Linux 4.16.11
[linux/fpc-iii.git] / drivers / scsi / isci / init.c
blob922e3e56c90d945a19a81faab8d7ff8c239d3448
1 /*
2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
5 * GPL LICENSE SUMMARY
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * BSD LICENSE
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
31 * are met:
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
38 * distribution.
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
56 #include <linux/kernel.h>
57 #include <linux/init.h>
58 #include <linux/module.h>
59 #include <linux/firmware.h>
60 #include <linux/efi.h>
61 #include <asm/string.h>
62 #include <scsi/scsi_host.h>
63 #include "host.h"
64 #include "isci.h"
65 #include "task.h"
66 #include "probe_roms.h"
68 #define MAJ 1
69 #define MIN 2
70 #define BUILD 0
71 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
72 __stringify(BUILD)
74 MODULE_VERSION(DRV_VERSION);
76 static struct scsi_transport_template *isci_transport_template;
78 static const struct pci_device_id isci_id_table[] = {
79 { PCI_VDEVICE(INTEL, 0x1D61),},
80 { PCI_VDEVICE(INTEL, 0x1D63),},
81 { PCI_VDEVICE(INTEL, 0x1D65),},
82 { PCI_VDEVICE(INTEL, 0x1D67),},
83 { PCI_VDEVICE(INTEL, 0x1D69),},
84 { PCI_VDEVICE(INTEL, 0x1D6B),},
85 { PCI_VDEVICE(INTEL, 0x1D60),},
86 { PCI_VDEVICE(INTEL, 0x1D62),},
87 { PCI_VDEVICE(INTEL, 0x1D64),},
88 { PCI_VDEVICE(INTEL, 0x1D66),},
89 { PCI_VDEVICE(INTEL, 0x1D68),},
90 { PCI_VDEVICE(INTEL, 0x1D6A),},
94 MODULE_DEVICE_TABLE(pci, isci_id_table);
96 /* linux isci specific settings */
98 unsigned char no_outbound_task_to = 2;
99 module_param(no_outbound_task_to, byte, 0);
100 MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)");
102 u16 ssp_max_occ_to = 20;
103 module_param(ssp_max_occ_to, ushort, 0);
104 MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)");
106 u16 stp_max_occ_to = 5;
107 module_param(stp_max_occ_to, ushort, 0);
108 MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)");
110 u16 ssp_inactive_to = 5;
111 module_param(ssp_inactive_to, ushort, 0);
112 MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)");
114 u16 stp_inactive_to = 5;
115 module_param(stp_inactive_to, ushort, 0);
116 MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)");
118 unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED;
119 module_param(phy_gen, byte, 0);
120 MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
122 unsigned char max_concurr_spinup;
123 module_param(max_concurr_spinup, byte, 0);
124 MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
126 uint cable_selection_override = CABLE_OVERRIDE_DISABLED;
127 module_param(cable_selection_override, uint, 0);
129 MODULE_PARM_DESC(cable_selection_override,
130 "This field indicates length of the SAS/SATA cable between "
131 "host and device. If any bits > 15 are set (default) "
132 "indicates \"use platform defaults\"");
134 static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
136 struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
137 struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
138 struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
140 return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
143 static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
145 struct device_attribute *isci_host_attrs[] = {
146 &dev_attr_isci_id,
147 NULL
150 static struct scsi_host_template isci_sht = {
152 .module = THIS_MODULE,
153 .name = DRV_NAME,
154 .proc_name = DRV_NAME,
155 .queuecommand = sas_queuecommand,
156 .target_alloc = sas_target_alloc,
157 .slave_configure = sas_slave_configure,
158 .scan_finished = isci_host_scan_finished,
159 .scan_start = isci_host_start,
160 .change_queue_depth = sas_change_queue_depth,
161 .bios_param = sas_bios_param,
162 .can_queue = ISCI_CAN_QUEUE_VAL,
163 .this_id = -1,
164 .sg_tablesize = SG_ALL,
165 .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
166 .use_clustering = ENABLE_CLUSTERING,
167 .eh_abort_handler = sas_eh_abort_handler,
168 .eh_device_reset_handler = sas_eh_device_reset_handler,
169 .eh_target_reset_handler = sas_eh_target_reset_handler,
170 .target_destroy = sas_target_destroy,
171 .ioctl = sas_ioctl,
172 .shost_attrs = isci_host_attrs,
173 .track_queue_depth = 1,
176 static struct sas_domain_function_template isci_transport_ops = {
178 /* The class calls these to notify the LLDD of an event. */
179 .lldd_port_formed = isci_port_formed,
180 .lldd_port_deformed = isci_port_deformed,
182 /* The class calls these when a device is found or gone. */
183 .lldd_dev_found = isci_remote_device_found,
184 .lldd_dev_gone = isci_remote_device_gone,
186 .lldd_execute_task = isci_task_execute_task,
187 /* Task Management Functions. Must be called from process context. */
188 .lldd_abort_task = isci_task_abort_task,
189 .lldd_abort_task_set = isci_task_abort_task_set,
190 .lldd_clear_aca = isci_task_clear_aca,
191 .lldd_clear_task_set = isci_task_clear_task_set,
192 .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset,
193 .lldd_lu_reset = isci_task_lu_reset,
194 .lldd_query_task = isci_task_query_task,
196 /* ata recovery called from ata-eh */
197 .lldd_ata_check_ready = isci_ata_check_ready,
199 /* Port and Adapter management */
200 .lldd_clear_nexus_port = isci_task_clear_nexus_port,
201 .lldd_clear_nexus_ha = isci_task_clear_nexus_ha,
203 /* Phy management */
204 .lldd_control_phy = isci_phy_control,
206 /* GPIO support */
207 .lldd_write_gpio = isci_gpio_write,
211 /******************************************************************************
212 * P R O T E C T E D M E T H O D S
213 ******************************************************************************/
218 * isci_register_sas_ha() - This method initializes various lldd
219 * specific members of the sas_ha struct and calls the libsas
220 * sas_register_ha() function.
221 * @isci_host: This parameter specifies the lldd specific wrapper for the
222 * libsas sas_ha struct.
224 * This method returns an error code indicating success or failure. The user
225 * should check for possible memory allocation error return otherwise, a zero
226 * indicates success.
228 static int isci_register_sas_ha(struct isci_host *isci_host)
230 int i;
231 struct sas_ha_struct *sas_ha = &(isci_host->sas_ha);
232 struct asd_sas_phy **sas_phys;
233 struct asd_sas_port **sas_ports;
235 sas_phys = devm_kzalloc(&isci_host->pdev->dev,
236 SCI_MAX_PHYS * sizeof(void *),
237 GFP_KERNEL);
238 if (!sas_phys)
239 return -ENOMEM;
241 sas_ports = devm_kzalloc(&isci_host->pdev->dev,
242 SCI_MAX_PORTS * sizeof(void *),
243 GFP_KERNEL);
244 if (!sas_ports)
245 return -ENOMEM;
247 sas_ha->sas_ha_name = DRV_NAME;
248 sas_ha->lldd_module = THIS_MODULE;
249 sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0];
251 for (i = 0; i < SCI_MAX_PHYS; i++) {
252 sas_phys[i] = &isci_host->phys[i].sas_phy;
253 sas_ports[i] = &isci_host->sas_ports[i];
256 sas_ha->sas_phy = sas_phys;
257 sas_ha->sas_port = sas_ports;
258 sas_ha->num_phys = SCI_MAX_PHYS;
260 sas_ha->strict_wide_ports = 1;
262 sas_register_ha(sas_ha);
264 return 0;
267 static void isci_unregister(struct isci_host *isci_host)
269 struct Scsi_Host *shost;
271 if (!isci_host)
272 return;
274 shost = to_shost(isci_host);
275 sas_unregister_ha(&isci_host->sas_ha);
277 sas_remove_host(shost);
278 scsi_host_put(shost);
281 static int isci_pci_init(struct pci_dev *pdev)
283 int err, bar_num, bar_mask = 0;
284 void __iomem * const *iomap;
286 err = pcim_enable_device(pdev);
287 if (err) {
288 dev_err(&pdev->dev,
289 "failed enable PCI device %s!\n",
290 pci_name(pdev));
291 return err;
294 for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++)
295 bar_mask |= 1 << (bar_num * 2);
297 err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME);
298 if (err)
299 return err;
301 iomap = pcim_iomap_table(pdev);
302 if (!iomap)
303 return -ENOMEM;
305 pci_set_master(pdev);
307 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
308 if (err) {
309 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
310 if (err)
311 return err;
314 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
315 if (err) {
316 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
317 if (err)
318 return err;
321 return 0;
324 static int num_controllers(struct pci_dev *pdev)
326 /* bar size alone can tell us if we are running with a dual controller
327 * part, no need to trust revision ids that might be under broken firmware
328 * control
330 resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2);
331 resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2);
333 if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS &&
334 smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS)
335 return SCI_MAX_CONTROLLERS;
336 else
337 return 1;
340 static int isci_setup_interrupts(struct pci_dev *pdev)
342 int err, i, num_msix;
343 struct isci_host *ihost;
344 struct isci_pci_info *pci_info = to_pci_info(pdev);
347 * Determine the number of vectors associated with this
348 * PCI function.
350 num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT;
352 err = pci_alloc_irq_vectors(pdev, num_msix, num_msix, PCI_IRQ_MSIX);
353 if (err < 0)
354 goto intx;
356 for (i = 0; i < num_msix; i++) {
357 int id = i / SCI_NUM_MSI_X_INT;
358 irq_handler_t isr;
360 ihost = pci_info->hosts[id];
361 /* odd numbered vectors are error interrupts */
362 if (i & 1)
363 isr = isci_error_isr;
364 else
365 isr = isci_msix_isr;
367 err = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, i),
368 isr, 0, DRV_NAME"-msix", ihost);
369 if (!err)
370 continue;
372 dev_info(&pdev->dev, "msix setup failed falling back to intx\n");
373 while (i--) {
374 id = i / SCI_NUM_MSI_X_INT;
375 ihost = pci_info->hosts[id];
376 devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i),
377 ihost);
379 pci_free_irq_vectors(pdev);
380 goto intx;
382 return 0;
384 intx:
385 for_each_isci_host(i, ihost, pdev) {
386 err = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, 0),
387 isci_intx_isr, IRQF_SHARED, DRV_NAME"-intx",
388 ihost);
389 if (err)
390 break;
392 return err;
395 static void isci_user_parameters_get(struct sci_user_parameters *u)
397 int i;
399 for (i = 0; i < SCI_MAX_PHYS; i++) {
400 struct sci_phy_user_params *u_phy = &u->phys[i];
402 u_phy->max_speed_generation = phy_gen;
404 /* we are not exporting these for now */
405 u_phy->align_insertion_frequency = 0x7f;
406 u_phy->in_connection_align_insertion_frequency = 0xff;
407 u_phy->notify_enable_spin_up_insertion_frequency = 0x33;
410 u->stp_inactivity_timeout = stp_inactive_to;
411 u->ssp_inactivity_timeout = ssp_inactive_to;
412 u->stp_max_occupancy_timeout = stp_max_occ_to;
413 u->ssp_max_occupancy_timeout = ssp_max_occ_to;
414 u->no_outbound_task_timeout = no_outbound_task_to;
415 u->max_concurr_spinup = max_concurr_spinup;
418 static enum sci_status sci_user_parameters_set(struct isci_host *ihost,
419 struct sci_user_parameters *sci_parms)
421 u16 index;
424 * Validate the user parameters. If they are not legal, then
425 * return a failure.
427 for (index = 0; index < SCI_MAX_PHYS; index++) {
428 struct sci_phy_user_params *u;
430 u = &sci_parms->phys[index];
432 if (!((u->max_speed_generation <= SCIC_SDS_PARM_MAX_SPEED) &&
433 (u->max_speed_generation > SCIC_SDS_PARM_NO_SPEED)))
434 return SCI_FAILURE_INVALID_PARAMETER_VALUE;
436 if (u->in_connection_align_insertion_frequency < 3)
437 return SCI_FAILURE_INVALID_PARAMETER_VALUE;
439 if ((u->in_connection_align_insertion_frequency < 3) ||
440 (u->align_insertion_frequency == 0) ||
441 (u->notify_enable_spin_up_insertion_frequency == 0))
442 return SCI_FAILURE_INVALID_PARAMETER_VALUE;
445 if ((sci_parms->stp_inactivity_timeout == 0) ||
446 (sci_parms->ssp_inactivity_timeout == 0) ||
447 (sci_parms->stp_max_occupancy_timeout == 0) ||
448 (sci_parms->ssp_max_occupancy_timeout == 0) ||
449 (sci_parms->no_outbound_task_timeout == 0))
450 return SCI_FAILURE_INVALID_PARAMETER_VALUE;
452 memcpy(&ihost->user_parameters, sci_parms, sizeof(*sci_parms));
454 return SCI_SUCCESS;
457 static void sci_oem_defaults(struct isci_host *ihost)
459 /* these defaults are overridden by the platform / firmware */
460 struct sci_user_parameters *user = &ihost->user_parameters;
461 struct sci_oem_params *oem = &ihost->oem_parameters;
462 int i;
464 /* Default to APC mode. */
465 oem->controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
467 /* Default to APC mode. */
468 oem->controller.max_concurr_spin_up = 1;
470 /* Default to no SSC operation. */
471 oem->controller.do_enable_ssc = false;
473 /* Default to short cables on all phys. */
474 oem->controller.cable_selection_mask = 0;
476 /* Initialize all of the port parameter information to narrow ports. */
477 for (i = 0; i < SCI_MAX_PORTS; i++)
478 oem->ports[i].phy_mask = 0;
480 /* Initialize all of the phy parameter information. */
481 for (i = 0; i < SCI_MAX_PHYS; i++) {
482 /* Default to 3G (i.e. Gen 2). */
483 user->phys[i].max_speed_generation = SCIC_SDS_PARM_GEN2_SPEED;
485 /* the frequencies cannot be 0 */
486 user->phys[i].align_insertion_frequency = 0x7f;
487 user->phys[i].in_connection_align_insertion_frequency = 0xff;
488 user->phys[i].notify_enable_spin_up_insertion_frequency = 0x33;
490 /* Previous Vitesse based expanders had a arbitration issue that
491 * is worked around by having the upper 32-bits of SAS address
492 * with a value greater then the Vitesse company identifier.
493 * Hence, usage of 0x5FCFFFFF.
495 oem->phys[i].sas_address.low = 0x1 + ihost->id;
496 oem->phys[i].sas_address.high = 0x5FCFFFFF;
499 user->stp_inactivity_timeout = 5;
500 user->ssp_inactivity_timeout = 5;
501 user->stp_max_occupancy_timeout = 5;
502 user->ssp_max_occupancy_timeout = 20;
503 user->no_outbound_task_timeout = 2;
506 static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
508 struct isci_orom *orom = to_pci_info(pdev)->orom;
509 struct sci_user_parameters sci_user_params;
510 u8 oem_version = ISCI_ROM_VER_1_0;
511 struct isci_host *ihost;
512 struct Scsi_Host *shost;
513 int err, i;
515 ihost = devm_kzalloc(&pdev->dev, sizeof(*ihost), GFP_KERNEL);
516 if (!ihost)
517 return NULL;
519 ihost->pdev = pdev;
520 ihost->id = id;
521 spin_lock_init(&ihost->scic_lock);
522 init_waitqueue_head(&ihost->eventq);
523 ihost->sas_ha.dev = &ihost->pdev->dev;
524 ihost->sas_ha.lldd_ha = ihost;
525 tasklet_init(&ihost->completion_tasklet,
526 isci_host_completion_routine, (unsigned long)ihost);
528 /* validate module parameters */
529 /* TODO: kill struct sci_user_parameters and reference directly */
530 sci_oem_defaults(ihost);
531 isci_user_parameters_get(&sci_user_params);
532 if (sci_user_parameters_set(ihost, &sci_user_params)) {
533 dev_warn(&pdev->dev,
534 "%s: sci_user_parameters_set failed\n", __func__);
535 return NULL;
538 /* sanity check platform (or 'firmware') oem parameters */
539 if (orom) {
540 if (id < 0 || id >= SCI_MAX_CONTROLLERS || id > orom->hdr.num_elements) {
541 dev_warn(&pdev->dev, "parsing firmware oem parameters failed\n");
542 return NULL;
544 ihost->oem_parameters = orom->ctrl[id];
545 oem_version = orom->hdr.version;
548 /* validate oem parameters (platform, firmware, or built-in defaults) */
549 if (sci_oem_parameters_validate(&ihost->oem_parameters, oem_version)) {
550 dev_warn(&pdev->dev, "oem parameter validation failed\n");
551 return NULL;
554 for (i = 0; i < SCI_MAX_PORTS; i++) {
555 struct isci_port *iport = &ihost->ports[i];
557 INIT_LIST_HEAD(&iport->remote_dev_list);
558 iport->isci_host = ihost;
561 for (i = 0; i < SCI_MAX_PHYS; i++)
562 isci_phy_init(&ihost->phys[i], ihost, i);
564 for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
565 struct isci_remote_device *idev = &ihost->devices[i];
567 INIT_LIST_HEAD(&idev->node);
570 shost = scsi_host_alloc(&isci_sht, sizeof(void *));
571 if (!shost)
572 return NULL;
574 dev_info(&pdev->dev, "%sSCU controller %d: phy 3-0 cables: "
575 "{%s, %s, %s, %s}\n",
576 (is_cable_select_overridden() ? "* " : ""), ihost->id,
577 lookup_cable_names(decode_cable_selection(ihost, 3)),
578 lookup_cable_names(decode_cable_selection(ihost, 2)),
579 lookup_cable_names(decode_cable_selection(ihost, 1)),
580 lookup_cable_names(decode_cable_selection(ihost, 0)));
582 err = isci_host_init(ihost);
583 if (err)
584 goto err_shost;
586 SHOST_TO_SAS_HA(shost) = &ihost->sas_ha;
587 ihost->sas_ha.core.shost = shost;
588 shost->transportt = isci_transport_template;
590 shost->max_id = ~0;
591 shost->max_lun = ~0;
592 shost->max_cmd_len = MAX_COMMAND_SIZE;
594 err = scsi_add_host(shost, &pdev->dev);
595 if (err)
596 goto err_shost;
598 err = isci_register_sas_ha(ihost);
599 if (err)
600 goto err_shost_remove;
602 return ihost;
604 err_shost_remove:
605 scsi_remove_host(shost);
606 err_shost:
607 scsi_host_put(shost);
609 return NULL;
612 static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
614 struct isci_pci_info *pci_info;
615 int err, i;
616 struct isci_host *isci_host;
617 const struct firmware *fw = NULL;
618 struct isci_orom *orom = NULL;
619 char *source = "(platform)";
621 dev_info(&pdev->dev, "driver configured for rev: %d silicon\n",
622 pdev->revision);
624 pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL);
625 if (!pci_info)
626 return -ENOMEM;
627 pci_set_drvdata(pdev, pci_info);
629 if (efi_enabled(EFI_RUNTIME_SERVICES))
630 orom = isci_get_efi_var(pdev);
632 if (!orom)
633 orom = isci_request_oprom(pdev);
635 for (i = 0; orom && i < num_controllers(pdev); i++) {
636 if (sci_oem_parameters_validate(&orom->ctrl[i],
637 orom->hdr.version)) {
638 dev_warn(&pdev->dev,
639 "[%d]: invalid oem parameters detected, falling back to firmware\n", i);
640 orom = NULL;
641 break;
645 if (!orom) {
646 source = "(firmware)";
647 orom = isci_request_firmware(pdev, fw);
648 if (!orom) {
649 /* TODO convert this to WARN_TAINT_ONCE once the
650 * orom/efi parameter support is widely available
652 dev_warn(&pdev->dev,
653 "Loading user firmware failed, using default "
654 "values\n");
655 dev_warn(&pdev->dev,
656 "Default OEM configuration being used: 4 "
657 "narrow ports, and default SAS Addresses\n");
661 if (orom)
662 dev_info(&pdev->dev,
663 "OEM SAS parameters (version: %u.%u) loaded %s\n",
664 (orom->hdr.version & 0xf0) >> 4,
665 (orom->hdr.version & 0xf), source);
667 pci_info->orom = orom;
669 err = isci_pci_init(pdev);
670 if (err)
671 return err;
673 for (i = 0; i < num_controllers(pdev); i++) {
674 struct isci_host *h = isci_host_alloc(pdev, i);
676 if (!h) {
677 err = -ENOMEM;
678 goto err_host_alloc;
680 pci_info->hosts[i] = h;
682 /* turn on DIF support */
683 scsi_host_set_prot(to_shost(h),
684 SHOST_DIF_TYPE1_PROTECTION |
685 SHOST_DIF_TYPE2_PROTECTION |
686 SHOST_DIF_TYPE3_PROTECTION);
687 scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC);
690 err = isci_setup_interrupts(pdev);
691 if (err)
692 goto err_host_alloc;
694 for_each_isci_host(i, isci_host, pdev)
695 scsi_scan_host(to_shost(isci_host));
697 return 0;
699 err_host_alloc:
700 for_each_isci_host(i, isci_host, pdev)
701 isci_unregister(isci_host);
702 return err;
705 static void isci_pci_remove(struct pci_dev *pdev)
707 struct isci_host *ihost;
708 int i;
710 for_each_isci_host(i, ihost, pdev) {
711 wait_for_start(ihost);
712 isci_unregister(ihost);
713 isci_host_deinit(ihost);
717 #ifdef CONFIG_PM_SLEEP
718 static int isci_suspend(struct device *dev)
720 struct pci_dev *pdev = to_pci_dev(dev);
721 struct isci_host *ihost;
722 int i;
724 for_each_isci_host(i, ihost, pdev) {
725 sas_suspend_ha(&ihost->sas_ha);
726 isci_host_deinit(ihost);
729 pci_save_state(pdev);
730 pci_disable_device(pdev);
731 pci_set_power_state(pdev, PCI_D3hot);
733 return 0;
736 static int isci_resume(struct device *dev)
738 struct pci_dev *pdev = to_pci_dev(dev);
739 struct isci_host *ihost;
740 int rc, i;
742 pci_set_power_state(pdev, PCI_D0);
743 pci_restore_state(pdev);
745 rc = pcim_enable_device(pdev);
746 if (rc) {
747 dev_err(&pdev->dev,
748 "enabling device failure after resume(%d)\n", rc);
749 return rc;
752 pci_set_master(pdev);
754 for_each_isci_host(i, ihost, pdev) {
755 sas_prep_resume_ha(&ihost->sas_ha);
757 isci_host_init(ihost);
758 isci_host_start(ihost->sas_ha.core.shost);
759 wait_for_start(ihost);
761 sas_resume_ha(&ihost->sas_ha);
764 return 0;
766 #endif
768 static SIMPLE_DEV_PM_OPS(isci_pm_ops, isci_suspend, isci_resume);
770 static struct pci_driver isci_pci_driver = {
771 .name = DRV_NAME,
772 .id_table = isci_id_table,
773 .probe = isci_pci_probe,
774 .remove = isci_pci_remove,
775 .driver.pm = &isci_pm_ops,
778 static __init int isci_init(void)
780 int err;
782 pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
783 DRV_NAME, DRV_VERSION);
785 isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
786 if (!isci_transport_template)
787 return -ENOMEM;
789 err = pci_register_driver(&isci_pci_driver);
790 if (err)
791 sas_release_transport(isci_transport_template);
793 return err;
796 static __exit void isci_exit(void)
798 pci_unregister_driver(&isci_pci_driver);
799 sas_release_transport(isci_transport_template);
802 MODULE_LICENSE("Dual BSD/GPL");
803 MODULE_FIRMWARE(ISCI_FW_NAME);
804 module_init(isci_init);
805 module_exit(isci_exit);