?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.16.11
[linux/fpc-iii.git] / drivers / usb / chipidea / udc.c
blob9852ec5e6e017e91049d1ecd082137c3eb53ce5f
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * udc.c - ChipIdea UDC driver
4 *
5 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
6 *
7 * Author: David Lopo
8 */
9
10 #include <linux/delay.h>
11 #include <linux/device.h>
12 #include <linux/dmapool.h>
13 #include <linux/err.h>
14 #include <linux/irqreturn.h>
15 #include <linux/kernel.h>
16 #include <linux/slab.h>
17 #include <linux/pm_runtime.h>
18 #include <linux/usb/ch9.h>
19 #include <linux/usb/gadget.h>
20 #include <linux/usb/otg-fsm.h>
21 #include <linux/usb/chipidea.h>
22
23 #include "ci.h"
24 #include "udc.h"
25 #include "bits.h"
26 #include "otg.h"
27 #include "otg_fsm.h"
28
29 /* control endpoint description */
30 static const struct usb_endpoint_descriptor
31 ctrl_endpt_out_desc = {
32 .bLength = USB_DT_ENDPOINT_SIZE,
33 .bDescriptorType = USB_DT_ENDPOINT,
34
35 .bEndpointAddress = USB_DIR_OUT,
36 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
37 .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
38 };
39
40 static const struct usb_endpoint_descriptor
41 ctrl_endpt_in_desc = {
42 .bLength = USB_DT_ENDPOINT_SIZE,
43 .bDescriptorType = USB_DT_ENDPOINT,
44
45 .bEndpointAddress = USB_DIR_IN,
46 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
47 .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
48 };
49
50 /**
51 * hw_ep_bit: calculates the bit number
52 * @num: endpoint number
53 * @dir: endpoint direction
54 *
55 * This function returns bit number
56 */
57 static inline int hw_ep_bit(int num, int dir)
58 {
59 return num + ((dir == TX) ? 16 : 0);
60 }
61
62 static inline int ep_to_bit(struct ci_hdrc *ci, int n)
63 {
64 int fill = 16 - ci->hw_ep_max / 2;
65
66 if (n >= ci->hw_ep_max / 2)
67 n += fill;
68
69 return n;
70 }
71
72 /**
73 * hw_device_state: enables/disables interrupts (execute without interruption)
74 * @dma: 0 => disable, !0 => enable and set dma engine
75 *
76 * This function returns an error code
77 */
78 static int hw_device_state(struct ci_hdrc *ci, u32 dma)
79 {
80 if (dma) {
81 hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
82 /* interrupt, error, port change, reset, sleep/suspend */
83 hw_write(ci, OP_USBINTR, ~0,
84 USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
85 } else {
86 hw_write(ci, OP_USBINTR, ~0, 0);
87 }
88 return 0;
89 }
90
91 /**
92 * hw_ep_flush: flush endpoint fifo (execute without interruption)
93 * @num: endpoint number
94 * @dir: endpoint direction
95 *
96 * This function returns an error code
97 */
98 static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
99 {
100 int n = hw_ep_bit(num, dir);
101
102 do {
103 /* flush any pending transfer */
104 hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
105 while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
106 cpu_relax();
107 } while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
108
109 return 0;
110 }
111
112 /**
113 * hw_ep_disable: disables endpoint (execute without interruption)
114 * @num: endpoint number
115 * @dir: endpoint direction
116 *
117 * This function returns an error code
118 */
119 static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
120 {
121 hw_write(ci, OP_ENDPTCTRL + num,
122 (dir == TX) ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
123 return 0;
124 }
125
126 /**
127 * hw_ep_enable: enables endpoint (execute without interruption)
128 * @num: endpoint number
129 * @dir: endpoint direction
130 * @type: endpoint type
131 *
132 * This function returns an error code
133 */
134 static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
135 {
136 u32 mask, data;
137
138 if (dir == TX) {
139 mask = ENDPTCTRL_TXT; /* type */
140 data = type << __ffs(mask);
141
142 mask |= ENDPTCTRL_TXS; /* unstall */
143 mask |= ENDPTCTRL_TXR; /* reset data toggle */
144 data |= ENDPTCTRL_TXR;
145 mask |= ENDPTCTRL_TXE; /* enable */
146 data |= ENDPTCTRL_TXE;
147 } else {
148 mask = ENDPTCTRL_RXT; /* type */
149 data = type << __ffs(mask);
150
151 mask |= ENDPTCTRL_RXS; /* unstall */
152 mask |= ENDPTCTRL_RXR; /* reset data toggle */
153 data |= ENDPTCTRL_RXR;
154 mask |= ENDPTCTRL_RXE; /* enable */
155 data |= ENDPTCTRL_RXE;
156 }
157 hw_write(ci, OP_ENDPTCTRL + num, mask, data);
158 return 0;
159 }
160
161 /**
162 * hw_ep_get_halt: return endpoint halt status
163 * @num: endpoint number
164 * @dir: endpoint direction
165 *
166 * This function returns 1 if endpoint halted
167 */
168 static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
169 {
170 u32 mask = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
171
172 return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
173 }
174
175 /**
176 * hw_ep_prime: primes endpoint (execute without interruption)
177 * @num: endpoint number
178 * @dir: endpoint direction
179 * @is_ctrl: true if control endpoint
180 *
181 * This function returns an error code
182 */
183 static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
184 {
185 int n = hw_ep_bit(num, dir);
186
187 /* Synchronize before ep prime */
188 wmb();
189
190 if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
191 return -EAGAIN;
192
193 hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
194
195 while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
196 cpu_relax();
197 if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
198 return -EAGAIN;
199
200 /* status shoult be tested according with manual but it doesn't work */
201 return 0;
202 }
203
204 /**
205 * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
206 * without interruption)
207 * @num: endpoint number
208 * @dir: endpoint direction
209 * @value: true => stall, false => unstall
210 *
211 * This function returns an error code
212 */
213 static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
214 {
215 if (value != 0 && value != 1)
216 return -EINVAL;
217
218 do {
219 enum ci_hw_regs reg = OP_ENDPTCTRL + num;
220 u32 mask_xs = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
221 u32 mask_xr = (dir == TX) ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
222
223 /* data toggle - reserved for EP0 but it's in ESS */
224 hw_write(ci, reg, mask_xs|mask_xr,
225 value ? mask_xs : mask_xr);
226 } while (value != hw_ep_get_halt(ci, num, dir));
227
228 return 0;
229 }
230
231 /**
232 * hw_is_port_high_speed: test if port is high speed
233 *
234 * This function returns true if high speed port
235 */
236 static int hw_port_is_high_speed(struct ci_hdrc *ci)
237 {
238 return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
239 hw_read(ci, OP_PORTSC, PORTSC_HSP);
240 }
241
242 /**
243 * hw_test_and_clear_complete: test & clear complete status (execute without
244 * interruption)
245 * @n: endpoint number
246 *
247 * This function returns complete status
248 */
249 static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
250 {
251 n = ep_to_bit(ci, n);
252 return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
253 }
254
255 /**
256 * hw_test_and_clear_intr_active: test & clear active interrupts (execute
257 * without interruption)
258 *
259 * This function returns active interrutps
260 */
261 static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
262 {
263 u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
264
265 hw_write(ci, OP_USBSTS, ~0, reg);
266 return reg;
267 }
268
269 /**
270 * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
271 * interruption)
272 *
273 * This function returns guard value
274 */
275 static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
276 {
277 return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
278 }
279
280 /**
281 * hw_test_and_set_setup_guard: test & set setup guard (execute without
282 * interruption)
283 *
284 * This function returns guard value
285 */
286 static int hw_test_and_set_setup_guard(struct ci_hdrc *ci)
287 {
288 return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
289 }
290
291 /**
292 * hw_usb_set_address: configures USB address (execute without interruption)
293 * @value: new USB address
294 *
295 * This function explicitly sets the address, without the "USBADRA" (advance)
296 * feature, which is not supported by older versions of the controller.
297 */
298 static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
299 {
300 hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
301 value << __ffs(DEVICEADDR_USBADR));
302 }
303
304 /**
305 * hw_usb_reset: restart device after a bus reset (execute without
306 * interruption)
307 *
308 * This function returns an error code
309 */
310 static int hw_usb_reset(struct ci_hdrc *ci)
311 {
312 hw_usb_set_address(ci, 0);
313
314 /* ESS flushes only at end?!? */
315 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
316
317 /* clear setup token semaphores */
318 hw_write(ci, OP_ENDPTSETUPSTAT, 0, 0);
319
320 /* clear complete status */
321 hw_write(ci, OP_ENDPTCOMPLETE, 0, 0);
322
323 /* wait until all bits cleared */
324 while (hw_read(ci, OP_ENDPTPRIME, ~0))
325 udelay(10); /* not RTOS friendly */
326
327 /* reset all endpoints ? */
328
329 /* reset internal status and wait for further instructions
330 no need to verify the port reset status (ESS does it) */
331
332 return 0;
333 }
334
335 /******************************************************************************
336 * UTIL block
337 *****************************************************************************/
338
339 static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
340 unsigned length)
341 {
342 int i;
343 u32 temp;
344 struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node),
345 GFP_ATOMIC);
346
347 if (node == NULL)
348 return -ENOMEM;
349
350 node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, &node->dma);
351 if (node->ptr == NULL) {
352 kfree(node);
353 return -ENOMEM;
354 }
355
356 node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
357 node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
358 node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
359 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
360 u32 mul = hwreq->req.length / hwep->ep.maxpacket;
361
362 if (hwreq->req.length == 0
363 || hwreq->req.length % hwep->ep.maxpacket)
364 mul++;
365 node->ptr->token |= cpu_to_le32(mul << __ffs(TD_MULTO));
366 }
367
368 temp = (u32) (hwreq->req.dma + hwreq->req.actual);
369 if (length) {
370 node->ptr->page[0] = cpu_to_le32(temp);
371 for (i = 1; i < TD_PAGE_COUNT; i++) {
372 u32 page = temp + i * CI_HDRC_PAGE_SIZE;
373 page &= ~TD_RESERVED_MASK;
374 node->ptr->page[i] = cpu_to_le32(page);
375 }
376 }
377
378 hwreq->req.actual += length;
379
380 if (!list_empty(&hwreq->tds)) {
381 /* get the last entry */
382 lastnode = list_entry(hwreq->tds.prev,
383 struct td_node, td);
384 lastnode->ptr->next = cpu_to_le32(node->dma);
385 }
386
387 INIT_LIST_HEAD(&node->td);
388 list_add_tail(&node->td, &hwreq->tds);
389
390 return 0;
391 }
392
393 /**
394 * _usb_addr: calculates endpoint address from direction & number
395 * @ep: endpoint
396 */
397 static inline u8 _usb_addr(struct ci_hw_ep *ep)
398 {
399 return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
400 }
401
402 /**
403 * _hardware_enqueue: configures a request at hardware level
404 * @hwep: endpoint
405 * @hwreq: request
406 *
407 * This function returns an error code
408 */
409 static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
410 {
411 struct ci_hdrc *ci = hwep->ci;
412 int ret = 0;
413 unsigned rest = hwreq->req.length;
414 int pages = TD_PAGE_COUNT;
415 struct td_node *firstnode, *lastnode;
416
417 /* don't queue twice */
418 if (hwreq->req.status == -EALREADY)
419 return -EALREADY;
420
421 hwreq->req.status = -EALREADY;
422
423 ret = usb_gadget_map_request_by_dev(ci->dev->parent,
424 &hwreq->req, hwep->dir);
425 if (ret)
426 return ret;
427
428 /*
429 * The first buffer could be not page aligned.
430 * In that case we have to span into one extra td.
431 */
432 if (hwreq->req.dma % PAGE_SIZE)
433 pages--;
434
435 if (rest == 0) {
436 ret = add_td_to_list(hwep, hwreq, 0);
437 if (ret < 0)
438 goto done;
439 }
440
441 while (rest > 0) {
442 unsigned count = min(hwreq->req.length - hwreq->req.actual,
443 (unsigned)(pages * CI_HDRC_PAGE_SIZE));
444 ret = add_td_to_list(hwep, hwreq, count);
445 if (ret < 0)
446 goto done;
447
448 rest -= count;
449 }
450
451 if (hwreq->req.zero && hwreq->req.length && hwep->dir == TX
452 && (hwreq->req.length % hwep->ep.maxpacket == 0)) {
453 ret = add_td_to_list(hwep, hwreq, 0);
454 if (ret < 0)
455 goto done;
456 }
457
458 firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
459
460 lastnode = list_entry(hwreq->tds.prev,
461 struct td_node, td);
462
463 lastnode->ptr->next = cpu_to_le32(TD_TERMINATE);
464 if (!hwreq->req.no_interrupt)
465 lastnode->ptr->token |= cpu_to_le32(TD_IOC);
466 wmb();
467
468 hwreq->req.actual = 0;
469 if (!list_empty(&hwep->qh.queue)) {
470 struct ci_hw_req *hwreqprev;
471 int n = hw_ep_bit(hwep->num, hwep->dir);
472 int tmp_stat;
473 struct td_node *prevlastnode;
474 u32 next = firstnode->dma & TD_ADDR_MASK;
475
476 hwreqprev = list_entry(hwep->qh.queue.prev,
477 struct ci_hw_req, queue);
478 prevlastnode = list_entry(hwreqprev->tds.prev,
479 struct td_node, td);
480
481 prevlastnode->ptr->next = cpu_to_le32(next);
482 wmb();
483 if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
484 goto done;
485 do {
486 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
487 tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
488 } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
489 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
490 if (tmp_stat)
491 goto done;
492 }
493
494 /* QH configuration */
495 hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma);
496 hwep->qh.ptr->td.token &=
497 cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
498
499 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
500 u32 mul = hwreq->req.length / hwep->ep.maxpacket;
501
502 if (hwreq->req.length == 0
503 || hwreq->req.length % hwep->ep.maxpacket)
504 mul++;
505 hwep->qh.ptr->cap |= cpu_to_le32(mul << __ffs(QH_MULT));
506 }
507
508 ret = hw_ep_prime(ci, hwep->num, hwep->dir,
509 hwep->type == USB_ENDPOINT_XFER_CONTROL);
510 done:
511 return ret;
512 }
513
514 /*
515 * free_pending_td: remove a pending request for the endpoint
516 * @hwep: endpoint
517 */
518 static void free_pending_td(struct ci_hw_ep *hwep)
519 {
520 struct td_node *pending = hwep->pending_td;
521
522 dma_pool_free(hwep->td_pool, pending->ptr, pending->dma);
523 hwep->pending_td = NULL;
524 kfree(pending);
525 }
526
527 static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
528 struct td_node *node)
529 {
530 hwep->qh.ptr->td.next = cpu_to_le32(node->dma);
531 hwep->qh.ptr->td.token &=
532 cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
533
534 return hw_ep_prime(ci, hwep->num, hwep->dir,
535 hwep->type == USB_ENDPOINT_XFER_CONTROL);
536 }
537
538 /**
539 * _hardware_dequeue: handles a request at hardware level
540 * @gadget: gadget
541 * @hwep: endpoint
542 *
543 * This function returns an error code
544 */
545 static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
546 {
547 u32 tmptoken;
548 struct td_node *node, *tmpnode;
549 unsigned remaining_length;
550 unsigned actual = hwreq->req.length;
551 struct ci_hdrc *ci = hwep->ci;
552
553 if (hwreq->req.status != -EALREADY)
554 return -EINVAL;
555
556 hwreq->req.status = 0;
557
558 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
559 tmptoken = le32_to_cpu(node->ptr->token);
560 if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
561 int n = hw_ep_bit(hwep->num, hwep->dir);
562
563 if (ci->rev == CI_REVISION_24)
564 if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
565 reprime_dtd(ci, hwep, node);
566 hwreq->req.status = -EALREADY;
567 return -EBUSY;
568 }
569
570 remaining_length = (tmptoken & TD_TOTAL_BYTES);
571 remaining_length >>= __ffs(TD_TOTAL_BYTES);
572 actual -= remaining_length;
573
574 hwreq->req.status = tmptoken & TD_STATUS;
575 if ((TD_STATUS_HALTED & hwreq->req.status)) {
576 hwreq->req.status = -EPIPE;
577 break;
578 } else if ((TD_STATUS_DT_ERR & hwreq->req.status)) {
579 hwreq->req.status = -EPROTO;
580 break;
581 } else if ((TD_STATUS_TR_ERR & hwreq->req.status)) {
582 hwreq->req.status = -EILSEQ;
583 break;
584 }
585
586 if (remaining_length) {
587 if (hwep->dir == TX) {
588 hwreq->req.status = -EPROTO;
589 break;
590 }
591 }
592 /*
593 * As the hardware could still address the freed td
594 * which will run the udc unusable, the cleanup of the
595 * td has to be delayed by one.
596 */
597 if (hwep->pending_td)
598 free_pending_td(hwep);
599
600 hwep->pending_td = node;
601 list_del_init(&node->td);
602 }
603
604 usb_gadget_unmap_request_by_dev(hwep->ci->dev->parent,
605 &hwreq->req, hwep->dir);
606
607 hwreq->req.actual += actual;
608
609 if (hwreq->req.status)
610 return hwreq->req.status;
611
612 return hwreq->req.actual;
613 }
614
615 /**
616 * _ep_nuke: dequeues all endpoint requests
617 * @hwep: endpoint
618 *
619 * This function returns an error code
620 * Caller must hold lock
621 */
622 static int _ep_nuke(struct ci_hw_ep *hwep)
623 __releases(hwep->lock)
624 __acquires(hwep->lock)
625 {
626 struct td_node *node, *tmpnode;
627 if (hwep == NULL)
628 return -EINVAL;
629
630 hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
631
632 while (!list_empty(&hwep->qh.queue)) {
633
634 /* pop oldest request */
635 struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next,
636 struct ci_hw_req, queue);
637
638 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
639 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
640 list_del_init(&node->td);
641 node->ptr = NULL;
642 kfree(node);
643 }
644
645 list_del_init(&hwreq->queue);
646 hwreq->req.status = -ESHUTDOWN;
647
648 if (hwreq->req.complete != NULL) {
649 spin_unlock(hwep->lock);
650 usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
651 spin_lock(hwep->lock);
652 }
653 }
654
655 if (hwep->pending_td)
656 free_pending_td(hwep);
657
658 return 0;
659 }
660
661 static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
662 {
663 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
664 int direction, retval = 0;
665 unsigned long flags;
666
667 if (ep == NULL || hwep->ep.desc == NULL)
668 return -EINVAL;
669
670 if (usb_endpoint_xfer_isoc(hwep->ep.desc))
671 return -EOPNOTSUPP;
672
673 spin_lock_irqsave(hwep->lock, flags);
674
675 if (value && hwep->dir == TX && check_transfer &&
676 !list_empty(&hwep->qh.queue) &&
677 !usb_endpoint_xfer_control(hwep->ep.desc)) {
678 spin_unlock_irqrestore(hwep->lock, flags);
679 return -EAGAIN;
680 }
681
682 direction = hwep->dir;
683 do {
684 retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
685
686 if (!value)
687 hwep->wedge = 0;
688
689 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
690 hwep->dir = (hwep->dir == TX) ? RX : TX;
691
692 } while (hwep->dir != direction);
693
694 spin_unlock_irqrestore(hwep->lock, flags);
695 return retval;
696 }
697
698
699 /**
700 * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
701 * @gadget: gadget
702 *
703 * This function returns an error code
704 */
705 static int _gadget_stop_activity(struct usb_gadget *gadget)
706 {
707 struct usb_ep *ep;
708 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
709 unsigned long flags;
710
711 spin_lock_irqsave(&ci->lock, flags);
712 ci->gadget.speed = USB_SPEED_UNKNOWN;
713 ci->remote_wakeup = 0;
714 ci->suspended = 0;
715 spin_unlock_irqrestore(&ci->lock, flags);
716
717 /* flush all endpoints */
718 gadget_for_each_ep(ep, gadget) {
719 usb_ep_fifo_flush(ep);
720 }
721 usb_ep_fifo_flush(&ci->ep0out->ep);
722 usb_ep_fifo_flush(&ci->ep0in->ep);
723
724 /* make sure to disable all endpoints */
725 gadget_for_each_ep(ep, gadget) {
726 usb_ep_disable(ep);
727 }
728
729 if (ci->status != NULL) {
730 usb_ep_free_request(&ci->ep0in->ep, ci->status);
731 ci->status = NULL;
732 }
733
734 return 0;
735 }
736
737 /******************************************************************************
738 * ISR block
739 *****************************************************************************/
740 /**
741 * isr_reset_handler: USB reset interrupt handler
742 * @ci: UDC device
743 *
744 * This function resets USB engine after a bus reset occurred
745 */
746 static void isr_reset_handler(struct ci_hdrc *ci)
747 __releases(ci->lock)
748 __acquires(ci->lock)
749 {
750 int retval;
751
752 spin_unlock(&ci->lock);
753 if (ci->gadget.speed != USB_SPEED_UNKNOWN)
754 usb_gadget_udc_reset(&ci->gadget, ci->driver);
755
756 retval = _gadget_stop_activity(&ci->gadget);
757 if (retval)
758 goto done;
759
760 retval = hw_usb_reset(ci);
761 if (retval)
762 goto done;
763
764 ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
765 if (ci->status == NULL)
766 retval = -ENOMEM;
767
768 done:
769 spin_lock(&ci->lock);
770
771 if (retval)
772 dev_err(ci->dev, "error: %i\n", retval);
773 }
774
775 /**
776 * isr_get_status_complete: get_status request complete function
777 * @ep: endpoint
778 * @req: request handled
779 *
780 * Caller must release lock
781 */
782 static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
783 {
784 if (ep == NULL || req == NULL)
785 return;
786
787 kfree(req->buf);
788 usb_ep_free_request(ep, req);
789 }
790
791 /**
792 * _ep_queue: queues (submits) an I/O request to an endpoint
793 * @ep: endpoint
794 * @req: request
795 * @gfp_flags: GFP flags (not used)
796 *
797 * Caller must hold lock
798 * This function returns an error code
799 */
800 static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
801 gfp_t __maybe_unused gfp_flags)
802 {
803 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
804 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
805 struct ci_hdrc *ci = hwep->ci;
806 int retval = 0;
807
808 if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
809 return -EINVAL;
810
811 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
812 if (req->length)
813 hwep = (ci->ep0_dir == RX) ?
814 ci->ep0out : ci->ep0in;
815 if (!list_empty(&hwep->qh.queue)) {
816 _ep_nuke(hwep);
817 dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n",
818 _usb_addr(hwep));
819 }
820 }
821
822 if (usb_endpoint_xfer_isoc(hwep->ep.desc) &&
823 hwreq->req.length > hwep->ep.mult * hwep->ep.maxpacket) {
824 dev_err(hwep->ci->dev, "request length too big for isochronous\n");
825 return -EMSGSIZE;
826 }
827
828 /* first nuke then test link, e.g. previous status has not sent */
829 if (!list_empty(&hwreq->queue)) {
830 dev_err(hwep->ci->dev, "request already in queue\n");
831 return -EBUSY;
832 }
833
834 /* push request */
835 hwreq->req.status = -EINPROGRESS;
836 hwreq->req.actual = 0;
837
838 retval = _hardware_enqueue(hwep, hwreq);
839
840 if (retval == -EALREADY)
841 retval = 0;
842 if (!retval)
843 list_add_tail(&hwreq->queue, &hwep->qh.queue);
844
845 return retval;
846 }
847
848 /**
849 * isr_get_status_response: get_status request response
850 * @ci: ci struct
851 * @setup: setup request packet
852 *
853 * This function returns an error code
854 */
855 static int isr_get_status_response(struct ci_hdrc *ci,
856 struct usb_ctrlrequest *setup)
857 __releases(hwep->lock)
858 __acquires(hwep->lock)
859 {
860 struct ci_hw_ep *hwep = ci->ep0in;
861 struct usb_request *req = NULL;
862 gfp_t gfp_flags = GFP_ATOMIC;
863 int dir, num, retval;
864
865 if (hwep == NULL || setup == NULL)
866 return -EINVAL;
867
868 spin_unlock(hwep->lock);
869 req = usb_ep_alloc_request(&hwep->ep, gfp_flags);
870 spin_lock(hwep->lock);
871 if (req == NULL)
872 return -ENOMEM;
873
874 req->complete = isr_get_status_complete;
875 req->length = 2;
876 req->buf = kzalloc(req->length, gfp_flags);
877 if (req->buf == NULL) {
878 retval = -ENOMEM;
879 goto err_free_req;
880 }
881
882 if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
883 *(u16 *)req->buf = (ci->remote_wakeup << 1) |
884 ci->gadget.is_selfpowered;
885 } else if ((setup->bRequestType & USB_RECIP_MASK) \
886 == USB_RECIP_ENDPOINT) {
887 dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
888 TX : RX;
889 num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
890 *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
891 }
892 /* else do nothing; reserved for future use */
893
894 retval = _ep_queue(&hwep->ep, req, gfp_flags);
895 if (retval)
896 goto err_free_buf;
897
898 return 0;
899
900 err_free_buf:
901 kfree(req->buf);
902 err_free_req:
903 spin_unlock(hwep->lock);
904 usb_ep_free_request(&hwep->ep, req);
905 spin_lock(hwep->lock);
906 return retval;
907 }
908
909 /**
910 * isr_setup_status_complete: setup_status request complete function
911 * @ep: endpoint
912 * @req: request handled
913 *
914 * Caller must release lock. Put the port in test mode if test mode
915 * feature is selected.
916 */
917 static void
918 isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
919 {
920 struct ci_hdrc *ci = req->context;
921 unsigned long flags;
922
923 if (ci->setaddr) {
924 hw_usb_set_address(ci, ci->address);
925 ci->setaddr = false;
926 if (ci->address)
927 usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS);
928 }
929
930 spin_lock_irqsave(&ci->lock, flags);
931 if (ci->test_mode)
932 hw_port_test_set(ci, ci->test_mode);
933 spin_unlock_irqrestore(&ci->lock, flags);
934 }
935
936 /**
937 * isr_setup_status_phase: queues the status phase of a setup transation
938 * @ci: ci struct
939 *
940 * This function returns an error code
941 */
942 static int isr_setup_status_phase(struct ci_hdrc *ci)
943 {
944 struct ci_hw_ep *hwep;
945
946 /*
947 * Unexpected USB controller behavior, caused by bad signal integrity
948 * or ground reference problems, can lead to isr_setup_status_phase
949 * being called with ci->status equal to NULL.
950 * If this situation occurs, you should review your USB hardware design.
951 */
952 if (WARN_ON_ONCE(!ci->status))
953 return -EPIPE;
954
955 hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
956 ci->status->context = ci;
957 ci->status->complete = isr_setup_status_complete;
958
959 return _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC);
960 }
961
962 /**
963 * isr_tr_complete_low: transaction complete low level handler
964 * @hwep: endpoint
965 *
966 * This function returns an error code
967 * Caller must hold lock
968 */
969 static int isr_tr_complete_low(struct ci_hw_ep *hwep)
970 __releases(hwep->lock)
971 __acquires(hwep->lock)
972 {
973 struct ci_hw_req *hwreq, *hwreqtemp;
974 struct ci_hw_ep *hweptemp = hwep;
975 int retval = 0;
976
977 list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue,
978 queue) {
979 retval = _hardware_dequeue(hwep, hwreq);
980 if (retval < 0)
981 break;
982 list_del_init(&hwreq->queue);
983 if (hwreq->req.complete != NULL) {
984 spin_unlock(hwep->lock);
985 if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
986 hwreq->req.length)
987 hweptemp = hwep->ci->ep0in;
988 usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req);
989 spin_lock(hwep->lock);
990 }
991 }
992
993 if (retval == -EBUSY)
994 retval = 0;
995
996 return retval;
997 }
998
999 static int otg_a_alt_hnp_support(struct ci_hdrc *ci)
1000 {
1001 dev_warn(&ci->gadget.dev,
1002 "connect the device to an alternate port if you want HNP\n");
1003 return isr_setup_status_phase(ci);
1004 }
1005
1006 /**
1007 * isr_setup_packet_handler: setup packet handler
1008 * @ci: UDC descriptor
1009 *
1010 * This function handles setup packet
1011 */
1012 static void isr_setup_packet_handler(struct ci_hdrc *ci)
1013 __releases(ci->lock)
1014 __acquires(ci->lock)
1015 {
1016 struct ci_hw_ep *hwep = &ci->ci_hw_ep[0];
1017 struct usb_ctrlrequest req;
1018 int type, num, dir, err = -EINVAL;
1019 u8 tmode = 0;
1020
1021 /*
1022 * Flush data and handshake transactions of previous
1023 * setup packet.
1024 */
1025 _ep_nuke(ci->ep0out);
1026 _ep_nuke(ci->ep0in);
1027
1028 /* read_setup_packet */
1029 do {
1030 hw_test_and_set_setup_guard(ci);
1031 memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
1032 } while (!hw_test_and_clear_setup_guard(ci));
1033
1034 type = req.bRequestType;
1035
1036 ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
1037
1038 switch (req.bRequest) {
1039 case USB_REQ_CLEAR_FEATURE:
1040 if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
1041 le16_to_cpu(req.wValue) ==
1042 USB_ENDPOINT_HALT) {
1043 if (req.wLength != 0)
1044 break;
1045 num = le16_to_cpu(req.wIndex);
1046 dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
1047 num &= USB_ENDPOINT_NUMBER_MASK;
1048 if (dir == TX)
1049 num += ci->hw_ep_max / 2;
1050 if (!ci->ci_hw_ep[num].wedge) {
1051 spin_unlock(&ci->lock);
1052 err = usb_ep_clear_halt(
1053 &ci->ci_hw_ep[num].ep);
1054 spin_lock(&ci->lock);
1055 if (err)
1056 break;
1057 }
1058 err = isr_setup_status_phase(ci);
1059 } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
1060 le16_to_cpu(req.wValue) ==
1061 USB_DEVICE_REMOTE_WAKEUP) {
1062 if (req.wLength != 0)
1063 break;
1064 ci->remote_wakeup = 0;
1065 err = isr_setup_status_phase(ci);
1066 } else {
1067 goto delegate;
1068 }
1069 break;
1070 case USB_REQ_GET_STATUS:
1071 if ((type != (USB_DIR_IN|USB_RECIP_DEVICE) ||
1072 le16_to_cpu(req.wIndex) == OTG_STS_SELECTOR) &&
1073 type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
1074 type != (USB_DIR_IN|USB_RECIP_INTERFACE))
1075 goto delegate;
1076 if (le16_to_cpu(req.wLength) != 2 ||
1077 le16_to_cpu(req.wValue) != 0)
1078 break;
1079 err = isr_get_status_response(ci, &req);
1080 break;
1081 case USB_REQ_SET_ADDRESS:
1082 if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
1083 goto delegate;
1084 if (le16_to_cpu(req.wLength) != 0 ||
1085 le16_to_cpu(req.wIndex) != 0)
1086 break;
1087 ci->address = (u8)le16_to_cpu(req.wValue);
1088 ci->setaddr = true;
1089 err = isr_setup_status_phase(ci);
1090 break;
1091 case USB_REQ_SET_FEATURE:
1092 if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
1093 le16_to_cpu(req.wValue) ==
1094 USB_ENDPOINT_HALT) {
1095 if (req.wLength != 0)
1096 break;
1097 num = le16_to_cpu(req.wIndex);
1098 dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
1099 num &= USB_ENDPOINT_NUMBER_MASK;
1100 if (dir == TX)
1101 num += ci->hw_ep_max / 2;
1102
1103 spin_unlock(&ci->lock);
1104 err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
1105 spin_lock(&ci->lock);
1106 if (!err)
1107 isr_setup_status_phase(ci);
1108 } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
1109 if (req.wLength != 0)
1110 break;
1111 switch (le16_to_cpu(req.wValue)) {
1112 case USB_DEVICE_REMOTE_WAKEUP:
1113 ci->remote_wakeup = 1;
1114 err = isr_setup_status_phase(ci);
1115 break;
1116 case USB_DEVICE_TEST_MODE:
1117 tmode = le16_to_cpu(req.wIndex) >> 8;
1118 switch (tmode) {
1119 case TEST_J:
1120 case TEST_K:
1121 case TEST_SE0_NAK:
1122 case TEST_PACKET:
1123 case TEST_FORCE_EN:
1124 ci->test_mode = tmode;
1125 err = isr_setup_status_phase(
1126 ci);
1127 break;
1128 default:
1129 break;
1130 }
1131 break;
1132 case USB_DEVICE_B_HNP_ENABLE:
1133 if (ci_otg_is_fsm_mode(ci)) {
1134 ci->gadget.b_hnp_enable = 1;
1135 err = isr_setup_status_phase(
1136 ci);
1137 }
1138 break;
1139 case USB_DEVICE_A_ALT_HNP_SUPPORT:
1140 if (ci_otg_is_fsm_mode(ci))
1141 err = otg_a_alt_hnp_support(ci);
1142 break;
1143 case USB_DEVICE_A_HNP_SUPPORT:
1144 if (ci_otg_is_fsm_mode(ci)) {
1145 ci->gadget.a_hnp_support = 1;
1146 err = isr_setup_status_phase(
1147 ci);
1148 }
1149 break;
1150 default:
1151 goto delegate;
1152 }
1153 } else {
1154 goto delegate;
1155 }
1156 break;
1157 default:
1158 delegate:
1159 if (req.wLength == 0) /* no data phase */
1160 ci->ep0_dir = TX;
1161
1162 spin_unlock(&ci->lock);
1163 err = ci->driver->setup(&ci->gadget, &req);
1164 spin_lock(&ci->lock);
1165 break;
1166 }
1167
1168 if (err < 0) {
1169 spin_unlock(&ci->lock);
1170 if (_ep_set_halt(&hwep->ep, 1, false))
1171 dev_err(ci->dev, "error: _ep_set_halt\n");
1172 spin_lock(&ci->lock);
1173 }
1174 }
1175
1176 /**
1177 * isr_tr_complete_handler: transaction complete interrupt handler
1178 * @ci: UDC descriptor
1179 *
1180 * This function handles traffic events
1181 */
1182 static void isr_tr_complete_handler(struct ci_hdrc *ci)
1183 __releases(ci->lock)
1184 __acquires(ci->lock)
1185 {
1186 unsigned i;
1187 int err;
1188
1189 for (i = 0; i < ci->hw_ep_max; i++) {
1190 struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
1191
1192 if (hwep->ep.desc == NULL)
1193 continue; /* not configured */
1194
1195 if (hw_test_and_clear_complete(ci, i)) {
1196 err = isr_tr_complete_low(hwep);
1197 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
1198 if (err > 0) /* needs status phase */
1199 err = isr_setup_status_phase(ci);
1200 if (err < 0) {
1201 spin_unlock(&ci->lock);
1202 if (_ep_set_halt(&hwep->ep, 1, false))
1203 dev_err(ci->dev,
1204 "error: _ep_set_halt\n");
1205 spin_lock(&ci->lock);
1206 }
1207 }
1208 }
1209
1210 /* Only handle setup packet below */
1211 if (i == 0 &&
1212 hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
1213 isr_setup_packet_handler(ci);
1214 }
1215 }
1216
1217 /******************************************************************************
1218 * ENDPT block
1219 *****************************************************************************/
1220 /**
1221 * ep_enable: configure endpoint, making it usable
1222 *
1223 * Check usb_ep_enable() at "usb_gadget.h" for details
1224 */
1225 static int ep_enable(struct usb_ep *ep,
1226 const struct usb_endpoint_descriptor *desc)
1227 {
1228 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1229 int retval = 0;
1230 unsigned long flags;
1231 u32 cap = 0;
1232
1233 if (ep == NULL || desc == NULL)
1234 return -EINVAL;
1235
1236 spin_lock_irqsave(hwep->lock, flags);
1237
1238 /* only internal SW should enable ctrl endpts */
1239
1240 if (!list_empty(&hwep->qh.queue)) {
1241 dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
1242 spin_unlock_irqrestore(hwep->lock, flags);
1243 return -EBUSY;
1244 }
1245
1246 hwep->ep.desc = desc;
1247
1248 hwep->dir = usb_endpoint_dir_in(desc) ? TX : RX;
1249 hwep->num = usb_endpoint_num(desc);
1250 hwep->type = usb_endpoint_type(desc);
1251
1252 hwep->ep.maxpacket = usb_endpoint_maxp(desc);
1253 hwep->ep.mult = usb_endpoint_maxp_mult(desc);
1254
1255 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1256 cap |= QH_IOS;
1257
1258 cap |= QH_ZLT;
1259 cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
1260 /*
1261 * For ISO-TX, we set mult at QH as the largest value, and use
1262 * MultO at TD as real mult value.
1263 */
1264 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
1265 cap |= 3 << __ffs(QH_MULT);
1266
1267 hwep->qh.ptr->cap = cpu_to_le32(cap);
1268
1269 hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */
1270
1271 if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
1272 dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
1273 retval = -EINVAL;
1274 }
1275
1276 /*
1277 * Enable endpoints in the HW other than ep0 as ep0
1278 * is always enabled
1279 */
1280 if (hwep->num)
1281 retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir,
1282 hwep->type);
1283
1284 spin_unlock_irqrestore(hwep->lock, flags);
1285 return retval;
1286 }
1287
1288 /**
1289 * ep_disable: endpoint is no longer usable
1290 *
1291 * Check usb_ep_disable() at "usb_gadget.h" for details
1292 */
1293 static int ep_disable(struct usb_ep *ep)
1294 {
1295 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1296 int direction, retval = 0;
1297 unsigned long flags;
1298
1299 if (ep == NULL)
1300 return -EINVAL;
1301 else if (hwep->ep.desc == NULL)
1302 return -EBUSY;
1303
1304 spin_lock_irqsave(hwep->lock, flags);
1305
1306 /* only internal SW should disable ctrl endpts */
1307
1308 direction = hwep->dir;
1309 do {
1310 retval |= _ep_nuke(hwep);
1311 retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir);
1312
1313 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1314 hwep->dir = (hwep->dir == TX) ? RX : TX;
1315
1316 } while (hwep->dir != direction);
1317
1318 hwep->ep.desc = NULL;
1319
1320 spin_unlock_irqrestore(hwep->lock, flags);
1321 return retval;
1322 }
1323
1324 /**
1325 * ep_alloc_request: allocate a request object to use with this endpoint
1326 *
1327 * Check usb_ep_alloc_request() at "usb_gadget.h" for details
1328 */
1329 static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
1330 {
1331 struct ci_hw_req *hwreq = NULL;
1332
1333 if (ep == NULL)
1334 return NULL;
1335
1336 hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags);
1337 if (hwreq != NULL) {
1338 INIT_LIST_HEAD(&hwreq->queue);
1339 INIT_LIST_HEAD(&hwreq->tds);
1340 }
1341
1342 return (hwreq == NULL) ? NULL : &hwreq->req;
1343 }
1344
1345 /**
1346 * ep_free_request: frees a request object
1347 *
1348 * Check usb_ep_free_request() at "usb_gadget.h" for details
1349 */
1350 static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
1351 {
1352 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1353 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1354 struct td_node *node, *tmpnode;
1355 unsigned long flags;
1356
1357 if (ep == NULL || req == NULL) {
1358 return;
1359 } else if (!list_empty(&hwreq->queue)) {
1360 dev_err(hwep->ci->dev, "freeing queued request\n");
1361 return;
1362 }
1363
1364 spin_lock_irqsave(hwep->lock, flags);
1365
1366 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
1367 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
1368 list_del_init(&node->td);
1369 node->ptr = NULL;
1370 kfree(node);
1371 }
1372
1373 kfree(hwreq);
1374
1375 spin_unlock_irqrestore(hwep->lock, flags);
1376 }
1377
1378 /**
1379 * ep_queue: queues (submits) an I/O request to an endpoint
1380 *
1381 * Check usb_ep_queue()* at usb_gadget.h" for details
1382 */
1383 static int ep_queue(struct usb_ep *ep, struct usb_request *req,
1384 gfp_t __maybe_unused gfp_flags)
1385 {
1386 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1387 int retval = 0;
1388 unsigned long flags;
1389
1390 if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
1391 return -EINVAL;
1392
1393 spin_lock_irqsave(hwep->lock, flags);
1394 retval = _ep_queue(ep, req, gfp_flags);
1395 spin_unlock_irqrestore(hwep->lock, flags);
1396 return retval;
1397 }
1398
1399 /**
1400 * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
1401 *
1402 * Check usb_ep_dequeue() at "usb_gadget.h" for details
1403 */
1404 static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
1405 {
1406 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1407 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1408 unsigned long flags;
1409 struct td_node *node, *tmpnode;
1410
1411 if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
1412 hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
1413 list_empty(&hwep->qh.queue))
1414 return -EINVAL;
1415
1416 spin_lock_irqsave(hwep->lock, flags);
1417
1418 hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1419
1420 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
1421 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
1422 list_del(&node->td);
1423 kfree(node);
1424 }
1425
1426 /* pop request */
1427 list_del_init(&hwreq->queue);
1428
1429 usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir);
1430
1431 req->status = -ECONNRESET;
1432
1433 if (hwreq->req.complete != NULL) {
1434 spin_unlock(hwep->lock);
1435 usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
1436 spin_lock(hwep->lock);
1437 }
1438
1439 spin_unlock_irqrestore(hwep->lock, flags);
1440 return 0;
1441 }
1442
1443 /**
1444 * ep_set_halt: sets the endpoint halt feature
1445 *
1446 * Check usb_ep_set_halt() at "usb_gadget.h" for details
1447 */
1448 static int ep_set_halt(struct usb_ep *ep, int value)
1449 {
1450 return _ep_set_halt(ep, value, true);
1451 }
1452
1453 /**
1454 * ep_set_wedge: sets the halt feature and ignores clear requests
1455 *
1456 * Check usb_ep_set_wedge() at "usb_gadget.h" for details
1457 */
1458 static int ep_set_wedge(struct usb_ep *ep)
1459 {
1460 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1461 unsigned long flags;
1462
1463 if (ep == NULL || hwep->ep.desc == NULL)
1464 return -EINVAL;
1465
1466 spin_lock_irqsave(hwep->lock, flags);
1467 hwep->wedge = 1;
1468 spin_unlock_irqrestore(hwep->lock, flags);
1469
1470 return usb_ep_set_halt(ep);
1471 }
1472
1473 /**
1474 * ep_fifo_flush: flushes contents of a fifo
1475 *
1476 * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
1477 */
1478 static void ep_fifo_flush(struct usb_ep *ep)
1479 {
1480 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1481 unsigned long flags;
1482
1483 if (ep == NULL) {
1484 dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep));
1485 return;
1486 }
1487
1488 spin_lock_irqsave(hwep->lock, flags);
1489
1490 hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1491
1492 spin_unlock_irqrestore(hwep->lock, flags);
1493 }
1494
1495 /**
1496 * Endpoint-specific part of the API to the USB controller hardware
1497 * Check "usb_gadget.h" for details
1498 */
1499 static const struct usb_ep_ops usb_ep_ops = {
1500 .enable = ep_enable,
1501 .disable = ep_disable,
1502 .alloc_request = ep_alloc_request,
1503 .free_request = ep_free_request,
1504 .queue = ep_queue,
1505 .dequeue = ep_dequeue,
1506 .set_halt = ep_set_halt,
1507 .set_wedge = ep_set_wedge,
1508 .fifo_flush = ep_fifo_flush,
1509 };
1510
1511 /******************************************************************************
1512 * GADGET block
1513 *****************************************************************************/
1514 static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
1515 {
1516 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1517 unsigned long flags;
1518 int gadget_ready = 0;
1519
1520 spin_lock_irqsave(&ci->lock, flags);
1521 ci->vbus_active = is_active;
1522 if (ci->driver)
1523 gadget_ready = 1;
1524 spin_unlock_irqrestore(&ci->lock, flags);
1525
1526 if (ci->usb_phy)
1527 usb_phy_set_charger_state(ci->usb_phy, is_active ?
1528 USB_CHARGER_PRESENT : USB_CHARGER_ABSENT);
1529
1530 if (gadget_ready) {
1531 if (is_active) {
1532 pm_runtime_get_sync(&_gadget->dev);
1533 hw_device_reset(ci);
1534 hw_device_state(ci, ci->ep0out->qh.dma);
1535 usb_gadget_set_state(_gadget, USB_STATE_POWERED);
1536 usb_udc_vbus_handler(_gadget, true);
1537 } else {
1538 usb_udc_vbus_handler(_gadget, false);
1539 if (ci->driver)
1540 ci->driver->disconnect(&ci->gadget);
1541 hw_device_state(ci, 0);
1542 if (ci->platdata->notify_event)
1543 ci->platdata->notify_event(ci,
1544 CI_HDRC_CONTROLLER_STOPPED_EVENT);
1545 _gadget_stop_activity(&ci->gadget);
1546 pm_runtime_put_sync(&_gadget->dev);
1547 usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
1548 }
1549 }
1550
1551 return 0;
1552 }
1553
1554 static int ci_udc_wakeup(struct usb_gadget *_gadget)
1555 {
1556 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1557 unsigned long flags;
1558 int ret = 0;
1559
1560 spin_lock_irqsave(&ci->lock, flags);
1561 if (!ci->remote_wakeup) {
1562 ret = -EOPNOTSUPP;
1563 goto out;
1564 }
1565 if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
1566 ret = -EINVAL;
1567 goto out;
1568 }
1569 hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
1570 out:
1571 spin_unlock_irqrestore(&ci->lock, flags);
1572 return ret;
1573 }
1574
1575 static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
1576 {
1577 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1578
1579 if (ci->usb_phy)
1580 return usb_phy_set_power(ci->usb_phy, ma);
1581 return -ENOTSUPP;
1582 }
1583
1584 static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on)
1585 {
1586 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1587 struct ci_hw_ep *hwep = ci->ep0in;
1588 unsigned long flags;
1589
1590 spin_lock_irqsave(hwep->lock, flags);
1591 _gadget->is_selfpowered = (is_on != 0);
1592 spin_unlock_irqrestore(hwep->lock, flags);
1593
1594 return 0;
1595 }
1596
1597 /* Change Data+ pullup status
1598 * this func is used by usb_gadget_connect/disconnet
1599 */
1600 static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
1601 {
1602 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1603
1604 /*
1605 * Data+ pullup controlled by OTG state machine in OTG fsm mode;
1606 * and don't touch Data+ in host mode for dual role config.
1607 */
1608 if (ci_otg_is_fsm_mode(ci) || ci->role == CI_ROLE_HOST)
1609 return 0;
1610
1611 pm_runtime_get_sync(&ci->gadget.dev);
1612 if (is_on)
1613 hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
1614 else
1615 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
1616 pm_runtime_put_sync(&ci->gadget.dev);
1617
1618 return 0;
1619 }
1620
1621 static int ci_udc_start(struct usb_gadget *gadget,
1622 struct usb_gadget_driver *driver);
1623 static int ci_udc_stop(struct usb_gadget *gadget);
1624 /**
1625 * Device operations part of the API to the USB controller hardware,
1626 * which don't involve endpoints (or i/o)
1627 * Check "usb_gadget.h" for details
1628 */
1629 static const struct usb_gadget_ops usb_gadget_ops = {
1630 .vbus_session = ci_udc_vbus_session,
1631 .wakeup = ci_udc_wakeup,
1632 .set_selfpowered = ci_udc_selfpowered,
1633 .pullup = ci_udc_pullup,
1634 .vbus_draw = ci_udc_vbus_draw,
1635 .udc_start = ci_udc_start,
1636 .udc_stop = ci_udc_stop,
1637 };
1638
1639 static int init_eps(struct ci_hdrc *ci)
1640 {
1641 int retval = 0, i, j;
1642
1643 for (i = 0; i < ci->hw_ep_max/2; i++)
1644 for (j = RX; j <= TX; j++) {
1645 int k = i + j * ci->hw_ep_max/2;
1646 struct ci_hw_ep *hwep = &ci->ci_hw_ep[k];
1647
1648 scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i,
1649 (j == TX) ? "in" : "out");
1650
1651 hwep->ci = ci;
1652 hwep->lock = &ci->lock;
1653 hwep->td_pool = ci->td_pool;
1654
1655 hwep->ep.name = hwep->name;
1656 hwep->ep.ops = &usb_ep_ops;
1657
1658 if (i == 0) {
1659 hwep->ep.caps.type_control = true;
1660 } else {
1661 hwep->ep.caps.type_iso = true;
1662 hwep->ep.caps.type_bulk = true;
1663 hwep->ep.caps.type_int = true;
1664 }
1665
1666 if (j == TX)
1667 hwep->ep.caps.dir_in = true;
1668 else
1669 hwep->ep.caps.dir_out = true;
1670
1671 /*
1672 * for ep0: maxP defined in desc, for other
1673 * eps, maxP is set by epautoconfig() called
1674 * by gadget layer
1675 */
1676 usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
1677
1678 INIT_LIST_HEAD(&hwep->qh.queue);
1679 hwep->qh.ptr = dma_pool_zalloc(ci->qh_pool, GFP_KERNEL,
1680 &hwep->qh.dma);
1681 if (hwep->qh.ptr == NULL)
1682 retval = -ENOMEM;
1683
1684 /*
1685 * set up shorthands for ep0 out and in endpoints,
1686 * don't add to gadget's ep_list
1687 */
1688 if (i == 0) {
1689 if (j == RX)
1690 ci->ep0out = hwep;
1691 else
1692 ci->ep0in = hwep;
1693
1694 usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
1695 continue;
1696 }
1697
1698 list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list);
1699 }
1700
1701 return retval;
1702 }
1703
1704 static void destroy_eps(struct ci_hdrc *ci)
1705 {
1706 int i;
1707
1708 for (i = 0; i < ci->hw_ep_max; i++) {
1709 struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
1710
1711 if (hwep->pending_td)
1712 free_pending_td(hwep);
1713 dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
1714 }
1715 }
1716
1717 /**
1718 * ci_udc_start: register a gadget driver
1719 * @gadget: our gadget
1720 * @driver: the driver being registered
1721 *
1722 * Interrupts are enabled here.
1723 */
1724 static int ci_udc_start(struct usb_gadget *gadget,
1725 struct usb_gadget_driver *driver)
1726 {
1727 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1728 int retval = -ENOMEM;
1729
1730 if (driver->disconnect == NULL)
1731 return -EINVAL;
1732
1733
1734 ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
1735 retval = usb_ep_enable(&ci->ep0out->ep);
1736 if (retval)
1737 return retval;
1738
1739 ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
1740 retval = usb_ep_enable(&ci->ep0in->ep);
1741 if (retval)
1742 return retval;
1743
1744 ci->driver = driver;
1745
1746 /* Start otg fsm for B-device */
1747 if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) {
1748 ci_hdrc_otg_fsm_start(ci);
1749 return retval;
1750 }
1751
1752 pm_runtime_get_sync(&ci->gadget.dev);
1753 if (ci->vbus_active) {
1754 hw_device_reset(ci);
1755 } else {
1756 usb_udc_vbus_handler(&ci->gadget, false);
1757 pm_runtime_put_sync(&ci->gadget.dev);
1758 return retval;
1759 }
1760
1761 retval = hw_device_state(ci, ci->ep0out->qh.dma);
1762 if (retval)
1763 pm_runtime_put_sync(&ci->gadget.dev);
1764
1765 return retval;
1766 }
1767
1768 static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci)
1769 {
1770 if (!ci_otg_is_fsm_mode(ci))
1771 return;
1772
1773 mutex_lock(&ci->fsm.lock);
1774 if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) {
1775 ci->fsm.a_bidl_adis_tmout = 1;
1776 ci_hdrc_otg_fsm_start(ci);
1777 } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) {
1778 ci->fsm.protocol = PROTO_UNDEF;
1779 ci->fsm.otg->state = OTG_STATE_UNDEFINED;
1780 }
1781 mutex_unlock(&ci->fsm.lock);
1782 }
1783
1784 /**
1785 * ci_udc_stop: unregister a gadget driver
1786 */
1787 static int ci_udc_stop(struct usb_gadget *gadget)
1788 {
1789 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1790 unsigned long flags;
1791
1792 spin_lock_irqsave(&ci->lock, flags);
1793
1794 if (ci->vbus_active) {
1795 hw_device_state(ci, 0);
1796 spin_unlock_irqrestore(&ci->lock, flags);
1797 if (ci->platdata->notify_event)
1798 ci->platdata->notify_event(ci,
1799 CI_HDRC_CONTROLLER_STOPPED_EVENT);
1800 _gadget_stop_activity(&ci->gadget);
1801 spin_lock_irqsave(&ci->lock, flags);
1802 pm_runtime_put(&ci->gadget.dev);
1803 }
1804
1805 ci->driver = NULL;
1806 spin_unlock_irqrestore(&ci->lock, flags);
1807
1808 ci_udc_stop_for_otg_fsm(ci);
1809 return 0;
1810 }
1811
1812 /******************************************************************************
1813 * BUS block
1814 *****************************************************************************/
1815 /**
1816 * udc_irq: ci interrupt handler
1817 *
1818 * This function returns IRQ_HANDLED if the IRQ has been handled
1819 * It locks access to registers
1820 */
1821 static irqreturn_t udc_irq(struct ci_hdrc *ci)
1822 {
1823 irqreturn_t retval;
1824 u32 intr;
1825
1826 if (ci == NULL)
1827 return IRQ_HANDLED;
1828
1829 spin_lock(&ci->lock);
1830
1831 if (ci->platdata->flags & CI_HDRC_REGS_SHARED) {
1832 if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
1833 USBMODE_CM_DC) {
1834 spin_unlock(&ci->lock);
1835 return IRQ_NONE;
1836 }
1837 }
1838 intr = hw_test_and_clear_intr_active(ci);
1839
1840 if (intr) {
1841 /* order defines priority - do NOT change it */
1842 if (USBi_URI & intr)
1843 isr_reset_handler(ci);
1844
1845 if (USBi_PCI & intr) {
1846 ci->gadget.speed = hw_port_is_high_speed(ci) ?
1847 USB_SPEED_HIGH : USB_SPEED_FULL;
1848 if (ci->suspended) {
1849 if (ci->driver->resume) {
1850 spin_unlock(&ci->lock);
1851 ci->driver->resume(&ci->gadget);
1852 spin_lock(&ci->lock);
1853 }
1854 ci->suspended = 0;
1855 usb_gadget_set_state(&ci->gadget,
1856 ci->resume_state);
1857 }
1858 }
1859
1860 if (USBi_UI & intr)
1861 isr_tr_complete_handler(ci);
1862
1863 if ((USBi_SLI & intr) && !(ci->suspended)) {
1864 ci->suspended = 1;
1865 ci->resume_state = ci->gadget.state;
1866 if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
1867 ci->driver->suspend) {
1868 spin_unlock(&ci->lock);
1869 ci->driver->suspend(&ci->gadget);
1870 spin_lock(&ci->lock);
1871 }
1872 usb_gadget_set_state(&ci->gadget,
1873 USB_STATE_SUSPENDED);
1874 }
1875 retval = IRQ_HANDLED;
1876 } else {
1877 retval = IRQ_NONE;
1878 }
1879 spin_unlock(&ci->lock);
1880
1881 return retval;
1882 }
1883
1884 /**
1885 * udc_start: initialize gadget role
1886 * @ci: chipidea controller
1887 */
1888 static int udc_start(struct ci_hdrc *ci)
1889 {
1890 struct device *dev = ci->dev;
1891 struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
1892 int retval = 0;
1893
1894 ci->gadget.ops = &usb_gadget_ops;
1895 ci->gadget.speed = USB_SPEED_UNKNOWN;
1896 ci->gadget.max_speed = USB_SPEED_HIGH;
1897 ci->gadget.name = ci->platdata->name;
1898 ci->gadget.otg_caps = otg_caps;
1899
1900 if (ci->platdata->flags & CI_HDRC_REQUIRES_ALIGNED_DMA)
1901 ci->gadget.quirk_avoids_skb_reserve = 1;
1902
1903 if (ci->is_otg && (otg_caps->hnp_support || otg_caps->srp_support ||
1904 otg_caps->adp_support))
1905 ci->gadget.is_otg = 1;
1906
1907 INIT_LIST_HEAD(&ci->gadget.ep_list);
1908
1909 /* alloc resources */
1910 ci->qh_pool = dma_pool_create("ci_hw_qh", dev->parent,
1911 sizeof(struct ci_hw_qh),
1912 64, CI_HDRC_PAGE_SIZE);
1913 if (ci->qh_pool == NULL)
1914 return -ENOMEM;
1915
1916 ci->td_pool = dma_pool_create("ci_hw_td", dev->parent,
1917 sizeof(struct ci_hw_td),
1918 64, CI_HDRC_PAGE_SIZE);
1919 if (ci->td_pool == NULL) {
1920 retval = -ENOMEM;
1921 goto free_qh_pool;
1922 }
1923
1924 retval = init_eps(ci);
1925 if (retval)
1926 goto free_pools;
1927
1928 ci->gadget.ep0 = &ci->ep0in->ep;
1929
1930 retval = usb_add_gadget_udc(dev, &ci->gadget);
1931 if (retval)
1932 goto destroy_eps;
1933
1934 pm_runtime_no_callbacks(&ci->gadget.dev);
1935 pm_runtime_enable(&ci->gadget.dev);
1936
1937 return retval;
1938
1939 destroy_eps:
1940 destroy_eps(ci);
1941 free_pools:
1942 dma_pool_destroy(ci->td_pool);
1943 free_qh_pool:
1944 dma_pool_destroy(ci->qh_pool);
1945 return retval;
1946 }
1947
1948 /**
1949 * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
1950 *
1951 * No interrupts active, the IRQ has been released
1952 */
1953 void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
1954 {
1955 if (!ci->roles[CI_ROLE_GADGET])
1956 return;
1957
1958 usb_del_gadget_udc(&ci->gadget);
1959
1960 destroy_eps(ci);
1961
1962 dma_pool_destroy(ci->td_pool);
1963 dma_pool_destroy(ci->qh_pool);
1964 }
1965
1966 static int udc_id_switch_for_device(struct ci_hdrc *ci)
1967 {
1968 if (ci->is_otg)
1969 /* Clear and enable BSV irq */
1970 hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
1971 OTGSC_BSVIS | OTGSC_BSVIE);
1972
1973 return 0;
1974 }
1975
1976 static void udc_id_switch_for_host(struct ci_hdrc *ci)
1977 {
1978 /*
1979 * host doesn't care B_SESSION_VALID event
1980 * so clear and disbale BSV irq
1981 */
1982 if (ci->is_otg)
1983 hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
1984
1985 ci->vbus_active = 0;
1986 }
1987
1988 /**
1989 * ci_hdrc_gadget_init - initialize device related bits
1990 * ci: the controller
1991 *
1992 * This function initializes the gadget, if the device is "device capable".
1993 */
1994 int ci_hdrc_gadget_init(struct ci_hdrc *ci)
1995 {
1996 struct ci_role_driver *rdrv;
1997 int ret;
1998
1999 if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
2000 return -ENXIO;
2001
2002 rdrv = devm_kzalloc(ci->dev, sizeof(*rdrv), GFP_KERNEL);
2003 if (!rdrv)
2004 return -ENOMEM;
2005
2006 rdrv->start = udc_id_switch_for_device;
2007 rdrv->stop = udc_id_switch_for_host;
2008 rdrv->irq = udc_irq;
2009 rdrv->name = "gadget";
2010
2011 ret = udc_start(ci);
2012 if (!ret)
2013 ci->roles[CI_ROLE_GADGET] = rdrv;
2014
2015 return ret;
2016 }
Linux with added FPC-III support