um: remove SIGHUP handler
[linux/fpc-iii.git] / drivers / block / umem.c
blob031ca720d926623e810368399359e6a4dcf1b02d
1 /*
2 * mm.c - Micro Memory(tm) PCI memory board block device driver - v2.3
4 * (C) 2001 San Mehat <nettwerk@valinux.com>
5 * (C) 2001 Johannes Erdfelt <jerdfelt@valinux.com>
6 * (C) 2001 NeilBrown <neilb@cse.unsw.edu.au>
8 * This driver for the Micro Memory PCI Memory Module with Battery Backup
9 * is Copyright Micro Memory Inc 2001-2002. All rights reserved.
11 * This driver is released to the public under the terms of the
12 * GNU GENERAL PUBLIC LICENSE version 2
13 * See the file COPYING for details.
15 * This driver provides a standard block device interface for Micro Memory(tm)
16 * PCI based RAM boards.
17 * 10/05/01: Phap Nguyen - Rebuilt the driver
18 * 10/22/01: Phap Nguyen - v2.1 Added disk partitioning
19 * 29oct2001:NeilBrown - Use make_request_fn instead of request_fn
20 * - use stand disk partitioning (so fdisk works).
21 * 08nov2001:NeilBrown - change driver name from "mm" to "umem"
22 * - incorporate into main kernel
23 * 08apr2002:NeilBrown - Move some of interrupt handle to tasklet
24 * - use spin_lock_bh instead of _irq
25 * - Never block on make_request. queue
26 * bh's instead.
27 * - unregister umem from devfs at mod unload
28 * - Change version to 2.3
29 * 07Nov2001:Phap Nguyen - Select pci read command: 06, 12, 15 (Decimal)
30 * 07Jan2002: P. Nguyen - Used PCI Memory Write & Invalidate for DMA
31 * 15May2002:NeilBrown - convert to bio for 2.5
32 * 17May2002:NeilBrown - remove init_mem initialisation. Instead detect
33 * - a sequence of writes that cover the card, and
34 * - set initialised bit then.
37 #undef DEBUG /* #define DEBUG if you want debugging info (pr_debug) */
38 #include <linux/fs.h>
39 #include <linux/bio.h>
40 #include <linux/kernel.h>
41 #include <linux/mm.h>
42 #include <linux/mman.h>
43 #include <linux/gfp.h>
44 #include <linux/ioctl.h>
45 #include <linux/module.h>
46 #include <linux/init.h>
47 #include <linux/interrupt.h>
48 #include <linux/timer.h>
49 #include <linux/pci.h>
50 #include <linux/dma-mapping.h>
52 #include <linux/fcntl.h> /* O_ACCMODE */
53 #include <linux/hdreg.h> /* HDIO_GETGEO */
55 #include "umem.h"
57 #include <asm/uaccess.h>
58 #include <asm/io.h>
60 #define MM_MAXCARDS 4
61 #define MM_RAHEAD 2 /* two sectors */
62 #define MM_BLKSIZE 1024 /* 1k blocks */
63 #define MM_HARDSECT 512 /* 512-byte hardware sectors */
64 #define MM_SHIFT 6 /* max 64 partitions on 4 cards */
67 * Version Information
70 #define DRIVER_NAME "umem"
71 #define DRIVER_VERSION "v2.3"
72 #define DRIVER_AUTHOR "San Mehat, Johannes Erdfelt, NeilBrown"
73 #define DRIVER_DESC "Micro Memory(tm) PCI memory board block driver"
75 static int debug;
76 /* #define HW_TRACE(x) writeb(x,cards[0].csr_remap + MEMCTRLSTATUS_MAGIC) */
77 #define HW_TRACE(x)
79 #define DEBUG_LED_ON_TRANSFER 0x01
80 #define DEBUG_BATTERY_POLLING 0x02
82 module_param(debug, int, 0644);
83 MODULE_PARM_DESC(debug, "Debug bitmask");
85 static int pci_read_cmd = 0x0C; /* Read Multiple */
86 module_param(pci_read_cmd, int, 0);
87 MODULE_PARM_DESC(pci_read_cmd, "PCI read command");
89 static int pci_write_cmd = 0x0F; /* Write and Invalidate */
90 module_param(pci_write_cmd, int, 0);
91 MODULE_PARM_DESC(pci_write_cmd, "PCI write command");
93 static int pci_cmds;
95 static int major_nr;
97 #include <linux/blkdev.h>
98 #include <linux/blkpg.h>
100 struct cardinfo {
101 struct pci_dev *dev;
103 unsigned char __iomem *csr_remap;
104 unsigned int mm_size; /* size in kbytes */
106 unsigned int init_size; /* initial segment, in sectors,
107 * that we know to
108 * have been written
110 struct bio *bio, *currentbio, **biotail;
111 int current_idx;
112 sector_t current_sector;
114 struct request_queue *queue;
116 struct mm_page {
117 dma_addr_t page_dma;
118 struct mm_dma_desc *desc;
119 int cnt, headcnt;
120 struct bio *bio, **biotail;
121 int idx;
122 } mm_pages[2];
123 #define DESC_PER_PAGE ((PAGE_SIZE*2)/sizeof(struct mm_dma_desc))
125 int Active, Ready;
127 struct tasklet_struct tasklet;
128 unsigned int dma_status;
130 struct {
131 int good;
132 int warned;
133 unsigned long last_change;
134 } battery[2];
136 spinlock_t lock;
137 int check_batteries;
139 int flags;
142 static struct cardinfo cards[MM_MAXCARDS];
143 static struct timer_list battery_timer;
145 static int num_cards;
147 static struct gendisk *mm_gendisk[MM_MAXCARDS];
149 static void check_batteries(struct cardinfo *card);
151 static int get_userbit(struct cardinfo *card, int bit)
153 unsigned char led;
155 led = readb(card->csr_remap + MEMCTRLCMD_LEDCTRL);
156 return led & bit;
159 static int set_userbit(struct cardinfo *card, int bit, unsigned char state)
161 unsigned char led;
163 led = readb(card->csr_remap + MEMCTRLCMD_LEDCTRL);
164 if (state)
165 led |= bit;
166 else
167 led &= ~bit;
168 writeb(led, card->csr_remap + MEMCTRLCMD_LEDCTRL);
170 return 0;
174 * NOTE: For the power LED, use the LED_POWER_* macros since they differ
176 static void set_led(struct cardinfo *card, int shift, unsigned char state)
178 unsigned char led;
180 led = readb(card->csr_remap + MEMCTRLCMD_LEDCTRL);
181 if (state == LED_FLIP)
182 led ^= (1<<shift);
183 else {
184 led &= ~(0x03 << shift);
185 led |= (state << shift);
187 writeb(led, card->csr_remap + MEMCTRLCMD_LEDCTRL);
191 #ifdef MM_DIAG
192 static void dump_regs(struct cardinfo *card)
194 unsigned char *p;
195 int i, i1;
197 p = card->csr_remap;
198 for (i = 0; i < 8; i++) {
199 printk(KERN_DEBUG "%p ", p);
201 for (i1 = 0; i1 < 16; i1++)
202 printk("%02x ", *p++);
204 printk("\n");
207 #endif
209 static void dump_dmastat(struct cardinfo *card, unsigned int dmastat)
211 dev_printk(KERN_DEBUG, &card->dev->dev, "DMAstat - ");
212 if (dmastat & DMASCR_ANY_ERR)
213 printk(KERN_CONT "ANY_ERR ");
214 if (dmastat & DMASCR_MBE_ERR)
215 printk(KERN_CONT "MBE_ERR ");
216 if (dmastat & DMASCR_PARITY_ERR_REP)
217 printk(KERN_CONT "PARITY_ERR_REP ");
218 if (dmastat & DMASCR_PARITY_ERR_DET)
219 printk(KERN_CONT "PARITY_ERR_DET ");
220 if (dmastat & DMASCR_SYSTEM_ERR_SIG)
221 printk(KERN_CONT "SYSTEM_ERR_SIG ");
222 if (dmastat & DMASCR_TARGET_ABT)
223 printk(KERN_CONT "TARGET_ABT ");
224 if (dmastat & DMASCR_MASTER_ABT)
225 printk(KERN_CONT "MASTER_ABT ");
226 if (dmastat & DMASCR_CHAIN_COMPLETE)
227 printk(KERN_CONT "CHAIN_COMPLETE ");
228 if (dmastat & DMASCR_DMA_COMPLETE)
229 printk(KERN_CONT "DMA_COMPLETE ");
230 printk("\n");
234 * Theory of request handling
236 * Each bio is assigned to one mm_dma_desc - which may not be enough FIXME
237 * We have two pages of mm_dma_desc, holding about 64 descriptors
238 * each. These are allocated at init time.
239 * One page is "Ready" and is either full, or can have request added.
240 * The other page might be "Active", which DMA is happening on it.
242 * Whenever IO on the active page completes, the Ready page is activated
243 * and the ex-Active page is clean out and made Ready.
244 * Otherwise the Ready page is only activated when it becomes full.
246 * If a request arrives while both pages a full, it is queued, and b_rdev is
247 * overloaded to record whether it was a read or a write.
249 * The interrupt handler only polls the device to clear the interrupt.
250 * The processing of the result is done in a tasklet.
253 static void mm_start_io(struct cardinfo *card)
255 /* we have the lock, we know there is
256 * no IO active, and we know that card->Active
257 * is set
259 struct mm_dma_desc *desc;
260 struct mm_page *page;
261 int offset;
263 /* make the last descriptor end the chain */
264 page = &card->mm_pages[card->Active];
265 pr_debug("start_io: %d %d->%d\n",
266 card->Active, page->headcnt, page->cnt - 1);
267 desc = &page->desc[page->cnt-1];
269 desc->control_bits |= cpu_to_le32(DMASCR_CHAIN_COMP_EN);
270 desc->control_bits &= ~cpu_to_le32(DMASCR_CHAIN_EN);
271 desc->sem_control_bits = desc->control_bits;
274 if (debug & DEBUG_LED_ON_TRANSFER)
275 set_led(card, LED_REMOVE, LED_ON);
277 desc = &page->desc[page->headcnt];
278 writel(0, card->csr_remap + DMA_PCI_ADDR);
279 writel(0, card->csr_remap + DMA_PCI_ADDR + 4);
281 writel(0, card->csr_remap + DMA_LOCAL_ADDR);
282 writel(0, card->csr_remap + DMA_LOCAL_ADDR + 4);
284 writel(0, card->csr_remap + DMA_TRANSFER_SIZE);
285 writel(0, card->csr_remap + DMA_TRANSFER_SIZE + 4);
287 writel(0, card->csr_remap + DMA_SEMAPHORE_ADDR);
288 writel(0, card->csr_remap + DMA_SEMAPHORE_ADDR + 4);
290 offset = ((char *)desc) - ((char *)page->desc);
291 writel(cpu_to_le32((page->page_dma+offset) & 0xffffffff),
292 card->csr_remap + DMA_DESCRIPTOR_ADDR);
293 /* Force the value to u64 before shifting otherwise >> 32 is undefined C
294 * and on some ports will do nothing ! */
295 writel(cpu_to_le32(((u64)page->page_dma)>>32),
296 card->csr_remap + DMA_DESCRIPTOR_ADDR + 4);
298 /* Go, go, go */
299 writel(cpu_to_le32(DMASCR_GO | DMASCR_CHAIN_EN | pci_cmds),
300 card->csr_remap + DMA_STATUS_CTRL);
303 static int add_bio(struct cardinfo *card);
305 static void activate(struct cardinfo *card)
307 /* if No page is Active, and Ready is
308 * not empty, then switch Ready page
309 * to active and start IO.
310 * Then add any bh's that are available to Ready
313 do {
314 while (add_bio(card))
317 if (card->Active == -1 &&
318 card->mm_pages[card->Ready].cnt > 0) {
319 card->Active = card->Ready;
320 card->Ready = 1-card->Ready;
321 mm_start_io(card);
324 } while (card->Active == -1 && add_bio(card));
327 static inline void reset_page(struct mm_page *page)
329 page->cnt = 0;
330 page->headcnt = 0;
331 page->bio = NULL;
332 page->biotail = &page->bio;
336 * If there is room on Ready page, take
337 * one bh off list and add it.
338 * return 1 if there was room, else 0.
340 static int add_bio(struct cardinfo *card)
342 struct mm_page *p;
343 struct mm_dma_desc *desc;
344 dma_addr_t dma_handle;
345 int offset;
346 struct bio *bio;
347 struct bio_vec *vec;
348 int idx;
349 int rw;
350 int len;
352 bio = card->currentbio;
353 if (!bio && card->bio) {
354 card->currentbio = card->bio;
355 card->current_idx = card->bio->bi_idx;
356 card->current_sector = card->bio->bi_sector;
357 card->bio = card->bio->bi_next;
358 if (card->bio == NULL)
359 card->biotail = &card->bio;
360 card->currentbio->bi_next = NULL;
361 return 1;
363 if (!bio)
364 return 0;
365 idx = card->current_idx;
367 rw = bio_rw(bio);
368 if (card->mm_pages[card->Ready].cnt >= DESC_PER_PAGE)
369 return 0;
371 vec = bio_iovec_idx(bio, idx);
372 len = vec->bv_len;
373 dma_handle = pci_map_page(card->dev,
374 vec->bv_page,
375 vec->bv_offset,
376 len,
377 (rw == READ) ?
378 PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
380 p = &card->mm_pages[card->Ready];
381 desc = &p->desc[p->cnt];
382 p->cnt++;
383 if (p->bio == NULL)
384 p->idx = idx;
385 if ((p->biotail) != &bio->bi_next) {
386 *(p->biotail) = bio;
387 p->biotail = &(bio->bi_next);
388 bio->bi_next = NULL;
391 desc->data_dma_handle = dma_handle;
393 desc->pci_addr = cpu_to_le64((u64)desc->data_dma_handle);
394 desc->local_addr = cpu_to_le64(card->current_sector << 9);
395 desc->transfer_size = cpu_to_le32(len);
396 offset = (((char *)&desc->sem_control_bits) - ((char *)p->desc));
397 desc->sem_addr = cpu_to_le64((u64)(p->page_dma+offset));
398 desc->zero1 = desc->zero2 = 0;
399 offset = (((char *)(desc+1)) - ((char *)p->desc));
400 desc->next_desc_addr = cpu_to_le64(p->page_dma+offset);
401 desc->control_bits = cpu_to_le32(DMASCR_GO|DMASCR_ERR_INT_EN|
402 DMASCR_PARITY_INT_EN|
403 DMASCR_CHAIN_EN |
404 DMASCR_SEM_EN |
405 pci_cmds);
406 if (rw == WRITE)
407 desc->control_bits |= cpu_to_le32(DMASCR_TRANSFER_READ);
408 desc->sem_control_bits = desc->control_bits;
410 card->current_sector += (len >> 9);
411 idx++;
412 card->current_idx = idx;
413 if (idx >= bio->bi_vcnt)
414 card->currentbio = NULL;
416 return 1;
419 static void process_page(unsigned long data)
421 /* check if any of the requests in the page are DMA_COMPLETE,
422 * and deal with them appropriately.
423 * If we find a descriptor without DMA_COMPLETE in the semaphore, then
424 * dma must have hit an error on that descriptor, so use dma_status
425 * instead and assume that all following descriptors must be re-tried.
427 struct mm_page *page;
428 struct bio *return_bio = NULL;
429 struct cardinfo *card = (struct cardinfo *)data;
430 unsigned int dma_status = card->dma_status;
432 spin_lock_bh(&card->lock);
433 if (card->Active < 0)
434 goto out_unlock;
435 page = &card->mm_pages[card->Active];
437 while (page->headcnt < page->cnt) {
438 struct bio *bio = page->bio;
439 struct mm_dma_desc *desc = &page->desc[page->headcnt];
440 int control = le32_to_cpu(desc->sem_control_bits);
441 int last = 0;
442 int idx;
444 if (!(control & DMASCR_DMA_COMPLETE)) {
445 control = dma_status;
446 last = 1;
448 page->headcnt++;
449 idx = page->idx;
450 page->idx++;
451 if (page->idx >= bio->bi_vcnt) {
452 page->bio = bio->bi_next;
453 if (page->bio)
454 page->idx = page->bio->bi_idx;
457 pci_unmap_page(card->dev, desc->data_dma_handle,
458 bio_iovec_idx(bio, idx)->bv_len,
459 (control & DMASCR_TRANSFER_READ) ?
460 PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
461 if (control & DMASCR_HARD_ERROR) {
462 /* error */
463 clear_bit(BIO_UPTODATE, &bio->bi_flags);
464 dev_printk(KERN_WARNING, &card->dev->dev,
465 "I/O error on sector %d/%d\n",
466 le32_to_cpu(desc->local_addr)>>9,
467 le32_to_cpu(desc->transfer_size));
468 dump_dmastat(card, control);
469 } else if ((bio->bi_rw & REQ_WRITE) &&
470 le32_to_cpu(desc->local_addr) >> 9 ==
471 card->init_size) {
472 card->init_size += le32_to_cpu(desc->transfer_size) >> 9;
473 if (card->init_size >> 1 >= card->mm_size) {
474 dev_printk(KERN_INFO, &card->dev->dev,
475 "memory now initialised\n");
476 set_userbit(card, MEMORY_INITIALIZED, 1);
479 if (bio != page->bio) {
480 bio->bi_next = return_bio;
481 return_bio = bio;
484 if (last)
485 break;
488 if (debug & DEBUG_LED_ON_TRANSFER)
489 set_led(card, LED_REMOVE, LED_OFF);
491 if (card->check_batteries) {
492 card->check_batteries = 0;
493 check_batteries(card);
495 if (page->headcnt >= page->cnt) {
496 reset_page(page);
497 card->Active = -1;
498 activate(card);
499 } else {
500 /* haven't finished with this one yet */
501 pr_debug("do some more\n");
502 mm_start_io(card);
504 out_unlock:
505 spin_unlock_bh(&card->lock);
507 while (return_bio) {
508 struct bio *bio = return_bio;
510 return_bio = bio->bi_next;
511 bio->bi_next = NULL;
512 bio_endio(bio, 0);
516 static int mm_make_request(struct request_queue *q, struct bio *bio)
518 struct cardinfo *card = q->queuedata;
519 pr_debug("mm_make_request %llu %u\n",
520 (unsigned long long)bio->bi_sector, bio->bi_size);
522 spin_lock_irq(&card->lock);
523 *card->biotail = bio;
524 bio->bi_next = NULL;
525 card->biotail = &bio->bi_next;
526 spin_unlock_irq(&card->lock);
528 return 0;
531 static irqreturn_t mm_interrupt(int irq, void *__card)
533 struct cardinfo *card = (struct cardinfo *) __card;
534 unsigned int dma_status;
535 unsigned short cfg_status;
537 HW_TRACE(0x30);
539 dma_status = le32_to_cpu(readl(card->csr_remap + DMA_STATUS_CTRL));
541 if (!(dma_status & (DMASCR_ERROR_MASK | DMASCR_CHAIN_COMPLETE))) {
542 /* interrupt wasn't for me ... */
543 return IRQ_NONE;
546 /* clear COMPLETION interrupts */
547 if (card->flags & UM_FLAG_NO_BYTE_STATUS)
548 writel(cpu_to_le32(DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE),
549 card->csr_remap + DMA_STATUS_CTRL);
550 else
551 writeb((DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE) >> 16,
552 card->csr_remap + DMA_STATUS_CTRL + 2);
554 /* log errors and clear interrupt status */
555 if (dma_status & DMASCR_ANY_ERR) {
556 unsigned int data_log1, data_log2;
557 unsigned int addr_log1, addr_log2;
558 unsigned char stat, count, syndrome, check;
560 stat = readb(card->csr_remap + MEMCTRLCMD_ERRSTATUS);
562 data_log1 = le32_to_cpu(readl(card->csr_remap +
563 ERROR_DATA_LOG));
564 data_log2 = le32_to_cpu(readl(card->csr_remap +
565 ERROR_DATA_LOG + 4));
566 addr_log1 = le32_to_cpu(readl(card->csr_remap +
567 ERROR_ADDR_LOG));
568 addr_log2 = readb(card->csr_remap + ERROR_ADDR_LOG + 4);
570 count = readb(card->csr_remap + ERROR_COUNT);
571 syndrome = readb(card->csr_remap + ERROR_SYNDROME);
572 check = readb(card->csr_remap + ERROR_CHECK);
574 dump_dmastat(card, dma_status);
576 if (stat & 0x01)
577 dev_printk(KERN_ERR, &card->dev->dev,
578 "Memory access error detected (err count %d)\n",
579 count);
580 if (stat & 0x02)
581 dev_printk(KERN_ERR, &card->dev->dev,
582 "Multi-bit EDC error\n");
584 dev_printk(KERN_ERR, &card->dev->dev,
585 "Fault Address 0x%02x%08x, Fault Data 0x%08x%08x\n",
586 addr_log2, addr_log1, data_log2, data_log1);
587 dev_printk(KERN_ERR, &card->dev->dev,
588 "Fault Check 0x%02x, Fault Syndrome 0x%02x\n",
589 check, syndrome);
591 writeb(0, card->csr_remap + ERROR_COUNT);
594 if (dma_status & DMASCR_PARITY_ERR_REP) {
595 dev_printk(KERN_ERR, &card->dev->dev,
596 "PARITY ERROR REPORTED\n");
597 pci_read_config_word(card->dev, PCI_STATUS, &cfg_status);
598 pci_write_config_word(card->dev, PCI_STATUS, cfg_status);
601 if (dma_status & DMASCR_PARITY_ERR_DET) {
602 dev_printk(KERN_ERR, &card->dev->dev,
603 "PARITY ERROR DETECTED\n");
604 pci_read_config_word(card->dev, PCI_STATUS, &cfg_status);
605 pci_write_config_word(card->dev, PCI_STATUS, cfg_status);
608 if (dma_status & DMASCR_SYSTEM_ERR_SIG) {
609 dev_printk(KERN_ERR, &card->dev->dev, "SYSTEM ERROR\n");
610 pci_read_config_word(card->dev, PCI_STATUS, &cfg_status);
611 pci_write_config_word(card->dev, PCI_STATUS, cfg_status);
614 if (dma_status & DMASCR_TARGET_ABT) {
615 dev_printk(KERN_ERR, &card->dev->dev, "TARGET ABORT\n");
616 pci_read_config_word(card->dev, PCI_STATUS, &cfg_status);
617 pci_write_config_word(card->dev, PCI_STATUS, cfg_status);
620 if (dma_status & DMASCR_MASTER_ABT) {
621 dev_printk(KERN_ERR, &card->dev->dev, "MASTER ABORT\n");
622 pci_read_config_word(card->dev, PCI_STATUS, &cfg_status);
623 pci_write_config_word(card->dev, PCI_STATUS, cfg_status);
626 /* and process the DMA descriptors */
627 card->dma_status = dma_status;
628 tasklet_schedule(&card->tasklet);
630 HW_TRACE(0x36);
632 return IRQ_HANDLED;
636 * If both batteries are good, no LED
637 * If either battery has been warned, solid LED
638 * If both batteries are bad, flash the LED quickly
639 * If either battery is bad, flash the LED semi quickly
641 static void set_fault_to_battery_status(struct cardinfo *card)
643 if (card->battery[0].good && card->battery[1].good)
644 set_led(card, LED_FAULT, LED_OFF);
645 else if (card->battery[0].warned || card->battery[1].warned)
646 set_led(card, LED_FAULT, LED_ON);
647 else if (!card->battery[0].good && !card->battery[1].good)
648 set_led(card, LED_FAULT, LED_FLASH_7_0);
649 else
650 set_led(card, LED_FAULT, LED_FLASH_3_5);
653 static void init_battery_timer(void);
655 static int check_battery(struct cardinfo *card, int battery, int status)
657 if (status != card->battery[battery].good) {
658 card->battery[battery].good = !card->battery[battery].good;
659 card->battery[battery].last_change = jiffies;
661 if (card->battery[battery].good) {
662 dev_printk(KERN_ERR, &card->dev->dev,
663 "Battery %d now good\n", battery + 1);
664 card->battery[battery].warned = 0;
665 } else
666 dev_printk(KERN_ERR, &card->dev->dev,
667 "Battery %d now FAILED\n", battery + 1);
669 return 1;
670 } else if (!card->battery[battery].good &&
671 !card->battery[battery].warned &&
672 time_after_eq(jiffies, card->battery[battery].last_change +
673 (HZ * 60 * 60 * 5))) {
674 dev_printk(KERN_ERR, &card->dev->dev,
675 "Battery %d still FAILED after 5 hours\n", battery + 1);
676 card->battery[battery].warned = 1;
678 return 1;
681 return 0;
684 static void check_batteries(struct cardinfo *card)
686 /* NOTE: this must *never* be called while the card
687 * is doing (bus-to-card) DMA, or you will need the
688 * reset switch
690 unsigned char status;
691 int ret1, ret2;
693 status = readb(card->csr_remap + MEMCTRLSTATUS_BATTERY);
694 if (debug & DEBUG_BATTERY_POLLING)
695 dev_printk(KERN_DEBUG, &card->dev->dev,
696 "checking battery status, 1 = %s, 2 = %s\n",
697 (status & BATTERY_1_FAILURE) ? "FAILURE" : "OK",
698 (status & BATTERY_2_FAILURE) ? "FAILURE" : "OK");
700 ret1 = check_battery(card, 0, !(status & BATTERY_1_FAILURE));
701 ret2 = check_battery(card, 1, !(status & BATTERY_2_FAILURE));
703 if (ret1 || ret2)
704 set_fault_to_battery_status(card);
707 static void check_all_batteries(unsigned long ptr)
709 int i;
711 for (i = 0; i < num_cards; i++)
712 if (!(cards[i].flags & UM_FLAG_NO_BATT)) {
713 struct cardinfo *card = &cards[i];
714 spin_lock_bh(&card->lock);
715 if (card->Active >= 0)
716 card->check_batteries = 1;
717 else
718 check_batteries(card);
719 spin_unlock_bh(&card->lock);
722 init_battery_timer();
725 static void init_battery_timer(void)
727 init_timer(&battery_timer);
728 battery_timer.function = check_all_batteries;
729 battery_timer.expires = jiffies + (HZ * 60);
730 add_timer(&battery_timer);
733 static void del_battery_timer(void)
735 del_timer(&battery_timer);
739 * Note no locks taken out here. In a worst case scenario, we could drop
740 * a chunk of system memory. But that should never happen, since validation
741 * happens at open or mount time, when locks are held.
743 * That's crap, since doing that while some partitions are opened
744 * or mounted will give you really nasty results.
746 static int mm_revalidate(struct gendisk *disk)
748 struct cardinfo *card = disk->private_data;
749 set_capacity(disk, card->mm_size << 1);
750 return 0;
753 static int mm_getgeo(struct block_device *bdev, struct hd_geometry *geo)
755 struct cardinfo *card = bdev->bd_disk->private_data;
756 int size = card->mm_size * (1024 / MM_HARDSECT);
759 * get geometry: we have to fake one... trim the size to a
760 * multiple of 2048 (1M): tell we have 32 sectors, 64 heads,
761 * whatever cylinders.
763 geo->heads = 64;
764 geo->sectors = 32;
765 geo->cylinders = size / (geo->heads * geo->sectors);
766 return 0;
769 static const struct block_device_operations mm_fops = {
770 .owner = THIS_MODULE,
771 .getgeo = mm_getgeo,
772 .revalidate_disk = mm_revalidate,
775 static int __devinit mm_pci_probe(struct pci_dev *dev,
776 const struct pci_device_id *id)
778 int ret = -ENODEV;
779 struct cardinfo *card = &cards[num_cards];
780 unsigned char mem_present;
781 unsigned char batt_status;
782 unsigned int saved_bar, data;
783 unsigned long csr_base;
784 unsigned long csr_len;
785 int magic_number;
786 static int printed_version;
788 if (!printed_version++)
789 printk(KERN_INFO DRIVER_VERSION " : " DRIVER_DESC "\n");
791 ret = pci_enable_device(dev);
792 if (ret)
793 return ret;
795 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF8);
796 pci_set_master(dev);
798 card->dev = dev;
800 csr_base = pci_resource_start(dev, 0);
801 csr_len = pci_resource_len(dev, 0);
802 if (!csr_base || !csr_len)
803 return -ENODEV;
805 dev_printk(KERN_INFO, &dev->dev,
806 "Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))\n");
808 if (pci_set_dma_mask(dev, DMA_BIT_MASK(64)) &&
809 pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
810 dev_printk(KERN_WARNING, &dev->dev, "NO suitable DMA found\n");
811 return -ENOMEM;
814 ret = pci_request_regions(dev, DRIVER_NAME);
815 if (ret) {
816 dev_printk(KERN_ERR, &card->dev->dev,
817 "Unable to request memory region\n");
818 goto failed_req_csr;
821 card->csr_remap = ioremap_nocache(csr_base, csr_len);
822 if (!card->csr_remap) {
823 dev_printk(KERN_ERR, &card->dev->dev,
824 "Unable to remap memory region\n");
825 ret = -ENOMEM;
827 goto failed_remap_csr;
830 dev_printk(KERN_INFO, &card->dev->dev,
831 "CSR 0x%08lx -> 0x%p (0x%lx)\n",
832 csr_base, card->csr_remap, csr_len);
834 switch (card->dev->device) {
835 case 0x5415:
836 card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG;
837 magic_number = 0x59;
838 break;
840 case 0x5425:
841 card->flags |= UM_FLAG_NO_BYTE_STATUS;
842 magic_number = 0x5C;
843 break;
845 case 0x6155:
846 card->flags |= UM_FLAG_NO_BYTE_STATUS |
847 UM_FLAG_NO_BATTREG | UM_FLAG_NO_BATT;
848 magic_number = 0x99;
849 break;
851 default:
852 magic_number = 0x100;
853 break;
856 if (readb(card->csr_remap + MEMCTRLSTATUS_MAGIC) != magic_number) {
857 dev_printk(KERN_ERR, &card->dev->dev, "Magic number invalid\n");
858 ret = -ENOMEM;
859 goto failed_magic;
862 card->mm_pages[0].desc = pci_alloc_consistent(card->dev,
863 PAGE_SIZE * 2,
864 &card->mm_pages[0].page_dma);
865 card->mm_pages[1].desc = pci_alloc_consistent(card->dev,
866 PAGE_SIZE * 2,
867 &card->mm_pages[1].page_dma);
868 if (card->mm_pages[0].desc == NULL ||
869 card->mm_pages[1].desc == NULL) {
870 dev_printk(KERN_ERR, &card->dev->dev, "alloc failed\n");
871 goto failed_alloc;
873 reset_page(&card->mm_pages[0]);
874 reset_page(&card->mm_pages[1]);
875 card->Ready = 0; /* page 0 is ready */
876 card->Active = -1; /* no page is active */
877 card->bio = NULL;
878 card->biotail = &card->bio;
880 card->queue = blk_alloc_queue(GFP_KERNEL);
881 if (!card->queue)
882 goto failed_alloc;
884 blk_queue_make_request(card->queue, mm_make_request);
885 card->queue->queue_lock = &card->lock;
886 card->queue->queuedata = card;
888 tasklet_init(&card->tasklet, process_page, (unsigned long)card);
890 card->check_batteries = 0;
892 mem_present = readb(card->csr_remap + MEMCTRLSTATUS_MEMORY);
893 switch (mem_present) {
894 case MEM_128_MB:
895 card->mm_size = 1024 * 128;
896 break;
897 case MEM_256_MB:
898 card->mm_size = 1024 * 256;
899 break;
900 case MEM_512_MB:
901 card->mm_size = 1024 * 512;
902 break;
903 case MEM_1_GB:
904 card->mm_size = 1024 * 1024;
905 break;
906 case MEM_2_GB:
907 card->mm_size = 1024 * 2048;
908 break;
909 default:
910 card->mm_size = 0;
911 break;
914 /* Clear the LED's we control */
915 set_led(card, LED_REMOVE, LED_OFF);
916 set_led(card, LED_FAULT, LED_OFF);
918 batt_status = readb(card->csr_remap + MEMCTRLSTATUS_BATTERY);
920 card->battery[0].good = !(batt_status & BATTERY_1_FAILURE);
921 card->battery[1].good = !(batt_status & BATTERY_2_FAILURE);
922 card->battery[0].last_change = card->battery[1].last_change = jiffies;
924 if (card->flags & UM_FLAG_NO_BATT)
925 dev_printk(KERN_INFO, &card->dev->dev,
926 "Size %d KB\n", card->mm_size);
927 else {
928 dev_printk(KERN_INFO, &card->dev->dev,
929 "Size %d KB, Battery 1 %s (%s), Battery 2 %s (%s)\n",
930 card->mm_size,
931 batt_status & BATTERY_1_DISABLED ? "Disabled" : "Enabled",
932 card->battery[0].good ? "OK" : "FAILURE",
933 batt_status & BATTERY_2_DISABLED ? "Disabled" : "Enabled",
934 card->battery[1].good ? "OK" : "FAILURE");
936 set_fault_to_battery_status(card);
939 pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, &saved_bar);
940 data = 0xffffffff;
941 pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, data);
942 pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, &data);
943 pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, saved_bar);
944 data &= 0xfffffff0;
945 data = ~data;
946 data += 1;
948 if (request_irq(dev->irq, mm_interrupt, IRQF_SHARED, DRIVER_NAME,
949 card)) {
950 dev_printk(KERN_ERR, &card->dev->dev,
951 "Unable to allocate IRQ\n");
952 ret = -ENODEV;
953 goto failed_req_irq;
956 dev_printk(KERN_INFO, &card->dev->dev,
957 "Window size %d bytes, IRQ %d\n", data, dev->irq);
959 spin_lock_init(&card->lock);
961 pci_set_drvdata(dev, card);
963 if (pci_write_cmd != 0x0F) /* If not Memory Write & Invalidate */
964 pci_write_cmd = 0x07; /* then Memory Write command */
966 if (pci_write_cmd & 0x08) { /* use Memory Write and Invalidate */
967 unsigned short cfg_command;
968 pci_read_config_word(dev, PCI_COMMAND, &cfg_command);
969 cfg_command |= 0x10; /* Memory Write & Invalidate Enable */
970 pci_write_config_word(dev, PCI_COMMAND, cfg_command);
972 pci_cmds = (pci_read_cmd << 28) | (pci_write_cmd << 24);
974 num_cards++;
976 if (!get_userbit(card, MEMORY_INITIALIZED)) {
977 dev_printk(KERN_INFO, &card->dev->dev,
978 "memory NOT initialized. Consider over-writing whole device.\n");
979 card->init_size = 0;
980 } else {
981 dev_printk(KERN_INFO, &card->dev->dev,
982 "memory already initialized\n");
983 card->init_size = card->mm_size;
986 /* Enable ECC */
987 writeb(EDC_STORE_CORRECT, card->csr_remap + MEMCTRLCMD_ERRCTRL);
989 return 0;
991 failed_req_irq:
992 failed_alloc:
993 if (card->mm_pages[0].desc)
994 pci_free_consistent(card->dev, PAGE_SIZE*2,
995 card->mm_pages[0].desc,
996 card->mm_pages[0].page_dma);
997 if (card->mm_pages[1].desc)
998 pci_free_consistent(card->dev, PAGE_SIZE*2,
999 card->mm_pages[1].desc,
1000 card->mm_pages[1].page_dma);
1001 failed_magic:
1002 iounmap(card->csr_remap);
1003 failed_remap_csr:
1004 pci_release_regions(dev);
1005 failed_req_csr:
1007 return ret;
1010 static void mm_pci_remove(struct pci_dev *dev)
1012 struct cardinfo *card = pci_get_drvdata(dev);
1014 tasklet_kill(&card->tasklet);
1015 free_irq(dev->irq, card);
1016 iounmap(card->csr_remap);
1018 if (card->mm_pages[0].desc)
1019 pci_free_consistent(card->dev, PAGE_SIZE*2,
1020 card->mm_pages[0].desc,
1021 card->mm_pages[0].page_dma);
1022 if (card->mm_pages[1].desc)
1023 pci_free_consistent(card->dev, PAGE_SIZE*2,
1024 card->mm_pages[1].desc,
1025 card->mm_pages[1].page_dma);
1026 blk_cleanup_queue(card->queue);
1028 pci_release_regions(dev);
1029 pci_disable_device(dev);
1032 static const struct pci_device_id mm_pci_ids[] = {
1033 {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_5415CN)},
1034 {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_5425CN)},
1035 {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_6155)},
1037 .vendor = 0x8086,
1038 .device = 0xB555,
1039 .subvendor = 0x1332,
1040 .subdevice = 0x5460,
1041 .class = 0x050000,
1042 .class_mask = 0,
1043 }, { /* end: all zeroes */ }
1046 MODULE_DEVICE_TABLE(pci, mm_pci_ids);
1048 static struct pci_driver mm_pci_driver = {
1049 .name = DRIVER_NAME,
1050 .id_table = mm_pci_ids,
1051 .probe = mm_pci_probe,
1052 .remove = mm_pci_remove,
1055 static int __init mm_init(void)
1057 int retval, i;
1058 int err;
1060 retval = pci_register_driver(&mm_pci_driver);
1061 if (retval)
1062 return -ENOMEM;
1064 err = major_nr = register_blkdev(0, DRIVER_NAME);
1065 if (err < 0) {
1066 pci_unregister_driver(&mm_pci_driver);
1067 return -EIO;
1070 for (i = 0; i < num_cards; i++) {
1071 mm_gendisk[i] = alloc_disk(1 << MM_SHIFT);
1072 if (!mm_gendisk[i])
1073 goto out;
1076 for (i = 0; i < num_cards; i++) {
1077 struct gendisk *disk = mm_gendisk[i];
1078 sprintf(disk->disk_name, "umem%c", 'a'+i);
1079 spin_lock_init(&cards[i].lock);
1080 disk->major = major_nr;
1081 disk->first_minor = i << MM_SHIFT;
1082 disk->fops = &mm_fops;
1083 disk->private_data = &cards[i];
1084 disk->queue = cards[i].queue;
1085 set_capacity(disk, cards[i].mm_size << 1);
1086 add_disk(disk);
1089 init_battery_timer();
1090 printk(KERN_INFO "MM: desc_per_page = %ld\n", DESC_PER_PAGE);
1091 /* printk("mm_init: Done. 10-19-01 9:00\n"); */
1092 return 0;
1094 out:
1095 pci_unregister_driver(&mm_pci_driver);
1096 unregister_blkdev(major_nr, DRIVER_NAME);
1097 while (i--)
1098 put_disk(mm_gendisk[i]);
1099 return -ENOMEM;
1102 static void __exit mm_cleanup(void)
1104 int i;
1106 del_battery_timer();
1108 for (i = 0; i < num_cards ; i++) {
1109 del_gendisk(mm_gendisk[i]);
1110 put_disk(mm_gendisk[i]);
1113 pci_unregister_driver(&mm_pci_driver);
1115 unregister_blkdev(major_nr, DRIVER_NAME);
1118 module_init(mm_init);
1119 module_exit(mm_cleanup);
1121 MODULE_AUTHOR(DRIVER_AUTHOR);
1122 MODULE_DESCRIPTION(DRIVER_DESC);
1123 MODULE_LICENSE("GPL");