Linux 4.16.11

[linux/fpc-iii.git] / drivers / scsi / bnx2i / bnx2i_init.c

/* bnx2i.c: QLogic NetXtreme II iSCSI driver.
 *
 * Copyright (c) 2006 - 2013 Broadcom Corporation
 * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
 * Copyright (c) 2007, 2008 Mike Christie
 * Copyright (c) 2014, QLogic Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation.
 *
 * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
 * Previously Maintained by: Eddie Wai (eddie.wai@broadcom.com)
 * Maintained by: QLogic-Storage-Upstream@qlogic.com
 */

#include "bnx2i.h"

static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
static u32 adapter_count;

#define DRV_MODULE_NAME         "bnx2i"
#define DRV_MODULE_VERSION      "2.7.10.1"
#define DRV_MODULE_RELDATE      "Jul 16, 2014"

static char version[] =
                "QLogic NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
                " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";


MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com> and "
              "Eddie Wai <eddie.wai@broadcom.com>");

MODULE_DESCRIPTION("QLogic NetXtreme II BCM5706/5708/5709/57710/57711/57712"
                   "/57800/57810/57840 iSCSI Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);

static DEFINE_MUTEX(bnx2i_dev_lock);

unsigned int event_coal_min = 24;
module_param(event_coal_min, int, 0664);
MODULE_PARM_DESC(event_coal_min, "Event Coalescing Minimum Commands");

unsigned int event_coal_div = 2;
module_param(event_coal_div, int, 0664);
MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor");

unsigned int en_tcp_dack = 1;
module_param(en_tcp_dack, int, 0664);
MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK");

unsigned int error_mask1 = 0x00;
module_param(error_mask1, uint, 0664);
MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1");

unsigned int error_mask2 = 0x00;
module_param(error_mask2, uint, 0664);
MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2");

unsigned int sq_size;
module_param(sq_size, int, 0664);
MODULE_PARM_DESC(sq_size, "Configure SQ size");

unsigned int rq_size = BNX2I_RQ_WQES_DEFAULT;
module_param(rq_size, int, 0664);
MODULE_PARM_DESC(rq_size, "Configure RQ size");

u64 iscsi_error_mask = 0x00;

DEFINE_PER_CPU(struct bnx2i_percpu_s, bnx2i_percpu);

/**
 * bnx2i_identify_device - identifies NetXtreme II device type
 * @hba:                Adapter structure pointer
 * @cnic:               Corresponding cnic device
 *
 * This function identifies the NX2 device type and sets appropriate
 *      queue mailbox register access method, 5709 requires driver to
 *      access MBOX regs using *bin* mode
 */
void bnx2i_identify_device(struct bnx2i_hba *hba, struct cnic_dev *dev)
{
        hba->cnic_dev_type = 0;
        if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
                if (hba->pci_did == PCI_DEVICE_ID_NX2_5706 ||
                    hba->pci_did == PCI_DEVICE_ID_NX2_5706S) {
                        set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
                } else if (hba->pci_did == PCI_DEVICE_ID_NX2_5708 ||
                    hba->pci_did == PCI_DEVICE_ID_NX2_5708S) {
                        set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
                } else if (hba->pci_did == PCI_DEVICE_ID_NX2_5709 ||
                    hba->pci_did == PCI_DEVICE_ID_NX2_5709S) {
                        set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
                        hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
                }
        } else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
                set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
        } else {
                printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n",
                                  hba->pci_did);
        }
}


/**
 * get_adapter_list_head - returns head of adapter list
 */
struct bnx2i_hba *get_adapter_list_head(void)
{
        struct bnx2i_hba *hba = NULL;
        struct bnx2i_hba *tmp_hba;

        if (!adapter_count)
                goto hba_not_found;

        mutex_lock(&bnx2i_dev_lock);
        list_for_each_entry(tmp_hba, &adapter_list, link) {
                if (tmp_hba->cnic && tmp_hba->cnic->cm_select_dev) {
                        hba = tmp_hba;
                        break;
                }
        }
        mutex_unlock(&bnx2i_dev_lock);
hba_not_found:
        return hba;
}


/**
 * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance
 * @cnic:       pointer to cnic device instance
 *
 */
struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic)
{
        struct bnx2i_hba *hba, *temp;

        mutex_lock(&bnx2i_dev_lock);
        list_for_each_entry_safe(hba, temp, &adapter_list, link) {
                if (hba->cnic == cnic) {
                        mutex_unlock(&bnx2i_dev_lock);
                        return hba;
                }
        }
        mutex_unlock(&bnx2i_dev_lock);
        return NULL;
}


/**
 * bnx2i_start - cnic callback to initialize & start adapter instance
 * @handle:     transparent handle pointing to adapter structure
 *
 * This function maps adapter structure to pcidev structure and initiates
 *      firmware handshake to enable/initialize on chip iscsi components
 *      This bnx2i - cnic interface api callback is issued after following
 *      2 conditions are met -
 *        a) underlying network interface is up (marked by event 'NETDEV_UP'
 *              from netdev
 *        b) bnx2i adapter instance is registered
 */
void bnx2i_start(void *handle)
{
#define BNX2I_INIT_POLL_TIME    (1000 / HZ)
        struct bnx2i_hba *hba = handle;
        int i = HZ;

        /* On some bnx2x devices, it is possible that iSCSI is no
         * longer supported after firmware is downloaded.  In that
         * case, the iscsi_init_msg will return failure.
         */

        bnx2i_send_fw_iscsi_init_msg(hba);
        while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) &&
               !test_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state) && i--)
                msleep(BNX2I_INIT_POLL_TIME);
}


/**
 * bnx2i_chip_cleanup - local routine to handle chip cleanup
 * @hba:        Adapter instance to register
 *
 * Driver checks if adapter still has any active connections before
 *      executing the cleanup process
 */
static void bnx2i_chip_cleanup(struct bnx2i_hba *hba)
{
        struct bnx2i_endpoint *bnx2i_ep;
        struct list_head *pos, *tmp;

        if (hba->ofld_conns_active) {
                /* Stage to force the disconnection
                 * This is the case where the daemon is either slow or
                 * not present
                 */
                printk(KERN_ALERT "bnx2i: (%s) chip cleanup for %d active "
                        "connections\n", hba->netdev->name,
                        hba->ofld_conns_active);
                mutex_lock(&hba->net_dev_lock);
                list_for_each_safe(pos, tmp, &hba->ep_active_list) {
                        bnx2i_ep = list_entry(pos, struct bnx2i_endpoint, link);
                        /* Clean up the chip only */
                        bnx2i_hw_ep_disconnect(bnx2i_ep);
                        bnx2i_ep->cm_sk = NULL;
                }
                mutex_unlock(&hba->net_dev_lock);
        }
}


/**
 * bnx2i_stop - cnic callback to shutdown adapter instance
 * @handle:     transparent handle pointing to adapter structure
 *
 * driver checks if adapter is already in shutdown mode, if not start
 *      the shutdown process
 */
void bnx2i_stop(void *handle)
{
        struct bnx2i_hba *hba = handle;
        int conns_active;
        int wait_delay = 1 * HZ;

        /* check if cleanup happened in GOING_DOWN context */
        if (!test_and_set_bit(ADAPTER_STATE_GOING_DOWN,
                              &hba->adapter_state)) {
                iscsi_host_for_each_session(hba->shost,
                                            bnx2i_drop_session);
                wait_delay = hba->hba_shutdown_tmo;
        }
        /* Wait for inflight offload connection tasks to complete before
         * proceeding. Forcefully terminate all connection recovery in
         * progress at the earliest, either in bind(), send_pdu(LOGIN),
         * or conn_start()
         */
        wait_event_interruptible_timeout(hba->eh_wait,
                                         (list_empty(&hba->ep_ofld_list) &&
                                         list_empty(&hba->ep_destroy_list)),
                                         2 * HZ);
        /* Wait for all endpoints to be torn down, Chip will be reset once
         *  control returns to network driver. So it is required to cleanup and
         * release all connection resources before returning from this routine.
         */
        while (hba->ofld_conns_active) {
                conns_active = hba->ofld_conns_active;
                wait_event_interruptible_timeout(hba->eh_wait,
                                (hba->ofld_conns_active != conns_active),
                                wait_delay);
                if (hba->ofld_conns_active == conns_active)
                        break;
        }
        bnx2i_chip_cleanup(hba);

        /* This flag should be cleared last so that ep_disconnect() gracefully
         * cleans up connection context
         */
        clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
        clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
}


/**
 * bnx2i_init_one - initialize an adapter instance and allocate memory resources
 * @hba:        bnx2i adapter instance
 * @cnic:       cnic device handle
 *
 * Global resource lock is held during critical sections below. This routine is
 *      called from either cnic_register_driver() or device hot plug context and
 *      and does majority of device specific initialization
 */
static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic)
{
        int rc;

        mutex_lock(&bnx2i_dev_lock);
        if (!cnic->max_iscsi_conn) {
                printk(KERN_ALERT "bnx2i: dev %s does not support "
                        "iSCSI\n", hba->netdev->name);
                rc = -EOPNOTSUPP;
                goto out;
        }

        hba->cnic = cnic;
        rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba);
        if (!rc) {
                hba->age++;
                set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
                list_add_tail(&hba->link, &adapter_list);
                adapter_count++;
        } else if (rc == -EBUSY)        /* duplicate registration */
                printk(KERN_ALERT "bnx2i, duplicate registration"
                                  "hba=%p, cnic=%p\n", hba, cnic);
        else if (rc == -EAGAIN)
                printk(KERN_ERR "bnx2i, driver not registered\n");
        else if (rc == -EINVAL)
                printk(KERN_ERR "bnx2i, invalid type %d\n", CNIC_ULP_ISCSI);
        else
                printk(KERN_ERR "bnx2i dev reg, unknown error, %d\n", rc);

out:
        mutex_unlock(&bnx2i_dev_lock);

        return rc;
}


/**
 * bnx2i_ulp_init - initialize an adapter instance
 * @dev:        cnic device handle
 *
 * Called from cnic_register_driver() context to initialize all enumerated
 *      cnic devices. This routine allocate adapter structure and other
 *      device specific resources.
 */
void bnx2i_ulp_init(struct cnic_dev *dev)
{
        struct bnx2i_hba *hba;

        /* Allocate a HBA structure for this device */
        hba = bnx2i_alloc_hba(dev);
        if (!hba) {
                printk(KERN_ERR "bnx2i init: hba initialization failed\n");
                return;
        }

        /* Get PCI related information and update hba struct members */
        clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
        if (bnx2i_init_one(hba, dev)) {
                printk(KERN_ERR "bnx2i - hba %p init failed\n", hba);
                bnx2i_free_hba(hba);
        }
}


/**
 * bnx2i_ulp_exit - shuts down adapter instance and frees all resources
 * @dev:        cnic device handle
 *
 */
void bnx2i_ulp_exit(struct cnic_dev *dev)
{
        struct bnx2i_hba *hba;

        hba = bnx2i_find_hba_for_cnic(dev);
        if (!hba) {
                printk(KERN_INFO "bnx2i_ulp_exit: hba not "
                                 "found, dev 0x%p\n", dev);
                return;
        }
        mutex_lock(&bnx2i_dev_lock);
        list_del_init(&hba->link);
        adapter_count--;

        if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
                hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
                clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
        }
        mutex_unlock(&bnx2i_dev_lock);

        bnx2i_free_hba(hba);
}


/**
 * bnx2i_get_stats - Retrieve various statistic from iSCSI offload
 * @handle:     bnx2i_hba
 *
 * function callback exported via bnx2i - cnic driver interface to
 *      retrieve various iSCSI offload related statistics.
 */
int bnx2i_get_stats(void *handle)
{
        struct bnx2i_hba *hba = handle;
        struct iscsi_stats_info *stats;

        if (!hba)
                return -EINVAL;

        stats = (struct iscsi_stats_info *)hba->cnic->stats_addr;

        if (!stats)
                return -ENOMEM;

        strlcpy(stats->version, DRV_MODULE_VERSION, sizeof(stats->version));
        memcpy(stats->mac_add1 + 2, hba->cnic->mac_addr, ETH_ALEN);

        stats->max_frame_size = hba->netdev->mtu;
        stats->txq_size = hba->max_sqes;
        stats->rxq_size = hba->max_cqes;

        stats->txq_avg_depth = 0;
        stats->rxq_avg_depth = 0;

        GET_STATS_64(hba, stats, rx_pdus);
        GET_STATS_64(hba, stats, rx_bytes);

        GET_STATS_64(hba, stats, tx_pdus);
        GET_STATS_64(hba, stats, tx_bytes);

        return 0;
}


/**
 * bnx2i_cpu_online - Create a receive thread for an online CPU
 *
 * @cpu:        cpu index for the online cpu
 */
static int bnx2i_cpu_online(unsigned int cpu)
{
        struct bnx2i_percpu_s *p;
        struct task_struct *thread;

        p = &per_cpu(bnx2i_percpu, cpu);

        thread = kthread_create_on_node(bnx2i_percpu_io_thread, (void *)p,
                                        cpu_to_node(cpu),
                                        "bnx2i_thread/%d", cpu);
        if (IS_ERR(thread))
                return PTR_ERR(thread);

        /* bind thread to the cpu */
        kthread_bind(thread, cpu);
        p->iothread = thread;
        wake_up_process(thread);
        return 0;
}

static int bnx2i_cpu_offline(unsigned int cpu)
{
        struct bnx2i_percpu_s *p;
        struct task_struct *thread;
        struct bnx2i_work *work, *tmp;

        /* Prevent any new work from being queued for this CPU */
        p = &per_cpu(bnx2i_percpu, cpu);
        spin_lock_bh(&p->p_work_lock);
        thread = p->iothread;
        p->iothread = NULL;

        /* Free all work in the list */
        list_for_each_entry_safe(work, tmp, &p->work_list, list) {
                list_del_init(&work->list);
                bnx2i_process_scsi_cmd_resp(work->session,
                                            work->bnx2i_conn, &work->cqe);
                kfree(work);
        }

        spin_unlock_bh(&p->p_work_lock);
        if (thread)
                kthread_stop(thread);
        return 0;
}

static enum cpuhp_state bnx2i_online_state;

/**
 * bnx2i_mod_init - module init entry point
 *
 * initialize any driver wide global data structures such as endpoint pool,
 *      tcp port manager/queue, sysfs. finally driver will register itself
 *      with the cnic module
 */
static int __init bnx2i_mod_init(void)
{
        int err;
        unsigned cpu = 0;
        struct bnx2i_percpu_s *p;

        printk(KERN_INFO "%s", version);

        if (sq_size && !is_power_of_2(sq_size))
                sq_size = roundup_pow_of_two(sq_size);

        mutex_init(&bnx2i_dev_lock);

        bnx2i_scsi_xport_template =
                        iscsi_register_transport(&bnx2i_iscsi_transport);
        if (!bnx2i_scsi_xport_template) {
                printk(KERN_ERR "Could not register bnx2i transport.\n");
                err = -ENOMEM;
                goto out;
        }

        err = cnic_register_driver(CNIC_ULP_ISCSI, &bnx2i_cnic_cb);
        if (err) {
                printk(KERN_ERR "Could not register bnx2i cnic driver.\n");
                goto unreg_xport;
        }

        /* Create percpu kernel threads to handle iSCSI I/O completions */
        for_each_possible_cpu(cpu) {
                p = &per_cpu(bnx2i_percpu, cpu);
                INIT_LIST_HEAD(&p->work_list);
                spin_lock_init(&p->p_work_lock);
                p->iothread = NULL;
        }

        err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "scsi/bnx2i:online",
                                bnx2i_cpu_online, bnx2i_cpu_offline);
        if (err < 0)
                goto unreg_driver;
        bnx2i_online_state = err;
        return 0;

unreg_driver:
        cnic_unregister_driver(CNIC_ULP_ISCSI);
unreg_xport:
        iscsi_unregister_transport(&bnx2i_iscsi_transport);
out:
        return err;
}


/**
 * bnx2i_mod_exit - module cleanup/exit entry point
 *
 * Global resource lock and host adapter lock is held during critical sections
 *      in this function. Driver will browse through the adapter list, cleans-up
 *      each instance, unregisters iscsi transport name and finally driver will
 *      unregister itself with the cnic module
 */
static void __exit bnx2i_mod_exit(void)
{
        struct bnx2i_hba *hba;

        mutex_lock(&bnx2i_dev_lock);
        while (!list_empty(&adapter_list)) {
                hba = list_entry(adapter_list.next, struct bnx2i_hba, link);
                list_del(&hba->link);
                adapter_count--;

                if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
                        bnx2i_chip_cleanup(hba);
                        hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
                        clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
                }

                bnx2i_free_hba(hba);
        }
        mutex_unlock(&bnx2i_dev_lock);

        cpuhp_remove_state(bnx2i_online_state);

        iscsi_unregister_transport(&bnx2i_iscsi_transport);
        cnic_unregister_driver(CNIC_ULP_ISCSI);
}

module_init(bnx2i_mod_init);
module_exit(bnx2i_mod_exit);