?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.16.11
[linux/fpc-iii.git] / drivers / tty / serial / rp2.c
blob520b43b235430af110086e673aa304419a810551
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Driver for Comtrol RocketPort EXPRESS/INFINITY cards
4 *
5 * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
6 *
7 * Inspired by, and loosely based on:
8 *
9 * ar933x_uart.c
10 * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
11 *
12 * rocketport_infinity_express-linux-1.20.tar.gz
13 * Copyright (C) 2004-2011 Comtrol, Inc.
14 */
15
16 #include <linux/bitops.h>
17 #include <linux/compiler.h>
18 #include <linux/completion.h>
19 #include <linux/console.h>
20 #include <linux/delay.h>
21 #include <linux/firmware.h>
22 #include <linux/init.h>
23 #include <linux/io.h>
24 #include <linux/ioport.h>
25 #include <linux/irq.h>
26 #include <linux/kernel.h>
27 #include <linux/log2.h>
28 #include <linux/module.h>
29 #include <linux/pci.h>
30 #include <linux/serial.h>
31 #include <linux/serial_core.h>
32 #include <linux/slab.h>
33 #include <linux/sysrq.h>
34 #include <linux/tty.h>
35 #include <linux/tty_flip.h>
36 #include <linux/types.h>
37
38 #define DRV_NAME "rp2"
39
40 #define RP2_FW_NAME "rp2.fw"
41 #define RP2_UCODE_BYTES 0x3f
42
43 #define PORTS_PER_ASIC 16
44 #define ALL_PORTS_MASK (BIT(PORTS_PER_ASIC) - 1)
45
46 #define UART_CLOCK 44236800
47 #define DEFAULT_BAUD_DIV (UART_CLOCK / (9600 * 16))
48 #define FIFO_SIZE 512
49
50 /* BAR0 registers */
51 #define RP2_FPGA_CTL0 0x110
52 #define RP2_FPGA_CTL1 0x11c
53 #define RP2_IRQ_MASK 0x1ec
54 #define RP2_IRQ_MASK_EN_m BIT(0)
55 #define RP2_IRQ_STATUS 0x1f0
56
57 /* BAR1 registers */
58 #define RP2_ASIC_SPACING 0x1000
59 #define RP2_ASIC_OFFSET(i) ((i) << ilog2(RP2_ASIC_SPACING))
60
61 #define RP2_PORT_BASE 0x000
62 #define RP2_PORT_SPACING 0x040
63
64 #define RP2_UCODE_BASE 0x400
65 #define RP2_UCODE_SPACING 0x80
66
67 #define RP2_CLK_PRESCALER 0xc00
68 #define RP2_CH_IRQ_STAT 0xc04
69 #define RP2_CH_IRQ_MASK 0xc08
70 #define RP2_ASIC_IRQ 0xd00
71 #define RP2_ASIC_IRQ_EN_m BIT(20)
72 #define RP2_GLOBAL_CMD 0xd0c
73 #define RP2_ASIC_CFG 0xd04
74
75 /* port registers */
76 #define RP2_DATA_DWORD 0x000
77
78 #define RP2_DATA_BYTE 0x008
79 #define RP2_DATA_BYTE_ERR_PARITY_m BIT(8)
80 #define RP2_DATA_BYTE_ERR_OVERRUN_m BIT(9)
81 #define RP2_DATA_BYTE_ERR_FRAMING_m BIT(10)
82 #define RP2_DATA_BYTE_BREAK_m BIT(11)
83
84 /* This lets uart_insert_char() drop bytes received on a !CREAD port */
85 #define RP2_DUMMY_READ BIT(16)
86
87 #define RP2_DATA_BYTE_EXCEPTION_MASK (RP2_DATA_BYTE_ERR_PARITY_m | \
88 RP2_DATA_BYTE_ERR_OVERRUN_m | \
89 RP2_DATA_BYTE_ERR_FRAMING_m | \
90 RP2_DATA_BYTE_BREAK_m)
91
92 #define RP2_RX_FIFO_COUNT 0x00c
93 #define RP2_TX_FIFO_COUNT 0x00e
94
95 #define RP2_CHAN_STAT 0x010
96 #define RP2_CHAN_STAT_RXDATA_m BIT(0)
97 #define RP2_CHAN_STAT_DCD_m BIT(3)
98 #define RP2_CHAN_STAT_DSR_m BIT(4)
99 #define RP2_CHAN_STAT_CTS_m BIT(5)
100 #define RP2_CHAN_STAT_RI_m BIT(6)
101 #define RP2_CHAN_STAT_OVERRUN_m BIT(13)
102 #define RP2_CHAN_STAT_DSR_CHANGED_m BIT(16)
103 #define RP2_CHAN_STAT_CTS_CHANGED_m BIT(17)
104 #define RP2_CHAN_STAT_CD_CHANGED_m BIT(18)
105 #define RP2_CHAN_STAT_RI_CHANGED_m BIT(22)
106 #define RP2_CHAN_STAT_TXEMPTY_m BIT(25)
107
108 #define RP2_CHAN_STAT_MS_CHANGED_MASK (RP2_CHAN_STAT_DSR_CHANGED_m | \
109 RP2_CHAN_STAT_CTS_CHANGED_m | \
110 RP2_CHAN_STAT_CD_CHANGED_m | \
111 RP2_CHAN_STAT_RI_CHANGED_m)
112
113 #define RP2_TXRX_CTL 0x014
114 #define RP2_TXRX_CTL_MSRIRQ_m BIT(0)
115 #define RP2_TXRX_CTL_RXIRQ_m BIT(2)
116 #define RP2_TXRX_CTL_RX_TRIG_s 3
117 #define RP2_TXRX_CTL_RX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
118 #define RP2_TXRX_CTL_RX_TRIG_1 (0x1 << RP2_TXRX_CTL_RX_TRIG_s)
119 #define RP2_TXRX_CTL_RX_TRIG_256 (0x2 << RP2_TXRX_CTL_RX_TRIG_s)
120 #define RP2_TXRX_CTL_RX_TRIG_448 (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
121 #define RP2_TXRX_CTL_RX_EN_m BIT(5)
122 #define RP2_TXRX_CTL_RTSFLOW_m BIT(6)
123 #define RP2_TXRX_CTL_DTRFLOW_m BIT(7)
124 #define RP2_TXRX_CTL_TX_TRIG_s 16
125 #define RP2_TXRX_CTL_TX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
126 #define RP2_TXRX_CTL_DSRFLOW_m BIT(18)
127 #define RP2_TXRX_CTL_TXIRQ_m BIT(19)
128 #define RP2_TXRX_CTL_CTSFLOW_m BIT(23)
129 #define RP2_TXRX_CTL_TX_EN_m BIT(24)
130 #define RP2_TXRX_CTL_RTS_m BIT(25)
131 #define RP2_TXRX_CTL_DTR_m BIT(26)
132 #define RP2_TXRX_CTL_LOOP_m BIT(27)
133 #define RP2_TXRX_CTL_BREAK_m BIT(28)
134 #define RP2_TXRX_CTL_CMSPAR_m BIT(29)
135 #define RP2_TXRX_CTL_nPARODD_m BIT(30)
136 #define RP2_TXRX_CTL_PARENB_m BIT(31)
137
138 #define RP2_UART_CTL 0x018
139 #define RP2_UART_CTL_MODE_s 0
140 #define RP2_UART_CTL_MODE_m (0x7 << RP2_UART_CTL_MODE_s)
141 #define RP2_UART_CTL_MODE_rs232 (0x1 << RP2_UART_CTL_MODE_s)
142 #define RP2_UART_CTL_FLUSH_RX_m BIT(3)
143 #define RP2_UART_CTL_FLUSH_TX_m BIT(4)
144 #define RP2_UART_CTL_RESET_CH_m BIT(5)
145 #define RP2_UART_CTL_XMIT_EN_m BIT(6)
146 #define RP2_UART_CTL_DATABITS_s 8
147 #define RP2_UART_CTL_DATABITS_m (0x3 << RP2_UART_CTL_DATABITS_s)
148 #define RP2_UART_CTL_DATABITS_8 (0x3 << RP2_UART_CTL_DATABITS_s)
149 #define RP2_UART_CTL_DATABITS_7 (0x2 << RP2_UART_CTL_DATABITS_s)
150 #define RP2_UART_CTL_DATABITS_6 (0x1 << RP2_UART_CTL_DATABITS_s)
151 #define RP2_UART_CTL_DATABITS_5 (0x0 << RP2_UART_CTL_DATABITS_s)
152 #define RP2_UART_CTL_STOPBITS_m BIT(10)
153
154 #define RP2_BAUD 0x01c
155
156 /* ucode registers */
157 #define RP2_TX_SWFLOW 0x02
158 #define RP2_TX_SWFLOW_ena 0x81
159 #define RP2_TX_SWFLOW_dis 0x9d
160
161 #define RP2_RX_SWFLOW 0x0c
162 #define RP2_RX_SWFLOW_ena 0x81
163 #define RP2_RX_SWFLOW_dis 0x8d
164
165 #define RP2_RX_FIFO 0x37
166 #define RP2_RX_FIFO_ena 0x08
167 #define RP2_RX_FIFO_dis 0x81
168
169 static struct uart_driver rp2_uart_driver = {
170 .owner = THIS_MODULE,
171 .driver_name = DRV_NAME,
172 .dev_name = "ttyRP",
173 .nr = CONFIG_SERIAL_RP2_NR_UARTS,
174 };
175
176 struct rp2_card;
177
178 struct rp2_uart_port {
179 struct uart_port port;
180 int idx;
181 int ignore_rx;
182 struct rp2_card *card;
183 void __iomem *asic_base;
184 void __iomem *base;
185 void __iomem *ucode;
186 };
187
188 struct rp2_card {
189 struct pci_dev *pdev;
190 struct rp2_uart_port *ports;
191 int n_ports;
192 int initialized_ports;
193 int minor_start;
194 int smpte;
195 void __iomem *bar0;
196 void __iomem *bar1;
197 spinlock_t card_lock;
198 struct completion fw_loaded;
199 };
200
201 #define RP_ID(prod) PCI_VDEVICE(RP, (prod))
202 #define RP_CAP(ports, smpte) (((ports) << 8) | ((smpte) << 0))
203
204 static inline void rp2_decode_cap(const struct pci_device_id *id,
205 int *ports, int *smpte)
206 {
207 *ports = id->driver_data >> 8;
208 *smpte = id->driver_data & 0xff;
209 }
210
211 static DEFINE_SPINLOCK(rp2_minor_lock);
212 static int rp2_minor_next;
213
214 static int rp2_alloc_ports(int n_ports)
215 {
216 int ret = -ENOSPC;
217
218 spin_lock(&rp2_minor_lock);
219 if (rp2_minor_next + n_ports <= CONFIG_SERIAL_RP2_NR_UARTS) {
220 /* sorry, no support for hot unplugging individual cards */
221 ret = rp2_minor_next;
222 rp2_minor_next += n_ports;
223 }
224 spin_unlock(&rp2_minor_lock);
225
226 return ret;
227 }
228
229 static inline struct rp2_uart_port *port_to_up(struct uart_port *port)
230 {
231 return container_of(port, struct rp2_uart_port, port);
232 }
233
234 static void rp2_rmw(struct rp2_uart_port *up, int reg,
235 u32 clr_bits, u32 set_bits)
236 {
237 u32 tmp = readl(up->base + reg);
238 tmp &= ~clr_bits;
239 tmp |= set_bits;
240 writel(tmp, up->base + reg);
241 }
242
243 static void rp2_rmw_clr(struct rp2_uart_port *up, int reg, u32 val)
244 {
245 rp2_rmw(up, reg, val, 0);
246 }
247
248 static void rp2_rmw_set(struct rp2_uart_port *up, int reg, u32 val)
249 {
250 rp2_rmw(up, reg, 0, val);
251 }
252
253 static void rp2_mask_ch_irq(struct rp2_uart_port *up, int ch_num,
254 int is_enabled)
255 {
256 unsigned long flags, irq_mask;
257
258 spin_lock_irqsave(&up->card->card_lock, flags);
259
260 irq_mask = readl(up->asic_base + RP2_CH_IRQ_MASK);
261 if (is_enabled)
262 irq_mask &= ~BIT(ch_num);
263 else
264 irq_mask |= BIT(ch_num);
265 writel(irq_mask, up->asic_base + RP2_CH_IRQ_MASK);
266
267 spin_unlock_irqrestore(&up->card->card_lock, flags);
268 }
269
270 static unsigned int rp2_uart_tx_empty(struct uart_port *port)
271 {
272 struct rp2_uart_port *up = port_to_up(port);
273 unsigned long tx_fifo_bytes, flags;
274
275 /*
276 * This should probably check the transmitter, not the FIFO.
277 * But the TXEMPTY bit doesn't seem to work unless the TX IRQ is
278 * enabled.
279 */
280 spin_lock_irqsave(&up->port.lock, flags);
281 tx_fifo_bytes = readw(up->base + RP2_TX_FIFO_COUNT);
282 spin_unlock_irqrestore(&up->port.lock, flags);
283
284 return tx_fifo_bytes ? 0 : TIOCSER_TEMT;
285 }
286
287 static unsigned int rp2_uart_get_mctrl(struct uart_port *port)
288 {
289 struct rp2_uart_port *up = port_to_up(port);
290 u32 status;
291
292 status = readl(up->base + RP2_CHAN_STAT);
293 return ((status & RP2_CHAN_STAT_DCD_m) ? TIOCM_CAR : 0) |
294 ((status & RP2_CHAN_STAT_DSR_m) ? TIOCM_DSR : 0) |
295 ((status & RP2_CHAN_STAT_CTS_m) ? TIOCM_CTS : 0) |
296 ((status & RP2_CHAN_STAT_RI_m) ? TIOCM_RI : 0);
297 }
298
299 static void rp2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
300 {
301 rp2_rmw(port_to_up(port), RP2_TXRX_CTL,
302 RP2_TXRX_CTL_DTR_m | RP2_TXRX_CTL_RTS_m | RP2_TXRX_CTL_LOOP_m,
303 ((mctrl & TIOCM_DTR) ? RP2_TXRX_CTL_DTR_m : 0) |
304 ((mctrl & TIOCM_RTS) ? RP2_TXRX_CTL_RTS_m : 0) |
305 ((mctrl & TIOCM_LOOP) ? RP2_TXRX_CTL_LOOP_m : 0));
306 }
307
308 static void rp2_uart_start_tx(struct uart_port *port)
309 {
310 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
311 }
312
313 static void rp2_uart_stop_tx(struct uart_port *port)
314 {
315 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
316 }
317
318 static void rp2_uart_stop_rx(struct uart_port *port)
319 {
320 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_RXIRQ_m);
321 }
322
323 static void rp2_uart_break_ctl(struct uart_port *port, int break_state)
324 {
325 unsigned long flags;
326
327 spin_lock_irqsave(&port->lock, flags);
328 rp2_rmw(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_BREAK_m,
329 break_state ? RP2_TXRX_CTL_BREAK_m : 0);
330 spin_unlock_irqrestore(&port->lock, flags);
331 }
332
333 static void rp2_uart_enable_ms(struct uart_port *port)
334 {
335 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m);
336 }
337
338 static void __rp2_uart_set_termios(struct rp2_uart_port *up,
339 unsigned long cfl,
340 unsigned long ifl,
341 unsigned int baud_div)
342 {
343 /* baud rate divisor (calculated elsewhere). 0 = divide-by-1 */
344 writew(baud_div - 1, up->base + RP2_BAUD);
345
346 /* data bits and stop bits */
347 rp2_rmw(up, RP2_UART_CTL,
348 RP2_UART_CTL_STOPBITS_m | RP2_UART_CTL_DATABITS_m,
349 ((cfl & CSTOPB) ? RP2_UART_CTL_STOPBITS_m : 0) |
350 (((cfl & CSIZE) == CS8) ? RP2_UART_CTL_DATABITS_8 : 0) |
351 (((cfl & CSIZE) == CS7) ? RP2_UART_CTL_DATABITS_7 : 0) |
352 (((cfl & CSIZE) == CS6) ? RP2_UART_CTL_DATABITS_6 : 0) |
353 (((cfl & CSIZE) == CS5) ? RP2_UART_CTL_DATABITS_5 : 0));
354
355 /* parity and hardware flow control */
356 rp2_rmw(up, RP2_TXRX_CTL,
357 RP2_TXRX_CTL_PARENB_m | RP2_TXRX_CTL_nPARODD_m |
358 RP2_TXRX_CTL_CMSPAR_m | RP2_TXRX_CTL_DTRFLOW_m |
359 RP2_TXRX_CTL_DSRFLOW_m | RP2_TXRX_CTL_RTSFLOW_m |
360 RP2_TXRX_CTL_CTSFLOW_m,
361 ((cfl & PARENB) ? RP2_TXRX_CTL_PARENB_m : 0) |
362 ((cfl & PARODD) ? 0 : RP2_TXRX_CTL_nPARODD_m) |
363 ((cfl & CMSPAR) ? RP2_TXRX_CTL_CMSPAR_m : 0) |
364 ((cfl & CRTSCTS) ? (RP2_TXRX_CTL_RTSFLOW_m |
365 RP2_TXRX_CTL_CTSFLOW_m) : 0));
366
367 /* XON/XOFF software flow control */
368 writeb((ifl & IXON) ? RP2_TX_SWFLOW_ena : RP2_TX_SWFLOW_dis,
369 up->ucode + RP2_TX_SWFLOW);
370 writeb((ifl & IXOFF) ? RP2_RX_SWFLOW_ena : RP2_RX_SWFLOW_dis,
371 up->ucode + RP2_RX_SWFLOW);
372 }
373
374 static void rp2_uart_set_termios(struct uart_port *port,
375 struct ktermios *new,
376 struct ktermios *old)
377 {
378 struct rp2_uart_port *up = port_to_up(port);
379 unsigned long flags;
380 unsigned int baud, baud_div;
381
382 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
383 baud_div = uart_get_divisor(port, baud);
384
385 if (tty_termios_baud_rate(new))
386 tty_termios_encode_baud_rate(new, baud, baud);
387
388 spin_lock_irqsave(&port->lock, flags);
389
390 /* ignore all characters if CREAD is not set */
391 port->ignore_status_mask = (new->c_cflag & CREAD) ? 0 : RP2_DUMMY_READ;
392
393 __rp2_uart_set_termios(up, new->c_cflag, new->c_iflag, baud_div);
394 uart_update_timeout(port, new->c_cflag, baud);
395
396 spin_unlock_irqrestore(&port->lock, flags);
397 }
398
399 static void rp2_rx_chars(struct rp2_uart_port *up)
400 {
401 u16 bytes = readw(up->base + RP2_RX_FIFO_COUNT);
402 struct tty_port *port = &up->port.state->port;
403
404 for (; bytes != 0; bytes--) {
405 u32 byte = readw(up->base + RP2_DATA_BYTE) | RP2_DUMMY_READ;
406 char ch = byte & 0xff;
407
408 if (likely(!(byte & RP2_DATA_BYTE_EXCEPTION_MASK))) {
409 if (!uart_handle_sysrq_char(&up->port, ch))
410 uart_insert_char(&up->port, byte, 0, ch,
411 TTY_NORMAL);
412 } else {
413 char flag = TTY_NORMAL;
414
415 if (byte & RP2_DATA_BYTE_BREAK_m)
416 flag = TTY_BREAK;
417 else if (byte & RP2_DATA_BYTE_ERR_FRAMING_m)
418 flag = TTY_FRAME;
419 else if (byte & RP2_DATA_BYTE_ERR_PARITY_m)
420 flag = TTY_PARITY;
421 uart_insert_char(&up->port, byte,
422 RP2_DATA_BYTE_ERR_OVERRUN_m, ch, flag);
423 }
424 up->port.icount.rx++;
425 }
426
427 spin_unlock(&up->port.lock);
428 tty_flip_buffer_push(port);
429 spin_lock(&up->port.lock);
430 }
431
432 static void rp2_tx_chars(struct rp2_uart_port *up)
433 {
434 u16 max_tx = FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT);
435 struct circ_buf *xmit = &up->port.state->xmit;
436
437 if (uart_tx_stopped(&up->port)) {
438 rp2_uart_stop_tx(&up->port);
439 return;
440 }
441
442 for (; max_tx != 0; max_tx--) {
443 if (up->port.x_char) {
444 writeb(up->port.x_char, up->base + RP2_DATA_BYTE);
445 up->port.x_char = 0;
446 up->port.icount.tx++;
447 continue;
448 }
449 if (uart_circ_empty(xmit)) {
450 rp2_uart_stop_tx(&up->port);
451 break;
452 }
453 writeb(xmit->buf[xmit->tail], up->base + RP2_DATA_BYTE);
454 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
455 up->port.icount.tx++;
456 }
457
458 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
459 uart_write_wakeup(&up->port);
460 }
461
462 static void rp2_ch_interrupt(struct rp2_uart_port *up)
463 {
464 u32 status;
465
466 spin_lock(&up->port.lock);
467
468 /*
469 * The IRQ status bits are clear-on-write. Other status bits in
470 * this register aren't, so it's harmless to write to them.
471 */
472 status = readl(up->base + RP2_CHAN_STAT);
473 writel(status, up->base + RP2_CHAN_STAT);
474
475 if (status & RP2_CHAN_STAT_RXDATA_m)
476 rp2_rx_chars(up);
477 if (status & RP2_CHAN_STAT_TXEMPTY_m)
478 rp2_tx_chars(up);
479 if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
480 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
481
482 spin_unlock(&up->port.lock);
483 }
484
485 static int rp2_asic_interrupt(struct rp2_card *card, unsigned int asic_id)
486 {
487 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
488 int ch, handled = 0;
489 unsigned long status = readl(base + RP2_CH_IRQ_STAT) &
490 ~readl(base + RP2_CH_IRQ_MASK);
491
492 for_each_set_bit(ch, &status, PORTS_PER_ASIC) {
493 rp2_ch_interrupt(&card->ports[ch]);
494 handled++;
495 }
496 return handled;
497 }
498
499 static irqreturn_t rp2_uart_interrupt(int irq, void *dev_id)
500 {
501 struct rp2_card *card = dev_id;
502 int handled;
503
504 handled = rp2_asic_interrupt(card, 0);
505 if (card->n_ports >= PORTS_PER_ASIC)
506 handled += rp2_asic_interrupt(card, 1);
507
508 return handled ? IRQ_HANDLED : IRQ_NONE;
509 }
510
511 static inline void rp2_flush_fifos(struct rp2_uart_port *up)
512 {
513 rp2_rmw_set(up, RP2_UART_CTL,
514 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
515 readl(up->base + RP2_UART_CTL);
516 udelay(10);
517 rp2_rmw_clr(up, RP2_UART_CTL,
518 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
519 }
520
521 static int rp2_uart_startup(struct uart_port *port)
522 {
523 struct rp2_uart_port *up = port_to_up(port);
524
525 rp2_flush_fifos(up);
526 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m, RP2_TXRX_CTL_RXIRQ_m);
527 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_RX_TRIG_m,
528 RP2_TXRX_CTL_RX_TRIG_1);
529 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
530 rp2_mask_ch_irq(up, up->idx, 1);
531
532 return 0;
533 }
534
535 static void rp2_uart_shutdown(struct uart_port *port)
536 {
537 struct rp2_uart_port *up = port_to_up(port);
538 unsigned long flags;
539
540 rp2_uart_break_ctl(port, 0);
541
542 spin_lock_irqsave(&port->lock, flags);
543 rp2_mask_ch_irq(up, up->idx, 0);
544 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
545 spin_unlock_irqrestore(&port->lock, flags);
546 }
547
548 static const char *rp2_uart_type(struct uart_port *port)
549 {
550 return (port->type == PORT_RP2) ? "RocketPort 2 UART" : NULL;
551 }
552
553 static void rp2_uart_release_port(struct uart_port *port)
554 {
555 /* Nothing to release ... */
556 }
557
558 static int rp2_uart_request_port(struct uart_port *port)
559 {
560 /* UARTs always present */
561 return 0;
562 }
563
564 static void rp2_uart_config_port(struct uart_port *port, int flags)
565 {
566 if (flags & UART_CONFIG_TYPE)
567 port->type = PORT_RP2;
568 }
569
570 static int rp2_uart_verify_port(struct uart_port *port,
571 struct serial_struct *ser)
572 {
573 if (ser->type != PORT_UNKNOWN && ser->type != PORT_RP2)
574 return -EINVAL;
575
576 return 0;
577 }
578
579 static const struct uart_ops rp2_uart_ops = {
580 .tx_empty = rp2_uart_tx_empty,
581 .set_mctrl = rp2_uart_set_mctrl,
582 .get_mctrl = rp2_uart_get_mctrl,
583 .stop_tx = rp2_uart_stop_tx,
584 .start_tx = rp2_uart_start_tx,
585 .stop_rx = rp2_uart_stop_rx,
586 .enable_ms = rp2_uart_enable_ms,
587 .break_ctl = rp2_uart_break_ctl,
588 .startup = rp2_uart_startup,
589 .shutdown = rp2_uart_shutdown,
590 .set_termios = rp2_uart_set_termios,
591 .type = rp2_uart_type,
592 .release_port = rp2_uart_release_port,
593 .request_port = rp2_uart_request_port,
594 .config_port = rp2_uart_config_port,
595 .verify_port = rp2_uart_verify_port,
596 };
597
598 static void rp2_reset_asic(struct rp2_card *card, unsigned int asic_id)
599 {
600 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
601 u32 clk_cfg;
602
603 writew(1, base + RP2_GLOBAL_CMD);
604 readw(base + RP2_GLOBAL_CMD);
605 msleep(100);
606 writel(0, base + RP2_CLK_PRESCALER);
607
608 /* TDM clock configuration */
609 clk_cfg = readw(base + RP2_ASIC_CFG);
610 clk_cfg = (clk_cfg & ~BIT(8)) | BIT(9);
611 writew(clk_cfg, base + RP2_ASIC_CFG);
612
613 /* IRQ routing */
614 writel(ALL_PORTS_MASK, base + RP2_CH_IRQ_MASK);
615 writel(RP2_ASIC_IRQ_EN_m, base + RP2_ASIC_IRQ);
616 }
617
618 static void rp2_init_card(struct rp2_card *card)
619 {
620 writel(4, card->bar0 + RP2_FPGA_CTL0);
621 writel(0, card->bar0 + RP2_FPGA_CTL1);
622
623 rp2_reset_asic(card, 0);
624 if (card->n_ports >= PORTS_PER_ASIC)
625 rp2_reset_asic(card, 1);
626
627 writel(RP2_IRQ_MASK_EN_m, card->bar0 + RP2_IRQ_MASK);
628 }
629
630 static void rp2_init_port(struct rp2_uart_port *up, const struct firmware *fw)
631 {
632 int i;
633
634 writel(RP2_UART_CTL_RESET_CH_m, up->base + RP2_UART_CTL);
635 readl(up->base + RP2_UART_CTL);
636 udelay(1);
637
638 writel(0, up->base + RP2_TXRX_CTL);
639 writel(0, up->base + RP2_UART_CTL);
640 readl(up->base + RP2_UART_CTL);
641 udelay(1);
642
643 rp2_flush_fifos(up);
644
645 for (i = 0; i < min_t(int, fw->size, RP2_UCODE_BYTES); i++)
646 writeb(fw->data[i], up->ucode + i);
647
648 __rp2_uart_set_termios(up, CS8 | CREAD | CLOCAL, 0, DEFAULT_BAUD_DIV);
649 rp2_uart_set_mctrl(&up->port, 0);
650
651 writeb(RP2_RX_FIFO_ena, up->ucode + RP2_RX_FIFO);
652 rp2_rmw(up, RP2_UART_CTL, RP2_UART_CTL_MODE_m,
653 RP2_UART_CTL_XMIT_EN_m | RP2_UART_CTL_MODE_rs232);
654 rp2_rmw_set(up, RP2_TXRX_CTL,
655 RP2_TXRX_CTL_TX_EN_m | RP2_TXRX_CTL_RX_EN_m);
656 }
657
658 static void rp2_remove_ports(struct rp2_card *card)
659 {
660 int i;
661
662 for (i = 0; i < card->initialized_ports; i++)
663 uart_remove_one_port(&rp2_uart_driver, &card->ports[i].port);
664 card->initialized_ports = 0;
665 }
666
667 static void rp2_fw_cb(const struct firmware *fw, void *context)
668 {
669 struct rp2_card *card = context;
670 resource_size_t phys_base;
671 int i, rc = -ENOENT;
672
673 if (!fw) {
674 dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
675 RP2_FW_NAME);
676 goto no_fw;
677 }
678
679 phys_base = pci_resource_start(card->pdev, 1);
680
681 for (i = 0; i < card->n_ports; i++) {
682 struct rp2_uart_port *rp = &card->ports[i];
683 struct uart_port *p;
684 int j = (unsigned)i % PORTS_PER_ASIC;
685
686 rp->asic_base = card->bar1;
687 rp->base = card->bar1 + RP2_PORT_BASE + j*RP2_PORT_SPACING;
688 rp->ucode = card->bar1 + RP2_UCODE_BASE + j*RP2_UCODE_SPACING;
689 rp->card = card;
690 rp->idx = j;
691
692 p = &rp->port;
693 p->line = card->minor_start + i;
694 p->dev = &card->pdev->dev;
695 p->type = PORT_RP2;
696 p->iotype = UPIO_MEM32;
697 p->uartclk = UART_CLOCK;
698 p->regshift = 2;
699 p->fifosize = FIFO_SIZE;
700 p->ops = &rp2_uart_ops;
701 p->irq = card->pdev->irq;
702 p->membase = rp->base;
703 p->mapbase = phys_base + RP2_PORT_BASE + j*RP2_PORT_SPACING;
704
705 if (i >= PORTS_PER_ASIC) {
706 rp->asic_base += RP2_ASIC_SPACING;
707 rp->base += RP2_ASIC_SPACING;
708 rp->ucode += RP2_ASIC_SPACING;
709 p->mapbase += RP2_ASIC_SPACING;
710 }
711
712 rp2_init_port(rp, fw);
713 rc = uart_add_one_port(&rp2_uart_driver, p);
714 if (rc) {
715 dev_err(&card->pdev->dev,
716 "error registering port %d: %d\n", i, rc);
717 rp2_remove_ports(card);
718 break;
719 }
720 card->initialized_ports++;
721 }
722
723 release_firmware(fw);
724 no_fw:
725 /*
726 * rp2_fw_cb() is called from a workqueue long after rp2_probe()
727 * has already returned success. So if something failed here,
728 * we'll just leave the now-dormant device in place until somebody
729 * unbinds it.
730 */
731 if (rc)
732 dev_warn(&card->pdev->dev, "driver initialization failed\n");
733
734 complete(&card->fw_loaded);
735 }
736
737 static int rp2_probe(struct pci_dev *pdev,
738 const struct pci_device_id *id)
739 {
740 struct rp2_card *card;
741 struct rp2_uart_port *ports;
742 void __iomem * const *bars;
743 int rc;
744
745 card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
746 if (!card)
747 return -ENOMEM;
748 pci_set_drvdata(pdev, card);
749 spin_lock_init(&card->card_lock);
750 init_completion(&card->fw_loaded);
751
752 rc = pcim_enable_device(pdev);
753 if (rc)
754 return rc;
755
756 rc = pcim_iomap_regions_request_all(pdev, 0x03, DRV_NAME);
757 if (rc)
758 return rc;
759
760 bars = pcim_iomap_table(pdev);
761 card->bar0 = bars[0];
762 card->bar1 = bars[1];
763 card->pdev = pdev;
764
765 rp2_decode_cap(id, &card->n_ports, &card->smpte);
766 dev_info(&pdev->dev, "found new card with %d ports\n", card->n_ports);
767
768 card->minor_start = rp2_alloc_ports(card->n_ports);
769 if (card->minor_start < 0) {
770 dev_err(&pdev->dev,
771 "too many ports (try increasing CONFIG_SERIAL_RP2_NR_UARTS)\n");
772 return -EINVAL;
773 }
774
775 rp2_init_card(card);
776
777 ports = devm_kzalloc(&pdev->dev, sizeof(*ports) * card->n_ports,
778 GFP_KERNEL);
779 if (!ports)
780 return -ENOMEM;
781 card->ports = ports;
782
783 rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
784 IRQF_SHARED, DRV_NAME, card);
785 if (rc)
786 return rc;
787
788 /*
789 * Only catastrophic errors (e.g. ENOMEM) are reported here.
790 * If the FW image is missing, we'll find out in rp2_fw_cb()
791 * and print an error message.
792 */
793 rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
794 GFP_KERNEL, card, rp2_fw_cb);
795 if (rc)
796 return rc;
797 dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
798
799 return 0;
800 }
801
802 static void rp2_remove(struct pci_dev *pdev)
803 {
804 struct rp2_card *card = pci_get_drvdata(pdev);
805
806 wait_for_completion(&card->fw_loaded);
807 rp2_remove_ports(card);
808 }
809
810 static const struct pci_device_id rp2_pci_tbl[] = {
811
812 /* RocketPort INFINITY cards */
813
814 { RP_ID(0x0040), RP_CAP(8, 0) }, /* INF Octa, RJ45, selectable */
815 { RP_ID(0x0041), RP_CAP(32, 0) }, /* INF 32, ext interface */
816 { RP_ID(0x0042), RP_CAP(8, 0) }, /* INF Octa, ext interface */
817 { RP_ID(0x0043), RP_CAP(16, 0) }, /* INF 16, ext interface */
818 { RP_ID(0x0044), RP_CAP(4, 0) }, /* INF Quad, DB, selectable */
819 { RP_ID(0x0045), RP_CAP(8, 0) }, /* INF Octa, DB, selectable */
820 { RP_ID(0x0046), RP_CAP(4, 0) }, /* INF Quad, ext interface */
821 { RP_ID(0x0047), RP_CAP(4, 0) }, /* INF Quad, RJ45 */
822 { RP_ID(0x004a), RP_CAP(4, 0) }, /* INF Plus, Quad */
823 { RP_ID(0x004b), RP_CAP(8, 0) }, /* INF Plus, Octa */
824 { RP_ID(0x004c), RP_CAP(8, 0) }, /* INF III, Octa */
825 { RP_ID(0x004d), RP_CAP(4, 0) }, /* INF III, Quad */
826 { RP_ID(0x004e), RP_CAP(2, 0) }, /* INF Plus, 2, RS232 */
827 { RP_ID(0x004f), RP_CAP(2, 1) }, /* INF Plus, 2, SMPTE */
828 { RP_ID(0x0050), RP_CAP(4, 0) }, /* INF Plus, Quad, RJ45 */
829 { RP_ID(0x0051), RP_CAP(8, 0) }, /* INF Plus, Octa, RJ45 */
830 { RP_ID(0x0052), RP_CAP(8, 1) }, /* INF Octa, SMPTE */
831
832 /* RocketPort EXPRESS cards */
833
834 { RP_ID(0x0060), RP_CAP(8, 0) }, /* EXP Octa, RJ45, selectable */
835 { RP_ID(0x0061), RP_CAP(32, 0) }, /* EXP 32, ext interface */
836 { RP_ID(0x0062), RP_CAP(8, 0) }, /* EXP Octa, ext interface */
837 { RP_ID(0x0063), RP_CAP(16, 0) }, /* EXP 16, ext interface */
838 { RP_ID(0x0064), RP_CAP(4, 0) }, /* EXP Quad, DB, selectable */
839 { RP_ID(0x0065), RP_CAP(8, 0) }, /* EXP Octa, DB, selectable */
840 { RP_ID(0x0066), RP_CAP(4, 0) }, /* EXP Quad, ext interface */
841 { RP_ID(0x0067), RP_CAP(4, 0) }, /* EXP Quad, RJ45 */
842 { RP_ID(0x0068), RP_CAP(8, 0) }, /* EXP Octa, RJ11 */
843 { RP_ID(0x0072), RP_CAP(8, 1) }, /* EXP Octa, SMPTE */
844 { }
845 };
846 MODULE_DEVICE_TABLE(pci, rp2_pci_tbl);
847
848 static struct pci_driver rp2_pci_driver = {
849 .name = DRV_NAME,
850 .id_table = rp2_pci_tbl,
851 .probe = rp2_probe,
852 .remove = rp2_remove,
853 };
854
855 static int __init rp2_uart_init(void)
856 {
857 int rc;
858
859 rc = uart_register_driver(&rp2_uart_driver);
860 if (rc)
861 return rc;
862
863 rc = pci_register_driver(&rp2_pci_driver);
864 if (rc) {
865 uart_unregister_driver(&rp2_uart_driver);
866 return rc;
867 }
868
869 return 0;
870 }
871
872 static void __exit rp2_uart_exit(void)
873 {
874 pci_unregister_driver(&rp2_pci_driver);
875 uart_unregister_driver(&rp2_uart_driver);
876 }
877
878 module_init(rp2_uart_init);
879 module_exit(rp2_uart_exit);
880
881 MODULE_DESCRIPTION("Comtrol RocketPort EXPRESS/INFINITY driver");
882 MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
883 MODULE_LICENSE("GPL v2");
884 MODULE_FIRMWARE(RP2_FW_NAME);
Linux with added FPC-III support