?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL
[linux/fpc-iii.git] / drivers / ata / sata_mv.c
blobbb73b2222627b9b6a05f96057da351c7d417f935
1 /*
2 * sata_mv.c - Marvell SATA support
3 *
4 * Copyright 2008: Marvell Corporation, all rights reserved.
5 * Copyright 2005: EMC Corporation, all rights reserved.
6 * Copyright 2005 Red Hat, Inc. All rights reserved.
7 *
8 * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2 of the License.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 *
23 */
24
25 /*
26 * sata_mv TODO list:
27 *
28 * --> Errata workaround for NCQ device errors.
29 *
30 * --> More errata workarounds for PCI-X.
31 *
32 * --> Complete a full errata audit for all chipsets to identify others.
33 *
34 * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
35 *
36 * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
37 *
38 * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
39 *
40 * --> Develop a low-power-consumption strategy, and implement it.
41 *
42 * --> [Experiment, low priority] Investigate interrupt coalescing.
43 * Quite often, especially with PCI Message Signalled Interrupts (MSI),
44 * the overhead reduced by interrupt mitigation is quite often not
45 * worth the latency cost.
46 *
47 * --> [Experiment, Marvell value added] Is it possible to use target
48 * mode to cross-connect two Linux boxes with Marvell cards? If so,
49 * creating LibATA target mode support would be very interesting.
50 *
51 * Target mode, for those without docs, is the ability to directly
52 * connect two SATA ports.
53 */
54
55 #include <linux/kernel.h>
56 #include <linux/module.h>
57 #include <linux/pci.h>
58 #include <linux/init.h>
59 #include <linux/blkdev.h>
60 #include <linux/delay.h>
61 #include <linux/interrupt.h>
62 #include <linux/dmapool.h>
63 #include <linux/dma-mapping.h>
64 #include <linux/device.h>
65 #include <linux/platform_device.h>
66 #include <linux/ata_platform.h>
67 #include <linux/mbus.h>
68 #include <linux/bitops.h>
69 #include <scsi/scsi_host.h>
70 #include <scsi/scsi_cmnd.h>
71 #include <scsi/scsi_device.h>
72 #include <linux/libata.h>
73
74 #define DRV_NAME "sata_mv"
75 #define DRV_VERSION "1.20"
76
77 enum {
78 /* BAR's are enumerated in terms of pci_resource_start() terms */
79 MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */
80 MV_IO_BAR = 2, /* offset 0x18: IO space */
81 MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */
82
83 MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */
84 MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */
85
86 MV_PCI_REG_BASE = 0,
87 MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */
88 MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08),
89 MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88),
90 MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c),
91 MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc),
92 MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0),
93
94 MV_SATAHC0_REG_BASE = 0x20000,
95 MV_FLASH_CTL_OFS = 0x1046c,
96 MV_GPIO_PORT_CTL_OFS = 0x104f0,
97 MV_RESET_CFG_OFS = 0x180d8,
98
99 MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ,
100 MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ,
101 MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
102 MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
103
104 MV_MAX_Q_DEPTH = 32,
105 MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
106
107 /* CRQB needs alignment on a 1KB boundary. Size == 1KB
108 * CRPB needs alignment on a 256B boundary. Size == 256B
109 * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
110 */
111 MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
112 MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
113 MV_MAX_SG_CT = 256,
114 MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
115
116 /* Determine hc from 0-7 port: hc = port >> MV_PORT_HC_SHIFT */
117 MV_PORT_HC_SHIFT = 2,
118 MV_PORTS_PER_HC = (1 << MV_PORT_HC_SHIFT), /* 4 */
119 /* Determine hc port from 0-7 port: hardport = port & MV_PORT_MASK */
120 MV_PORT_MASK = (MV_PORTS_PER_HC - 1), /* 3 */
121
122 /* Host Flags */
123 MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
124 MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
125 /* SoC integrated controllers, no PCI interface */
126 MV_FLAG_SOC = (1 << 28),
127
128 MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
129 ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
130 ATA_FLAG_PIO_POLLING,
131 MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
132
133 CRQB_FLAG_READ = (1 << 0),
134 CRQB_TAG_SHIFT = 1,
135 CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
136 CRQB_PMP_SHIFT = 12, /* CRQB Gen-II/IIE PMP shift */
137 CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */
138 CRQB_CMD_ADDR_SHIFT = 8,
139 CRQB_CMD_CS = (0x2 << 11),
140 CRQB_CMD_LAST = (1 << 15),
141
142 CRPB_FLAG_STATUS_SHIFT = 8,
143 CRPB_IOID_SHIFT_6 = 5, /* CRPB Gen-II IO Id shift */
144 CRPB_IOID_SHIFT_7 = 7, /* CRPB Gen-IIE IO Id shift */
145
146 EPRD_FLAG_END_OF_TBL = (1 << 31),
147
148 /* PCI interface registers */
149
150 PCI_COMMAND_OFS = 0xc00,
151 PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */
152
153 PCI_MAIN_CMD_STS_OFS = 0xd30,
154 STOP_PCI_MASTER = (1 << 2),
155 PCI_MASTER_EMPTY = (1 << 3),
156 GLOB_SFT_RST = (1 << 4),
157
158 MV_PCI_MODE_OFS = 0xd00,
159 MV_PCI_MODE_MASK = 0x30,
160
161 MV_PCI_EXP_ROM_BAR_CTL = 0xd2c,
162 MV_PCI_DISC_TIMER = 0xd04,
163 MV_PCI_MSI_TRIGGER = 0xc38,
164 MV_PCI_SERR_MASK = 0xc28,
165 MV_PCI_XBAR_TMOUT_OFS = 0x1d04,
166 MV_PCI_ERR_LOW_ADDRESS = 0x1d40,
167 MV_PCI_ERR_HIGH_ADDRESS = 0x1d44,
168 MV_PCI_ERR_ATTRIBUTE = 0x1d48,
169 MV_PCI_ERR_COMMAND = 0x1d50,
170
171 PCI_IRQ_CAUSE_OFS = 0x1d58,
172 PCI_IRQ_MASK_OFS = 0x1d5c,
173 PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */
174
175 PCIE_IRQ_CAUSE_OFS = 0x1900,
176 PCIE_IRQ_MASK_OFS = 0x1910,
177 PCIE_UNMASK_ALL_IRQS = 0x40a, /* assorted bits */
178
179 /* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */
180 PCI_HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
181 PCI_HC_MAIN_IRQ_MASK_OFS = 0x1d64,
182 SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020,
183 SOC_HC_MAIN_IRQ_MASK_OFS = 0x20024,
184 ERR_IRQ = (1 << 0), /* shift by port # */
185 DONE_IRQ = (1 << 1), /* shift by port # */
186 HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */
187 HC_SHIFT = 9, /* bits 9-17 = HC1's ports */
188 PCI_ERR = (1 << 18),
189 TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */
190 TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */
191 PORTS_0_3_COAL_DONE = (1 << 8),
192 PORTS_4_7_COAL_DONE = (1 << 17),
193 PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */
194 GPIO_INT = (1 << 22),
195 SELF_INT = (1 << 23),
196 TWSI_INT = (1 << 24),
197 HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
198 HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
199 HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
200 HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
201 PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
202 PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
203 HC_MAIN_RSVD),
204 HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
205 HC_MAIN_RSVD_5),
206 HC_MAIN_MASKED_IRQS_SOC = (PORTS_0_3_COAL_DONE | HC_MAIN_RSVD_SOC),
207
208 /* SATAHC registers */
209 HC_CFG_OFS = 0,
210
211 HC_IRQ_CAUSE_OFS = 0x14,
212 DMA_IRQ = (1 << 0), /* shift by port # */
213 HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */
214 DEV_IRQ = (1 << 8), /* shift by port # */
215
216 /* Shadow block registers */
217 SHD_BLK_OFS = 0x100,
218 SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */
219
220 /* SATA registers */
221 SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
222 SATA_ACTIVE_OFS = 0x350,
223 SATA_FIS_IRQ_CAUSE_OFS = 0x364,
224
225 LTMODE_OFS = 0x30c,
226 LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */
227
228 PHY_MODE3 = 0x310,
229 PHY_MODE4 = 0x314,
230 PHY_MODE2 = 0x330,
231 SATA_IFCTL_OFS = 0x344,
232 SATA_TESTCTL_OFS = 0x348,
233 SATA_IFSTAT_OFS = 0x34c,
234 VENDOR_UNIQUE_FIS_OFS = 0x35c,
235
236 FISCFG_OFS = 0x360,
237 FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
238 FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
239
240 MV5_PHY_MODE = 0x74,
241 MV5_LTMODE_OFS = 0x30,
242 MV5_PHY_CTL_OFS = 0x0C,
243 SATA_INTERFACE_CFG_OFS = 0x050,
244
245 MV_M2_PREAMP_MASK = 0x7e0,
246
247 /* Port registers */
248 EDMA_CFG_OFS = 0,
249 EDMA_CFG_Q_DEPTH = 0x1f, /* max device queue depth */
250 EDMA_CFG_NCQ = (1 << 5), /* for R/W FPDMA queued */
251 EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
252 EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
253 EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
254 EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */
255 EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */
256
257 EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
258 EDMA_ERR_IRQ_MASK_OFS = 0xc,
259 EDMA_ERR_D_PAR = (1 << 0), /* UDMA data parity err */
260 EDMA_ERR_PRD_PAR = (1 << 1), /* UDMA PRD parity err */
261 EDMA_ERR_DEV = (1 << 2), /* device error */
262 EDMA_ERR_DEV_DCON = (1 << 3), /* device disconnect */
263 EDMA_ERR_DEV_CON = (1 << 4), /* device connected */
264 EDMA_ERR_SERR = (1 << 5), /* SError bits [WBDST] raised */
265 EDMA_ERR_SELF_DIS = (1 << 7), /* Gen II/IIE self-disable */
266 EDMA_ERR_SELF_DIS_5 = (1 << 8), /* Gen I self-disable */
267 EDMA_ERR_BIST_ASYNC = (1 << 8), /* BIST FIS or Async Notify */
268 EDMA_ERR_TRANS_IRQ_7 = (1 << 8), /* Gen IIE transprt layer irq */
269 EDMA_ERR_CRQB_PAR = (1 << 9), /* CRQB parity error */
270 EDMA_ERR_CRPB_PAR = (1 << 10), /* CRPB parity error */
271 EDMA_ERR_INTRL_PAR = (1 << 11), /* internal parity error */
272 EDMA_ERR_IORDY = (1 << 12), /* IORdy timeout */
273
274 EDMA_ERR_LNK_CTRL_RX = (0xf << 13), /* link ctrl rx error */
275 EDMA_ERR_LNK_CTRL_RX_0 = (1 << 13), /* transient: CRC err */
276 EDMA_ERR_LNK_CTRL_RX_1 = (1 << 14), /* transient: FIFO err */
277 EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), /* fatal: caught SYNC */
278 EDMA_ERR_LNK_CTRL_RX_3 = (1 << 16), /* transient: FIS rx err */
279
280 EDMA_ERR_LNK_DATA_RX = (0xf << 17), /* link data rx error */
281
282 EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), /* link ctrl tx error */
283 EDMA_ERR_LNK_CTRL_TX_0 = (1 << 21), /* transient: CRC err */
284 EDMA_ERR_LNK_CTRL_TX_1 = (1 << 22), /* transient: FIFO err */
285 EDMA_ERR_LNK_CTRL_TX_2 = (1 << 23), /* transient: caught SYNC */
286 EDMA_ERR_LNK_CTRL_TX_3 = (1 << 24), /* transient: caught DMAT */
287 EDMA_ERR_LNK_CTRL_TX_4 = (1 << 25), /* transient: FIS collision */
288
289 EDMA_ERR_LNK_DATA_TX = (0x1f << 26), /* link data tx error */
290
291 EDMA_ERR_TRANS_PROTO = (1 << 31), /* transport protocol error */
292 EDMA_ERR_OVERRUN_5 = (1 << 5),
293 EDMA_ERR_UNDERRUN_5 = (1 << 6),
294
295 EDMA_ERR_IRQ_TRANSIENT = EDMA_ERR_LNK_CTRL_RX_0 |
296 EDMA_ERR_LNK_CTRL_RX_1 |
297 EDMA_ERR_LNK_CTRL_RX_3 |
298 EDMA_ERR_LNK_CTRL_TX,
299
300 EDMA_EH_FREEZE = EDMA_ERR_D_PAR |
301 EDMA_ERR_PRD_PAR |
302 EDMA_ERR_DEV_DCON |
303 EDMA_ERR_DEV_CON |
304 EDMA_ERR_SERR |
305 EDMA_ERR_SELF_DIS |
306 EDMA_ERR_CRQB_PAR |
307 EDMA_ERR_CRPB_PAR |
308 EDMA_ERR_INTRL_PAR |
309 EDMA_ERR_IORDY |
310 EDMA_ERR_LNK_CTRL_RX_2 |
311 EDMA_ERR_LNK_DATA_RX |
312 EDMA_ERR_LNK_DATA_TX |
313 EDMA_ERR_TRANS_PROTO,
314
315 EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR |
316 EDMA_ERR_PRD_PAR |
317 EDMA_ERR_DEV_DCON |
318 EDMA_ERR_DEV_CON |
319 EDMA_ERR_OVERRUN_5 |
320 EDMA_ERR_UNDERRUN_5 |
321 EDMA_ERR_SELF_DIS_5 |
322 EDMA_ERR_CRQB_PAR |
323 EDMA_ERR_CRPB_PAR |
324 EDMA_ERR_INTRL_PAR |
325 EDMA_ERR_IORDY,
326
327 EDMA_REQ_Q_BASE_HI_OFS = 0x10,
328 EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
329
330 EDMA_REQ_Q_OUT_PTR_OFS = 0x18,
331 EDMA_REQ_Q_PTR_SHIFT = 5,
332
333 EDMA_RSP_Q_BASE_HI_OFS = 0x1c,
334 EDMA_RSP_Q_IN_PTR_OFS = 0x20,
335 EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */
336 EDMA_RSP_Q_PTR_SHIFT = 3,
337
338 EDMA_CMD_OFS = 0x28, /* EDMA command register */
339 EDMA_EN = (1 << 0), /* enable EDMA */
340 EDMA_DS = (1 << 1), /* disable EDMA; self-negated */
341 EDMA_RESET = (1 << 2), /* reset eng/trans/link/phy */
342
343 EDMA_STATUS_OFS = 0x30, /* EDMA engine status */
344 EDMA_STATUS_CACHE_EMPTY = (1 << 6), /* GenIIe command cache empty */
345 EDMA_STATUS_IDLE = (1 << 7), /* GenIIe EDMA enabled/idle */
346
347 EDMA_IORDY_TMOUT_OFS = 0x34,
348 EDMA_ARB_CFG_OFS = 0x38,
349
350 EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
351
352 GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */
353
354 /* Host private flags (hp_flags) */
355 MV_HP_FLAG_MSI = (1 << 0),
356 MV_HP_ERRATA_50XXB0 = (1 << 1),
357 MV_HP_ERRATA_50XXB2 = (1 << 2),
358 MV_HP_ERRATA_60X1B2 = (1 << 3),
359 MV_HP_ERRATA_60X1C0 = (1 << 4),
360 MV_HP_ERRATA_XX42A0 = (1 << 5),
361 MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
362 MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
363 MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
364 MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
365 MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
366
367 /* Port private flags (pp_flags) */
368 MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
369 MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
370 MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */
371 MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */
372 };
373
374 #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
375 #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
376 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
377 #define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
378 #define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
379
380 #define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
381 #define WINDOW_BASE(i) (0x20034 + ((i) << 4))
382
383 enum {
384 /* DMA boundary 0xffff is required by the s/g splitting
385 * we need on /length/ in mv_fill-sg().
386 */
387 MV_DMA_BOUNDARY = 0xffffU,
388
389 /* mask of register bits containing lower 32 bits
390 * of EDMA request queue DMA address
391 */
392 EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
393
394 /* ditto, for response queue */
395 EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
396 };
397
398 enum chip_type {
399 chip_504x,
400 chip_508x,
401 chip_5080,
402 chip_604x,
403 chip_608x,
404 chip_6042,
405 chip_7042,
406 chip_soc,
407 };
408
409 /* Command ReQuest Block: 32B */
410 struct mv_crqb {
411 __le32 sg_addr;
412 __le32 sg_addr_hi;
413 __le16 ctrl_flags;
414 __le16 ata_cmd[11];
415 };
416
417 struct mv_crqb_iie {
418 __le32 addr;
419 __le32 addr_hi;
420 __le32 flags;
421 __le32 len;
422 __le32 ata_cmd[4];
423 };
424
425 /* Command ResPonse Block: 8B */
426 struct mv_crpb {
427 __le16 id;
428 __le16 flags;
429 __le32 tmstmp;
430 };
431
432 /* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */
433 struct mv_sg {
434 __le32 addr;
435 __le32 flags_size;
436 __le32 addr_hi;
437 __le32 reserved;
438 };
439
440 struct mv_port_priv {
441 struct mv_crqb *crqb;
442 dma_addr_t crqb_dma;
443 struct mv_crpb *crpb;
444 dma_addr_t crpb_dma;
445 struct mv_sg *sg_tbl[MV_MAX_Q_DEPTH];
446 dma_addr_t sg_tbl_dma[MV_MAX_Q_DEPTH];
447
448 unsigned int req_idx;
449 unsigned int resp_idx;
450
451 u32 pp_flags;
452 unsigned int delayed_eh_pmp_map;
453 };
454
455 struct mv_port_signal {
456 u32 amps;
457 u32 pre;
458 };
459
460 struct mv_host_priv {
461 u32 hp_flags;
462 struct mv_port_signal signal[8];
463 const struct mv_hw_ops *ops;
464 int n_ports;
465 void __iomem *base;
466 void __iomem *main_irq_cause_addr;
467 void __iomem *main_irq_mask_addr;
468 u32 irq_cause_ofs;
469 u32 irq_mask_ofs;
470 u32 unmask_all_irqs;
471 /*
472 * These consistent DMA memory pools give us guaranteed
473 * alignment for hardware-accessed data structures,
474 * and less memory waste in accomplishing the alignment.
475 */
476 struct dma_pool *crqb_pool;
477 struct dma_pool *crpb_pool;
478 struct dma_pool *sg_tbl_pool;
479 };
480
481 struct mv_hw_ops {
482 void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio,
483 unsigned int port);
484 void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio);
485 void (*read_preamp)(struct mv_host_priv *hpriv, int idx,
486 void __iomem *mmio);
487 int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio,
488 unsigned int n_hc);
489 void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio);
490 void (*reset_bus)(struct ata_host *host, void __iomem *mmio);
491 };
492
493 static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
494 static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
495 static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
496 static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
497 static int mv_port_start(struct ata_port *ap);
498 static void mv_port_stop(struct ata_port *ap);
499 static int mv_qc_defer(struct ata_queued_cmd *qc);
500 static void mv_qc_prep(struct ata_queued_cmd *qc);
501 static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
502 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
503 static int mv_hardreset(struct ata_link *link, unsigned int *class,
504 unsigned long deadline);
505 static void mv_eh_freeze(struct ata_port *ap);
506 static void mv_eh_thaw(struct ata_port *ap);
507 static void mv6_dev_config(struct ata_device *dev);
508
509 static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
510 unsigned int port);
511 static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
512 static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
513 void __iomem *mmio);
514 static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
515 unsigned int n_hc);
516 static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
517 static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio);
518
519 static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
520 unsigned int port);
521 static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
522 static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
523 void __iomem *mmio);
524 static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
525 unsigned int n_hc);
526 static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
527 static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
528 void __iomem *mmio);
529 static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
530 void __iomem *mmio);
531 static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
532 void __iomem *mmio, unsigned int n_hc);
533 static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
534 void __iomem *mmio);
535 static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
536 static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
537 static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
538 unsigned int port_no);
539 static int mv_stop_edma(struct ata_port *ap);
540 static int mv_stop_edma_engine(void __iomem *port_mmio);
541 static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
542
543 static void mv_pmp_select(struct ata_port *ap, int pmp);
544 static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
545 unsigned long deadline);
546 static int mv_softreset(struct ata_link *link, unsigned int *class,
547 unsigned long deadline);
548 static void mv_pmp_error_handler(struct ata_port *ap);
549 static void mv_process_crpb_entries(struct ata_port *ap,
550 struct mv_port_priv *pp);
551
552 /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
553 * because we have to allow room for worst case splitting of
554 * PRDs for 64K boundaries in mv_fill_sg().
555 */
556 static struct scsi_host_template mv5_sht = {
557 ATA_BASE_SHT(DRV_NAME),
558 .sg_tablesize = MV_MAX_SG_CT / 2,
559 .dma_boundary = MV_DMA_BOUNDARY,
560 };
561
562 static struct scsi_host_template mv6_sht = {
563 ATA_NCQ_SHT(DRV_NAME),
564 .can_queue = MV_MAX_Q_DEPTH - 1,
565 .sg_tablesize = MV_MAX_SG_CT / 2,
566 .dma_boundary = MV_DMA_BOUNDARY,
567 };
568
569 static struct ata_port_operations mv5_ops = {
570 .inherits = &ata_sff_port_ops,
571
572 .qc_defer = mv_qc_defer,
573 .qc_prep = mv_qc_prep,
574 .qc_issue = mv_qc_issue,
575
576 .freeze = mv_eh_freeze,
577 .thaw = mv_eh_thaw,
578 .hardreset = mv_hardreset,
579 .error_handler = ata_std_error_handler, /* avoid SFF EH */
580 .post_internal_cmd = ATA_OP_NULL,
581
582 .scr_read = mv5_scr_read,
583 .scr_write = mv5_scr_write,
584
585 .port_start = mv_port_start,
586 .port_stop = mv_port_stop,
587 };
588
589 static struct ata_port_operations mv6_ops = {
590 .inherits = &mv5_ops,
591 .dev_config = mv6_dev_config,
592 .scr_read = mv_scr_read,
593 .scr_write = mv_scr_write,
594
595 .pmp_hardreset = mv_pmp_hardreset,
596 .pmp_softreset = mv_softreset,
597 .softreset = mv_softreset,
598 .error_handler = mv_pmp_error_handler,
599 };
600
601 static struct ata_port_operations mv_iie_ops = {
602 .inherits = &mv6_ops,
603 .dev_config = ATA_OP_NULL,
604 .qc_prep = mv_qc_prep_iie,
605 };
606
607 static const struct ata_port_info mv_port_info[] = {
608 { /* chip_504x */
609 .flags = MV_COMMON_FLAGS,
610 .pio_mask = 0x1f, /* pio0-4 */
611 .udma_mask = ATA_UDMA6,
612 .port_ops = &mv5_ops,
613 },
614 { /* chip_508x */
615 .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
616 .pio_mask = 0x1f, /* pio0-4 */
617 .udma_mask = ATA_UDMA6,
618 .port_ops = &mv5_ops,
619 },
620 { /* chip_5080 */
621 .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
622 .pio_mask = 0x1f, /* pio0-4 */
623 .udma_mask = ATA_UDMA6,
624 .port_ops = &mv5_ops,
625 },
626 { /* chip_604x */
627 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
628 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
629 ATA_FLAG_NCQ,
630 .pio_mask = 0x1f, /* pio0-4 */
631 .udma_mask = ATA_UDMA6,
632 .port_ops = &mv6_ops,
633 },
634 { /* chip_608x */
635 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
636 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
637 ATA_FLAG_NCQ | MV_FLAG_DUAL_HC,
638 .pio_mask = 0x1f, /* pio0-4 */
639 .udma_mask = ATA_UDMA6,
640 .port_ops = &mv6_ops,
641 },
642 { /* chip_6042 */
643 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
644 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
645 ATA_FLAG_NCQ,
646 .pio_mask = 0x1f, /* pio0-4 */
647 .udma_mask = ATA_UDMA6,
648 .port_ops = &mv_iie_ops,
649 },
650 { /* chip_7042 */
651 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
652 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
653 ATA_FLAG_NCQ,
654 .pio_mask = 0x1f, /* pio0-4 */
655 .udma_mask = ATA_UDMA6,
656 .port_ops = &mv_iie_ops,
657 },
658 { /* chip_soc */
659 .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
660 ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
661 ATA_FLAG_NCQ | MV_FLAG_SOC,
662 .pio_mask = 0x1f, /* pio0-4 */
663 .udma_mask = ATA_UDMA6,
664 .port_ops = &mv_iie_ops,
665 },
666 };
667
668 static const struct pci_device_id mv_pci_tbl[] = {
669 { PCI_VDEVICE(MARVELL, 0x5040), chip_504x },
670 { PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
671 { PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
672 { PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
673 /* RocketRAID 1740/174x have different identifiers */
674 { PCI_VDEVICE(TTI, 0x1740), chip_508x },
675 { PCI_VDEVICE(TTI, 0x1742), chip_508x },
676
677 { PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
678 { PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
679 { PCI_VDEVICE(MARVELL, 0x6042), chip_6042 },
680 { PCI_VDEVICE(MARVELL, 0x6080), chip_608x },
681 { PCI_VDEVICE(MARVELL, 0x6081), chip_608x },
682
683 { PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
684
685 /* Adaptec 1430SA */
686 { PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
687
688 /* Marvell 7042 support */
689 { PCI_VDEVICE(MARVELL, 0x7042), chip_7042 },
690
691 /* Highpoint RocketRAID PCIe series */
692 { PCI_VDEVICE(TTI, 0x2300), chip_7042 },
693 { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
694
695 { } /* terminate list */
696 };
697
698 static const struct mv_hw_ops mv5xxx_ops = {
699 .phy_errata = mv5_phy_errata,
700 .enable_leds = mv5_enable_leds,
701 .read_preamp = mv5_read_preamp,
702 .reset_hc = mv5_reset_hc,
703 .reset_flash = mv5_reset_flash,
704 .reset_bus = mv5_reset_bus,
705 };
706
707 static const struct mv_hw_ops mv6xxx_ops = {
708 .phy_errata = mv6_phy_errata,
709 .enable_leds = mv6_enable_leds,
710 .read_preamp = mv6_read_preamp,
711 .reset_hc = mv6_reset_hc,
712 .reset_flash = mv6_reset_flash,
713 .reset_bus = mv_reset_pci_bus,
714 };
715
716 static const struct mv_hw_ops mv_soc_ops = {
717 .phy_errata = mv6_phy_errata,
718 .enable_leds = mv_soc_enable_leds,
719 .read_preamp = mv_soc_read_preamp,
720 .reset_hc = mv_soc_reset_hc,
721 .reset_flash = mv_soc_reset_flash,
722 .reset_bus = mv_soc_reset_bus,
723 };
724
725 /*
726 * Functions
727 */
728
729 static inline void writelfl(unsigned long data, void __iomem *addr)
730 {
731 writel(data, addr);
732 (void) readl(addr); /* flush to avoid PCI posted write */
733 }
734
735 static inline unsigned int mv_hc_from_port(unsigned int port)
736 {
737 return port >> MV_PORT_HC_SHIFT;
738 }
739
740 static inline unsigned int mv_hardport_from_port(unsigned int port)
741 {
742 return port & MV_PORT_MASK;
743 }
744
745 /*
746 * Consolidate some rather tricky bit shift calculations.
747 * This is hot-path stuff, so not a function.
748 * Simple code, with two return values, so macro rather than inline.
749 *
750 * port is the sole input, in range 0..7.
751 * shift is one output, for use with main_irq_cause / main_irq_mask registers.
752 * hardport is the other output, in range 0..3.
753 *
754 * Note that port and hardport may be the same variable in some cases.
755 */
756 #define MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport) \
757 { \
758 shift = mv_hc_from_port(port) * HC_SHIFT; \
759 hardport = mv_hardport_from_port(port); \
760 shift += hardport * 2; \
761 }
762
763 static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
764 {
765 return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
766 }
767
768 static inline void __iomem *mv_hc_base_from_port(void __iomem *base,
769 unsigned int port)
770 {
771 return mv_hc_base(base, mv_hc_from_port(port));
772 }
773
774 static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port)
775 {
776 return mv_hc_base_from_port(base, port) +
777 MV_SATAHC_ARBTR_REG_SZ +
778 (mv_hardport_from_port(port) * MV_PORT_REG_SZ);
779 }
780
781 static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
782 {
783 void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
784 unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
785
786 return hc_mmio + ofs;
787 }
788
789 static inline void __iomem *mv_host_base(struct ata_host *host)
790 {
791 struct mv_host_priv *hpriv = host->private_data;
792 return hpriv->base;
793 }
794
795 static inline void __iomem *mv_ap_base(struct ata_port *ap)
796 {
797 return mv_port_base(mv_host_base(ap->host), ap->port_no);
798 }
799
800 static inline int mv_get_hc_count(unsigned long port_flags)
801 {
802 return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
803 }
804
805 static void mv_set_edma_ptrs(void __iomem *port_mmio,
806 struct mv_host_priv *hpriv,
807 struct mv_port_priv *pp)
808 {
809 u32 index;
810
811 /*
812 * initialize request queue
813 */
814 pp->req_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
815 index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
816
817 WARN_ON(pp->crqb_dma & 0x3ff);
818 writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
819 writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
820 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
821
822 if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
823 writelfl((pp->crqb_dma & 0xffffffff) | index,
824 port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
825 else
826 writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
827
828 /*
829 * initialize response queue
830 */
831 pp->resp_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
832 index = pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT;
833
834 WARN_ON(pp->crpb_dma & 0xff);
835 writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
836
837 if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
838 writelfl((pp->crpb_dma & 0xffffffff) | index,
839 port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
840 else
841 writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
842
843 writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
844 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
845 }
846
847 /**
848 * mv_start_dma - Enable eDMA engine
849 * @base: port base address
850 * @pp: port private data
851 *
852 * Verify the local cache of the eDMA state is accurate with a
853 * WARN_ON.
854 *
855 * LOCKING:
856 * Inherited from caller.
857 */
858 static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
859 struct mv_port_priv *pp, u8 protocol)
860 {
861 int want_ncq = (protocol == ATA_PROT_NCQ);
862
863 if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
864 int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
865 if (want_ncq != using_ncq)
866 mv_stop_edma(ap);
867 }
868 if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
869 struct mv_host_priv *hpriv = ap->host->private_data;
870 int hardport = mv_hardport_from_port(ap->port_no);
871 void __iomem *hc_mmio = mv_hc_base_from_port(
872 mv_host_base(ap->host), hardport);
873 u32 hc_irq_cause, ipending;
874
875 /* clear EDMA event indicators, if any */
876 writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
877
878 /* clear EDMA interrupt indicator, if any */
879 hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
880 ipending = (DEV_IRQ | DMA_IRQ) << hardport;
881 if (hc_irq_cause & ipending) {
882 writelfl(hc_irq_cause & ~ipending,
883 hc_mmio + HC_IRQ_CAUSE_OFS);
884 }
885
886 mv_edma_cfg(ap, want_ncq);
887
888 /* clear FIS IRQ Cause */
889 writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
890
891 mv_set_edma_ptrs(port_mmio, hpriv, pp);
892
893 writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS);
894 pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
895 }
896 }
897
898 static void mv_wait_for_edma_empty_idle(struct ata_port *ap)
899 {
900 void __iomem *port_mmio = mv_ap_base(ap);
901 const u32 empty_idle = (EDMA_STATUS_CACHE_EMPTY | EDMA_STATUS_IDLE);
902 const int per_loop = 5, timeout = (15 * 1000 / per_loop);
903 int i;
904
905 /*
906 * Wait for the EDMA engine to finish transactions in progress.
907 * No idea what a good "timeout" value might be, but measurements
908 * indicate that it often requires hundreds of microseconds
909 * with two drives in-use. So we use the 15msec value above
910 * as a rough guess at what even more drives might require.
911 */
912 for (i = 0; i < timeout; ++i) {
913 u32 edma_stat = readl(port_mmio + EDMA_STATUS_OFS);
914 if ((edma_stat & empty_idle) == empty_idle)
915 break;
916 udelay(per_loop);
917 }
918 /* ata_port_printk(ap, KERN_INFO, "%s: %u+ usecs\n", __func__, i); */
919 }
920
921 /**
922 * mv_stop_edma_engine - Disable eDMA engine
923 * @port_mmio: io base address
924 *
925 * LOCKING:
926 * Inherited from caller.
927 */
928 static int mv_stop_edma_engine(void __iomem *port_mmio)
929 {
930 int i;
931
932 /* Disable eDMA. The disable bit auto clears. */
933 writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
934
935 /* Wait for the chip to confirm eDMA is off. */
936 for (i = 10000; i > 0; i--) {
937 u32 reg = readl(port_mmio + EDMA_CMD_OFS);
938 if (!(reg & EDMA_EN))
939 return 0;
940 udelay(10);
941 }
942 return -EIO;
943 }
944
945 static int mv_stop_edma(struct ata_port *ap)
946 {
947 void __iomem *port_mmio = mv_ap_base(ap);
948 struct mv_port_priv *pp = ap->private_data;
949
950 if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
951 return 0;
952 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
953 mv_wait_for_edma_empty_idle(ap);
954 if (mv_stop_edma_engine(port_mmio)) {
955 ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
956 return -EIO;
957 }
958 return 0;
959 }
960
961 #ifdef ATA_DEBUG
962 static void mv_dump_mem(void __iomem *start, unsigned bytes)
963 {
964 int b, w;
965 for (b = 0; b < bytes; ) {
966 DPRINTK("%p: ", start + b);
967 for (w = 0; b < bytes && w < 4; w++) {
968 printk("%08x ", readl(start + b));
969 b += sizeof(u32);
970 }
971 printk("\n");
972 }
973 }
974 #endif
975
976 static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
977 {
978 #ifdef ATA_DEBUG
979 int b, w;
980 u32 dw;
981 for (b = 0; b < bytes; ) {
982 DPRINTK("%02x: ", b);
983 for (w = 0; b < bytes && w < 4; w++) {
984 (void) pci_read_config_dword(pdev, b, &dw);
985 printk("%08x ", dw);
986 b += sizeof(u32);
987 }
988 printk("\n");
989 }
990 #endif
991 }
992 static void mv_dump_all_regs(void __iomem *mmio_base, int port,
993 struct pci_dev *pdev)
994 {
995 #ifdef ATA_DEBUG
996 void __iomem *hc_base = mv_hc_base(mmio_base,
997 port >> MV_PORT_HC_SHIFT);
998 void __iomem *port_base;
999 int start_port, num_ports, p, start_hc, num_hcs, hc;
1000
1001 if (0 > port) {
1002 start_hc = start_port = 0;
1003 num_ports = 8; /* shld be benign for 4 port devs */
1004 num_hcs = 2;
1005 } else {
1006 start_hc = port >> MV_PORT_HC_SHIFT;
1007 start_port = port;
1008 num_ports = num_hcs = 1;
1009 }
1010 DPRINTK("All registers for port(s) %u-%u:\n", start_port,
1011 num_ports > 1 ? num_ports - 1 : start_port);
1012
1013 if (NULL != pdev) {
1014 DPRINTK("PCI config space regs:\n");
1015 mv_dump_pci_cfg(pdev, 0x68);
1016 }
1017 DPRINTK("PCI regs:\n");
1018 mv_dump_mem(mmio_base+0xc00, 0x3c);
1019 mv_dump_mem(mmio_base+0xd00, 0x34);
1020 mv_dump_mem(mmio_base+0xf00, 0x4);
1021 mv_dump_mem(mmio_base+0x1d00, 0x6c);
1022 for (hc = start_hc; hc < start_hc + num_hcs; hc++) {
1023 hc_base = mv_hc_base(mmio_base, hc);
1024 DPRINTK("HC regs (HC %i):\n", hc);
1025 mv_dump_mem(hc_base, 0x1c);
1026 }
1027 for (p = start_port; p < start_port + num_ports; p++) {
1028 port_base = mv_port_base(mmio_base, p);
1029 DPRINTK("EDMA regs (port %i):\n", p);
1030 mv_dump_mem(port_base, 0x54);
1031 DPRINTK("SATA regs (port %i):\n", p);
1032 mv_dump_mem(port_base+0x300, 0x60);
1033 }
1034 #endif
1035 }
1036
1037 static unsigned int mv_scr_offset(unsigned int sc_reg_in)
1038 {
1039 unsigned int ofs;
1040
1041 switch (sc_reg_in) {
1042 case SCR_STATUS:
1043 case SCR_CONTROL:
1044 case SCR_ERROR:
1045 ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32));
1046 break;
1047 case SCR_ACTIVE:
1048 ofs = SATA_ACTIVE_OFS; /* active is not with the others */
1049 break;
1050 default:
1051 ofs = 0xffffffffU;
1052 break;
1053 }
1054 return ofs;
1055 }
1056
1057 static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
1058 {
1059 unsigned int ofs = mv_scr_offset(sc_reg_in);
1060
1061 if (ofs != 0xffffffffU) {
1062 *val = readl(mv_ap_base(ap) + ofs);
1063 return 0;
1064 } else
1065 return -EINVAL;
1066 }
1067
1068 static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
1069 {
1070 unsigned int ofs = mv_scr_offset(sc_reg_in);
1071
1072 if (ofs != 0xffffffffU) {
1073 writelfl(val, mv_ap_base(ap) + ofs);
1074 return 0;
1075 } else
1076 return -EINVAL;
1077 }
1078
1079 static void mv6_dev_config(struct ata_device *adev)
1080 {
1081 /*
1082 * Deal with Gen-II ("mv6") hardware quirks/restrictions:
1083 *
1084 * Gen-II does not support NCQ over a port multiplier
1085 * (no FIS-based switching).
1086 *
1087 * We don't have hob_nsect when doing NCQ commands on Gen-II.
1088 * See mv_qc_prep() for more info.
1089 */
1090 if (adev->flags & ATA_DFLAG_NCQ) {
1091 if (sata_pmp_attached(adev->link->ap)) {
1092 adev->flags &= ~ATA_DFLAG_NCQ;
1093 ata_dev_printk(adev, KERN_INFO,
1094 "NCQ disabled for command-based switching\n");
1095 } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
1096 adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
1097 ata_dev_printk(adev, KERN_INFO,
1098 "max_sectors limited to %u for NCQ\n",
1099 adev->max_sectors);
1100 }
1101 }
1102 }
1103
1104 static int mv_qc_defer(struct ata_queued_cmd *qc)
1105 {
1106 struct ata_link *link = qc->dev->link;
1107 struct ata_port *ap = link->ap;
1108 struct mv_port_priv *pp = ap->private_data;
1109
1110 /*
1111 * Don't allow new commands if we're in a delayed EH state
1112 * for NCQ and/or FIS-based switching.
1113 */
1114 if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
1115 return ATA_DEFER_PORT;
1116 /*
1117 * If the port is completely idle, then allow the new qc.
1118 */
1119 if (ap->nr_active_links == 0)
1120 return 0;
1121
1122 if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
1123 /*
1124 * The port is operating in host queuing mode (EDMA).
1125 * It can accomodate a new qc if the qc protocol
1126 * is compatible with the current host queue mode.
1127 */
1128 if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
1129 /*
1130 * The host queue (EDMA) is in NCQ mode.
1131 * If the new qc is also an NCQ command,
1132 * then allow the new qc.
1133 */
1134 if (qc->tf.protocol == ATA_PROT_NCQ)
1135 return 0;
1136 } else {
1137 /*
1138 * The host queue (EDMA) is in non-NCQ, DMA mode.
1139 * If the new qc is also a non-NCQ, DMA command,
1140 * then allow the new qc.
1141 */
1142 if (qc->tf.protocol == ATA_PROT_DMA)
1143 return 0;
1144 }
1145 }
1146 return ATA_DEFER_PORT;
1147 }
1148
1149 static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs)
1150 {
1151 u32 new_fiscfg, old_fiscfg;
1152 u32 new_ltmode, old_ltmode;
1153 u32 new_haltcond, old_haltcond;
1154
1155 old_fiscfg = readl(port_mmio + FISCFG_OFS);
1156 old_ltmode = readl(port_mmio + LTMODE_OFS);
1157 old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS);
1158
1159 new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR);
1160 new_ltmode = old_ltmode & ~LTMODE_BIT8;
1161 new_haltcond = old_haltcond | EDMA_ERR_DEV;
1162
1163 if (want_fbs) {
1164 new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC;
1165 new_ltmode = old_ltmode | LTMODE_BIT8;
1166 if (want_ncq)
1167 new_haltcond &= ~EDMA_ERR_DEV;
1168 else
1169 new_fiscfg |= FISCFG_WAIT_DEV_ERR;
1170 }
1171
1172 if (new_fiscfg != old_fiscfg)
1173 writelfl(new_fiscfg, port_mmio + FISCFG_OFS);
1174 if (new_ltmode != old_ltmode)
1175 writelfl(new_ltmode, port_mmio + LTMODE_OFS);
1176 if (new_haltcond != old_haltcond)
1177 writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS);
1178 }
1179
1180 static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
1181 {
1182 struct mv_host_priv *hpriv = ap->host->private_data;
1183 u32 old, new;
1184
1185 /* workaround for 88SX60x1 FEr SATA#25 (part 1) */
1186 old = readl(hpriv->base + MV_GPIO_PORT_CTL_OFS);
1187 if (want_ncq)
1188 new = old | (1 << 22);
1189 else
1190 new = old & ~(1 << 22);
1191 if (new != old)
1192 writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS);
1193 }
1194
1195 static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
1196 {
1197 u32 cfg;
1198 struct mv_port_priv *pp = ap->private_data;
1199 struct mv_host_priv *hpriv = ap->host->private_data;
1200 void __iomem *port_mmio = mv_ap_base(ap);
1201
1202 /* set up non-NCQ EDMA configuration */
1203 cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
1204 pp->pp_flags &= ~MV_PP_FLAG_FBS_EN;
1205
1206 if (IS_GEN_I(hpriv))
1207 cfg |= (1 << 8); /* enab config burst size mask */
1208
1209 else if (IS_GEN_II(hpriv)) {
1210 cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
1211 mv_60x1_errata_sata25(ap, want_ncq);
1212
1213 } else if (IS_GEN_IIE(hpriv)) {
1214 int want_fbs = sata_pmp_attached(ap);
1215 /*
1216 * Possible future enhancement:
1217 *
1218 * The chip can use FBS with non-NCQ, if we allow it,
1219 * But first we need to have the error handling in place
1220 * for this mode (datasheet section 7.3.15.4.2.3).
1221 * So disallow non-NCQ FBS for now.
1222 */
1223 want_fbs &= want_ncq;
1224
1225 mv_config_fbs(port_mmio, want_ncq, want_fbs);
1226
1227 if (want_fbs) {
1228 pp->pp_flags |= MV_PP_FLAG_FBS_EN;
1229 cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
1230 }
1231
1232 cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
1233 cfg |= (1 << 22); /* enab 4-entry host queue cache */
1234 if (HAS_PCI(ap->host))
1235 cfg |= (1 << 18); /* enab early completion */
1236 if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
1237 cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
1238 }
1239
1240 if (want_ncq) {
1241 cfg |= EDMA_CFG_NCQ;
1242 pp->pp_flags |= MV_PP_FLAG_NCQ_EN;
1243 } else
1244 pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN;
1245
1246 writelfl(cfg, port_mmio + EDMA_CFG_OFS);
1247 }
1248
1249 static void mv_port_free_dma_mem(struct ata_port *ap)
1250 {
1251 struct mv_host_priv *hpriv = ap->host->private_data;
1252 struct mv_port_priv *pp = ap->private_data;
1253 int tag;
1254
1255 if (pp->crqb) {
1256 dma_pool_free(hpriv->crqb_pool, pp->crqb, pp->crqb_dma);
1257 pp->crqb = NULL;
1258 }
1259 if (pp->crpb) {
1260 dma_pool_free(hpriv->crpb_pool, pp->crpb, pp->crpb_dma);
1261 pp->crpb = NULL;
1262 }
1263 /*
1264 * For GEN_I, there's no NCQ, so we have only a single sg_tbl.
1265 * For later hardware, we have one unique sg_tbl per NCQ tag.
1266 */
1267 for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
1268 if (pp->sg_tbl[tag]) {
1269 if (tag == 0 || !IS_GEN_I(hpriv))
1270 dma_pool_free(hpriv->sg_tbl_pool,
1271 pp->sg_tbl[tag],
1272 pp->sg_tbl_dma[tag]);
1273 pp->sg_tbl[tag] = NULL;
1274 }
1275 }
1276 }
1277
1278 /**
1279 * mv_port_start - Port specific init/start routine.
1280 * @ap: ATA channel to manipulate
1281 *
1282 * Allocate and point to DMA memory, init port private memory,
1283 * zero indices.
1284 *
1285 * LOCKING:
1286 * Inherited from caller.
1287 */
1288 static int mv_port_start(struct ata_port *ap)
1289 {
1290 struct device *dev = ap->host->dev;
1291 struct mv_host_priv *hpriv = ap->host->private_data;
1292 struct mv_port_priv *pp;
1293 int tag;
1294
1295 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1296 if (!pp)
1297 return -ENOMEM;
1298 ap->private_data = pp;
1299
1300 pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
1301 if (!pp->crqb)
1302 return -ENOMEM;
1303 memset(pp->crqb, 0, MV_CRQB_Q_SZ);
1304
1305 pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma);
1306 if (!pp->crpb)
1307 goto out_port_free_dma_mem;
1308 memset(pp->crpb, 0, MV_CRPB_Q_SZ);
1309
1310 /*
1311 * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
1312 * For later hardware, we need one unique sg_tbl per NCQ tag.
1313 */
1314 for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
1315 if (tag == 0 || !IS_GEN_I(hpriv)) {
1316 pp->sg_tbl[tag] = dma_pool_alloc(hpriv->sg_tbl_pool,
1317 GFP_KERNEL, &pp->sg_tbl_dma[tag]);
1318 if (!pp->sg_tbl[tag])
1319 goto out_port_free_dma_mem;
1320 } else {
1321 pp->sg_tbl[tag] = pp->sg_tbl[0];
1322 pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
1323 }
1324 }
1325 return 0;
1326
1327 out_port_free_dma_mem:
1328 mv_port_free_dma_mem(ap);
1329 return -ENOMEM;
1330 }
1331
1332 /**
1333 * mv_port_stop - Port specific cleanup/stop routine.
1334 * @ap: ATA channel to manipulate
1335 *
1336 * Stop DMA, cleanup port memory.
1337 *
1338 * LOCKING:
1339 * This routine uses the host lock to protect the DMA stop.
1340 */
1341 static void mv_port_stop(struct ata_port *ap)
1342 {
1343 mv_stop_edma(ap);
1344 mv_port_free_dma_mem(ap);
1345 }
1346
1347 /**
1348 * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
1349 * @qc: queued command whose SG list to source from
1350 *
1351 * Populate the SG list and mark the last entry.
1352 *
1353 * LOCKING:
1354 * Inherited from caller.
1355 */
1356 static void mv_fill_sg(struct ata_queued_cmd *qc)
1357 {
1358 struct mv_port_priv *pp = qc->ap->private_data;
1359 struct scatterlist *sg;
1360 struct mv_sg *mv_sg, *last_sg = NULL;
1361 unsigned int si;
1362
1363 mv_sg = pp->sg_tbl[qc->tag];
1364 for_each_sg(qc->sg, sg, qc->n_elem, si) {
1365 dma_addr_t addr = sg_dma_address(sg);
1366 u32 sg_len = sg_dma_len(sg);
1367
1368 while (sg_len) {
1369 u32 offset = addr & 0xffff;
1370 u32 len = sg_len;
1371
1372 if ((offset + sg_len > 0x10000))
1373 len = 0x10000 - offset;
1374
1375 mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
1376 mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
1377 mv_sg->flags_size = cpu_to_le32(len & 0xffff);
1378
1379 sg_len -= len;
1380 addr += len;
1381
1382 last_sg = mv_sg;
1383 mv_sg++;
1384 }
1385 }
1386
1387 if (likely(last_sg))
1388 last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
1389 }
1390
1391 static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
1392 {
1393 u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
1394 (last ? CRQB_CMD_LAST : 0);
1395 *cmdw = cpu_to_le16(tmp);
1396 }
1397
1398 /**
1399 * mv_qc_prep - Host specific command preparation.
1400 * @qc: queued command to prepare
1401 *
1402 * This routine simply redirects to the general purpose routine
1403 * if command is not DMA. Else, it handles prep of the CRQB
1404 * (command request block), does some sanity checking, and calls
1405 * the SG load routine.
1406 *
1407 * LOCKING:
1408 * Inherited from caller.
1409 */
1410 static void mv_qc_prep(struct ata_queued_cmd *qc)
1411 {
1412 struct ata_port *ap = qc->ap;
1413 struct mv_port_priv *pp = ap->private_data;
1414 __le16 *cw;
1415 struct ata_taskfile *tf;
1416 u16 flags = 0;
1417 unsigned in_index;
1418
1419 if ((qc->tf.protocol != ATA_PROT_DMA) &&
1420 (qc->tf.protocol != ATA_PROT_NCQ))
1421 return;
1422
1423 /* Fill in command request block
1424 */
1425 if (!(qc->tf.flags & ATA_TFLAG_WRITE))
1426 flags |= CRQB_FLAG_READ;
1427 WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
1428 flags |= qc->tag << CRQB_TAG_SHIFT;
1429 flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
1430
1431 /* get current queue index from software */
1432 in_index = pp->req_idx;
1433
1434 pp->crqb[in_index].sg_addr =
1435 cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
1436 pp->crqb[in_index].sg_addr_hi =
1437 cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
1438 pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
1439
1440 cw = &pp->crqb[in_index].ata_cmd[0];
1441 tf = &qc->tf;
1442
1443 /* Sadly, the CRQB cannot accomodate all registers--there are
1444 * only 11 bytes...so we must pick and choose required
1445 * registers based on the command. So, we drop feature and
1446 * hob_feature for [RW] DMA commands, but they are needed for
1447 * NCQ. NCQ will drop hob_nsect.
1448 */
1449 switch (tf->command) {
1450 case ATA_CMD_READ:
1451 case ATA_CMD_READ_EXT:
1452 case ATA_CMD_WRITE:
1453 case ATA_CMD_WRITE_EXT:
1454 case ATA_CMD_WRITE_FUA_EXT:
1455 mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
1456 break;
1457 case ATA_CMD_FPDMA_READ:
1458 case ATA_CMD_FPDMA_WRITE:
1459 mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
1460 mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
1461 break;
1462 default:
1463 /* The only other commands EDMA supports in non-queued and
1464 * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
1465 * of which are defined/used by Linux. If we get here, this
1466 * driver needs work.
1467 *
1468 * FIXME: modify libata to give qc_prep a return value and
1469 * return error here.
1470 */
1471 BUG_ON(tf->command);
1472 break;
1473 }
1474 mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
1475 mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
1476 mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0);
1477 mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0);
1478 mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0);
1479 mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0);
1480 mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0);
1481 mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
1482 mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
1483
1484 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
1485 return;
1486 mv_fill_sg(qc);
1487 }
1488
1489 /**
1490 * mv_qc_prep_iie - Host specific command preparation.
1491 * @qc: queued command to prepare
1492 *
1493 * This routine simply redirects to the general purpose routine
1494 * if command is not DMA. Else, it handles prep of the CRQB
1495 * (command request block), does some sanity checking, and calls
1496 * the SG load routine.
1497 *
1498 * LOCKING:
1499 * Inherited from caller.
1500 */
1501 static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
1502 {
1503 struct ata_port *ap = qc->ap;
1504 struct mv_port_priv *pp = ap->private_data;
1505 struct mv_crqb_iie *crqb;
1506 struct ata_taskfile *tf;
1507 unsigned in_index;
1508 u32 flags = 0;
1509
1510 if ((qc->tf.protocol != ATA_PROT_DMA) &&
1511 (qc->tf.protocol != ATA_PROT_NCQ))
1512 return;
1513
1514 /* Fill in Gen IIE command request block */
1515 if (!(qc->tf.flags & ATA_TFLAG_WRITE))
1516 flags |= CRQB_FLAG_READ;
1517
1518 WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
1519 flags |= qc->tag << CRQB_TAG_SHIFT;
1520 flags |= qc->tag << CRQB_HOSTQ_SHIFT;
1521 flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
1522
1523 /* get current queue index from software */
1524 in_index = pp->req_idx;
1525
1526 crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
1527 crqb->addr = cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
1528 crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
1529 crqb->flags = cpu_to_le32(flags);
1530
1531 tf = &qc->tf;
1532 crqb->ata_cmd[0] = cpu_to_le32(
1533 (tf->command << 16) |
1534 (tf->feature << 24)
1535 );
1536 crqb->ata_cmd[1] = cpu_to_le32(
1537 (tf->lbal << 0) |
1538 (tf->lbam << 8) |
1539 (tf->lbah << 16) |
1540 (tf->device << 24)
1541 );
1542 crqb->ata_cmd[2] = cpu_to_le32(
1543 (tf->hob_lbal << 0) |
1544 (tf->hob_lbam << 8) |
1545 (tf->hob_lbah << 16) |
1546 (tf->hob_feature << 24)
1547 );
1548 crqb->ata_cmd[3] = cpu_to_le32(
1549 (tf->nsect << 0) |
1550 (tf->hob_nsect << 8)
1551 );
1552
1553 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
1554 return;
1555 mv_fill_sg(qc);
1556 }
1557
1558 /**
1559 * mv_qc_issue - Initiate a command to the host
1560 * @qc: queued command to start
1561 *
1562 * This routine simply redirects to the general purpose routine
1563 * if command is not DMA. Else, it sanity checks our local
1564 * caches of the request producer/consumer indices then enables
1565 * DMA and bumps the request producer index.
1566 *
1567 * LOCKING:
1568 * Inherited from caller.
1569 */
1570 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
1571 {
1572 struct ata_port *ap = qc->ap;
1573 void __iomem *port_mmio = mv_ap_base(ap);
1574 struct mv_port_priv *pp = ap->private_data;
1575 u32 in_index;
1576
1577 if ((qc->tf.protocol != ATA_PROT_DMA) &&
1578 (qc->tf.protocol != ATA_PROT_NCQ)) {
1579 /*
1580 * We're about to send a non-EDMA capable command to the
1581 * port. Turn off EDMA so there won't be problems accessing
1582 * shadow block, etc registers.
1583 */
1584 mv_stop_edma(ap);
1585 mv_pmp_select(ap, qc->dev->link->pmp);
1586 return ata_sff_qc_issue(qc);
1587 }
1588
1589 mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
1590
1591 pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK;
1592 in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
1593
1594 /* and write the request in pointer to kick the EDMA to life */
1595 writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
1596 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
1597
1598 return 0;
1599 }
1600
1601 static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap)
1602 {
1603 struct mv_port_priv *pp = ap->private_data;
1604 struct ata_queued_cmd *qc;
1605
1606 if (pp->pp_flags & MV_PP_FLAG_NCQ_EN)
1607 return NULL;
1608 qc = ata_qc_from_tag(ap, ap->link.active_tag);
1609 if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
1610 qc = NULL;
1611 return qc;
1612 }
1613
1614 static void mv_pmp_error_handler(struct ata_port *ap)
1615 {
1616 unsigned int pmp, pmp_map;
1617 struct mv_port_priv *pp = ap->private_data;
1618
1619 if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) {
1620 /*
1621 * Perform NCQ error analysis on failed PMPs
1622 * before we freeze the port entirely.
1623 *
1624 * The failed PMPs are marked earlier by mv_pmp_eh_prep().
1625 */
1626 pmp_map = pp->delayed_eh_pmp_map;
1627 pp->pp_flags &= ~MV_PP_FLAG_DELAYED_EH;
1628 for (pmp = 0; pmp_map != 0; pmp++) {
1629 unsigned int this_pmp = (1 << pmp);
1630 if (pmp_map & this_pmp) {
1631 struct ata_link *link = &ap->pmp_link[pmp];
1632 pmp_map &= ~this_pmp;
1633 ata_eh_analyze_ncq_error(link);
1634 }
1635 }
1636 ata_port_freeze(ap);
1637 }
1638 sata_pmp_error_handler(ap);
1639 }
1640
1641 static unsigned int mv_get_err_pmp_map(struct ata_port *ap)
1642 {
1643 void __iomem *port_mmio = mv_ap_base(ap);
1644
1645 return readl(port_mmio + SATA_TESTCTL_OFS) >> 16;
1646 }
1647
1648 static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map)
1649 {
1650 struct ata_eh_info *ehi;
1651 unsigned int pmp;
1652
1653 /*
1654 * Initialize EH info for PMPs which saw device errors
1655 */
1656 ehi = &ap->link.eh_info;
1657 for (pmp = 0; pmp_map != 0; pmp++) {
1658 unsigned int this_pmp = (1 << pmp);
1659 if (pmp_map & this_pmp) {
1660 struct ata_link *link = &ap->pmp_link[pmp];
1661
1662 pmp_map &= ~this_pmp;
1663 ehi = &link->eh_info;
1664 ata_ehi_clear_desc(ehi);
1665 ata_ehi_push_desc(ehi, "dev err");
1666 ehi->err_mask |= AC_ERR_DEV;
1667 ehi->action |= ATA_EH_RESET;
1668 ata_link_abort(link);
1669 }
1670 }
1671 }
1672
1673 static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap)
1674 {
1675 struct mv_port_priv *pp = ap->private_data;
1676 int failed_links;
1677 unsigned int old_map, new_map;
1678
1679 /*
1680 * Device error during FBS+NCQ operation:
1681 *
1682 * Set a port flag to prevent further I/O being enqueued.
1683 * Leave the EDMA running to drain outstanding commands from this port.
1684 * Perform the post-mortem/EH only when all responses are complete.
1685 * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.2).
1686 */
1687 if (!(pp->pp_flags & MV_PP_FLAG_DELAYED_EH)) {
1688 pp->pp_flags |= MV_PP_FLAG_DELAYED_EH;
1689 pp->delayed_eh_pmp_map = 0;
1690 }
1691 old_map = pp->delayed_eh_pmp_map;
1692 new_map = old_map | mv_get_err_pmp_map(ap);
1693
1694 if (old_map != new_map) {
1695 pp->delayed_eh_pmp_map = new_map;
1696 mv_pmp_eh_prep(ap, new_map & ~old_map);
1697 }
1698 failed_links = hweight16(new_map);
1699
1700 ata_port_printk(ap, KERN_INFO, "%s: pmp_map=%04x qc_map=%04x "
1701 "failed_links=%d nr_active_links=%d\n",
1702 __func__, pp->delayed_eh_pmp_map,
1703 ap->qc_active, failed_links,
1704 ap->nr_active_links);
1705
1706 if (ap->nr_active_links <= failed_links) {
1707 mv_process_crpb_entries(ap, pp);
1708 mv_stop_edma(ap);
1709 mv_eh_freeze(ap);
1710 ata_port_printk(ap, KERN_INFO, "%s: done\n", __func__);
1711 return 1; /* handled */
1712 }
1713 ata_port_printk(ap, KERN_INFO, "%s: waiting\n", __func__);
1714 return 1; /* handled */
1715 }
1716
1717 static int mv_handle_fbs_non_ncq_dev_err(struct ata_port *ap)
1718 {
1719 /*
1720 * Possible future enhancement:
1721 *
1722 * FBS+non-NCQ operation is not yet implemented.
1723 * See related notes in mv_edma_cfg().
1724 *
1725 * Device error during FBS+non-NCQ operation:
1726 *
1727 * We need to snapshot the shadow registers for each failed command.
1728 * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.3).
1729 */
1730 return 0; /* not handled */
1731 }
1732
1733 static int mv_handle_dev_err(struct ata_port *ap, u32 edma_err_cause)
1734 {
1735 struct mv_port_priv *pp = ap->private_data;
1736
1737 if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
1738 return 0; /* EDMA was not active: not handled */
1739 if (!(pp->pp_flags & MV_PP_FLAG_FBS_EN))
1740 return 0; /* FBS was not active: not handled */
1741
1742 if (!(edma_err_cause & EDMA_ERR_DEV))
1743 return 0; /* non DEV error: not handled */
1744 edma_err_cause &= ~EDMA_ERR_IRQ_TRANSIENT;
1745 if (edma_err_cause & ~(EDMA_ERR_DEV | EDMA_ERR_SELF_DIS))
1746 return 0; /* other problems: not handled */
1747
1748 if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
1749 /*
1750 * EDMA should NOT have self-disabled for this case.
1751 * If it did, then something is wrong elsewhere,
1752 * and we cannot handle it here.
1753 */
1754 if (edma_err_cause & EDMA_ERR_SELF_DIS) {
1755 ata_port_printk(ap, KERN_WARNING,
1756 "%s: err_cause=0x%x pp_flags=0x%x\n",
1757 __func__, edma_err_cause, pp->pp_flags);
1758 return 0; /* not handled */
1759 }
1760 return mv_handle_fbs_ncq_dev_err(ap);
1761 } else {
1762 /*
1763 * EDMA should have self-disabled for this case.
1764 * If it did not, then something is wrong elsewhere,
1765 * and we cannot handle it here.
1766 */
1767 if (!(edma_err_cause & EDMA_ERR_SELF_DIS)) {
1768 ata_port_printk(ap, KERN_WARNING,
1769 "%s: err_cause=0x%x pp_flags=0x%x\n",
1770 __func__, edma_err_cause, pp->pp_flags);
1771 return 0; /* not handled */
1772 }
1773 return mv_handle_fbs_non_ncq_dev_err(ap);
1774 }
1775 return 0; /* not handled */
1776 }
1777
1778 static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
1779 {
1780 struct ata_eh_info *ehi = &ap->link.eh_info;
1781 char *when = "idle";
1782
1783 ata_ehi_clear_desc(ehi);
1784 if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
1785 when = "disabled";
1786 } else if (edma_was_enabled) {
1787 when = "EDMA enabled";
1788 } else {
1789 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
1790 if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
1791 when = "polling";
1792 }
1793 ata_ehi_push_desc(ehi, "unexpected device interrupt while %s", when);
1794 ehi->err_mask |= AC_ERR_OTHER;
1795 ehi->action |= ATA_EH_RESET;
1796 ata_port_freeze(ap);
1797 }
1798
1799 /**
1800 * mv_err_intr - Handle error interrupts on the port
1801 * @ap: ATA channel to manipulate
1802 * @qc: affected command (non-NCQ), or NULL
1803 *
1804 * Most cases require a full reset of the chip's state machine,
1805 * which also performs a COMRESET.
1806 * Also, if the port disabled DMA, update our cached copy to match.
1807 *
1808 * LOCKING:
1809 * Inherited from caller.
1810 */
1811 static void mv_err_intr(struct ata_port *ap)
1812 {
1813 void __iomem *port_mmio = mv_ap_base(ap);
1814 u32 edma_err_cause, eh_freeze_mask, serr = 0;
1815 struct mv_port_priv *pp = ap->private_data;
1816 struct mv_host_priv *hpriv = ap->host->private_data;
1817 unsigned int action = 0, err_mask = 0;
1818 struct ata_eh_info *ehi = &ap->link.eh_info;
1819 struct ata_queued_cmd *qc;
1820 int abort = 0;
1821
1822 /*
1823 * Read and clear the SError and err_cause bits.
1824 */
1825 sata_scr_read(&ap->link, SCR_ERROR, &serr);
1826 sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
1827
1828 edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
1829 writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
1830
1831 ata_port_printk(ap, KERN_INFO, "%s: err_cause=%08x pp_flags=0x%x\n",
1832 __func__, edma_err_cause, pp->pp_flags);
1833
1834 if (edma_err_cause & EDMA_ERR_DEV) {
1835 /*
1836 * Device errors during FIS-based switching operation
1837 * require special handling.
1838 */
1839 if (mv_handle_dev_err(ap, edma_err_cause))
1840 return;
1841 }
1842
1843 qc = mv_get_active_qc(ap);
1844 ata_ehi_clear_desc(ehi);
1845 ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x",
1846 edma_err_cause, pp->pp_flags);
1847 /*
1848 * All generations share these EDMA error cause bits:
1849 */
1850 if (edma_err_cause & EDMA_ERR_DEV) {
1851 err_mask |= AC_ERR_DEV;
1852 action |= ATA_EH_RESET;
1853 ata_ehi_push_desc(ehi, "dev error");
1854 }
1855 if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
1856 EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
1857 EDMA_ERR_INTRL_PAR)) {
1858 err_mask |= AC_ERR_ATA_BUS;
1859 action |= ATA_EH_RESET;
1860 ata_ehi_push_desc(ehi, "parity error");
1861 }
1862 if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
1863 ata_ehi_hotplugged(ehi);
1864 ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
1865 "dev disconnect" : "dev connect");
1866 action |= ATA_EH_RESET;
1867 }
1868
1869 /*
1870 * Gen-I has a different SELF_DIS bit,
1871 * different FREEZE bits, and no SERR bit:
1872 */
1873 if (IS_GEN_I(hpriv)) {
1874 eh_freeze_mask = EDMA_EH_FREEZE_5;
1875 if (edma_err_cause & EDMA_ERR_SELF_DIS_5) {
1876 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
1877 ata_ehi_push_desc(ehi, "EDMA self-disable");
1878 }
1879 } else {
1880 eh_freeze_mask = EDMA_EH_FREEZE;
1881 if (edma_err_cause & EDMA_ERR_SELF_DIS) {
1882 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
1883 ata_ehi_push_desc(ehi, "EDMA self-disable");
1884 }
1885 if (edma_err_cause & EDMA_ERR_SERR) {
1886 ata_ehi_push_desc(ehi, "SError=%08x", serr);
1887 err_mask |= AC_ERR_ATA_BUS;
1888 action |= ATA_EH_RESET;
1889 }
1890 }
1891
1892 if (!err_mask) {
1893 err_mask = AC_ERR_OTHER;
1894 action |= ATA_EH_RESET;
1895 }
1896
1897 ehi->serror |= serr;
1898 ehi->action |= action;
1899
1900 if (qc)
1901 qc->err_mask |= err_mask;
1902 else
1903 ehi->err_mask |= err_mask;
1904
1905 if (err_mask == AC_ERR_DEV) {
1906 /*
1907 * Cannot do ata_port_freeze() here,
1908 * because it would kill PIO access,
1909 * which is needed for further diagnosis.
1910 */
1911 mv_eh_freeze(ap);
1912 abort = 1;
1913 } else if (edma_err_cause & eh_freeze_mask) {
1914 /*
1915 * Note to self: ata_port_freeze() calls ata_port_abort()
1916 */
1917 ata_port_freeze(ap);
1918 } else {
1919 abort = 1;
1920 }
1921
1922 if (abort) {
1923 if (qc)
1924 ata_link_abort(qc->dev->link);
1925 else
1926 ata_port_abort(ap);
1927 }
1928 }
1929
1930 static void mv_process_crpb_response(struct ata_port *ap,
1931 struct mv_crpb *response, unsigned int tag, int ncq_enabled)
1932 {
1933 struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
1934
1935 if (qc) {
1936 u8 ata_status;
1937 u16 edma_status = le16_to_cpu(response->flags);
1938 /*
1939 * edma_status from a response queue entry:
1940 * LSB is from EDMA_ERR_IRQ_CAUSE_OFS (non-NCQ only).
1941 * MSB is saved ATA status from command completion.
1942 */
1943 if (!ncq_enabled) {
1944 u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV;
1945 if (err_cause) {
1946 /*
1947 * Error will be seen/handled by mv_err_intr().
1948 * So do nothing at all here.
1949 */
1950 return;
1951 }
1952 }
1953 ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
1954 if (!ac_err_mask(ata_status))
1955 ata_qc_complete(qc);
1956 /* else: leave it for mv_err_intr() */
1957 } else {
1958 ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n",
1959 __func__, tag);
1960 }
1961 }
1962
1963 static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp)
1964 {
1965 void __iomem *port_mmio = mv_ap_base(ap);
1966 struct mv_host_priv *hpriv = ap->host->private_data;
1967 u32 in_index;
1968 bool work_done = false;
1969 int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN);
1970
1971 /* Get the hardware queue position index */
1972 in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
1973 >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
1974
1975 /* Process new responses from since the last time we looked */
1976 while (in_index != pp->resp_idx) {
1977 unsigned int tag;
1978 struct mv_crpb *response = &pp->crpb[pp->resp_idx];
1979
1980 pp->resp_idx = (pp->resp_idx + 1) & MV_MAX_Q_DEPTH_MASK;
1981
1982 if (IS_GEN_I(hpriv)) {
1983 /* 50xx: no NCQ, only one command active at a time */
1984 tag = ap->link.active_tag;
1985 } else {
1986 /* Gen II/IIE: get command tag from CRPB entry */
1987 tag = le16_to_cpu(response->id) & 0x1f;
1988 }
1989 mv_process_crpb_response(ap, response, tag, ncq_enabled);
1990 work_done = true;
1991 }
1992
1993 /* Update the software queue position index in hardware */
1994 if (work_done)
1995 writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
1996 (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT),
1997 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
1998 }
1999
2000 static void mv_port_intr(struct ata_port *ap, u32 port_cause)
2001 {
2002 struct mv_port_priv *pp;
2003 int edma_was_enabled;
2004
2005 if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
2006 mv_unexpected_intr(ap, 0);
2007 return;
2008 }
2009 /*
2010 * Grab a snapshot of the EDMA_EN flag setting,
2011 * so that we have a consistent view for this port,
2012 * even if something we call of our routines changes it.
2013 */
2014 pp = ap->private_data;
2015 edma_was_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
2016 /*
2017 * Process completed CRPB response(s) before other events.
2018 */
2019 if (edma_was_enabled && (port_cause & DONE_IRQ)) {
2020 mv_process_crpb_entries(ap, pp);
2021 if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
2022 mv_handle_fbs_ncq_dev_err(ap);
2023 }
2024 /*
2025 * Handle chip-reported errors, or continue on to handle PIO.
2026 */
2027 if (unlikely(port_cause & ERR_IRQ)) {
2028 mv_err_intr(ap);
2029 } else if (!edma_was_enabled) {
2030 struct ata_queued_cmd *qc = mv_get_active_qc(ap);
2031 if (qc)
2032 ata_sff_host_intr(ap, qc);
2033 else
2034 mv_unexpected_intr(ap, edma_was_enabled);
2035 }
2036 }
2037
2038 /**
2039 * mv_host_intr - Handle all interrupts on the given host controller
2040 * @host: host specific structure
2041 * @main_irq_cause: Main interrupt cause register for the chip.
2042 *
2043 * LOCKING:
2044 * Inherited from caller.
2045 */
2046 static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
2047 {
2048 struct mv_host_priv *hpriv = host->private_data;
2049 void __iomem *mmio = hpriv->base, *hc_mmio;
2050 unsigned int handled = 0, port;
2051
2052 for (port = 0; port < hpriv->n_ports; port++) {
2053 struct ata_port *ap = host->ports[port];
2054 unsigned int p, shift, hardport, port_cause;
2055
2056 MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
2057 /*
2058 * Each hc within the host has its own hc_irq_cause register,
2059 * where the interrupting ports bits get ack'd.
2060 */
2061 if (hardport == 0) { /* first port on this hc ? */
2062 u32 hc_cause = (main_irq_cause >> shift) & HC0_IRQ_PEND;
2063 u32 port_mask, ack_irqs;
2064 /*
2065 * Skip this entire hc if nothing pending for any ports
2066 */
2067 if (!hc_cause) {
2068 port += MV_PORTS_PER_HC - 1;
2069 continue;
2070 }
2071 /*
2072 * We don't need/want to read the hc_irq_cause register,
2073 * because doing so hurts performance, and
2074 * main_irq_cause already gives us everything we need.
2075 *
2076 * But we do have to *write* to the hc_irq_cause to ack
2077 * the ports that we are handling this time through.
2078 *
2079 * This requires that we create a bitmap for those
2080 * ports which interrupted us, and use that bitmap
2081 * to ack (only) those ports via hc_irq_cause.
2082 */
2083 ack_irqs = 0;
2084 for (p = 0; p < MV_PORTS_PER_HC; ++p) {
2085 if ((port + p) >= hpriv->n_ports)
2086 break;
2087 port_mask = (DONE_IRQ | ERR_IRQ) << (p * 2);
2088 if (hc_cause & port_mask)
2089 ack_irqs |= (DMA_IRQ | DEV_IRQ) << p;
2090 }
2091 hc_mmio = mv_hc_base_from_port(mmio, port);
2092 writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE_OFS);
2093 handled = 1;
2094 }
2095 /*
2096 * Handle interrupts signalled for this port:
2097 */
2098 port_cause = (main_irq_cause >> shift) & (DONE_IRQ | ERR_IRQ);
2099 if (port_cause)
2100 mv_port_intr(ap, port_cause);
2101 }
2102 return handled;
2103 }
2104
2105 static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
2106 {
2107 struct mv_host_priv *hpriv = host->private_data;
2108 struct ata_port *ap;
2109 struct ata_queued_cmd *qc;
2110 struct ata_eh_info *ehi;
2111 unsigned int i, err_mask, printed = 0;
2112 u32 err_cause;
2113
2114 err_cause = readl(mmio + hpriv->irq_cause_ofs);
2115
2116 dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
2117 err_cause);
2118
2119 DPRINTK("All regs @ PCI error\n");
2120 mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
2121
2122 writelfl(0, mmio + hpriv->irq_cause_ofs);
2123
2124 for (i = 0; i < host->n_ports; i++) {
2125 ap = host->ports[i];
2126 if (!ata_link_offline(&ap->link)) {
2127 ehi = &ap->link.eh_info;
2128 ata_ehi_clear_desc(ehi);
2129 if (!printed++)
2130 ata_ehi_push_desc(ehi,
2131 "PCI err cause 0x%08x", err_cause);
2132 err_mask = AC_ERR_HOST_BUS;
2133 ehi->action = ATA_EH_RESET;
2134 qc = ata_qc_from_tag(ap, ap->link.active_tag);
2135 if (qc)
2136 qc->err_mask |= err_mask;
2137 else
2138 ehi->err_mask |= err_mask;
2139
2140 ata_port_freeze(ap);
2141 }
2142 }
2143 return 1; /* handled */
2144 }
2145
2146 /**
2147 * mv_interrupt - Main interrupt event handler
2148 * @irq: unused
2149 * @dev_instance: private data; in this case the host structure
2150 *
2151 * Read the read only register to determine if any host
2152 * controllers have pending interrupts. If so, call lower level
2153 * routine to handle. Also check for PCI errors which are only
2154 * reported here.
2155 *
2156 * LOCKING:
2157 * This routine holds the host lock while processing pending
2158 * interrupts.
2159 */
2160 static irqreturn_t mv_interrupt(int irq, void *dev_instance)
2161 {
2162 struct ata_host *host = dev_instance;
2163 struct mv_host_priv *hpriv = host->private_data;
2164 unsigned int handled = 0;
2165 u32 main_irq_cause, main_irq_mask;
2166
2167 spin_lock(&host->lock);
2168 main_irq_cause = readl(hpriv->main_irq_cause_addr);
2169 main_irq_mask = readl(hpriv->main_irq_mask_addr);
2170 /*
2171 * Deal with cases where we either have nothing pending, or have read
2172 * a bogus register value which can indicate HW removal or PCI fault.
2173 */
2174 if ((main_irq_cause & main_irq_mask) && (main_irq_cause != 0xffffffffU)) {
2175 if (unlikely((main_irq_cause & PCI_ERR) && HAS_PCI(host)))
2176 handled = mv_pci_error(host, hpriv->base);
2177 else
2178 handled = mv_host_intr(host, main_irq_cause);
2179 }
2180 spin_unlock(&host->lock);
2181 return IRQ_RETVAL(handled);
2182 }
2183
2184 static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
2185 {
2186 unsigned int ofs;
2187
2188 switch (sc_reg_in) {
2189 case SCR_STATUS:
2190 case SCR_ERROR:
2191 case SCR_CONTROL:
2192 ofs = sc_reg_in * sizeof(u32);
2193 break;
2194 default:
2195 ofs = 0xffffffffU;
2196 break;
2197 }
2198 return ofs;
2199 }
2200
2201 static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
2202 {
2203 struct mv_host_priv *hpriv = ap->host->private_data;
2204 void __iomem *mmio = hpriv->base;
2205 void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
2206 unsigned int ofs = mv5_scr_offset(sc_reg_in);
2207
2208 if (ofs != 0xffffffffU) {
2209 *val = readl(addr + ofs);
2210 return 0;
2211 } else
2212 return -EINVAL;
2213 }
2214
2215 static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
2216 {
2217 struct mv_host_priv *hpriv = ap->host->private_data;
2218 void __iomem *mmio = hpriv->base;
2219 void __iomem *addr = mv5_phy_base(mmio, ap->port_no);
2220 unsigned int ofs = mv5_scr_offset(sc_reg_in);
2221
2222 if (ofs != 0xffffffffU) {
2223 writelfl(val, addr + ofs);
2224 return 0;
2225 } else
2226 return -EINVAL;
2227 }
2228
2229 static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio)
2230 {
2231 struct pci_dev *pdev = to_pci_dev(host->dev);
2232 int early_5080;
2233
2234 early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
2235
2236 if (!early_5080) {
2237 u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
2238 tmp |= (1 << 0);
2239 writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
2240 }
2241
2242 mv_reset_pci_bus(host, mmio);
2243 }
2244
2245 static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
2246 {
2247 writel(0x0fcfffff, mmio + MV_FLASH_CTL_OFS);
2248 }
2249
2250 static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
2251 void __iomem *mmio)
2252 {
2253 void __iomem *phy_mmio = mv5_phy_base(mmio, idx);
2254 u32 tmp;
2255
2256 tmp = readl(phy_mmio + MV5_PHY_MODE);
2257
2258 hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */
2259 hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */
2260 }
2261
2262 static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
2263 {
2264 u32 tmp;
2265
2266 writel(0, mmio + MV_GPIO_PORT_CTL_OFS);
2267
2268 /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
2269
2270 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
2271 tmp |= ~(1 << 0);
2272 writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
2273 }
2274
2275 static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
2276 unsigned int port)
2277 {
2278 void __iomem *phy_mmio = mv5_phy_base(mmio, port);
2279 const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5);
2280 u32 tmp;
2281 int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
2282
2283 if (fix_apm_sq) {
2284 tmp = readl(phy_mmio + MV5_LTMODE_OFS);
2285 tmp |= (1 << 19);
2286 writel(tmp, phy_mmio + MV5_LTMODE_OFS);
2287
2288 tmp = readl(phy_mmio + MV5_PHY_CTL_OFS);
2289 tmp &= ~0x3;
2290 tmp |= 0x1;
2291 writel(tmp, phy_mmio + MV5_PHY_CTL_OFS);
2292 }
2293
2294 tmp = readl(phy_mmio + MV5_PHY_MODE);
2295 tmp &= ~mask;
2296 tmp |= hpriv->signal[port].pre;
2297 tmp |= hpriv->signal[port].amps;
2298 writel(tmp, phy_mmio + MV5_PHY_MODE);
2299 }
2300
2301
2302 #undef ZERO
2303 #define ZERO(reg) writel(0, port_mmio + (reg))
2304 static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
2305 unsigned int port)
2306 {
2307 void __iomem *port_mmio = mv_port_base(mmio, port);
2308
2309 mv_reset_channel(hpriv, mmio, port);
2310
2311 ZERO(0x028); /* command */
2312 writel(0x11f, port_mmio + EDMA_CFG_OFS);
2313 ZERO(0x004); /* timer */
2314 ZERO(0x008); /* irq err cause */
2315 ZERO(0x00c); /* irq err mask */
2316 ZERO(0x010); /* rq bah */
2317 ZERO(0x014); /* rq inp */
2318 ZERO(0x018); /* rq outp */
2319 ZERO(0x01c); /* respq bah */
2320 ZERO(0x024); /* respq outp */
2321 ZERO(0x020); /* respq inp */
2322 ZERO(0x02c); /* test control */
2323 writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
2324 }
2325 #undef ZERO
2326
2327 #define ZERO(reg) writel(0, hc_mmio + (reg))
2328 static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
2329 unsigned int hc)
2330 {
2331 void __iomem *hc_mmio = mv_hc_base(mmio, hc);
2332 u32 tmp;
2333
2334 ZERO(0x00c);
2335 ZERO(0x010);
2336 ZERO(0x014);
2337 ZERO(0x018);
2338
2339 tmp = readl(hc_mmio + 0x20);
2340 tmp &= 0x1c1c1c1c;
2341 tmp |= 0x03030303;
2342 writel(tmp, hc_mmio + 0x20);
2343 }
2344 #undef ZERO
2345
2346 static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
2347 unsigned int n_hc)
2348 {
2349 unsigned int hc, port;
2350
2351 for (hc = 0; hc < n_hc; hc++) {
2352 for (port = 0; port < MV_PORTS_PER_HC; port++)
2353 mv5_reset_hc_port(hpriv, mmio,
2354 (hc * MV_PORTS_PER_HC) + port);
2355
2356 mv5_reset_one_hc(hpriv, mmio, hc);
2357 }
2358
2359 return 0;
2360 }
2361
2362 #undef ZERO
2363 #define ZERO(reg) writel(0, mmio + (reg))
2364 static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio)
2365 {
2366 struct mv_host_priv *hpriv = host->private_data;
2367 u32 tmp;
2368
2369 tmp = readl(mmio + MV_PCI_MODE_OFS);
2370 tmp &= 0xff00ffff;
2371 writel(tmp, mmio + MV_PCI_MODE_OFS);
2372
2373 ZERO(MV_PCI_DISC_TIMER);
2374 ZERO(MV_PCI_MSI_TRIGGER);
2375 writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT_OFS);
2376 ZERO(PCI_HC_MAIN_IRQ_MASK_OFS);
2377 ZERO(MV_PCI_SERR_MASK);
2378 ZERO(hpriv->irq_cause_ofs);
2379 ZERO(hpriv->irq_mask_ofs);
2380 ZERO(MV_PCI_ERR_LOW_ADDRESS);
2381 ZERO(MV_PCI_ERR_HIGH_ADDRESS);
2382 ZERO(MV_PCI_ERR_ATTRIBUTE);
2383 ZERO(MV_PCI_ERR_COMMAND);
2384 }
2385 #undef ZERO
2386
2387 static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
2388 {
2389 u32 tmp;
2390
2391 mv5_reset_flash(hpriv, mmio);
2392
2393 tmp = readl(mmio + MV_GPIO_PORT_CTL_OFS);
2394 tmp &= 0x3;
2395 tmp |= (1 << 5) | (1 << 6);
2396 writel(tmp, mmio + MV_GPIO_PORT_CTL_OFS);
2397 }
2398
2399 /**
2400 * mv6_reset_hc - Perform the 6xxx global soft reset
2401 * @mmio: base address of the HBA
2402 *
2403 * This routine only applies to 6xxx parts.
2404 *
2405 * LOCKING:
2406 * Inherited from caller.
2407 */
2408 static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
2409 unsigned int n_hc)
2410 {
2411 void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS;
2412 int i, rc = 0;
2413 u32 t;
2414
2415 /* Following procedure defined in PCI "main command and status
2416 * register" table.
2417 */
2418 t = readl(reg);
2419 writel(t | STOP_PCI_MASTER, reg);
2420
2421 for (i = 0; i < 1000; i++) {
2422 udelay(1);
2423 t = readl(reg);
2424 if (PCI_MASTER_EMPTY & t)
2425 break;
2426 }
2427 if (!(PCI_MASTER_EMPTY & t)) {
2428 printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
2429 rc = 1;
2430 goto done;
2431 }
2432
2433 /* set reset */
2434 i = 5;
2435 do {
2436 writel(t | GLOB_SFT_RST, reg);
2437 t = readl(reg);
2438 udelay(1);
2439 } while (!(GLOB_SFT_RST & t) && (i-- > 0));
2440
2441 if (!(GLOB_SFT_RST & t)) {
2442 printk(KERN_ERR DRV_NAME ": can't set global reset\n");
2443 rc = 1;
2444 goto done;
2445 }
2446
2447 /* clear reset and *reenable the PCI master* (not mentioned in spec) */
2448 i = 5;
2449 do {
2450 writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
2451 t = readl(reg);
2452 udelay(1);
2453 } while ((GLOB_SFT_RST & t) && (i-- > 0));
2454
2455 if (GLOB_SFT_RST & t) {
2456 printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
2457 rc = 1;
2458 }
2459 done:
2460 return rc;
2461 }
2462
2463 static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
2464 void __iomem *mmio)
2465 {
2466 void __iomem *port_mmio;
2467 u32 tmp;
2468
2469 tmp = readl(mmio + MV_RESET_CFG_OFS);
2470 if ((tmp & (1 << 0)) == 0) {
2471 hpriv->signal[idx].amps = 0x7 << 8;
2472 hpriv->signal[idx].pre = 0x1 << 5;
2473 return;
2474 }
2475
2476 port_mmio = mv_port_base(mmio, idx);
2477 tmp = readl(port_mmio + PHY_MODE2);
2478
2479 hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
2480 hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
2481 }
2482
2483 static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
2484 {
2485 writel(0x00000060, mmio + MV_GPIO_PORT_CTL_OFS);
2486 }
2487
2488 static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
2489 unsigned int port)
2490 {
2491 void __iomem *port_mmio = mv_port_base(mmio, port);
2492
2493 u32 hp_flags = hpriv->hp_flags;
2494 int fix_phy_mode2 =
2495 hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
2496 int fix_phy_mode4 =
2497 hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
2498 u32 m2, tmp;
2499
2500 if (fix_phy_mode2) {
2501 m2 = readl(port_mmio + PHY_MODE2);
2502 m2 &= ~(1 << 16);
2503 m2 |= (1 << 31);
2504 writel(m2, port_mmio + PHY_MODE2);
2505
2506 udelay(200);
2507
2508 m2 = readl(port_mmio + PHY_MODE2);
2509 m2 &= ~((1 << 16) | (1 << 31));
2510 writel(m2, port_mmio + PHY_MODE2);
2511
2512 udelay(200);
2513 }
2514
2515 /* who knows what this magic does */
2516 tmp = readl(port_mmio + PHY_MODE3);
2517 tmp &= ~0x7F800000;
2518 tmp |= 0x2A800000;
2519 writel(tmp, port_mmio + PHY_MODE3);
2520
2521 if (fix_phy_mode4) {
2522 u32 m4;
2523
2524 m4 = readl(port_mmio + PHY_MODE4);
2525
2526 if (hp_flags & MV_HP_ERRATA_60X1B2)
2527 tmp = readl(port_mmio + PHY_MODE3);
2528
2529 /* workaround for errata FEr SATA#10 (part 1) */
2530 m4 = (m4 & ~(1 << 1)) | (1 << 0);
2531
2532 writel(m4, port_mmio + PHY_MODE4);
2533
2534 if (hp_flags & MV_HP_ERRATA_60X1B2)
2535 writel(tmp, port_mmio + PHY_MODE3);
2536 }
2537
2538 /* Revert values of pre-emphasis and signal amps to the saved ones */
2539 m2 = readl(port_mmio + PHY_MODE2);
2540
2541 m2 &= ~MV_M2_PREAMP_MASK;
2542 m2 |= hpriv->signal[port].amps;
2543 m2 |= hpriv->signal[port].pre;
2544 m2 &= ~(1 << 16);
2545
2546 /* according to mvSata 3.6.1, some IIE values are fixed */
2547 if (IS_GEN_IIE(hpriv)) {
2548 m2 &= ~0xC30FF01F;
2549 m2 |= 0x0000900F;
2550 }
2551
2552 writel(m2, port_mmio + PHY_MODE2);
2553 }
2554
2555 /* TODO: use the generic LED interface to configure the SATA Presence */
2556 /* & Acitivy LEDs on the board */
2557 static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
2558 void __iomem *mmio)
2559 {
2560 return;
2561 }
2562
2563 static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
2564 void __iomem *mmio)
2565 {
2566 void __iomem *port_mmio;
2567 u32 tmp;
2568
2569 port_mmio = mv_port_base(mmio, idx);
2570 tmp = readl(port_mmio + PHY_MODE2);
2571
2572 hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
2573 hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
2574 }
2575
2576 #undef ZERO
2577 #define ZERO(reg) writel(0, port_mmio + (reg))
2578 static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
2579 void __iomem *mmio, unsigned int port)
2580 {
2581 void __iomem *port_mmio = mv_port_base(mmio, port);
2582
2583 mv_reset_channel(hpriv, mmio, port);
2584
2585 ZERO(0x028); /* command */
2586 writel(0x101f, port_mmio + EDMA_CFG_OFS);
2587 ZERO(0x004); /* timer */
2588 ZERO(0x008); /* irq err cause */
2589 ZERO(0x00c); /* irq err mask */
2590 ZERO(0x010); /* rq bah */
2591 ZERO(0x014); /* rq inp */
2592 ZERO(0x018); /* rq outp */
2593 ZERO(0x01c); /* respq bah */
2594 ZERO(0x024); /* respq outp */
2595 ZERO(0x020); /* respq inp */
2596 ZERO(0x02c); /* test control */
2597 writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
2598 }
2599
2600 #undef ZERO
2601
2602 #define ZERO(reg) writel(0, hc_mmio + (reg))
2603 static void mv_soc_reset_one_hc(struct mv_host_priv *hpriv,
2604 void __iomem *mmio)
2605 {
2606 void __iomem *hc_mmio = mv_hc_base(mmio, 0);
2607
2608 ZERO(0x00c);
2609 ZERO(0x010);
2610 ZERO(0x014);
2611
2612 }
2613
2614 #undef ZERO
2615
2616 static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
2617 void __iomem *mmio, unsigned int n_hc)
2618 {
2619 unsigned int port;
2620
2621 for (port = 0; port < hpriv->n_ports; port++)
2622 mv_soc_reset_hc_port(hpriv, mmio, port);
2623
2624 mv_soc_reset_one_hc(hpriv, mmio);
2625
2626 return 0;
2627 }
2628
2629 static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
2630 void __iomem *mmio)
2631 {
2632 return;
2633 }
2634
2635 static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
2636 {
2637 return;
2638 }
2639
2640 static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
2641 {
2642 u32 ifcfg = readl(port_mmio + SATA_INTERFACE_CFG_OFS);
2643
2644 ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */
2645 if (want_gen2i)
2646 ifcfg |= (1 << 7); /* enable gen2i speed */
2647 writelfl(ifcfg, port_mmio + SATA_INTERFACE_CFG_OFS);
2648 }
2649
2650 static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
2651 unsigned int port_no)
2652 {
2653 void __iomem *port_mmio = mv_port_base(mmio, port_no);
2654
2655 /*
2656 * The datasheet warns against setting EDMA_RESET when EDMA is active
2657 * (but doesn't say what the problem might be). So we first try
2658 * to disable the EDMA engine before doing the EDMA_RESET operation.
2659 */
2660 mv_stop_edma_engine(port_mmio);
2661 writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
2662
2663 if (!IS_GEN_I(hpriv)) {
2664 /* Enable 3.0gb/s link speed: this survives EDMA_RESET */
2665 mv_setup_ifcfg(port_mmio, 1);
2666 }
2667 /*
2668 * Strobing EDMA_RESET here causes a hard reset of the SATA transport,
2669 * link, and physical layers. It resets all SATA interface registers
2670 * (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev.
2671 */
2672 writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
2673 udelay(25); /* allow reset propagation */
2674 writelfl(0, port_mmio + EDMA_CMD_OFS);
2675
2676 hpriv->ops->phy_errata(hpriv, mmio, port_no);
2677
2678 if (IS_GEN_I(hpriv))
2679 mdelay(1);
2680 }
2681
2682 static void mv_pmp_select(struct ata_port *ap, int pmp)
2683 {
2684 if (sata_pmp_supported(ap)) {
2685 void __iomem *port_mmio = mv_ap_base(ap);
2686 u32 reg = readl(port_mmio + SATA_IFCTL_OFS);
2687 int old = reg & 0xf;
2688
2689 if (old != pmp) {
2690 reg = (reg & ~0xf) | pmp;
2691 writelfl(reg, port_mmio + SATA_IFCTL_OFS);
2692 }
2693 }
2694 }
2695
2696 static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
2697 unsigned long deadline)
2698 {
2699 mv_pmp_select(link->ap, sata_srst_pmp(link));
2700 return sata_std_hardreset(link, class, deadline);
2701 }
2702
2703 static int mv_softreset(struct ata_link *link, unsigned int *class,
2704 unsigned long deadline)
2705 {
2706 mv_pmp_select(link->ap, sata_srst_pmp(link));
2707 return ata_sff_softreset(link, class, deadline);
2708 }
2709
2710 static int mv_hardreset(struct ata_link *link, unsigned int *class,
2711 unsigned long deadline)
2712 {
2713 struct ata_port *ap = link->ap;
2714 struct mv_host_priv *hpriv = ap->host->private_data;
2715 struct mv_port_priv *pp = ap->private_data;
2716 void __iomem *mmio = hpriv->base;
2717 int rc, attempts = 0, extra = 0;
2718 u32 sstatus;
2719 bool online;
2720
2721 mv_reset_channel(hpriv, mmio, ap->port_no);
2722 pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
2723
2724 /* Workaround for errata FEr SATA#10 (part 2) */
2725 do {
2726 const unsigned long *timing =
2727 sata_ehc_deb_timing(&link->eh_context);
2728
2729 rc = sata_link_hardreset(link, timing, deadline + extra,
2730 &online, NULL);
2731 if (rc)
2732 return rc;
2733 sata_scr_read(link, SCR_STATUS, &sstatus);
2734 if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
2735 /* Force 1.5gb/s link speed and try again */
2736 mv_setup_ifcfg(mv_ap_base(ap), 0);
2737 if (time_after(jiffies + HZ, deadline))
2738 extra = HZ; /* only extend it once, max */
2739 }
2740 } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
2741
2742 return rc;
2743 }
2744
2745 static void mv_eh_freeze(struct ata_port *ap)
2746 {
2747 struct mv_host_priv *hpriv = ap->host->private_data;
2748 unsigned int shift, hardport, port = ap->port_no;
2749 u32 main_irq_mask;
2750
2751 /* FIXME: handle coalescing completion events properly */
2752
2753 mv_stop_edma(ap);
2754 MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
2755
2756 /* disable assertion of portN err, done events */
2757 main_irq_mask = readl(hpriv->main_irq_mask_addr);
2758 main_irq_mask &= ~((DONE_IRQ | ERR_IRQ) << shift);
2759 writelfl(main_irq_mask, hpriv->main_irq_mask_addr);
2760 }
2761
2762 static void mv_eh_thaw(struct ata_port *ap)
2763 {
2764 struct mv_host_priv *hpriv = ap->host->private_data;
2765 unsigned int shift, hardport, port = ap->port_no;
2766 void __iomem *hc_mmio = mv_hc_base_from_port(hpriv->base, port);
2767 void __iomem *port_mmio = mv_ap_base(ap);
2768 u32 main_irq_mask, hc_irq_cause;
2769
2770 /* FIXME: handle coalescing completion events properly */
2771
2772 MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
2773
2774 /* clear EDMA errors on this port */
2775 writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
2776
2777 /* clear pending irq events */
2778 hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
2779 hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
2780 writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
2781
2782 /* enable assertion of portN err, done events */
2783 main_irq_mask = readl(hpriv->main_irq_mask_addr);
2784 main_irq_mask |= ((DONE_IRQ | ERR_IRQ) << shift);
2785 writelfl(main_irq_mask, hpriv->main_irq_mask_addr);
2786 }
2787
2788 /**
2789 * mv_port_init - Perform some early initialization on a single port.
2790 * @port: libata data structure storing shadow register addresses
2791 * @port_mmio: base address of the port
2792 *
2793 * Initialize shadow register mmio addresses, clear outstanding
2794 * interrupts on the port, and unmask interrupts for the future
2795 * start of the port.
2796 *
2797 * LOCKING:
2798 * Inherited from caller.
2799 */
2800 static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
2801 {
2802 void __iomem *shd_base = port_mmio + SHD_BLK_OFS;
2803 unsigned serr_ofs;
2804
2805 /* PIO related setup
2806 */
2807 port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA);
2808 port->error_addr =
2809 port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR);
2810 port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT);
2811 port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL);
2812 port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM);
2813 port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH);
2814 port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE);
2815 port->status_addr =
2816 port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
2817 /* special case: control/altstatus doesn't have ATA_REG_ address */
2818 port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
2819
2820 /* unused: */
2821 port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL;
2822
2823 /* Clear any currently outstanding port interrupt conditions */
2824 serr_ofs = mv_scr_offset(SCR_ERROR);
2825 writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
2826 writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
2827
2828 /* unmask all non-transient EDMA error interrupts */
2829 writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
2830
2831 VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
2832 readl(port_mmio + EDMA_CFG_OFS),
2833 readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS),
2834 readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
2835 }
2836
2837 static unsigned int mv_in_pcix_mode(struct ata_host *host)
2838 {
2839 struct mv_host_priv *hpriv = host->private_data;
2840 void __iomem *mmio = hpriv->base;
2841 u32 reg;
2842
2843 if (!HAS_PCI(host) || !IS_PCIE(hpriv))
2844 return 0; /* not PCI-X capable */
2845 reg = readl(mmio + MV_PCI_MODE_OFS);
2846 if ((reg & MV_PCI_MODE_MASK) == 0)
2847 return 0; /* conventional PCI mode */
2848 return 1; /* chip is in PCI-X mode */
2849 }
2850
2851 static int mv_pci_cut_through_okay(struct ata_host *host)
2852 {
2853 struct mv_host_priv *hpriv = host->private_data;
2854 void __iomem *mmio = hpriv->base;
2855 u32 reg;
2856
2857 if (!mv_in_pcix_mode(host)) {
2858 reg = readl(mmio + PCI_COMMAND_OFS);
2859 if (reg & PCI_COMMAND_MRDTRIG)
2860 return 0; /* not okay */
2861 }
2862 return 1; /* okay */
2863 }
2864
2865 static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
2866 {
2867 struct pci_dev *pdev = to_pci_dev(host->dev);
2868 struct mv_host_priv *hpriv = host->private_data;
2869 u32 hp_flags = hpriv->hp_flags;
2870
2871 switch (board_idx) {
2872 case chip_5080:
2873 hpriv->ops = &mv5xxx_ops;
2874 hp_flags |= MV_HP_GEN_I;
2875
2876 switch (pdev->revision) {
2877 case 0x1:
2878 hp_flags |= MV_HP_ERRATA_50XXB0;
2879 break;
2880 case 0x3:
2881 hp_flags |= MV_HP_ERRATA_50XXB2;
2882 break;
2883 default:
2884 dev_printk(KERN_WARNING, &pdev->dev,
2885 "Applying 50XXB2 workarounds to unknown rev\n");
2886 hp_flags |= MV_HP_ERRATA_50XXB2;
2887 break;
2888 }
2889 break;
2890
2891 case chip_504x:
2892 case chip_508x:
2893 hpriv->ops = &mv5xxx_ops;
2894 hp_flags |= MV_HP_GEN_I;
2895
2896 switch (pdev->revision) {
2897 case 0x0:
2898 hp_flags |= MV_HP_ERRATA_50XXB0;
2899 break;
2900 case 0x3:
2901 hp_flags |= MV_HP_ERRATA_50XXB2;
2902 break;
2903 default:
2904 dev_printk(KERN_WARNING, &pdev->dev,
2905 "Applying B2 workarounds to unknown rev\n");
2906 hp_flags |= MV_HP_ERRATA_50XXB2;
2907 break;
2908 }
2909 break;
2910
2911 case chip_604x:
2912 case chip_608x:
2913 hpriv->ops = &mv6xxx_ops;
2914 hp_flags |= MV_HP_GEN_II;
2915
2916 switch (pdev->revision) {
2917 case 0x7:
2918 hp_flags |= MV_HP_ERRATA_60X1B2;
2919 break;
2920 case 0x9:
2921 hp_flags |= MV_HP_ERRATA_60X1C0;
2922 break;
2923 default:
2924 dev_printk(KERN_WARNING, &pdev->dev,
2925 "Applying B2 workarounds to unknown rev\n");
2926 hp_flags |= MV_HP_ERRATA_60X1B2;
2927 break;
2928 }
2929 break;
2930
2931 case chip_7042:
2932 hp_flags |= MV_HP_PCIE | MV_HP_CUT_THROUGH;
2933 if (pdev->vendor == PCI_VENDOR_ID_TTI &&
2934 (pdev->device == 0x2300 || pdev->device == 0x2310))
2935 {
2936 /*
2937 * Highpoint RocketRAID PCIe 23xx series cards:
2938 *
2939 * Unconfigured drives are treated as "Legacy"
2940 * by the BIOS, and it overwrites sector 8 with
2941 * a "Lgcy" metadata block prior to Linux boot.
2942 *
2943 * Configured drives (RAID or JBOD) leave sector 8
2944 * alone, but instead overwrite a high numbered
2945 * sector for the RAID metadata. This sector can
2946 * be determined exactly, by truncating the physical
2947 * drive capacity to a nice even GB value.
2948 *
2949 * RAID metadata is at: (dev->n_sectors & ~0xfffff)
2950 *
2951 * Warn the user, lest they think we're just buggy.
2952 */
2953 printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID"
2954 " BIOS CORRUPTS DATA on all attached drives,"
2955 " regardless of if/how they are configured."
2956 " BEWARE!\n");
2957 printk(KERN_WARNING DRV_NAME ": For data safety, do not"
2958 " use sectors 8-9 on \"Legacy\" drives,"
2959 " and avoid the final two gigabytes on"
2960 " all RocketRAID BIOS initialized drives.\n");
2961 }
2962 /* drop through */
2963 case chip_6042:
2964 hpriv->ops = &mv6xxx_ops;
2965 hp_flags |= MV_HP_GEN_IIE;
2966 if (board_idx == chip_6042 && mv_pci_cut_through_okay(host))
2967 hp_flags |= MV_HP_CUT_THROUGH;
2968
2969 switch (pdev->revision) {
2970 case 0x0:
2971 hp_flags |= MV_HP_ERRATA_XX42A0;
2972 break;
2973 case 0x1:
2974 hp_flags |= MV_HP_ERRATA_60X1C0;
2975 break;
2976 default:
2977 dev_printk(KERN_WARNING, &pdev->dev,
2978 "Applying 60X1C0 workarounds to unknown rev\n");
2979 hp_flags |= MV_HP_ERRATA_60X1C0;
2980 break;
2981 }
2982 break;
2983 case chip_soc:
2984 hpriv->ops = &mv_soc_ops;
2985 hp_flags |= MV_HP_ERRATA_60X1C0;
2986 break;
2987
2988 default:
2989 dev_printk(KERN_ERR, host->dev,
2990 "BUG: invalid board index %u\n", board_idx);
2991 return 1;
2992 }
2993
2994 hpriv->hp_flags = hp_flags;
2995 if (hp_flags & MV_HP_PCIE) {
2996 hpriv->irq_cause_ofs = PCIE_IRQ_CAUSE_OFS;
2997 hpriv->irq_mask_ofs = PCIE_IRQ_MASK_OFS;
2998 hpriv->unmask_all_irqs = PCIE_UNMASK_ALL_IRQS;
2999 } else {
3000 hpriv->irq_cause_ofs = PCI_IRQ_CAUSE_OFS;
3001 hpriv->irq_mask_ofs = PCI_IRQ_MASK_OFS;
3002 hpriv->unmask_all_irqs = PCI_UNMASK_ALL_IRQS;
3003 }
3004
3005 return 0;
3006 }
3007
3008 /**
3009 * mv_init_host - Perform some early initialization of the host.
3010 * @host: ATA host to initialize
3011 * @board_idx: controller index
3012 *
3013 * If possible, do an early global reset of the host. Then do
3014 * our port init and clear/unmask all/relevant host interrupts.
3015 *
3016 * LOCKING:
3017 * Inherited from caller.
3018 */
3019 static int mv_init_host(struct ata_host *host, unsigned int board_idx)
3020 {
3021 int rc = 0, n_hc, port, hc;
3022 struct mv_host_priv *hpriv = host->private_data;
3023 void __iomem *mmio = hpriv->base;
3024
3025 rc = mv_chip_id(host, board_idx);
3026 if (rc)
3027 goto done;
3028
3029 if (HAS_PCI(host)) {
3030 hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
3031 hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
3032 } else {
3033 hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
3034 hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
3035 }
3036
3037 /* global interrupt mask: 0 == mask everything */
3038 writel(0, hpriv->main_irq_mask_addr);
3039
3040 n_hc = mv_get_hc_count(host->ports[0]->flags);
3041
3042 for (port = 0; port < host->n_ports; port++)
3043 hpriv->ops->read_preamp(hpriv, port, mmio);
3044
3045 rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
3046 if (rc)
3047 goto done;
3048
3049 hpriv->ops->reset_flash(hpriv, mmio);
3050 hpriv->ops->reset_bus(host, mmio);
3051 hpriv->ops->enable_leds(hpriv, mmio);
3052
3053 for (port = 0; port < host->n_ports; port++) {
3054 struct ata_port *ap = host->ports[port];
3055 void __iomem *port_mmio = mv_port_base(mmio, port);
3056
3057 mv_port_init(&ap->ioaddr, port_mmio);
3058
3059 #ifdef CONFIG_PCI
3060 if (HAS_PCI(host)) {
3061 unsigned int offset = port_mmio - mmio;
3062 ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
3063 ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
3064 }
3065 #endif
3066 }
3067
3068 for (hc = 0; hc < n_hc; hc++) {
3069 void __iomem *hc_mmio = mv_hc_base(mmio, hc);
3070
3071 VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
3072 "(before clear)=0x%08x\n", hc,
3073 readl(hc_mmio + HC_CFG_OFS),
3074 readl(hc_mmio + HC_IRQ_CAUSE_OFS));
3075
3076 /* Clear any currently outstanding hc interrupt conditions */
3077 writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
3078 }
3079
3080 if (HAS_PCI(host)) {
3081 /* Clear any currently outstanding host interrupt conditions */
3082 writelfl(0, mmio + hpriv->irq_cause_ofs);
3083
3084 /* and unmask interrupt generation for host regs */
3085 writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
3086 if (IS_GEN_I(hpriv))
3087 writelfl(~HC_MAIN_MASKED_IRQS_5,
3088 hpriv->main_irq_mask_addr);
3089 else
3090 writelfl(~HC_MAIN_MASKED_IRQS,
3091 hpriv->main_irq_mask_addr);
3092
3093 VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
3094 "PCI int cause/mask=0x%08x/0x%08x\n",
3095 readl(hpriv->main_irq_cause_addr),
3096 readl(hpriv->main_irq_mask_addr),
3097 readl(mmio + hpriv->irq_cause_ofs),
3098 readl(mmio + hpriv->irq_mask_ofs));
3099 } else {
3100 writelfl(~HC_MAIN_MASKED_IRQS_SOC,
3101 hpriv->main_irq_mask_addr);
3102 VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x\n",
3103 readl(hpriv->main_irq_cause_addr),
3104 readl(hpriv->main_irq_mask_addr));
3105 }
3106 done:
3107 return rc;
3108 }
3109
3110 static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
3111 {
3112 hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ,
3113 MV_CRQB_Q_SZ, 0);
3114 if (!hpriv->crqb_pool)
3115 return -ENOMEM;
3116
3117 hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ,
3118 MV_CRPB_Q_SZ, 0);
3119 if (!hpriv->crpb_pool)
3120 return -ENOMEM;
3121
3122 hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ,
3123 MV_SG_TBL_SZ, 0);
3124 if (!hpriv->sg_tbl_pool)
3125 return -ENOMEM;
3126
3127 return 0;
3128 }
3129
3130 static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
3131 struct mbus_dram_target_info *dram)
3132 {
3133 int i;
3134
3135 for (i = 0; i < 4; i++) {
3136 writel(0, hpriv->base + WINDOW_CTRL(i));
3137 writel(0, hpriv->base + WINDOW_BASE(i));
3138 }
3139
3140 for (i = 0; i < dram->num_cs; i++) {
3141 struct mbus_dram_window *cs = dram->cs + i;
3142
3143 writel(((cs->size - 1) & 0xffff0000) |
3144 (cs->mbus_attr << 8) |
3145 (dram->mbus_dram_target_id << 4) | 1,
3146 hpriv->base + WINDOW_CTRL(i));
3147 writel(cs->base, hpriv->base + WINDOW_BASE(i));
3148 }
3149 }
3150
3151 /**
3152 * mv_platform_probe - handle a positive probe of an soc Marvell
3153 * host
3154 * @pdev: platform device found
3155 *
3156 * LOCKING:
3157 * Inherited from caller.
3158 */
3159 static int mv_platform_probe(struct platform_device *pdev)
3160 {
3161 static int printed_version;
3162 const struct mv_sata_platform_data *mv_platform_data;
3163 const struct ata_port_info *ppi[] =
3164 { &mv_port_info[chip_soc], NULL };
3165 struct ata_host *host;
3166 struct mv_host_priv *hpriv;
3167 struct resource *res;
3168 int n_ports, rc;
3169
3170 if (!printed_version++)
3171 dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
3172
3173 /*
3174 * Simple resource validation ..
3175 */
3176 if (unlikely(pdev->num_resources != 2)) {
3177 dev_err(&pdev->dev, "invalid number of resources\n");
3178 return -EINVAL;
3179 }
3180
3181 /*
3182 * Get the register base first
3183 */
3184 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
3185 if (res == NULL)
3186 return -EINVAL;
3187
3188 /* allocate host */
3189 mv_platform_data = pdev->dev.platform_data;
3190 n_ports = mv_platform_data->n_ports;
3191
3192 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
3193 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
3194
3195 if (!host || !hpriv)
3196 return -ENOMEM;
3197 host->private_data = hpriv;
3198 hpriv->n_ports = n_ports;
3199
3200 host->iomap = NULL;
3201 hpriv->base = devm_ioremap(&pdev->dev, res->start,
3202 res->end - res->start + 1);
3203 hpriv->base -= MV_SATAHC0_REG_BASE;
3204
3205 /*
3206 * (Re-)program MBUS remapping windows if we are asked to.
3207 */
3208 if (mv_platform_data->dram != NULL)
3209 mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
3210
3211 rc = mv_create_dma_pools(hpriv, &pdev->dev);
3212 if (rc)
3213 return rc;
3214
3215 /* initialize adapter */
3216 rc = mv_init_host(host, chip_soc);
3217 if (rc)
3218 return rc;
3219
3220 dev_printk(KERN_INFO, &pdev->dev,
3221 "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH,
3222 host->n_ports);
3223
3224 return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
3225 IRQF_SHARED, &mv6_sht);
3226 }
3227
3228 /*
3229 *
3230 * mv_platform_remove - unplug a platform interface
3231 * @pdev: platform device
3232 *
3233 * A platform bus SATA device has been unplugged. Perform the needed
3234 * cleanup. Also called on module unload for any active devices.
3235 */
3236 static int __devexit mv_platform_remove(struct platform_device *pdev)
3237 {
3238 struct device *dev = &pdev->dev;
3239 struct ata_host *host = dev_get_drvdata(dev);
3240
3241 ata_host_detach(host);
3242 return 0;
3243 }
3244
3245 static struct platform_driver mv_platform_driver = {
3246 .probe = mv_platform_probe,
3247 .remove = __devexit_p(mv_platform_remove),
3248 .driver = {
3249 .name = DRV_NAME,
3250 .owner = THIS_MODULE,
3251 },
3252 };
3253
3254
3255 #ifdef CONFIG_PCI
3256 static int mv_pci_init_one(struct pci_dev *pdev,
3257 const struct pci_device_id *ent);
3258
3259
3260 static struct pci_driver mv_pci_driver = {
3261 .name = DRV_NAME,
3262 .id_table = mv_pci_tbl,
3263 .probe = mv_pci_init_one,
3264 .remove = ata_pci_remove_one,
3265 };
3266
3267 /*
3268 * module options
3269 */
3270 static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
3271
3272
3273 /* move to PCI layer or libata core? */
3274 static int pci_go_64(struct pci_dev *pdev)
3275 {
3276 int rc;
3277
3278 if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
3279 rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
3280 if (rc) {
3281 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
3282 if (rc) {
3283 dev_printk(KERN_ERR, &pdev->dev,
3284 "64-bit DMA enable failed\n");
3285 return rc;
3286 }
3287 }
3288 } else {
3289 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
3290 if (rc) {
3291 dev_printk(KERN_ERR, &pdev->dev,
3292 "32-bit DMA enable failed\n");
3293 return rc;
3294 }
3295 rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
3296 if (rc) {
3297 dev_printk(KERN_ERR, &pdev->dev,
3298 "32-bit consistent DMA enable failed\n");
3299 return rc;
3300 }
3301 }
3302
3303 return rc;
3304 }
3305
3306 /**
3307 * mv_print_info - Dump key info to kernel log for perusal.
3308 * @host: ATA host to print info about
3309 *
3310 * FIXME: complete this.
3311 *
3312 * LOCKING:
3313 * Inherited from caller.
3314 */
3315 static void mv_print_info(struct ata_host *host)
3316 {
3317 struct pci_dev *pdev = to_pci_dev(host->dev);
3318 struct mv_host_priv *hpriv = host->private_data;
3319 u8 scc;
3320 const char *scc_s, *gen;
3321
3322 /* Use this to determine the HW stepping of the chip so we know
3323 * what errata to workaround
3324 */
3325 pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
3326 if (scc == 0)
3327 scc_s = "SCSI";
3328 else if (scc == 0x01)
3329 scc_s = "RAID";
3330 else
3331 scc_s = "?";
3332
3333 if (IS_GEN_I(hpriv))
3334 gen = "I";
3335 else if (IS_GEN_II(hpriv))
3336 gen = "II";
3337 else if (IS_GEN_IIE(hpriv))
3338 gen = "IIE";
3339 else
3340 gen = "?";
3341
3342 dev_printk(KERN_INFO, &pdev->dev,
3343 "Gen-%s %u slots %u ports %s mode IRQ via %s\n",
3344 gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
3345 scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
3346 }
3347
3348 /**
3349 * mv_pci_init_one - handle a positive probe of a PCI Marvell host
3350 * @pdev: PCI device found
3351 * @ent: PCI device ID entry for the matched host
3352 *
3353 * LOCKING:
3354 * Inherited from caller.
3355 */
3356 static int mv_pci_init_one(struct pci_dev *pdev,
3357 const struct pci_device_id *ent)
3358 {
3359 static int printed_version;
3360 unsigned int board_idx = (unsigned int)ent->driver_data;
3361 const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
3362 struct ata_host *host;
3363 struct mv_host_priv *hpriv;
3364 int n_ports, rc;
3365
3366 if (!printed_version++)
3367 dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
3368
3369 /* allocate host */
3370 n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC;
3371
3372 host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
3373 hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
3374 if (!host || !hpriv)
3375 return -ENOMEM;
3376 host->private_data = hpriv;
3377 hpriv->n_ports = n_ports;
3378
3379 /* acquire resources */
3380 rc = pcim_enable_device(pdev);
3381 if (rc)
3382 return rc;
3383
3384 rc = pcim_iomap_regions(pdev, 1 << MV_PRIMARY_BAR, DRV_NAME);
3385 if (rc == -EBUSY)
3386 pcim_pin_device(pdev);
3387 if (rc)
3388 return rc;
3389 host->iomap = pcim_iomap_table(pdev);
3390 hpriv->base = host->iomap[MV_PRIMARY_BAR];
3391
3392 rc = pci_go_64(pdev);
3393 if (rc)
3394 return rc;
3395
3396 rc = mv_create_dma_pools(hpriv, &pdev->dev);
3397 if (rc)
3398 return rc;
3399
3400 /* initialize adapter */
3401 rc = mv_init_host(host, board_idx);
3402 if (rc)
3403 return rc;
3404
3405 /* Enable interrupts */
3406 if (msi && pci_enable_msi(pdev))
3407 pci_intx(pdev, 1);
3408
3409 mv_dump_pci_cfg(pdev, 0x68);
3410 mv_print_info(host);
3411
3412 pci_set_master(pdev);
3413 pci_try_set_mwi(pdev);
3414 return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
3415 IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
3416 }
3417 #endif
3418
3419 static int mv_platform_probe(struct platform_device *pdev);
3420 static int __devexit mv_platform_remove(struct platform_device *pdev);
3421
3422 static int __init mv_init(void)
3423 {
3424 int rc = -ENODEV;
3425 #ifdef CONFIG_PCI
3426 rc = pci_register_driver(&mv_pci_driver);
3427 if (rc < 0)
3428 return rc;
3429 #endif
3430 rc = platform_driver_register(&mv_platform_driver);
3431
3432 #ifdef CONFIG_PCI
3433 if (rc < 0)
3434 pci_unregister_driver(&mv_pci_driver);
3435 #endif
3436 return rc;
3437 }
3438
3439 static void __exit mv_exit(void)
3440 {
3441 #ifdef CONFIG_PCI
3442 pci_unregister_driver(&mv_pci_driver);
3443 #endif
3444 platform_driver_unregister(&mv_platform_driver);
3445 }
3446
3447 MODULE_AUTHOR("Brett Russ");
3448 MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
3449 MODULE_LICENSE("GPL");
3450 MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
3451 MODULE_VERSION(DRV_VERSION);
3452 MODULE_ALIAS("platform:" DRV_NAME);
3453
3454 #ifdef CONFIG_PCI
3455 module_param(msi, int, 0444);
3456 MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
3457 #endif
3458
3459 module_init(mv_init);
3460 module_exit(mv_exit);
Linux with added FPC-III support