drivers/usb/core/hcd-pci.c

   1 /*
   2  * (C) Copyright David Brownell 2000-2002
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/pci.h>
  22 #include <linux/usb.h>
  23
  24 #include <asm/io.h>
  25 #include <asm/irq.h>
  26
  27 #ifdef CONFIG_PPC_PMAC
  28 #include <asm/machdep.h>
  29 #include <asm/pmac_feature.h>
  30 #include <asm/pci-bridge.h>
  31 #include <asm/prom.h>
  32 #endif
  33
  34 #include "usb.h"
  35 #include "hcd.h"
  36
  37
  38 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
  39
  40
  41 /*-------------------------------------------------------------------------*/
  42
  43 /* configure so an HC device and id are always provided */
  44 /* always called with process context; sleeping is OK */
  45
  46 /**
  47  * usb_hcd_pci_probe - initialize PCI-based HCDs
  48  * @dev: USB Host Controller being probed
  49  * @id: pci hotplug id connecting controller to HCD framework
  50  * Context: !in_interrupt()
  51  *
  52  * Allocates basic PCI resources for this USB host controller, and
  53  * then invokes the start() method for the HCD associated with it
  54  * through the hotplug entry's driver_data.
  55  *
  56  * Store this function in the HCD's struct pci_driver as probe().
  57  */
  58 int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
  59 {
  60         struct hc_driver        *driver;
  61         struct usb_hcd          *hcd;
  62         int                     retval;
  63
  64         if (usb_disabled())
  65                 return -ENODEV;
  66
  67         if (!id)
  68                 return -EINVAL;
  69         driver = (struct hc_driver *)id->driver_data;
  70         if (!driver)
  71                 return -EINVAL;
  72
  73         if (pci_enable_device(dev) < 0)
  74                 return -ENODEV;
  75         dev->current_state = PCI_D0;
  76
  77         if (!dev->irq) {
  78                 dev_err(&dev->dev,
  79                         "Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
  80                         pci_name(dev));
  81                 retval = -ENODEV;
  82                 goto err1;
  83         }
  84
  85         hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
  86         if (!hcd) {
  87                 retval = -ENOMEM;
  88                 goto err1;
  89         }
  90
  91         if (driver->flags & HCD_MEMORY) {
  92                 /* EHCI, OHCI */
  93                 hcd->rsrc_start = pci_resource_start(dev, 0);
  94                 hcd->rsrc_len = pci_resource_len(dev, 0);
  95                 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
  96                                 driver->description)) {
  97                         dev_dbg(&dev->dev, "controller already in use\n");
  98                         retval = -EBUSY;
  99                         goto err2;
 100                 }
 101                 hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 102                 if (hcd->regs == NULL) {
 103                         dev_dbg(&dev->dev, "error mapping memory\n");
 104                         retval = -EFAULT;
 105                         goto err3;
 106                 }
 107
 108         } else {
 109                 /* UHCI */
 110                 int     region;
 111
 112                 for (region = 0; region < PCI_ROM_RESOURCE; region++) {
 113                         if (!(pci_resource_flags(dev, region) &
 114                                         IORESOURCE_IO))
 115                                 continue;
 116
 117                         hcd->rsrc_start = pci_resource_start(dev, region);
 118                         hcd->rsrc_len = pci_resource_len(dev, region);
 119                         if (request_region(hcd->rsrc_start, hcd->rsrc_len,
 120                                         driver->description))
 121                                 break;
 122                 }
 123                 if (region == PCI_ROM_RESOURCE) {
 124                         dev_dbg(&dev->dev, "no i/o regions available\n");
 125                         retval = -EBUSY;
 126                         goto err1;
 127                 }
 128         }
 129
 130         pci_set_master(dev);
 131
 132         retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
 133         if (retval != 0)
 134                 goto err4;
 135         return retval;
 136
 137  err4:
 138         if (driver->flags & HCD_MEMORY) {
 139                 iounmap(hcd->regs);
 140  err3:
 141                 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 142         } else
 143                 release_region(hcd->rsrc_start, hcd->rsrc_len);
 144  err2:
 145         usb_put_hcd(hcd);
 146  err1:
 147         pci_disable_device(dev);
 148         dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
 149         return retval;
 150 }
 151 EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
 152
 153
 154 /* may be called without controller electrically present */
 155 /* may be called with controller, bus, and devices active */
 156
 157 /**
 158  * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
 159  * @dev: USB Host Controller being removed
 160  * Context: !in_interrupt()
 161  *
 162  * Reverses the effect of usb_hcd_pci_probe(), first invoking
 163  * the HCD's stop() method.  It is always called from a thread
 164  * context, normally "rmmod", "apmd", or something similar.
 165  *
 166  * Store this function in the HCD's struct pci_driver as remove().
 167  */
 168 void usb_hcd_pci_remove(struct pci_dev *dev)
 169 {
 170         struct usb_hcd          *hcd;
 171
 172         hcd = pci_get_drvdata(dev);
 173         if (!hcd)
 174                 return;
 175
 176         usb_remove_hcd(hcd);
 177         if (hcd->driver->flags & HCD_MEMORY) {
 178                 iounmap(hcd->regs);
 179                 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 180         } else {
 181                 release_region(hcd->rsrc_start, hcd->rsrc_len);
 182         }
 183         usb_put_hcd(hcd);
 184         pci_disable_device(dev);
 185 }
 186 EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
 187
 188 /**
 189  * usb_hcd_pci_shutdown - shutdown host controller
 190  * @dev: USB Host Controller being shutdown
 191  */
 192 void usb_hcd_pci_shutdown(struct pci_dev *dev)
 193 {
 194         struct usb_hcd          *hcd;
 195
 196         hcd = pci_get_drvdata(dev);
 197         if (!hcd)
 198                 return;
 199
 200         if (hcd->driver->shutdown)
 201                 hcd->driver->shutdown(hcd);
 202 }
 203 EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
 204
 205 #ifdef  CONFIG_PM_SLEEP
 206
 207 static int check_root_hub_suspended(struct device *dev)
 208 {
 209         struct pci_dev          *pci_dev = to_pci_dev(dev);
 210         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 211
 212         if (!(hcd->state == HC_STATE_SUSPENDED ||
 213                         hcd->state == HC_STATE_HALT)) {
 214                 dev_warn(dev, "Root hub is not suspended\n");
 215                 return -EBUSY;
 216         }
 217         return 0;
 218 }
 219
 220 static int hcd_pci_suspend(struct device *dev)
 221 {
 222         struct pci_dev          *pci_dev = to_pci_dev(dev);
 223         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 224         int                     retval;
 225
 226         /* Root hub suspend should have stopped all downstream traffic,
 227          * and all bus master traffic.  And done so for both the interface
 228          * and the stub usb_device (which we check here).  But maybe it
 229          * didn't; writing sysfs power/state files ignores such rules...
 230          */
 231         retval = check_root_hub_suspended(dev);
 232         if (retval)
 233                 return retval;
 234
 235         /* We might already be suspended (runtime PM -- not yet written) */
 236         if (pci_dev->current_state != PCI_D0)
 237                 return retval;
 238
 239         if (hcd->driver->pci_suspend) {
 240                 retval = hcd->driver->pci_suspend(hcd);
 241                 suspend_report_result(hcd->driver->pci_suspend, retval);
 242                 if (retval)
 243                         return retval;
 244         }
 245
 246         synchronize_irq(pci_dev->irq);
 247
 248         /* Downstream ports from this root hub should already be quiesced, so
 249          * there will be no DMA activity.  Now we can shut down the upstream
 250          * link (except maybe for PME# resume signaling).  We'll enter a
 251          * low power state during suspend_noirq, if the hardware allows.
 252          */
 253         pci_disable_device(pci_dev);
 254         return retval;
 255 }
 256
 257 static int hcd_pci_suspend_noirq(struct device *dev)
 258 {
 259         struct pci_dev          *pci_dev = to_pci_dev(dev);
 260         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 261         int                     retval;
 262
 263         retval = check_root_hub_suspended(dev);
 264         if (retval)
 265                 return retval;
 266
 267         pci_save_state(pci_dev);
 268
 269         /* If the root hub is HALTed rather than SUSPENDed,
 270          * disallow remote wakeup.
 271          */
 272         if (hcd->state == HC_STATE_HALT)
 273                 device_set_wakeup_enable(dev, 0);
 274         dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
 275
 276         /* Possibly enable remote wakeup,
 277          * choose the appropriate low-power state, and go to that state.
 278          */
 279         retval = pci_prepare_to_sleep(pci_dev);
 280         if (retval == -EIO) {           /* Low-power not supported */
 281                 dev_dbg(dev, "--> PCI D0 legacy\n");
 282                 retval = 0;
 283         } else if (retval == 0) {
 284                 dev_dbg(dev, "--> PCI %s\n",
 285                                 pci_power_name(pci_dev->current_state));
 286         } else {
 287                 suspend_report_result(pci_prepare_to_sleep, retval);
 288                 return retval;
 289         }
 290
 291 #ifdef CONFIG_PPC_PMAC
 292         /* Disable ASIC clocks for USB */
 293         if (machine_is(powermac)) {
 294                 struct device_node      *of_node;
 295
 296                 of_node = pci_device_to_OF_node(pci_dev);
 297                 if (of_node)
 298                         pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
 299         }
 300 #endif
 301         return retval;
 302 }
 303
 304 static int hcd_pci_resume_noirq(struct device *dev)
 305 {
 306         struct pci_dev          *pci_dev = to_pci_dev(dev);
 307
 308 #ifdef CONFIG_PPC_PMAC
 309         /* Reenable ASIC clocks for USB */
 310         if (machine_is(powermac)) {
 311                 struct device_node *of_node;
 312
 313                 of_node = pci_device_to_OF_node(pci_dev);
 314                 if (of_node)
 315                         pmac_call_feature(PMAC_FTR_USB_ENABLE,
 316                                                 of_node, 0, 1);
 317         }
 318 #endif
 319
 320         /* Go back to D0 and disable remote wakeup */
 321         pci_back_from_sleep(pci_dev);
 322         return 0;
 323 }
 324
 325 static int resume_common(struct device *dev, bool hibernated)
 326 {
 327         struct pci_dev          *pci_dev = to_pci_dev(dev);
 328         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 329         int                     retval;
 330
 331         if (hcd->state != HC_STATE_SUSPENDED) {
 332                 dev_dbg(dev, "can't resume, not suspended!\n");
 333                 return 0;
 334         }
 335
 336         retval = pci_enable_device(pci_dev);
 337         if (retval < 0) {
 338                 dev_err(dev, "can't re-enable after resume, %d!\n", retval);
 339                 return retval;
 340         }
 341
 342         pci_set_master(pci_dev);
 343
 344         clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 345
 346         if (hcd->driver->pci_resume) {
 347                 retval = hcd->driver->pci_resume(hcd, hibernated);
 348                 if (retval) {
 349                         dev_err(dev, "PCI post-resume error %d!\n", retval);
 350                         usb_hc_died(hcd);
 351                 }
 352         }
 353         return retval;
 354 }
 355
 356 static int hcd_pci_resume(struct device *dev)
 357 {
 358         return resume_common(dev, false);
 359 }
 360
 361 static int hcd_pci_restore(struct device *dev)
 362 {
 363         return resume_common(dev, true);
 364 }
 365
 366 struct dev_pm_ops usb_hcd_pci_pm_ops = {
 367         .suspend        = hcd_pci_suspend,
 368         .suspend_noirq  = hcd_pci_suspend_noirq,
 369         .resume_noirq   = hcd_pci_resume_noirq,
 370         .resume         = hcd_pci_resume,
 371         .freeze         = check_root_hub_suspended,
 372         .freeze_noirq   = check_root_hub_suspended,
 373         .thaw_noirq     = NULL,
 374         .thaw           = NULL,
 375         .poweroff       = hcd_pci_suspend,
 376         .poweroff_noirq = hcd_pci_suspend_noirq,
 377         .restore_noirq  = hcd_pci_resume_noirq,
 378         .restore        = hcd_pci_restore,
 379 };
 380 EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
 381
 382 #endif  /* CONFIG_PM_SLEEP */