2 * Driver for Broadcom BRCMSTB, NSP, NS2, Cygnus SPI Controllers
4 * Copyright 2016 Broadcom
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License, version 2, as
8 * published by the Free Software Foundation (the "GPL").
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License version 2 (GPLv2) for more details.
15 * You should have received a copy of the GNU General Public License
16 * version 2 (GPLv2) along with this source code.
19 #include <linux/clk.h>
20 #include <linux/delay.h>
21 #include <linux/device.h>
22 #include <linux/init.h>
23 #include <linux/interrupt.h>
25 #include <linux/ioport.h>
26 #include <linux/kernel.h>
27 #include <linux/module.h>
29 #include <linux/of_irq.h>
30 #include <linux/platform_device.h>
31 #include <linux/slab.h>
32 #include <linux/spi/spi.h>
33 #include <linux/sysfs.h>
34 #include <linux/types.h>
35 #include "spi-bcm-qspi.h"
37 #define DRIVER_NAME "bcm_qspi"
40 /* BSPI register offsets */
41 #define BSPI_REVISION_ID 0x000
42 #define BSPI_SCRATCH 0x004
43 #define BSPI_MAST_N_BOOT_CTRL 0x008
44 #define BSPI_BUSY_STATUS 0x00c
45 #define BSPI_INTR_STATUS 0x010
46 #define BSPI_B0_STATUS 0x014
47 #define BSPI_B0_CTRL 0x018
48 #define BSPI_B1_STATUS 0x01c
49 #define BSPI_B1_CTRL 0x020
50 #define BSPI_STRAP_OVERRIDE_CTRL 0x024
51 #define BSPI_FLEX_MODE_ENABLE 0x028
52 #define BSPI_BITS_PER_CYCLE 0x02c
53 #define BSPI_BITS_PER_PHASE 0x030
54 #define BSPI_CMD_AND_MODE_BYTE 0x034
55 #define BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
56 #define BSPI_BSPI_XOR_VALUE 0x03c
57 #define BSPI_BSPI_XOR_ENABLE 0x040
58 #define BSPI_BSPI_PIO_MODE_ENABLE 0x044
59 #define BSPI_BSPI_PIO_IODIR 0x048
60 #define BSPI_BSPI_PIO_DATA 0x04c
62 /* RAF register offsets */
63 #define BSPI_RAF_START_ADDR 0x100
64 #define BSPI_RAF_NUM_WORDS 0x104
65 #define BSPI_RAF_CTRL 0x108
66 #define BSPI_RAF_FULLNESS 0x10c
67 #define BSPI_RAF_WATERMARK 0x110
68 #define BSPI_RAF_STATUS 0x114
69 #define BSPI_RAF_READ_DATA 0x118
70 #define BSPI_RAF_WORD_CNT 0x11c
71 #define BSPI_RAF_CURR_ADDR 0x120
73 /* Override mode masks */
74 #define BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE BIT(0)
75 #define BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL BIT(1)
76 #define BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE BIT(2)
77 #define BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD BIT(3)
78 #define BSPI_STRAP_OVERRIDE_CTRL_ENDAIN_MODE BIT(4)
80 #define BSPI_ADDRLEN_3BYTES 3
81 #define BSPI_ADDRLEN_4BYTES 4
83 #define BSPI_RAF_STATUS_FIFO_EMPTY_MASK BIT(1)
85 #define BSPI_RAF_CTRL_START_MASK BIT(0)
86 #define BSPI_RAF_CTRL_CLEAR_MASK BIT(1)
88 #define BSPI_BPP_MODE_SELECT_MASK BIT(8)
89 #define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
91 #define BSPI_READ_LENGTH 512
93 /* MSPI register offsets */
94 #define MSPI_SPCR0_LSB 0x000
95 #define MSPI_SPCR0_MSB 0x004
96 #define MSPI_SPCR1_LSB 0x008
97 #define MSPI_SPCR1_MSB 0x00c
98 #define MSPI_NEWQP 0x010
99 #define MSPI_ENDQP 0x014
100 #define MSPI_SPCR2 0x018
101 #define MSPI_MSPI_STATUS 0x020
102 #define MSPI_CPTQP 0x024
103 #define MSPI_SPCR3 0x028
104 #define MSPI_TXRAM 0x040
105 #define MSPI_RXRAM 0x0c0
106 #define MSPI_CDRAM 0x140
107 #define MSPI_WRITE_LOCK 0x180
109 #define MSPI_MASTER_BIT BIT(7)
111 #define MSPI_NUM_CDRAM 16
112 #define MSPI_CDRAM_CONT_BIT BIT(7)
113 #define MSPI_CDRAM_BITSE_BIT BIT(6)
114 #define MSPI_CDRAM_PCS 0xf
116 #define MSPI_SPCR2_SPE BIT(6)
117 #define MSPI_SPCR2_CONT_AFTER_CMD BIT(7)
119 #define MSPI_MSPI_STATUS_SPIF BIT(0)
121 #define INTR_BASE_BIT_SHIFT 0x02
122 #define INTR_COUNT 0x07
124 #define NUM_CHIPSELECT 4
125 #define QSPI_SPBR_MIN 8U
126 #define QSPI_SPBR_MAX 255U
128 #define OPCODE_DIOR 0xBB
129 #define OPCODE_QIOR 0xEB
130 #define OPCODE_DIOR_4B 0xBC
131 #define OPCODE_QIOR_4B 0xEC
133 #define MAX_CMD_SIZE 6
135 #define ADDR_4MB_MASK GENMASK(22, 0)
137 /* stop at end of transfer, no other reason */
138 #define TRANS_STATUS_BREAK_NONE 0
139 /* stop at end of spi_message */
140 #define TRANS_STATUS_BREAK_EOM 1
141 /* stop at end of spi_transfer if delay */
142 #define TRANS_STATUS_BREAK_DELAY 2
143 /* stop at end of spi_transfer if cs_change */
144 #define TRANS_STATUS_BREAK_CS_CHANGE 4
145 /* stop if we run out of bytes */
146 #define TRANS_STATUS_BREAK_NO_BYTES 8
148 /* events that make us stop filling TX slots */
149 #define TRANS_STATUS_BREAK_TX (TRANS_STATUS_BREAK_EOM | \
150 TRANS_STATUS_BREAK_DELAY | \
151 TRANS_STATUS_BREAK_CS_CHANGE)
153 /* events that make us deassert CS */
154 #define TRANS_STATUS_BREAK_DESELECT (TRANS_STATUS_BREAK_EOM | \
155 TRANS_STATUS_BREAK_CS_CHANGE)
157 struct bcm_qspi_parms
{
163 struct bcm_xfer_mode
{
166 unsigned int addrlen
;
182 struct bcm_qspi_irq
{
183 const char *irq_name
;
184 const irq_handler_t irq_handler
;
189 struct bcm_qspi_dev_id
{
190 const struct bcm_qspi_irq
*irqp
;
196 struct spi_transfer
*trans
;
198 bool mspi_last_trans
;
202 struct platform_device
*pdev
;
203 struct spi_master
*master
;
207 void __iomem
*base
[BASEMAX
];
209 /* Some SoCs provide custom interrupt status register(s) */
210 struct bcm_qspi_soc_intc
*soc_intc
;
212 struct bcm_qspi_parms last_parms
;
213 struct qspi_trans trans_pos
;
218 struct spi_flash_read_message
*bspi_rf_msg
;
221 u32 bspi_rf_msg_status
;
222 struct bcm_xfer_mode xfer_mode
;
223 u32 s3_strap_override_ctrl
;
227 struct bcm_qspi_dev_id
*dev_ids
;
228 struct completion mspi_done
;
229 struct completion bspi_done
;
232 static inline bool has_bspi(struct bcm_qspi
*qspi
)
234 return qspi
->bspi_mode
;
237 /* Read qspi controller register*/
238 static inline u32
bcm_qspi_read(struct bcm_qspi
*qspi
, enum base_type type
,
241 return bcm_qspi_readl(qspi
->big_endian
, qspi
->base
[type
] + offset
);
244 /* Write qspi controller register*/
245 static inline void bcm_qspi_write(struct bcm_qspi
*qspi
, enum base_type type
,
246 unsigned int offset
, unsigned int data
)
248 bcm_qspi_writel(qspi
->big_endian
, data
, qspi
->base
[type
] + offset
);
252 static int bcm_qspi_bspi_busy_poll(struct bcm_qspi
*qspi
)
256 /* this should normally finish within 10us */
257 for (i
= 0; i
< 1000; i
++) {
258 if (!(bcm_qspi_read(qspi
, BSPI
, BSPI_BUSY_STATUS
) & 1))
262 dev_warn(&qspi
->pdev
->dev
, "timeout waiting for !busy_status\n");
266 static inline bool bcm_qspi_bspi_ver_three(struct bcm_qspi
*qspi
)
268 if (qspi
->bspi_maj_rev
< 4)
273 static void bcm_qspi_bspi_flush_prefetch_buffers(struct bcm_qspi
*qspi
)
275 bcm_qspi_bspi_busy_poll(qspi
);
276 /* Force rising edge for the b0/b1 'flush' field */
277 bcm_qspi_write(qspi
, BSPI
, BSPI_B0_CTRL
, 1);
278 bcm_qspi_write(qspi
, BSPI
, BSPI_B1_CTRL
, 1);
279 bcm_qspi_write(qspi
, BSPI
, BSPI_B0_CTRL
, 0);
280 bcm_qspi_write(qspi
, BSPI
, BSPI_B1_CTRL
, 0);
283 static int bcm_qspi_bspi_lr_is_fifo_empty(struct bcm_qspi
*qspi
)
285 return (bcm_qspi_read(qspi
, BSPI
, BSPI_RAF_STATUS
) &
286 BSPI_RAF_STATUS_FIFO_EMPTY_MASK
);
289 static inline u32
bcm_qspi_bspi_lr_read_fifo(struct bcm_qspi
*qspi
)
291 u32 data
= bcm_qspi_read(qspi
, BSPI
, BSPI_RAF_READ_DATA
);
293 /* BSPI v3 LR is LE only, convert data to host endianness */
294 if (bcm_qspi_bspi_ver_three(qspi
))
295 data
= le32_to_cpu(data
);
300 static inline void bcm_qspi_bspi_lr_start(struct bcm_qspi
*qspi
)
302 bcm_qspi_bspi_busy_poll(qspi
);
303 bcm_qspi_write(qspi
, BSPI
, BSPI_RAF_CTRL
,
304 BSPI_RAF_CTRL_START_MASK
);
307 static inline void bcm_qspi_bspi_lr_clear(struct bcm_qspi
*qspi
)
309 bcm_qspi_write(qspi
, BSPI
, BSPI_RAF_CTRL
,
310 BSPI_RAF_CTRL_CLEAR_MASK
);
311 bcm_qspi_bspi_flush_prefetch_buffers(qspi
);
314 static void bcm_qspi_bspi_lr_data_read(struct bcm_qspi
*qspi
)
316 u32
*buf
= (u32
*)qspi
->bspi_rf_msg
->buf
;
319 dev_dbg(&qspi
->pdev
->dev
, "xfer %p rx %p rxlen %d\n", qspi
->bspi_rf_msg
,
320 qspi
->bspi_rf_msg
->buf
, qspi
->bspi_rf_msg_len
);
321 while (!bcm_qspi_bspi_lr_is_fifo_empty(qspi
)) {
322 data
= bcm_qspi_bspi_lr_read_fifo(qspi
);
323 if (likely(qspi
->bspi_rf_msg_len
>= 4) &&
324 IS_ALIGNED((uintptr_t)buf
, 4)) {
325 buf
[qspi
->bspi_rf_msg_idx
++] = data
;
326 qspi
->bspi_rf_msg_len
-= 4;
328 /* Read out remaining bytes, make sure*/
329 u8
*cbuf
= (u8
*)&buf
[qspi
->bspi_rf_msg_idx
];
331 data
= cpu_to_le32(data
);
332 while (qspi
->bspi_rf_msg_len
) {
335 qspi
->bspi_rf_msg_len
--;
341 static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi
*qspi
, u8 cmd_byte
,
342 int bpp
, int bpc
, int flex_mode
)
344 bcm_qspi_write(qspi
, BSPI
, BSPI_FLEX_MODE_ENABLE
, 0);
345 bcm_qspi_write(qspi
, BSPI
, BSPI_BITS_PER_CYCLE
, bpc
);
346 bcm_qspi_write(qspi
, BSPI
, BSPI_BITS_PER_PHASE
, bpp
);
347 bcm_qspi_write(qspi
, BSPI
, BSPI_CMD_AND_MODE_BYTE
, cmd_byte
);
348 bcm_qspi_write(qspi
, BSPI
, BSPI_FLEX_MODE_ENABLE
, flex_mode
);
351 static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi
*qspi
,
352 struct spi_flash_read_message
*msg
,
355 int bpc
= 0, bpp
= 0;
356 u8 command
= msg
->read_opcode
;
357 int width
= msg
->data_nbits
? msg
->data_nbits
: SPI_NBITS_SINGLE
;
358 int addrlen
= msg
->addr_width
;
359 int addr_nbits
= msg
->addr_nbits
? msg
->addr_nbits
: SPI_NBITS_SINGLE
;
362 dev_dbg(&qspi
->pdev
->dev
, "set flex mode w %x addrlen %x hp %d\n",
365 if (addrlen
== BSPI_ADDRLEN_4BYTES
)
366 bpp
= BSPI_BPP_ADDR_SELECT_MASK
;
368 bpp
|= msg
->dummy_bytes
* (8/addr_nbits
);
371 case SPI_NBITS_SINGLE
:
372 if (addrlen
== BSPI_ADDRLEN_3BYTES
)
373 /* default mode, does not need flex_cmd */
379 bpc
|= 0x00010100; /* address and mode are 2-bit */
380 bpp
= BSPI_BPP_MODE_SELECT_MASK
;
386 bpc
|= 0x00020200; /* address and mode are 4-bit */
387 bpp
|= BSPI_BPP_MODE_SELECT_MASK
;
394 bcm_qspi_bspi_set_xfer_params(qspi
, command
, bpp
, bpc
, flex_mode
);
399 static int bcm_qspi_bspi_set_override(struct bcm_qspi
*qspi
,
400 struct spi_flash_read_message
*msg
,
403 int width
= msg
->data_nbits
? msg
->data_nbits
: SPI_NBITS_SINGLE
;
404 int addrlen
= msg
->addr_width
;
405 u32 data
= bcm_qspi_read(qspi
, BSPI
, BSPI_STRAP_OVERRIDE_CTRL
);
407 dev_dbg(&qspi
->pdev
->dev
, "set override mode w %x addrlen %x hp %d\n",
411 case SPI_NBITS_SINGLE
:
412 /* clear quad/dual mode */
413 data
&= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD
|
414 BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL
);
417 /* clear dual mode and set quad mode */
418 data
&= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL
;
419 data
|= BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD
;
422 /* clear quad mode set dual mode */
423 data
&= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD
;
424 data
|= BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL
;
430 if (addrlen
== BSPI_ADDRLEN_4BYTES
)
432 data
|= BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE
;
434 /* clear 4 byte mode */
435 data
&= ~BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE
;
437 /* set the override mode */
438 data
|= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE
;
439 bcm_qspi_write(qspi
, BSPI
, BSPI_STRAP_OVERRIDE_CTRL
, data
);
440 bcm_qspi_bspi_set_xfer_params(qspi
, msg
->read_opcode
, 0, 0, 0);
445 static int bcm_qspi_bspi_set_mode(struct bcm_qspi
*qspi
,
446 struct spi_flash_read_message
*msg
, int hp
)
449 int width
= msg
->data_nbits
? msg
->data_nbits
: SPI_NBITS_SINGLE
;
450 int addrlen
= msg
->addr_width
;
453 qspi
->xfer_mode
.flex_mode
= true;
455 if (!bcm_qspi_bspi_ver_three(qspi
)) {
458 val
= bcm_qspi_read(qspi
, BSPI
, BSPI_STRAP_OVERRIDE_CTRL
);
459 mask
= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE
;
460 if (val
& mask
|| qspi
->s3_strap_override_ctrl
& mask
) {
461 qspi
->xfer_mode
.flex_mode
= false;
462 bcm_qspi_write(qspi
, BSPI
, BSPI_FLEX_MODE_ENABLE
, 0);
463 error
= bcm_qspi_bspi_set_override(qspi
, msg
, hp
);
467 if (qspi
->xfer_mode
.flex_mode
)
468 error
= bcm_qspi_bspi_set_flex_mode(qspi
, msg
, hp
);
471 dev_warn(&qspi
->pdev
->dev
,
472 "INVALID COMBINATION: width=%d addrlen=%d hp=%d\n",
474 } else if (qspi
->xfer_mode
.width
!= width
||
475 qspi
->xfer_mode
.addrlen
!= addrlen
||
476 qspi
->xfer_mode
.hp
!= hp
) {
477 qspi
->xfer_mode
.width
= width
;
478 qspi
->xfer_mode
.addrlen
= addrlen
;
479 qspi
->xfer_mode
.hp
= hp
;
480 dev_dbg(&qspi
->pdev
->dev
,
481 "cs:%d %d-lane output, %d-byte address%s\n",
483 qspi
->xfer_mode
.width
,
484 qspi
->xfer_mode
.addrlen
,
485 qspi
->xfer_mode
.hp
!= -1 ? ", hp mode" : "");
491 static void bcm_qspi_enable_bspi(struct bcm_qspi
*qspi
)
496 qspi
->bspi_enabled
= 1;
497 if ((bcm_qspi_read(qspi
, BSPI
, BSPI_MAST_N_BOOT_CTRL
) & 1) == 0)
500 bcm_qspi_bspi_flush_prefetch_buffers(qspi
);
502 bcm_qspi_write(qspi
, BSPI
, BSPI_MAST_N_BOOT_CTRL
, 0);
506 static void bcm_qspi_disable_bspi(struct bcm_qspi
*qspi
)
511 qspi
->bspi_enabled
= 0;
512 if ((bcm_qspi_read(qspi
, BSPI
, BSPI_MAST_N_BOOT_CTRL
) & 1))
515 bcm_qspi_bspi_busy_poll(qspi
);
516 bcm_qspi_write(qspi
, BSPI
, BSPI_MAST_N_BOOT_CTRL
, 1);
520 static void bcm_qspi_chip_select(struct bcm_qspi
*qspi
, int cs
)
525 if (qspi
->base
[CHIP_SELECT
]) {
526 rd
= bcm_qspi_read(qspi
, CHIP_SELECT
, 0);
527 wr
= (rd
& ~0xff) | (1 << cs
);
530 bcm_qspi_write(qspi
, CHIP_SELECT
, 0, wr
);
531 usleep_range(10, 20);
534 dev_dbg(&qspi
->pdev
->dev
, "using cs:%d\n", cs
);
539 static void bcm_qspi_hw_set_parms(struct bcm_qspi
*qspi
,
540 const struct bcm_qspi_parms
*xp
)
545 spbr
= qspi
->base_clk
/ (2 * xp
->speed_hz
);
547 spcr
= clamp_val(spbr
, QSPI_SPBR_MIN
, QSPI_SPBR_MAX
);
548 bcm_qspi_write(qspi
, MSPI
, MSPI_SPCR0_LSB
, spcr
);
550 spcr
= MSPI_MASTER_BIT
;
551 /* for 16 bit the data should be zero */
552 if (xp
->bits_per_word
!= 16)
553 spcr
|= xp
->bits_per_word
<< 2;
554 spcr
|= xp
->mode
& 3;
555 bcm_qspi_write(qspi
, MSPI
, MSPI_SPCR0_MSB
, spcr
);
557 qspi
->last_parms
= *xp
;
560 static void bcm_qspi_update_parms(struct bcm_qspi
*qspi
,
561 struct spi_device
*spi
,
562 struct spi_transfer
*trans
)
564 struct bcm_qspi_parms xp
;
566 xp
.speed_hz
= trans
->speed_hz
;
567 xp
.bits_per_word
= trans
->bits_per_word
;
570 bcm_qspi_hw_set_parms(qspi
, &xp
);
573 static int bcm_qspi_setup(struct spi_device
*spi
)
575 struct bcm_qspi_parms
*xp
;
577 if (spi
->bits_per_word
> 16)
580 xp
= spi_get_ctldata(spi
);
582 xp
= kzalloc(sizeof(*xp
), GFP_KERNEL
);
585 spi_set_ctldata(spi
, xp
);
587 xp
->speed_hz
= spi
->max_speed_hz
;
588 xp
->mode
= spi
->mode
;
590 if (spi
->bits_per_word
)
591 xp
->bits_per_word
= spi
->bits_per_word
;
593 xp
->bits_per_word
= 8;
598 static bool bcm_qspi_mspi_transfer_is_last(struct bcm_qspi
*qspi
,
599 struct qspi_trans
*qt
)
601 if (qt
->mspi_last_trans
&&
602 spi_transfer_is_last(qspi
->master
, qt
->trans
))
608 static int update_qspi_trans_byte_count(struct bcm_qspi
*qspi
,
609 struct qspi_trans
*qt
, int flags
)
611 int ret
= TRANS_STATUS_BREAK_NONE
;
613 /* count the last transferred bytes */
614 if (qt
->trans
->bits_per_word
<= 8)
619 if (qt
->byte
>= qt
->trans
->len
) {
620 /* we're at the end of the spi_transfer */
621 /* in TX mode, need to pause for a delay or CS change */
622 if (qt
->trans
->delay_usecs
&&
623 (flags
& TRANS_STATUS_BREAK_DELAY
))
624 ret
|= TRANS_STATUS_BREAK_DELAY
;
625 if (qt
->trans
->cs_change
&&
626 (flags
& TRANS_STATUS_BREAK_CS_CHANGE
))
627 ret
|= TRANS_STATUS_BREAK_CS_CHANGE
;
631 dev_dbg(&qspi
->pdev
->dev
, "advance msg exit\n");
632 if (bcm_qspi_mspi_transfer_is_last(qspi
, qt
))
633 ret
= TRANS_STATUS_BREAK_EOM
;
635 ret
= TRANS_STATUS_BREAK_NO_BYTES
;
641 dev_dbg(&qspi
->pdev
->dev
, "trans %p len %d byte %d ret %x\n",
642 qt
->trans
, qt
->trans
? qt
->trans
->len
: 0, qt
->byte
, ret
);
646 static inline u8
read_rxram_slot_u8(struct bcm_qspi
*qspi
, int slot
)
648 u32 slot_offset
= MSPI_RXRAM
+ (slot
<< 3) + 0x4;
650 /* mask out reserved bits */
651 return bcm_qspi_read(qspi
, MSPI
, slot_offset
) & 0xff;
654 static inline u16
read_rxram_slot_u16(struct bcm_qspi
*qspi
, int slot
)
656 u32 reg_offset
= MSPI_RXRAM
;
657 u32 lsb_offset
= reg_offset
+ (slot
<< 3) + 0x4;
658 u32 msb_offset
= reg_offset
+ (slot
<< 3);
660 return (bcm_qspi_read(qspi
, MSPI
, lsb_offset
) & 0xff) |
661 ((bcm_qspi_read(qspi
, MSPI
, msb_offset
) & 0xff) << 8);
664 static void read_from_hw(struct bcm_qspi
*qspi
, int slots
)
666 struct qspi_trans tp
;
669 bcm_qspi_disable_bspi(qspi
);
671 if (slots
> MSPI_NUM_CDRAM
) {
672 /* should never happen */
673 dev_err(&qspi
->pdev
->dev
, "%s: too many slots!\n", __func__
);
677 tp
= qspi
->trans_pos
;
679 for (slot
= 0; slot
< slots
; slot
++) {
680 if (tp
.trans
->bits_per_word
<= 8) {
681 u8
*buf
= tp
.trans
->rx_buf
;
684 buf
[tp
.byte
] = read_rxram_slot_u8(qspi
, slot
);
685 dev_dbg(&qspi
->pdev
->dev
, "RD %02x\n",
686 buf
? buf
[tp
.byte
] : 0xff);
688 u16
*buf
= tp
.trans
->rx_buf
;
691 buf
[tp
.byte
/ 2] = read_rxram_slot_u16(qspi
,
693 dev_dbg(&qspi
->pdev
->dev
, "RD %04x\n",
694 buf
? buf
[tp
.byte
] : 0xffff);
697 update_qspi_trans_byte_count(qspi
, &tp
,
698 TRANS_STATUS_BREAK_NONE
);
701 qspi
->trans_pos
= tp
;
704 static inline void write_txram_slot_u8(struct bcm_qspi
*qspi
, int slot
,
707 u32 reg_offset
= MSPI_TXRAM
+ (slot
<< 3);
709 /* mask out reserved bits */
710 bcm_qspi_write(qspi
, MSPI
, reg_offset
, val
);
713 static inline void write_txram_slot_u16(struct bcm_qspi
*qspi
, int slot
,
716 u32 reg_offset
= MSPI_TXRAM
;
717 u32 msb_offset
= reg_offset
+ (slot
<< 3);
718 u32 lsb_offset
= reg_offset
+ (slot
<< 3) + 0x4;
720 bcm_qspi_write(qspi
, MSPI
, msb_offset
, (val
>> 8));
721 bcm_qspi_write(qspi
, MSPI
, lsb_offset
, (val
& 0xff));
724 static inline u32
read_cdram_slot(struct bcm_qspi
*qspi
, int slot
)
726 return bcm_qspi_read(qspi
, MSPI
, MSPI_CDRAM
+ (slot
<< 2));
729 static inline void write_cdram_slot(struct bcm_qspi
*qspi
, int slot
, u32 val
)
731 bcm_qspi_write(qspi
, MSPI
, (MSPI_CDRAM
+ (slot
<< 2)), val
);
734 /* Return number of slots written */
735 static int write_to_hw(struct bcm_qspi
*qspi
, struct spi_device
*spi
)
737 struct qspi_trans tp
;
738 int slot
= 0, tstatus
= 0;
741 bcm_qspi_disable_bspi(qspi
);
742 tp
= qspi
->trans_pos
;
743 bcm_qspi_update_parms(qspi
, spi
, tp
.trans
);
745 /* Run until end of transfer or reached the max data */
746 while (!tstatus
&& slot
< MSPI_NUM_CDRAM
) {
747 if (tp
.trans
->bits_per_word
<= 8) {
748 const u8
*buf
= tp
.trans
->tx_buf
;
749 u8 val
= buf
? buf
[tp
.byte
] : 0xff;
751 write_txram_slot_u8(qspi
, slot
, val
);
752 dev_dbg(&qspi
->pdev
->dev
, "WR %02x\n", val
);
754 const u16
*buf
= tp
.trans
->tx_buf
;
755 u16 val
= buf
? buf
[tp
.byte
/ 2] : 0xffff;
757 write_txram_slot_u16(qspi
, slot
, val
);
758 dev_dbg(&qspi
->pdev
->dev
, "WR %04x\n", val
);
760 mspi_cdram
= MSPI_CDRAM_CONT_BIT
;
765 mspi_cdram
|= (~(1 << spi
->chip_select
) &
768 mspi_cdram
|= ((tp
.trans
->bits_per_word
<= 8) ? 0 :
769 MSPI_CDRAM_BITSE_BIT
);
771 write_cdram_slot(qspi
, slot
, mspi_cdram
);
773 tstatus
= update_qspi_trans_byte_count(qspi
, &tp
,
774 TRANS_STATUS_BREAK_TX
);
779 dev_err(&qspi
->pdev
->dev
, "%s: no data to send?", __func__
);
783 dev_dbg(&qspi
->pdev
->dev
, "submitting %d slots\n", slot
);
784 bcm_qspi_write(qspi
, MSPI
, MSPI_NEWQP
, 0);
785 bcm_qspi_write(qspi
, MSPI
, MSPI_ENDQP
, slot
- 1);
787 if (tstatus
& TRANS_STATUS_BREAK_DESELECT
) {
788 mspi_cdram
= read_cdram_slot(qspi
, slot
- 1) &
789 ~MSPI_CDRAM_CONT_BIT
;
790 write_cdram_slot(qspi
, slot
- 1, mspi_cdram
);
794 bcm_qspi_write(qspi
, MSPI
, MSPI_WRITE_LOCK
, 1);
796 /* Must flush previous writes before starting MSPI operation */
798 /* Set cont | spe | spifie */
799 bcm_qspi_write(qspi
, MSPI
, MSPI_SPCR2
, 0xe0);
805 static int bcm_qspi_bspi_flash_read(struct spi_device
*spi
,
806 struct spi_flash_read_message
*msg
)
808 struct bcm_qspi
*qspi
= spi_master_get_devdata(spi
->master
);
809 u32 addr
= 0, len
, rdlen
, len_words
;
811 unsigned long timeo
= msecs_to_jiffies(100);
812 struct bcm_qspi_soc_intc
*soc_intc
= qspi
->soc_intc
;
814 if (bcm_qspi_bspi_ver_three(qspi
))
815 if (msg
->addr_width
== BSPI_ADDRLEN_4BYTES
)
818 bcm_qspi_chip_select(qspi
, spi
->chip_select
);
819 bcm_qspi_write(qspi
, MSPI
, MSPI_WRITE_LOCK
, 0);
822 * when using flex mode we need to send
823 * the upper address byte to bspi
825 if (bcm_qspi_bspi_ver_three(qspi
) == false) {
826 addr
= msg
->from
& 0xff000000;
827 bcm_qspi_write(qspi
, BSPI
,
828 BSPI_BSPI_FLASH_UPPER_ADDR_BYTE
, addr
);
831 if (!qspi
->xfer_mode
.flex_mode
)
834 addr
= msg
->from
& 0x00ffffff;
836 if (bcm_qspi_bspi_ver_three(qspi
) == true)
837 addr
= (addr
+ 0xc00000) & 0xffffff;
840 * read into the entire buffer by breaking the reads
841 * into RAF buffer read lengths
844 qspi
->bspi_rf_msg_idx
= 0;
847 if (len
> BSPI_READ_LENGTH
)
848 rdlen
= BSPI_READ_LENGTH
;
852 reinit_completion(&qspi
->bspi_done
);
853 bcm_qspi_enable_bspi(qspi
);
854 len_words
= (rdlen
+ 3) >> 2;
855 qspi
->bspi_rf_msg
= msg
;
856 qspi
->bspi_rf_msg_status
= 0;
857 qspi
->bspi_rf_msg_len
= rdlen
;
858 dev_dbg(&qspi
->pdev
->dev
,
859 "bspi xfr addr 0x%x len 0x%x", addr
, rdlen
);
860 bcm_qspi_write(qspi
, BSPI
, BSPI_RAF_START_ADDR
, addr
);
861 bcm_qspi_write(qspi
, BSPI
, BSPI_RAF_NUM_WORDS
, len_words
);
862 bcm_qspi_write(qspi
, BSPI
, BSPI_RAF_WATERMARK
, 0);
863 if (qspi
->soc_intc
) {
865 * clear soc MSPI and BSPI interrupts and enable
868 soc_intc
->bcm_qspi_int_ack(soc_intc
, MSPI_BSPI_DONE
);
869 soc_intc
->bcm_qspi_int_set(soc_intc
, BSPI_DONE
, true);
872 /* Must flush previous writes before starting BSPI operation */
874 bcm_qspi_bspi_lr_start(qspi
);
875 if (!wait_for_completion_timeout(&qspi
->bspi_done
, timeo
)) {
876 dev_err(&qspi
->pdev
->dev
, "timeout waiting for BSPI\n");
881 /* set msg return length */
882 msg
->retlen
+= rdlen
;
890 static int bcm_qspi_transfer_one(struct spi_master
*master
,
891 struct spi_device
*spi
,
892 struct spi_transfer
*trans
)
894 struct bcm_qspi
*qspi
= spi_master_get_devdata(master
);
896 unsigned long timeo
= msecs_to_jiffies(100);
898 bcm_qspi_chip_select(qspi
, spi
->chip_select
);
899 qspi
->trans_pos
.trans
= trans
;
900 qspi
->trans_pos
.byte
= 0;
902 while (qspi
->trans_pos
.byte
< trans
->len
) {
903 reinit_completion(&qspi
->mspi_done
);
905 slots
= write_to_hw(qspi
, spi
);
906 if (!wait_for_completion_timeout(&qspi
->mspi_done
, timeo
)) {
907 dev_err(&qspi
->pdev
->dev
, "timeout waiting for MSPI\n");
911 read_from_hw(qspi
, slots
);
917 static int bcm_qspi_mspi_flash_read(struct spi_device
*spi
,
918 struct spi_flash_read_message
*msg
)
920 struct bcm_qspi
*qspi
= spi_master_get_devdata(spi
->master
);
921 struct spi_transfer t
[2];
925 memset(cmd
, 0, sizeof(cmd
));
926 memset(t
, 0, sizeof(t
));
929 /* opcode is in cmd[0] */
930 cmd
[0] = msg
->read_opcode
;
931 cmd
[1] = msg
->from
>> (msg
->addr_width
* 8 - 8);
932 cmd
[2] = msg
->from
>> (msg
->addr_width
* 8 - 16);
933 cmd
[3] = msg
->from
>> (msg
->addr_width
* 8 - 24);
934 cmd
[4] = msg
->from
>> (msg
->addr_width
* 8 - 32);
936 t
[0].len
= msg
->addr_width
+ msg
->dummy_bytes
+ 1;
937 t
[0].bits_per_word
= spi
->bits_per_word
;
938 t
[0].tx_nbits
= msg
->opcode_nbits
;
939 /* lets mspi know that this is not last transfer */
940 qspi
->trans_pos
.mspi_last_trans
= false;
941 ret
= bcm_qspi_transfer_one(spi
->master
, spi
, &t
[0]);
944 qspi
->trans_pos
.mspi_last_trans
= true;
947 t
[1].rx_buf
= msg
->buf
;
949 t
[1].rx_nbits
= msg
->data_nbits
;
950 t
[1].bits_per_word
= spi
->bits_per_word
;
951 ret
= bcm_qspi_transfer_one(spi
->master
, spi
, &t
[1]);
955 msg
->retlen
= msg
->len
;
960 static int bcm_qspi_flash_read(struct spi_device
*spi
,
961 struct spi_flash_read_message
*msg
)
963 struct bcm_qspi
*qspi
= spi_master_get_devdata(spi
->master
);
965 bool mspi_read
= false;
973 if (bcm_qspi_bspi_ver_three(qspi
) == true) {
975 * The address coming into this function is a raw flash offset.
976 * But for BSPI <= V3, we need to convert it to a remapped BSPI
977 * address. If it crosses a 4MB boundary, just revert back to
980 addr
= (addr
+ 0xc00000) & 0xffffff;
982 if ((~ADDR_4MB_MASK
& addr
) ^
983 (~ADDR_4MB_MASK
& (addr
+ len
- 1)))
987 /* non-aligned and very short transfers are handled by MSPI */
988 if (!IS_ALIGNED((uintptr_t)addr
, 4) || !IS_ALIGNED((uintptr_t)buf
, 4) ||
993 return bcm_qspi_mspi_flash_read(spi
, msg
);
995 ret
= bcm_qspi_bspi_set_mode(qspi
, msg
, -1);
998 ret
= bcm_qspi_bspi_flash_read(spi
, msg
);
1003 static void bcm_qspi_cleanup(struct spi_device
*spi
)
1005 struct bcm_qspi_parms
*xp
= spi_get_ctldata(spi
);
1010 static irqreturn_t
bcm_qspi_mspi_l2_isr(int irq
, void *dev_id
)
1012 struct bcm_qspi_dev_id
*qspi_dev_id
= dev_id
;
1013 struct bcm_qspi
*qspi
= qspi_dev_id
->dev
;
1014 u32 status
= bcm_qspi_read(qspi
, MSPI
, MSPI_MSPI_STATUS
);
1016 if (status
& MSPI_MSPI_STATUS_SPIF
) {
1017 struct bcm_qspi_soc_intc
*soc_intc
= qspi
->soc_intc
;
1018 /* clear interrupt */
1019 status
&= ~MSPI_MSPI_STATUS_SPIF
;
1020 bcm_qspi_write(qspi
, MSPI
, MSPI_MSPI_STATUS
, status
);
1022 soc_intc
->bcm_qspi_int_ack(soc_intc
, MSPI_DONE
);
1023 complete(&qspi
->mspi_done
);
1030 static irqreturn_t
bcm_qspi_bspi_lr_l2_isr(int irq
, void *dev_id
)
1032 struct bcm_qspi_dev_id
*qspi_dev_id
= dev_id
;
1033 struct bcm_qspi
*qspi
= qspi_dev_id
->dev
;
1034 struct bcm_qspi_soc_intc
*soc_intc
= qspi
->soc_intc
;
1035 u32 status
= qspi_dev_id
->irqp
->mask
;
1037 if (qspi
->bspi_enabled
&& qspi
->bspi_rf_msg
) {
1038 bcm_qspi_bspi_lr_data_read(qspi
);
1039 if (qspi
->bspi_rf_msg_len
== 0) {
1040 qspi
->bspi_rf_msg
= NULL
;
1041 if (qspi
->soc_intc
) {
1042 /* disable soc BSPI interrupt */
1043 soc_intc
->bcm_qspi_int_set(soc_intc
, BSPI_DONE
,
1046 status
= INTR_BSPI_LR_SESSION_DONE_MASK
;
1049 if (qspi
->bspi_rf_msg_status
)
1050 bcm_qspi_bspi_lr_clear(qspi
);
1052 bcm_qspi_bspi_flush_prefetch_buffers(qspi
);
1056 /* clear soc BSPI interrupt */
1057 soc_intc
->bcm_qspi_int_ack(soc_intc
, BSPI_DONE
);
1060 status
&= INTR_BSPI_LR_SESSION_DONE_MASK
;
1061 if (qspi
->bspi_enabled
&& status
&& qspi
->bspi_rf_msg_len
== 0)
1062 complete(&qspi
->bspi_done
);
1067 static irqreturn_t
bcm_qspi_bspi_lr_err_l2_isr(int irq
, void *dev_id
)
1069 struct bcm_qspi_dev_id
*qspi_dev_id
= dev_id
;
1070 struct bcm_qspi
*qspi
= qspi_dev_id
->dev
;
1071 struct bcm_qspi_soc_intc
*soc_intc
= qspi
->soc_intc
;
1073 dev_err(&qspi
->pdev
->dev
, "BSPI INT error\n");
1074 qspi
->bspi_rf_msg_status
= -EIO
;
1076 /* clear soc interrupt */
1077 soc_intc
->bcm_qspi_int_ack(soc_intc
, BSPI_ERR
);
1079 complete(&qspi
->bspi_done
);
1083 static irqreturn_t
bcm_qspi_l1_isr(int irq
, void *dev_id
)
1085 struct bcm_qspi_dev_id
*qspi_dev_id
= dev_id
;
1086 struct bcm_qspi
*qspi
= qspi_dev_id
->dev
;
1087 struct bcm_qspi_soc_intc
*soc_intc
= qspi
->soc_intc
;
1088 irqreturn_t ret
= IRQ_NONE
;
1091 u32 status
= soc_intc
->bcm_qspi_get_int_status(soc_intc
);
1093 if (status
& MSPI_DONE
)
1094 ret
= bcm_qspi_mspi_l2_isr(irq
, dev_id
);
1095 else if (status
& BSPI_DONE
)
1096 ret
= bcm_qspi_bspi_lr_l2_isr(irq
, dev_id
);
1097 else if (status
& BSPI_ERR
)
1098 ret
= bcm_qspi_bspi_lr_err_l2_isr(irq
, dev_id
);
1104 static const struct bcm_qspi_irq qspi_irq_tab
[] = {
1106 .irq_name
= "spi_lr_fullness_reached",
1107 .irq_handler
= bcm_qspi_bspi_lr_l2_isr
,
1108 .mask
= INTR_BSPI_LR_FULLNESS_REACHED_MASK
,
1111 .irq_name
= "spi_lr_session_aborted",
1112 .irq_handler
= bcm_qspi_bspi_lr_err_l2_isr
,
1113 .mask
= INTR_BSPI_LR_SESSION_ABORTED_MASK
,
1116 .irq_name
= "spi_lr_impatient",
1117 .irq_handler
= bcm_qspi_bspi_lr_err_l2_isr
,
1118 .mask
= INTR_BSPI_LR_IMPATIENT_MASK
,
1121 .irq_name
= "spi_lr_session_done",
1122 .irq_handler
= bcm_qspi_bspi_lr_l2_isr
,
1123 .mask
= INTR_BSPI_LR_SESSION_DONE_MASK
,
1125 #ifdef QSPI_INT_DEBUG
1126 /* this interrupt is for debug purposes only, dont request irq */
1128 .irq_name
= "spi_lr_overread",
1129 .irq_handler
= bcm_qspi_bspi_lr_err_l2_isr
,
1130 .mask
= INTR_BSPI_LR_OVERREAD_MASK
,
1134 .irq_name
= "mspi_done",
1135 .irq_handler
= bcm_qspi_mspi_l2_isr
,
1136 .mask
= INTR_MSPI_DONE_MASK
,
1139 .irq_name
= "mspi_halted",
1140 .irq_handler
= bcm_qspi_mspi_l2_isr
,
1141 .mask
= INTR_MSPI_HALTED_MASK
,
1144 /* single muxed L1 interrupt source */
1145 .irq_name
= "spi_l1_intr",
1146 .irq_handler
= bcm_qspi_l1_isr
,
1147 .irq_source
= MUXED_L1
,
1148 .mask
= QSPI_INTERRUPTS_ALL
,
1152 static void bcm_qspi_bspi_init(struct bcm_qspi
*qspi
)
1156 val
= bcm_qspi_read(qspi
, BSPI
, BSPI_REVISION_ID
);
1157 qspi
->bspi_maj_rev
= (val
>> 8) & 0xff;
1158 qspi
->bspi_min_rev
= val
& 0xff;
1159 if (!(bcm_qspi_bspi_ver_three(qspi
))) {
1160 /* Force mapping of BSPI address -> flash offset */
1161 bcm_qspi_write(qspi
, BSPI
, BSPI_BSPI_XOR_VALUE
, 0);
1162 bcm_qspi_write(qspi
, BSPI
, BSPI_BSPI_XOR_ENABLE
, 1);
1164 qspi
->bspi_enabled
= 1;
1165 bcm_qspi_disable_bspi(qspi
);
1166 bcm_qspi_write(qspi
, BSPI
, BSPI_B0_CTRL
, 0);
1167 bcm_qspi_write(qspi
, BSPI
, BSPI_B1_CTRL
, 0);
1170 static void bcm_qspi_hw_init(struct bcm_qspi
*qspi
)
1172 struct bcm_qspi_parms parms
;
1174 bcm_qspi_write(qspi
, MSPI
, MSPI_SPCR1_LSB
, 0);
1175 bcm_qspi_write(qspi
, MSPI
, MSPI_SPCR1_MSB
, 0);
1176 bcm_qspi_write(qspi
, MSPI
, MSPI_NEWQP
, 0);
1177 bcm_qspi_write(qspi
, MSPI
, MSPI_ENDQP
, 0);
1178 bcm_qspi_write(qspi
, MSPI
, MSPI_SPCR2
, 0x20);
1180 parms
.mode
= SPI_MODE_3
;
1181 parms
.bits_per_word
= 8;
1182 parms
.speed_hz
= qspi
->max_speed_hz
;
1183 bcm_qspi_hw_set_parms(qspi
, &parms
);
1186 bcm_qspi_bspi_init(qspi
);
1189 static void bcm_qspi_hw_uninit(struct bcm_qspi
*qspi
)
1191 bcm_qspi_write(qspi
, MSPI
, MSPI_SPCR2
, 0);
1193 bcm_qspi_write(qspi
, MSPI
, MSPI_WRITE_LOCK
, 0);
1197 static const struct of_device_id bcm_qspi_of_match
[] = {
1198 { .compatible
= "brcm,spi-bcm-qspi" },
1201 MODULE_DEVICE_TABLE(of
, bcm_qspi_of_match
);
1203 int bcm_qspi_probe(struct platform_device
*pdev
,
1204 struct bcm_qspi_soc_intc
*soc_intc
)
1206 struct device
*dev
= &pdev
->dev
;
1207 struct bcm_qspi
*qspi
;
1208 struct spi_master
*master
;
1209 struct resource
*res
;
1210 int irq
, ret
= 0, num_ints
= 0;
1212 const char *name
= NULL
;
1213 int num_irqs
= ARRAY_SIZE(qspi_irq_tab
);
1215 /* We only support device-tree instantiation */
1219 if (!of_match_node(bcm_qspi_of_match
, dev
->of_node
))
1222 master
= spi_alloc_master(dev
, sizeof(struct bcm_qspi
));
1224 dev_err(dev
, "error allocating spi_master\n");
1228 qspi
= spi_master_get_devdata(master
);
1230 qspi
->trans_pos
.trans
= NULL
;
1231 qspi
->trans_pos
.byte
= 0;
1232 qspi
->trans_pos
.mspi_last_trans
= true;
1233 qspi
->master
= master
;
1235 master
->bus_num
= -1;
1236 master
->mode_bits
= SPI_CPHA
| SPI_CPOL
| SPI_RX_DUAL
| SPI_RX_QUAD
;
1237 master
->setup
= bcm_qspi_setup
;
1238 master
->transfer_one
= bcm_qspi_transfer_one
;
1239 master
->spi_flash_read
= bcm_qspi_flash_read
;
1240 master
->cleanup
= bcm_qspi_cleanup
;
1241 master
->dev
.of_node
= dev
->of_node
;
1242 master
->num_chipselect
= NUM_CHIPSELECT
;
1244 qspi
->big_endian
= of_device_is_big_endian(dev
->of_node
);
1246 if (!of_property_read_u32(dev
->of_node
, "num-cs", &val
))
1247 master
->num_chipselect
= val
;
1249 res
= platform_get_resource_byname(pdev
, IORESOURCE_MEM
, "hif_mspi");
1251 res
= platform_get_resource_byname(pdev
, IORESOURCE_MEM
,
1255 qspi
->base
[MSPI
] = devm_ioremap_resource(dev
, res
);
1256 if (IS_ERR(qspi
->base
[MSPI
])) {
1257 ret
= PTR_ERR(qspi
->base
[MSPI
]);
1258 goto qspi_probe_err
;
1261 goto qspi_resource_err
;
1264 res
= platform_get_resource_byname(pdev
, IORESOURCE_MEM
, "bspi");
1266 qspi
->base
[BSPI
] = devm_ioremap_resource(dev
, res
);
1267 if (IS_ERR(qspi
->base
[BSPI
])) {
1268 ret
= PTR_ERR(qspi
->base
[BSPI
]);
1269 goto qspi_probe_err
;
1271 qspi
->bspi_mode
= true;
1273 qspi
->bspi_mode
= false;
1276 dev_info(dev
, "using %smspi mode\n", qspi
->bspi_mode
? "bspi-" : "");
1278 res
= platform_get_resource_byname(pdev
, IORESOURCE_MEM
, "cs_reg");
1280 qspi
->base
[CHIP_SELECT
] = devm_ioremap_resource(dev
, res
);
1281 if (IS_ERR(qspi
->base
[CHIP_SELECT
])) {
1282 ret
= PTR_ERR(qspi
->base
[CHIP_SELECT
]);
1283 goto qspi_resource_err
;
1287 qspi
->dev_ids
= kcalloc(num_irqs
, sizeof(struct bcm_qspi_dev_id
),
1289 if (!qspi
->dev_ids
) {
1291 goto qspi_resource_err
;
1294 for (val
= 0; val
< num_irqs
; val
++) {
1296 name
= qspi_irq_tab
[val
].irq_name
;
1297 if (qspi_irq_tab
[val
].irq_source
== SINGLE_L2
) {
1298 /* get the l2 interrupts */
1299 irq
= platform_get_irq_byname(pdev
, name
);
1300 } else if (!num_ints
&& soc_intc
) {
1301 /* all mspi, bspi intrs muxed to one L1 intr */
1302 irq
= platform_get_irq(pdev
, 0);
1306 ret
= devm_request_irq(&pdev
->dev
, irq
,
1307 qspi_irq_tab
[val
].irq_handler
, 0,
1309 &qspi
->dev_ids
[val
]);
1311 dev_err(&pdev
->dev
, "IRQ %s not found\n", name
);
1312 goto qspi_probe_err
;
1315 qspi
->dev_ids
[val
].dev
= qspi
;
1316 qspi
->dev_ids
[val
].irqp
= &qspi_irq_tab
[val
];
1318 dev_dbg(&pdev
->dev
, "registered IRQ %s %d\n",
1319 qspi_irq_tab
[val
].irq_name
,
1325 dev_err(&pdev
->dev
, "no IRQs registered, cannot init driver\n");
1327 goto qspi_probe_err
;
1331 * Some SoCs integrate spi controller (e.g., its interrupt bits)
1335 qspi
->soc_intc
= soc_intc
;
1336 soc_intc
->bcm_qspi_int_set(soc_intc
, MSPI_DONE
, true);
1338 qspi
->soc_intc
= NULL
;
1341 qspi
->clk
= devm_clk_get(&pdev
->dev
, NULL
);
1342 if (IS_ERR(qspi
->clk
)) {
1343 dev_warn(dev
, "unable to get clock\n");
1344 ret
= PTR_ERR(qspi
->clk
);
1345 goto qspi_probe_err
;
1348 ret
= clk_prepare_enable(qspi
->clk
);
1350 dev_err(dev
, "failed to prepare clock\n");
1351 goto qspi_probe_err
;
1354 qspi
->base_clk
= clk_get_rate(qspi
->clk
);
1355 qspi
->max_speed_hz
= qspi
->base_clk
/ (QSPI_SPBR_MIN
* 2);
1357 bcm_qspi_hw_init(qspi
);
1358 init_completion(&qspi
->mspi_done
);
1359 init_completion(&qspi
->bspi_done
);
1362 platform_set_drvdata(pdev
, qspi
);
1364 qspi
->xfer_mode
.width
= -1;
1365 qspi
->xfer_mode
.addrlen
= -1;
1366 qspi
->xfer_mode
.hp
= -1;
1368 ret
= devm_spi_register_master(&pdev
->dev
, master
);
1370 dev_err(dev
, "can't register master\n");
1377 bcm_qspi_hw_uninit(qspi
);
1378 clk_disable_unprepare(qspi
->clk
);
1380 kfree(qspi
->dev_ids
);
1382 spi_master_put(master
);
1385 /* probe function to be called by SoC specific platform driver probe */
1386 EXPORT_SYMBOL_GPL(bcm_qspi_probe
);
1388 int bcm_qspi_remove(struct platform_device
*pdev
)
1390 struct bcm_qspi
*qspi
= platform_get_drvdata(pdev
);
1392 bcm_qspi_hw_uninit(qspi
);
1393 clk_disable_unprepare(qspi
->clk
);
1394 kfree(qspi
->dev_ids
);
1395 spi_unregister_master(qspi
->master
);
1399 /* function to be called by SoC specific platform driver remove() */
1400 EXPORT_SYMBOL_GPL(bcm_qspi_remove
);
1402 static int __maybe_unused
bcm_qspi_suspend(struct device
*dev
)
1404 struct bcm_qspi
*qspi
= dev_get_drvdata(dev
);
1406 /* store the override strap value */
1407 if (!bcm_qspi_bspi_ver_three(qspi
))
1408 qspi
->s3_strap_override_ctrl
=
1409 bcm_qspi_read(qspi
, BSPI
, BSPI_STRAP_OVERRIDE_CTRL
);
1411 spi_master_suspend(qspi
->master
);
1412 clk_disable(qspi
->clk
);
1413 bcm_qspi_hw_uninit(qspi
);
1418 static int __maybe_unused
bcm_qspi_resume(struct device
*dev
)
1420 struct bcm_qspi
*qspi
= dev_get_drvdata(dev
);
1423 bcm_qspi_hw_init(qspi
);
1424 bcm_qspi_chip_select(qspi
, qspi
->curr_cs
);
1426 /* enable MSPI interrupt */
1427 qspi
->soc_intc
->bcm_qspi_int_set(qspi
->soc_intc
, MSPI_DONE
,
1430 ret
= clk_enable(qspi
->clk
);
1432 spi_master_resume(qspi
->master
);
1437 SIMPLE_DEV_PM_OPS(bcm_qspi_pm_ops
, bcm_qspi_suspend
, bcm_qspi_resume
);
1439 /* pm_ops to be called by SoC specific platform driver */
1440 EXPORT_SYMBOL_GPL(bcm_qspi_pm_ops
);
1442 MODULE_AUTHOR("Kamal Dasu");
1443 MODULE_DESCRIPTION("Broadcom QSPI driver");
1444 MODULE_LICENSE("GPL v2");
1445 MODULE_ALIAS("platform:" DRIVER_NAME
);