Linux 4.16.11
[linux/fpc-iii.git] / drivers / usb / misc / usb4604.c
blob1b4de651e697635e3a4e1d60f1168ff8ee8e99f1
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Driver for SMSC USB4604 USB HSIC 4-port 2.0 hub controller driver
4 * Based on usb3503 driver
6 * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
7 * Copyright (c) 2016 Linaro Ltd.
8 */
10 #include <linux/i2c.h>
11 #include <linux/delay.h>
12 #include <linux/slab.h>
13 #include <linux/module.h>
14 #include <linux/gpio/consumer.h>
16 enum usb4604_mode {
17 USB4604_MODE_UNKNOWN,
18 USB4604_MODE_HUB,
19 USB4604_MODE_STANDBY,
22 struct usb4604 {
23 enum usb4604_mode mode;
24 struct device *dev;
25 struct gpio_desc *gpio_reset;
28 static void usb4604_reset(struct usb4604 *hub, int state)
30 gpiod_set_value_cansleep(hub->gpio_reset, state);
32 /* Wait for i2c logic to come up */
33 if (state)
34 msleep(250);
37 static int usb4604_connect(struct usb4604 *hub)
39 struct device *dev = hub->dev;
40 struct i2c_client *client = to_i2c_client(dev);
41 int err;
42 u8 connect_cmd[] = { 0xaa, 0x55, 0x00 };
44 usb4604_reset(hub, 1);
46 err = i2c_master_send(client, connect_cmd, ARRAY_SIZE(connect_cmd));
47 if (err < 0) {
48 usb4604_reset(hub, 0);
49 return err;
52 hub->mode = USB4604_MODE_HUB;
53 dev_dbg(dev, "switched to HUB mode\n");
55 return 0;
58 static int usb4604_switch_mode(struct usb4604 *hub, enum usb4604_mode mode)
60 struct device *dev = hub->dev;
61 int err = 0;
63 switch (mode) {
64 case USB4604_MODE_HUB:
65 err = usb4604_connect(hub);
66 break;
68 case USB4604_MODE_STANDBY:
69 usb4604_reset(hub, 0);
70 dev_dbg(dev, "switched to STANDBY mode\n");
71 break;
73 default:
74 dev_err(dev, "unknown mode is requested\n");
75 err = -EINVAL;
76 break;
79 return err;
82 static int usb4604_probe(struct usb4604 *hub)
84 struct device *dev = hub->dev;
85 struct device_node *np = dev->of_node;
86 struct gpio_desc *gpio;
87 u32 mode = USB4604_MODE_HUB;
89 gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
90 if (IS_ERR(gpio))
91 return PTR_ERR(gpio);
92 hub->gpio_reset = gpio;
94 if (of_property_read_u32(np, "initial-mode", &hub->mode))
95 hub->mode = mode;
97 return usb4604_switch_mode(hub, hub->mode);
100 static int usb4604_i2c_probe(struct i2c_client *i2c,
101 const struct i2c_device_id *id)
103 struct usb4604 *hub;
105 hub = devm_kzalloc(&i2c->dev, sizeof(*hub), GFP_KERNEL);
106 if (!hub)
107 return -ENOMEM;
109 i2c_set_clientdata(i2c, hub);
110 hub->dev = &i2c->dev;
112 return usb4604_probe(hub);
115 #ifdef CONFIG_PM_SLEEP
116 static int usb4604_i2c_suspend(struct device *dev)
118 struct i2c_client *client = to_i2c_client(dev);
119 struct usb4604 *hub = i2c_get_clientdata(client);
121 usb4604_switch_mode(hub, USB4604_MODE_STANDBY);
123 return 0;
126 static int usb4604_i2c_resume(struct device *dev)
128 struct i2c_client *client = to_i2c_client(dev);
129 struct usb4604 *hub = i2c_get_clientdata(client);
131 usb4604_switch_mode(hub, hub->mode);
133 return 0;
135 #endif
137 static SIMPLE_DEV_PM_OPS(usb4604_i2c_pm_ops, usb4604_i2c_suspend,
138 usb4604_i2c_resume);
140 static const struct i2c_device_id usb4604_id[] = {
141 { "usb4604", 0 },
144 MODULE_DEVICE_TABLE(i2c, usb4604_id);
146 #ifdef CONFIG_OF
147 static const struct of_device_id usb4604_of_match[] = {
148 { .compatible = "smsc,usb4604" },
151 MODULE_DEVICE_TABLE(of, usb4604_of_match);
152 #endif
154 static struct i2c_driver usb4604_i2c_driver = {
155 .driver = {
156 .name = "usb4604",
157 .pm = &usb4604_i2c_pm_ops,
158 .of_match_table = of_match_ptr(usb4604_of_match),
160 .probe = usb4604_i2c_probe,
161 .id_table = usb4604_id,
163 module_i2c_driver(usb4604_i2c_driver);
165 MODULE_DESCRIPTION("USB4604 USB HUB driver");
166 MODULE_LICENSE("GPL v2");