mtd: nand_base: use __func__ instead of typing names
[linux/fpc-iii.git] / drivers / ssb / sprom.c
blob8943015a3eef2b45794c7b5f250d53c33d24cc76
1 /*
2 * Sonics Silicon Backplane
3 * Common SPROM support routines
5 * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de>
6 * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
7 * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
8 * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
9 * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
11 * Licensed under the GNU/GPL. See COPYING for details.
14 #include "ssb_private.h"
17 static const struct ssb_sprom *fallback_sprom;
20 static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
21 size_t sprom_size_words)
23 int i, pos = 0;
25 for (i = 0; i < sprom_size_words; i++)
26 pos += snprintf(buf + pos, buf_len - pos - 1,
27 "%04X", swab16(sprom[i]) & 0xFFFF);
28 pos += snprintf(buf + pos, buf_len - pos - 1, "\n");
30 return pos + 1;
33 static int hex2sprom(u16 *sprom, const char *dump, size_t len,
34 size_t sprom_size_words)
36 char tmp[5] = { 0 };
37 int cnt = 0;
38 unsigned long parsed;
40 if (len < sprom_size_words * 2)
41 return -EINVAL;
43 while (cnt < sprom_size_words) {
44 memcpy(tmp, dump, 4);
45 dump += 4;
46 parsed = simple_strtoul(tmp, NULL, 16);
47 sprom[cnt++] = swab16((u16)parsed);
50 return 0;
53 /* Common sprom device-attribute show-handler */
54 ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf,
55 int (*sprom_read)(struct ssb_bus *bus, u16 *sprom))
57 u16 *sprom;
58 int err = -ENOMEM;
59 ssize_t count = 0;
60 size_t sprom_size_words = bus->sprom_size;
62 sprom = kcalloc(sprom_size_words, sizeof(u16), GFP_KERNEL);
63 if (!sprom)
64 goto out;
66 /* Use interruptible locking, as the SPROM write might
67 * be holding the lock for several seconds. So allow userspace
68 * to cancel operation. */
69 err = -ERESTARTSYS;
70 if (mutex_lock_interruptible(&bus->sprom_mutex))
71 goto out_kfree;
72 err = sprom_read(bus, sprom);
73 mutex_unlock(&bus->sprom_mutex);
75 if (!err)
76 count = sprom2hex(sprom, buf, PAGE_SIZE, sprom_size_words);
78 out_kfree:
79 kfree(sprom);
80 out:
81 return err ? err : count;
84 /* Common sprom device-attribute store-handler */
85 ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
86 const char *buf, size_t count,
87 int (*sprom_check_crc)(const u16 *sprom, size_t size),
88 int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom))
90 u16 *sprom;
91 int res = 0, err = -ENOMEM;
92 size_t sprom_size_words = bus->sprom_size;
94 sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
95 if (!sprom)
96 goto out;
97 err = hex2sprom(sprom, buf, count, sprom_size_words);
98 if (err) {
99 err = -EINVAL;
100 goto out_kfree;
102 err = sprom_check_crc(sprom, sprom_size_words);
103 if (err) {
104 err = -EINVAL;
105 goto out_kfree;
108 /* Use interruptible locking, as the SPROM write might
109 * be holding the lock for several seconds. So allow userspace
110 * to cancel operation. */
111 err = -ERESTARTSYS;
112 if (mutex_lock_interruptible(&bus->sprom_mutex))
113 goto out_kfree;
114 err = ssb_devices_freeze(bus);
115 if (err == -EOPNOTSUPP) {
116 ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
117 "No suspend support. Is CONFIG_PM enabled?\n");
118 goto out_unlock;
120 if (err) {
121 ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
122 goto out_unlock;
124 res = sprom_write(bus, sprom);
125 err = ssb_devices_thaw(bus);
126 if (err)
127 ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
128 out_unlock:
129 mutex_unlock(&bus->sprom_mutex);
130 out_kfree:
131 kfree(sprom);
132 out:
133 if (res)
134 return res;
135 return err ? err : count;
139 * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
141 * @sprom: The SPROM data structure to register.
143 * With this function the architecture implementation may register a fallback
144 * SPROM data structure. The fallback is only used for PCI based SSB devices,
145 * where no valid SPROM can be found in the shadow registers.
147 * This function is useful for weird architectures that have a half-assed SSB device
148 * hardwired to their PCI bus.
150 * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
151 * don't use this fallback.
152 * Architectures must provide the SPROM for native SSB devices anyway,
153 * so the fallback also isn't used for native devices.
155 * This function is available for architecture code, only. So it is not exported.
157 int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
159 if (fallback_sprom)
160 return -EEXIST;
161 fallback_sprom = sprom;
163 return 0;
166 const struct ssb_sprom *ssb_get_fallback_sprom(void)
168 return fallback_sprom;