gpio: add MSIC gpio driver
[linux/fpc-iii.git] / drivers / watchdog / intel_scu_watchdog.c
blob9dda2d08af91a23c8ce8cb50d6f1e584212ec597
1 /*
2 * Intel_SCU 0.2: An Intel SCU IOH Based Watchdog Device
3 * for Intel part #(s):
4 * - AF82MP20 PCH
6 * Copyright (C) 2009-2010 Intel Corporation. All rights reserved.
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of version 2 of the GNU General
10 * Public License as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be
13 * useful, but WITHOUT ANY WARRANTY; without even the implied
14 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
15 * PURPOSE. See the GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public
17 * License along with this program; if not, write to the Free
18 * Software Foundation, Inc., 59 Temple Place - Suite 330,
19 * Boston, MA 02111-1307, USA.
20 * The full GNU General Public License is included in this
21 * distribution in the file called COPYING.
25 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
27 #include <linux/compiler.h>
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/moduleparam.h>
31 #include <linux/types.h>
32 #include <linux/miscdevice.h>
33 #include <linux/watchdog.h>
34 #include <linux/fs.h>
35 #include <linux/notifier.h>
36 #include <linux/reboot.h>
37 #include <linux/init.h>
38 #include <linux/jiffies.h>
39 #include <linux/uaccess.h>
40 #include <linux/slab.h>
41 #include <linux/io.h>
42 #include <linux/interrupt.h>
43 #include <linux/delay.h>
44 #include <linux/sched.h>
45 #include <linux/signal.h>
46 #include <linux/sfi.h>
47 #include <asm/irq.h>
48 #include <linux/atomic.h>
49 #include <asm/intel_scu_ipc.h>
50 #include <asm/apb_timer.h>
51 #include <asm/mrst.h>
53 #include "intel_scu_watchdog.h"
55 /* Bounds number of times we will retry loading time count */
56 /* This retry is a work around for a silicon bug. */
57 #define MAX_RETRY 16
59 #define IPC_SET_WATCHDOG_TIMER 0xF8
61 static int timer_margin = DEFAULT_SOFT_TO_HARD_MARGIN;
62 module_param(timer_margin, int, 0);
63 MODULE_PARM_DESC(timer_margin,
64 "Watchdog timer margin"
65 "Time between interrupt and resetting the system"
66 "The range is from 1 to 160"
67 "This is the time for all keep alives to arrive");
69 static int timer_set = DEFAULT_TIME;
70 module_param(timer_set, int, 0);
71 MODULE_PARM_DESC(timer_set,
72 "Default Watchdog timer setting"
73 "Complete cycle time"
74 "The range is from 1 to 170"
75 "This is the time for all keep alives to arrive");
77 /* After watchdog device is closed, check force_boot. If:
78 * force_boot == 0, then force boot on next watchdog interrupt after close,
79 * force_boot == 1, then force boot immediately when device is closed.
81 static int force_boot;
82 module_param(force_boot, int, 0);
83 MODULE_PARM_DESC(force_boot,
84 "A value of 1 means that the driver will reboot"
85 "the system immediately if the /dev/watchdog device is closed"
86 "A value of 0 means that when /dev/watchdog device is closed"
87 "the watchdog timer will be refreshed for one more interval"
88 "of length: timer_set. At the end of this interval, the"
89 "watchdog timer will reset the system."
92 /* there is only one device in the system now; this can be made into
93 * an array in the future if we have more than one device */
95 static struct intel_scu_watchdog_dev watchdog_device;
97 /* Forces restart, if force_reboot is set */
98 static void watchdog_fire(void)
100 if (force_boot) {
101 pr_crit("Initiating system reboot\n");
102 emergency_restart();
103 pr_crit("Reboot didn't ?????\n");
106 else {
107 pr_crit("Immediate Reboot Disabled\n");
108 pr_crit("System will reset when watchdog timer times out!\n");
112 static int check_timer_margin(int new_margin)
114 if ((new_margin < MIN_TIME_CYCLE) ||
115 (new_margin > MAX_TIME - timer_set)) {
116 pr_debug("value of new_margin %d is out of the range %d to %d\n",
117 new_margin, MIN_TIME_CYCLE, MAX_TIME - timer_set);
118 return -EINVAL;
120 return 0;
124 * IPC operations
126 static int watchdog_set_ipc(int soft_threshold, int threshold)
128 u32 *ipc_wbuf;
129 u8 cbuf[16] = { '\0' };
130 int ipc_ret = 0;
132 ipc_wbuf = (u32 *)&cbuf;
133 ipc_wbuf[0] = soft_threshold;
134 ipc_wbuf[1] = threshold;
136 ipc_ret = intel_scu_ipc_command(
137 IPC_SET_WATCHDOG_TIMER,
139 ipc_wbuf,
141 NULL,
144 if (ipc_ret != 0)
145 pr_err("Error setting SCU watchdog timer: %x\n", ipc_ret);
147 return ipc_ret;
151 * Intel_SCU operations
154 /* timer interrupt handler */
155 static irqreturn_t watchdog_timer_interrupt(int irq, void *dev_id)
157 int int_status;
158 int_status = ioread32(watchdog_device.timer_interrupt_status_addr);
160 pr_debug("irq, int_status: %x\n", int_status);
162 if (int_status != 0)
163 return IRQ_NONE;
165 /* has the timer been started? If not, then this is spurious */
166 if (watchdog_device.timer_started == 0) {
167 pr_debug("spurious interrupt received\n");
168 return IRQ_HANDLED;
171 /* temporarily disable the timer */
172 iowrite32(0x00000002, watchdog_device.timer_control_addr);
174 /* set the timer to the threshold */
175 iowrite32(watchdog_device.threshold,
176 watchdog_device.timer_load_count_addr);
178 /* allow the timer to run */
179 iowrite32(0x00000003, watchdog_device.timer_control_addr);
181 return IRQ_HANDLED;
184 static int intel_scu_keepalive(void)
187 /* read eoi register - clears interrupt */
188 ioread32(watchdog_device.timer_clear_interrupt_addr);
190 /* temporarily disable the timer */
191 iowrite32(0x00000002, watchdog_device.timer_control_addr);
193 /* set the timer to the soft_threshold */
194 iowrite32(watchdog_device.soft_threshold,
195 watchdog_device.timer_load_count_addr);
197 /* allow the timer to run */
198 iowrite32(0x00000003, watchdog_device.timer_control_addr);
200 return 0;
203 static int intel_scu_stop(void)
205 iowrite32(0, watchdog_device.timer_control_addr);
206 return 0;
209 static int intel_scu_set_heartbeat(u32 t)
211 int ipc_ret;
212 int retry_count;
213 u32 soft_value;
214 u32 hw_pre_value;
215 u32 hw_value;
217 watchdog_device.timer_set = t;
218 watchdog_device.threshold =
219 timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
220 watchdog_device.soft_threshold =
221 (watchdog_device.timer_set - timer_margin)
222 * watchdog_device.timer_tbl_ptr->freq_hz;
224 pr_debug("set_heartbeat: timer freq is %d\n",
225 watchdog_device.timer_tbl_ptr->freq_hz);
226 pr_debug("set_heartbeat: timer_set is %x (hex)\n",
227 watchdog_device.timer_set);
228 pr_debug("set_hearbeat: timer_margin is %x (hex)\n", timer_margin);
229 pr_debug("set_heartbeat: threshold is %x (hex)\n",
230 watchdog_device.threshold);
231 pr_debug("set_heartbeat: soft_threshold is %x (hex)\n",
232 watchdog_device.soft_threshold);
234 /* Adjust thresholds by FREQ_ADJUSTMENT factor, to make the */
235 /* watchdog timing come out right. */
236 watchdog_device.threshold =
237 watchdog_device.threshold / FREQ_ADJUSTMENT;
238 watchdog_device.soft_threshold =
239 watchdog_device.soft_threshold / FREQ_ADJUSTMENT;
241 /* temporarily disable the timer */
242 iowrite32(0x00000002, watchdog_device.timer_control_addr);
244 /* send the threshold and soft_threshold via IPC to the processor */
245 ipc_ret = watchdog_set_ipc(watchdog_device.soft_threshold,
246 watchdog_device.threshold);
248 if (ipc_ret != 0) {
249 /* Make sure the watchdog timer is stopped */
250 intel_scu_stop();
251 return ipc_ret;
254 /* Soft Threshold set loop. Early versions of silicon did */
255 /* not always set this count correctly. This loop checks */
256 /* the value and retries if it was not set correctly. */
258 retry_count = 0;
259 soft_value = watchdog_device.soft_threshold & 0xFFFF0000;
260 do {
262 /* Make sure timer is stopped */
263 intel_scu_stop();
265 if (MAX_RETRY < retry_count++) {
266 /* Unable to set timer value */
267 pr_err("Unable to set timer\n");
268 return -ENODEV;
271 /* set the timer to the soft threshold */
272 iowrite32(watchdog_device.soft_threshold,
273 watchdog_device.timer_load_count_addr);
275 /* read count value before starting timer */
276 hw_pre_value = ioread32(watchdog_device.timer_load_count_addr);
277 hw_pre_value = hw_pre_value & 0xFFFF0000;
279 /* Start the timer */
280 iowrite32(0x00000003, watchdog_device.timer_control_addr);
282 /* read the value the time loaded into its count reg */
283 hw_value = ioread32(watchdog_device.timer_load_count_addr);
284 hw_value = hw_value & 0xFFFF0000;
287 } while (soft_value != hw_value);
289 watchdog_device.timer_started = 1;
291 return 0;
295 * /dev/watchdog handling
298 static int intel_scu_open(struct inode *inode, struct file *file)
301 /* Set flag to indicate that watchdog device is open */
302 if (test_and_set_bit(0, &watchdog_device.driver_open))
303 return -EBUSY;
305 /* Check for reopen of driver. Reopens are not allowed */
306 if (watchdog_device.driver_closed)
307 return -EPERM;
309 return nonseekable_open(inode, file);
312 static int intel_scu_release(struct inode *inode, struct file *file)
315 * This watchdog should not be closed, after the timer
316 * is started with the WDIPC_SETTIMEOUT ioctl
317 * If force_boot is set watchdog_fire() will cause an
318 * immediate reset. If force_boot is not set, the watchdog
319 * timer is refreshed for one more interval. At the end
320 * of that interval, the watchdog timer will reset the system.
323 if (!test_and_clear_bit(0, &watchdog_device.driver_open)) {
324 pr_debug("intel_scu_release, without open\n");
325 return -ENOTTY;
328 if (!watchdog_device.timer_started) {
329 /* Just close, since timer has not been started */
330 pr_debug("closed, without starting timer\n");
331 return 0;
334 pr_crit("Unexpected close of /dev/watchdog!\n");
336 /* Since the timer was started, prevent future reopens */
337 watchdog_device.driver_closed = 1;
339 /* Refresh the timer for one more interval */
340 intel_scu_keepalive();
342 /* Reboot system (if force_boot is set) */
343 watchdog_fire();
345 /* We should only reach this point if force_boot is not set */
346 return 0;
349 static ssize_t intel_scu_write(struct file *file,
350 char const *data,
351 size_t len,
352 loff_t *ppos)
355 if (watchdog_device.timer_started)
356 /* Watchdog already started, keep it alive */
357 intel_scu_keepalive();
358 else
359 /* Start watchdog with timer value set by init */
360 intel_scu_set_heartbeat(watchdog_device.timer_set);
362 return len;
365 static long intel_scu_ioctl(struct file *file,
366 unsigned int cmd,
367 unsigned long arg)
369 void __user *argp = (void __user *)arg;
370 u32 __user *p = argp;
371 u32 new_margin;
374 static const struct watchdog_info ident = {
375 .options = WDIOF_SETTIMEOUT
376 | WDIOF_KEEPALIVEPING,
377 .firmware_version = 0, /* @todo Get from SCU via
378 ipc_get_scu_fw_version()? */
379 .identity = "Intel_SCU IOH Watchdog" /* len < 32 */
382 switch (cmd) {
383 case WDIOC_GETSUPPORT:
384 return copy_to_user(argp,
385 &ident,
386 sizeof(ident)) ? -EFAULT : 0;
387 case WDIOC_GETSTATUS:
388 case WDIOC_GETBOOTSTATUS:
389 return put_user(0, p);
390 case WDIOC_KEEPALIVE:
391 intel_scu_keepalive();
393 return 0;
394 case WDIOC_SETTIMEOUT:
395 if (get_user(new_margin, p))
396 return -EFAULT;
398 if (check_timer_margin(new_margin))
399 return -EINVAL;
401 if (intel_scu_set_heartbeat(new_margin))
402 return -EINVAL;
403 return 0;
404 case WDIOC_GETTIMEOUT:
405 return put_user(watchdog_device.soft_threshold, p);
407 default:
408 return -ENOTTY;
413 * Notifier for system down
415 static int intel_scu_notify_sys(struct notifier_block *this,
416 unsigned long code,
417 void *another_unused)
419 if (code == SYS_DOWN || code == SYS_HALT)
420 /* Turn off the watchdog timer. */
421 intel_scu_stop();
422 return NOTIFY_DONE;
426 * Kernel Interfaces
428 static const struct file_operations intel_scu_fops = {
429 .owner = THIS_MODULE,
430 .llseek = no_llseek,
431 .write = intel_scu_write,
432 .unlocked_ioctl = intel_scu_ioctl,
433 .open = intel_scu_open,
434 .release = intel_scu_release,
437 static int __init intel_scu_watchdog_init(void)
439 int ret;
440 u32 __iomem *tmp_addr;
443 * We don't really need to check this as the SFI timer get will fail
444 * but if we do so we can exit with a clearer reason and no noise.
446 * If it isn't an intel MID device then it doesn't have this watchdog
448 if (!mrst_identify_cpu())
449 return -ENODEV;
451 /* Check boot parameters to verify that their initial values */
452 /* are in range. */
453 /* Check value of timer_set boot parameter */
454 if ((timer_set < MIN_TIME_CYCLE) ||
455 (timer_set > MAX_TIME - MIN_TIME_CYCLE)) {
456 pr_err("value of timer_set %x (hex) is out of range from %x to %x (hex)\n",
457 timer_set, MIN_TIME_CYCLE, MAX_TIME - MIN_TIME_CYCLE);
458 return -EINVAL;
461 /* Check value of timer_margin boot parameter */
462 if (check_timer_margin(timer_margin))
463 return -EINVAL;
465 watchdog_device.timer_tbl_ptr = sfi_get_mtmr(sfi_mtimer_num-1);
467 if (watchdog_device.timer_tbl_ptr == NULL) {
468 pr_debug("timer is not available\n");
469 return -ENODEV;
471 /* make sure the timer exists */
472 if (watchdog_device.timer_tbl_ptr->phys_addr == 0) {
473 pr_debug("timer %d does not have valid physical memory\n",
474 sfi_mtimer_num);
475 return -ENODEV;
478 if (watchdog_device.timer_tbl_ptr->irq == 0) {
479 pr_debug("timer %d invalid irq\n", sfi_mtimer_num);
480 return -ENODEV;
483 tmp_addr = ioremap_nocache(watchdog_device.timer_tbl_ptr->phys_addr,
484 20);
486 if (tmp_addr == NULL) {
487 pr_debug("timer unable to ioremap\n");
488 return -ENOMEM;
491 watchdog_device.timer_load_count_addr = tmp_addr++;
492 watchdog_device.timer_current_value_addr = tmp_addr++;
493 watchdog_device.timer_control_addr = tmp_addr++;
494 watchdog_device.timer_clear_interrupt_addr = tmp_addr++;
495 watchdog_device.timer_interrupt_status_addr = tmp_addr++;
497 /* Set the default time values in device structure */
499 watchdog_device.timer_set = timer_set;
500 watchdog_device.threshold =
501 timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
502 watchdog_device.soft_threshold =
503 (watchdog_device.timer_set - timer_margin)
504 * watchdog_device.timer_tbl_ptr->freq_hz;
507 watchdog_device.intel_scu_notifier.notifier_call =
508 intel_scu_notify_sys;
510 ret = register_reboot_notifier(&watchdog_device.intel_scu_notifier);
511 if (ret) {
512 pr_err("cannot register notifier %d)\n", ret);
513 goto register_reboot_error;
516 watchdog_device.miscdev.minor = WATCHDOG_MINOR;
517 watchdog_device.miscdev.name = "watchdog";
518 watchdog_device.miscdev.fops = &intel_scu_fops;
520 ret = misc_register(&watchdog_device.miscdev);
521 if (ret) {
522 pr_err("cannot register miscdev %d err =%d\n",
523 WATCHDOG_MINOR, ret);
524 goto misc_register_error;
527 ret = request_irq((unsigned int)watchdog_device.timer_tbl_ptr->irq,
528 watchdog_timer_interrupt,
529 IRQF_SHARED, "watchdog",
530 &watchdog_device.timer_load_count_addr);
531 if (ret) {
532 pr_err("error requesting irq %d\n", ret);
533 goto request_irq_error;
535 /* Make sure timer is disabled before returning */
536 intel_scu_stop();
537 return 0;
539 /* error cleanup */
541 request_irq_error:
542 misc_deregister(&watchdog_device.miscdev);
543 misc_register_error:
544 unregister_reboot_notifier(&watchdog_device.intel_scu_notifier);
545 register_reboot_error:
546 intel_scu_stop();
547 iounmap(watchdog_device.timer_load_count_addr);
548 return ret;
551 static void __exit intel_scu_watchdog_exit(void)
554 misc_deregister(&watchdog_device.miscdev);
555 unregister_reboot_notifier(&watchdog_device.intel_scu_notifier);
556 /* disable the timer */
557 iowrite32(0x00000002, watchdog_device.timer_control_addr);
558 iounmap(watchdog_device.timer_load_count_addr);
561 late_initcall(intel_scu_watchdog_init);
562 module_exit(intel_scu_watchdog_exit);
564 MODULE_AUTHOR("Intel Corporation");
565 MODULE_DESCRIPTION("Intel SCU Watchdog Device Driver");
566 MODULE_LICENSE("GPL");
567 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
568 MODULE_VERSION(WDT_VER);