include/acpi/acconfig.h

   1 /******************************************************************************
   2  *
   3  * Name: acconfig.h - Global configuration constants
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2015, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #ifndef _ACCONFIG_H
  45 #define _ACCONFIG_H
  46
  47 /******************************************************************************
  48  *
  49  * Configuration options
  50  *
  51  *****************************************************************************/
  52
  53 /*
  54  * ACPI_DEBUG_OUTPUT    - This switch enables all the debug facilities of the
  55  *                        ACPI subsystem.  This includes the DEBUG_PRINT output
  56  *                        statements.  When disabled, all DEBUG_PRINT
  57  *                        statements are compiled out.
  58  *
  59  * ACPI_APPLICATION     - Use this switch if the subsystem is going to be run
  60  *                        at the application level.
  61  *
  62  */
  63
  64 /*
  65  * OS name, used for the _OS object.  The _OS object is essentially obsolete,
  66  * but there is a large base of ASL/AML code in existing machines that check
  67  * for the string below.  The use of this string usually guarantees that
  68  * the ASL will execute down the most tested code path.  Also, there is some
  69  * code that will not execute the _OSI method unless _OS matches the string
  70  * below.  Therefore, change this string at your own risk.
  71  */
  72 #define ACPI_OS_NAME                    "Microsoft Windows NT"
  73
  74 /* Maximum objects in the various object caches */
  75
  76 #define ACPI_MAX_STATE_CACHE_DEPTH      96      /* State objects */
  77 #define ACPI_MAX_PARSE_CACHE_DEPTH      96      /* Parse tree objects */
  78 #define ACPI_MAX_EXTPARSE_CACHE_DEPTH   96      /* Parse tree objects */
  79 #define ACPI_MAX_OBJECT_CACHE_DEPTH     96      /* Interpreter operand objects */
  80 #define ACPI_MAX_NAMESPACE_CACHE_DEPTH  96      /* Namespace objects */
  81
  82 /*
  83  * Should the subsystem abort the loading of an ACPI table if the
  84  * table checksum is incorrect?
  85  */
  86 #ifndef ACPI_CHECKSUM_ABORT
  87 #define ACPI_CHECKSUM_ABORT             FALSE
  88 #endif
  89
  90 /*
  91  * Generate a version of ACPICA that only supports "reduced hardware"
  92  * platforms (as defined in ACPI 5.0). Set to TRUE to generate a specialized
  93  * version of ACPICA that ONLY supports the ACPI 5.0 "reduced hardware"
  94  * model. In other words, no ACPI hardware is supported.
  95  *
  96  * If TRUE, this means no support for the following:
  97  *      PM Event and Control registers
  98  *      SCI interrupt (and handler)
  99  *      Fixed Events
 100  *      General Purpose Events (GPEs)
 101  *      Global Lock
 102  *      ACPI PM timer
 103  *      FACS table (Waking vectors and Global Lock)
 104  */
 105 #ifndef ACPI_REDUCED_HARDWARE
 106 #define ACPI_REDUCED_HARDWARE           FALSE
 107 #endif
 108
 109 /******************************************************************************
 110  *
 111  * Subsystem Constants
 112  *
 113  *****************************************************************************/
 114
 115 /* Version of ACPI supported */
 116
 117 #define ACPI_CA_SUPPORT_LEVEL           5
 118
 119 /* Maximum count for a semaphore object */
 120
 121 #define ACPI_MAX_SEMAPHORE_COUNT        256
 122
 123 /* Maximum object reference count (detects object deletion issues) */
 124
 125 #define ACPI_MAX_REFERENCE_COUNT        0x1000
 126
 127 /* Default page size for use in mapping memory for operation regions */
 128
 129 #define ACPI_DEFAULT_PAGE_SIZE          4096    /* Must be power of 2 */
 130
 131 /* owner_id tracking. 8 entries allows for 255 owner_ids */
 132
 133 #define ACPI_NUM_OWNERID_MASKS          8
 134
 135 /* Size of the root table array is increased by this increment */
 136
 137 #define ACPI_ROOT_TABLE_SIZE_INCREMENT  4
 138
 139 /* Maximum sleep allowed via Sleep() operator */
 140
 141 #define ACPI_MAX_SLEEP                  2000    /* 2000 millisec == two seconds */
 142
 143 /* Address Range lists are per-space_id (Memory and I/O only) */
 144
 145 #define ACPI_ADDRESS_RANGE_MAX          2
 146
 147 /******************************************************************************
 148  *
 149  * ACPI Specification constants (Do not change unless the specification changes)
 150  *
 151  *****************************************************************************/
 152
 153 /* Method info (in WALK_STATE), containing local variables and argumetns */
 154
 155 #define ACPI_METHOD_NUM_LOCALS          8
 156 #define ACPI_METHOD_MAX_LOCAL           7
 157
 158 #define ACPI_METHOD_NUM_ARGS            7
 159 #define ACPI_METHOD_MAX_ARG             6
 160
 161 /*
 162  * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
 163  */
 164 #define ACPI_OBJ_NUM_OPERANDS           8
 165 #define ACPI_OBJ_MAX_OPERAND            7
 166
 167 /* Number of elements in the Result Stack frame, can be an arbitrary value */
 168
 169 #define ACPI_RESULTS_FRAME_OBJ_NUM      8
 170
 171 /*
 172  * Maximal number of elements the Result Stack can contain,
 173  * it may be an arbitray value not exceeding the types of
 174  * result_size and result_count (now u8).
 175  */
 176 #define ACPI_RESULTS_OBJ_NUM_MAX        255
 177
 178 /* Constants used in searching for the RSDP in low memory */
 179
 180 #define ACPI_EBDA_PTR_LOCATION          0x0000040E      /* Physical Address */
 181 #define ACPI_EBDA_PTR_LENGTH            2
 182 #define ACPI_EBDA_WINDOW_SIZE           1024
 183 #define ACPI_HI_RSDP_WINDOW_BASE        0x000E0000      /* Physical Address */
 184 #define ACPI_HI_RSDP_WINDOW_SIZE        0x00020000
 185 #define ACPI_RSDP_SCAN_STEP             16
 186
 187 /* Operation regions */
 188
 189 #define ACPI_USER_REGION_BEGIN          0x80
 190
 191 /* Maximum space_ids for Operation Regions */
 192
 193 #define ACPI_MAX_ADDRESS_SPACE          255
 194 #define ACPI_NUM_DEFAULT_SPACES         4
 195
 196 /* Array sizes.  Used for range checking also */
 197
 198 #define ACPI_MAX_MATCH_OPCODE           5
 199
 200 /* RSDP checksums */
 201
 202 #define ACPI_RSDP_CHECKSUM_LENGTH       20
 203 #define ACPI_RSDP_XCHECKSUM_LENGTH      36
 204
 205 /* SMBus, GSBus and IPMI bidirectional buffer size */
 206
 207 #define ACPI_SMBUS_BUFFER_SIZE          34
 208 #define ACPI_GSBUS_BUFFER_SIZE          34
 209 #define ACPI_IPMI_BUFFER_SIZE           66
 210
 211 /* _sx_d and _sx_w control methods */
 212
 213 #define ACPI_NUM_sx_d_METHODS           4
 214 #define ACPI_NUM_sx_w_METHODS           5
 215
 216 /******************************************************************************
 217  *
 218  * Miscellaneous constants
 219  *
 220  *****************************************************************************/
 221
 222 /* UUID constants */
 223
 224 #define UUID_BUFFER_LENGTH          16  /* Length of UUID in memory */
 225 #define UUID_STRING_LENGTH          36  /* Total length of a UUID string */
 226
 227 /* Positions for required hyphens (dashes) in UUID strings */
 228
 229 #define UUID_HYPHEN1_OFFSET         8
 230 #define UUID_HYPHEN2_OFFSET         13
 231 #define UUID_HYPHEN3_OFFSET         18
 232 #define UUID_HYPHEN4_OFFSET         23
 233
 234 /******************************************************************************
 235  *
 236  * ACPI AML Debugger
 237  *
 238  *****************************************************************************/
 239
 240 #define ACPI_DEBUGGER_MAX_ARGS          ACPI_METHOD_NUM_ARGS + 4        /* Max command line arguments */
 241 #define ACPI_DB_LINE_BUFFER_SIZE        512
 242
 243 #define ACPI_DEBUGGER_COMMAND_PROMPT    '-'
 244 #define ACPI_DEBUGGER_EXECUTE_PROMPT    '%'
 245
 246 #endif                          /* _ACCONFIG_H */