_cmd->host_scribble = NULL;
336 /* Fetch the sense data, and tuck it away, in the required slot. The
337 Adaptec automatically fetches it, and there is no guarantee that
338 we will still have it in the cdb when we come back */
339 if (ccb[mbo].tarstat == 2)
340 memcpy(tmp_cmd->sense_buffer, &ccb[mbo].cdb[ccb[mbo].cdblen],
341 SCSI_SENSE_BUFFERSIZE);
342
343
344 /* is there mail :-) */
345
346 /* more error checking left out here */
347 if (mbistatus != 1)
348 /* This is surely wrong, but I don't know what's right */
349 errstatus = makecode(ccb[mbo].hastat, ccb[mbo].tarstat);
350 else
351 errstatus = 0;
352
353 #ifdef DEBUG
354 if (errstatus)
355 shost_printk(KERN_DEBUG, sh, "(aha1542 error:%x %x %x) ", errstatus,
356 ccb[mbo].hastat, ccb[mbo].tarstat);
357 if (ccb[mbo].tarstat == 2)
358 print_hex_dump_bytes("sense: ", DUMP_PREFIX_NONE, &ccb[mbo].cdb[ccb[mbo].cdblen], 12);
359 if (errstatus)
360 printk("aha1542_intr_handle: returning %6x\n", errstatus);
361 #endif
362 tmp_cmd->result = errstatus;
363 aha1542->int_cmds[mbo] = NULL; /* This effectively frees up the mailbox slot, as
364 far as queuecommand is concerned */
365 my_done(tmp_cmd);
366 number_serviced++;
367 };
368 }
369
370 static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
371 {
372 struct aha1542_hostdata *aha1542 = shost_priv(sh);
373 u8 direction;
374 u8 target = cmd->device->id;
375 u8 lun = cmd->device->lun;
376 unsigned long flags;
377 int bufflen = scsi_bufflen(cmd);
378 int mbo, sg_count;
379 struct mailbox *mb = aha1542->mb;
380 struct ccb *ccb = aha1542->ccb;
381 struct chain *cptr;
382
383 if (*cmd->cmnd == REQUEST_SENSE) {
384 /* Don't do the command - we have the sense data already */
385 cmd->result = 0;
386 cmd->scsi_done(cmd);
387 return 0;
388 }
389 #ifdef DEBUG
390 {
391 int i = -1;
392 if (*cmd->cmnd == READ_10 || *cmd->cmnd == WRITE_10)
393 i = xscsi2int(cmd->cmnd + 2);
394 else if (*cmd->cmnd == READ_6 || *cmd->cmnd == WRITE_6)
395 i = scsi2int(cmd->cmnd + 2);
396 shost_printk(KERN_DEBUG, sh, "aha1542_queuecommand: dev %d cmd %02x pos %d len %d",
397 target, *cmd->cmnd, i, bufflen);
398 print_hex_dump_bytes("command: ", DUMP_PREFIX_NONE, cmd->cmnd, cmd->cmd_len);
399 }
400 #endif
401 if (bufflen) { /* allocate memory before taking host_lock */
402 sg_count = scsi_sg_count(cmd);
403 cptr = kmalloc(sizeof(*cptr) * sg_count, GFP_KERNEL | GFP_DMA);
404 if (!cptr)
405 return SCSI_MLQUEUE_HOST_BUSY;
406 } else {
407 sg_count = 0;
408 cptr = NULL;
409 }
410
411 /* Use the outgoing mailboxes in a round-robin fashion, because this
412 is how the host adapter will scan for them */
413
414 spin_lock_irqsave(sh->host_lock, flags);
415 mbo = aha1542->aha1542_last_mbo_used + 1;
416 if (mbo >= AHA1542_MAILBOXES)
417 mbo = 0;
418
419 do {
420 if (mb[mbo].status == 0 && aha1542->int_cmds[mbo] == NULL)
421 break;
422 mbo++;
423 if (mbo >= AHA1542_MAILBOXES)
424 mbo = 0;
425 } while (mbo != aha1542->aha1542_last_mbo_used);
426
427 if (mb[mbo].status || aha1542->int_cmds[mbo])
428 panic("Unable to find empty mailbox for aha1542.\n");
429
430 aha1542->int_cmds[mbo] = cmd; /* This will effectively prevent someone else from
431 screwing with this cdb. */
432
433 aha1542->aha1542_last_mbo_used = mbo;
434
435 #ifdef DEBUG
436 shost_printk(KERN_DEBUG, sh, "Sending command (%d %p)...", mbo, cmd->scsi_done);
437 #endif
438
439 any2scsi(mb[mbo].ccbptr, isa_virt_to_bus(&ccb[mbo])); /* This gets trashed for some reason */
440
441 memset(&ccb[mbo], 0, sizeof(struct ccb));
442
443 ccb[mbo].cdblen = cmd->cmd_len;
444
445 direction = 0;
446 if (*cmd->cmnd == READ_10 || *cmd->cmnd == READ_6)
447 direction = 8;
448 else if (*cmd->cmnd == WRITE_10 || *cmd->cmnd == WRITE_6)
449 direction = 16;
450
451 memcpy(ccb[mbo].cdb, cmd->cmnd, ccb[mbo].cdblen);
452
453 if (bufflen) {
454 struct scatterlist *sg;
455 int i;
456
457 ccb[mbo].op = 2; /* SCSI Initiator Command w/scatter-gather */
458 cmd->host_scribble = (void *)cptr;
459 scsi_for_each_sg(cmd, sg, sg_count, i) {
460 any2scsi(cptr[i].dataptr, isa_page_to_bus(sg_page(sg))
461 + sg->offset);
462 any2scsi(cptr[i].datalen, sg->length);
463 };
464 any2scsi(ccb[mbo].datalen, sg_count * sizeof(struct chain));
465 any2scsi(ccb[mbo].dataptr, isa_virt_to_bus(cptr));
466 #ifdef DEBUG
467 shost_printk(KERN_DEBUG, sh, "cptr %p: ", cptr);
468 print_hex_dump_bytes("cptr: ", DUMP_PREFIX_NONE, cptr, 18);
469 #endif
470 } else {
471 ccb[mbo].op = 0; /* SCSI Initiator Command */
472 cmd->host_scribble = NULL;
473 any2scsi(ccb[mbo].datalen, 0);
474 any2scsi(ccb[mbo].dataptr, 0);
475 };
476 ccb[mbo].idlun = (target & 7) << 5 | direction | (lun & 7); /*SCSI Target Id */
477 ccb[mbo].rsalen = 16;
478 ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0;
479 ccb[mbo].commlinkid = 0;
480
481 #ifdef DEBUG
482 print_hex_dump_bytes("sending: ", DUMP_PREFIX_NONE, &ccb[mbo], sizeof(ccb[mbo]) - 10);
483 printk("aha1542_queuecommand: now waiting for interrupt ");
484 #endif
485 mb[mbo].status = 1;
486 aha1542_outb(cmd->device->host->io_port, CMD_START_SCSI);
487 spin_unlock_irqrestore(sh->host_lock, flags);
488
489 return 0;
490 }
491
492 /* Initialize mailboxes */
493 static void setup_mailboxes(struct Scsi_Host *sh)
494 {
495 struct aha1542_hostdata *aha1542 = shost_priv(sh);
496 int i;
497 struct mailbox *mb = aha1542->mb;
498 struct ccb *ccb = aha1542->ccb;
499
500 u8 mb_cmd[5] = { CMD_MBINIT, AHA1542_MAILBOXES, 0, 0, 0};
501
502 for (i = 0; i < AHA1542_MAILBOXES; i++) {
503 mb[i].status = mb[AHA1542_MAILBOXES + i].status = 0;
504 any2scsi(mb[i].ccbptr, isa_virt_to_bus(&ccb[i]));
505 };
506 aha1542_intr_reset(sh->io_port); /* reset interrupts, so they don't block */
507 any2scsi((mb_cmd + 2), isa_virt_to_bus(mb));
508 if (aha1542_out(sh->io_port, mb_cmd, 5))
509 shost_printk(KERN_ERR, sh, "failed setting up mailboxes\n");
510 aha1542_intr_reset(sh->io_port);
511 }
512
513 static int aha1542_getconfig(struct Scsi_Host *sh)
514 {
515 u8 inquiry_result[3];
516 int i;
517 i = inb(STATUS(sh->io_port));
518 if (i & DF) {
519 i = inb(DATA(sh->io_port));
520 };
521 aha1542_outb(sh->io_port, CMD_RETCONF);
522 aha1542_in(sh->io_port, inquiry_result, 3, 0);
523 if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
524 shost_printk(KERN_ERR, sh, "error querying board settings\n");
525 aha1542_intr_reset(sh->io_port);
526 switch (inquiry_result[0]) {
527 case 0x80:
528 sh->dma_channel = 7;
529 break;
530 case 0x40:
531 sh->dma_channel = 6;
532 break;
533 case 0x20:
534 sh->dma_channel = 5;
535 break;
536 case 0x01:
537 sh->dma_channel = 0;
538 break;
539 case 0:
540 /* This means that the adapter, although Adaptec 1542 compatible, doesn't use a DMA channel.
541 Currently only aware of the BusLogic BT-445S VL-Bus adapter which needs this. */
542 sh->dma_channel = 0xFF;
543 break;
544 default:
545 shost_printk(KERN_ERR, sh, "Unable to determine DMA channel.\n");
546 return -1;
547 };
548 switch (inquiry_result[1]) {
549 case 0x40:
550 sh->irq = 15;
551 break;
552 case 0x20:
553 sh->irq = 14;
554 break;
555 case 0x8:
556 sh->irq = 12;
557 break;
558 case 0x4:
559 sh->irq = 11;
560 break;
561 case 0x2:
562 sh->irq = 10;
563 break;
564 case 0x1:
565 sh->irq = 9;
566 break;
567 default:
568 shost_printk(KERN_ERR, sh, "Unable to determine IRQ level.\n");
569 return -1;
570 };
571 sh->this_id = inquiry_result[2] & 7;
572 return 0;
573 }
574
575 /* This function should only be called for 1542C boards - we can detect
576 the special firmware settings and unlock the board */
577
578 static int aha1542_mbenable(struct Scsi_Host *sh)
579 {
580 static u8 mbenable_cmd[3];
581 static u8 mbenable_result[2];
582 int retval;
583
584 retval = BIOS_TRANSLATION_6432;
585
586 aha1542_outb(sh->io_port, CMD_EXTBIOS);
587 if (aha1542_in(sh->io_port, mbenable_result, 2, 100))
588 return retval;
589 if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 100))
590 goto fail;
591 aha1542_intr_reset(sh->io_port);
592
593 if ((mbenable_result[0] & 0x08) || mbenable_result[1]) {
594 mbenable_cmd[0] = CMD_MBENABLE;
595 mbenable_cmd[1] = 0;
596 mbenable_cmd[2] = mbenable_result[1];
597
598 if ((mbenable_result[0] & 0x08) && (mbenable_result[1] & 0x03))
599 retval = BIOS_TRANSLATION_25563;
600
601 if (aha1542_out(sh->io_port, mbenable_cmd, 3))
602 goto fail;
603 };
604 while (0) {
605 fail:
606 shost_printk(KERN_ERR, sh, "Mailbox init failed\n");
607 }
608 aha1542_intr_reset(sh->io_port);
609 return retval;
610 }
611
612 /* Query the board to find out if it is a 1542 or a 1740, or whatever. */
613 static int aha1542_query(struct Scsi_Host *sh)
614 {
615 struct aha1542_hostdata *aha1542 = shost_priv(sh);
616 u8 inquiry_result[4];
617 int i;
618 i = inb(STATUS(sh->io_port));
619 if (i & DF) {
620 i = inb(DATA(sh->io_port));
621 };
622 aha1542_outb(sh->io_port, CMD_INQUIRY);
623 aha1542_in(sh->io_port, inquiry_result, 4, 0);
624 if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
625 shost_printk(KERN_ERR, sh, "error querying card type\n");
626 aha1542_intr_reset(sh->io_port);
627
628 aha1542->bios_translation = BIOS_TRANSLATION_6432; /* Default case */
629
630 /* For an AHA1740 series board, we ignore the board since there is a
631 hardware bug which can lead to wrong blocks being returned if the board
632 is operating in the 1542 emulation mode. Since there is an extended mode
633 driver, we simply ignore the board and let the 1740 driver pick it up.
634 */
635
636 if (inquiry_result[0] == 0x43) {
637 shost_printk(KERN_INFO, sh, "Emulation mode not supported for AHA-1740 hardware, use aha1740 driver instead.\n");
638 return 1;
639 };
640
641 /* Always call this - boards that do not support extended bios translation
642 will ignore the command, and we will set the proper default */
643
644 aha1542->bios_translation = aha1542_mbenable(sh);
645
646 return 0;
647 }
648
649 static u8 dma_speed_hw(int dma_speed)
650 {
651 switch (dma_speed) {
652 case 5:
653 return 0x00;
654 case 6:
655 return 0x04;
656 case 7:
657 return 0x01;
658 case 8:
659 return 0x02;
660 case 10:
661 return 0x03;
662 }
663
664 return 0xff; /* invalid */
665 }
666
667 /* Set the Bus on/off-times as not to ruin floppy performance */
668 static void aha1542_set_bus_times(struct Scsi_Host *sh, int bus_on, int bus_off, int dma_speed)
669 {
670 if (bus_on > 0) {
671 u8 oncmd[] = { CMD_BUSON_TIME, clamp(bus_on, 2, 15) };
672
673 aha1542_intr_reset(sh->io_port);
674 if (aha1542_out(sh->io_port, oncmd, 2))
675 goto fail;
676 }
677
678 if (bus_off > 0) {
679 u8 offcmd[] = { CMD_BUSOFF_TIME, clamp(bus_off, 1, 64) };
680
681 aha1542_intr_reset(sh->io_port);
682 if (aha1542_out(sh->io_port, offcmd, 2))
683 goto fail;
684 }
685
686 if (dma_speed_hw(dma_speed) != 0xff) {
687 u8 dmacmd[] = { CMD_DMASPEED, dma_speed_hw(dma_speed) };
688
689 aha1542_intr_reset(sh->io_port);
690 if (aha1542_out(sh->io_port, dmacmd, 2))
691 goto fail;
692 }
693 aha1542_intr_reset(sh->io_port);
694 return;
695 fail:
696 shost_printk(KERN_ERR, sh, "setting bus on/off-time failed\n");
697 aha1542_intr_reset(sh->io_port);
698 }
699
700 /* return non-zero on detection */
701 static struct Scsi_Host *aha1542_hw_init(struct scsi_host_template *tpnt, struct device *pdev, int indx)
702 {
703 unsigned int base_io = io[indx];
704 struct Scsi_Host *sh;
705 struct aha1542_hostdata *aha1542;
706 char dma_info[] = "no DMA";
707
708 if (base_io == 0)
709 return NULL;
710
711 if (!request_region(base_io, AHA1542_REGION_SIZE, "aha1542"))
712 return NULL;
713
714 sh = scsi_host_alloc(tpnt, sizeof(struct aha1542_hostdata));
715 if (!sh)
716 goto release;
717 aha1542 = shost_priv(sh);
718
719 sh->unique_id = base_io;
720 sh->io_port = base_io;
721 sh->n_io_port = AHA1542_REGION_SIZE;
722 aha1542->aha1542_last_mbi_used = 2 * AHA1542_MAILBOXES - 1;
723 aha1542->aha1542_last_mbo_used = AHA1542_MAILBOXES - 1;
724
725 if (!aha1542_test_port(sh))
726 goto unregister;
727
728 aha1542_set_bus_times(sh, bus_on[indx], bus_off[indx], dma_speed[indx]);
729 if (aha1542_query(sh))
730 goto unregister;
731 if (aha1542_getconfig(sh) == -1)
732 goto unregister;
733
734 if (sh->dma_channel != 0xFF)
735 snprintf(dma_info, sizeof(dma_info), "DMA %d", sh->dma_channel);
736 shost_printk(KERN_INFO, sh, "Adaptec AHA-1542 (SCSI-ID %d) at IO 0x%x, IRQ %d, %s\n",
737 sh->this_id, base_io, sh->irq, dma_info);
738 if (aha1542->bios_translation == BIOS_TRANSLATION_25563)
739 shost_printk(KERN_INFO, sh, "Using extended bios translation\n");
740
741 setup_mailboxes(sh);
742
743 if (request_irq(sh->irq, aha1542_interrupt, 0, "aha1542", sh)) {
744 shost_printk(KERN_ERR, sh, "Unable to allocate IRQ.\n");
745 goto unregister;
746 }
747 if (sh->dma_channel != 0xFF) {
748 if (request_dma(sh->dma_channel, "aha1542")) {
749 shost_printk(KERN_ERR, sh, "Unable to allocate DMA channel.\n");
750 goto free_irq;
751 }
752 if (sh->dma_channel == 0 || sh->dma_channel >= 5) {
753 set_dma_mode(sh->dma_channel, DMA_MODE_CASCADE);
754 enable_dma(sh->dma_channel);
755 }
756 }
757
758 if (scsi_add_host(sh, pdev))
759 goto free_dma;
760
761 scsi_scan_host(sh);
762
763 return sh;
764 free_dma:
765 if (sh->dma_channel != 0xff)
766 free_dma(sh->dma_channel);
767 free_irq:
768 free_irq(sh->irq, sh);
769 unregister:
770 scsi_host_put(sh);
771 release:
772 release_region(base_io, AHA1542_REGION_SIZE);
773
774 return NULL;
775 }
776
777 static int aha1542_release(struct Scsi_Host *sh)
778 {
779 scsi_remove_host(sh);
780 if (sh->dma_channel != 0xff)
781 free_dma(sh->dma_channel);
782 if (sh->irq)
783 free_irq(sh->irq, sh);
784 if (sh->io_port && sh->n_io_port)
785 release_region(sh->io_port, sh->n_io_port);
786 scsi_host_put(sh);
787 return 0;
788 }
789
790
791 /*
792 * This is a device reset. This is handled by sending a special command
793 * to the device.
794 */
795 static int aha1542_dev_reset(struct scsi_cmnd *cmd)
796 {
797 struct Scsi_Host *sh = cmd->device->host;
798 struct aha1542_hostdata *aha1542 = shost_priv(sh);
799 unsigned long flags;
800 struct mailbox *mb = aha1542->mb;
801 u8 target = cmd->device->id;
802 u8 lun = cmd->device->lun;
803 int mbo;
804 struct ccb *ccb = aha1542->ccb;
805
806 spin_lock_irqsave(sh->host_lock, flags);
807 mbo = aha1542->aha1542_last_mbo_used + 1;
808 if (mbo >= AHA1542_MAILBOXES)
809 mbo = 0;
810
811 do {
812 if (mb[mbo].status == 0 && aha1542->int_cmds[mbo] == NULL)
813 break;
814 mbo++;
815 if (mbo >= AHA1542_MAILBOXES)
816 mbo = 0;
817 } while (mbo != aha1542->aha1542_last_mbo_used);
818
819 if (mb[mbo].status || aha1542->int_cmds[mbo])
820 panic("Unable to find empty mailbox for aha1542.\n");
821
822 aha1542->int_cmds[mbo] = cmd; /* This will effectively
823 prevent someone else from
824 screwing with this cdb. */
825
826 aha1542->aha1542_last_mbo_used = mbo;
827
828 any2scsi(mb[mbo].ccbptr, isa_virt_to_bus(&ccb[mbo])); /* This gets trashed for some reason */
829
830 memset(&ccb[mbo], 0, sizeof(struct ccb));
831
832 ccb[mbo].op = 0x81; /* BUS DEVICE RESET */
833
834 ccb[mbo].idlun = (target & 7) << 5 | (lun & 7); /*SCSI Target Id */
835
836 ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0;
837 ccb[mbo].commlinkid = 0;
838
839 /*
840 * Now tell the 1542 to flush all pending commands for this
841 * target
842 */
843 aha1542_outb(sh->io_port, CMD_START_SCSI);
844 spin_unlock_irqrestore(sh->host_lock, flags);
845
846 scmd_printk(KERN_WARNING, cmd,
847 "Trying device reset for target\n");
848
849 return SUCCESS;
850 }
851
852 static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd)
853 {
854 struct Scsi_Host *sh = cmd->device->host;
855 struct aha1542_hostdata *aha1542 = shost_priv(sh);
856 unsigned long flags;
857 int i;
858
859 spin_lock_irqsave(sh->host_lock, flags);
860 /*
861 * This does a scsi reset for all devices on the bus.
862 * In principle, we could also reset the 1542 - should
863 * we do this? Try this first, and we can add that later
864 * if it turns out to be useful.
865 */
866 outb(reset_cmd, CONTROL(cmd->device->host->io_port));
867
868 if (!wait_mask(STATUS(cmd->device->host->io_port),
869 STATMASK, IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0)) {
870 spin_unlock_irqrestore(sh->host_lock, flags);
871 return FAILED;
872 }
873
874 /*
875 * We need to do this too before the 1542 can interact with
876 * us again after host reset.
877 */
878 if (reset_cmd & HRST)
879 setup_mailboxes(cmd->device->host);
880
881 /*
882 * Now try to pick up the pieces. For all pending commands,
883 * free any internal data structures, and basically clear things
884 * out. We do not try and restart any commands or anything -
885 * the strategy handler takes care of that crap.
886 */
887 shost_printk(KERN_WARNING, cmd->device->host, "Sent BUS RESET to scsi host %d\n", cmd->device->host->host_no);
888
889 for (i = 0; i < AHA1542_MAILBOXES; i++) {
890 if (aha1542->int_cmds[i] != NULL) {
891 struct scsi_cmnd *tmp_cmd;
892 tmp_cmd = aha1542->int_cmds[i];
893
894 if (tmp_cmd->device->soft_reset) {
895 /*
896 * If this device implements the soft reset option,
897 * then it is still holding onto the command, and
898 * may yet complete it. In this case, we don't
899 * flush the data.
900 */
901 continue;
902 }
903 kfree(tmp_cmd->host_scribble);
904 tmp_cmd->host_scribble = NULL;
905 aha1542->int_cmds[i] = NULL;
906 aha1542->mb[i].status = 0;
907 }
908 }
909
910 spin_unlock_irqrestore(sh->host_lock, flags);
911 return SUCCESS;
912 }
913
914 static int aha1542_bus_reset(struct scsi_cmnd *cmd)
915 {
916 return aha1542_reset(cmd, SCRST);
917 }
918
919 static int aha1542_host_reset(struct scsi_cmnd *cmd)
920 {
921 return aha1542_reset(cmd, HRST | SCRST);
922 }
923
924 static int aha1542_biosparam(struct scsi_device *sdev,
925 struct block_device *bdev, sector_t capacity, int geom[])
926 {
927 struct aha1542_hostdata *aha1542 = shost_priv(sdev->host);
928
929 if (capacity >= 0x200000 &&
930 aha1542->bios_translation == BIOS_TRANSLATION_25563) {
931 /* Please verify that this is the same as what DOS returns */
932 geom[0] = 255; /* heads */
933 geom[1] = 63; /* sectors */
934 } else {
935 geom[0] = 64; /* heads */
936 geom[1] = 32; /* sectors */
937 }
938 geom[2] = sector_div(capacity, geom[0] * geom[1]); /* cylinders */
939
940 return 0;
941 }
942 MODULE_LICENSE("GPL");
943
944 static struct scsi_host_template driver_template = {
945 .module = THIS_MODULE,
946 .proc_name = "aha1542",
947 .name = "Adaptec 1542",
948 .queuecommand = aha1542_queuecommand,
949 .eh_device_reset_handler= aha1542_dev_reset,
950 .eh_bus_reset_handler = aha1542_bus_reset,
951 .eh_host_reset_handler = aha1542_host_reset,
952 .bios_param = aha1542_biosparam,
953 .can_queue = AHA1542_MAILBOXES,
954 .this_id = 7,
955 .sg_tablesize = 16,
956 .unchecked_isa_dma = 1,
957 .use_clustering = ENABLE_CLUSTERING,
958 };
959
960 static int aha1542_isa_match(struct device *pdev, unsigned int ndev)
961 {
962 struct Scsi_Host *sh = aha1542_hw_init(&driver_template, pdev, ndev);
963
964 if (!sh)
965 return 0;
966
967 dev_set_drvdata(pdev, sh);
968 return 1;
969 }
970
971 static int aha1542_isa_remove(struct device *pdev,
972 unsigned int ndev)
973 {
974 aha1542_release(dev_get_drvdata(pdev));
975 dev_set_drvdata(pdev, NULL);
976 return 0;
977 }
978
979 static struct isa_driver aha1542_isa_driver = {
980 .match = aha1542_isa_match,
981 .remove = aha1542_isa_remove,
982 .driver = {
983 .name = "aha1542"
984 },
985 };
986 static int isa_registered;
987
988 #ifdef CONFIG_PNP
989 static const struct pnp_device_id aha1542_pnp_ids[] = {
990 { .id = "ADP1542" },
991 { .id = "" }
992 };
993 MODULE_DEVICE_TABLE(pnp, aha1542_pnp_ids);
994
995 static int aha1542_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id)
996 {
997 int indx;
998 struct Scsi_Host *sh;
999
1000 for (indx = 0; indx < ARRAY_SIZE(io); indx++) {
1001 if (io[indx])
1002 continue;
1003
1004 if (pnp_activate_dev(pdev) < 0)
1005 continue;
1006
1007 io[indx] = pnp_port_start(pdev, 0);
1008
1009 /* The card can be queried for its DMA, we have
1010 the DMA set up that is enough */
1011
1012 dev_info(&pdev->dev, "ISAPnP found an AHA1535 at I/O 0x%03X", io[indx]);
1013 }
1014
1015 sh = aha1542_hw_init(&driver_template, &pdev->dev, indx);
1016 if (!sh)
1017 return -ENODEV;
1018
1019 pnp_set_drvdata(pdev, sh);
1020 return 0;
1021 }
1022
1023 static void aha1542_pnp_remove(struct pnp_dev *pdev)
1024 {
1025 aha1542_release(pnp_get_drvdata(pdev));
1026 pnp_set_drvdata(pdev, NULL);
1027 }
1028
1029 static struct pnp_driver aha1542_pnp_driver = {
1030 .name = "aha1542",
1031 .id_table = aha1542_pnp_ids,
1032 .probe = aha1542_pnp_probe,
1033 .remove = aha1542_pnp_remove,
1034 };
1035 static int pnp_registered;
1036 #endif /* CONFIG_PNP */
1037
1038 static int __init aha1542_init(void)
1039 {
1040 int ret = 0;
1041
1042 #ifdef CONFIG_PNP
1043 if (isapnp) {
1044 ret = pnp_register_driver(&aha1542_pnp_driver);
1045 if (!ret)
1046 pnp_registered = 1;
1047 }
1048 #endif
1049 ret = isa_register_driver(&aha1542_isa_driver, MAXBOARDS);
1050 if (!ret)
1051 isa_registered = 1;
1052
1053 #ifdef CONFIG_PNP
1054 if (pnp_registered)
1055 ret = 0;
1056 #endif
1057 if (isa_registered)
1058 ret = 0;
1059
1060 return ret;
1061 }
1062
1063 static void __exit aha1542_exit(void)
1064 {
1065 #ifdef CONFIG_PNP
1066 if (pnp_registered)
1067 pnp_unregister_driver(&aha1542_pnp_driver);
1068 #endif
1069 if (isa_registered)
1070 isa_unregister_driver(&aha1542_isa_driver);
1071 }
1072
1073 module_init(aha1542_init);
1074 module_exit(aha1542_exit);
Linux with added FPC-III support