Linux 4.16.11

[linux/fpc-iii.git] / drivers / tty / hvc / hvc_console.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
 * Copyright (C) 2001 Paul Mackerras <paulus@au.ibm.com>, IBM
 * Copyright (C) 2004 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
 * Copyright (C) 2004 IBM Corporation
 *
 * Additional Author(s):
 *  Ryan S. Arnold <rsa@us.ibm.com>
 */

#include <linux/console.h>
#include <linux/cpumask.h>
#include <linux/init.h>
#include <linux/kbd_kern.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/list.h>
#include <linux/major.h>
#include <linux/atomic.h>
#include <linux/sysrq.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/freezer.h>
#include <linux/slab.h>
#include <linux/serial_core.h>

#include <linux/uaccess.h>

#include "hvc_console.h"

#define HVC_MAJOR       229
#define HVC_MINOR       0

/*
 * Wait this long per iteration while trying to push buffered data to the
 * hypervisor before allowing the tty to complete a close operation.
 */
#define HVC_CLOSE_WAIT (HZ/100) /* 1/10 of a second */

/*
 * These sizes are most efficient for vio, because they are the
 * native transfer size. We could make them selectable in the
 * future to better deal with backends that want other buffer sizes.
 */
#define N_OUTBUF        16
#define N_INBUF         16

#define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))

static struct tty_driver *hvc_driver;
static struct task_struct *hvc_task;

/* Picks up late kicks after list walk but before schedule() */
static int hvc_kicked;

/* hvc_init is triggered from hvc_alloc, i.e. only when actually used */
static atomic_t hvc_needs_init __read_mostly = ATOMIC_INIT(-1);

static int hvc_init(void);

#ifdef CONFIG_MAGIC_SYSRQ
static int sysrq_pressed;
#endif

/* dynamic list of hvc_struct instances */
static LIST_HEAD(hvc_structs);

/*
 * Protect the list of hvc_struct instances from inserts and removals during
 * list traversal.
 */
static DEFINE_SPINLOCK(hvc_structs_lock);

/*
 * This value is used to assign a tty->index value to a hvc_struct based
 * upon order of exposure via hvc_probe(), when we can not match it to
 * a console candidate registered with hvc_instantiate().
 */
static int last_hvc = -1;

/*
 * Do not call this function with either the hvc_structs_lock or the hvc_struct
 * lock held.  If successful, this function increments the kref reference
 * count against the target hvc_struct so it should be released when finished.
 */
static struct hvc_struct *hvc_get_by_index(int index)
{
        struct hvc_struct *hp;
        unsigned long flags;

        spin_lock(&hvc_structs_lock);

        list_for_each_entry(hp, &hvc_structs, next) {
                spin_lock_irqsave(&hp->lock, flags);
                if (hp->index == index) {
                        tty_port_get(&hp->port);
                        spin_unlock_irqrestore(&hp->lock, flags);
                        spin_unlock(&hvc_structs_lock);
                        return hp;
                }
                spin_unlock_irqrestore(&hp->lock, flags);
        }
        hp = NULL;

        spin_unlock(&hvc_structs_lock);
        return hp;
}


/*
 * Initial console vtermnos for console API usage prior to full console
 * initialization.  Any vty adapter outside this range will not have usable
 * console interfaces but can still be used as a tty device.  This has to be
 * static because kmalloc will not work during early console init.
 */
static const struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES];
static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] =
        {[0 ... MAX_NR_HVC_CONSOLES - 1] = -1};

/*
 * Console APIs, NOT TTY.  These APIs are available immediately when
 * hvc_console_setup() finds adapters.
 */

static void hvc_console_print(struct console *co, const char *b,
                              unsigned count)
{
        char c[N_OUTBUF] __ALIGNED__;
        unsigned i = 0, n = 0;
        int r, donecr = 0, index = co->index;

        /* Console access attempt outside of acceptable console range. */
        if (index >= MAX_NR_HVC_CONSOLES)
                return;

        /* This console adapter was removed so it is not usable. */
        if (vtermnos[index] == -1)
                return;

        while (count > 0 || i > 0) {
                if (count > 0 && i < sizeof(c)) {
                        if (b[n] == '\n' && !donecr) {
                                c[i++] = '\r';
                                donecr = 1;
                        } else {
                                c[i++] = b[n++];
                                donecr = 0;
                                --count;
                        }
                } else {
                        r = cons_ops[index]->put_chars(vtermnos[index], c, i);
                        if (r <= 0) {
                                /* throw away characters on error
                                 * but spin in case of -EAGAIN */
                                if (r != -EAGAIN)
                                        i = 0;
                        } else if (r > 0) {
                                i -= r;
                                if (i > 0)
                                        memmove(c, c+r, i);
                        }
                }
        }
}

static struct tty_driver *hvc_console_device(struct console *c, int *index)
{
        if (vtermnos[c->index] == -1)
                return NULL;

        *index = c->index;
        return hvc_driver;
}

static int hvc_console_setup(struct console *co, char *options)
{       
        if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES)
                return -ENODEV;

        if (vtermnos[co->index] == -1)
                return -ENODEV;

        return 0;
}

static struct console hvc_console = {
        .name           = "hvc",
        .write          = hvc_console_print,
        .device         = hvc_console_device,
        .setup          = hvc_console_setup,
        .flags          = CON_PRINTBUFFER,
        .index          = -1,
};

/*
 * Early console initialization.  Precedes driver initialization.
 *
 * (1) we are first, and the user specified another driver
 * -- index will remain -1
 * (2) we are first and the user specified no driver
 * -- index will be set to 0, then we will fail setup.
 * (3)  we are first and the user specified our driver
 * -- index will be set to user specified driver, and we will fail
 * (4) we are after driver, and this initcall will register us
 * -- if the user didn't specify a driver then the console will match
 *
 * Note that for cases 2 and 3, we will match later when the io driver
 * calls hvc_instantiate() and call register again.
 */
static int __init hvc_console_init(void)
{
        register_console(&hvc_console);
        return 0;
}
console_initcall(hvc_console_init);

/* callback when the kboject ref count reaches zero. */
static void hvc_port_destruct(struct tty_port *port)
{
        struct hvc_struct *hp = container_of(port, struct hvc_struct, port);
        unsigned long flags;

        spin_lock(&hvc_structs_lock);

        spin_lock_irqsave(&hp->lock, flags);
        list_del(&(hp->next));
        spin_unlock_irqrestore(&hp->lock, flags);

        spin_unlock(&hvc_structs_lock);

        kfree(hp);
}

static void hvc_check_console(int index)
{
        /* Already enabled, bail out */
        if (hvc_console.flags & CON_ENABLED)
                return;

        /* If this index is what the user requested, then register
         * now (setup won't fail at this point).  It's ok to just
         * call register again if previously .setup failed.
         */
        if (index == hvc_console.index)
                register_console(&hvc_console);
}

/*
 * hvc_instantiate() is an early console discovery method which locates
 * consoles * prior to the vio subsystem discovering them.  Hotplugged
 * vty adapters do NOT get an hvc_instantiate() callback since they
 * appear after early console init.
 */
int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops)
{
        struct hvc_struct *hp;

        if (index < 0 || index >= MAX_NR_HVC_CONSOLES)
                return -1;

        if (vtermnos[index] != -1)
                return -1;

        /* make sure no no tty has been registered in this index */
        hp = hvc_get_by_index(index);
        if (hp) {
                tty_port_put(&hp->port);
                return -1;
        }

        vtermnos[index] = vtermno;
        cons_ops[index] = ops;

        /* reserve all indices up to and including this index */
        if (last_hvc < index)
                last_hvc = index;

        /* check if we need to re-register the kernel console */
        hvc_check_console(index);

        return 0;
}
EXPORT_SYMBOL_GPL(hvc_instantiate);

/* Wake the sleeping khvcd */
void hvc_kick(void)
{
        hvc_kicked = 1;
        wake_up_process(hvc_task);
}
EXPORT_SYMBOL_GPL(hvc_kick);

static void hvc_unthrottle(struct tty_struct *tty)
{
        hvc_kick();
}

static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)
{
        struct hvc_struct *hp;
        int rc;

        /* Auto increments kref reference if found. */
        hp = hvc_get_by_index(tty->index);
        if (!hp)
                return -ENODEV;

        tty->driver_data = hp;

        rc = tty_port_install(&hp->port, driver, tty);
        if (rc)
                tty_port_put(&hp->port);
        return rc;
}

/*
 * The TTY interface won't be used until after the vio layer has exposed the vty
 * adapter to the kernel.
 */
static int hvc_open(struct tty_struct *tty, struct file * filp)
{
        struct hvc_struct *hp = tty->driver_data;
        unsigned long flags;
        int rc = 0;

        spin_lock_irqsave(&hp->port.lock, flags);
        /* Check and then increment for fast path open. */
        if (hp->port.count++ > 0) {
                spin_unlock_irqrestore(&hp->port.lock, flags);
                hvc_kick();
                return 0;
        } /* else count == 0 */
        spin_unlock_irqrestore(&hp->port.lock, flags);

        tty_port_tty_set(&hp->port, tty);

        if (hp->ops->notifier_add)
                rc = hp->ops->notifier_add(hp, hp->data);

        /*
         * If the notifier fails we return an error.  The tty layer
         * will call hvc_close() after a failed open but we don't want to clean
         * up there so we'll clean up here and clear out the previously set
         * tty fields and return the kref reference.
         */
        if (rc) {
                tty_port_tty_set(&hp->port, NULL);
                tty->driver_data = NULL;
                tty_port_put(&hp->port);
                printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
        } else
                /* We are ready... raise DTR/RTS */
                if (C_BAUD(tty))
                        if (hp->ops->dtr_rts)
                                hp->ops->dtr_rts(hp, 1);

        /* Force wakeup of the polling thread */
        hvc_kick();

        return rc;
}

static void hvc_close(struct tty_struct *tty, struct file * filp)
{
        struct hvc_struct *hp;
        unsigned long flags;

        if (tty_hung_up_p(filp))
                return;

        /*
         * No driver_data means that this close was issued after a failed
         * hvc_open by the tty layer's release_dev() function and we can just
         * exit cleanly because the kref reference wasn't made.
         */
        if (!tty->driver_data)
                return;

        hp = tty->driver_data;

        spin_lock_irqsave(&hp->port.lock, flags);

        if (--hp->port.count == 0) {
                spin_unlock_irqrestore(&hp->port.lock, flags);
                /* We are done with the tty pointer now. */
                tty_port_tty_set(&hp->port, NULL);

                if (C_HUPCL(tty))
                        if (hp->ops->dtr_rts)
                                hp->ops->dtr_rts(hp, 0);

                if (hp->ops->notifier_del)
                        hp->ops->notifier_del(hp, hp->data);

                /* cancel pending tty resize work */
                cancel_work_sync(&hp->tty_resize);

                /*
                 * Chain calls chars_in_buffer() and returns immediately if
                 * there is no buffered data otherwise sleeps on a wait queue
                 * waking periodically to check chars_in_buffer().
                 */
                tty_wait_until_sent(tty, HVC_CLOSE_WAIT);
        } else {
                if (hp->port.count < 0)
                        printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
                                hp->vtermno, hp->port.count);
                spin_unlock_irqrestore(&hp->port.lock, flags);
        }
}

static void hvc_cleanup(struct tty_struct *tty)
{
        struct hvc_struct *hp = tty->driver_data;

        tty_port_put(&hp->port);
}

static void hvc_hangup(struct tty_struct *tty)
{
        struct hvc_struct *hp = tty->driver_data;
        unsigned long flags;

        if (!hp)
                return;

        /* cancel pending tty resize work */
        cancel_work_sync(&hp->tty_resize);

        spin_lock_irqsave(&hp->port.lock, flags);

        /*
         * The N_TTY line discipline has problems such that in a close vs
         * open->hangup case this can be called after the final close so prevent
         * that from happening for now.
         */
        if (hp->port.count <= 0) {
                spin_unlock_irqrestore(&hp->port.lock, flags);
                return;
        }

        hp->port.count = 0;
        spin_unlock_irqrestore(&hp->port.lock, flags);
        tty_port_tty_set(&hp->port, NULL);

        hp->n_outbuf = 0;

        if (hp->ops->notifier_hangup)
                hp->ops->notifier_hangup(hp, hp->data);
}

/*
 * Push buffered characters whether they were just recently buffered or waiting
 * on a blocked hypervisor.  Call this function with hp->lock held.
 */
static int hvc_push(struct hvc_struct *hp)
{
        int n;

        n = hp->ops->put_chars(hp->vtermno, hp->outbuf, hp->n_outbuf);
        if (n <= 0) {
                if (n == 0 || n == -EAGAIN) {
                        hp->do_wakeup = 1;
                        return 0;
                }
                /* throw away output on error; this happens when
                   there is no session connected to the vterm. */
                hp->n_outbuf = 0;
        } else
                hp->n_outbuf -= n;
        if (hp->n_outbuf > 0)
                memmove(hp->outbuf, hp->outbuf + n, hp->n_outbuf);
        else
                hp->do_wakeup = 1;

        return n;
}

static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
        struct hvc_struct *hp = tty->driver_data;
        unsigned long flags;
        int rsize, written = 0;

        /* This write was probably executed during a tty close. */
        if (!hp)
                return -EPIPE;

        /* FIXME what's this (unprotected) check for? */
        if (hp->port.count <= 0)
                return -EIO;

        spin_lock_irqsave(&hp->lock, flags);

        /* Push pending writes */
        if (hp->n_outbuf > 0)
                hvc_push(hp);

        while (count > 0 && (rsize = hp->outbuf_size - hp->n_outbuf) > 0) {
                if (rsize > count)
                        rsize = count;
                memcpy(hp->outbuf + hp->n_outbuf, buf, rsize);
                count -= rsize;
                buf += rsize;
                hp->n_outbuf += rsize;
                written += rsize;
                hvc_push(hp);
        }
        spin_unlock_irqrestore(&hp->lock, flags);

        /*
         * Racy, but harmless, kick thread if there is still pending data.
         */
        if (hp->n_outbuf)
                hvc_kick();

        return written;
}

/**
 * hvc_set_winsz() - Resize the hvc tty terminal window.
 * @work:       work structure.
 *
 * The routine shall not be called within an atomic context because it
 * might sleep.
 *
 * Locking:     hp->lock
 */
static void hvc_set_winsz(struct work_struct *work)
{
        struct hvc_struct *hp;
        unsigned long hvc_flags;
        struct tty_struct *tty;
        struct winsize ws;

        hp = container_of(work, struct hvc_struct, tty_resize);

        tty = tty_port_tty_get(&hp->port);
        if (!tty)
                return;

        spin_lock_irqsave(&hp->lock, hvc_flags);
        ws = hp->ws;
        spin_unlock_irqrestore(&hp->lock, hvc_flags);

        tty_do_resize(tty, &ws);
        tty_kref_put(tty);
}

/*
 * This is actually a contract between the driver and the tty layer outlining
 * how much write room the driver can guarantee will be sent OR BUFFERED.  This
 * driver MUST honor the return value.
 */
static int hvc_write_room(struct tty_struct *tty)
{
        struct hvc_struct *hp = tty->driver_data;

        if (!hp)
                return 0;

        return hp->outbuf_size - hp->n_outbuf;
}

static int hvc_chars_in_buffer(struct tty_struct *tty)
{
        struct hvc_struct *hp = tty->driver_data;

        if (!hp)
                return 0;
        return hp->n_outbuf;
}

/*
 * timeout will vary between the MIN and MAX values defined here.  By default
 * and during console activity we will use a default MIN_TIMEOUT of 10.  When
 * the console is idle, we increase the timeout value on each pass through
 * msleep until we reach the max.  This may be noticeable as a brief (average
 * one second) delay on the console before the console responds to input when
 * there has been no input for some time.
 */
#define MIN_TIMEOUT             (10)
#define MAX_TIMEOUT             (2000)
static u32 timeout = MIN_TIMEOUT;

#define HVC_POLL_READ   0x00000001
#define HVC_POLL_WRITE  0x00000002

int hvc_poll(struct hvc_struct *hp)
{
        struct tty_struct *tty;
        int i, n, poll_mask = 0;
        char buf[N_INBUF] __ALIGNED__;
        unsigned long flags;
        int read_total = 0;
        int written_total = 0;

        spin_lock_irqsave(&hp->lock, flags);

        /* Push pending writes */
        if (hp->n_outbuf > 0)
                written_total = hvc_push(hp);

        /* Reschedule us if still some write pending */
        if (hp->n_outbuf > 0) {
                poll_mask |= HVC_POLL_WRITE;
                /* If hvc_push() was not able to write, sleep a few msecs */
                timeout = (written_total) ? 0 : MIN_TIMEOUT;
        }

        /* No tty attached, just skip */
        tty = tty_port_tty_get(&hp->port);
        if (tty == NULL)
                goto bail;

        /* Now check if we can get data (are we throttled ?) */
        if (tty_throttled(tty))
                goto throttled;

        /* If we aren't notifier driven and aren't throttled, we always
         * request a reschedule
         */
        if (!hp->irq_requested)
                poll_mask |= HVC_POLL_READ;

        /* Read data if any */
        for (;;) {
                int count = tty_buffer_request_room(&hp->port, N_INBUF);

                /* If flip is full, just reschedule a later read */
                if (count == 0) {
                        poll_mask |= HVC_POLL_READ;
                        break;
                }

                n = hp->ops->get_chars(hp->vtermno, buf, count);
                if (n <= 0) {
                        /* Hangup the tty when disconnected from host */
                        if (n == -EPIPE) {
                                spin_unlock_irqrestore(&hp->lock, flags);
                                tty_hangup(tty);
                                spin_lock_irqsave(&hp->lock, flags);
                        } else if ( n == -EAGAIN ) {
                                /*
                                 * Some back-ends can only ensure a certain min
                                 * num of bytes read, which may be > 'count'.
                                 * Let the tty clear the flip buff to make room.
                                 */
                                poll_mask |= HVC_POLL_READ;
                        }
                        break;
                }
                for (i = 0; i < n; ++i) {
#ifdef CONFIG_MAGIC_SYSRQ
                        if (hp->index == hvc_console.index) {
                                /* Handle the SysRq Hack */
                                /* XXX should support a sequence */
                                if (buf[i] == '\x0f') { /* ^O */
                                        /* if ^O is pressed again, reset
                                         * sysrq_pressed and flip ^O char */
                                        sysrq_pressed = !sysrq_pressed;
                                        if (sysrq_pressed)
                                                continue;
                                } else if (sysrq_pressed) {
                                        handle_sysrq(buf[i]);
                                        sysrq_pressed = 0;
                                        continue;
                                }
                        }
#endif /* CONFIG_MAGIC_SYSRQ */
                        tty_insert_flip_char(&hp->port, buf[i], 0);
                }

                read_total += n;
        }
 throttled:
        /* Wakeup write queue if necessary */
        if (hp->do_wakeup) {
                hp->do_wakeup = 0;
                tty_wakeup(tty);
        }
 bail:
        spin_unlock_irqrestore(&hp->lock, flags);

        if (read_total) {
                /* Activity is occurring, so reset the polling backoff value to
                   a minimum for performance. */
                timeout = MIN_TIMEOUT;

                tty_flip_buffer_push(&hp->port);
        }
        tty_kref_put(tty);

        return poll_mask;
}
EXPORT_SYMBOL_GPL(hvc_poll);

/**
 * __hvc_resize() - Update terminal window size information.
 * @hp:         HVC console pointer
 * @ws:         Terminal window size structure
 *
 * Stores the specified window size information in the hvc structure of @hp.
 * The function schedule the tty resize update.
 *
 * Locking:     Locking free; the function MUST be called holding hp->lock
 */
void __hvc_resize(struct hvc_struct *hp, struct winsize ws)
{
        hp->ws = ws;
        schedule_work(&hp->tty_resize);
}
EXPORT_SYMBOL_GPL(__hvc_resize);

/*
 * This kthread is either polling or interrupt driven.  This is determined by
 * calling hvc_poll() who determines whether a console adapter support
 * interrupts.
 */
static int khvcd(void *unused)
{
        int poll_mask;
        struct hvc_struct *hp;

        set_freezable();
        do {
                poll_mask = 0;
                hvc_kicked = 0;
                try_to_freeze();
                wmb();
                if (!cpus_are_in_xmon()) {
                        spin_lock(&hvc_structs_lock);
                        list_for_each_entry(hp, &hvc_structs, next) {
                                poll_mask |= hvc_poll(hp);
                        }
                        spin_unlock(&hvc_structs_lock);
                } else
                        poll_mask |= HVC_POLL_READ;
                if (hvc_kicked)
                        continue;
                set_current_state(TASK_INTERRUPTIBLE);
                if (!hvc_kicked) {
                        if (poll_mask == 0)
                                schedule();
                        else {
                                unsigned long j_timeout;

                                if (timeout < MAX_TIMEOUT)
                                        timeout += (timeout >> 6) + 1;

                                /*
                                 * We don't use msleep_interruptible otherwise
                                 * "kick" will fail to wake us up
                                 */
                                j_timeout = msecs_to_jiffies(timeout) + 1;
                                schedule_timeout_interruptible(j_timeout);
                        }
                }
                __set_current_state(TASK_RUNNING);
        } while (!kthread_should_stop());

        return 0;
}

static int hvc_tiocmget(struct tty_struct *tty)
{
        struct hvc_struct *hp = tty->driver_data;

        if (!hp || !hp->ops->tiocmget)
                return -EINVAL;
        return hp->ops->tiocmget(hp);
}

static int hvc_tiocmset(struct tty_struct *tty,
                        unsigned int set, unsigned int clear)
{
        struct hvc_struct *hp = tty->driver_data;

        if (!hp || !hp->ops->tiocmset)
                return -EINVAL;
        return hp->ops->tiocmset(hp, set, clear);
}

#ifdef CONFIG_CONSOLE_POLL
static int hvc_poll_init(struct tty_driver *driver, int line, char *options)
{
        return 0;
}

static int hvc_poll_get_char(struct tty_driver *driver, int line)
{
        struct tty_struct *tty = driver->ttys[0];
        struct hvc_struct *hp = tty->driver_data;
        int n;
        char ch;

        n = hp->ops->get_chars(hp->vtermno, &ch, 1);

        if (n <= 0)
                return NO_POLL_CHAR;

        return ch;
}

static void hvc_poll_put_char(struct tty_driver *driver, int line, char ch)
{
        struct tty_struct *tty = driver->ttys[0];
        struct hvc_struct *hp = tty->driver_data;
        int n;

        do {
                n = hp->ops->put_chars(hp->vtermno, &ch, 1);
        } while (n <= 0);
}
#endif

static const struct tty_operations hvc_ops = {
        .install = hvc_install,
        .open = hvc_open,
        .close = hvc_close,
        .cleanup = hvc_cleanup,
        .write = hvc_write,
        .hangup = hvc_hangup,
        .unthrottle = hvc_unthrottle,
        .write_room = hvc_write_room,
        .chars_in_buffer = hvc_chars_in_buffer,
        .tiocmget = hvc_tiocmget,
        .tiocmset = hvc_tiocmset,
#ifdef CONFIG_CONSOLE_POLL
        .poll_init = hvc_poll_init,
        .poll_get_char = hvc_poll_get_char,
        .poll_put_char = hvc_poll_put_char,
#endif
};

static const struct tty_port_operations hvc_port_ops = {
        .destruct = hvc_port_destruct,
};

struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
                             const struct hv_ops *ops,
                             int outbuf_size)
{
        struct hvc_struct *hp;
        int i;

        /* We wait until a driver actually comes along */
        if (atomic_inc_not_zero(&hvc_needs_init)) {
                int err = hvc_init();
                if (err)
                        return ERR_PTR(err);
        }

        hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
                        GFP_KERNEL);
        if (!hp)
                return ERR_PTR(-ENOMEM);

        hp->vtermno = vtermno;
        hp->data = data;
        hp->ops = ops;
        hp->outbuf_size = outbuf_size;
        hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))];

        tty_port_init(&hp->port);
        hp->port.ops = &hvc_port_ops;

        INIT_WORK(&hp->tty_resize, hvc_set_winsz);
        spin_lock_init(&hp->lock);
        spin_lock(&hvc_structs_lock);

        /*
         * find index to use:
         * see if this vterm id matches one registered for console.
         */
        for (i=0; i < MAX_NR_HVC_CONSOLES; i++)
                if (vtermnos[i] == hp->vtermno &&
                    cons_ops[i] == hp->ops)
                        break;

        /* no matching slot, just use a counter */
        if (i >= MAX_NR_HVC_CONSOLES)
                i = ++last_hvc;

        hp->index = i;
        cons_ops[i] = ops;
        vtermnos[i] = vtermno;

        list_add_tail(&(hp->next), &hvc_structs);
        spin_unlock(&hvc_structs_lock);

        /* check if we need to re-register the kernel console */
        hvc_check_console(i);

        return hp;
}
EXPORT_SYMBOL_GPL(hvc_alloc);

int hvc_remove(struct hvc_struct *hp)
{
        unsigned long flags;
        struct tty_struct *tty;

        tty = tty_port_tty_get(&hp->port);

        console_lock();
        spin_lock_irqsave(&hp->lock, flags);
        if (hp->index < MAX_NR_HVC_CONSOLES) {
                vtermnos[hp->index] = -1;
                cons_ops[hp->index] = NULL;
        }

        /* Don't whack hp->irq because tty_hangup() will need to free the irq. */

        spin_unlock_irqrestore(&hp->lock, flags);
        console_unlock();

        /*
         * We 'put' the instance that was grabbed when the kref instance
         * was initialized using kref_init().  Let the last holder of this
         * kref cause it to be removed, which will probably be the tty_vhangup
         * below.
         */
        tty_port_put(&hp->port);

        /*
         * This function call will auto chain call hvc_hangup.
         */
        if (tty) {
                tty_vhangup(tty);
                tty_kref_put(tty);
        }
        return 0;
}
EXPORT_SYMBOL_GPL(hvc_remove);

/* Driver initialization: called as soon as someone uses hvc_alloc(). */
static int hvc_init(void)
{
        struct tty_driver *drv;
        int err;

        /* We need more than hvc_count adapters due to hotplug additions. */
        drv = alloc_tty_driver(HVC_ALLOC_TTY_ADAPTERS);
        if (!drv) {
                err = -ENOMEM;
                goto out;
        }

        drv->driver_name = "hvc";
        drv->name = "hvc";
        drv->major = HVC_MAJOR;
        drv->minor_start = HVC_MINOR;
        drv->type = TTY_DRIVER_TYPE_SYSTEM;
        drv->init_termios = tty_std_termios;
        drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS;
        tty_set_operations(drv, &hvc_ops);

        /* Always start the kthread because there can be hotplug vty adapters
         * added later. */
        hvc_task = kthread_run(khvcd, NULL, "khvcd");
        if (IS_ERR(hvc_task)) {
                printk(KERN_ERR "Couldn't create kthread for console.\n");
                err = PTR_ERR(hvc_task);
                goto put_tty;
        }

        err = tty_register_driver(drv);
        if (err) {
                printk(KERN_ERR "Couldn't register hvc console driver\n");
                goto stop_thread;
        }

        /*
         * Make sure tty is fully registered before allowing it to be
         * found by hvc_console_device.
         */
        smp_mb();
        hvc_driver = drv;
        return 0;

stop_thread:
        kthread_stop(hvc_task);
        hvc_task = NULL;
put_tty:
        put_tty_driver(drv);
out:
        return err;
}