drivers/rtc/rtc-twl4030.c

   1 /*
   2  * rtc-twl4030.c -- TWL4030 Real Time Clock interface
   3  *
   4  * Copyright (C) 2007 MontaVista Software, Inc
   5  * Author: Alexandre Rusev <source@mvista.com>
   6  *
   7  * Based on original TI driver twl4030-rtc.c
   8  *   Copyright (C) 2006 Texas Instruments, Inc.
   9  *
  10  * Based on rtc-omap.c
  11  *   Copyright (C) 2003 MontaVista Software, Inc.
  12  *   Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
  13  *   Copyright (C) 2006 David Brownell
  14  *
  15  * This program is free software; you can redistribute it and/or
  16  * modify it under the terms of the GNU General Public License
  17  * as published by the Free Software Foundation; either version
  18  * 2 of the License, or (at your option) any later version.
  19  */
  20
  21 #include <linux/kernel.h>
  22 #include <linux/errno.h>
  23 #include <linux/init.h>
  24 #include <linux/module.h>
  25 #include <linux/types.h>
  26 #include <linux/rtc.h>
  27 #include <linux/bcd.h>
  28 #include <linux/platform_device.h>
  29 #include <linux/interrupt.h>
  30
  31 #include <linux/i2c/twl4030.h>
  32
  33
  34 /*
  35  * RTC block register offsets (use TWL_MODULE_RTC)
  36  */
  37 #define REG_SECONDS_REG                          0x00
  38 #define REG_MINUTES_REG                          0x01
  39 #define REG_HOURS_REG                            0x02
  40 #define REG_DAYS_REG                             0x03
  41 #define REG_MONTHS_REG                           0x04
  42 #define REG_YEARS_REG                            0x05
  43 #define REG_WEEKS_REG                            0x06
  44
  45 #define REG_ALARM_SECONDS_REG                    0x07
  46 #define REG_ALARM_MINUTES_REG                    0x08
  47 #define REG_ALARM_HOURS_REG                      0x09
  48 #define REG_ALARM_DAYS_REG                       0x0A
  49 #define REG_ALARM_MONTHS_REG                     0x0B
  50 #define REG_ALARM_YEARS_REG                      0x0C
  51
  52 #define REG_RTC_CTRL_REG                         0x0D
  53 #define REG_RTC_STATUS_REG                       0x0E
  54 #define REG_RTC_INTERRUPTS_REG                   0x0F
  55
  56 #define REG_RTC_COMP_LSB_REG                     0x10
  57 #define REG_RTC_COMP_MSB_REG                     0x11
  58
  59 /* RTC_CTRL_REG bitfields */
  60 #define BIT_RTC_CTRL_REG_STOP_RTC_M              0x01
  61 #define BIT_RTC_CTRL_REG_ROUND_30S_M             0x02
  62 #define BIT_RTC_CTRL_REG_AUTO_COMP_M             0x04
  63 #define BIT_RTC_CTRL_REG_MODE_12_24_M            0x08
  64 #define BIT_RTC_CTRL_REG_TEST_MODE_M             0x10
  65 #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M        0x20
  66 #define BIT_RTC_CTRL_REG_GET_TIME_M              0x40
  67
  68 /* RTC_STATUS_REG bitfields */
  69 #define BIT_RTC_STATUS_REG_RUN_M                 0x02
  70 #define BIT_RTC_STATUS_REG_1S_EVENT_M            0x04
  71 #define BIT_RTC_STATUS_REG_1M_EVENT_M            0x08
  72 #define BIT_RTC_STATUS_REG_1H_EVENT_M            0x10
  73 #define BIT_RTC_STATUS_REG_1D_EVENT_M            0x20
  74 #define BIT_RTC_STATUS_REG_ALARM_M               0x40
  75 #define BIT_RTC_STATUS_REG_POWER_UP_M            0x80
  76
  77 /* RTC_INTERRUPTS_REG bitfields */
  78 #define BIT_RTC_INTERRUPTS_REG_EVERY_M           0x03
  79 #define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M        0x04
  80 #define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M        0x08
  81
  82
  83 /* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
  84 #define ALL_TIME_REGS           6
  85
  86 /*----------------------------------------------------------------------*/
  87
  88 /*
  89  * Supports 1 byte read from TWL4030 RTC register.
  90  */
  91 static int twl4030_rtc_read_u8(u8 *data, u8 reg)
  92 {
  93         int ret;
  94
  95         ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg);
  96         if (ret < 0)
  97                 pr_err("twl4030_rtc: Could not read TWL4030"
  98                        "register %X - error %d\n", reg, ret);
  99         return ret;
 100 }
 101
 102 /*
 103  * Supports 1 byte write to TWL4030 RTC registers.
 104  */
 105 static int twl4030_rtc_write_u8(u8 data, u8 reg)
 106 {
 107         int ret;
 108
 109         ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg);
 110         if (ret < 0)
 111                 pr_err("twl4030_rtc: Could not write TWL4030"
 112                        "register %X - error %d\n", reg, ret);
 113         return ret;
 114 }
 115
 116 /*
 117  * Cache the value for timer/alarm interrupts register; this is
 118  * only changed by callers holding rtc ops lock (or resume).
 119  */
 120 static unsigned char rtc_irq_bits;
 121
 122 /*
 123  * Enable 1/second update and/or alarm interrupts.
 124  */
 125 static int set_rtc_irq_bit(unsigned char bit)
 126 {
 127         unsigned char val;
 128         int ret;
 129
 130         val = rtc_irq_bits | bit;
 131         val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
 132         ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
 133         if (ret == 0)
 134                 rtc_irq_bits = val;
 135
 136         return ret;
 137 }
 138
 139 /*
 140  * Disable update and/or alarm interrupts.
 141  */
 142 static int mask_rtc_irq_bit(unsigned char bit)
 143 {
 144         unsigned char val;
 145         int ret;
 146
 147         val = rtc_irq_bits & ~bit;
 148         ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
 149         if (ret == 0)
 150                 rtc_irq_bits = val;
 151
 152         return ret;
 153 }
 154
 155 static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
 156 {
 157         int ret;
 158
 159         if (enabled)
 160                 ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
 161         else
 162                 ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
 163
 164         return ret;
 165 }
 166
 167 static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
 168 {
 169         int ret;
 170
 171         if (enabled)
 172                 ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 173         else
 174                 ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 175
 176         return ret;
 177 }
 178
 179 /*
 180  * Gets current TWL4030 RTC time and date parameters.
 181  *
 182  * The RTC's time/alarm representation is not what gmtime(3) requires
 183  * Linux to use:
 184  *
 185  *  - Months are 1..12 vs Linux 0-11
 186  *  - Years are 0..99 vs Linux 1900..N (we assume 21st century)
 187  */
 188 static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm)
 189 {
 190         unsigned char rtc_data[ALL_TIME_REGS + 1];
 191         int ret;
 192         u8 save_control;
 193
 194         ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
 195         if (ret < 0)
 196                 return ret;
 197
 198         save_control |= BIT_RTC_CTRL_REG_GET_TIME_M;
 199
 200         ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
 201         if (ret < 0)
 202                 return ret;
 203
 204         ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
 205                                REG_SECONDS_REG, ALL_TIME_REGS);
 206
 207         if (ret < 0) {
 208                 dev_err(dev, "rtc_read_time error %d\n", ret);
 209                 return ret;
 210         }
 211
 212         tm->tm_sec = bcd2bin(rtc_data[0]);
 213         tm->tm_min = bcd2bin(rtc_data[1]);
 214         tm->tm_hour = bcd2bin(rtc_data[2]);
 215         tm->tm_mday = bcd2bin(rtc_data[3]);
 216         tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
 217         tm->tm_year = bcd2bin(rtc_data[5]) + 100;
 218
 219         return ret;
 220 }
 221
 222 static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm)
 223 {
 224         unsigned char save_control;
 225         unsigned char rtc_data[ALL_TIME_REGS + 1];
 226         int ret;
 227
 228         rtc_data[1] = bin2bcd(tm->tm_sec);
 229         rtc_data[2] = bin2bcd(tm->tm_min);
 230         rtc_data[3] = bin2bcd(tm->tm_hour);
 231         rtc_data[4] = bin2bcd(tm->tm_mday);
 232         rtc_data[5] = bin2bcd(tm->tm_mon + 1);
 233         rtc_data[6] = bin2bcd(tm->tm_year - 100);
 234
 235         /* Stop RTC while updating the TC registers */
 236         ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
 237         if (ret < 0)
 238                 goto out;
 239
 240         save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
 241         twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
 242         if (ret < 0)
 243                 goto out;
 244
 245         /* update all the time registers in one shot */
 246         ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data,
 247                         REG_SECONDS_REG, ALL_TIME_REGS);
 248         if (ret < 0) {
 249                 dev_err(dev, "rtc_set_time error %d\n", ret);
 250                 goto out;
 251         }
 252
 253         /* Start back RTC */
 254         save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
 255         ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
 256
 257 out:
 258         return ret;
 259 }
 260
 261 /*
 262  * Gets current TWL4030 RTC alarm time.
 263  */
 264 static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 265 {
 266         unsigned char rtc_data[ALL_TIME_REGS + 1];
 267         int ret;
 268
 269         ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
 270                                REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
 271         if (ret < 0) {
 272                 dev_err(dev, "rtc_read_alarm error %d\n", ret);
 273                 return ret;
 274         }
 275
 276         /* some of these fields may be wildcard/"match all" */
 277         alm->time.tm_sec = bcd2bin(rtc_data[0]);
 278         alm->time.tm_min = bcd2bin(rtc_data[1]);
 279         alm->time.tm_hour = bcd2bin(rtc_data[2]);
 280         alm->time.tm_mday = bcd2bin(rtc_data[3]);
 281         alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
 282         alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
 283
 284         /* report cached alarm enable state */
 285         if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
 286                 alm->enabled = 1;
 287
 288         return ret;
 289 }
 290
 291 static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 292 {
 293         unsigned char alarm_data[ALL_TIME_REGS + 1];
 294         int ret;
 295
 296         ret = twl4030_rtc_alarm_irq_enable(dev, 0);
 297         if (ret)
 298                 goto out;
 299
 300         alarm_data[1] = bin2bcd(alm->time.tm_sec);
 301         alarm_data[2] = bin2bcd(alm->time.tm_min);
 302         alarm_data[3] = bin2bcd(alm->time.tm_hour);
 303         alarm_data[4] = bin2bcd(alm->time.tm_mday);
 304         alarm_data[5] = bin2bcd(alm->time.tm_mon + 1);
 305         alarm_data[6] = bin2bcd(alm->time.tm_year - 100);
 306
 307         /* update all the alarm registers in one shot */
 308         ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data,
 309                         REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
 310         if (ret) {
 311                 dev_err(dev, "rtc_set_alarm error %d\n", ret);
 312                 goto out;
 313         }
 314
 315         if (alm->enabled)
 316                 ret = twl4030_rtc_alarm_irq_enable(dev, 1);
 317 out:
 318         return ret;
 319 }
 320
 321 static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
 322 {
 323         unsigned long events = 0;
 324         int ret = IRQ_NONE;
 325         int res;
 326         u8 rd_reg;
 327
 328 #ifdef CONFIG_LOCKDEP
 329         /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
 330          * we don't want and can't tolerate.  Although it might be
 331          * friendlier not to borrow this thread context...
 332          */
 333         local_irq_enable();
 334 #endif
 335
 336         res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
 337         if (res)
 338                 goto out;
 339         /*
 340          * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
 341          * only one (ALARM or RTC) interrupt source may be enabled
 342          * at time, we also could check our results
 343          * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
 344          */
 345         if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
 346                 events |= RTC_IRQF | RTC_AF;
 347         else
 348                 events |= RTC_IRQF | RTC_UF;
 349
 350         res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M,
 351                                    REG_RTC_STATUS_REG);
 352         if (res)
 353                 goto out;
 354
 355         /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
 356          * needs 2 reads to clear the interrupt. One read is done in
 357          * do_twl4030_pwrirq(). Doing the second read, to clear
 358          * the bit.
 359          *
 360          * FIXME the reason PWR_ISR1 needs an extra read is that
 361          * RTC_IF retriggered until we cleared REG_ALARM_M above.
 362          * But re-reading like this is a bad hack; by doing so we
 363          * risk wrongly clearing status for some other IRQ (losing
 364          * the interrupt).  Be smarter about handling RTC_UF ...
 365          */
 366         res = twl4030_i2c_read_u8(TWL4030_MODULE_INT,
 367                         &rd_reg, TWL4030_INT_PWR_ISR1);
 368         if (res)
 369                 goto out;
 370
 371         /* Notify RTC core on event */
 372         rtc_update_irq(rtc, 1, events);
 373
 374         ret = IRQ_HANDLED;
 375 out:
 376         return ret;
 377 }
 378
 379 static struct rtc_class_ops twl4030_rtc_ops = {
 380         .read_time      = twl4030_rtc_read_time,
 381         .set_time       = twl4030_rtc_set_time,
 382         .read_alarm     = twl4030_rtc_read_alarm,
 383         .set_alarm      = twl4030_rtc_set_alarm,
 384         .alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
 385         .update_irq_enable = twl4030_rtc_update_irq_enable,
 386 };
 387
 388 /*----------------------------------------------------------------------*/
 389
 390 static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
 391 {
 392         struct rtc_device *rtc;
 393         int ret = 0;
 394         int irq = platform_get_irq(pdev, 0);
 395         u8 rd_reg;
 396
 397         if (irq <= 0)
 398                 return -EINVAL;
 399
 400         rtc = rtc_device_register(pdev->name,
 401                                   &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
 402         if (IS_ERR(rtc)) {
 403                 ret = PTR_ERR(rtc);
 404                 dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
 405                         PTR_ERR(rtc));
 406                 goto out0;
 407
 408         }
 409
 410         platform_set_drvdata(pdev, rtc);
 411
 412         ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
 413         if (ret < 0)
 414                 goto out1;
 415
 416         if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
 417                 dev_warn(&pdev->dev, "Power up reset detected.\n");
 418
 419         if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
 420                 dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
 421
 422         /* Clear RTC Power up reset and pending alarm interrupts */
 423         ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
 424         if (ret < 0)
 425                 goto out1;
 426
 427         ret = request_irq(irq, twl4030_rtc_interrupt,
 428                                 IRQF_TRIGGER_RISING,
 429                                 dev_name(&rtc->dev), rtc);
 430         if (ret < 0) {
 431                 dev_err(&pdev->dev, "IRQ is not free.\n");
 432                 goto out1;
 433         }
 434
 435         /* Check RTC module status, Enable if it is off */
 436         ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
 437         if (ret < 0)
 438                 goto out2;
 439
 440         if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
 441                 dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n");
 442                 rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
 443                 ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
 444                 if (ret < 0)
 445                         goto out2;
 446         }
 447
 448         /* init cached IRQ enable bits */
 449         ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
 450         if (ret < 0)
 451                 goto out2;
 452
 453         return ret;
 454
 455 out2:
 456         free_irq(irq, rtc);
 457 out1:
 458         rtc_device_unregister(rtc);
 459 out0:
 460         return ret;
 461 }
 462
 463 /*
 464  * Disable all TWL4030 RTC module interrupts.
 465  * Sets status flag to free.
 466  */
 467 static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
 468 {
 469         /* leave rtc running, but disable irqs */
 470         struct rtc_device *rtc = platform_get_drvdata(pdev);
 471         int irq = platform_get_irq(pdev, 0);
 472
 473         mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
 474         mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 475
 476         free_irq(irq, rtc);
 477
 478         rtc_device_unregister(rtc);
 479         platform_set_drvdata(pdev, NULL);
 480         return 0;
 481 }
 482
 483 static void twl4030_rtc_shutdown(struct platform_device *pdev)
 484 {
 485         /* mask timer interrupts, but leave alarm interrupts on to enable
 486            power-on when alarm is triggered */
 487         mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 488 }
 489
 490 #ifdef CONFIG_PM
 491
 492 static unsigned char irqstat;
 493
 494 static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 495 {
 496         irqstat = rtc_irq_bits;
 497
 498         mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 499         return 0;
 500 }
 501
 502 static int twl4030_rtc_resume(struct platform_device *pdev)
 503 {
 504         set_rtc_irq_bit(irqstat);
 505         return 0;
 506 }
 507
 508 #else
 509 #define twl4030_rtc_suspend NULL
 510 #define twl4030_rtc_resume  NULL
 511 #endif
 512
 513 MODULE_ALIAS("platform:twl4030_rtc");
 514
 515 static struct platform_driver twl4030rtc_driver = {
 516         .probe          = twl4030_rtc_probe,
 517         .remove         = __devexit_p(twl4030_rtc_remove),
 518         .shutdown       = twl4030_rtc_shutdown,
 519         .suspend        = twl4030_rtc_suspend,
 520         .resume         = twl4030_rtc_resume,
 521         .driver         = {
 522                 .owner  = THIS_MODULE,
 523                 .name   = "twl4030_rtc",
 524         },
 525 };
 526
 527 static int __init twl4030_rtc_init(void)
 528 {
 529         return platform_driver_register(&twl4030rtc_driver);
 530 }
 531 module_init(twl4030_rtc_init);
 532
 533 static void __exit twl4030_rtc_exit(void)
 534 {
 535         platform_driver_unregister(&twl4030rtc_driver);
 536 }
 537 module_exit(twl4030_rtc_exit);
 538
 539 MODULE_AUTHOR("Texas Instruments, MontaVista Software");
 540 MODULE_LICENSE("GPL");