Linux 4.16.11
[linux/fpc-iii.git] / drivers / usb / host / ehci-pmcmsp.c
blob46e160370d6e450c8368971516b6c61d58e958bc
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * PMC MSP EHCI (Host Controller Driver) for USB.
5 * (C) Copyright 2006-2010 PMC-Sierra Inc
6 */
8 /* includes */
9 #include <linux/platform_device.h>
10 #include <linux/gpio.h>
11 #include <linux/usb.h>
12 #include <msp_usb.h>
14 /* stream disable*/
15 #define USB_CTRL_MODE_STREAM_DISABLE 0x10
17 /* threshold */
18 #define USB_CTRL_FIFO_THRESH 0x00300000
20 /* register offset for usb_mode */
21 #define USB_EHCI_REG_USB_MODE 0x68
23 /* register offset for usb fifo */
24 #define USB_EHCI_REG_USB_FIFO 0x24
26 /* register offset for usb status */
27 #define USB_EHCI_REG_USB_STATUS 0x44
29 /* serial/parallel transceiver */
30 #define USB_EHCI_REG_BIT_STAT_STS (1<<29)
32 /* TWI USB0 host device pin */
33 #define MSP_PIN_USB0_HOST_DEV 49
35 /* TWI USB1 host device pin */
36 #define MSP_PIN_USB1_HOST_DEV 50
39 static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
41 u8 *base;
42 u8 *statreg;
43 u8 *fiforeg;
44 u32 val;
45 struct ehci_regs *reg_base = ehci->regs;
47 /* get register base */
48 base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE;
49 statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS;
50 fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO;
52 /* Disable controller mode stream */
53 val = ehci_readl(ehci, (u32 *)base);
54 ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE),
55 (u32 *)base);
57 /* clear STS to select parallel transceiver interface */
58 val = ehci_readl(ehci, (u32 *)statreg);
59 val = val & ~USB_EHCI_REG_BIT_STAT_STS;
60 ehci_writel(ehci, val, (u32 *)statreg);
62 /* write to set the proper fifo threshold */
63 ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg);
65 /* set TWI GPIO USB_HOST_DEV pin high */
66 gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
69 /* called during probe() after chip reset completes */
70 static int ehci_msp_setup(struct usb_hcd *hcd)
72 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
73 int retval;
75 ehci->big_endian_mmio = 1;
76 ehci->big_endian_desc = 1;
78 ehci->caps = hcd->regs;
79 hcd->has_tt = 1;
81 retval = ehci_setup(hcd);
82 if (retval)
83 return retval;
85 usb_hcd_tdi_set_mode(ehci);
87 return retval;
91 /* configure so an HC device and id are always provided
92 * always called with process context; sleeping is OK
95 static int usb_hcd_msp_map_regs(struct mspusb_device *dev)
97 struct resource *res;
98 struct platform_device *pdev = &dev->dev;
99 u32 res_len;
100 int retval;
102 /* MAB register space */
103 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
104 if (res == NULL)
105 return -ENOMEM;
106 res_len = resource_size(res);
107 if (!request_mem_region(res->start, res_len, "mab regs"))
108 return -EBUSY;
110 dev->mab_regs = ioremap_nocache(res->start, res_len);
111 if (dev->mab_regs == NULL) {
112 retval = -ENOMEM;
113 goto err1;
116 /* MSP USB register space */
117 res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
118 if (res == NULL) {
119 retval = -ENOMEM;
120 goto err2;
122 res_len = resource_size(res);
123 if (!request_mem_region(res->start, res_len, "usbid regs")) {
124 retval = -EBUSY;
125 goto err2;
127 dev->usbid_regs = ioremap_nocache(res->start, res_len);
128 if (dev->usbid_regs == NULL) {
129 retval = -ENOMEM;
130 goto err3;
133 return 0;
134 err3:
135 res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
136 res_len = resource_size(res);
137 release_mem_region(res->start, res_len);
138 err2:
139 iounmap(dev->mab_regs);
140 err1:
141 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
142 res_len = resource_size(res);
143 release_mem_region(res->start, res_len);
144 dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n");
145 return retval;
149 * usb_hcd_msp_probe - initialize PMC MSP-based HCDs
150 * Context: !in_interrupt()
152 * Allocates basic resources for this USB host controller, and
153 * then invokes the start() method for the HCD associated with it
154 * through the hotplug entry's driver_data.
157 int usb_hcd_msp_probe(const struct hc_driver *driver,
158 struct platform_device *dev)
160 int retval;
161 struct usb_hcd *hcd;
162 struct resource *res;
163 struct ehci_hcd *ehci ;
165 hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp");
166 if (!hcd)
167 return -ENOMEM;
169 res = platform_get_resource(dev, IORESOURCE_MEM, 0);
170 if (res == NULL) {
171 pr_debug("No IOMEM resource info for %s.\n", dev->name);
172 retval = -ENOMEM;
173 goto err1;
175 hcd->rsrc_start = res->start;
176 hcd->rsrc_len = resource_size(res);
177 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) {
178 retval = -EBUSY;
179 goto err1;
181 hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
182 if (!hcd->regs) {
183 pr_debug("ioremap failed");
184 retval = -ENOMEM;
185 goto err2;
188 res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
189 if (res == NULL) {
190 dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name);
191 retval = -ENOMEM;
192 goto err3;
195 /* Map non-EHCI register spaces */
196 retval = usb_hcd_msp_map_regs(to_mspusb_device(dev));
197 if (retval != 0)
198 goto err3;
200 ehci = hcd_to_ehci(hcd);
201 ehci->big_endian_mmio = 1;
202 ehci->big_endian_desc = 1;
205 retval = usb_add_hcd(hcd, res->start, IRQF_SHARED);
206 if (retval == 0) {
207 device_wakeup_enable(hcd->self.controller);
208 return 0;
211 usb_remove_hcd(hcd);
212 err3:
213 iounmap(hcd->regs);
214 err2:
215 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
216 err1:
217 usb_put_hcd(hcd);
219 return retval;
225 * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs
226 * @dev: USB Host Controller being removed
227 * Context: !in_interrupt()
229 * Reverses the effect of usb_hcd_msp_probe(), first invoking
230 * the HCD's stop() method. It is always called from a thread
231 * context, normally "rmmod", "apmd", or something similar.
233 * may be called without controller electrically present
234 * may be called with controller, bus, and devices active
236 void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev)
238 usb_remove_hcd(hcd);
239 iounmap(hcd->regs);
240 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
241 usb_put_hcd(hcd);
244 static const struct hc_driver ehci_msp_hc_driver = {
245 .description = hcd_name,
246 .product_desc = "PMC MSP EHCI",
247 .hcd_priv_size = sizeof(struct ehci_hcd),
250 * generic hardware linkage
252 .irq = ehci_irq,
253 .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
256 * basic lifecycle operations
258 .reset = ehci_msp_setup,
259 .shutdown = ehci_shutdown,
260 .start = ehci_run,
261 .stop = ehci_stop,
264 * managing i/o requests and associated device resources
266 .urb_enqueue = ehci_urb_enqueue,
267 .urb_dequeue = ehci_urb_dequeue,
268 .endpoint_disable = ehci_endpoint_disable,
269 .endpoint_reset = ehci_endpoint_reset,
272 * scheduling support
274 .get_frame_number = ehci_get_frame,
277 * root hub support
279 .hub_status_data = ehci_hub_status_data,
280 .hub_control = ehci_hub_control,
281 .bus_suspend = ehci_bus_suspend,
282 .bus_resume = ehci_bus_resume,
283 .relinquish_port = ehci_relinquish_port,
284 .port_handed_over = ehci_port_handed_over,
286 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
289 static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
291 int ret;
293 pr_debug("In ehci_hcd_msp_drv_probe");
295 if (usb_disabled())
296 return -ENODEV;
298 gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");
300 ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);
302 return ret;
305 static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
307 struct usb_hcd *hcd = platform_get_drvdata(pdev);
309 usb_hcd_msp_remove(hcd, pdev);
311 /* free TWI GPIO USB_HOST_DEV pin */
312 gpio_free(MSP_PIN_USB0_HOST_DEV);
314 return 0;
317 MODULE_ALIAS("pmcmsp-ehci");
319 static struct platform_driver ehci_hcd_msp_driver = {
320 .probe = ehci_hcd_msp_drv_probe,
321 .remove = ehci_hcd_msp_drv_remove,
322 .driver = {
323 .name = "pmcmsp-ehci",