drivers/scsi/isci/sas.h

   1 /*
   2  * This file is provided under a dual BSD/GPLv2 license.  When using or
   3  * redistributing this file, you may do so under either license.
   4  *
   5  * GPL LICENSE SUMMARY
   6  *
   7  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of version 2 of the GNU General Public License as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16  * General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  21  * The full GNU General Public License is included in this distribution
  22  * in the file called LICENSE.GPL.
  23  *
  24  * BSD LICENSE
  25  *
  26  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
  27  * All rights reserved.
  28  *
  29  * Redistribution and use in source and binary forms, with or without
  30  * modification, are permitted provided that the following conditions
  31  * are met:
  32  *
  33  *   * Redistributions of source code must retain the above copyright
  34  *     notice, this list of conditions and the following disclaimer.
  35  *   * Redistributions in binary form must reproduce the above copyright
  36  *     notice, this list of conditions and the following disclaimer in
  37  *     the documentation and/or other materials provided with the
  38  *     distribution.
  39  *   * Neither the name of Intel Corporation nor the names of its
  40  *     contributors may be used to endorse or promote products derived
  41  *     from this software without specific prior written permission.
  42  *
  43  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  44  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  45  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  46  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  47  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  48  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  49  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  50  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  51  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  52  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  53  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  54  */
  55
  56 #ifndef _SCI_SAS_H_
  57 #define _SCI_SAS_H_
  58
  59 #include <linux/kernel.h>
  60
  61 /*
  62  * SATA FIS Types These constants depict the various SATA FIS types devined in
  63  * the serial ATA specification.
  64  * XXX: This needs to go into <scsi/sas.h>
  65  */
  66 #define FIS_REGH2D          0x27
  67 #define FIS_REGD2H          0x34
  68 #define FIS_SETDEVBITS      0xA1
  69 #define FIS_DMA_ACTIVATE    0x39
  70 #define FIS_DMA_SETUP       0x41
  71 #define FIS_BIST_ACTIVATE   0x58
  72 #define FIS_PIO_SETUP       0x5F
  73 #define FIS_DATA            0x46
  74
  75 /**************************************************************************/
  76 #define SSP_RESP_IU_MAX_SIZE    280
  77
  78 /*
  79  * contents of the SSP COMMAND INFORMATION UNIT.
  80  * For specific information on each of these individual fields please
  81  * reference the SAS specification SSP transport layer section.
  82  * XXX: This needs to go into <scsi/sas.h>
  83  */
  84 struct ssp_cmd_iu {
  85         u8 LUN[8];
  86         u8 add_cdb_len:6;
  87         u8 _r_a:2;
  88         u8 _r_b;
  89         u8 en_fburst:1;
  90         u8 task_prio:4;
  91         u8 task_attr:3;
  92         u8 _r_c;
  93
  94         u8 cdb[16];
  95 }  __packed;
  96
  97 /*
  98  * contents of the SSP TASK INFORMATION UNIT.
  99  * For specific information on each of these individual fields please
 100  * reference the SAS specification SSP transport layer section.
 101  * XXX: This needs to go into <scsi/sas.h>
 102  */
 103 struct ssp_task_iu {
 104         u8 LUN[8];
 105         u8 _r_a;
 106         u8 task_func;
 107         u8 _r_b[4];
 108         u16 task_tag;
 109         u8 _r_c[12];
 110 }  __packed;
 111
 112
 113 /*
 114  * struct smp_req_phy_id - This structure defines the contents of
 115  *    an SMP Request that is comprised of the struct smp_request_header and a
 116  *    phy identifier.
 117  *    Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA.
 118  *
 119  * For specific information on each of these individual fields please reference
 120  * the SAS specification.
 121  */
 122 struct smp_req_phy_id {
 123         u8 _r_a[4];             /* bytes 4-7 */
 124
 125         u8 ign_zone_grp:1;      /* byte 8 */
 126         u8 _r_b:7;
 127
 128         u8 phy_id;              /* byte 9 */
 129         u8 _r_c;                /* byte 10 */
 130         u8 _r_d;                /* byte 11 */
 131 }  __packed;
 132
 133 /*
 134  * struct smp_req_config_route_info - This structure defines the
 135  *    contents of an SMP Configure Route Information request.
 136  *
 137  * For specific information on each of these individual fields please reference
 138  * the SAS specification.
 139  */
 140 struct smp_req_conf_rtinfo {
 141         u16 exp_change_cnt;             /* bytes 4-5 */
 142         u8 exp_rt_idx_hi;               /* byte 6 */
 143         u8 exp_rt_idx;                  /* byte 7 */
 144
 145         u8 _r_a;                        /* byte 8 */
 146         u8 phy_id;                      /* byte 9 */
 147         u16 _r_b;                       /* bytes 10-11 */
 148
 149         u8 _r_c:7;                      /* byte 12 */
 150         u8 dis_rt_entry:1;
 151         u8 _r_d[3];                     /* bytes 13-15 */
 152
 153         u8 rt_sas_addr[8];              /* bytes 16-23 */
 154         u8 _r_e[16];                    /* bytes 24-39 */
 155 }  __packed;
 156
 157 /*
 158  * struct smp_req_phycntl - This structure defines the contents of an
 159  *    SMP Phy Controller request.
 160  *
 161  * For specific information on each of these individual fields please reference
 162  * the SAS specification.
 163  */
 164 struct smp_req_phycntl {
 165         u16 exp_change_cnt;             /* byte 4-5 */
 166
 167         u8 _r_a[3];                     /* bytes 6-8 */
 168
 169         u8 phy_id;                      /* byte 9 */
 170         u8 phy_op;                      /* byte 10 */
 171
 172         u8 upd_pathway:1;               /* byte 11 */
 173         u8 _r_b:7;
 174
 175         u8 _r_c[12];                    /* byte 12-23 */
 176
 177         u8 att_dev_name[8];             /* byte 24-31 */
 178
 179         u8 _r_d:4;                      /* byte 32 */
 180         u8 min_linkrate:4;
 181
 182         u8 _r_e:4;                      /* byte 33 */
 183         u8 max_linkrate:4;
 184
 185         u8 _r_f[2];                     /* byte 34-35 */
 186
 187         u8 pathway:4;                   /* byte 36 */
 188         u8 _r_g:4;
 189
 190         u8 _r_h[3];                     /* bytes 37-39 */
 191 }  __packed;
 192
 193 /*
 194  * struct smp_req - This structure simply unionizes the existing request
 195  *    structures into a common request type.
 196  *
 197  * XXX: This data structure may need to go to scsi/sas.h
 198  */
 199 struct smp_req {
 200         u8 type;                /* byte 0 */
 201         u8 func;                /* byte 1 */
 202         u8 alloc_resp_len;      /* byte 2 */
 203         u8 req_len;             /* byte 3 */
 204         u8 req_data[0];
 205 }  __packed;
 206
 207 /*
 208  * struct sci_sas_address - This structure depicts how a SAS address is
 209  *    represented by SCI.
 210  * XXX convert this to u8 [SAS_ADDR_SIZE] like the rest of libsas
 211  *
 212  */
 213 struct sci_sas_address {
 214         u32 high;
 215         u32 low;
 216 };
 217 #endif