drivers/scsi/lpfc/lpfc_bsg.h

   1 /*******************************************************************
   2  * This file is part of the Emulex Linux Device Driver for         *
   3  * Fibre Channel Host Bus Adapters.                                *
   4  * Copyright (C) 2017 Broadcom. All Rights Reserved. The term      *
   5  * “Broadcom” refers to Broadcom Limited and/or its subsidiaries.  *
   6  * Copyright (C) 2010-2015 Emulex.  All rights reserved.           *
   7  * EMULEX and SLI are trademarks of Emulex.                        *
   8  * www.broadcom.com                                                *
   9  *                                                                 *
  10  * This program is free software; you can redistribute it and/or   *
  11  * modify it under the terms of version 2 of the GNU General       *
  12  * Public License as published by the Free Software Foundation.    *
  13  * This program is distributed in the hope that it will be useful. *
  14  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
  15  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
  16  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
  17  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
  18  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
  19  * more details, a copy of which can be found in the file COPYING  *
  20  * included with this package.                                     *
  21  *******************************************************************/
  22 /* bsg definitions
  23  * No pointers to user data are allowed, all application buffers and sizes will
  24  * derived through the bsg interface.
  25  *
  26  * These are the vendor unique structures passed in using the bsg
  27  * FC_BSG_HST_VENDOR message code type.
  28  */
  29 #define LPFC_BSG_VENDOR_SET_CT_EVENT            1
  30 #define LPFC_BSG_VENDOR_GET_CT_EVENT            2
  31 #define LPFC_BSG_VENDOR_SEND_MGMT_RESP          3
  32 #define LPFC_BSG_VENDOR_DIAG_MODE               4
  33 #define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK       5
  34 #define LPFC_BSG_VENDOR_GET_MGMT_REV            6
  35 #define LPFC_BSG_VENDOR_MBOX                    7
  36 #define LPFC_BSG_VENDOR_MENLO_CMD               8
  37 #define LPFC_BSG_VENDOR_MENLO_DATA              9
  38 #define LPFC_BSG_VENDOR_DIAG_MODE_END           10
  39 #define LPFC_BSG_VENDOR_LINK_DIAG_TEST          11
  40 #define LPFC_BSG_VENDOR_FORCED_LINK_SPEED       14
  41
  42 struct set_ct_event {
  43         uint32_t command;
  44         uint32_t type_mask;
  45         uint32_t ev_req_id;
  46         uint32_t ev_reg_id;
  47 };
  48
  49 struct get_ct_event {
  50         uint32_t command;
  51         uint32_t ev_reg_id;
  52         uint32_t ev_req_id;
  53 };
  54
  55 struct get_ct_event_reply {
  56         uint32_t immed_data;
  57         uint32_t type;
  58 };
  59
  60 struct send_mgmt_resp {
  61         uint32_t command;
  62         uint32_t tag;
  63 };
  64
  65
  66 #define INTERNAL_LOOP_BACK 0x1 /* adapter short cuts the loop internally */
  67 #define EXTERNAL_LOOP_BACK 0x2 /* requires an external loopback plug */
  68
  69 struct diag_mode_set {
  70         uint32_t command;
  71         uint32_t type;
  72         uint32_t timeout;
  73 };
  74
  75 struct sli4_link_diag {
  76         uint32_t command;
  77         uint32_t timeout;
  78         uint32_t test_id;
  79         uint32_t loops;
  80         uint32_t test_version;
  81         uint32_t error_action;
  82 };
  83
  84 struct diag_mode_test {
  85         uint32_t command;
  86 };
  87
  88 struct diag_status {
  89         uint32_t mbox_status;
  90         uint32_t shdr_status;
  91         uint32_t shdr_add_status;
  92 };
  93
  94 #define LPFC_WWNN_TYPE          0
  95 #define LPFC_WWPN_TYPE          1
  96
  97 struct get_mgmt_rev {
  98         uint32_t command;
  99 };
 100
 101 #define MANAGEMENT_MAJOR_REV   1
 102 #define MANAGEMENT_MINOR_REV   1
 103
 104 /* the MgmtRevInfo structure */
 105 struct MgmtRevInfo {
 106         uint32_t a_Major;
 107         uint32_t a_Minor;
 108 };
 109
 110 struct get_mgmt_rev_reply {
 111         struct MgmtRevInfo info;
 112 };
 113
 114 #define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */
 115
 116 /* BSG mailbox request header */
 117 struct dfc_mbox_req {
 118         uint32_t command;
 119         uint32_t mbOffset;
 120         uint32_t inExtWLen;
 121         uint32_t outExtWLen;
 122         uint32_t extMboxTag;
 123         uint32_t extSeqNum;
 124 };
 125
 126 /* Used for menlo command or menlo data. The xri is only used for menlo data */
 127 struct menlo_command {
 128         uint32_t cmd;
 129         uint32_t xri;
 130 };
 131
 132 struct menlo_response {
 133         uint32_t xri; /* return the xri of the iocb exchange */
 134 };
 135
 136 /*
 137  * macros and data structures for handling sli-config mailbox command
 138  * pass-through support, this header file is shared between user and
 139  * kernel spaces, note the set of macros are duplicates from lpfc_hw4.h,
 140  * with macro names prefixed with bsg_, as the macros defined in
 141  * lpfc_hw4.h are not accessible from user space.
 142  */
 143
 144 /* Macros to deal with bit fields. Each bit field must have 3 #defines
 145  * associated with it (_SHIFT, _MASK, and _WORD).
 146  * EG. For a bit field that is in the 7th bit of the "field4" field of a
 147  * structure and is 2 bits in size the following #defines must exist:
 148  *      struct temp {
 149  *              uint32_t        field1;
 150  *              uint32_t        field2;
 151  *              uint32_t        field3;
 152  *              uint32_t        field4;
 153  *      #define example_bit_field_SHIFT         7
 154  *      #define example_bit_field_MASK          0x03
 155  *      #define example_bit_field_WORD          field4
 156  *              uint32_t        field5;
 157  *      };
 158  * Then the macros below may be used to get or set the value of that field.
 159  * EG. To get the value of the bit field from the above example:
 160  *      struct temp t1;
 161  *      value = bsg_bf_get(example_bit_field, &t1);
 162  * And then to set that bit field:
 163  *      bsg_bf_set(example_bit_field, &t1, 2);
 164  * Or clear that bit field:
 165  *      bsg_bf_set(example_bit_field, &t1, 0);
 166  */
 167 #define bsg_bf_get_le32(name, ptr) \
 168         ((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK)
 169 #define bsg_bf_get(name, ptr) \
 170         (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
 171 #define bsg_bf_set_le32(name, ptr, value) \
 172         ((ptr)->name##_WORD = cpu_to_le32(((((value) & \
 173         name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \
 174         ~(name##_MASK << name##_SHIFT)))))
 175 #define bsg_bf_set(name, ptr, value) \
 176         ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
 177         ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
 178
 179 /*
 180  * The sli_config structure specified here is based on the following
 181  * restriction:
 182  *
 183  * -- SLI_CONFIG EMB=0, carrying MSEs, will carry subcommands without
 184  *    carrying HBD.
 185  * -- SLI_CONFIG EMB=1, not carrying MSE, will carry subcommands with or
 186  *    without carrying HBDs.
 187  */
 188
 189 struct lpfc_sli_config_mse {
 190         uint32_t pa_lo;
 191         uint32_t pa_hi;
 192         uint32_t buf_len;
 193 #define lpfc_mbox_sli_config_mse_len_SHIFT      0
 194 #define lpfc_mbox_sli_config_mse_len_MASK       0xffffff
 195 #define lpfc_mbox_sli_config_mse_len_WORD       buf_len
 196 };
 197
 198 struct lpfc_sli_config_hbd {
 199         uint32_t buf_len;
 200 #define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0
 201 #define lpfc_mbox_sli_config_ecmn_hbd_len_MASK  0xffffff
 202 #define lpfc_mbox_sli_config_ecmn_hbd_len_WORD  buf_len
 203         uint32_t pa_lo;
 204         uint32_t pa_hi;
 205 };
 206
 207 struct lpfc_sli_config_hdr {
 208         uint32_t word1;
 209 #define lpfc_mbox_hdr_emb_SHIFT         0
 210 #define lpfc_mbox_hdr_emb_MASK          0x00000001
 211 #define lpfc_mbox_hdr_emb_WORD          word1
 212 #define lpfc_mbox_hdr_mse_cnt_SHIFT     3
 213 #define lpfc_mbox_hdr_mse_cnt_MASK      0x0000001f
 214 #define lpfc_mbox_hdr_mse_cnt_WORD      word1
 215         uint32_t payload_length;
 216         uint32_t tag_lo;
 217         uint32_t tag_hi;
 218         uint32_t reserved5;
 219 };
 220
 221 struct lpfc_sli_config_emb0_subsys {
 222         struct lpfc_sli_config_hdr      sli_config_hdr;
 223 #define LPFC_MBX_SLI_CONFIG_MAX_MSE     19
 224         struct lpfc_sli_config_mse      mse[LPFC_MBX_SLI_CONFIG_MAX_MSE];
 225         uint32_t padding;
 226         uint32_t word64;
 227 #define lpfc_emb0_subcmnd_opcode_SHIFT  0
 228 #define lpfc_emb0_subcmnd_opcode_MASK   0xff
 229 #define lpfc_emb0_subcmnd_opcode_WORD   word64
 230 #define lpfc_emb0_subcmnd_subsys_SHIFT  8
 231 #define lpfc_emb0_subcmnd_subsys_MASK   0xff
 232 #define lpfc_emb0_subcmnd_subsys_WORD   word64
 233 /* Subsystem FCOE (0x0C) OpCodes */
 234 #define SLI_CONFIG_SUBSYS_FCOE          0x0C
 235 #define FCOE_OPCODE_READ_FCF            0x08
 236 #define FCOE_OPCODE_ADD_FCF             0x09
 237 #define FCOE_OPCODE_SET_DPORT_MODE      0x27
 238 #define FCOE_OPCODE_GET_DPORT_RESULTS   0x28
 239 };
 240
 241 struct lpfc_sli_config_emb1_subsys {
 242         struct lpfc_sli_config_hdr      sli_config_hdr;
 243         uint32_t word6;
 244 #define lpfc_emb1_subcmnd_opcode_SHIFT  0
 245 #define lpfc_emb1_subcmnd_opcode_MASK   0xff
 246 #define lpfc_emb1_subcmnd_opcode_WORD   word6
 247 #define lpfc_emb1_subcmnd_subsys_SHIFT  8
 248 #define lpfc_emb1_subcmnd_subsys_MASK   0xff
 249 #define lpfc_emb1_subcmnd_subsys_WORD   word6
 250 /* Subsystem COMN (0x01) OpCodes */
 251 #define SLI_CONFIG_SUBSYS_COMN          0x01
 252 #define COMN_OPCODE_GET_PROFILE_CONFIG  0xA4
 253 #define COMN_OPCODE_READ_OBJECT         0xAB
 254 #define COMN_OPCODE_WRITE_OBJECT        0xAC
 255 #define COMN_OPCODE_READ_OBJECT_LIST    0xAD
 256 #define COMN_OPCODE_DELETE_OBJECT       0xAE
 257 #define COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES    0x79
 258 #define COMN_OPCODE_GET_CNTL_ATTRIBUTES 0x20
 259         uint32_t timeout;
 260         uint32_t request_length;
 261         uint32_t word9;
 262 #define lpfc_subcmnd_version_SHIFT      0
 263 #define lpfc_subcmnd_version_MASK       0xff
 264 #define lpfc_subcmnd_version_WORD       word9
 265         uint32_t word10;
 266 #define lpfc_subcmnd_ask_rd_len_SHIFT   0
 267 #define lpfc_subcmnd_ask_rd_len_MASK    0xffffff
 268 #define lpfc_subcmnd_ask_rd_len_WORD    word10
 269         uint32_t rd_offset;
 270         uint32_t obj_name[26];
 271         uint32_t hbd_count;
 272 #define LPFC_MBX_SLI_CONFIG_MAX_HBD     8
 273         struct lpfc_sli_config_hbd      hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD];
 274 };
 275
 276 struct lpfc_sli_config_mbox {
 277         uint32_t word0;
 278 #define lpfc_mqe_status_SHIFT           16
 279 #define lpfc_mqe_status_MASK            0x0000FFFF
 280 #define lpfc_mqe_status_WORD            word0
 281 #define lpfc_mqe_command_SHIFT          8
 282 #define lpfc_mqe_command_MASK           0x000000FF
 283 #define lpfc_mqe_command_WORD           word0
 284         union {
 285                 struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys;
 286                 struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys;
 287         } un;
 288 };
 289
 290 #define LPFC_FORCED_LINK_SPEED_NOT_SUPPORTED    0
 291 #define LPFC_FORCED_LINK_SPEED_SUPPORTED        1
 292 struct get_forced_link_speed_support {
 293         uint32_t command;
 294 };
 295 struct forced_link_speed_support_reply {
 296         uint8_t supported;
 297 };
 298
 299 /* driver only */
 300 #define SLI_CONFIG_NOT_HANDLED          0
 301 #define SLI_CONFIG_HANDLED              1