2 * raid1.c : Multiple Devices driver for Linux
4 * Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat
6 * Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman
8 * RAID-1 management functions.
10 * Better read-balancing code written by Mika Kuoppala <miku@iki.fi>, 2000
12 * Fixes to reconstruction by Jakob Østergaard" <jakob@ostenfeld.dk>
13 * Various fixes by Neil Brown <neilb@cse.unsw.edu.au>
15 * Changes by Peter T. Breuer <ptb@it.uc3m.es> 31/1/2003 to support
16 * bitmapped intelligence in resync:
18 * - bitmap marked during normal i/o
19 * - bitmap used to skip nondirty blocks during sync
21 * Additions to bitmap code, (C) 2003-2004 Paul Clements, SteelEye Technology:
22 * - persistent bitmap code
24 * This program is free software; you can redistribute it and/or modify
25 * it under the terms of the GNU General Public License as published by
26 * the Free Software Foundation; either version 2, or (at your option)
29 * You should have received a copy of the GNU General Public License
30 * (for example /usr/src/linux/COPYING); if not, write to the Free
31 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
34 #include <linux/delay.h>
35 #include <linux/blkdev.h>
36 #include <linux/seq_file.h>
43 #define PRINTK(x...) printk(x)
49 * Number of guaranteed r1bios in case of extreme VM load:
51 #define NR_RAID1_BIOS 256
54 static void unplug_slaves(mddev_t
*mddev
);
56 static void allow_barrier(conf_t
*conf
);
57 static void lower_barrier(conf_t
*conf
);
59 static void * r1bio_pool_alloc(gfp_t gfp_flags
, void *data
)
61 struct pool_info
*pi
= data
;
63 int size
= offsetof(r1bio_t
, bios
[pi
->raid_disks
]);
65 /* allocate a r1bio with room for raid_disks entries in the bios array */
66 r1_bio
= kzalloc(size
, gfp_flags
);
68 unplug_slaves(pi
->mddev
);
73 static void r1bio_pool_free(void *r1_bio
, void *data
)
78 #define RESYNC_BLOCK_SIZE (64*1024)
79 //#define RESYNC_BLOCK_SIZE PAGE_SIZE
80 #define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
81 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
82 #define RESYNC_WINDOW (2048*1024)
84 static void * r1buf_pool_alloc(gfp_t gfp_flags
, void *data
)
86 struct pool_info
*pi
= data
;
92 r1_bio
= r1bio_pool_alloc(gfp_flags
, pi
);
94 unplug_slaves(pi
->mddev
);
99 * Allocate bios : 1 for reading, n-1 for writing
101 for (j
= pi
->raid_disks
; j
-- ; ) {
102 bio
= bio_alloc(gfp_flags
, RESYNC_PAGES
);
105 r1_bio
->bios
[j
] = bio
;
108 * Allocate RESYNC_PAGES data pages and attach them to
110 * If this is a user-requested check/repair, allocate
111 * RESYNC_PAGES for each bio.
113 if (test_bit(MD_RECOVERY_REQUESTED
, &pi
->mddev
->recovery
))
118 bio
= r1_bio
->bios
[j
];
119 for (i
= 0; i
< RESYNC_PAGES
; i
++) {
120 page
= alloc_page(gfp_flags
);
124 bio
->bi_io_vec
[i
].bv_page
= page
;
128 /* If not user-requests, copy the page pointers to all bios */
129 if (!test_bit(MD_RECOVERY_REQUESTED
, &pi
->mddev
->recovery
)) {
130 for (i
=0; i
<RESYNC_PAGES
; i
++)
131 for (j
=1; j
<pi
->raid_disks
; j
++)
132 r1_bio
->bios
[j
]->bi_io_vec
[i
].bv_page
=
133 r1_bio
->bios
[0]->bi_io_vec
[i
].bv_page
;
136 r1_bio
->master_bio
= NULL
;
141 for (j
=0 ; j
< pi
->raid_disks
; j
++)
142 for (i
=0; i
< r1_bio
->bios
[j
]->bi_vcnt
; i
++)
143 put_page(r1_bio
->bios
[j
]->bi_io_vec
[i
].bv_page
);
146 while ( ++j
< pi
->raid_disks
)
147 bio_put(r1_bio
->bios
[j
]);
148 r1bio_pool_free(r1_bio
, data
);
152 static void r1buf_pool_free(void *__r1_bio
, void *data
)
154 struct pool_info
*pi
= data
;
156 r1bio_t
*r1bio
= __r1_bio
;
158 for (i
= 0; i
< RESYNC_PAGES
; i
++)
159 for (j
= pi
->raid_disks
; j
-- ;) {
161 r1bio
->bios
[j
]->bi_io_vec
[i
].bv_page
!=
162 r1bio
->bios
[0]->bi_io_vec
[i
].bv_page
)
163 safe_put_page(r1bio
->bios
[j
]->bi_io_vec
[i
].bv_page
);
165 for (i
=0 ; i
< pi
->raid_disks
; i
++)
166 bio_put(r1bio
->bios
[i
]);
168 r1bio_pool_free(r1bio
, data
);
171 static void put_all_bios(conf_t
*conf
, r1bio_t
*r1_bio
)
175 for (i
= 0; i
< conf
->raid_disks
; i
++) {
176 struct bio
**bio
= r1_bio
->bios
+ i
;
177 if (*bio
&& *bio
!= IO_BLOCKED
)
183 static void free_r1bio(r1bio_t
*r1_bio
)
185 conf_t
*conf
= r1_bio
->mddev
->private;
188 * Wake up any possible resync thread that waits for the device
193 put_all_bios(conf
, r1_bio
);
194 mempool_free(r1_bio
, conf
->r1bio_pool
);
197 static void put_buf(r1bio_t
*r1_bio
)
199 conf_t
*conf
= r1_bio
->mddev
->private;
202 for (i
=0; i
<conf
->raid_disks
; i
++) {
203 struct bio
*bio
= r1_bio
->bios
[i
];
205 rdev_dec_pending(conf
->mirrors
[i
].rdev
, r1_bio
->mddev
);
208 mempool_free(r1_bio
, conf
->r1buf_pool
);
213 static void reschedule_retry(r1bio_t
*r1_bio
)
216 mddev_t
*mddev
= r1_bio
->mddev
;
217 conf_t
*conf
= mddev
->private;
219 spin_lock_irqsave(&conf
->device_lock
, flags
);
220 list_add(&r1_bio
->retry_list
, &conf
->retry_list
);
222 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
224 wake_up(&conf
->wait_barrier
);
225 md_wakeup_thread(mddev
->thread
);
229 * raid_end_bio_io() is called when we have finished servicing a mirrored
230 * operation and are ready to return a success/failure code to the buffer
233 static void raid_end_bio_io(r1bio_t
*r1_bio
)
235 struct bio
*bio
= r1_bio
->master_bio
;
237 /* if nobody has done the final endio yet, do it now */
238 if (!test_and_set_bit(R1BIO_Returned
, &r1_bio
->state
)) {
239 PRINTK(KERN_DEBUG
"raid1: sync end %s on sectors %llu-%llu\n",
240 (bio_data_dir(bio
) == WRITE
) ? "write" : "read",
241 (unsigned long long) bio
->bi_sector
,
242 (unsigned long long) bio
->bi_sector
+
243 (bio
->bi_size
>> 9) - 1);
246 test_bit(R1BIO_Uptodate
, &r1_bio
->state
) ? 0 : -EIO
);
252 * Update disk head position estimator based on IRQ completion info.
254 static inline void update_head_pos(int disk
, r1bio_t
*r1_bio
)
256 conf_t
*conf
= r1_bio
->mddev
->private;
258 conf
->mirrors
[disk
].head_position
=
259 r1_bio
->sector
+ (r1_bio
->sectors
);
262 static void raid1_end_read_request(struct bio
*bio
, int error
)
264 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
265 r1bio_t
* r1_bio
= (r1bio_t
*)(bio
->bi_private
);
267 conf_t
*conf
= r1_bio
->mddev
->private;
269 mirror
= r1_bio
->read_disk
;
271 * this branch is our 'one mirror IO has finished' event handler:
273 update_head_pos(mirror
, r1_bio
);
276 set_bit(R1BIO_Uptodate
, &r1_bio
->state
);
278 /* If all other devices have failed, we want to return
279 * the error upwards rather than fail the last device.
280 * Here we redefine "uptodate" to mean "Don't want to retry"
283 spin_lock_irqsave(&conf
->device_lock
, flags
);
284 if (r1_bio
->mddev
->degraded
== conf
->raid_disks
||
285 (r1_bio
->mddev
->degraded
== conf
->raid_disks
-1 &&
286 !test_bit(Faulty
, &conf
->mirrors
[mirror
].rdev
->flags
)))
288 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
292 raid_end_bio_io(r1_bio
);
297 char b
[BDEVNAME_SIZE
];
298 if (printk_ratelimit())
299 printk(KERN_ERR
"raid1: %s: rescheduling sector %llu\n",
300 bdevname(conf
->mirrors
[mirror
].rdev
->bdev
,b
), (unsigned long long)r1_bio
->sector
);
301 reschedule_retry(r1_bio
);
304 rdev_dec_pending(conf
->mirrors
[mirror
].rdev
, conf
->mddev
);
307 static void raid1_end_write_request(struct bio
*bio
, int error
)
309 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
310 r1bio_t
* r1_bio
= (r1bio_t
*)(bio
->bi_private
);
311 int mirror
, behind
= test_bit(R1BIO_BehindIO
, &r1_bio
->state
);
312 conf_t
*conf
= r1_bio
->mddev
->private;
313 struct bio
*to_put
= NULL
;
316 for (mirror
= 0; mirror
< conf
->raid_disks
; mirror
++)
317 if (r1_bio
->bios
[mirror
] == bio
)
320 if (error
== -EOPNOTSUPP
&& test_bit(R1BIO_Barrier
, &r1_bio
->state
)) {
321 set_bit(BarriersNotsupp
, &conf
->mirrors
[mirror
].rdev
->flags
);
322 set_bit(R1BIO_BarrierRetry
, &r1_bio
->state
);
323 r1_bio
->mddev
->barriers_work
= 0;
324 /* Don't rdev_dec_pending in this branch - keep it for the retry */
327 * this branch is our 'one mirror IO has finished' event handler:
329 r1_bio
->bios
[mirror
] = NULL
;
332 md_error(r1_bio
->mddev
, conf
->mirrors
[mirror
].rdev
);
333 /* an I/O failed, we can't clear the bitmap */
334 set_bit(R1BIO_Degraded
, &r1_bio
->state
);
337 * Set R1BIO_Uptodate in our master bio, so that
338 * we will return a good error code for to the higher
339 * levels even if IO on some other mirrored buffer fails.
341 * The 'master' represents the composite IO operation to
342 * user-side. So if something waits for IO, then it will
343 * wait for the 'master' bio.
345 set_bit(R1BIO_Uptodate
, &r1_bio
->state
);
347 update_head_pos(mirror
, r1_bio
);
350 if (test_bit(WriteMostly
, &conf
->mirrors
[mirror
].rdev
->flags
))
351 atomic_dec(&r1_bio
->behind_remaining
);
353 /* In behind mode, we ACK the master bio once the I/O has safely
354 * reached all non-writemostly disks. Setting the Returned bit
355 * ensures that this gets done only once -- we don't ever want to
356 * return -EIO here, instead we'll wait */
358 if (atomic_read(&r1_bio
->behind_remaining
) >= (atomic_read(&r1_bio
->remaining
)-1) &&
359 test_bit(R1BIO_Uptodate
, &r1_bio
->state
)) {
360 /* Maybe we can return now */
361 if (!test_and_set_bit(R1BIO_Returned
, &r1_bio
->state
)) {
362 struct bio
*mbio
= r1_bio
->master_bio
;
363 PRINTK(KERN_DEBUG
"raid1: behind end write sectors %llu-%llu\n",
364 (unsigned long long) mbio
->bi_sector
,
365 (unsigned long long) mbio
->bi_sector
+
366 (mbio
->bi_size
>> 9) - 1);
371 rdev_dec_pending(conf
->mirrors
[mirror
].rdev
, conf
->mddev
);
375 * Let's see if all mirrored write operations have finished
378 if (atomic_dec_and_test(&r1_bio
->remaining
)) {
379 if (test_bit(R1BIO_BarrierRetry
, &r1_bio
->state
))
380 reschedule_retry(r1_bio
);
382 /* it really is the end of this request */
383 if (test_bit(R1BIO_BehindIO
, &r1_bio
->state
)) {
384 /* free extra copy of the data pages */
385 int i
= bio
->bi_vcnt
;
387 safe_put_page(bio
->bi_io_vec
[i
].bv_page
);
389 /* clear the bitmap if all writes complete successfully */
390 bitmap_endwrite(r1_bio
->mddev
->bitmap
, r1_bio
->sector
,
392 !test_bit(R1BIO_Degraded
, &r1_bio
->state
),
394 md_write_end(r1_bio
->mddev
);
395 raid_end_bio_io(r1_bio
);
405 * This routine returns the disk from which the requested read should
406 * be done. There is a per-array 'next expected sequential IO' sector
407 * number - if this matches on the next IO then we use the last disk.
408 * There is also a per-disk 'last know head position' sector that is
409 * maintained from IRQ contexts, both the normal and the resync IO
410 * completion handlers update this position correctly. If there is no
411 * perfect sequential match then we pick the disk whose head is closest.
413 * If there are 2 mirrors in the same 2 devices, performance degrades
414 * because position is mirror, not device based.
416 * The rdev for the device selected will have nr_pending incremented.
418 static int read_balance(conf_t
*conf
, r1bio_t
*r1_bio
)
420 const unsigned long this_sector
= r1_bio
->sector
;
421 int new_disk
= conf
->last_used
, disk
= new_disk
;
423 const int sectors
= r1_bio
->sectors
;
424 sector_t new_distance
, current_distance
;
429 * Check if we can balance. We can balance on the whole
430 * device if no resync is going on, or below the resync window.
431 * We take the first readable disk when above the resync window.
434 if (conf
->mddev
->recovery_cp
< MaxSector
&&
435 (this_sector
+ sectors
>= conf
->next_resync
)) {
436 /* Choose the first operation device, for consistancy */
439 for (rdev
= rcu_dereference(conf
->mirrors
[new_disk
].rdev
);
440 r1_bio
->bios
[new_disk
] == IO_BLOCKED
||
441 !rdev
|| !test_bit(In_sync
, &rdev
->flags
)
442 || test_bit(WriteMostly
, &rdev
->flags
);
443 rdev
= rcu_dereference(conf
->mirrors
[++new_disk
].rdev
)) {
445 if (rdev
&& test_bit(In_sync
, &rdev
->flags
) &&
446 r1_bio
->bios
[new_disk
] != IO_BLOCKED
)
447 wonly_disk
= new_disk
;
449 if (new_disk
== conf
->raid_disks
- 1) {
450 new_disk
= wonly_disk
;
458 /* make sure the disk is operational */
459 for (rdev
= rcu_dereference(conf
->mirrors
[new_disk
].rdev
);
460 r1_bio
->bios
[new_disk
] == IO_BLOCKED
||
461 !rdev
|| !test_bit(In_sync
, &rdev
->flags
) ||
462 test_bit(WriteMostly
, &rdev
->flags
);
463 rdev
= rcu_dereference(conf
->mirrors
[new_disk
].rdev
)) {
465 if (rdev
&& test_bit(In_sync
, &rdev
->flags
) &&
466 r1_bio
->bios
[new_disk
] != IO_BLOCKED
)
467 wonly_disk
= new_disk
;
470 new_disk
= conf
->raid_disks
;
472 if (new_disk
== disk
) {
473 new_disk
= wonly_disk
;
482 /* now disk == new_disk == starting point for search */
485 * Don't change to another disk for sequential reads:
487 if (conf
->next_seq_sect
== this_sector
)
489 if (this_sector
== conf
->mirrors
[new_disk
].head_position
)
492 current_distance
= abs(this_sector
- conf
->mirrors
[disk
].head_position
);
494 /* Find the disk whose head is closest */
498 disk
= conf
->raid_disks
;
501 rdev
= rcu_dereference(conf
->mirrors
[disk
].rdev
);
503 if (!rdev
|| r1_bio
->bios
[disk
] == IO_BLOCKED
||
504 !test_bit(In_sync
, &rdev
->flags
) ||
505 test_bit(WriteMostly
, &rdev
->flags
))
508 if (!atomic_read(&rdev
->nr_pending
)) {
512 new_distance
= abs(this_sector
- conf
->mirrors
[disk
].head_position
);
513 if (new_distance
< current_distance
) {
514 current_distance
= new_distance
;
517 } while (disk
!= conf
->last_used
);
523 rdev
= rcu_dereference(conf
->mirrors
[new_disk
].rdev
);
526 atomic_inc(&rdev
->nr_pending
);
527 if (!test_bit(In_sync
, &rdev
->flags
)) {
528 /* cannot risk returning a device that failed
529 * before we inc'ed nr_pending
531 rdev_dec_pending(rdev
, conf
->mddev
);
534 conf
->next_seq_sect
= this_sector
+ sectors
;
535 conf
->last_used
= new_disk
;
542 static void unplug_slaves(mddev_t
*mddev
)
544 conf_t
*conf
= mddev
->private;
548 for (i
=0; i
<mddev
->raid_disks
; i
++) {
549 mdk_rdev_t
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
550 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
) && atomic_read(&rdev
->nr_pending
)) {
551 struct request_queue
*r_queue
= bdev_get_queue(rdev
->bdev
);
553 atomic_inc(&rdev
->nr_pending
);
558 rdev_dec_pending(rdev
, mddev
);
565 static void raid1_unplug(struct request_queue
*q
)
567 mddev_t
*mddev
= q
->queuedata
;
569 unplug_slaves(mddev
);
570 md_wakeup_thread(mddev
->thread
);
573 static int raid1_congested(void *data
, int bits
)
575 mddev_t
*mddev
= data
;
576 conf_t
*conf
= mddev
->private;
580 for (i
= 0; i
< mddev
->raid_disks
; i
++) {
581 mdk_rdev_t
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
582 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
)) {
583 struct request_queue
*q
= bdev_get_queue(rdev
->bdev
);
585 /* Note the '|| 1' - when read_balance prefers
586 * non-congested targets, it can be removed
588 if ((bits
& (1<<BDI_async_congested
)) || 1)
589 ret
|= bdi_congested(&q
->backing_dev_info
, bits
);
591 ret
&= bdi_congested(&q
->backing_dev_info
, bits
);
599 static int flush_pending_writes(conf_t
*conf
)
601 /* Any writes that have been queued but are awaiting
602 * bitmap updates get flushed here.
603 * We return 1 if any requests were actually submitted.
607 spin_lock_irq(&conf
->device_lock
);
609 if (conf
->pending_bio_list
.head
) {
611 bio
= bio_list_get(&conf
->pending_bio_list
);
612 blk_remove_plug(conf
->mddev
->queue
);
613 spin_unlock_irq(&conf
->device_lock
);
614 /* flush any pending bitmap writes to
615 * disk before proceeding w/ I/O */
616 bitmap_unplug(conf
->mddev
->bitmap
);
618 while (bio
) { /* submit pending writes */
619 struct bio
*next
= bio
->bi_next
;
621 generic_make_request(bio
);
626 spin_unlock_irq(&conf
->device_lock
);
631 * Sometimes we need to suspend IO while we do something else,
632 * either some resync/recovery, or reconfigure the array.
633 * To do this we raise a 'barrier'.
634 * The 'barrier' is a counter that can be raised multiple times
635 * to count how many activities are happening which preclude
637 * We can only raise the barrier if there is no pending IO.
638 * i.e. if nr_pending == 0.
639 * We choose only to raise the barrier if no-one is waiting for the
640 * barrier to go down. This means that as soon as an IO request
641 * is ready, no other operations which require a barrier will start
642 * until the IO request has had a chance.
644 * So: regular IO calls 'wait_barrier'. When that returns there
645 * is no backgroup IO happening, It must arrange to call
646 * allow_barrier when it has finished its IO.
647 * backgroup IO calls must call raise_barrier. Once that returns
648 * there is no normal IO happeing. It must arrange to call
649 * lower_barrier when the particular background IO completes.
651 #define RESYNC_DEPTH 32
653 static void raise_barrier(conf_t
*conf
)
655 spin_lock_irq(&conf
->resync_lock
);
657 /* Wait until no block IO is waiting */
658 wait_event_lock_irq(conf
->wait_barrier
, !conf
->nr_waiting
,
660 raid1_unplug(conf
->mddev
->queue
));
662 /* block any new IO from starting */
665 /* No wait for all pending IO to complete */
666 wait_event_lock_irq(conf
->wait_barrier
,
667 !conf
->nr_pending
&& conf
->barrier
< RESYNC_DEPTH
,
669 raid1_unplug(conf
->mddev
->queue
));
671 spin_unlock_irq(&conf
->resync_lock
);
674 static void lower_barrier(conf_t
*conf
)
677 spin_lock_irqsave(&conf
->resync_lock
, flags
);
679 spin_unlock_irqrestore(&conf
->resync_lock
, flags
);
680 wake_up(&conf
->wait_barrier
);
683 static void wait_barrier(conf_t
*conf
)
685 spin_lock_irq(&conf
->resync_lock
);
688 wait_event_lock_irq(conf
->wait_barrier
, !conf
->barrier
,
690 raid1_unplug(conf
->mddev
->queue
));
694 spin_unlock_irq(&conf
->resync_lock
);
697 static void allow_barrier(conf_t
*conf
)
700 spin_lock_irqsave(&conf
->resync_lock
, flags
);
702 spin_unlock_irqrestore(&conf
->resync_lock
, flags
);
703 wake_up(&conf
->wait_barrier
);
706 static void freeze_array(conf_t
*conf
)
708 /* stop syncio and normal IO and wait for everything to
710 * We increment barrier and nr_waiting, and then
711 * wait until nr_pending match nr_queued+1
712 * This is called in the context of one normal IO request
713 * that has failed. Thus any sync request that might be pending
714 * will be blocked by nr_pending, and we need to wait for
715 * pending IO requests to complete or be queued for re-try.
716 * Thus the number queued (nr_queued) plus this request (1)
717 * must match the number of pending IOs (nr_pending) before
720 spin_lock_irq(&conf
->resync_lock
);
723 wait_event_lock_irq(conf
->wait_barrier
,
724 conf
->nr_pending
== conf
->nr_queued
+1,
726 ({ flush_pending_writes(conf
);
727 raid1_unplug(conf
->mddev
->queue
); }));
728 spin_unlock_irq(&conf
->resync_lock
);
730 static void unfreeze_array(conf_t
*conf
)
732 /* reverse the effect of the freeze */
733 spin_lock_irq(&conf
->resync_lock
);
736 wake_up(&conf
->wait_barrier
);
737 spin_unlock_irq(&conf
->resync_lock
);
741 /* duplicate the data pages for behind I/O */
742 static struct page
**alloc_behind_pages(struct bio
*bio
)
745 struct bio_vec
*bvec
;
746 struct page
**pages
= kzalloc(bio
->bi_vcnt
* sizeof(struct page
*),
748 if (unlikely(!pages
))
751 bio_for_each_segment(bvec
, bio
, i
) {
752 pages
[i
] = alloc_page(GFP_NOIO
);
753 if (unlikely(!pages
[i
]))
755 memcpy(kmap(pages
[i
]) + bvec
->bv_offset
,
756 kmap(bvec
->bv_page
) + bvec
->bv_offset
, bvec
->bv_len
);
758 kunmap(bvec
->bv_page
);
765 for (i
= 0; i
< bio
->bi_vcnt
&& pages
[i
]; i
++)
768 PRINTK("%dB behind alloc failed, doing sync I/O\n", bio
->bi_size
);
772 static int make_request(struct request_queue
*q
, struct bio
* bio
)
774 mddev_t
*mddev
= q
->queuedata
;
775 conf_t
*conf
= mddev
->private;
776 mirror_info_t
*mirror
;
778 struct bio
*read_bio
;
779 int i
, targets
= 0, disks
;
780 struct bitmap
*bitmap
;
783 struct page
**behind_pages
= NULL
;
784 const int rw
= bio_data_dir(bio
);
785 const int do_sync
= bio_sync(bio
);
786 int cpu
, do_barriers
;
787 mdk_rdev_t
*blocked_rdev
;
790 * Register the new request and wait if the reconstruction
791 * thread has put up a bar for new requests.
792 * Continue immediately if no resync is active currently.
793 * We test barriers_work *after* md_write_start as md_write_start
794 * may cause the first superblock write, and that will check out
798 md_write_start(mddev
, bio
); /* wait on superblock update early */
800 if (unlikely(!mddev
->barriers_work
&& bio_barrier(bio
))) {
803 bio_endio(bio
, -EOPNOTSUPP
);
809 bitmap
= mddev
->bitmap
;
811 cpu
= part_stat_lock();
812 part_stat_inc(cpu
, &mddev
->gendisk
->part0
, ios
[rw
]);
813 part_stat_add(cpu
, &mddev
->gendisk
->part0
, sectors
[rw
],
818 * make_request() can abort the operation when READA is being
819 * used and no empty request is available.
822 r1_bio
= mempool_alloc(conf
->r1bio_pool
, GFP_NOIO
);
824 r1_bio
->master_bio
= bio
;
825 r1_bio
->sectors
= bio
->bi_size
>> 9;
827 r1_bio
->mddev
= mddev
;
828 r1_bio
->sector
= bio
->bi_sector
;
832 * read balancing logic:
834 int rdisk
= read_balance(conf
, r1_bio
);
837 /* couldn't find anywhere to read from */
838 raid_end_bio_io(r1_bio
);
841 mirror
= conf
->mirrors
+ rdisk
;
843 r1_bio
->read_disk
= rdisk
;
845 read_bio
= bio_clone(bio
, GFP_NOIO
);
847 r1_bio
->bios
[rdisk
] = read_bio
;
849 read_bio
->bi_sector
= r1_bio
->sector
+ mirror
->rdev
->data_offset
;
850 read_bio
->bi_bdev
= mirror
->rdev
->bdev
;
851 read_bio
->bi_end_io
= raid1_end_read_request
;
852 read_bio
->bi_rw
= READ
| do_sync
;
853 read_bio
->bi_private
= r1_bio
;
855 generic_make_request(read_bio
);
862 /* first select target devices under spinlock and
863 * inc refcount on their rdev. Record them by setting
866 disks
= conf
->raid_disks
;
868 { static int first
=1;
869 if (first
) printk("First Write sector %llu disks %d\n",
870 (unsigned long long)r1_bio
->sector
, disks
);
877 for (i
= 0; i
< disks
; i
++) {
878 mdk_rdev_t
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
879 if (rdev
&& unlikely(test_bit(Blocked
, &rdev
->flags
))) {
880 atomic_inc(&rdev
->nr_pending
);
884 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
)) {
885 atomic_inc(&rdev
->nr_pending
);
886 if (test_bit(Faulty
, &rdev
->flags
)) {
887 rdev_dec_pending(rdev
, mddev
);
888 r1_bio
->bios
[i
] = NULL
;
890 r1_bio
->bios
[i
] = bio
;
893 r1_bio
->bios
[i
] = NULL
;
897 if (unlikely(blocked_rdev
)) {
898 /* Wait for this device to become unblocked */
901 for (j
= 0; j
< i
; j
++)
903 rdev_dec_pending(conf
->mirrors
[j
].rdev
, mddev
);
906 md_wait_for_blocked_rdev(blocked_rdev
, mddev
);
911 BUG_ON(targets
== 0); /* we never fail the last device */
913 if (targets
< conf
->raid_disks
) {
914 /* array is degraded, we will not clear the bitmap
915 * on I/O completion (see raid1_end_write_request) */
916 set_bit(R1BIO_Degraded
, &r1_bio
->state
);
919 /* do behind I/O ? */
921 atomic_read(&bitmap
->behind_writes
) < bitmap
->max_write_behind
&&
922 (behind_pages
= alloc_behind_pages(bio
)) != NULL
)
923 set_bit(R1BIO_BehindIO
, &r1_bio
->state
);
925 atomic_set(&r1_bio
->remaining
, 0);
926 atomic_set(&r1_bio
->behind_remaining
, 0);
928 do_barriers
= bio_barrier(bio
);
930 set_bit(R1BIO_Barrier
, &r1_bio
->state
);
933 for (i
= 0; i
< disks
; i
++) {
935 if (!r1_bio
->bios
[i
])
938 mbio
= bio_clone(bio
, GFP_NOIO
);
939 r1_bio
->bios
[i
] = mbio
;
941 mbio
->bi_sector
= r1_bio
->sector
+ conf
->mirrors
[i
].rdev
->data_offset
;
942 mbio
->bi_bdev
= conf
->mirrors
[i
].rdev
->bdev
;
943 mbio
->bi_end_io
= raid1_end_write_request
;
944 mbio
->bi_rw
= WRITE
| do_barriers
| do_sync
;
945 mbio
->bi_private
= r1_bio
;
948 struct bio_vec
*bvec
;
951 /* Yes, I really want the '__' version so that
952 * we clear any unused pointer in the io_vec, rather
953 * than leave them unchanged. This is important
954 * because when we come to free the pages, we won't
955 * know the originial bi_idx, so we just free
958 __bio_for_each_segment(bvec
, mbio
, j
, 0)
959 bvec
->bv_page
= behind_pages
[j
];
960 if (test_bit(WriteMostly
, &conf
->mirrors
[i
].rdev
->flags
))
961 atomic_inc(&r1_bio
->behind_remaining
);
964 atomic_inc(&r1_bio
->remaining
);
966 bio_list_add(&bl
, mbio
);
968 kfree(behind_pages
); /* the behind pages are attached to the bios now */
970 bitmap_startwrite(bitmap
, bio
->bi_sector
, r1_bio
->sectors
,
971 test_bit(R1BIO_BehindIO
, &r1_bio
->state
));
972 spin_lock_irqsave(&conf
->device_lock
, flags
);
973 bio_list_merge(&conf
->pending_bio_list
, &bl
);
976 blk_plug_device(mddev
->queue
);
977 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
979 /* In case raid1d snuck into freeze_array */
980 wake_up(&conf
->wait_barrier
);
983 md_wakeup_thread(mddev
->thread
);
985 while ((bio
= bio_list_pop(&bl
)) != NULL
)
986 generic_make_request(bio
);
992 static void status(struct seq_file
*seq
, mddev_t
*mddev
)
994 conf_t
*conf
= mddev
->private;
997 seq_printf(seq
, " [%d/%d] [", conf
->raid_disks
,
998 conf
->raid_disks
- mddev
->degraded
);
1000 for (i
= 0; i
< conf
->raid_disks
; i
++) {
1001 mdk_rdev_t
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
1002 seq_printf(seq
, "%s",
1003 rdev
&& test_bit(In_sync
, &rdev
->flags
) ? "U" : "_");
1006 seq_printf(seq
, "]");
1010 static void error(mddev_t
*mddev
, mdk_rdev_t
*rdev
)
1012 char b
[BDEVNAME_SIZE
];
1013 conf_t
*conf
= mddev
->private;
1016 * If it is not operational, then we have already marked it as dead
1017 * else if it is the last working disks, ignore the error, let the
1018 * next level up know.
1019 * else mark the drive as failed
1021 if (test_bit(In_sync
, &rdev
->flags
)
1022 && (conf
->raid_disks
- mddev
->degraded
) == 1) {
1024 * Don't fail the drive, act as though we were just a
1025 * normal single drive.
1026 * However don't try a recovery from this drive as
1027 * it is very likely to fail.
1029 mddev
->recovery_disabled
= 1;
1032 if (test_and_clear_bit(In_sync
, &rdev
->flags
)) {
1033 unsigned long flags
;
1034 spin_lock_irqsave(&conf
->device_lock
, flags
);
1036 set_bit(Faulty
, &rdev
->flags
);
1037 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1039 * if recovery is running, make sure it aborts.
1041 set_bit(MD_RECOVERY_INTR
, &mddev
->recovery
);
1043 set_bit(Faulty
, &rdev
->flags
);
1044 set_bit(MD_CHANGE_DEVS
, &mddev
->flags
);
1045 printk(KERN_ALERT
"raid1: Disk failure on %s, disabling device.\n"
1046 "raid1: Operation continuing on %d devices.\n",
1047 bdevname(rdev
->bdev
,b
), conf
->raid_disks
- mddev
->degraded
);
1050 static void print_conf(conf_t
*conf
)
1054 printk("RAID1 conf printout:\n");
1056 printk("(!conf)\n");
1059 printk(" --- wd:%d rd:%d\n", conf
->raid_disks
- conf
->mddev
->degraded
,
1063 for (i
= 0; i
< conf
->raid_disks
; i
++) {
1064 char b
[BDEVNAME_SIZE
];
1065 mdk_rdev_t
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
1067 printk(" disk %d, wo:%d, o:%d, dev:%s\n",
1068 i
, !test_bit(In_sync
, &rdev
->flags
),
1069 !test_bit(Faulty
, &rdev
->flags
),
1070 bdevname(rdev
->bdev
,b
));
1075 static void close_sync(conf_t
*conf
)
1078 allow_barrier(conf
);
1080 mempool_destroy(conf
->r1buf_pool
);
1081 conf
->r1buf_pool
= NULL
;
1084 static int raid1_spare_active(mddev_t
*mddev
)
1087 conf_t
*conf
= mddev
->private;
1090 * Find all failed disks within the RAID1 configuration
1091 * and mark them readable.
1092 * Called under mddev lock, so rcu protection not needed.
1094 for (i
= 0; i
< conf
->raid_disks
; i
++) {
1095 mdk_rdev_t
*rdev
= conf
->mirrors
[i
].rdev
;
1097 && !test_bit(Faulty
, &rdev
->flags
)
1098 && !test_and_set_bit(In_sync
, &rdev
->flags
)) {
1099 unsigned long flags
;
1100 spin_lock_irqsave(&conf
->device_lock
, flags
);
1102 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1111 static int raid1_add_disk(mddev_t
*mddev
, mdk_rdev_t
*rdev
)
1113 conf_t
*conf
= mddev
->private;
1118 int last
= mddev
->raid_disks
- 1;
1120 if (rdev
->raid_disk
>= 0)
1121 first
= last
= rdev
->raid_disk
;
1123 for (mirror
= first
; mirror
<= last
; mirror
++)
1124 if ( !(p
=conf
->mirrors
+mirror
)->rdev
) {
1126 disk_stack_limits(mddev
->gendisk
, rdev
->bdev
,
1127 rdev
->data_offset
<< 9);
1128 /* as we don't honour merge_bvec_fn, we must never risk
1129 * violating it, so limit ->max_sector to one PAGE, as
1130 * a one page request is never in violation.
1132 if (rdev
->bdev
->bd_disk
->queue
->merge_bvec_fn
&&
1133 queue_max_sectors(mddev
->queue
) > (PAGE_SIZE
>>9))
1134 blk_queue_max_sectors(mddev
->queue
, PAGE_SIZE
>>9);
1136 p
->head_position
= 0;
1137 rdev
->raid_disk
= mirror
;
1139 /* As all devices are equivalent, we don't need a full recovery
1140 * if this was recently any drive of the array
1142 if (rdev
->saved_raid_disk
< 0)
1144 rcu_assign_pointer(p
->rdev
, rdev
);
1147 md_integrity_add_rdev(rdev
, mddev
);
1152 static int raid1_remove_disk(mddev_t
*mddev
, int number
)
1154 conf_t
*conf
= mddev
->private;
1157 mirror_info_t
*p
= conf
->mirrors
+ number
;
1162 if (test_bit(In_sync
, &rdev
->flags
) ||
1163 atomic_read(&rdev
->nr_pending
)) {
1167 /* Only remove non-faulty devices is recovery
1170 if (!test_bit(Faulty
, &rdev
->flags
) &&
1171 mddev
->degraded
< conf
->raid_disks
) {
1177 if (atomic_read(&rdev
->nr_pending
)) {
1178 /* lost the race, try later */
1183 md_integrity_register(mddev
);
1192 static void end_sync_read(struct bio
*bio
, int error
)
1194 r1bio_t
* r1_bio
= (r1bio_t
*)(bio
->bi_private
);
1197 for (i
=r1_bio
->mddev
->raid_disks
; i
--; )
1198 if (r1_bio
->bios
[i
] == bio
)
1201 update_head_pos(i
, r1_bio
);
1203 * we have read a block, now it needs to be re-written,
1204 * or re-read if the read failed.
1205 * We don't do much here, just schedule handling by raid1d
1207 if (test_bit(BIO_UPTODATE
, &bio
->bi_flags
))
1208 set_bit(R1BIO_Uptodate
, &r1_bio
->state
);
1210 if (atomic_dec_and_test(&r1_bio
->remaining
))
1211 reschedule_retry(r1_bio
);
1214 static void end_sync_write(struct bio
*bio
, int error
)
1216 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
1217 r1bio_t
* r1_bio
= (r1bio_t
*)(bio
->bi_private
);
1218 mddev_t
*mddev
= r1_bio
->mddev
;
1219 conf_t
*conf
= mddev
->private;
1223 for (i
= 0; i
< conf
->raid_disks
; i
++)
1224 if (r1_bio
->bios
[i
] == bio
) {
1229 int sync_blocks
= 0;
1230 sector_t s
= r1_bio
->sector
;
1231 long sectors_to_go
= r1_bio
->sectors
;
1232 /* make sure these bits doesn't get cleared. */
1234 bitmap_end_sync(mddev
->bitmap
, s
,
1237 sectors_to_go
-= sync_blocks
;
1238 } while (sectors_to_go
> 0);
1239 md_error(mddev
, conf
->mirrors
[mirror
].rdev
);
1242 update_head_pos(mirror
, r1_bio
);
1244 if (atomic_dec_and_test(&r1_bio
->remaining
)) {
1245 sector_t s
= r1_bio
->sectors
;
1247 md_done_sync(mddev
, s
, uptodate
);
1251 static void sync_request_write(mddev_t
*mddev
, r1bio_t
*r1_bio
)
1253 conf_t
*conf
= mddev
->private;
1255 int disks
= conf
->raid_disks
;
1256 struct bio
*bio
, *wbio
;
1258 bio
= r1_bio
->bios
[r1_bio
->read_disk
];
1261 if (test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
)) {
1262 /* We have read all readable devices. If we haven't
1263 * got the block, then there is no hope left.
1264 * If we have, then we want to do a comparison
1265 * and skip the write if everything is the same.
1266 * If any blocks failed to read, then we need to
1267 * attempt an over-write
1270 if (!test_bit(R1BIO_Uptodate
, &r1_bio
->state
)) {
1271 for (i
=0; i
<mddev
->raid_disks
; i
++)
1272 if (r1_bio
->bios
[i
]->bi_end_io
== end_sync_read
)
1273 md_error(mddev
, conf
->mirrors
[i
].rdev
);
1275 md_done_sync(mddev
, r1_bio
->sectors
, 1);
1279 for (primary
=0; primary
<mddev
->raid_disks
; primary
++)
1280 if (r1_bio
->bios
[primary
]->bi_end_io
== end_sync_read
&&
1281 test_bit(BIO_UPTODATE
, &r1_bio
->bios
[primary
]->bi_flags
)) {
1282 r1_bio
->bios
[primary
]->bi_end_io
= NULL
;
1283 rdev_dec_pending(conf
->mirrors
[primary
].rdev
, mddev
);
1286 r1_bio
->read_disk
= primary
;
1287 for (i
=0; i
<mddev
->raid_disks
; i
++)
1288 if (r1_bio
->bios
[i
]->bi_end_io
== end_sync_read
) {
1290 int vcnt
= r1_bio
->sectors
>> (PAGE_SHIFT
- 9);
1291 struct bio
*pbio
= r1_bio
->bios
[primary
];
1292 struct bio
*sbio
= r1_bio
->bios
[i
];
1294 if (test_bit(BIO_UPTODATE
, &sbio
->bi_flags
)) {
1295 for (j
= vcnt
; j
-- ; ) {
1297 p
= pbio
->bi_io_vec
[j
].bv_page
;
1298 s
= sbio
->bi_io_vec
[j
].bv_page
;
1299 if (memcmp(page_address(p
),
1307 mddev
->resync_mismatches
+= r1_bio
->sectors
;
1308 if (j
< 0 || (test_bit(MD_RECOVERY_CHECK
, &mddev
->recovery
)
1309 && test_bit(BIO_UPTODATE
, &sbio
->bi_flags
))) {
1310 sbio
->bi_end_io
= NULL
;
1311 rdev_dec_pending(conf
->mirrors
[i
].rdev
, mddev
);
1313 /* fixup the bio for reuse */
1315 sbio
->bi_vcnt
= vcnt
;
1316 sbio
->bi_size
= r1_bio
->sectors
<< 9;
1318 sbio
->bi_phys_segments
= 0;
1319 sbio
->bi_flags
&= ~(BIO_POOL_MASK
- 1);
1320 sbio
->bi_flags
|= 1 << BIO_UPTODATE
;
1321 sbio
->bi_next
= NULL
;
1322 sbio
->bi_sector
= r1_bio
->sector
+
1323 conf
->mirrors
[i
].rdev
->data_offset
;
1324 sbio
->bi_bdev
= conf
->mirrors
[i
].rdev
->bdev
;
1325 size
= sbio
->bi_size
;
1326 for (j
= 0; j
< vcnt
; j
++) {
1328 bi
= &sbio
->bi_io_vec
[j
];
1330 if (size
> PAGE_SIZE
)
1331 bi
->bv_len
= PAGE_SIZE
;
1335 memcpy(page_address(bi
->bv_page
),
1336 page_address(pbio
->bi_io_vec
[j
].bv_page
),
1343 if (!test_bit(R1BIO_Uptodate
, &r1_bio
->state
)) {
1344 /* ouch - failed to read all of that.
1345 * Try some synchronous reads of other devices to get
1346 * good data, much like with normal read errors. Only
1347 * read into the pages we already have so we don't
1348 * need to re-issue the read request.
1349 * We don't need to freeze the array, because being in an
1350 * active sync request, there is no normal IO, and
1351 * no overlapping syncs.
1353 sector_t sect
= r1_bio
->sector
;
1354 int sectors
= r1_bio
->sectors
;
1359 int d
= r1_bio
->read_disk
;
1363 if (s
> (PAGE_SIZE
>>9))
1366 if (r1_bio
->bios
[d
]->bi_end_io
== end_sync_read
) {
1367 /* No rcu protection needed here devices
1368 * can only be removed when no resync is
1369 * active, and resync is currently active
1371 rdev
= conf
->mirrors
[d
].rdev
;
1372 if (sync_page_io(rdev
->bdev
,
1373 sect
+ rdev
->data_offset
,
1375 bio
->bi_io_vec
[idx
].bv_page
,
1382 if (d
== conf
->raid_disks
)
1384 } while (!success
&& d
!= r1_bio
->read_disk
);
1388 /* write it back and re-read */
1389 set_bit(R1BIO_Uptodate
, &r1_bio
->state
);
1390 while (d
!= r1_bio
->read_disk
) {
1392 d
= conf
->raid_disks
;
1394 if (r1_bio
->bios
[d
]->bi_end_io
!= end_sync_read
)
1396 rdev
= conf
->mirrors
[d
].rdev
;
1397 atomic_add(s
, &rdev
->corrected_errors
);
1398 if (sync_page_io(rdev
->bdev
,
1399 sect
+ rdev
->data_offset
,
1401 bio
->bi_io_vec
[idx
].bv_page
,
1403 md_error(mddev
, rdev
);
1406 while (d
!= r1_bio
->read_disk
) {
1408 d
= conf
->raid_disks
;
1410 if (r1_bio
->bios
[d
]->bi_end_io
!= end_sync_read
)
1412 rdev
= conf
->mirrors
[d
].rdev
;
1413 if (sync_page_io(rdev
->bdev
,
1414 sect
+ rdev
->data_offset
,
1416 bio
->bi_io_vec
[idx
].bv_page
,
1418 md_error(mddev
, rdev
);
1421 char b
[BDEVNAME_SIZE
];
1422 /* Cannot read from anywhere, array is toast */
1423 md_error(mddev
, conf
->mirrors
[r1_bio
->read_disk
].rdev
);
1424 printk(KERN_ALERT
"raid1: %s: unrecoverable I/O read error"
1425 " for block %llu\n",
1426 bdevname(bio
->bi_bdev
,b
),
1427 (unsigned long long)r1_bio
->sector
);
1428 md_done_sync(mddev
, r1_bio
->sectors
, 0);
1441 atomic_set(&r1_bio
->remaining
, 1);
1442 for (i
= 0; i
< disks
; i
++) {
1443 wbio
= r1_bio
->bios
[i
];
1444 if (wbio
->bi_end_io
== NULL
||
1445 (wbio
->bi_end_io
== end_sync_read
&&
1446 (i
== r1_bio
->read_disk
||
1447 !test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
))))
1450 wbio
->bi_rw
= WRITE
;
1451 wbio
->bi_end_io
= end_sync_write
;
1452 atomic_inc(&r1_bio
->remaining
);
1453 md_sync_acct(conf
->mirrors
[i
].rdev
->bdev
, wbio
->bi_size
>> 9);
1455 generic_make_request(wbio
);
1458 if (atomic_dec_and_test(&r1_bio
->remaining
)) {
1459 /* if we're here, all write(s) have completed, so clean up */
1460 md_done_sync(mddev
, r1_bio
->sectors
, 1);
1466 * This is a kernel thread which:
1468 * 1. Retries failed read operations on working mirrors.
1469 * 2. Updates the raid superblock when problems encounter.
1470 * 3. Performs writes following reads for array syncronising.
1473 static void fix_read_error(conf_t
*conf
, int read_disk
,
1474 sector_t sect
, int sectors
)
1476 mddev_t
*mddev
= conf
->mddev
;
1484 if (s
> (PAGE_SIZE
>>9))
1488 /* Note: no rcu protection needed here
1489 * as this is synchronous in the raid1d thread
1490 * which is the thread that might remove
1491 * a device. If raid1d ever becomes multi-threaded....
1493 rdev
= conf
->mirrors
[d
].rdev
;
1495 test_bit(In_sync
, &rdev
->flags
) &&
1496 sync_page_io(rdev
->bdev
,
1497 sect
+ rdev
->data_offset
,
1499 conf
->tmppage
, READ
))
1503 if (d
== conf
->raid_disks
)
1506 } while (!success
&& d
!= read_disk
);
1509 /* Cannot read from anywhere -- bye bye array */
1510 md_error(mddev
, conf
->mirrors
[read_disk
].rdev
);
1513 /* write it back and re-read */
1515 while (d
!= read_disk
) {
1517 d
= conf
->raid_disks
;
1519 rdev
= conf
->mirrors
[d
].rdev
;
1521 test_bit(In_sync
, &rdev
->flags
)) {
1522 if (sync_page_io(rdev
->bdev
,
1523 sect
+ rdev
->data_offset
,
1524 s
<<9, conf
->tmppage
, WRITE
)
1526 /* Well, this device is dead */
1527 md_error(mddev
, rdev
);
1531 while (d
!= read_disk
) {
1532 char b
[BDEVNAME_SIZE
];
1534 d
= conf
->raid_disks
;
1536 rdev
= conf
->mirrors
[d
].rdev
;
1538 test_bit(In_sync
, &rdev
->flags
)) {
1539 if (sync_page_io(rdev
->bdev
,
1540 sect
+ rdev
->data_offset
,
1541 s
<<9, conf
->tmppage
, READ
)
1543 /* Well, this device is dead */
1544 md_error(mddev
, rdev
);
1546 atomic_add(s
, &rdev
->corrected_errors
);
1548 "raid1:%s: read error corrected "
1549 "(%d sectors at %llu on %s)\n",
1551 (unsigned long long)(sect
+
1553 bdevname(rdev
->bdev
, b
));
1562 static void raid1d(mddev_t
*mddev
)
1566 unsigned long flags
;
1567 conf_t
*conf
= mddev
->private;
1568 struct list_head
*head
= &conf
->retry_list
;
1572 md_check_recovery(mddev
);
1575 char b
[BDEVNAME_SIZE
];
1577 unplug
+= flush_pending_writes(conf
);
1579 spin_lock_irqsave(&conf
->device_lock
, flags
);
1580 if (list_empty(head
)) {
1581 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1584 r1_bio
= list_entry(head
->prev
, r1bio_t
, retry_list
);
1585 list_del(head
->prev
);
1587 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1589 mddev
= r1_bio
->mddev
;
1590 conf
= mddev
->private;
1591 if (test_bit(R1BIO_IsSync
, &r1_bio
->state
)) {
1592 sync_request_write(mddev
, r1_bio
);
1594 } else if (test_bit(R1BIO_BarrierRetry
, &r1_bio
->state
)) {
1595 /* some requests in the r1bio were BIO_RW_BARRIER
1596 * requests which failed with -EOPNOTSUPP. Hohumm..
1597 * Better resubmit without the barrier.
1598 * We know which devices to resubmit for, because
1599 * all others have had their bios[] entry cleared.
1600 * We already have a nr_pending reference on these rdevs.
1603 const int do_sync
= bio_sync(r1_bio
->master_bio
);
1604 clear_bit(R1BIO_BarrierRetry
, &r1_bio
->state
);
1605 clear_bit(R1BIO_Barrier
, &r1_bio
->state
);
1606 for (i
=0; i
< conf
->raid_disks
; i
++)
1607 if (r1_bio
->bios
[i
])
1608 atomic_inc(&r1_bio
->remaining
);
1609 for (i
=0; i
< conf
->raid_disks
; i
++)
1610 if (r1_bio
->bios
[i
]) {
1611 struct bio_vec
*bvec
;
1614 bio
= bio_clone(r1_bio
->master_bio
, GFP_NOIO
);
1615 /* copy pages from the failed bio, as
1616 * this might be a write-behind device */
1617 __bio_for_each_segment(bvec
, bio
, j
, 0)
1618 bvec
->bv_page
= bio_iovec_idx(r1_bio
->bios
[i
], j
)->bv_page
;
1619 bio_put(r1_bio
->bios
[i
]);
1620 bio
->bi_sector
= r1_bio
->sector
+
1621 conf
->mirrors
[i
].rdev
->data_offset
;
1622 bio
->bi_bdev
= conf
->mirrors
[i
].rdev
->bdev
;
1623 bio
->bi_end_io
= raid1_end_write_request
;
1624 bio
->bi_rw
= WRITE
| do_sync
;
1625 bio
->bi_private
= r1_bio
;
1626 r1_bio
->bios
[i
] = bio
;
1627 generic_make_request(bio
);
1632 /* we got a read error. Maybe the drive is bad. Maybe just
1633 * the block and we can fix it.
1634 * We freeze all other IO, and try reading the block from
1635 * other devices. When we find one, we re-write
1636 * and check it that fixes the read error.
1637 * This is all done synchronously while the array is
1640 if (mddev
->ro
== 0) {
1642 fix_read_error(conf
, r1_bio
->read_disk
,
1645 unfreeze_array(conf
);
1648 bio
= r1_bio
->bios
[r1_bio
->read_disk
];
1649 if ((disk
=read_balance(conf
, r1_bio
)) == -1 ||
1650 disk
== r1_bio
->read_disk
) {
1651 printk(KERN_ALERT
"raid1: %s: unrecoverable I/O"
1652 " read error for block %llu\n",
1653 bdevname(bio
->bi_bdev
,b
),
1654 (unsigned long long)r1_bio
->sector
);
1655 raid_end_bio_io(r1_bio
);
1657 const int do_sync
= bio_sync(r1_bio
->master_bio
);
1658 r1_bio
->bios
[r1_bio
->read_disk
] =
1659 mddev
->ro
? IO_BLOCKED
: NULL
;
1660 r1_bio
->read_disk
= disk
;
1662 bio
= bio_clone(r1_bio
->master_bio
, GFP_NOIO
);
1663 r1_bio
->bios
[r1_bio
->read_disk
] = bio
;
1664 rdev
= conf
->mirrors
[disk
].rdev
;
1665 if (printk_ratelimit())
1666 printk(KERN_ERR
"raid1: %s: redirecting sector %llu to"
1667 " another mirror\n",
1668 bdevname(rdev
->bdev
,b
),
1669 (unsigned long long)r1_bio
->sector
);
1670 bio
->bi_sector
= r1_bio
->sector
+ rdev
->data_offset
;
1671 bio
->bi_bdev
= rdev
->bdev
;
1672 bio
->bi_end_io
= raid1_end_read_request
;
1673 bio
->bi_rw
= READ
| do_sync
;
1674 bio
->bi_private
= r1_bio
;
1676 generic_make_request(bio
);
1681 unplug_slaves(mddev
);
1685 static int init_resync(conf_t
*conf
)
1689 buffs
= RESYNC_WINDOW
/ RESYNC_BLOCK_SIZE
;
1690 BUG_ON(conf
->r1buf_pool
);
1691 conf
->r1buf_pool
= mempool_create(buffs
, r1buf_pool_alloc
, r1buf_pool_free
,
1693 if (!conf
->r1buf_pool
)
1695 conf
->next_resync
= 0;
1700 * perform a "sync" on one "block"
1702 * We need to make sure that no normal I/O request - particularly write
1703 * requests - conflict with active sync requests.
1705 * This is achieved by tracking pending requests and a 'barrier' concept
1706 * that can be installed to exclude normal IO requests.
1709 static sector_t
sync_request(mddev_t
*mddev
, sector_t sector_nr
, int *skipped
, int go_faster
)
1711 conf_t
*conf
= mddev
->private;
1714 sector_t max_sector
, nr_sectors
;
1718 int write_targets
= 0, read_targets
= 0;
1720 int still_degraded
= 0;
1722 if (!conf
->r1buf_pool
)
1725 printk("sync start - bitmap %p\n", mddev->bitmap);
1727 if (init_resync(conf
))
1731 max_sector
= mddev
->dev_sectors
;
1732 if (sector_nr
>= max_sector
) {
1733 /* If we aborted, we need to abort the
1734 * sync on the 'current' bitmap chunk (there will
1735 * only be one in raid1 resync.
1736 * We can find the current addess in mddev->curr_resync
1738 if (mddev
->curr_resync
< max_sector
) /* aborted */
1739 bitmap_end_sync(mddev
->bitmap
, mddev
->curr_resync
,
1741 else /* completed sync */
1744 bitmap_close_sync(mddev
->bitmap
);
1749 if (mddev
->bitmap
== NULL
&&
1750 mddev
->recovery_cp
== MaxSector
&&
1751 !test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
) &&
1752 conf
->fullsync
== 0) {
1754 return max_sector
- sector_nr
;
1756 /* before building a request, check if we can skip these blocks..
1757 * This call the bitmap_start_sync doesn't actually record anything
1759 if (!bitmap_start_sync(mddev
->bitmap
, sector_nr
, &sync_blocks
, 1) &&
1760 !conf
->fullsync
&& !test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
)) {
1761 /* We can skip this block, and probably several more */
1766 * If there is non-resync activity waiting for a turn,
1767 * and resync is going fast enough,
1768 * then let it though before starting on this new sync request.
1770 if (!go_faster
&& conf
->nr_waiting
)
1771 msleep_interruptible(1000);
1773 bitmap_cond_end_sync(mddev
->bitmap
, sector_nr
);
1774 raise_barrier(conf
);
1776 conf
->next_resync
= sector_nr
;
1778 r1_bio
= mempool_alloc(conf
->r1buf_pool
, GFP_NOIO
);
1781 * If we get a correctably read error during resync or recovery,
1782 * we might want to read from a different device. So we
1783 * flag all drives that could conceivably be read from for READ,
1784 * and any others (which will be non-In_sync devices) for WRITE.
1785 * If a read fails, we try reading from something else for which READ
1789 r1_bio
->mddev
= mddev
;
1790 r1_bio
->sector
= sector_nr
;
1792 set_bit(R1BIO_IsSync
, &r1_bio
->state
);
1794 for (i
=0; i
< conf
->raid_disks
; i
++) {
1796 bio
= r1_bio
->bios
[i
];
1798 /* take from bio_init */
1799 bio
->bi_next
= NULL
;
1800 bio
->bi_flags
|= 1 << BIO_UPTODATE
;
1804 bio
->bi_phys_segments
= 0;
1806 bio
->bi_end_io
= NULL
;
1807 bio
->bi_private
= NULL
;
1809 rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
1811 test_bit(Faulty
, &rdev
->flags
)) {
1814 } else if (!test_bit(In_sync
, &rdev
->flags
)) {
1816 bio
->bi_end_io
= end_sync_write
;
1819 /* may need to read from here */
1821 bio
->bi_end_io
= end_sync_read
;
1822 if (test_bit(WriteMostly
, &rdev
->flags
)) {
1831 atomic_inc(&rdev
->nr_pending
);
1832 bio
->bi_sector
= sector_nr
+ rdev
->data_offset
;
1833 bio
->bi_bdev
= rdev
->bdev
;
1834 bio
->bi_private
= r1_bio
;
1839 r1_bio
->read_disk
= disk
;
1841 if (test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
) && read_targets
> 0)
1842 /* extra read targets are also write targets */
1843 write_targets
+= read_targets
-1;
1845 if (write_targets
== 0 || read_targets
== 0) {
1846 /* There is nowhere to write, so all non-sync
1847 * drives must be failed - so we are finished
1849 sector_t rv
= max_sector
- sector_nr
;
1855 if (max_sector
> mddev
->resync_max
)
1856 max_sector
= mddev
->resync_max
; /* Don't do IO beyond here */
1861 int len
= PAGE_SIZE
;
1862 if (sector_nr
+ (len
>>9) > max_sector
)
1863 len
= (max_sector
- sector_nr
) << 9;
1866 if (sync_blocks
== 0) {
1867 if (!bitmap_start_sync(mddev
->bitmap
, sector_nr
,
1868 &sync_blocks
, still_degraded
) &&
1870 !test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
))
1872 BUG_ON(sync_blocks
< (PAGE_SIZE
>>9));
1873 if (len
> (sync_blocks
<<9))
1874 len
= sync_blocks
<<9;
1877 for (i
=0 ; i
< conf
->raid_disks
; i
++) {
1878 bio
= r1_bio
->bios
[i
];
1879 if (bio
->bi_end_io
) {
1880 page
= bio
->bi_io_vec
[bio
->bi_vcnt
].bv_page
;
1881 if (bio_add_page(bio
, page
, len
, 0) == 0) {
1883 bio
->bi_io_vec
[bio
->bi_vcnt
].bv_page
= page
;
1886 bio
= r1_bio
->bios
[i
];
1887 if (bio
->bi_end_io
==NULL
)
1889 /* remove last page from this bio */
1891 bio
->bi_size
-= len
;
1892 bio
->bi_flags
&= ~(1<< BIO_SEG_VALID
);
1898 nr_sectors
+= len
>>9;
1899 sector_nr
+= len
>>9;
1900 sync_blocks
-= (len
>>9);
1901 } while (r1_bio
->bios
[disk
]->bi_vcnt
< RESYNC_PAGES
);
1903 r1_bio
->sectors
= nr_sectors
;
1905 /* For a user-requested sync, we read all readable devices and do a
1908 if (test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
)) {
1909 atomic_set(&r1_bio
->remaining
, read_targets
);
1910 for (i
=0; i
<conf
->raid_disks
; i
++) {
1911 bio
= r1_bio
->bios
[i
];
1912 if (bio
->bi_end_io
== end_sync_read
) {
1913 md_sync_acct(bio
->bi_bdev
, nr_sectors
);
1914 generic_make_request(bio
);
1918 atomic_set(&r1_bio
->remaining
, 1);
1919 bio
= r1_bio
->bios
[r1_bio
->read_disk
];
1920 md_sync_acct(bio
->bi_bdev
, nr_sectors
);
1921 generic_make_request(bio
);
1927 static sector_t
raid1_size(mddev_t
*mddev
, sector_t sectors
, int raid_disks
)
1932 return mddev
->dev_sectors
;
1935 static int run(mddev_t
*mddev
)
1939 mirror_info_t
*disk
;
1942 if (mddev
->level
!= 1) {
1943 printk("raid1: %s: raid level not set to mirroring (%d)\n",
1944 mdname(mddev
), mddev
->level
);
1947 if (mddev
->reshape_position
!= MaxSector
) {
1948 printk("raid1: %s: reshape_position set but not supported\n",
1953 * copy the already verified devices into our private RAID1
1954 * bookkeeping area. [whatever we allocate in run(),
1955 * should be freed in stop()]
1957 conf
= kzalloc(sizeof(conf_t
), GFP_KERNEL
);
1958 mddev
->private = conf
;
1962 conf
->mirrors
= kzalloc(sizeof(struct mirror_info
)*mddev
->raid_disks
,
1967 conf
->tmppage
= alloc_page(GFP_KERNEL
);
1971 conf
->poolinfo
= kmalloc(sizeof(*conf
->poolinfo
), GFP_KERNEL
);
1972 if (!conf
->poolinfo
)
1974 conf
->poolinfo
->mddev
= mddev
;
1975 conf
->poolinfo
->raid_disks
= mddev
->raid_disks
;
1976 conf
->r1bio_pool
= mempool_create(NR_RAID1_BIOS
, r1bio_pool_alloc
,
1979 if (!conf
->r1bio_pool
)
1982 spin_lock_init(&conf
->device_lock
);
1983 mddev
->queue
->queue_lock
= &conf
->device_lock
;
1985 list_for_each_entry(rdev
, &mddev
->disks
, same_set
) {
1986 disk_idx
= rdev
->raid_disk
;
1987 if (disk_idx
>= mddev
->raid_disks
1990 disk
= conf
->mirrors
+ disk_idx
;
1993 disk_stack_limits(mddev
->gendisk
, rdev
->bdev
,
1994 rdev
->data_offset
<< 9);
1995 /* as we don't honour merge_bvec_fn, we must never risk
1996 * violating it, so limit ->max_sector to one PAGE, as
1997 * a one page request is never in violation.
1999 if (rdev
->bdev
->bd_disk
->queue
->merge_bvec_fn
&&
2000 queue_max_sectors(mddev
->queue
) > (PAGE_SIZE
>>9))
2001 blk_queue_max_sectors(mddev
->queue
, PAGE_SIZE
>>9);
2003 disk
->head_position
= 0;
2005 conf
->raid_disks
= mddev
->raid_disks
;
2006 conf
->mddev
= mddev
;
2007 INIT_LIST_HEAD(&conf
->retry_list
);
2009 spin_lock_init(&conf
->resync_lock
);
2010 init_waitqueue_head(&conf
->wait_barrier
);
2012 bio_list_init(&conf
->pending_bio_list
);
2013 bio_list_init(&conf
->flushing_bio_list
);
2016 mddev
->degraded
= 0;
2017 for (i
= 0; i
< conf
->raid_disks
; i
++) {
2019 disk
= conf
->mirrors
+ i
;
2022 !test_bit(In_sync
, &disk
->rdev
->flags
)) {
2023 disk
->head_position
= 0;
2029 if (mddev
->degraded
== conf
->raid_disks
) {
2030 printk(KERN_ERR
"raid1: no operational mirrors for %s\n",
2034 if (conf
->raid_disks
- mddev
->degraded
== 1)
2035 mddev
->recovery_cp
= MaxSector
;
2038 * find the first working one and use it as a starting point
2039 * to read balancing.
2041 for (j
= 0; j
< conf
->raid_disks
&&
2042 (!conf
->mirrors
[j
].rdev
||
2043 !test_bit(In_sync
, &conf
->mirrors
[j
].rdev
->flags
)) ; j
++)
2045 conf
->last_used
= j
;
2048 mddev
->thread
= md_register_thread(raid1d
, mddev
, "%s_raid1");
2049 if (!mddev
->thread
) {
2051 "raid1: couldn't allocate thread for %s\n",
2056 if (mddev
->recovery_cp
!= MaxSector
)
2057 printk(KERN_NOTICE
"raid1: %s is not clean"
2058 " -- starting background reconstruction\n",
2061 "raid1: raid set %s active with %d out of %d mirrors\n",
2062 mdname(mddev
), mddev
->raid_disks
- mddev
->degraded
,
2065 * Ok, everything is just fine now
2067 md_set_array_sectors(mddev
, raid1_size(mddev
, 0, 0));
2069 mddev
->queue
->unplug_fn
= raid1_unplug
;
2070 mddev
->queue
->backing_dev_info
.congested_fn
= raid1_congested
;
2071 mddev
->queue
->backing_dev_info
.congested_data
= mddev
;
2072 md_integrity_register(mddev
);
2076 printk(KERN_ERR
"raid1: couldn't allocate memory for %s\n",
2081 if (conf
->r1bio_pool
)
2082 mempool_destroy(conf
->r1bio_pool
);
2083 kfree(conf
->mirrors
);
2084 safe_put_page(conf
->tmppage
);
2085 kfree(conf
->poolinfo
);
2087 mddev
->private = NULL
;
2093 static int stop(mddev_t
*mddev
)
2095 conf_t
*conf
= mddev
->private;
2096 struct bitmap
*bitmap
= mddev
->bitmap
;
2097 int behind_wait
= 0;
2099 /* wait for behind writes to complete */
2100 while (bitmap
&& atomic_read(&bitmap
->behind_writes
) > 0) {
2102 printk(KERN_INFO
"raid1: behind writes in progress on device %s, waiting to stop (%d)\n", mdname(mddev
), behind_wait
);
2103 set_current_state(TASK_UNINTERRUPTIBLE
);
2104 schedule_timeout(HZ
); /* wait a second */
2105 /* need to kick something here to make sure I/O goes? */
2108 raise_barrier(conf
);
2109 lower_barrier(conf
);
2111 md_unregister_thread(mddev
->thread
);
2112 mddev
->thread
= NULL
;
2113 blk_sync_queue(mddev
->queue
); /* the unplug fn references 'conf'*/
2114 if (conf
->r1bio_pool
)
2115 mempool_destroy(conf
->r1bio_pool
);
2116 kfree(conf
->mirrors
);
2117 kfree(conf
->poolinfo
);
2119 mddev
->private = NULL
;
2123 static int raid1_resize(mddev_t
*mddev
, sector_t sectors
)
2125 /* no resync is happening, and there is enough space
2126 * on all devices, so we can resize.
2127 * We need to make sure resync covers any new space.
2128 * If the array is shrinking we should possibly wait until
2129 * any io in the removed space completes, but it hardly seems
2132 md_set_array_sectors(mddev
, raid1_size(mddev
, sectors
, 0));
2133 if (mddev
->array_sectors
> raid1_size(mddev
, sectors
, 0))
2135 set_capacity(mddev
->gendisk
, mddev
->array_sectors
);
2137 revalidate_disk(mddev
->gendisk
);
2138 if (sectors
> mddev
->dev_sectors
&&
2139 mddev
->recovery_cp
== MaxSector
) {
2140 mddev
->recovery_cp
= mddev
->dev_sectors
;
2141 set_bit(MD_RECOVERY_NEEDED
, &mddev
->recovery
);
2143 mddev
->dev_sectors
= sectors
;
2144 mddev
->resync_max_sectors
= sectors
;
2148 static int raid1_reshape(mddev_t
*mddev
)
2151 * 1/ resize the r1bio_pool
2152 * 2/ resize conf->mirrors
2154 * We allocate a new r1bio_pool if we can.
2155 * Then raise a device barrier and wait until all IO stops.
2156 * Then resize conf->mirrors and swap in the new r1bio pool.
2158 * At the same time, we "pack" the devices so that all the missing
2159 * devices have the higher raid_disk numbers.
2161 mempool_t
*newpool
, *oldpool
;
2162 struct pool_info
*newpoolinfo
;
2163 mirror_info_t
*newmirrors
;
2164 conf_t
*conf
= mddev
->private;
2165 int cnt
, raid_disks
;
2166 unsigned long flags
;
2169 /* Cannot change chunk_size, layout, or level */
2170 if (mddev
->chunk_sectors
!= mddev
->new_chunk_sectors
||
2171 mddev
->layout
!= mddev
->new_layout
||
2172 mddev
->level
!= mddev
->new_level
) {
2173 mddev
->new_chunk_sectors
= mddev
->chunk_sectors
;
2174 mddev
->new_layout
= mddev
->layout
;
2175 mddev
->new_level
= mddev
->level
;
2179 err
= md_allow_write(mddev
);
2183 raid_disks
= mddev
->raid_disks
+ mddev
->delta_disks
;
2185 if (raid_disks
< conf
->raid_disks
) {
2187 for (d
= 0; d
< conf
->raid_disks
; d
++)
2188 if (conf
->mirrors
[d
].rdev
)
2190 if (cnt
> raid_disks
)
2194 newpoolinfo
= kmalloc(sizeof(*newpoolinfo
), GFP_KERNEL
);
2197 newpoolinfo
->mddev
= mddev
;
2198 newpoolinfo
->raid_disks
= raid_disks
;
2200 newpool
= mempool_create(NR_RAID1_BIOS
, r1bio_pool_alloc
,
2201 r1bio_pool_free
, newpoolinfo
);
2206 newmirrors
= kzalloc(sizeof(struct mirror_info
) * raid_disks
, GFP_KERNEL
);
2209 mempool_destroy(newpool
);
2213 raise_barrier(conf
);
2215 /* ok, everything is stopped */
2216 oldpool
= conf
->r1bio_pool
;
2217 conf
->r1bio_pool
= newpool
;
2219 for (d
= d2
= 0; d
< conf
->raid_disks
; d
++) {
2220 mdk_rdev_t
*rdev
= conf
->mirrors
[d
].rdev
;
2221 if (rdev
&& rdev
->raid_disk
!= d2
) {
2223 sprintf(nm
, "rd%d", rdev
->raid_disk
);
2224 sysfs_remove_link(&mddev
->kobj
, nm
);
2225 rdev
->raid_disk
= d2
;
2226 sprintf(nm
, "rd%d", rdev
->raid_disk
);
2227 sysfs_remove_link(&mddev
->kobj
, nm
);
2228 if (sysfs_create_link(&mddev
->kobj
,
2231 "md/raid1: cannot register "
2236 newmirrors
[d2
++].rdev
= rdev
;
2238 kfree(conf
->mirrors
);
2239 conf
->mirrors
= newmirrors
;
2240 kfree(conf
->poolinfo
);
2241 conf
->poolinfo
= newpoolinfo
;
2243 spin_lock_irqsave(&conf
->device_lock
, flags
);
2244 mddev
->degraded
+= (raid_disks
- conf
->raid_disks
);
2245 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
2246 conf
->raid_disks
= mddev
->raid_disks
= raid_disks
;
2247 mddev
->delta_disks
= 0;
2249 conf
->last_used
= 0; /* just make sure it is in-range */
2250 lower_barrier(conf
);
2252 set_bit(MD_RECOVERY_NEEDED
, &mddev
->recovery
);
2253 md_wakeup_thread(mddev
->thread
);
2255 mempool_destroy(oldpool
);
2259 static void raid1_quiesce(mddev_t
*mddev
, int state
)
2261 conf_t
*conf
= mddev
->private;
2265 raise_barrier(conf
);
2268 lower_barrier(conf
);
2274 static struct mdk_personality raid1_personality
=
2278 .owner
= THIS_MODULE
,
2279 .make_request
= make_request
,
2283 .error_handler
= error
,
2284 .hot_add_disk
= raid1_add_disk
,
2285 .hot_remove_disk
= raid1_remove_disk
,
2286 .spare_active
= raid1_spare_active
,
2287 .sync_request
= sync_request
,
2288 .resize
= raid1_resize
,
2290 .check_reshape
= raid1_reshape
,
2291 .quiesce
= raid1_quiesce
,
2294 static int __init
raid_init(void)
2296 return register_md_personality(&raid1_personality
);
2299 static void raid_exit(void)
2301 unregister_md_personality(&raid1_personality
);
2304 module_init(raid_init
);
2305 module_exit(raid_exit
);
2306 MODULE_LICENSE("GPL");
2307 MODULE_ALIAS("md-personality-3"); /* RAID1 */
2308 MODULE_ALIAS("md-raid1");
2309 MODULE_ALIAS("md-level-1");